Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 939 insertions, 0 deletions

diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
new file mode 100644
index 00000000000..3f36dbaa2bb
--- /dev/null
+++ b/drivers/scsi/aacraid/commsup.c
@@ -0,0 +1,939 @@
+/*
+ *	Adaptec AAC series RAID controller driver
+ *	(c) Copyright 2001 Red Hat Inc.	<alan@redhat.com>
+ *
+ * based on the old aacraid driver that is..
+ * Adaptec aacraid device driver for Linux.
+ *
+ * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Module Name:
+ *  commsup.c
+ *
+ * Abstract: Contain all routines that are required for FSA host/adapter
+ *    commuication.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/completion.h>
+#include <linux/blkdev.h>
+#include <asm/semaphore.h>
+
+#include "aacraid.h"
+
+/**
+ *	fib_map_alloc		-	allocate the fib objects
+ *	@dev: Adapter to allocate for
+ *
+ *	Allocate and map the shared PCI space for the FIB blocks used to
+ *	talk to the Adaptec firmware.
+ */
+ 
+static int fib_map_alloc(struct aac_dev *dev)
+{
+	if((dev->hw_fib_va = pci_alloc_consistent(dev->pdev, sizeof(struct hw_fib) * AAC_NUM_FIB, &dev->hw_fib_pa))==NULL)
+		return -ENOMEM;
+	return 0;
+}
+
+/**
+ *	fib_map_free		-	free the fib objects
+ *	@dev: Adapter to free
+ *
+ *	Free the PCI mappings and the memory allocated for FIB blocks
+ *	on this adapter.
+ */
+
+void fib_map_free(struct aac_dev *dev)
+{
+	pci_free_consistent(dev->pdev, sizeof(struct hw_fib) * AAC_NUM_FIB, dev->hw_fib_va, dev->hw_fib_pa);
+}
+
+/**
+ *	fib_setup	-	setup the fibs
+ *	@dev: Adapter to set up
+ *
+ *	Allocate the PCI space for the fibs, map it and then intialise the
+ *	fib area, the unmapped fib data and also the free list
+ */
+
+int fib_setup(struct aac_dev * dev)
+{
+	struct fib *fibptr;
+	struct hw_fib *hw_fib_va;
+	dma_addr_t hw_fib_pa;
+	int i;
+	
+	if(fib_map_alloc(dev)<0)
+		return -ENOMEM;
+		
+	hw_fib_va = dev->hw_fib_va;
+	hw_fib_pa = dev->hw_fib_pa;
+	memset(hw_fib_va, 0, sizeof(struct hw_fib) * AAC_NUM_FIB);
+	/*
+	 *	Initialise the fibs
+	 */
+	for (i = 0, fibptr = &dev->fibs[i]; i < AAC_NUM_FIB; i++, fibptr++) 
+	{
+		fibptr->dev = dev;
+		fibptr->hw_fib = hw_fib_va;
+		fibptr->data = (void *) fibptr->hw_fib->data;
+		fibptr->next = fibptr+1;	/* Forward chain the fibs */
+		init_MUTEX_LOCKED(&fibptr->event_wait);
+		spin_lock_init(&fibptr->event_lock);
+		hw_fib_va->header.XferState = 0xffffffff;
+		hw_fib_va->header.SenderSize = cpu_to_le16(sizeof(struct hw_fib));
+		fibptr->hw_fib_pa = hw_fib_pa;
+		hw_fib_va = (struct hw_fib *)((unsigned char *)hw_fib_va + sizeof(struct hw_fib));
+		hw_fib_pa = hw_fib_pa + sizeof(struct hw_fib); 
+	}
+	/*
+	 *	Add the fib chain to the free list
+	 */
+	dev->fibs[AAC_NUM_FIB-1].next = NULL;
+	/*
+	 *	Enable this to debug out of queue space
+	 */
+	dev->free_fib = &dev->fibs[0];
+	return 0;
+}
+
+/**
+ *	fib_alloc	-	allocate a fib
+ *	@dev: Adapter to allocate the fib for
+ *
+ *	Allocate a fib from the adapter fib pool. If the pool is empty we
+ *	wait for fibs to become free.
+ */
+ 
+struct fib * fib_alloc(struct aac_dev *dev)
+{
+	struct fib * fibptr;
+	unsigned long flags;
+	spin_lock_irqsave(&dev->fib_lock, flags);
+	fibptr = dev->free_fib;	
+	/* Cannot sleep here or you get hangs. Instead we did the
+	   maths at compile time. */
+	if(!fibptr)
+		BUG();
+	dev->free_fib = fibptr->next;
+	spin_unlock_irqrestore(&dev->fib_lock, flags);
+	/*
+	 *	Set the proper node type code and node byte size
+	 */
+	fibptr->type = FSAFS_NTC_FIB_CONTEXT;
+	fibptr->size = sizeof(struct fib);
+	/*
+	 *	Null out fields that depend on being zero at the start of
+	 *	each I/O
+	 */
+	fibptr->hw_fib->header.XferState = 0;
+	fibptr->callback = NULL;
+	fibptr->callback_data = NULL;
+
+	return fibptr;
+}
+
+/**
+ *	fib_free	-	free a fib
+ *	@fibptr: fib to free up
+ *
+ *	Frees up a fib and places it on the appropriate queue
+ *	(either free or timed out)
+ */
+ 
+void fib_free(struct fib * fibptr)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&fibptr->dev->fib_lock, flags);
+	if (fibptr->flags & FIB_CONTEXT_FLAG_TIMED_OUT) {
+		aac_config.fib_timeouts++;
+		fibptr->next = fibptr->dev->timeout_fib;
+		fibptr->dev->timeout_fib = fibptr;
+	} else {
+		if (fibptr->hw_fib->header.XferState != 0) {
+			printk(KERN_WARNING "fib_free, XferState != 0, fibptr = 0x%p, XferState = 0x%x\n", 
+				 (void*)fibptr, 
+				 le32_to_cpu(fibptr->hw_fib->header.XferState));
+		}
+		fibptr->next = fibptr->dev->free_fib;
+		fibptr->dev->free_fib = fibptr;
+	}	
+	spin_unlock_irqrestore(&fibptr->dev->fib_lock, flags);
+}
+
+/**
+ *	fib_init	-	initialise a fib
+ *	@fibptr: The fib to initialize
+ *	
+ *	Set up the generic fib fields ready for use
+ */
+ 
+void fib_init(struct fib *fibptr)
+{
+	struct hw_fib *hw_fib = fibptr->hw_fib;
+
+	hw_fib->header.StructType = FIB_MAGIC;
+	hw_fib->header.Size = cpu_to_le16(sizeof(struct hw_fib));
+        hw_fib->header.XferState = cpu_to_le32(HostOwned | FibInitialized | FibEmpty | FastResponseCapable);
+	hw_fib->header.SenderFibAddress = cpu_to_le32(fibptr->hw_fib_pa);
+	hw_fib->header.ReceiverFibAddress = cpu_to_le32(fibptr->hw_fib_pa);
+	hw_fib->header.SenderSize = cpu_to_le16(sizeof(struct hw_fib));
+}
+
+/**
+ *	fib_deallocate		-	deallocate a fib
+ *	@fibptr: fib to deallocate
+ *
+ *	Will deallocate and return to the free pool the FIB pointed to by the
+ *	caller.
+ */
+ 
+void fib_dealloc(struct fib * fibptr)
+{
+	struct hw_fib *hw_fib = fibptr->hw_fib;
+	if(hw_fib->header.StructType != FIB_MAGIC) 
+		BUG();
+	hw_fib->header.XferState = 0;        
+}
+
+/*
+ *	Commuication primitives define and support the queuing method we use to
+ *	support host to adapter commuication. All queue accesses happen through
+ *	these routines and are the only routines which have a knowledge of the
+ *	 how these queues are implemented.
+ */
+ 
+/**
+ *	aac_get_entry		-	get a queue entry
+ *	@dev: Adapter
+ *	@qid: Queue Number
+ *	@entry: Entry return
+ *	@index: Index return
+ *	@nonotify: notification control
+ *
+ *	With a priority the routine returns a queue entry if the queue has free entries. If the queue
+ *	is full(no free entries) than no entry is returned and the function returns 0 otherwise 1 is
+ *	returned.
+ */
+ 
+static int aac_get_entry (struct aac_dev * dev, u32 qid, struct aac_entry **entry, u32 * index, unsigned long *nonotify)
+{
+	struct aac_queue * q;
+
+	/*
+	 *	All of the queues wrap when they reach the end, so we check
+	 *	to see if they have reached the end and if they have we just
+	 *	set the index back to zero. This is a wrap. You could or off
+	 *	the high bits in all updates but this is a bit faster I think.
+	 */
+
+	q = &dev->queues->queue[qid];
+	
+	*index = le32_to_cpu(*(q->headers.producer));
+	if ((*index - 2) == le32_to_cpu(*(q->headers.consumer)))
+			*nonotify = 1; 
+
+	if (qid == AdapHighCmdQueue) {
+	        if (*index >= ADAP_HIGH_CMD_ENTRIES)
+        		*index = 0;
+	} else if (qid == AdapNormCmdQueue) {
+	        if (*index >= ADAP_NORM_CMD_ENTRIES) 
+			*index = 0; /* Wrap to front of the Producer Queue. */
+	}
+	else if (qid == AdapHighRespQueue) 
+	{
+	        if (*index >= ADAP_HIGH_RESP_ENTRIES)
+			*index = 0;
+	}
+	else if (qid == AdapNormRespQueue) 
+	{
+		if (*index >= ADAP_NORM_RESP_ENTRIES) 
+			*index = 0; /* Wrap to front of the Producer Queue. */
+	}
+	else {
+		printk("aacraid: invalid qid\n");
+		BUG();
+	}
+
+        if ((*index + 1) == le32_to_cpu(*(q->headers.consumer))) { /* Queue is full */
+		printk(KERN_WARNING "Queue %d full, %d outstanding.\n",
+				qid, q->numpending);
+		return 0;
+	} else {
+	        *entry = q->base + *index;
+		return 1;
+	}
+}   
+
+/**
+ *	aac_queue_get		-	get the next free QE
+ *	@dev: Adapter
+ *	@index: Returned index
+ *	@priority: Priority of fib
+ *	@fib: Fib to associate with the queue entry
+ *	@wait: Wait if queue full
+ *	@fibptr: Driver fib object to go with fib
+ *	@nonotify: Don't notify the adapter
+ *
+ *	Gets the next free QE off the requested priorty adapter command
+ *	queue and associates the Fib with the QE. The QE represented by
+ *	index is ready to insert on the queue when this routine returns
+ *	success.
+ */
+
+static int aac_queue_get(struct aac_dev * dev, u32 * index, u32 qid, struct hw_fib * hw_fib, int wait, struct fib * fibptr, unsigned long *nonotify)
+{
+	struct aac_entry * entry = NULL;
+	int map = 0;
+	struct aac_queue * q = &dev->queues->queue[qid];
+		
+	spin_lock_irqsave(q->lock, q->SavedIrql);
+	    
+	if (qid == AdapHighCmdQueue || qid == AdapNormCmdQueue) 
+	{
+		/*  if no entries wait for some if caller wants to */
+        	while (!aac_get_entry(dev, qid, &entry, index, nonotify)) 
+        	{
+			printk(KERN_ERR "GetEntries failed\n");
+		}
+	        /*
+	         *	Setup queue entry with a command, status and fib mapped
+	         */
+	        entry->size = cpu_to_le32(le16_to_cpu(hw_fib->header.Size));
+	        map = 1;
+	}
+	else if (qid == AdapHighRespQueue || qid == AdapNormRespQueue)
+	{
+	        while(!aac_get_entry(dev, qid, &entry, index, nonotify)) 
+	        {
+			/* if no entries wait for some if caller wants to */
+		}
+        	/*
+        	 *	Setup queue entry with command, status and fib mapped
+        	 */
+        	entry->size = cpu_to_le32(le16_to_cpu(hw_fib->header.Size));
+        	entry->addr = hw_fib->header.SenderFibAddress;
+     			/* Restore adapters pointer to the FIB */
+		hw_fib->header.ReceiverFibAddress = hw_fib->header.SenderFibAddress;	/* Let the adapter now where to find its data */
+        	map = 0;
+	}
+	/*
+	 *	If MapFib is true than we need to map the Fib and put pointers
+	 *	in the queue entry.
+	 */
+	if (map)
+		entry->addr = cpu_to_le32(fibptr->hw_fib_pa);
+	return 0;
+}
+
+
+/**
+ *	aac_insert_entry	-	insert a queue entry
+ *	@dev: Adapter
+ *	@index: Index of entry to insert
+ *	@qid: Queue number
+ *	@nonotify: Suppress adapter notification
+ *
+ *	Gets the next free QE off the requested priorty adapter command
+ *	queue and associates the Fib with the QE. The QE represented by
+ *	index is ready to insert on the queue when this routine returns
+ *	success.
+ */
+ 
+static int aac_insert_entry(struct aac_dev * dev, u32 index, u32 qid, unsigned long nonotify) 
+{
+	struct aac_queue * q = &dev->queues->queue[qid];
+
+	if(q == NULL)
+		BUG();
+	*(q->headers.producer) = cpu_to_le32(index + 1);
+	spin_unlock_irqrestore(q->lock, q->SavedIrql);
+
+	if (qid == AdapHighCmdQueue ||
+	    qid == AdapNormCmdQueue ||
+	    qid == AdapHighRespQueue ||
+	    qid == AdapNormRespQueue)
+	{
+		if (!nonotify)
+			aac_adapter_notify(dev, qid);
+	}
+	else
+		printk("Suprise insert!\n");
+	return 0;
+}
+
+/*
+ *	Define the highest level of host to adapter communication routines. 
+ *	These routines will support host to adapter FS commuication. These 
+ *	routines have no knowledge of the commuication method used. This level
+ *	sends and receives FIBs. This level has no knowledge of how these FIBs
+ *	get passed back and forth.
+ */
+
+/**
+ *	fib_send	-	send a fib to the adapter
+ *	@command: Command to send
+ *	@fibptr: The fib
+ *	@size: Size of fib data area
+ *	@priority: Priority of Fib
+ *	@wait: Async/sync select
+ *	@reply: True if a reply is wanted
+ *	@callback: Called with reply
+ *	@callback_data: Passed to callback
+ *
+ *	Sends the requested FIB to the adapter and optionally will wait for a
+ *	response FIB. If the caller does not wish to wait for a response than
+ *	an event to wait on must be supplied. This event will be set when a
+ *	response FIB is received from the adapter.
+ */
+ 
+int fib_send(u16 command, struct fib * fibptr, unsigned long size,  int priority, int wait, int reply, fib_callback callback, void * callback_data)
+{
+	u32 index;
+	u32 qid;
+	struct aac_dev * dev = fibptr->dev;
+	unsigned long nointr = 0;
+	struct hw_fib * hw_fib = fibptr->hw_fib;
+	struct aac_queue * q;
+	unsigned long flags = 0;
+	if (!(hw_fib->header.XferState & cpu_to_le32(HostOwned)))
+		return -EBUSY;
+	/*
+	 *	There are 5 cases with the wait and reponse requested flags. 
+	 *	The only invalid cases are if the caller requests to wait and
+	 *	does not request a response and if the caller does not want a
+	 *	response and the Fib is not allocated from pool. If a response
+	 *	is not requesed the Fib will just be deallocaed by the DPC
+	 *	routine when the response comes back from the adapter. No
+	 *	further processing will be done besides deleting the Fib. We 
+	 *	will have a debug mode where the adapter can notify the host
+	 *	it had a problem and the host can log that fact.
+	 */
+	if (wait && !reply) {
+		return -EINVAL;
+	} else if (!wait && reply) {
+		hw_fib->header.XferState |= cpu_to_le32(Async | ResponseExpected);
+		FIB_COUNTER_INCREMENT(aac_config.AsyncSent);
+	} else if (!wait && !reply) {
+		hw_fib->header.XferState |= cpu_to_le32(NoResponseExpected);
+		FIB_COUNTER_INCREMENT(aac_config.NoResponseSent);
+	} else if (wait && reply) {
+		hw_fib->header.XferState |= cpu_to_le32(ResponseExpected);
+		FIB_COUNTER_INCREMENT(aac_config.NormalSent);
+	} 
+	/*
+	 *	Map the fib into 32bits by using the fib number
+	 */
+
+	hw_fib->header.SenderFibAddress = cpu_to_le32(((u32)(fibptr-dev->fibs)) << 1);
+	hw_fib->header.SenderData = (u32)(fibptr - dev->fibs);
+	/*
+	 *	Set FIB state to indicate where it came from and if we want a
+	 *	response from the adapter. Also load the command from the
+	 *	caller.
+	 *
+	 *	Map the hw fib pointer as a 32bit value
+	 */
+	hw_fib->header.Command = cpu_to_le16(command);
+	hw_fib->header.XferState |= cpu_to_le32(SentFromHost);
+	fibptr->hw_fib->header.Flags = 0;	/* 0 the flags field - internal only*/
+	/*
+	 *	Set the size of the Fib we want to send to the adapter
+	 */
+	hw_fib->header.Size = cpu_to_le16(sizeof(struct aac_fibhdr) + size);
+	if (le16_to_cpu(hw_fib->header.Size) > le16_to_cpu(hw_fib->header.SenderSize)) {
+		return -EMSGSIZE;
+	}                
+	/*
+	 *	Get a queue entry connect the FIB to it and send an notify
+	 *	the adapter a command is ready.
+	 */
+	if (priority == FsaHigh) {
+		hw_fib->header.XferState |= cpu_to_le32(HighPriority);
+		qid = AdapHighCmdQueue;
+	} else {
+		hw_fib->header.XferState |= cpu_to_le32(NormalPriority);
+		qid = AdapNormCmdQueue;
+	}
+	q = &dev->queues->queue[qid];
+
+	if(wait)
+		spin_lock_irqsave(&fibptr->event_lock, flags);
+	if(aac_queue_get( dev, &index, qid, hw_fib, 1, fibptr, &nointr)<0)
+		return -EWOULDBLOCK;
+	dprintk((KERN_DEBUG "fib_send: inserting a queue entry at index %d.\n",index));
+	dprintk((KERN_DEBUG "Fib contents:.\n"));
+	dprintk((KERN_DEBUG "  Command =               %d.\n", hw_fib->header.Command));
+	dprintk((KERN_DEBUG "  XferState  =            %x.\n", hw_fib->header.XferState));
+	dprintk((KERN_DEBUG "  hw_fib va being sent=%p\n",fibptr->hw_fib));
+	dprintk((KERN_DEBUG "  hw_fib pa being sent=%lx\n",(ulong)fibptr->hw_fib_pa));
+	dprintk((KERN_DEBUG "  fib being sent=%p\n",fibptr));
+	/*
+	 *	Fill in the Callback and CallbackContext if we are not
+	 *	going to wait.
+	 */
+	if (!wait) {
+		fibptr->callback = callback;
+		fibptr->callback_data = callback_data;
+	}
+	FIB_COUNTER_INCREMENT(aac_config.FibsSent);
+	list_add_tail(&fibptr->queue, &q->pendingq);
+	q->numpending++;
+
+	fibptr->done = 0;
+	fibptr->flags = 0;
+
+	if(aac_insert_entry(dev, index, qid, (nointr & aac_config.irq_mod)) < 0)
+		return -EWOULDBLOCK;
+	/*
+	 *	If the caller wanted us to wait for response wait now. 
+	 */
+    
+	if (wait) {
+		spin_unlock_irqrestore(&fibptr->event_lock, flags);
+		down(&fibptr->event_wait);
+		if(fibptr->done == 0)
+			BUG();
+			
+		if((fibptr->flags & FIB_CONTEXT_FLAG_TIMED_OUT)){
+			return -ETIMEDOUT;
+		} else {
+			return 0;
+		}
+	}
+	/*
+	 *	If the user does not want a response than return success otherwise
+	 *	return pending
+	 */
+	if (reply)
+		return -EINPROGRESS;
+	else
+		return 0;
+}
+
+/** 
+ *	aac_consumer_get	-	get the top of the queue
+ *	@dev: Adapter
+ *	@q: Queue
+ *	@entry: Return entry
+ *
+ *	Will return a pointer to the entry on the top of the queue requested that
+ * 	we are a consumer of, and return the address of the queue entry. It does
+ *	not change the state of the queue. 
+ */
+
+int aac_consumer_get(struct aac_dev * dev, struct aac_queue * q, struct aac_entry **entry)
+{
+	u32 index;
+	int status;
+	if (le32_to_cpu(*q->headers.producer) == le32_to_cpu(*q->headers.consumer)) {
+		status = 0;
+	} else {
+		/*
+		 *	The consumer index must be wrapped if we have reached
+		 *	the end of the queue, else we just use the entry
+		 *	pointed to by the header index
+		 */
+		if (le32_to_cpu(*q->headers.consumer) >= q->entries) 
+			index = 0;		
+		else
+		        index = le32_to_cpu(*q->headers.consumer);
+		*entry = q->base + index;
+		status = 1;
+	}
+	return(status);
+}
+
+/**
+ *	aac_consumer_free	-	free consumer entry
+ *	@dev: Adapter
+ *	@q: Queue
+ *	@qid: Queue ident
+ *
+ *	Frees up the current top of the queue we are a consumer of. If the
+ *	queue was full notify the producer that the queue is no longer full.
+ */
+
+void aac_consumer_free(struct aac_dev * dev, struct aac_queue *q, u32 qid)
+{
+	int wasfull = 0;
+	u32 notify;
+
+	if ((le32_to_cpu(*q->headers.producer)+1) == le32_to_cpu(*q->headers.consumer))
+		wasfull = 1;
+        
+	if (le32_to_cpu(*q->headers.consumer) >= q->entries)
+		*q->headers.consumer = cpu_to_le32(1);
+	else
+		*q->headers.consumer = cpu_to_le32(le32_to_cpu(*q->headers.consumer)+1);
+        
+	if (wasfull) {
+		switch (qid) {
+
+		case HostNormCmdQueue:
+			notify = HostNormCmdNotFull;
+			break;
+		case HostHighCmdQueue:
+			notify = HostHighCmdNotFull;
+			break;
+		case HostNormRespQueue:
+			notify = HostNormRespNotFull;
+			break;
+		case HostHighRespQueue:
+			notify = HostHighRespNotFull;
+			break;
+		default:
+			BUG();
+			return;
+		}
+		aac_adapter_notify(dev, notify);
+	}
+}        
+
+/**
+ *	fib_adapter_complete	-	complete adapter issued fib
+ *	@fibptr: fib to complete
+ *	@size: size of fib
+ *
+ *	Will do all necessary work to complete a FIB that was sent from
+ *	the adapter.
+ */
+
+int fib_adapter_complete(struct fib * fibptr, unsigned short size)
+{
+	struct hw_fib * hw_fib = fibptr->hw_fib;
+	struct aac_dev * dev = fibptr->dev;
+	unsigned long nointr = 0;
+	if (hw_fib->header.XferState == 0)
+        	return 0;
+	/*
+	 *	If we plan to do anything check the structure type first.
+	 */ 
+	if ( hw_fib->header.StructType != FIB_MAGIC ) {
+        	return -EINVAL;
+	}
+	/*
+	 *	This block handles the case where the adapter had sent us a
+	 *	command and we have finished processing the command. We
+	 *	call completeFib when we are done processing the command 
+	 *	and want to send a response back to the adapter. This will 
+	 *	send the completed cdb to the adapter.
+	 */
+	if (hw_fib->header.XferState & cpu_to_le32(SentFromAdapter)) {
+	        hw_fib->header.XferState |= cpu_to_le32(HostProcessed);
+	        if (hw_fib->header.XferState & cpu_to_le32(HighPriority)) {
+        		u32 index;
+       			if (size) 
+			{
+				size += sizeof(struct aac_fibhdr);
+				if (size > le16_to_cpu(hw_fib->header.SenderSize))
+					return -EMSGSIZE;
+				hw_fib->header.Size = cpu_to_le16(size);
+			}
+			if(aac_queue_get(dev, &index, AdapHighRespQueue, hw_fib, 1, NULL, &nointr) < 0) {
+				return -EWOULDBLOCK;
+			}
+			if (aac_insert_entry(dev, index, AdapHighRespQueue,  (nointr & (int)aac_config.irq_mod)) != 0) {
+			}
+		}
+		else if (hw_fib->header.XferState & NormalPriority) 
+		{
+			u32 index;
+
+			if (size) {
+				size += sizeof(struct aac_fibhdr);
+				if (size > le16_to_cpu(hw_fib->header.SenderSize)) 
+					return -EMSGSIZE;
+				hw_fib->header.Size = cpu_to_le16(size);
+			}
+			if (aac_queue_get(dev, &index, AdapNormRespQueue, hw_fib, 1, NULL, &nointr) < 0) 
+				return -EWOULDBLOCK;
+			if (aac_insert_entry(dev, index, AdapNormRespQueue, (nointr & (int)aac_config.irq_mod)) != 0) 
+			{
+			}
+		}
+	}
+	else 
+	{
+        	printk(KERN_WARNING "fib_adapter_complete: Unknown xferstate detected.\n");
+        	BUG();
+	}   
+	return 0;
+}
+
+/**
+ *	fib_complete	-	fib completion handler
+ *	@fib: FIB to complete
+ *
+ *	Will do all necessary work to complete a FIB.
+ */
+ 
+int fib_complete(struct fib * fibptr)
+{
+	struct hw_fib * hw_fib = fibptr->hw_fib;
+
+	/*
+	 *	Check for a fib which has already been completed
+	 */
+
+	if (hw_fib->header.XferState == 0)
+        	return 0;
+	/*
+	 *	If we plan to do anything check the structure type first.
+	 */ 
+
+	if (hw_fib->header.StructType != FIB_MAGIC)
+	        return -EINVAL;
+	/*
+	 *	This block completes a cdb which orginated on the host and we 
+	 *	just need to deallocate the cdb or reinit it. At this point the
+	 *	command is complete that we had sent to the adapter and this
+	 *	cdb could be reused.
+	 */
+	if((hw_fib->header.XferState & cpu_to_le32(SentFromHost)) &&
+		(hw_fib->header.XferState & cpu_to_le32(AdapterProcessed)))
+	{
+		fib_dealloc(fibptr);
+	}
+	else if(hw_fib->header.XferState & cpu_to_le32(SentFromHost))
+	{
+		/*
+		 *	This handles the case when the host has aborted the I/O
+		 *	to the adapter because the adapter is not responding
+		 */
+		fib_dealloc(fibptr);
+	} else if(hw_fib->header.XferState & cpu_to_le32(HostOwned)) {
+		fib_dealloc(fibptr);
+	} else {
+		BUG();
+	}   
+	return 0;
+}
+
+/**
+ *	aac_printf	-	handle printf from firmware
+ *	@dev: Adapter
+ *	@val: Message info
+ *
+ *	Print a message passed to us by the controller firmware on the
+ *	Adaptec board
+ */
+
+void aac_printf(struct aac_dev *dev, u32 val)
+{
+	int length = val & 0xffff;
+	int level = (val >> 16) & 0xffff;
+	char *cp = dev->printfbuf;
+	
+	/*
+	 *	The size of the printfbuf is set in port.c
+	 *	There is no variable or define for it
+	 */
+	if (length > 255)
+		length = 255;
+	if (cp[length] != 0)
+		cp[length] = 0;
+	if (level == LOG_AAC_HIGH_ERROR)
+		printk(KERN_WARNING "aacraid:%s", cp);
+	else
+		printk(KERN_INFO "aacraid:%s", cp);
+	memset(cp, 0,  256);
+}
+
+/**
+ *	aac_command_thread	-	command processing thread
+ *	@dev: Adapter to monitor
+ *
+ *	Waits on the commandready event in it's queue. When the event gets set
+ *	it will pull FIBs off it's queue. It will continue to pull FIBs off
+ *	until the queue is empty. When the queue is empty it will wait for
+ *	more FIBs.
+ */
+ 
+int aac_command_thread(struct aac_dev * dev)
+{
+	struct hw_fib *hw_fib, *hw_newfib;
+	struct fib *fib, *newfib;
+	struct aac_queue_block *queues = dev->queues;
+	struct aac_fib_context *fibctx;
+	unsigned long flags;
+	DECLARE_WAITQUEUE(wait, current);
+
+	/*
+	 *	We can only have one thread per adapter for AIF's.
+	 */
+	if (dev->aif_thread)
+		return -EINVAL;
+	/*
+	 *	Set up the name that will appear in 'ps'
+	 *	stored in  task_struct.comm[16].
+	 */
+	daemonize("aacraid");
+	allow_signal(SIGKILL);
+	/*
+	 *	Let the DPC know it has a place to send the AIF's to.
+	 */
+	dev->aif_thread = 1;
+	add_wait_queue(&queues->queue[HostNormCmdQueue].cmdready, &wait);
+	set_current_state(TASK_INTERRUPTIBLE);
+	while(1) 
+	{
+		spin_lock_irqsave(queues->queue[HostNormCmdQueue].lock, flags);
+		while(!list_empty(&(queues->queue[HostNormCmdQueue].cmdq))) {
+			struct list_head *entry;
+			struct aac_aifcmd * aifcmd;
+
+			set_current_state(TASK_RUNNING);
+		
+			entry = queues->queue[HostNormCmdQueue].cmdq.next;
+			list_del(entry);
+			
+			spin_unlock_irqrestore(queues->queue[HostNormCmdQueue].lock, flags);
+			fib = list_entry(entry, struct fib, fiblink);
+			/*
+			 *	We will process the FIB here or pass it to a 
+			 *	worker thread that is TBD. We Really can't 
+			 *	do anything at this point since we don't have
+			 *	anything defined for this thread to do.
+			 */
+			hw_fib = fib->hw_fib;
+			memset(fib, 0, sizeof(struct fib));
+			fib->type = FSAFS_NTC_FIB_CONTEXT;
+			fib->size = sizeof( struct fib );
+			fib->hw_fib = hw_fib;
+			fib->data = hw_fib->data;
+			fib->dev = dev;
+			/*
+			 *	We only handle AifRequest fibs from the adapter.
+			 */
+			aifcmd = (struct aac_aifcmd *) hw_fib->data;
+			if (aifcmd->command == cpu_to_le32(AifCmdDriverNotify)) {
+				/* Handle Driver Notify Events */
+				*(u32 *)hw_fib->data = cpu_to_le32(ST_OK);
+				fib_adapter_complete(fib, sizeof(u32));
+			} else {
+				struct list_head *entry;
+				/* The u32 here is important and intended. We are using
+				   32bit wrapping time to fit the adapter field */
+				   
+				u32 time_now, time_last;
+				unsigned long flagv;
+				
+				time_now = jiffies/HZ;
+
+				spin_lock_irqsave(&dev->fib_lock, flagv);
+				entry = dev->fib_list.next;
+				/*
+				 * For each Context that is on the 
+				 * fibctxList, make a copy of the
+				 * fib, and then set the event to wake up the
+				 * thread that is waiting for it.
+				 */
+				while (entry != &dev->fib_list) {
+					/*
+					 * Extract the fibctx
+					 */
+					fibctx = list_entry(entry, struct aac_fib_context, next);
+					/*
+					 * Check if the queue is getting
+					 * backlogged
+					 */
+					if (fibctx->count > 20)
+					{
+						/*
+						 * It's *not* jiffies folks,
+						 * but jiffies / HZ so do not
+						 * panic ...
+						 */
+						time_last = fibctx->jiffies;
+						/*
+						 * Has it been > 2 minutes 
+						 * since the last read off
+						 * the queue?
+						 */
+						if ((time_now - time_last) > 120) {
+							entry = entry->next;
+							aac_close_fib_context(dev, fibctx);
+							continue;
+						}
+					}
+					/*
+					 * Warning: no sleep allowed while
+					 * holding spinlock
+					 */
+					hw_newfib = kmalloc(sizeof(struct hw_fib), GFP_ATOMIC);
+					newfib = kmalloc(sizeof(struct fib), GFP_ATOMIC);
+					if (newfib && hw_newfib) {
+						/*
+						 * Make the copy of the FIB
+						 */
+						memcpy(hw_newfib, hw_fib, sizeof(struct hw_fib));
+						memcpy(newfib, fib, sizeof(struct fib));
+						newfib->hw_fib = hw_newfib;
+						/*
+						 * Put the FIB onto the
+						 * fibctx's fibs
+						 */
+						list_add_tail(&newfib->fiblink, &fibctx->fib_list);
+						fibctx->count++;
+						/* 
+						 * Set the event to wake up the
+						 * thread that will waiting.
+						 */
+						up(&fibctx->wait_sem);
+					} else {
+						printk(KERN_WARNING "aifd: didn't allocate NewFib.\n");
+						if(newfib)
+							kfree(newfib);
+						if(hw_newfib)
+							kfree(hw_newfib);
+					}
+					entry = entry->next;
+				}
+				/*
+				 *	Set the status of this FIB
+				 */
+				*(u32 *)hw_fib->data = cpu_to_le32(ST_OK);
+				fib_adapter_complete(fib, sizeof(u32));
+				spin_unlock_irqrestore(&dev->fib_lock, flagv);
+			}
+			spin_lock_irqsave(queues->queue[HostNormCmdQueue].lock, flags);
+			kfree(fib);
+		}
+		/*
+		 *	There are no more AIF's
+		 */
+		spin_unlock_irqrestore(queues->queue[HostNormCmdQueue].lock, flags);
+		schedule();
+
+		if(signal_pending(current))
+			break;
+		set_current_state(TASK_INTERRUPTIBLE);
+	}
+	remove_wait_queue(&queues->queue[HostNormCmdQueue].cmdready, &wait);
+	dev->aif_thread = 0;
+	complete_and_exit(&dev->aif_completion, 0);
+}