Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (97 commits)
  [SCSI] zfcp: removed wrong comment
  [SCSI] zfcp: use of uninitialized variable
  [SCSI] zfcp: Invalid locking order
  [SCSI] aic79xx: use dma_get_required_mask()
  [SCSI] aic79xx: fix bracket mismatch in unused macro
  [SCSI] BusLogic: Replace 'boolean' by 'bool'
  [SCSI] advansys: clean up warnings
  [SCSI] 53c7xx: brackets fix in uncompiled code
  [SCSI] nsp_cs: remove old scsi code
  [SCSI] aic79xx: make ahd_match_scb() static
  [SCSI] DAC960: kmalloc->kzalloc/Casting cleanups
  [SCSI] scsi_kmap_atomic_sg(): check that local irqs are disabled
  [SCSI] Buslogic: local_irq_disable() is redundant after local_irq_save()
  [SCSI] aic94xx: update for v28 firmware
  [SCSI] scsi_error: Fix lost EH commands
  [SCSI] aic94xx: Add default bus reset handler
  [SCSI] aic94xx: Remove TMF result code munging
  [SCSI] libsas: Add an LU reset mechanism to the error handler
  [SCSI] libsas: Don't BUG when connecting two expanders via wide port
  [SCSI] st: fix Tape dies if wrong block size used, bug 7919
  ...

1 files changed, 24 insertions, 9 deletions

diff --git a/drivers/scsi/aacraid/sa.c b/drivers/scsi/aacraid/sa.c
index 511b0a938fb..8535db068c2 100644
--- a/drivers/scsi/aacraid/sa.c
+++ b/drivers/scsi/aacraid/sa.c
@@ -92,6 +92,17 @@ static void aac_sa_disable_interrupt (struct aac_dev *dev)
 }
 
 /**
+ *	aac_sa_enable_interrupt	-	enable interrupt
+ *	@dev: Which adapter to enable.
+ */
+
+static void aac_sa_enable_interrupt (struct aac_dev *dev)
+{
+	sa_writew(dev, SaDbCSR.PRICLEARIRQMASK, (PrintfReady | DOORBELL_1 |
+				DOORBELL_2 | DOORBELL_3 | DOORBELL_4));
+}
+
+/**
  *	aac_sa_notify_adapter		-	handle adapter notification
  *	@dev:	Adapter that notification is for
  *	@event:	Event to notidy
@@ -347,32 +358,36 @@ int aac_sa_init(struct aac_dev *dev)
 		msleep(1);
 	}
 
-	if (request_irq(dev->scsi_host_ptr->irq, aac_sa_intr, IRQF_SHARED|IRQF_DISABLED, "aacraid", (void *)dev ) < 0) {
-		printk(KERN_WARNING "%s%d: Interrupt unavailable.\n", name, instance);
-		goto error_iounmap;
-	}
-
 	/*
 	 *	Fill in the function dispatch table.
 	 */
 
 	dev->a_ops.adapter_interrupt = aac_sa_interrupt_adapter;
 	dev->a_ops.adapter_disable_int = aac_sa_disable_interrupt;
+	dev->a_ops.adapter_enable_int = aac_sa_enable_interrupt;
 	dev->a_ops.adapter_notify = aac_sa_notify_adapter;
 	dev->a_ops.adapter_sync_cmd = sa_sync_cmd;
 	dev->a_ops.adapter_check_health = aac_sa_check_health;
+	dev->a_ops.adapter_intr = aac_sa_intr;
 	dev->a_ops.adapter_ioremap = aac_sa_ioremap;
 
 	/*
 	 *	First clear out all interrupts.  Then enable the one's that 
 	 *	we can handle.
 	 */
-	sa_writew(dev, SaDbCSR.PRISETIRQMASK, 0xffff);
-	sa_writew(dev, SaDbCSR.PRICLEARIRQMASK, (PrintfReady | DOORBELL_1 | 
-				DOORBELL_2 | DOORBELL_3 | DOORBELL_4));
+	aac_adapter_disable_int(dev);
+	aac_adapter_enable_int(dev);
 
 	if(aac_init_adapter(dev) == NULL)
 		goto error_irq;
+	if (request_irq(dev->scsi_host_ptr->irq, dev->a_ops.adapter_intr,
+			IRQF_SHARED|IRQF_DISABLED,
+			"aacraid", (void *)dev ) < 0) {
+		printk(KERN_WARNING "%s%d: Interrupt unavailable.\n",
+			name, instance);
+		goto error_iounmap;
+	}
+	aac_adapter_enable_int(dev);
 
 	/*
 	 *	Tell the adapter that all is configure, and it can start 
@@ -382,7 +397,7 @@ int aac_sa_init(struct aac_dev *dev)
 	return 0;
 
 error_irq:
-	sa_writew(dev, SaDbCSR.PRISETIRQMASK, 0xffff);
+	aac_sa_disable_interrupt(dev);
 	free_irq(dev->scsi_host_ptr->irq, (void *)dev);
 
 error_iounmap: