Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 466 insertions, 0 deletions

diff --git a/drivers/scsi/atari_dma_emul.c b/drivers/scsi/atari_dma_emul.c
new file mode 100644
index 00000000000..7026045527f
--- /dev/null
+++ b/drivers/scsi/atari_dma_emul.c
@@ -0,0 +1,466 @@
+/*
+ * atari_dma_emul.c -- TT SCSI DMA emulator for the Hades.
+ *
+ * Copyright 1997 Wout Klaren <W.Klaren@inter.nl.net>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ *
+ * This code was written using the Hades TOS source code as a
+ * reference. This source code can be found on the home page
+ * of Medusa Computer Systems.
+ *
+ * Version 0.1, 1997-09-24.
+ * 
+ * This code should be considered experimental. It has only been
+ * tested on a Hades with a 68060. It might not work on a Hades
+ * with a 68040. Make backups of your hard drives before using
+ * this code.
+ */
+
+#include <asm/uaccess.h>
+
+#define hades_dma_ctrl		(*(unsigned char *) 0xffff8717)
+#define hades_psdm_reg		(*(unsigned char *) 0xffff8741)
+
+#define TRANSFER_SIZE		16
+
+struct m68040_frame {
+	unsigned long  effaddr;  /* effective address */
+	unsigned short ssw;      /* special status word */
+	unsigned short wb3s;     /* write back 3 status */
+	unsigned short wb2s;     /* write back 2 status */
+	unsigned short wb1s;     /* write back 1 status */
+	unsigned long  faddr;    /* fault address */
+	unsigned long  wb3a;     /* write back 3 address */
+	unsigned long  wb3d;     /* write back 3 data */
+	unsigned long  wb2a;     /* write back 2 address */
+	unsigned long  wb2d;     /* write back 2 data */
+	unsigned long  wb1a;     /* write back 1 address */
+	unsigned long  wb1dpd0;  /* write back 1 data/push data 0*/
+	unsigned long  pd1;      /* push data 1*/
+	unsigned long  pd2;      /* push data 2*/
+	unsigned long  pd3;      /* push data 3*/
+};
+
+static void writeback (unsigned short wbs, unsigned long wba,
+		       unsigned long wbd, void *old_buserr)
+{
+	mm_segment_t fs = get_fs();
+	static void *save_buserr;
+
+	__asm__ __volatile__ ("movec.l	%%vbr,%%a0\n\t"
+			      "move.l	%0,8(%%a0)\n\t"
+			      :
+			      : "r" (&&bus_error)
+			      : "a0" );
+
+	save_buserr = old_buserr;
+
+	set_fs (MAKE_MM_SEG(wbs & WBTM_040));
+
+	switch (wbs & WBSIZ_040) {
+	    case BA_SIZE_BYTE:
+		put_user (wbd & 0xff, (char *)wba);
+		break;
+	    case BA_SIZE_WORD:
+		put_user (wbd & 0xffff, (short *)wba);
+		break;
+	    case BA_SIZE_LONG:
+		put_user (wbd, (int *)wba);
+		break;
+	}
+
+	set_fs (fs);
+	return;
+
+bus_error:
+	__asm__ __volatile__ ("cmp.l	%0,2(%%sp)\n\t"
+			      "bcs.s	.jump_old\n\t"
+			      "cmp.l	%1,2(%%sp)\n\t"
+			      "bls.s	.restore_old\n"
+			".jump_old:\n\t"
+			      "move.l	%2,-(%%sp)\n\t"
+			      "rts\n"
+			".restore_old:\n\t"
+			      "move.l	%%a0,-(%%sp)\n\t"
+			      "movec.l	%%vbr,%%a0\n\t"
+			      "move.l	%2,8(%%a0)\n\t"
+			      "move.l	(%%sp)+,%%a0\n\t"
+			      "rte\n\t"
+			      :
+			      : "i" (writeback), "i" (&&bus_error),
+			        "m" (save_buserr) );
+}
+
+/*
+ * static inline void set_restdata_reg(unsigned char *cur_addr)
+ *
+ * Set the rest data register if necessary.
+ */
+
+static inline void set_restdata_reg(unsigned char *cur_addr)
+{
+	if (((long) cur_addr & ~3) != 0)
+		tt_scsi_dma.dma_restdata =
+			*((unsigned long *) ((long) cur_addr & ~3));
+}
+
+/*
+ * void hades_dma_emulator(int irq, void *dummy, struct pt_regs *fp)
+ * 
+ * This code emulates TT SCSI DMA on the Hades.
+ * 
+ * Note the following:
+ * 
+ * 1. When there is no byte available to read from the SCSI bus, or
+ *    when a byte cannot yet bet written to the SCSI bus, a bus
+ *    error occurs when reading or writing the pseudo DMA data
+ *    register (hades_psdm_reg). We have to catch this bus error
+ *    and try again to read or write the byte. If after several tries
+ *    we still get a bus error, the interrupt handler is left. When
+ *    the byte can be read or written, the interrupt handler is
+ *    called again.
+ * 
+ * 2. The SCSI interrupt must be disabled in this interrupt handler.
+ * 
+ * 3. If we set the EOP signal, the SCSI controller still expects one
+ *    byte to be read or written. Therefore the last byte is transferred
+ *    separately, after setting the EOP signal.
+ * 
+ * 4. When this function is left, the address pointer (start_addr) is
+ *    converted to a physical address. Because it points one byte
+ *    further than the last transferred byte, it can point outside the
+ *    current page. If virt_to_phys() is called with this address we
+ *    might get an access error. Therefore virt_to_phys() is called with
+ *    start_addr - 1 if the count has reached zero. The result is
+ *    increased with one.
+ */
+
+static irqreturn_t hades_dma_emulator(int irq, void *dummy, struct pt_regs *fp)
+{
+	unsigned long dma_base;
+	register unsigned long dma_cnt asm ("d3");
+	static long save_buserr;
+	register unsigned long save_sp asm ("d4");
+	register int tries asm ("d5");
+	register unsigned char *start_addr asm ("a3"), *end_addr asm ("a4");
+	register unsigned char *eff_addr;
+	register unsigned char *psdm_reg;
+	unsigned long rem;
+
+	atari_disable_irq(IRQ_TT_MFP_SCSI);
+
+	/*
+	 * Read the dma address and count registers.
+	 */
+
+	dma_base = SCSI_DMA_READ_P(dma_addr);
+	dma_cnt = SCSI_DMA_READ_P(dma_cnt);
+
+	/*
+	 * Check if DMA is still enabled.
+	 */
+
+	if ((tt_scsi_dma.dma_ctrl & 2) == 0)
+	{
+		atari_enable_irq(IRQ_TT_MFP_SCSI);
+		return IRQ_HANDLED;
+	}
+
+	if (dma_cnt == 0)
+	{
+		printk(KERN_NOTICE "DMA emulation: count is zero.\n");
+		tt_scsi_dma.dma_ctrl &= 0xfd;	/* DMA ready. */
+		atari_enable_irq(IRQ_TT_MFP_SCSI);
+		return IRQ_HANDLED;
+	}
+
+	/*
+	 * Install new bus error routine.
+	 */
+
+	__asm__ __volatile__ ("movec.l	%%vbr,%%a0\n\t"
+			      "move.l	8(%%a0),%0\n\t"
+			      "move.l	%1,8(%%a0)\n\t"
+			      : "=&r" (save_buserr)
+			      : "r" (&&scsi_bus_error)
+			      : "a0" );
+
+	hades_dma_ctrl &= 0xfc;		/* Bus error and EOP off. */
+
+	/*
+	 * Save the stack pointer.
+	 */
+
+	__asm__ __volatile__ ("move.l	%%sp,%0\n\t"
+			      : "=&r" (save_sp) );
+
+	tries = 100;			/* Maximum number of bus errors. */
+	start_addr = phys_to_virt(dma_base);
+	end_addr = start_addr + dma_cnt;
+
+scsi_loop:
+	dma_cnt--;
+	rem = dma_cnt & (TRANSFER_SIZE - 1);
+	dma_cnt &= ~(TRANSFER_SIZE - 1);
+	psdm_reg = &hades_psdm_reg;
+
+	if (tt_scsi_dma.dma_ctrl & 1)	/* Read or write? */
+	{
+		/*
+		 * SCSI write. Abort when count is zero.
+		 */
+
+		switch (rem)
+		{
+		case 0:
+			while (dma_cnt > 0)
+			{
+				dma_cnt -= TRANSFER_SIZE;
+
+				*psdm_reg = *start_addr++;
+		case 15:
+				*psdm_reg = *start_addr++;
+		case 14:
+				*psdm_reg = *start_addr++;
+		case 13:
+				*psdm_reg = *start_addr++;
+		case 12:
+				*psdm_reg = *start_addr++;
+		case 11:
+				*psdm_reg = *start_addr++;
+		case 10:
+				*psdm_reg = *start_addr++;
+		case 9:
+				*psdm_reg = *start_addr++;
+		case 8:
+				*psdm_reg = *start_addr++;
+		case 7:
+				*psdm_reg = *start_addr++;
+		case 6:
+				*psdm_reg = *start_addr++;
+		case 5:
+				*psdm_reg = *start_addr++;
+		case 4:
+				*psdm_reg = *start_addr++;
+		case 3:
+				*psdm_reg = *start_addr++;
+		case 2:
+				*psdm_reg = *start_addr++;
+		case 1:
+				*psdm_reg = *start_addr++;
+			}
+		}
+
+		hades_dma_ctrl |= 1;	/* Set EOP. */
+		udelay(10);
+		*psdm_reg = *start_addr++;	/* Dummy byte. */
+		tt_scsi_dma.dma_ctrl &= 0xfd;	/* DMA ready. */
+	}
+	else
+	{
+		/*
+		 * SCSI read. Abort when count is zero.
+		 */
+
+		switch (rem)
+		{
+		case 0:
+			while (dma_cnt > 0)
+			{
+				dma_cnt -= TRANSFER_SIZE;
+
+				*start_addr++ = *psdm_reg;
+		case 15:
+				*start_addr++ = *psdm_reg;
+		case 14:
+				*start_addr++ = *psdm_reg;
+		case 13:
+				*start_addr++ = *psdm_reg;
+		case 12:
+				*start_addr++ = *psdm_reg;
+		case 11:
+				*start_addr++ = *psdm_reg;
+		case 10:
+				*start_addr++ = *psdm_reg;
+		case 9:
+				*start_addr++ = *psdm_reg;
+		case 8:
+				*start_addr++ = *psdm_reg;
+		case 7:
+				*start_addr++ = *psdm_reg;
+		case 6:
+				*start_addr++ = *psdm_reg;
+		case 5:
+				*start_addr++ = *psdm_reg;
+		case 4:
+				*start_addr++ = *psdm_reg;
+		case 3:
+				*start_addr++ = *psdm_reg;
+		case 2:
+				*start_addr++ = *psdm_reg;
+		case 1:
+				*start_addr++ = *psdm_reg;
+			}
+		}
+
+		hades_dma_ctrl |= 1;	/* Set EOP. */
+		udelay(10);
+		*start_addr++ = *psdm_reg;
+		tt_scsi_dma.dma_ctrl &= 0xfd;	/* DMA ready. */
+
+		set_restdata_reg(start_addr);
+	}
+
+	if (start_addr != end_addr)
+		printk(KERN_CRIT "DMA emulation: FATAL: Count is not zero at end of transfer.\n");
+
+	dma_cnt = end_addr - start_addr;
+
+scsi_end:
+	dma_base = (dma_cnt == 0) ? virt_to_phys(start_addr - 1) + 1 :  
+				    virt_to_phys(start_addr);
+
+	SCSI_DMA_WRITE_P(dma_addr, dma_base);
+	SCSI_DMA_WRITE_P(dma_cnt, dma_cnt);
+
+	/*
+	 * Restore old bus error routine.
+	 */
+
+	__asm__ __volatile__ ("movec.l	%%vbr,%%a0\n\t"
+			      "move.l	%0,8(%%a0)\n\t"
+			      :
+			      : "r" (save_buserr)
+			      : "a0" );
+
+	atari_enable_irq(IRQ_TT_MFP_SCSI);
+
+	return IRQ_HANDLED;
+
+scsi_bus_error:
+	/*
+	 * First check if the bus error is caused by our code.
+	 * If not, call the original handler.
+	 */
+
+	__asm__ __volatile__ ("cmp.l	%0,2(%%sp)\n\t"
+			      "bcs.s	.old_vector\n\t"
+			      "cmp.l	%1,2(%%sp)\n\t"
+			      "bls.s	.scsi_buserr\n"
+			".old_vector:\n\t"
+			      "move.l	%2,-(%%sp)\n\t"
+			      "rts\n"
+			".scsi_buserr:\n\t"
+			      :
+			      : "i" (&&scsi_loop), "i" (&&scsi_end),
+			        "m" (save_buserr) );
+
+	if (CPU_IS_060)
+	{
+		/*
+		 * Get effective address and restore the stack.
+		 */
+
+		__asm__ __volatile__ ("move.l	8(%%sp),%0\n\t"
+				      "move.l	%1,%%sp\n\t"
+				      : "=a&" (eff_addr)
+				      : "r" (save_sp) );
+	}
+	else
+	{
+		register struct m68040_frame *frame;
+
+		__asm__ __volatile__ ("lea	8(%%sp),%0\n\t"
+				      : "=a&" (frame) );
+
+		if (tt_scsi_dma.dma_ctrl & 1)
+		{
+			/*
+			 * Bus error while writing.
+			 */
+
+			if (frame->wb3s & WBV_040)
+			{
+				if (frame->wb3a == (long) &hades_psdm_reg)
+					start_addr--;
+				else
+					writeback(frame->wb3s, frame->wb3a,
+						  frame->wb3d, &&scsi_bus_error);
+			}
+
+			if (frame->wb2s & WBV_040)
+			{
+				if (frame->wb2a == (long) &hades_psdm_reg)
+					start_addr--;
+				else
+					writeback(frame->wb2s, frame->wb2a,
+						  frame->wb2d, &&scsi_bus_error);
+			}
+
+			if (frame->wb1s & WBV_040)
+			{
+				if (frame->wb1a == (long) &hades_psdm_reg)
+					start_addr--;
+			}
+		}
+		else
+		{
+			/*
+			 * Bus error while reading.
+			 */
+
+			if (frame->wb3s & WBV_040)
+				writeback(frame->wb3s, frame->wb3a,
+					  frame->wb3d, &&scsi_bus_error);
+		}
+
+		eff_addr = (unsigned char *) frame->faddr;
+
+		__asm__ __volatile__ ("move.l	%0,%%sp\n\t"
+				      :
+				      : "r" (save_sp) );
+	}
+
+	dma_cnt = end_addr - start_addr;
+
+	if (eff_addr == &hades_psdm_reg)
+	{
+		/*
+		 * Bus error occurred while reading the pseudo
+		 * DMA register. Time out.
+		 */
+
+		tries--;
+
+		if (tries <= 0)
+		{
+			if ((tt_scsi_dma.dma_ctrl & 1) == 0)	/* Read or write? */
+				set_restdata_reg(start_addr);
+
+			if (dma_cnt <= 1)
+				printk(KERN_CRIT "DMA emulation: Fatal "
+				       "error while %s the last byte.\n",
+				       (tt_scsi_dma.dma_ctrl & 1)
+				       ? "writing" : "reading");
+
+			goto scsi_end;
+		}
+		else
+			goto scsi_loop;
+	}
+	else
+	{
+		/*
+		 * Bus error during pseudo DMA transfer.
+		 * Terminate the DMA transfer.
+		 */
+
+		hades_dma_ctrl |= 3;	/* Set EOP and bus error. */
+		if ((tt_scsi_dma.dma_ctrl & 1) == 0)	/* Read or write? */
+			set_restdata_reg(start_addr);
+		goto scsi_end;
+	}
+}