Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 493 insertions, 0 deletions

diff --git a/drivers/scsi/cpqfcTSi2c.c b/drivers/scsi/cpqfcTSi2c.c
new file mode 100644
index 00000000000..b38a6a9a55a
--- /dev/null
+++ b/drivers/scsi/cpqfcTSi2c.c
@@ -0,0 +1,493 @@
+/* Copyright(c) 2000, Compaq Computer Corporation 
+ * Fibre Channel Host Bus Adapter 
+ * 64-bit, 66MHz PCI 
+ * Originally developed and tested on:
+ * (front): [chip] Tachyon TS HPFC-5166A/1.2  L2C1090 ...
+ *          SP# P225CXCBFIEL6T, Rev XC
+ *          SP# 161290-001, Rev XD
+ * (back): Board No. 010008-001 A/W Rev X5, FAB REV X5
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ * Written by Don Zimmerman
+*/
+// These functions control the NVRAM I2C hardware on 
+// non-intelligent Fibre Host Adapters.
+// The primary purpose is to read the HBA's NVRAM to get adapter's 
+// manufactured WWN to copy into Tachyon chip registers
+// Orignal source author unknown
+
+#include <linux/types.h>
+enum boolean { FALSE, TRUE } ;
+
+
+#ifndef UCHAR
+typedef __u8 UCHAR;
+#endif
+#ifndef BOOLEAN
+typedef __u8 BOOLEAN;
+#endif
+#ifndef USHORT
+typedef __u16 USHORT;
+#endif
+#ifndef ULONG
+typedef __u32 ULONG;
+#endif
+
+
+#include <linux/string.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <asm/io.h>  // struct pt_regs for IRQ handler & Port I/O
+
+#include "cpqfcTSchip.h"
+
+static void tl_i2c_tx_byte( void* GPIOout, UCHAR data );
+/*static BOOLEAN tl_write_i2c_page_portion( void* GPIOin, void* GPIOout,
+  USHORT startOffset,  // e.g. 0x2f for WWN start
+  USHORT count,
+  UCHAR *buf );
+*/
+
+//
+// Tachlite GPIO2, GPIO3 (I2C) DEFINES
+// The NVRAM chip NM24C03 defines SCL (serial clock) and SDA (serial data)
+// GPIO2 drives SDA, and GPIO3 drives SCL
+// 
+// Since Tachlite inverts the state of the GPIO 0-3 outputs, SET writes 0
+// and clear writes 1. The input lines (read in TL status) is NOT inverted
+// This really helps confuse the code and debugging.
+
+#define SET_DATA_HI  0x0
+#define SET_DATA_LO  0x8
+#define SET_CLOCK_HI 0x0
+#define SET_CLOCK_LO 0x4
+
+#define SENSE_DATA_HI  0x8
+#define SENSE_DATA_LO  0x0
+#define SENSE_CLOCK_HI 0x4
+#define SENSE_CLOCK_LO 0x0
+
+#define SLAVE_READ_ADDRESS    0xA1
+#define SLAVE_WRITE_ADDRESS   0xA0
+					      
+
+static void i2c_delay(ULONG mstime);
+static void tl_i2c_clock_pulse( UCHAR , void* GPIOout);
+static UCHAR tl_read_i2c_data( void* );
+
+
+//-----------------------------------------------------------------------------
+//
+//      Name:   I2C_RX_ACK
+//
+//      This routine receives an acknowledge over the I2C bus.
+//
+//-----------------------------------------------------------------------------
+static unsigned short tl_i2c_rx_ack( void* GPIOin, void* GPIOout )
+{
+  unsigned long value;
+
+	// do clock pulse, let data line float high
+  tl_i2c_clock_pulse( SET_DATA_HI, GPIOout );
+
+	// slave must drive data low for acknowledge
+  value = tl_read_i2c_data( GPIOin);
+  if (value & SENSE_DATA_HI )
+    return( FALSE );
+
+  return( TRUE );
+}
+//-----------------------------------------------------------------------------
+//
+//      Name:   READ_I2C_REG
+//
+//      This routine reads the I2C control register using the global
+//      IO address stored in gpioreg.
+//
+//-----------------------------------------------------------------------------
+static UCHAR tl_read_i2c_data( void* gpioreg )
+{
+  return( (UCHAR)(readl( gpioreg ) & 0x08L) ); // GPIO3
+}
+//-----------------------------------------------------------------------------
+//
+//      Name:   WRITE_I2C_REG
+//
+//      This routine writes the I2C control register using the global
+//      IO address stored in gpioreg.
+//      In Tachlite, we don't want to modify other bits in TL Control reg.
+//
+//-----------------------------------------------------------------------------
+static void tl_write_i2c_reg( void* gpioregOUT, UCHAR value )
+{
+  ULONG  temp;
+
+	// First read the register and clear out the old bits
+  temp = readl( gpioregOUT ) & 0xfffffff3L;
+
+	// Now or in the new data and send it back out
+  writel( temp | value, gpioregOUT);
+}
+//-----------------------------------------------------------------------------
+//
+//      Name:   I2C_TX_START
+//
+//      This routine transmits a start condition over the I2C bus.
+//      1. Set SCL (clock, GPIO2) HIGH, set SDA (data, GPIO3) HIGH,
+//      wait 5us to stabilize.
+//      2. With SCL still HIGH, drive SDA low.  The low transition marks
+//         the start condition to NM24Cxx (the chip)
+//      NOTE! In TL control reg., output 1 means chip sees LOW
+//
+//-----------------------------------------------------------------------------
+static unsigned short tl_i2c_tx_start( void* GPIOin, void* GPIOout )
+{
+  unsigned short i;
+  ULONG value;
+
+  if ( !(tl_read_i2c_data(GPIOin) & SENSE_DATA_HI))
+  {
+    // start with clock high, let data float high
+    tl_write_i2c_reg(  GPIOout, SET_DATA_HI | SET_CLOCK_HI );
+
+    // keep sending clock pulses if slave is driving data line
+    for (i = 0; i < 10; i++)
+    {
+      tl_i2c_clock_pulse( SET_DATA_HI, GPIOout );
+
+      if ( tl_read_i2c_data(GPIOin) & SENSE_DATA_HI )
+	break;
+    }
+
+		// if he's still driving data low after 10 clocks, abort
+    value = tl_read_i2c_data( GPIOin ); // read status
+    if (!(value & 0x08) )
+      return( FALSE );
+  }
+
+
+	// To START, bring data low while clock high
+  tl_write_i2c_reg(  GPIOout, SET_CLOCK_HI | SET_DATA_LO );
+
+  i2c_delay(0);
+
+  return( TRUE );                           // TX start successful
+}
+//-----------------------------------------------------------------------------
+//
+//      Name:   I2C_TX_STOP
+//
+//      This routine transmits a stop condition over the I2C bus.
+//
+//-----------------------------------------------------------------------------
+
+static unsigned short tl_i2c_tx_stop( void* GPIOin, void* GPIOout )
+{
+  int i;
+
+  for (i = 0; i < 10; i++) 
+  {
+  // Send clock pulse, drive data line low
+    tl_i2c_clock_pulse( SET_DATA_LO, GPIOout );
+
+  // To STOP, bring data high while clock high
+    tl_write_i2c_reg(  GPIOout, SET_DATA_HI | SET_CLOCK_HI );
+
+  // Give the data line time to float high
+    i2c_delay(0);
+
+  // If slave is driving data line low, there's a problem; retry
+    if ( tl_read_i2c_data(GPIOin) & SENSE_DATA_HI )
+      return( TRUE );  // TX STOP successful!
+  }
+
+  return( FALSE );                      // error
+}
+//-----------------------------------------------------------------------------
+//
+//      Name:   I2C_TX_uchar
+//
+//      This routine transmits a byte across the I2C bus.
+//
+//-----------------------------------------------------------------------------
+static void tl_i2c_tx_byte( void* GPIOout, UCHAR data )
+{
+  UCHAR bit;
+
+  for (bit = 0x80; bit; bit >>= 1)
+  {
+    if( data & bit )
+      tl_i2c_clock_pulse( (UCHAR)SET_DATA_HI, GPIOout);
+    else
+      tl_i2c_clock_pulse( (UCHAR)SET_DATA_LO, GPIOout);
+  }  
+}
+//-----------------------------------------------------------------------------
+//
+//      Name:   I2C_RX_uchar
+//
+//      This routine receives a byte across the I2C bus.
+//
+//-----------------------------------------------------------------------------
+static UCHAR tl_i2c_rx_byte( void* GPIOin, void* GPIOout )
+{
+  UCHAR bit;
+  UCHAR data = 0;
+
+
+  for (bit = 0x80; bit; bit >>= 1) {
+    // do clock pulse, let data line float high
+    tl_i2c_clock_pulse( SET_DATA_HI, GPIOout );
+
+    // read data line
+    if ( tl_read_i2c_data( GPIOin) & 0x08 )
+      data |= bit;
+  }
+
+  return (data);
+}
+//*****************************************************************************
+//*****************************************************************************
+// Function:   read_i2c_nvram
+// Arguments:  UCHAR count     number of bytes to read
+//             UCHAR *buf      area to store the bytes read
+// Returns:    0 - failed
+//             1 - success
+//*****************************************************************************
+//*****************************************************************************
+unsigned long cpqfcTS_ReadNVRAM( void* GPIOin, void* GPIOout , USHORT count,
+	UCHAR *buf )
+{
+  unsigned short i;
+
+  if( !( tl_i2c_tx_start(GPIOin, GPIOout) ))
+    return FALSE;
+
+  // Select the NVRAM for "dummy" write, to set the address
+  tl_i2c_tx_byte( GPIOout , SLAVE_WRITE_ADDRESS );
+  if ( !tl_i2c_rx_ack(GPIOin, GPIOout ) )
+    return( FALSE );
+
+  // Now send the address where we want to start reading  
+  tl_i2c_tx_byte( GPIOout , 0 );
+  if ( !tl_i2c_rx_ack(GPIOin, GPIOout ) )
+    return( FALSE );
+
+  // Send a repeated start condition and select the
+  //  slave for reading now.
+  if( tl_i2c_tx_start(GPIOin, GPIOout) )
+    tl_i2c_tx_byte( GPIOout, SLAVE_READ_ADDRESS );
+
+  if ( !tl_i2c_rx_ack(GPIOin, GPIOout) )
+    return( FALSE );
+
+  // this loop will now read out the data and store it
+  //  in the buffer pointed to by buf
+  for ( i=0; i<count; i++) 
+  {
+    *buf++ = tl_i2c_rx_byte(GPIOin, GPIOout);
+
+    // Send ACK by holding data line low for 1 clock
+    if ( i < (count-1) )
+      tl_i2c_clock_pulse( 0x08, GPIOout );
+    else {
+	// Don't send ack for final byte
+      tl_i2c_clock_pulse( SET_DATA_HI, GPIOout );
+    }
+  }
+
+  tl_i2c_tx_stop(GPIOin, GPIOout);
+
+  return( TRUE );
+}
+
+//****************************************************************
+//
+//
+//
+// routines to set and clear the data and clock bits
+//
+//
+//
+//****************************************************************
+
+static void tl_set_clock(void* gpioreg)
+{
+  ULONG ret_val;
+
+  ret_val = readl( gpioreg );
+  ret_val &= 0xffffffFBL;  // clear GPIO2 (SCL)
+  writel( ret_val, gpioreg);
+}
+
+static void tl_clr_clock(void* gpioreg)
+{
+  ULONG ret_val;
+
+  ret_val = readl( gpioreg );
+  ret_val |= SET_CLOCK_LO;
+  writel( ret_val, gpioreg);
+}
+
+//*****************************************************************
+//
+//
+// This routine will advance the clock by one period
+//
+//
+//*****************************************************************
+static void tl_i2c_clock_pulse( UCHAR value, void* GPIOout  )
+{
+  ULONG ret_val;
+
+  // clear the clock bit
+  tl_clr_clock( GPIOout );
+
+  i2c_delay(0);
+
+
+  // read the port to preserve non-I2C bits
+  ret_val = readl( GPIOout );
+
+  // clear the data & clock bits
+  ret_val &= 0xFFFFFFf3;
+
+  // write the value passed in...
+  // data can only change while clock is LOW!
+  ret_val |= value;           // the data
+  ret_val |= SET_CLOCK_LO;    // the clock
+  writel( ret_val, GPIOout );
+
+  i2c_delay(0);
+
+
+  //set clock bit
+  tl_set_clock( GPIOout);
+}
+
+
+
+
+//*****************************************************************
+//
+//
+// This routine returns the 64-bit WWN
+//
+//
+//*****************************************************************
+int cpqfcTS_GetNVRAM_data( UCHAR *wwnbuf, UCHAR *buf )
+{
+  ULONG len;
+  ULONG sub_len;
+  ULONG ptr_inc;
+  ULONG i;
+  ULONG j;
+  UCHAR *data_ptr;
+  UCHAR  z;
+  UCHAR  name;
+  UCHAR  sub_name;
+  UCHAR  done;
+  int iReturn=0;  // def. 0 offset is failure to find WWN field
+  
+
+	  
+  data_ptr = (UCHAR *)buf;
+
+  done = FALSE;
+  i = 0;
+
+  while ( (i < 128) && (!done) ) 
+  {
+    z = data_ptr[i];\
+    if ( !(z & 0x80) )  
+    {	
+      len  = 1 + (z & 0x07);
+
+      name = (z & 0x78) >> 3;
+      if (name == 0x0F)
+        done = TRUE;
+    }
+    else 
+    {
+      name = z & 0x7F;
+      len  = 3 + data_ptr[i+1] + (data_ptr[i+2] << 8);
+           
+      switch (name) 
+      {
+      case 0x0D:
+	//
+	  j = i + 3;
+	  //
+	  if ( data_ptr[j] == 0x3b ) {
+	    len = 6;
+	    break;
+	  }
+
+	  while ( j<(i+len) ) {
+	    sub_name = (data_ptr[j] & 0x3f);
+	    sub_len  = data_ptr[j+1] + 
+	               (data_ptr[j+2] << 8);
+            ptr_inc  = sub_len + 3; 
+	    switch (sub_name) 
+	    {
+	    case 0x3C:
+              memcpy( wwnbuf, &data_ptr[j+3], 8);
+              iReturn = j+3;
+              break;
+            default:
+              break;
+	    }
+	    j += ptr_inc;
+          }
+	  break;
+        default:
+	  break;
+      }  
+    }  
+  //
+    i += len;
+  }  // end while 
+  return iReturn;
+}
+
+
+
+
+
+// define a short 5 micro sec delay, and longer (ms) delay
+
+static void i2c_delay(ULONG mstime)
+{
+  ULONG i;
+  
+// NOTE: we only expect to use these delays when reading
+// our adapter's NVRAM, which happens only during adapter reset.
+// Delay technique from "Linux Device Drivers", A. Rubini 
+// (1st Ed.) pg 137.
+
+//  printk(" delay %lx  ", mstime);
+  if( mstime ) // ms delay?
+  {
+    // delay technique
+    for( i=0; i < mstime; i++)
+      udelay(1000); // 1ms per loop
+	
+  }
+  else  // 5 micro sec delay
+  
+    udelay( 5 ); // micro secs
+  
+//  printk("done\n");
+}
+
+
+