diff options
| author | James Bottomley <jejb@mulgrave.(none)> | 2005-10-29 10:01:24 -0500 |
|---|---|---|
| committer | James Bottomley <jejb@mulgrave.(none)> | 2005-10-29 10:01:24 -0500 |
| commit | ca61f10ab2b874b889e89d14ea09fae2dcccdca6 (patch) | |
| tree | d4e7316a7d30dceb1d0eda442426431d9e2274d0 /drivers/scsi/cpqfcTSworker.c | |
| parent | 80e23babfcf21a2dc726d3be00e06993f02f0274 (diff) | |
[SCSI] remove broken driver cpqfc
Hopefully there should be a brand new replacement driver for this heap
of junk by the beginning of next year.
Acked By: Martin K. Petersen <mkp@mkp.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Diffstat (limited to 'drivers/scsi/cpqfcTSworker.c')
| -rw-r--r-- | drivers/scsi/cpqfcTSworker.c | 6516 |
1 files changed, 0 insertions, 6516 deletions
diff --git a/drivers/scsi/cpqfcTSworker.c b/drivers/scsi/cpqfcTSworker.c deleted file mode 100644 index d822ddcc52b..00000000000 --- a/drivers/scsi/cpqfcTSworker.c +++ /dev/null @@ -1,6516 +0,0 @@ -/* Copyright(c) 2000, Compaq Computer Corporation - * Fibre Channel Host Bus Adapter - * 64-bit, 66MHz PCI - * Originally developed and tested on: - * (front): [chip] Tachyon TS HPFC-5166A/1.2 L2C1090 ... - * SP# P225CXCBFIEL6T, Rev XC - * SP# 161290-001, Rev XD - * (back): Board No. 010008-001 A/W Rev X5, FAB REV X5 - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * Written by Don Zimmerman -*/ - -#include <linux/sched.h> -#include <linux/timer.h> -#include <linux/string.h> -#include <linux/slab.h> -#include <linux/ioport.h> -#include <linux/kernel.h> -#include <linux/stat.h> -#include <linux/blkdev.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/smp_lock.h> -#include <linux/pci.h> - -#define SHUTDOWN_SIGS (sigmask(SIGKILL)|sigmask(SIGINT)|sigmask(SIGTERM)) - -#include <asm/system.h> -#include <asm/irq.h> -#include <asm/dma.h> - -#include "scsi.h" -#include <scsi/scsi_host.h> // struct Scsi_Host definition for T handler -#include "cpqfcTSchip.h" -#include "cpqfcTSstructs.h" -#include "cpqfcTStrigger.h" - -//#define LOGIN_DBG 1 - -// REMARKS: -// Since Tachyon chips may be permitted to wait from 500ms up to 2 sec -// to empty an outgoing frame from its FIFO to the Fibre Channel stream, -// we cannot do everything we need to in the interrupt handler. Specifically, -// every time a link re-init (e.g. LIP) takes place, all SCSI I/O has to be -// suspended until the login sequences have been completed. Login commands -// are frames just like SCSI commands are frames; they are subject to the same -// timeout issues and delays. Also, various specs provide up to 2 seconds for -// devices to log back in (i.e. respond with ACC to a login frame), so I/O to -// that device has to be suspended. -// A serious problem here occurs on highly loaded FC-AL systems. If our FC port -// has a low priority (e.g. high arbitrated loop physical address, alpa), and -// some other device is hogging bandwidth (permissible under FC-AL), we might -// time out thinking the link is hung, when it's simply busy. Many such -// considerations complicate the design. Although Tachyon assumes control -// (in silicon) for many link-specific issues, the Linux driver is left with the -// rest, which turns out to be a difficult, time critical chore. - -// These "worker" functions will handle things like FC Logins; all -// processes with I/O to our device must wait for the Login to complete -// and (if successful) I/O to resume. In the event of a malfunctioning or -// very busy loop, it may take hundreds of millisecs or even seconds to complete -// a frame send. We don't want to hang up the entire server (and all -// processes which don't depend on Fibre) during this wait. - -// The Tachyon chip can have around 30,000 I/O operations ("exchanges") -// open at one time. However, each exchange must be initiated -// synchronously (i.e. each of the 30k I/O had to be started one at a -// time by sending a starting frame via Tachyon's outbound que). - -// To accommodate kernel "module" build, this driver limits the exchanges -// to 256, because of the contiguous physical memory limitation of 128M. - -// Typical FC Exchanges are opened presuming the FC frames start without errors, -// while Exchange completion is handled in the interrupt handler. This -// optimizes performance for the "everything's working" case. -// However, when we have FC related errors or hot plugging of FC ports, we pause -// I/O and handle FC-specific tasks in the worker thread. These FC-specific -// functions will handle things like FC Logins and Aborts. As the Login sequence -// completes to each and every target, I/O can resume to that target. - -// Our kernel "worker thread" must share the HBA with threads calling -// "queuecommand". We define a "BoardLock" semaphore which indicates -// to "queuecommand" that the HBA is unavailable, and Cmnds are added to a -// board lock Q. When the worker thread finishes with the board, the board -// lock Q commands are completed with status causing immediate retry. -// Typically, the board is locked while Logins are in progress after an -// FC Link Down condition. When Cmnds are re-queued after board lock, the -// particular Scsi channel/target may or may not have logged back in. When -// the device is waiting for login, the "prli" flag is clear, in which case -// commands are passed to a Link Down Q. Whenever the login finally completes, -// the LinkDown Q is completed, again with status causing immediate retry. -// When FC devices are logged in, we build and start FC commands to the -// devices. - -// NOTE!! As of May 2000, kernel 2.2.14, the error recovery logic for devices -// that never log back in (e.g. physically removed) is NOT completely -// understood. I've still seen instances of system hangs on failed Write -// commands (possibly from the ext2 layer?) on device removal. Such special -// cases need to be evaluated from a system/application view - e.g., how -// exactly does the system want me to complete commands when the device is -// physically removed?? - -// local functions - -static void SetLoginFields( - PFC_LOGGEDIN_PORT pLoggedInPort, - TachFCHDR_GCMND* fchs, - BOOLEAN PDisc, - BOOLEAN Originator); - -static void AnalyzeIncomingFrame( - CPQFCHBA *cpqfcHBAdata, - ULONG QNdx ); - -static void SendLogins( CPQFCHBA *cpqfcHBAdata, __u32 *FabricPortIds ); - -static int verify_PLOGI( PTACHYON fcChip, - TachFCHDR_GCMND* fchs, ULONG* reject_explain); -static int verify_PRLI( TachFCHDR_GCMND* fchs, ULONG* reject_explain); - -static void LoadWWN( PTACHYON fcChip, UCHAR* dest, UCHAR type); -static void BuildLinkServicePayload( - PTACHYON fcChip, ULONG type, void* payload); - -static void UnblockScsiDevice( struct Scsi_Host *HostAdapter, - PFC_LOGGEDIN_PORT pLoggedInPort); - -static void cpqfcTSCheckandSnoopFCP( PTACHYON fcChip, ULONG x_ID); - -static void CompleteBoardLockCmnd( CPQFCHBA *cpqfcHBAdata); - -static void RevalidateSEST( struct Scsi_Host *HostAdapter, - PFC_LOGGEDIN_PORT pLoggedInPort); - -static void IssueReportLunsCommand( - CPQFCHBA* cpqfcHBAdata, - TachFCHDR_GCMND* fchs); - -// (see scsi_error.c comments on kernel task creation) - -void cpqfcTSWorkerThread( void *host) -{ - struct Scsi_Host *HostAdapter = (struct Scsi_Host*)host; - CPQFCHBA *cpqfcHBAdata = (CPQFCHBA *)HostAdapter->hostdata; -#ifdef PCI_KERNEL_TRACE - PTACHYON fcChip = &cpqfcHBAdata->fcChip; -#endif - DECLARE_MUTEX_LOCKED(fcQueReady); - DECLARE_MUTEX_LOCKED(fcTYOBcomplete); - DECLARE_MUTEX_LOCKED(TachFrozen); - DECLARE_MUTEX_LOCKED(BoardLock); - - ENTER("WorkerThread"); - - lock_kernel(); - daemonize("cpqfcTS_wt_%d", HostAdapter->host_no); - siginitsetinv(¤t->blocked, SHUTDOWN_SIGS); - - - cpqfcHBAdata->fcQueReady = &fcQueReady; // primary wait point - cpqfcHBAdata->TYOBcomplete = &fcTYOBcomplete; - cpqfcHBAdata->TachFrozen = &TachFrozen; - - - cpqfcHBAdata->worker_thread = current; - - unlock_kernel(); - - if( cpqfcHBAdata->notify_wt != NULL ) - up( cpqfcHBAdata->notify_wt); // OK to continue - - while(1) - { - unsigned long flags; - - down_interruptible( &fcQueReady); // wait for something to do - - if (signal_pending(current) ) - break; - - PCI_TRACE( 0x90) - // first, take the IO lock so the SCSI upper layers can't call - // into our _quecommand function (this also disables INTs) - spin_lock_irqsave( HostAdapter->host_lock, flags); // STOP _que function - PCI_TRACE( 0x90) - - CPQ_SPINLOCK_HBA( cpqfcHBAdata) - // next, set this pointer to indicate to the _quecommand function - // that the board is in use, so it should que the command and - // immediately return (we don't actually require the semaphore function - // in this driver rev) - - cpqfcHBAdata->BoardLock = &BoardLock; - - PCI_TRACE( 0x90) - - // release the IO lock (and re-enable interrupts) - spin_unlock_irqrestore( HostAdapter->host_lock, flags); - - // disable OUR HBA interrupt (keep them off as much as possible - // during error recovery) - disable_irq( cpqfcHBAdata->HostAdapter->irq); - - // OK, let's process the Fibre Channel Link Q and do the work - cpqfcTS_WorkTask( HostAdapter); - - // hopefully, no more "work" to do; - // re-enable our INTs for "normal" completion processing - enable_irq( cpqfcHBAdata->HostAdapter->irq); - - - cpqfcHBAdata->BoardLock = NULL; // allow commands to be queued - CPQ_SPINUNLOCK_HBA( cpqfcHBAdata) - - - // Now, complete any Cmnd we Q'd up while BoardLock was held - - CompleteBoardLockCmnd( cpqfcHBAdata); - - - } - // hopefully, the signal was for our module exit... - if( cpqfcHBAdata->notify_wt != NULL ) - up( cpqfcHBAdata->notify_wt); // yep, we're outta here -} - - -// Freeze Tachyon routine. -// If Tachyon is already frozen, return FALSE -// If Tachyon is not frozen, call freeze function, return TRUE -// -static BOOLEAN FreezeTach( CPQFCHBA *cpqfcHBAdata) -{ - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - BOOLEAN FrozeTach = FALSE; - // It's possible that the chip is already frozen; if so, - // "Freezing" again will NOT! generate another Freeze - // Completion Message. - - if( (fcChip->Registers.TYstatus.value & 0x70000) != 0x70000) - { // (need to freeze...) - fcChip->FreezeTachyon( fcChip, 2); // both ERQ and FCP assists - - // 2. Get Tach freeze confirmation - // (synchronize SEST manipulation with Freeze Completion Message) - // we need INTs on so semaphore can be set. - enable_irq( cpqfcHBAdata->HostAdapter->irq); // only way to get Semaphore - down_interruptible( cpqfcHBAdata->TachFrozen); // wait for INT handler sem. - // can we TIMEOUT semaphore wait?? TBD - disable_irq( cpqfcHBAdata->HostAdapter->irq); - - FrozeTach = TRUE; - } // (else, already frozen) - - return FrozeTach; -} - - - - -// This is the kernel worker thread task, which processes FC -// tasks which were queued by the Interrupt handler or by -// other WorkTask functions. - -#define DBG 1 -//#undef DBG -void cpqfcTS_WorkTask( struct Scsi_Host *HostAdapter) -{ - CPQFCHBA *cpqfcHBAdata = (CPQFCHBA *)HostAdapter->hostdata; - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - FC_EXCHANGES *Exchanges = fcChip->Exchanges; - ULONG QconsumerNdx; - LONG ExchangeID; - ULONG ulStatus=0; - TachFCHDR_GCMND fchs; - PFC_LINK_QUE fcLQ = cpqfcHBAdata->fcLQ; - - ENTER("WorkTask"); - - // copy current index to work on - QconsumerNdx = fcLQ->consumer; - - PCI_TRACEO( fcLQ->Qitem[QconsumerNdx].Type, 0x90) - - - // NOTE: when this switch completes, we will "consume" the Que item -// printk("Que type %Xh\n", fcLQ->Qitem[QconsumerNdx].Type); - switch( fcLQ->Qitem[QconsumerNdx].Type ) - { - // incoming frame - link service (ACC, UNSOL REQ, etc.) - // or FCP-SCSI command - case SFQ_UNKNOWN: - AnalyzeIncomingFrame( cpqfcHBAdata, QconsumerNdx ); - - break; - - - - case EXCHANGE_QUEUED: // an Exchange (i.e. FCP-SCSI) was previously - // Queued because the link was down. The - // heartbeat timer detected it and Queued it here. - // We attempt to start it again, and if - // successful we clear the EXCHANGE_Q flag. - // If the link doesn't come up, the Exchange - // will eventually time-out. - - ExchangeID = (LONG) // x_ID copied from DPC timeout function - fcLQ->Qitem[QconsumerNdx].ulBuff[0]; - - // It's possible that a Q'd exchange could have already - // been started by other logic (e.g. ABTS process) - // Don't start if already started (Q'd flag clear) - - if( Exchanges->fcExchange[ExchangeID].status & EXCHANGE_QUEUED ) - { -// printk(" *Start Q'd x_ID %Xh: type %Xh ", -// ExchangeID, Exchanges->fcExchange[ExchangeID].type); - - ulStatus = cpqfcTSStartExchange( cpqfcHBAdata, ExchangeID); - if( !ulStatus ) - { -// printk("success* "); - } - else - { -#ifdef DBG - - if( ulStatus == EXCHANGE_QUEUED) - printk("Queued* "); - else - printk("failed* "); - -#endif - } - } - break; - - - case LINKDOWN: - // (lots of things already done in INT handler) future here? - break; - - - case LINKACTIVE: // Tachyon set the Lup bit in FM status - // NOTE: some misbehaving FC ports (like Tach2.1) - // can re-LIP immediately after a LIP completes. - - // if "initiator", need to verify LOGs with ports -// printk("\n*LNKUP* "); - - if( fcChip->Options.initiator ) - SendLogins( cpqfcHBAdata, NULL ); // PLOGI or PDISC, based on fcPort data - // if SendLogins successfully completes, PortDiscDone - // will be set. - - - // If SendLogins was successful, then we expect to get incoming - // ACCepts or REJECTs, which are handled below. - - break; - - // LinkService and Fabric request/reply processing - case ELS_FDISC: // need to send Fabric Discovery (Login) - case ELS_FLOGI: // need to send Fabric Login - case ELS_SCR: // need to send State Change Registration - case FCS_NSR: // need to send Name Service Request - case ELS_PLOGI: // need to send PLOGI - case ELS_ACC: // send generic ACCept - case ELS_PLOGI_ACC: // need to send ELS ACCept frame to recv'd PLOGI - case ELS_PRLI_ACC: // need to send ELS ACCept frame to recv'd PRLI - case ELS_LOGO: // need to send ELS LOGO (logout) - case ELS_LOGO_ACC: // need to send ELS ACCept frame to recv'd PLOGI - case ELS_RJT: // ReJecT reply - case ELS_PRLI: // need to send ELS PRLI - - -// printk(" *ELS %Xh* ", fcLQ->Qitem[QconsumerNdx].Type); - // if PortDiscDone is not set, it means the SendLogins routine - // failed to complete -- assume that LDn occurred, so login frames - // are invalid - if( !cpqfcHBAdata->PortDiscDone) // cleared by LDn - { - printk("Discard Q'd ELS login frame\n"); - break; - } - - ulStatus = cpqfcTSBuildExchange( - cpqfcHBAdata, - fcLQ->Qitem[QconsumerNdx].Type, // e.g. PLOGI - (TachFCHDR_GCMND*) - fcLQ->Qitem[QconsumerNdx].ulBuff, // incoming fchs - NULL, // no data (no scatter/gather list) - &ExchangeID );// fcController->fcExchanges index, -1 if failed - - if( !ulStatus ) // Exchange setup? - { - ulStatus = cpqfcTSStartExchange( cpqfcHBAdata, ExchangeID ); - if( !ulStatus ) - { - // submitted to Tach's Outbound Que (ERQ PI incremented) - // waited for completion for ELS type (Login frames issued - // synchronously) - } - else - // check reason for Exchange not being started - we might - // want to Queue and start later, or fail with error - { - - } - } - - else // Xchange setup failed... - printk(" cpqfcTSBuildExchange failed: %Xh\n", ulStatus ); - - break; - - case SCSI_REPORT_LUNS: - // pass the incoming frame (actually, it's a PRLI frame) - // so we can send REPORT_LUNS, in order to determine VSA/PDU - // FCP-SCSI Lun address mode - IssueReportLunsCommand( cpqfcHBAdata, (TachFCHDR_GCMND*) - fcLQ->Qitem[QconsumerNdx].ulBuff); - - break; - - - - - case BLS_ABTS: // need to ABORT one or more exchanges - { - LONG x_ID = fcLQ->Qitem[QconsumerNdx].ulBuff[0]; - BOOLEAN FrozeTach = FALSE; - - if ( x_ID >= TACH_SEST_LEN ) // (in)sanity check - { -// printk( " cpqfcTS ERROR! BOGUS x_ID %Xh", x_ID); - break; - } - - - if( Exchanges->fcExchange[ x_ID].Cmnd == NULL ) // should be RARE - { -// printk(" ABTS %Xh Scsi Cmnd null! ", x_ID); - - break; // nothing to abort! - } - -//#define ABTS_DBG -#ifdef ABTS_DBG - printk("INV SEST[%X] ", x_ID); - if( Exchanges->fcExchange[x_ID].status & FC2_TIMEOUT) - { - printk("FC2TO"); - } - if( Exchanges->fcExchange[x_ID].status & INITIATOR_ABORT) - { - printk("IA"); - } - if( Exchanges->fcExchange[x_ID].status & PORTID_CHANGED) - { - printk("PORTID"); - } - if( Exchanges->fcExchange[x_ID].status & DEVICE_REMOVED) - { - printk("DEVRM"); - } - if( Exchanges->fcExchange[x_ID].status & LINKFAIL_TX) - { - printk("LKF"); - } - if( Exchanges->fcExchange[x_ID].status & FRAME_TO) - { - printk("FRMTO"); - } - if( Exchanges->fcExchange[x_ID].status & ABORTSEQ_NOTIFY) - { - printk("ABSQ"); - } - if( Exchanges->fcExchange[x_ID].status & SFQ_FRAME) - { - printk("SFQFR"); - } - - if( Exchanges->fcExchange[ x_ID].type == 0x2000) - printk(" WR"); - else if( Exchanges->fcExchange[ x_ID].type == 0x3000) - printk(" RD"); - else if( Exchanges->fcExchange[ x_ID].type == 0x10) - printk(" ABTS"); - else - printk(" %Xh", Exchanges->fcExchange[ x_ID].type); - - if( !(Exchanges->fcExchange[x_ID].status & INITIATOR_ABORT)) - { - printk(" Cmd %p, ", - Exchanges->fcExchange[ x_ID].Cmnd); - - printk(" brd/chn/trg/lun %d/%d/%d/%d port_id %06X\n", - cpqfcHBAdata->HBAnum, - Exchanges->fcExchange[ x_ID].Cmnd->channel, - Exchanges->fcExchange[ x_ID].Cmnd->target, - Exchanges->fcExchange[ x_ID].Cmnd->lun, - Exchanges->fcExchange[ x_ID].fchs.d_id & 0xFFFFFF); - } - else // assume that Cmnd ptr is invalid on _abort() - { - printk(" Cmd ptr invalid\n"); - } - -#endif - - - // Steps to ABORT a SEST exchange: - // 1. Freeze TL SCSI assists & ERQ (everything) - // 2. Receive FROZEN inbound CM (must succeed!) - // 3. Invalidate x_ID SEST entry - // 4. Resume TL SCSI assists & ERQ (everything) - // 5. Build/start on exchange - change "type" to BLS_ABTS, - // timeout to X sec (RA_TOV from PLDA is actually 0) - // 6. Set Exchange Q'd status if ABTS cannot be started, - // or simply complete Exchange in "Terminate" condition - - PCI_TRACEO( x_ID, 0xB4) - - // 1 & 2 . Freeze Tach & get confirmation of freeze - FrozeTach = FreezeTach( cpqfcHBAdata); - - // 3. OK, Tachyon is frozen, so we can invalidate SEST exchange. - // FC2_TIMEOUT means we are originating the abort, while - // TARGET_ABORT means we are ACCepting an abort. - // LINKFAIL_TX, ABORTSEQ_NOFITY, INV_ENTRY or FRAME_TO are - // all from Tachyon: - // Exchange was corrupted by LDn or other FC physical failure - // INITIATOR_ABORT means the upper layer driver/application - // requested the abort. - - - - // clear bit 31 (VALid), to invalidate & take control from TL - fcChip->SEST->u[ x_ID].IWE.Hdr_Len &= 0x7FFFFFFF; - - - // examine and Tach's "Linked List" for IWEs that - // received (nearly) simultaneous transfer ready (XRDY) - // repair linked list if necessary (TBD!) - // (If we ignore the "Linked List", we will time out - // WRITE commands where we received the FCP-SCSI XFRDY - // frame (because Tachyon didn't processes it). Linked List - // management should be done as an optimization. - -// readl( fcChip->Registers.ReMapMemBase+TL_MEM_SEST_LINKED_LIST )); - - - - - // 4. Resume all Tachlite functions (for other open Exchanges) - // as quickly as possible to allow other exchanges to other ports - // to resume. Freezing Tachyon may cause cascading errors, because - // any received SEST frame cannot be processed by the SEST. - // Don't "unfreeze" unless Link is operational - if( FrozeTach ) // did we just freeze it (above)? - fcChip->UnFreezeTachyon( fcChip, 2); // both ERQ and FCP assists - - - PCI_TRACEO( x_ID, 0xB4) - - // Note there is no confirmation that the chip is "unfrozen". Also, - // if the Link is down when unfreeze is called, it has no effect. - // Chip will unfreeze when the Link is back up. - - // 5. Now send out Abort commands if possible - // Some Aborts can't be "sent" (Port_id changed or gone); - // if the device is gone, there is no port_id to send the ABTS to. - - if( !(Exchanges->fcExchange[ x_ID].status & PORTID_CHANGED) - && - !(Exchanges->fcExchange[ x_ID].status & DEVICE_REMOVED) ) - { - Exchanges->fcExchange[ x_ID].type = BLS_ABTS; - fchs.s_id = Exchanges->fcExchange[ x_ID].fchs.d_id; - ulStatus = cpqfcTSBuildExchange( - cpqfcHBAdata, - BLS_ABTS, - &fchs, // (uses only s_id) - NULL, // (no scatter/gather list for ABTS) - &x_ID );// ABTS on this Exchange ID - - if( !ulStatus ) // Exchange setup build OK? - { - - // ABTS may be needed because an Exchange was corrupted - // by a Link disruption. If the Link is UP, we can - // presume that this ABTS can start immediately; otherwise, - // set Que'd status so the Login functions - // can restart it when the FC physical Link is restored - if( ((fcChip->Registers.FMstatus.value &0xF0) &0x80)) // loop init? - { -// printk(" *set Q status x_ID %Xh on LDn* ", x_ID); - Exchanges->fcExchange[ x_ID].status |= EXCHANGE_QUEUED; - } - - else // what FC device (port_id) does the Cmd belong to? - { - PFC_LOGGEDIN_PORT pLoggedInPort = - Exchanges->fcExchange[ x_ID].pLoggedInPort; - - // if Port is logged in, we might start the abort. - - if( (pLoggedInPort != NULL) - && - (pLoggedInPort->prli == TRUE) ) - { - // it's possible that an Exchange has already been Queued - // to start after Login completes. Check and don't - // start it (again) here if Q'd status set -// printk(" ABTS xchg %Xh ", x_ID); - if( Exchanges->fcExchange[x_ID].status & EXCHANGE_QUEUED) - { -// printk("already Q'd "); - } - else - { -// printk("starting "); - - fcChip->fcStats.FC2aborted++; - ulStatus = cpqfcTSStartExchange( cpqfcHBAdata, x_ID ); - if( !ulStatus ) - { - // OK - // submitted to Tach's Outbound Que (ERQ PI incremented) - } - else - { -/* printk("ABTS exchange start failed -status %Xh, x_ID %Xh ", - ulStatus, x_ID); -*/ - } - } - } - else - { -/* printk(" ABTS NOT starting xchg %Xh, %p ", - x_ID, pLoggedInPort); - if( pLoggedInPort ) - printk("prli %d ", pLoggedInPort->prli); -*/ - } - } - } - else // what the #@! - { // how do we fail to build an Exchange for ABTS?? - printk("ABTS exchange build failed -status %Xh, x_ID %Xh\n", - ulStatus, x_ID); - } - } - else // abort without ABTS -- just complete exchange/Cmnd to Linux - { -// printk(" *Terminating x_ID %Xh on %Xh* ", -// x_ID, Exchanges->fcExchange[x_ID].status); - cpqfcTSCompleteExchange( cpqfcHBAdata->PciDev, fcChip, x_ID); - - } - } // end of ABTS case - break; - - - - case BLS_ABTS_ACC: // need to ACCept one ABTS - // (NOTE! this code not updated for Linux yet..) - - - printk(" *ABTS_ACC* "); - // 1. Freeze TL - - fcChip->FreezeTachyon( fcChip, 2); // both ERQ and FCP assists - - memcpy( // copy the incoming ABTS frame - &fchs, - fcLQ->Qitem[QconsumerNdx].ulBuff, // incoming fchs - sizeof( fchs)); - - // 3. OK, Tachyon is frozen so we can invalidate SEST entry - // (if necessary) - // Status FC2_TIMEOUT means we are originating the abort, while - // TARGET_ABORT means we are ACCepting an abort - - ExchangeID = fchs.ox_rx_id & 0x7FFF; // RX_ID for exchange -// printk("ABTS ACC for Target ExchangeID %Xh\n", ExchangeID); - - - // sanity check on received ExchangeID - if( Exchanges->fcExchange[ ExchangeID].status == TARGET_ABORT ) - { - // clear bit 31 (VALid), to invalidate & take control from TL -// printk("Invalidating SEST exchange %Xh\n", ExchangeID); - fcChip->SEST->u[ ExchangeID].IWE.Hdr_Len &= 0x7FFFFFFF; - } - - - // 4. Resume all Tachlite functions (for other open Exchanges) - // as quickly as possible to allow other exchanges to other ports - // to resume. Freezing Tachyon for too long may royally screw - // up everything! - fcChip->UnFreezeTachyon( fcChip, 2); // both ERQ and FCP assists - - // Note there is no confirmation that the chip is "unfrozen". Also, - // if the Link is down when unfreeze is called, it has no effect. - // Chip will unfreeze when the Link is back up. - - // 5. Now send out Abort ACC reply for this exchange - Exchanges->fcExchange[ ExchangeID].type = BLS_ABTS_ACC; - - fchs.s_id = Exchanges->fcExchange[ ExchangeID].fchs.d_id; - ulStatus = cpqfcTSBuildExchange( - cpqfcHBAdata, - BLS_ABTS_ACC, - &fchs, - NULL, // no data (no scatter/gather list) - &ExchangeID );// fcController->fcExchanges index, -1 if failed - - if( !ulStatus ) // Exchange setup? - { - ulStatus = cpqfcTSStartExchange( cpqfcHBAdata, ExchangeID ); - if( !ulStatus ) - { - // submitted to Tach's Outbound Que (ERQ PI incremented) - // waited for completion for ELS type (Login frames issued - // synchronously) - } - else - // check reason for Exchange not being started - we might - // want to Queue and start later, or fail with error - { - - } - } - break; - - - case BLS_ABTS_RJT: // need to ReJecT one ABTS; reject implies the - // exchange doesn't exist in the TARGET context. - // ExchangeID has to come from LinkService space. - - printk(" *ABTS_RJT* "); - ulStatus = cpqfcTSBuildExchange( - cpqfcHBAdata, - BLS_ABTS_RJT, - (TachFCHDR_GCMND*) - fcLQ->Qitem[QconsumerNdx].ulBuff, // incoming fchs - NULL, // no data (no scatter/gather list) - &ExchangeID );// fcController->fcExchanges index, -1 if failed - - if( !ulStatus ) // Exchange setup OK? - { - ulStatus = cpqfcTSStartExchange( cpqfcHBAdata, ExchangeID ); - // If it fails, we aren't required to retry. - } - if( ulStatus ) - { - printk("Failed to send BLS_RJT for ABTS, X_ID %Xh\n", ExchangeID); - } - else - { - printk("Sent BLS_RJT for ABTS, X_ID %Xh\n", ExchangeID); - - } - - break; - - - - default: - break; - } // end switch -//doNothing: - // done with this item - now set the NEXT index - - if( QconsumerNdx+1 >= FC_LINKQ_DEPTH ) // rollover test - { - fcLQ->consumer = 0; - } - else - { - fcLQ->consumer++; - } - - PCI_TRACEO( fcLQ->Qitem[QconsumerNdx].Type, 0x94) - - LEAVE("WorkTask"); - return; -} - - - - -// When Tachyon reports link down, bad al_pa, or Link Service (e.g. Login) -// commands come in, post to the LinkQ so that action can be taken outside the -// interrupt handler. -// This circular Q works like Tachyon's que - the producer points to the next -// (unused) entry. Called by Interrupt handler, WorkerThread, Timer -// sputlinkq -void cpqfcTSPutLinkQue( CPQFCHBA *cpqfcHBAdata, - int Type, - void *QueContent) -{ - PTACHYON fcChip = &cpqfcHBAdata->fcChip; -// FC_EXCHANGES *Exchanges = fcChip->Exchanges; - PFC_LINK_QUE fcLQ = cpqfcHBAdata->fcLQ; - ULONG ndx; - - ENTER("cpqfcTSPutLinkQ"); - - ndx = fcLQ->producer; - - ndx += 1; // test for Que full - - - - if( ndx >= FC_LINKQ_DEPTH ) // rollover test - ndx = 0; - - if( ndx == fcLQ->consumer ) // QUE full test - { - // QUE was full! lost LK command (fatal to logic) - fcChip->fcStats.lnkQueFull++; - - printk("*LinkQ Full!*"); - TriggerHBA( fcChip->Registers.ReMapMemBase, 1); -/* - { - int i; - printk("LinkQ PI %d, CI %d\n", fcLQ->producer, - fcLQ->consumer); - - for( i=0; i< FC_LINKQ_DEPTH; ) - { - printk(" [%d]%Xh ", i, fcLQ->Qitem[i].Type); - if( (++i %8) == 0) printk("\n"); - } - - } -*/ - printk( "cpqfcTS: WARNING!! PutLinkQue - FULL!\n"); // we're hung - } - else // QUE next element - { - // Prevent certain multiple (back-to-back) requests. - // This is important in that we don't want to issue multiple - // ABTS for the same Exchange, or do multiple FM inits, etc. - // We can never be sure of the timing of events reported to - // us by Tach's IMQ, which can depend on system/bus speeds, - // FC physical link circumstances, etc. - - if( (fcLQ->producer != fcLQ->consumer) - && - (Type == FMINIT) ) - { - LONG lastNdx; // compute previous producer index - if( fcLQ->producer) - lastNdx = fcLQ->producer- 1; - else - lastNdx = FC_LINKQ_DEPTH-1; - - - if( fcLQ->Qitem[lastNdx].Type == FMINIT) - { -// printk(" *skip FMINIT Q post* "); -// goto DoneWithPutQ; - } - - } - - // OK, add the Q'd item... - - fcLQ->Qitem[fcLQ->producer].Type = Type; - - memcpy( - fcLQ->Qitem[fcLQ->producer].ulBuff, - QueContent, - sizeof(fcLQ->Qitem[fcLQ->producer].ulBuff)); - - fcLQ->producer = ndx; // increment Que producer - - // set semaphore to wake up Kernel (worker) thread - // - up( cpqfcHBAdata->fcQueReady ); - } - -//DoneWithPutQ: - - LEAVE("cpqfcTSPutLinkQ"); -} - - - - -// reset device ext FC link Q -void cpqfcTSLinkQReset( CPQFCHBA *cpqfcHBAdata) - -{ - PFC_LINK_QUE fcLQ = cpqfcHBAdata->fcLQ; - fcLQ->producer = 0; - fcLQ->consumer = 0; - -} - - - - - -// When Tachyon gets an unassisted FCP-SCSI frame, post here so -// an arbitrary context thread (e.g. IOCTL loopback test function) -// can process it. - -// (NOTE: Not revised for Linux) -// This Q works like Tachyon's que - the producer points to the next -// (unused) entry. -void cpqfcTSPutScsiQue( CPQFCHBA *cpqfcHBAdata, - int Type, - void *QueContent) -{ -// CPQFCHBA *cpqfcHBAdata = (CPQFCHBA *)HostAdapter->hostdata; -// PTACHYON fcChip = &cpqfcHBAdata->fcChip; - -// ULONG ndx; - -// ULONG *pExchangeID; -// LONG ExchangeID; - -/* - KeAcquireSpinLockAtDpcLevel( &pDevExt->fcScsiQueLock); - ndx = pDevExt->fcScsiQue.producer + 1; // test for Que full - - if( ndx >= FC_SCSIQ_DEPTH ) // rollover test - ndx = 0; - - if( ndx == pDevExt->fcScsiQue.consumer ) // QUE full test - { - // QUE was full! lost LK command (fatal to logic) - fcChip->fcStats.ScsiQueFull++; -#ifdef DBG - printk( "fcPutScsiQue - FULL!\n"); -#endif - - } - else // QUE next element - { - pDevExt->fcScsiQue.Qitem[pDevExt->fcScsiQue.producer].Type = Type; - - if( Type == FCP_RSP ) - { - // this TL inbound message type means that a TL SEST exchange has - // copied an FCP response frame into a buffer pointed to by the SEST - // entry. That buffer is allocated in the SEST structure at ->RspHDR. - // Copy the RspHDR for use by the Que handler. - pExchangeID = (ULONG *)QueContent; - - memcpy( - pDevExt->fcScsiQue.Qitem[pDevExt->fcScsiQue.producer].ulBuff, - &fcChip->SEST->RspHDR[ *pExchangeID ], - sizeof(pDevExt->fcScsiQue.Qitem[0].ulBuff)); // (any element for size) - - } - else - { - memcpy( - pDevExt->fcScsiQue.Qitem[pDevExt->fcScsiQue.producer].ulBuff, - QueContent, - sizeof(pDevExt->fcScsiQue.Qitem[pDevExt->fcScsiQue.producer].ulBuff)); - } - - pDevExt->fcScsiQue.producer = ndx; // increment Que - - - KeSetEvent( &pDevExt->TYIBscsi, // signal any waiting thread - 0, // no priority boost - FALSE ); // no waiting later for this event - } - KeReleaseSpinLockFromDpcLevel( &pDevExt->fcScsiQueLock); -*/ -} - - - - - - - -static void ProcessELS_Request( CPQFCHBA*,TachFCHDR_GCMND*); - -static void ProcessELS_Reply( CPQFCHBA*,TachFCHDR_GCMND*); - -static void ProcessFCS_Reply( CPQFCHBA*,TachFCHDR_GCMND*); - -void cpqfcTSImplicitLogout( CPQFCHBA* cpqfcHBAdata, - PFC_LOGGEDIN_PORT pFcPort) -{ - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - - if( pFcPort->port_id != 0xFFFC01 ) // don't care about Fabric - { - fcChip->fcStats.logouts++; - printk("cpqfcTS: Implicit logout of WWN %08X%08X, port_id %06X\n", - (ULONG)pFcPort->u.liWWN, - (ULONG)(pFcPort->u.liWWN >>32), - pFcPort->port_id); - - // Terminate I/O with this (Linux) Scsi target - cpqfcTSTerminateExchange( cpqfcHBAdata, - &pFcPort->ScsiNexus, - DEVICE_REMOVED); - } - - // Do an "implicit logout" - we can't really Logout the device - // (i.e. with LOGOut Request) because of port_id confusion - // (i.e. the Other port has no port_id). - // A new login for that WWN will have to re-write port_id (0 invalid) - pFcPort->port_id = 0; // invalid! - pFcPort->pdisc = FALSE; - pFcPort->prli = FALSE; - pFcPort->plogi = FALSE; - pFcPort->flogi = FALSE; - pFcPort->LOGO_timer = 0; - pFcPort->device_blocked = TRUE; // block Scsi Requests - pFcPort->ScsiNexus.VolumeSetAddressing=0; -} - - -// On FC-AL, there is a chance that a previously known device can -// be quietly removed (e.g. with non-managed hub), -// while a NEW device (with different WWN) took the same alpa or -// even 24-bit port_id. This chance is unlikely but we must always -// check for it. -static void TestDuplicatePortId( CPQFCHBA* cpqfcHBAdata, - PFC_LOGGEDIN_PORT pLoggedInPort) -{ - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - // set "other port" at beginning of fcPorts list - PFC_LOGGEDIN_PORT pOtherPortWithPortId = fcChip->fcPorts.pNextPort; - while( pOtherPortWithPortId ) - { - if( (pOtherPortWithPortId->port_id == - pLoggedInPort->port_id) - && - (pOtherPortWithPortId != pLoggedInPort) ) - { - // trouble! (Implicitly) Log the other guy out - printk(" *port_id %Xh is duplicated!* ", - pOtherPortWithPortId->port_id); - cpqfcTSImplicitLogout( cpqfcHBAdata, pOtherPortWithPortId); - } - pOtherPortWithPortId = pOtherPortWithPortId->pNextPort; - } -} - - - - - - -// Dynamic Memory Allocation for newly discovered FC Ports. -// For simplicity, maintain fcPorts structs for ALL -// for discovered devices, including those we never do I/O with -// (e.g. Fabric addresses) - -static PFC_LOGGEDIN_PORT CreateFcPort( - CPQFCHBA* cpqfcHBAdata, - PFC_LOGGEDIN_PORT pLastLoggedInPort, - TachFCHDR_GCMND* fchs, - LOGIN_PAYLOAD* plogi) -{ - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - PFC_LOGGEDIN_PORT pNextLoggedInPort = NULL; - int i; - - - printk("cpqfcTS: New FC port %06Xh WWN: ", fchs->s_id); - for( i=3; i>=0; i--) // copy the LOGIN port's WWN - printk("%02X", plogi->port_name[i]); - for( i=7; i>3; i--) // copy the LOGIN port's WWN - printk("%02X", plogi->port_name[i]); - - - // allocate mem for new port - // (these are small and rare allocations...) - pNextLoggedInPort = kmalloc( sizeof( FC_LOGGEDIN_PORT), GFP_ATOMIC ); - - - // allocation succeeded? Fill out NEW PORT - if( pNextLoggedInPort ) - { - // clear out any garbage (sometimes exists) - memset( pNextLoggedInPort, 0, sizeof( FC_LOGGEDIN_PORT)); - - - // If we login to a Fabric, we don't want to treat it - // as a SCSI device... - if( (fchs->s_id & 0xFFF000) != 0xFFF000) - { - int i; - - // create a unique "virtual" SCSI Nexus (for now, just a - // new target ID) -- we will update channel/target on REPORT_LUNS - // special case for very first SCSI target... - if( cpqfcHBAdata->HostAdapter->max_id == 0) - { - pNextLoggedInPort->ScsiNexus.target = 0; - fcChip->fcPorts.ScsiNexus.target = -1; // don't use "stub" - } - else - { - pNextLoggedInPort->ScsiNexus.target = - cpqfcHBAdata->HostAdapter->max_id; - } - - // initialize the lun[] Nexus struct for lun masking - for( i=0; i< CPQFCTS_MAX_LUN; i++) - pNextLoggedInPort->ScsiNexus.lun[i] = 0xFF; // init to NOT USED - - pNextLoggedInPort->ScsiNexus.channel = 0; // cpqfcTS has 1 FC port - - printk(" SCSI Chan/Trgt %d/%d", - pNextLoggedInPort->ScsiNexus.channel, - pNextLoggedInPort->ScsiNexus.target); - - // tell Scsi layers about the new target... - cpqfcHBAdata->HostAdapter->max_id++; -// printk("HostAdapter->max_id = %d\n", -// cpqfcHBAdata->HostAdapter->max_id); - } - else - { - // device is NOT SCSI (in case of Fabric) - pNextLoggedInPort->ScsiNexus.target = -1; // invalid - } - - // create forward link to new port - pLastLoggedInPort->pNextPort = pNextLoggedInPort; - printk("\n"); - - } - return pNextLoggedInPort; // NULL on allocation failure -} // end NEW PORT (WWN) logic - - - -// For certain cases, we want to terminate exchanges without -// sending ABTS to the device. Examples include when an FC -// device changed it's port_id after Loop re-init, or when -// the device sent us a logout. In the case of changed port_id, -// we want to complete the command and return SOFT_ERROR to -// force a re-try. In the case of LOGOut, we might return -// BAD_TARGET if the device is really gone. -// Since we must ensure that Tachyon is not operating on the -// exchange, we have to freeze the chip -// sterminateex -void cpqfcTSTerminateExchange( - CPQFCHBA* cpqfcHBAdata, SCSI_NEXUS *ScsiNexus, int TerminateStatus) -{ - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - FC_EXCHANGES *Exchanges = fcChip->Exchanges; - ULONG x_ID; - - if( ScsiNexus ) - { -// printk("TerminateExchange: ScsiNexus chan/target %d/%d\n", -// ScsiNexus->channel, ScsiNexus->target); - - } - - for( x_ID = 0; x_ID < TACH_SEST_LEN; x_ID++) - { - if( Exchanges->fcExchange[x_ID].type ) // in use? - { - if( ScsiNexus == NULL ) // our HBA changed - term. all - { - Exchanges->fcExchange[x_ID].status = TerminateStatus; - cpqfcTSPutLinkQue( cpqfcHBAdata, BLS_ABTS, &x_ID ); - } - else - { - // If a device, according to WWN, has been removed, it's - // port_id may be used by another working device, so we - // have to terminate by SCSI target, NOT port_id. - if( Exchanges->fcExchange[x_ID].Cmnd) // Cmnd in progress? - { - if( (Exchanges->fcExchange[x_ID].Cmnd->device->id == ScsiNexus->target) - && - (Exchanges->fcExchange[x_ID].Cmnd->device->channel == ScsiNexus->channel)) - { - Exchanges->fcExchange[x_ID].status = TerminateStatus; - cpqfcTSPutLinkQue( cpqfcHBAdata, BLS_ABTS, &x_ID ); // timed-out - } - } - - // (in case we ever need it...) - // all SEST structures have a remote node ID at SEST DWORD 2 - // if( (fcChip->SEST->u[ x_ID ].TWE.Remote_Node_ID >> 8) - // == port_id) - } - } - } -} - - -static void ProcessELS_Request( - CPQFCHBA* cpqfcHBAdata, TachFCHDR_GCMND* fchs) -{ - PTACHYON fcChip = &cpqfcHBAdata->fcChip; -// FC_EXCHANGES *Exchanges = fcChip->Exchanges; -// ULONG ox_id = (fchs->ox_rx_id >>16); - PFC_LOGGEDIN_PORT pLoggedInPort=NULL, pLastLoggedInPort; - BOOLEAN NeedReject = FALSE; - ULONG ls_reject_code = 0; // default don'n know?? - - - // Check the incoming frame for a supported ELS type - switch( fchs->pl[0] & 0xFFFF) - { - case 0x0050: // PDISC? - - // Payload for PLOGI and PDISC is identical (request & reply) - if( !verify_PLOGI( fcChip, fchs, &ls_reject_code) ) // valid payload? - { - LOGIN_PAYLOAD logi; // FC-PH Port Login - - // PDISC payload OK. If critical login fields - // (e.g. WWN) matches last login for this port_id, - // we may resume any prior exchanges - // with the other port - - - BigEndianSwap( (UCHAR*)&fchs->pl[0], (UCHAR*)&logi, sizeof(logi)); - - pLoggedInPort = fcFindLoggedInPort( - fcChip, - NULL, // don't search Scsi Nexus - 0, // don't search linked list for port_id - &logi.port_name[0], // search linked list for WWN - &pLastLoggedInPort); // must return non-NULL; when a port_id - // is not found, this pointer marks the - // end of the singly linked list - - if( pLoggedInPort != NULL) // WWN found (prior login OK) - { - - if( (fchs->s_id & 0xFFFFFF) == pLoggedInPort->port_id) - { - // Yes. We were expecting PDISC? - if( pLoggedInPort->pdisc ) - { - // Yes; set fields accordingly. (PDISC, not Originator) - SetLoginFields( pLoggedInPort, fchs, TRUE, FALSE); - - // send 'ACC' reply - cpqfcTSPutLinkQue( cpqfcHBAdata, - ELS_PLOGI_ACC, // (PDISC same as PLOGI ACC) - fchs ); - - // OK to resume I/O... - } - else - { - printk("Not expecting PDISC (pdisc=FALSE)\n"); - NeedReject = TRUE; - // set reject reason code - ls_reject_code = - LS_RJT_REASON( PROTOCOL_ERROR, INITIATOR_CTL_ERROR); - } - } - else - { - if( pLoggedInPort->port_id != 0) - { - printk("PDISC PortID change: old %Xh, new %Xh\n", - pLoggedInPort->port_id, fchs->s_id &0xFFFFFF); - } - NeedReject = TRUE; - // set reject reason code - ls_reject_code = - LS_RJT_REASON( PROTOCOL_ERROR, INITIATOR_CTL_ERROR); - - } - } - else - { - printk("PDISC Request from unknown WWN\n"); - NeedReject = TRUE; - - // set reject reason code - ls_reject_code = - LS_RJT_REASON( LOGICAL_ERROR, INVALID_PORT_NAME); - } - - } - else // Payload unacceptable - { - printk("payload unacceptable\n"); - NeedReject = TRUE; // reject code already set - - } - - if( NeedReject) - { - ULONG port_id; - // The PDISC failed. Set login struct flags accordingly, - // terminate any I/O to this port, and Q a PLOGI - if( pLoggedInPort ) - { - pLoggedInPort->pdisc = FALSE; - pLoggedInPort->prli = FALSE; - pLoggedInPort->plogi = FALSE; - - cpqfcTSTerminateExchange( cpqfcHBAdata, - &pLoggedInPort->ScsiNexus, PORTID_CHANGED); - port_id = pLoggedInPort->port_id; - } - else - { - port_id = fchs->s_id &0xFFFFFF; - } - fchs->reserved = ls_reject_code; // borrow this (unused) field - cpqfcTSPutLinkQue( cpqfcHBAdata, ELS_RJT, fchs ); - } - - break; - - - - case 0x0003: // PLOGI? - - // Payload for PLOGI and PDISC is identical (request & reply) - if( !verify_PLOGI( fcChip, fchs, &ls_reject_code) ) // valid payload? - { - LOGIN_PAYLOAD logi; // FC-PH Port Login - BOOLEAN NeedReject = FALSE; - - // PDISC payload OK. If critical login fields - // (e.g. WWN) matches last login for this port_id, - // we may resume any prior exchanges - // with the other port - - - BigEndianSwap( (UCHAR*)&fchs->pl[0], (UCHAR*)&logi, sizeof(logi)); - - pLoggedInPort = fcFindLoggedInPort( - fcChip, - NULL, // don't search Scsi Nexus - 0, // don't search linked list for port_id - &logi.port_name[0], // search linked list for WWN - &pLastLoggedInPort); // must return non-NULL; when a port_id - // is not found, this pointer marks the - // end of the singly linked list - - if( pLoggedInPort == NULL) // WWN not found -New Port - { - pLoggedInPort = CreateFcPort( - cpqfcHBAdata, - pLastLoggedInPort, - fchs, - &logi); - if( pLoggedInPort == NULL ) - { - printk(" cpqfcTS: New port allocation failed - lost FC device!\n"); - // Now Q a LOGOut Request, since we won't be talking to that device - - NeedReject = TRUE; - - // set reject reason code - ls_reject_code = - LS_RJT_REASON( LOGICAL_ERROR, NO_LOGIN_RESOURCES); - - } - } - if( !NeedReject ) - { - - // OK - we have valid fcPort ptr; set fields accordingly. - // (not PDISC, not Originator) - SetLoginFields( pLoggedInPort, fchs, FALSE, FALSE); - - // send 'ACC' reply - cpqfcTSPutLinkQue( cpqfcHBAdata, - ELS_PLOGI_ACC, // (PDISC same as PLOGI ACC) - fchs ); - } - } - else // Payload unacceptable - { - printk("payload unacceptable\n"); - NeedReject = TRUE; // reject code already set - } - - if( NeedReject) - { - // The PDISC failed. Set login struct flags accordingly, - // terminate any I/O to this port, and Q a PLOGI - pLoggedInPort->pdisc = FALSE; - pLoggedInPort->prli = FALSE; - pLoggedInPort->plogi = FALSE; - - fchs->reserved = ls_reject_code; // borrow this (unused) field - - // send 'RJT' reply - cpqfcTSPutLinkQue( cpqfcHBAdata, ELS_RJT, fchs ); - } - - // terminate any exchanges with this device... - if( pLoggedInPort ) - { - cpqfcTSTerminateExchange( cpqfcHBAdata, - &pLoggedInPort->ScsiNexus, PORTID_CHANGED); - } - break; - - - - case 0x1020: // PRLI? - { - BOOLEAN NeedReject = TRUE; - pLoggedInPort = fcFindLoggedInPort( - fcChip, - NULL, // don't search Scsi Nexus - (fchs->s_id & 0xFFFFFF), // search linked list for port_id - NULL, // DON'T search linked list for WWN - NULL); // don't care - - if( pLoggedInPort == NULL ) - { - // huh? - printk(" Unexpected PRLI Request -not logged in!\n"); - - // set reject reason code - ls_reject_code = LS_RJT_REASON( PROTOCOL_ERROR, INITIATOR_CTL_ERROR); - - // Q a LOGOut here? - } - else - { - // verify the PRLI ACC payload - if( !verify_PRLI( fchs, &ls_reject_code) ) - { - // PRLI Reply is acceptable; were we expecting it? - if( pLoggedInPort->plogi ) - { - // yes, we expected the PRLI ACC (not PDISC; not Originator) - SetLoginFields( pLoggedInPort, fchs, FALSE, FALSE); - - // Q an ACCept Reply - cpqfcTSPutLinkQue( cpqfcHBAdata, - ELS_PRLI_ACC, - fchs ); - - NeedReject = FALSE; - } - else - { - // huh? - printk(" (unexpected) PRLI REQEST with plogi FALSE\n"); - - // set reject reason code - ls_reject_code = LS_RJT_REASON( PROTOCOL_ERROR, INITIATOR_CTL_ERROR); - - // Q a LOGOut here? - - } - } - else - { - printk(" PRLI REQUEST payload failed verify\n"); - // (reject code set by "verify") - - // Q a LOGOut here? - } - } - - if( NeedReject ) - { - // Q a ReJecT Reply with reason code - fchs->reserved = ls_reject_code; - cpqfcTSPutLinkQue( cpqfcHBAdata, - ELS_RJT, // Q Type - fchs ); - } - } - break; - - - - - case 0x0005: // LOGOut? - { - // was this LOGOUT because we sent a ELS_PDISC to an FC device - // with changed (or new) port_id, or does the port refuse - // to communicate to us? - // We maintain a logout counter - if we get 3 consecutive LOGOuts, - // give up! - LOGOUT_PAYLOAD logo; - BOOLEAN GiveUpOnDevice = FALSE; - ULONG ls_reject_code = 0; - - BigEndianSwap( (UCHAR*)&fchs->pl[0], (UCHAR*)&logo, sizeof(logo)); - - pLoggedInPort = fcFindLoggedInPort( - fcChip, - NULL, // don't search Scsi Nexus - 0, // don't search linked list for port_id - &logo.port_name[0], // search linked list for WWN - NULL); // don't care about end of list - - if( pLoggedInPort ) // found the device? - { - // Q an ACC reply - cpqfcTSPutLinkQue( cpqfcHBAdata, - ELS_LOGO_ACC, // Q Type - fchs ); // device to respond to - - // set login struct fields (LOGO_counter increment) - SetLoginFields( pLoggedInPort, fchs, FALSE, FALSE); - - // are we an Initiator? - if( fcChip->Options.initiator) - { - // we're an Initiator, so check if we should - // try (another?) login - - // Fabrics routinely log out from us after - // getting device info - don't try to log them - // back in. - if( (fchs->s_id & 0xFFF000) == 0xFFF000 ) - { - ; // do nothing - } - else if( pLoggedInPort->LOGO_counter <= 3) - { - // try (another) login (PLOGI request) - - cpqfcTSPutLinkQue( cpqfcHBAdata, - ELS_PLOGI, // Q Type - fchs ); - - // Terminate I/O with "retry" potential - cpqfcTSTerminateExchange( cpqfcHBAdata, - &pLoggedInPort->ScsiNexus, - PORTID_CHANGED); - } - else - { - printk(" Got 3 LOGOuts - terminating comm. with port_id %Xh\n", - fchs->s_id &&0xFFFFFF); - GiveUpOnDevice = TRUE; - } - } - else - { - GiveUpOnDevice = TRUE; - } - - - if( GiveUpOnDevice == TRUE ) - { - cpqfcTSTerminateExchange( cpqfcHBAdata, - &pLoggedInPort->ScsiNexus, - DEVICE_REMOVED); - } - } - else // we don't know this WWN! - { - // Q a ReJecT Reply with reason code - fchs->reserved = ls_reject_code; - cpqfcTSPutLinkQue( cpqfcHBAdata, - ELS_RJT, // Q Type - fchs ); - } - } - break; - - - - - // FABRIC only case - case 0x0461: // ELS RSCN (Registered State Change Notification)? - { - int Ports; - int i; - __u32 Buff; - // Typically, one or more devices have been added to or dropped - // from the Fabric. - // The format of this frame is defined in FC-FLA (Rev 2.7, Aug 1997) - // The first 32-bit word has a 2-byte Payload Length, which - // includes the 4 bytes of the first word. Consequently, - // this PL len must never be less than 4, must be a multiple of 4, - // and has a specified max value 256. - // (Endianess!) - Ports = ((fchs->pl[0] >>24) - 4) / 4; - Ports = Ports > 63 ? 63 : Ports; - - printk(" RSCN ports: %d\n", Ports); - if( Ports <= 0 ) // huh? - { - // ReJecT the command - fchs->reserved = LS_RJT_REASON( UNABLE_TO_PERFORM, 0); - - cpqfcTSPutLinkQue( cpqfcHBAdata, - ELS_RJT, // Q Type - fchs ); - - break; - } - else // Accept the command - { - cpqfcTSPutLinkQue( cpqfcHBAdata, - ELS_ACC, // Q Type - fchs ); - } - - // Check the "address format" to determine action. - // We have 3 cases: - // 0 = Port Address; 24-bit address of affected device - // 1 = Area Address; MS 16 bits valid - // 2 = Domain Address; MS 8 bits valid - for( i=0; i<Ports; i++) - { - BigEndianSwap( (UCHAR*)&fchs->pl[i+1],(UCHAR*)&Buff, 4); - switch( Buff & 0xFF000000) - { - - case 0: // Port Address? - - case 0x01000000: // Area Domain? - case 0x02000000: // Domain Address - // For example, "port_id" 0x201300 - // OK, let's try a Name Service Request (Query) - fchs->s_id = 0xFFFFFC; // Name Server Address - cpqfcTSPutLinkQue( cpqfcHBAdata, FCS_NSR, fchs); - - break; - - - default: // huh? new value on version change? - break; - } - } - } - break; - - - - - default: // don't support this request (yet) - // set reject reason code - fchs->reserved = LS_RJT_REASON( UNABLE_TO_PERFORM, - REQUEST_NOT_SUPPORTED); - - cpqfcTSPutLinkQue( cpqfcHBAdata, - ELS_RJT, // Q Type - fchs ); - break; - } -} - - -static void ProcessELS_Reply( - CPQFCHBA* cpqfcHBAdata, TachFCHDR_GCMND* fchs) -{ - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - FC_EXCHANGES *Exchanges = fcChip->Exchanges; - ULONG ox_id = (fchs->ox_rx_id >>16); - ULONG ls_reject_code; - PFC_LOGGEDIN_PORT pLoggedInPort, pLastLoggedInPort; - - // If this is a valid reply, then we MUST have sent a request. - // Verify that we can find a valid request OX_ID corresponding to - // this reply - - - if( Exchanges->fcExchange[(fchs->ox_rx_id >>16)].type == 0) - { - printk(" *Discarding ACC/RJT frame, xID %04X/%04X* ", - ox_id, fchs->ox_rx_id & 0xffff); - goto Quit; // exit this routine - } - - - // Is the reply a RJT (reject)? - if( (fchs->pl[0] & 0xFFFFL) == 0x01) // Reject reply? - { -// ****** REJECT REPLY ******** - switch( Exchanges->fcExchange[ox_id].type ) - { - - case ELS_FDISC: // we sent out Fabric Discovery - case ELS_FLOGI: // we sent out FLOGI - - printk("RJT received on Fabric Login from %Xh, reason %Xh\n", - fchs->s_id, fchs->pl[1]); - - break; - - default: - break; - } - - goto Done; - } - - // OK, we have an ACCept... - // What's the ACC type? (according to what we sent) - switch( Exchanges->fcExchange[ox_id].type ) - { - - case ELS_PLOGI: // we sent out PLOGI - if( !verify_PLOGI( fcChip, fchs, &ls_reject_code) ) - { - LOGIN_PAYLOAD logi; // FC-PH Port Login - - // login ACC payload acceptable; search for WWN in our list - // of fcPorts - - BigEndianSwap( (UCHAR*)&fchs->pl[0], (UCHAR*)&logi, sizeof(logi)); - - pLoggedInPort = fcFindLoggedInPort( - fcChip, - NULL, // don't search Scsi Nexus - 0, // don't search linked list for port_id - &logi.port_name[0], // search linked list for WWN - &pLastLoggedInPort); // must return non-NULL; when a port_id - // is not found, this pointer marks the - // end of the singly linked list - - if( pLoggedInPort == NULL) // WWN not found - new port - { - - pLoggedInPort = CreateFcPort( - cpqfcHBAdata, - pLastLoggedInPort, - fchs, - &logi); - - if( pLoggedInPort == NULL ) - { - printk(" cpqfcTS: New port allocation failed - lost FC device!\n"); - // Now Q a LOGOut Request, since we won't be talking to that device - - goto Done; // exit with error! dropped login frame - } - } - else // WWN was already known. Ensure that any open - // exchanges for this WWN are terminated. - // NOTE: It's possible that a device can change its - // 24-bit port_id after a Link init or Fabric change - // (e.g. LIP or Fabric RSCN). In that case, the old - // 24-bit port_id may be duplicated, or no longer exist. - { - - cpqfcTSTerminateExchange( cpqfcHBAdata, - &pLoggedInPort->ScsiNexus, PORTID_CHANGED); - } - - // We have an fcPort struct - set fields accordingly - // not PDISC, originator - SetLoginFields( pLoggedInPort, fchs, FALSE, TRUE); - - // We just set a "port_id"; is it duplicated? - TestDuplicatePortId( cpqfcHBAdata, pLoggedInPort); - - // For Fabric operation, we issued PLOGI to 0xFFFFFC - // so we can send SCR (State Change Registration) - // Check for this special case... - if( fchs->s_id == 0xFFFFFC ) - { - // PLOGI ACC was a Fabric response... issue SCR - fchs->s_id = 0xFFFFFD; // address for SCR - cpqfcTSPutLinkQue( cpqfcHBAdata, ELS_SCR, fchs); - } - - else - { - // Now we need a PRLI to enable FCP-SCSI operation - // set flags and Q up a ELS_PRLI - cpqfcTSPutLinkQue( cpqfcHBAdata, ELS_PRLI, fchs); - } - } - else - { - // login payload unacceptable - reason in ls_reject_code - // Q up a Logout Request - printk("Login Payload unacceptable\n"); - - } - break; - - - // PDISC logic very similar to PLOGI, except we never want - // to allocate mem for "new" port, and we set flags differently - // (might combine later with PLOGI logic for efficiency) - case ELS_PDISC: // we sent out PDISC - if( !verify_PLOGI( fcChip, fchs, &ls_reject_code) ) - { - LOGIN_PAYLOAD logi; // FC-PH Port Login - BOOLEAN NeedLogin = FALSE; - - // login payload acceptable; search for WWN in our list - // of (previously seen) fcPorts - - BigEndianSwap( (UCHAR*)&fchs->pl[0], (UCHAR*)&logi, sizeof(logi)); - - pLoggedInPort = fcFindLoggedInPort( - fcChip, - NULL, // don't search Scsi Nexus - 0, // don't search linked list for port_id - &logi.port_name[0], // search linked list for WWN - &pLastLoggedInPort); // must return non-NULL; when a port_id - // is not found, this pointer marks the - // end of the singly linked list - - if( pLoggedInPort != NULL) // WWN found? - { - // WWN has same port_id as last login? (Of course, a properly - // working FC device should NEVER ACCept a PDISC if it's - // port_id changed, but check just in case...) - if( (fchs->s_id & 0xFFFFFF) == pLoggedInPort->port_id) - { - // Yes. We were expecting PDISC? - if( pLoggedInPort->pdisc ) - { - int i; - - - // PDISC expected -- set fields. (PDISC, Originator) - SetLoginFields( pLoggedInPort, fchs, TRUE, TRUE); - - // We are ready to resume FCP-SCSI to this device... - // Do we need to start anything that was Queued? - - for( i=0; i< TACH_SEST_LEN; i++) - { - // see if any exchange for this PDISC'd port was queued - if( ((fchs->s_id &0xFFFFFF) == - (Exchanges->fcExchange[i].fchs.d_id & 0xFFFFFF)) - && - (Exchanges->fcExchange[i].status & EXCHANGE_QUEUED)) - { - fchs->reserved = i; // copy ExchangeID -// printk(" *Q x_ID %Xh after PDISC* ",i); - - cpqfcTSPutLinkQue( cpqfcHBAdata, EXCHANGE_QUEUED, fchs ); - } - } - - // Complete commands Q'd while we were waiting for Login - - UnblockScsiDevice( cpqfcHBAdata->HostAdapter, pLoggedInPort); - } - else - { - printk("Not expecting PDISC (pdisc=FALSE)\n"); - NeedLogin = TRUE; - } - } - else - { - printk("PDISC PortID change: old %Xh, new %Xh\n", - pLoggedInPort->port_id, fchs->s_id &0xFFFFFF); - NeedLogin = TRUE; - - } - } - else - { - printk("PDISC ACC from unknown WWN\n"); - NeedLogin = TRUE; - } - - if( NeedLogin) - { - - // The PDISC failed. Set login struct flags accordingly, - // terminate any I/O to this port, and Q a PLOGI - if( pLoggedInPort ) // FC device previously known? - { - - cpqfcTSPutLinkQue( cpqfcHBAdata, - ELS_LOGO, // Q Type - fchs ); // has port_id to send to - - // There are a variety of error scenarios which can result - // in PDISC failure, so as a catchall, add the check for - // duplicate port_id. - TestDuplicatePortId( cpqfcHBAdata, pLoggedInPort); - -// TriggerHBA( fcChip->Registers.ReMapMemBase, 0); - pLoggedInPort->pdisc = FALSE; - pLoggedInPort->prli = FALSE; - pLoggedInPort->plogi = FALSE; - - cpqfcTSTerminateExchange( cpqfcHBAdata, - &pLoggedInPort->ScsiNexus, PORTID_CHANGED); - } - cpqfcTSPutLinkQue( cpqfcHBAdata, ELS_PLOGI, fchs ); - } - } - else - { - // login payload unacceptable - reason in ls_reject_code - // Q up a Logout Request - printk("ERROR: Login Payload unacceptable!\n"); - - } - - break; - - - - case ELS_PRLI: // we sent out PRLI - - - pLoggedInPort = fcFindLoggedInPort( - fcChip, - NULL, // don't search Scsi Nexus - (fchs->s_id & 0xFFFFFF), // search linked list for port_id - NULL, // DON'T search linked list for WWN - NULL); // don't care - - if( pLoggedInPort == NULL ) - { - // huh? - printk(" Unexpected PRLI ACCept frame!\n"); - - // Q a LOGOut here? - - goto Done; - } - - // verify the PRLI ACC payload - if( !verify_PRLI( fchs, &ls_reject_code) ) - { - // PRLI Reply is acceptable; were we expecting it? - if( pLoggedInPort->plogi ) - { - // yes, we expected the PRLI ACC (not PDISC; Originator) - SetLoginFields( pLoggedInPort, fchs, FALSE, TRUE); - - // OK, let's send a REPORT_LUNS command to determine - // whether VSA or PDA FCP-LUN addressing is used. - - cpqfcTSPutLinkQue( cpqfcHBAdata, SCSI_REPORT_LUNS, fchs ); - - // It's possible that a device we were talking to changed - // port_id, and has logged back in. This function ensures - // that I/O will resume. - UnblockScsiDevice( cpqfcHBAdata->HostAdapter, pLoggedInPort); - - } - else - { - // huh? - printk(" (unexpected) PRLI ACCept with plogi FALSE\n"); - - // Q a LOGOut here? - goto Done; - } - } - else - { - printk(" PRLI ACCept payload failed verify\n"); - - // Q a LOGOut here? - } - - break; - - case ELS_FLOGI: // we sent out FLOGI (Fabric Login) - - // update the upper 16 bits of our port_id in Tachyon - // the switch adds those upper 16 bits when responding - // to us (i.e. we are the destination_id) - fcChip->Registers.my_al_pa = (fchs->d_id & 0xFFFFFF); - writel( fcChip->Registers.my_al_pa, - fcChip->Registers.ReMapMemBase + TL_MEM_TACH_My_ID); - - // now send out a PLOGI to the well known port_id 0xFFFFFC - fchs->s_id = 0xFFFFFC; - cpqfcTSPutLinkQue( cpqfcHBAdata, ELS_PLOGI, fchs); - - break; - - - case ELS_FDISC: // we sent out FDISC (Fabric Discovery (Login)) - - printk( " ELS_FDISC success "); - break; - - - case ELS_SCR: // we sent out State Change Registration - // now we can issue Name Service Request to find any - // Fabric-connected devices we might want to login to. - - - fchs->s_id = 0xFFFFFC; // Name Server Address - cpqfcTSPutLinkQue( cpqfcHBAdata, FCS_NSR, fchs); - - - break; - - - default: - printk(" *Discarding unknown ACC frame, xID %04X/%04X* ", - ox_id, fchs->ox_rx_id & 0xffff); - break; - } - - -Done: - // Regardless of whether the Reply is valid or not, the - // the exchange is done - complete - cpqfcTSCompleteExchange(cpqfcHBAdata->PciDev, fcChip, (fchs->ox_rx_id >>16)); - -Quit: - return; -} - - - - - - -// **************** Fibre Channel Services ************** -// This is where we process the Directory (Name) Service Reply -// to know which devices are on the Fabric - -static void ProcessFCS_Reply( - CPQFCHBA* cpqfcHBAdata, TachFCHDR_GCMND* fchs) -{ - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - FC_EXCHANGES *Exchanges = fcChip->Exchanges; - ULONG ox_id = (fchs->ox_rx_id >>16); -// ULONG ls_reject_code; -// PFC_LOGGEDIN_PORT pLoggedInPort, pLastLoggedInPort; - - // If this is a valid reply, then we MUST have sent a request. - // Verify that we can find a valid request OX_ID corresponding to - // this reply - - if( Exchanges->fcExchange[(fchs->ox_rx_id >>16)].type == 0) - { - printk(" *Discarding Reply frame, xID %04X/%04X* ", - ox_id, fchs->ox_rx_id & 0xffff); - goto Quit; // exit this routine - } - - - // OK, we were expecting it. Now check to see if it's a - // "Name Service" Reply, and if so force a re-validation of - // Fabric device logins (i.e. Start the login timeout and - // send PDISC or PLOGI) - // (Endianess Byte Swap?) - if( fchs->pl[1] == 0x02FC ) // Name Service - { - // got a new (or NULL) list of Fabric attach devices... - // Invalidate current logins - - PFC_LOGGEDIN_PORT pLoggedInPort = &fcChip->fcPorts; - while( pLoggedInPort ) // for all ports which are expecting - // PDISC after the next LIP, set the - // logoutTimer - { - - if( (pLoggedInPort->port_id & 0xFFFF00) // Fabric device? - && - (pLoggedInPort->port_id != 0xFFFFFC) ) // NOT the F_Port - { - pLoggedInPort->LOGO_timer = 6; // what's the Fabric timeout?? - // suspend any I/O in progress until - // PDISC received... - pLoggedInPort->prli = FALSE; // block FCP-SCSI commands - } - - pLoggedInPort = pLoggedInPort->pNextPort; - } - - if( fchs->pl[2] == 0x0280) // ACCept? - { - // Send PLOGI or PDISC to these Fabric devices - SendLogins( cpqfcHBAdata, &fchs->pl[4] ); - } - - - // As of this writing, the only reason to reject is because NO - // devices are left on the Fabric. We already started - // "logged out" timers; if the device(s) don't come - // back, we'll do the implicit logout in the heart beat - // timer routine - else // ReJecT - { - // this just means no Fabric device is visible at this instant - } - } - - // Regardless of whether the Reply is valid or not, the - // the exchange is done - complete - cpqfcTSCompleteExchange(cpqfcHBAdata->PciDev, fcChip, (fchs->ox_rx_id >>16)); - -Quit: - return; -} - - - - - - - -static void AnalyzeIncomingFrame( - CPQFCHBA *cpqfcHBAdata, - ULONG QNdx ) -{ - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - FC_EXCHANGES *Exchanges = fcChip->Exchanges; - PFC_LINK_QUE fcLQ = cpqfcHBAdata->fcLQ; - TachFCHDR_GCMND* fchs = - (TachFCHDR_GCMND*)fcLQ->Qitem[QNdx].ulBuff; -// ULONG ls_reject_code; // reason for rejecting login - LONG ExchangeID; -// FC_LOGGEDIN_PORT *pLoggedInPort; - BOOLEAN AbortAccept; - - ENTER("AnalyzeIncomingFrame"); - - - - switch( fcLQ->Qitem[QNdx].Type) // FCP or Unknown - { - - case SFQ_UNKNOWN: // unknown frame (e.g. LIP position frame, NOP, etc.) - - - // ********* FC-4 Device Data/ Fibre Channel Service ************* - if( ((fchs->d_id &0xF0000000) == 0) // R_CTL (upper nibble) 0x0? - && - (fchs->f_ctl & 0x20000000) ) // TYPE 20h is Fibre Channel Service - { - - // ************** FCS Reply ********************** - - if( (fchs->d_id & 0xff000000L) == 0x03000000L) // (31:23 R_CTL) - { - ProcessFCS_Reply( cpqfcHBAdata, fchs ); - - } // end of FCS logic - - } - - - // *********** Extended Link Service ************** - - else if( fchs->d_id & 0x20000000 // R_CTL 0x2? - && - (fchs->f_ctl & 0x01000000) ) // TYPE = 1 - { - - // these frames are either a response to - // something we sent (0x23) or "unsolicited" - // frames (0x22). - - - // **************Extended Link REPLY ********************** - // R_CTL Solicited Control Reply - - if( (fchs->d_id & 0xff000000L) == 0x23000000L) // (31:23 R_CTL) - { - - ProcessELS_Reply( cpqfcHBAdata, fchs ); - - } // end of "R_CTL Solicited Control Reply" - - - - - // **************Extended Link REQUEST ********************** - // (unsolicited commands from another port or task...) - - // R_CTL Ext Link REQUEST - else if( (fchs->d_id & 0xff000000L) == 0x22000000L && - (fchs->ox_rx_id != 0xFFFFFFFFL) ) // (ignore LIP frame) - { - - - - ProcessELS_Request( cpqfcHBAdata, fchs ); - - } - - - - // ************** LILP ********************** - else if( (fchs->d_id & 0xff000000L) == 0x22000000L && - (fchs->ox_rx_id == 0xFFFFFFFFL)) // (e.g., LIP frames) - - { - // SANMark specifies that when available, we must use - // the LILP frame to determine which ALPAs to send Port Discovery - // to... - - if( fchs->pl[0] == 0x0711L) // ELS_PLOGI? - { -// UCHAR *ptr = (UCHAR*)&fchs->pl[1]; -// printk(" %d ALPAs found\n", *ptr); - memcpy( fcChip->LILPmap, &fchs->pl[1], 32*4); // 32 DWORDs - fcChip->Options.LILPin = 1; // our LILPmap is valid! - // now post to make Port Discovery happen... - cpqfcTSPutLinkQue( cpqfcHBAdata, LINKACTIVE, fchs); - } - } - } - - - // ***************** BASIC LINK SERVICE ***************** - - else if( fchs->d_id & 0x80000000 // R_CTL: - && // Basic Link Service Request - !(fchs->f_ctl & 0xFF000000) ) // type=0 for BLS - { - - // Check for ABTS (Abort Sequence) - if( (fchs->d_id & 0x8F000000) == 0x81000000) - { - // look for OX_ID, S_ID pair that matches in our - // fcExchanges table; if found, reply with ACCept and complete - // the exchange - - // Per PLDA, an ABTS is sent by an initiator; therefore - // assume that if we have an exhange open to the port who - // sent ABTS, it will be the d_id of what we sent. - for( ExchangeID = 0, AbortAccept=FALSE; - ExchangeID < TACH_SEST_LEN; ExchangeID++) - { - // Valid "target" exchange 24-bit port_id matches? - // NOTE: For the case of handling Intiator AND Target - // functions on the same chip, we can have TWO Exchanges - // with the same OX_ID -- OX_ID/FFFF for the CMND, and - // OX_ID/RX_ID for the XRDY or DATA frame(s). Ideally, - // we would like to support ABTS from Initiators or Targets, - // but it's not clear that can be supported on Tachyon for - // all cases (requires more investigation). - - if( (Exchanges->fcExchange[ ExchangeID].type == SCSI_TWE || - Exchanges->fcExchange[ ExchangeID].type == SCSI_TRE) - && - ((Exchanges->fcExchange[ ExchangeID].fchs.d_id & 0xFFFFFF) == - (fchs->s_id & 0xFFFFFF)) ) - { - - // target xchnge port_id matches -- how about OX_ID? - if( (Exchanges->fcExchange[ ExchangeID].fchs.ox_rx_id &0xFFFF0000) - == (fchs->ox_rx_id & 0xFFFF0000) ) - // yes! post ACCept response; will be completed by fcStart - { - Exchanges->fcExchange[ ExchangeID].status = TARGET_ABORT; - - // copy (add) rx_id field for simplified ACCept reply - fchs->ox_rx_id = - Exchanges->fcExchange[ ExchangeID].fchs.ox_rx_id; - - cpqfcTSPutLinkQue( cpqfcHBAdata, - BLS_ABTS_ACC, // Q Type - fchs ); // void QueContent - AbortAccept = TRUE; - printk("ACCepting ABTS for x_ID %8.8Xh, SEST pair %8.8Xh\n", - fchs->ox_rx_id, Exchanges->fcExchange[ ExchangeID].fchs.ox_rx_id); - break; // ABTS can affect only ONE exchange -exit loop - } - } - } // end of FOR loop - if( !AbortAccept ) // can't ACCept ABTS - send Reject - { - printk("ReJecTing: can't find ExchangeID %8.8Xh for ABTS command\n", - fchs->ox_rx_id); - if( Exchanges->fcExchange[ ExchangeID].type - && - !(fcChip->SEST->u[ ExchangeID].IWE.Hdr_Len - & 0x80000000)) - { - cpqfcTSCompleteExchange( cpqfcHBAdata->PciDev, fcChip, ExchangeID); - } - else - { - printk("Unexpected ABTS ReJecT! SEST[%X] Dword 0: %Xh\n", - ExchangeID, fcChip->SEST->u[ ExchangeID].IWE.Hdr_Len); - } - } - } - - // Check for BLS {ABTS? (Abort Sequence)} ACCept - else if( (fchs->d_id & 0x8F000000) == 0x84000000) - { - // target has responded with ACC for our ABTS; - // complete the indicated exchange with ABORTED status - // Make no checks for correct RX_ID, since - // all we need to conform ABTS ACC is the OX_ID. - // Verify that the d_id matches! - - ExchangeID = (fchs->ox_rx_id >> 16) & 0x7FFF; // x_id from ACC -// printk("ABTS ACC x_ID 0x%04X 0x%04X, status %Xh\n", -// fchs->ox_rx_id >> 16, fchs->ox_rx_id & 0xffff, -// Exchanges->fcExchange[ExchangeID].status); - - - - if( ExchangeID < TACH_SEST_LEN ) // x_ID makes sense - { - // Does "target" exchange 24-bit port_id match? - // (See "NOTE" above for handling Intiator AND Target in - // the same device driver) - // First, if this is a target response, then we originated - // (initiated) it with BLS_ABTS: - - if( (Exchanges->fcExchange[ ExchangeID].type == BLS_ABTS) - - && - // Second, does the source of this ACC match the destination - // of who we originally sent it to? - ((Exchanges->fcExchange[ ExchangeID].fchs.d_id & 0xFFFFFF) == - (fchs->s_id & 0xFFFFFF)) ) - { - cpqfcTSCompleteExchange( cpqfcHBAdata->PciDev, fcChip, ExchangeID ); - } - } - } - // Check for BLS {ABTS? (Abort Sequence)} ReJecT - else if( (fchs->d_id & 0x8F000000) == 0x85000000) - { - // target has responded with RJT for our ABTS; - // complete the indicated exchange with ABORTED status - // Make no checks for correct RX_ID, since - // all we need to conform ABTS ACC is the OX_ID. - // Verify that the d_id matches! - - ExchangeID = (fchs->ox_rx_id >> 16) & 0x7FFF; // x_id from ACC -// printk("BLS_ABTS RJT on Exchange 0x%04X 0x%04X\n", -// fchs->ox_rx_id >> 16, fchs->ox_rx_id & 0xffff); - - if( ExchangeID < TACH_SEST_LEN ) // x_ID makes sense - { - // Does "target" exchange 24-bit port_id match? - // (See "NOTE" above for handling Intiator AND Target in - // the same device driver) - // First, if this is a target response, then we originated - // (initiated) it with BLS_ABTS: - - if( (Exchanges->fcExchange[ ExchangeID].type == BLS_ABTS) - - && - // Second, does the source of this ACC match the destination - // of who we originally sent it to? - ((Exchanges->fcExchange[ ExchangeID].fchs.d_id & 0xFFFFFF) == - (fchs->s_id & 0xFFFFFF)) ) - { - // YES! NOTE: There is a bug in CPQ's RA-4000 box - // where the "reason code" isn't returned in the payload - // For now, simply presume the reject is because the target - // already completed the exchange... - -// printk("complete x_ID %Xh on ABTS RJT\n", ExchangeID); - cpqfcTSCompleteExchange( cpqfcHBAdata->PciDev, fcChip, ExchangeID ); - } - } - } // end of ABTS check - } // end of Basic Link Service Request - break; - - default: - printk("AnalyzeIncomingFrame: unknown type: %Xh(%d)\n", - fcLQ->Qitem[QNdx].Type, - fcLQ->Qitem[QNdx].Type); - break; - } -} - - -// Function for Port Discovery necessary after every FC -// initialization (e.g. LIP). -// Also may be called if from Fabric Name Service logic. - -static void SendLogins( CPQFCHBA *cpqfcHBAdata, __u32 *FabricPortIds ) -{ - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - FC_EXCHANGES *Exchanges = fcChip->Exchanges; - ULONG ulStatus=0; - TachFCHDR_GCMND fchs; // copy fields for transmission - int i; - ULONG loginType; - LONG ExchangeID; - PFC_LOGGEDIN_PORT pLoggedInPort; - __u32 PortIds[ number_of_al_pa]; - int NumberOfPorts=0; - - // We're going to presume (for now) that our limit of Fabric devices - // is the same as the number of alpa on a private loop (126 devices). - // (Of course this could be changed to support however many we have - // memory for). - memset( &PortIds[0], 0, sizeof(PortIds)); - - // First, check if this login is for our own Link Initialization - // (e.g. LIP on FC-AL), or if we have knowledge of Fabric devices - // from a switch. If we are logging into Fabric devices, we'll - // have a non-NULL FabricPortId pointer - - if( FabricPortIds != NULL) // may need logins - { - int LastPort=FALSE; - i = 0; - while( !LastPort) - { - // port IDs From NSR payload; byte swap needed? - BigEndianSwap( (UCHAR*)FabricPortIds, (UCHAR*)&PortIds[i], 4); - -// printk("FPortId[%d] %Xh ", i, PortIds[i]); - if( PortIds[i] & 0x80000000) - LastPort = TRUE; - - PortIds[i] &= 0xFFFFFF; // get 24-bit port_id - // some non-Fabric devices (like the Crossroads Fibre/Scsi bridge) - // erroneously use ALPA 0. - if( PortIds[i] ) // need non-zero port_id... - i++; - - if( i >= number_of_al_pa ) // (in)sanity check - break; - FabricPortIds++; // next... - } - - NumberOfPorts = i; -// printk("NumberOf Fabric ports %d", NumberOfPorts); - } - - else // need to send logins on our "local" link - { - - // are we a loop port? If so, check for reception of LILP frame, - // and if received use it (SANMark requirement) - if( fcChip->Options.LILPin ) - { - int j=0; - // sanity check on number of ALPAs from LILP frame... - // For format of LILP frame, see FC-AL specs or - // "Fibre Channel Bench Reference", J. Stai, 1995 (ISBN 1-879936-17-8) - // First byte is number of ALPAs - i = fcChip->LILPmap[0] >= (32*4) ? 32*4 : fcChip->LILPmap[0]; - NumberOfPorts = i; -// printk(" LILP alpa count %d ", i); - while( i > 0) - { - PortIds[j] = fcChip->LILPmap[1+ j]; - j++; i--; - } - } - else // have to send login to everybody - { - int j=0; - i = number_of_al_pa; - NumberOfPorts = i; - while( i > 0) - { - PortIds[j] = valid_al_pa[j]; // all legal ALPAs - j++; i--; - } - } - } - - - // Now we have a copy of the port_ids (and how many)... - for( i = 0; i < NumberOfPorts; i++) - { - // 24-bit FC Port ID - fchs.s_id = PortIds[i]; // note: only 8-bits used for ALPA - - - // don't log into ourselves (Linux Scsi disk scan will stop on - // no TARGET support error on us, and quit trying for rest of devices) - if( (fchs.s_id & 0xFF ) == (fcChip->Registers.my_al_pa & 0xFF) ) - continue; - - // fabric login needed? - if( (fchs.s_id == 0) || - (fcChip->Options.fabric == 1) ) - { - fcChip->Options.flogi = 1; // fabric needs longer for login - // Do we need FLOGI or FDISC? - pLoggedInPort = fcFindLoggedInPort( - fcChip, - NULL, // don't search SCSI Nexus - 0xFFFFFC, // search linked list for Fabric port_id - NULL, // don't search WWN - NULL); // (don't care about end of list) - - if( pLoggedInPort ) // If found, we have prior experience with - // this port -- check whether PDISC is needed - { - if( pLoggedInPort->flogi ) - { - // does the switch support FDISC?? (FLOGI for now...) - loginType = ELS_FLOGI; // prior FLOGI still valid - } - else - loginType = ELS_FLOGI; // expired FLOGI - } - else // first FLOGI? - loginType = ELS_FLOGI; - - - fchs.s_id = 0xFFFFFE; // well known F_Port address - - // Fabrics are not required to support FDISC, and - // it's not clear if that helps us anyway, since - // we'll want a Name Service Request to re-verify - // visible devices... - // Consequently, we always want our upper 16 bit - // port_id to be zero (we'll be rejected if we - // use our prior port_id if we've been plugged into - // a different switch port). - // Trick Tachyon to send to ALPA 0 (see TL/TS UG, pg 87) - // If our ALPA is 55h for instance, we want the FC frame - // s_id to be 0x000055, while Tach's my_al_pa register - // must be 0x000155, to force an OPN at ALPA 0 - // (the Fabric port) - fcChip->Registers.my_al_pa &= 0xFF; // only use ALPA for FLOGI - writel( fcChip->Registers.my_al_pa | 0x0100, - fcChip->Registers.ReMapMemBase + TL_MEM_TACH_My_ID); - } - - else // not FLOGI... - { - // should we send PLOGI or PDISC? Check if any prior port_id - // (e.g. alpa) completed a PLOGI/PRLI exchange by checking - // the pdisc flag. - - pLoggedInPort = fcFindLoggedInPort( - fcChip, - NULL, // don't search SCSI Nexus - fchs.s_id, // search linked list for al_pa - NULL, // don't search WWN - NULL); // (don't care about end of list) - - - - if( pLoggedInPort ) // If found, we have prior experience with - // this port -- check whether PDISC is needed - { - if( pLoggedInPort->pdisc ) - { - loginType = ELS_PDISC; // prior PLOGI and PRLI maybe still valid - - } - else - loginType = ELS_PLOGI; // prior knowledge, but can't use PDISC - } - else // never talked to this port_id before - loginType = ELS_PLOGI; // prior knowledge, but can't use PDISC - } - - - - ulStatus = cpqfcTSBuildExchange( - cpqfcHBAdata, - loginType, // e.g. PLOGI - &fchs, // no incoming frame (we are originator) - NULL, // no data (no scatter/gather list) - &ExchangeID );// fcController->fcExchanges index, -1 if failed - - if( !ulStatus ) // Exchange setup OK? - { - ulStatus = cpqfcTSStartExchange( cpqfcHBAdata, ExchangeID ); - if( !ulStatus ) - { - // submitted to Tach's Outbound Que (ERQ PI incremented) - // waited for completion for ELS type (Login frames issued - // synchronously) - - if( loginType == ELS_PDISC ) - { - // now, we really shouldn't Revalidate SEST exchanges until - // we get an ACC reply from our target and verify that - // the target address/WWN is unchanged. However, when a fast - // target gets the PDISC, they can send SEST Exchange data - // before we even get around to processing the PDISC ACC. - // Consequently, we lose the I/O. - // To avoid this, go ahead and Revalidate when the PDISC goes - // out, anticipating that the ACC will be truly acceptable - // (this happens 99.9999....% of the time). - // If we revalidate a SEST write, and write data goes to a - // target that is NOT the one we originated the WRITE to, - // that target is required (FCP-SCSI specs, etc) to discard - // our WRITE data. - - // Re-validate SEST entries (Tachyon hardware assists) - RevalidateSEST( cpqfcHBAdata->HostAdapter, pLoggedInPort); - //TriggerHBA( fcChip->Registers.ReMapMemBase, 1); - } - } - else // give up immediately on error - { -#ifdef LOGIN_DBG - printk("SendLogins: fcStartExchange failed: %Xh\n", ulStatus ); -#endif - break; - } - - - if( fcChip->Registers.FMstatus.value & 0x080 ) // LDn during Port Disc. - { - ulStatus = LNKDWN_OSLS; -#ifdef LOGIN_DBG - printk("SendLogins: PortDisc aborted (LDn) @alpa %Xh\n", fchs.s_id); -#endif - break; - } - // Check the exchange for bad status (i.e. FrameTimeOut), - // and complete on bad status (most likely due to BAD_ALPA) - // on LDn, DPC function may already complete (ABORT) a started - // exchange, so check type first (type = 0 on complete). - if( Exchanges->fcExchange[ExchangeID].status ) - { -#ifdef LOGIN_DBG - printk("completing x_ID %X on status %Xh\n", - ExchangeID, Exchanges->fcExchange[ExchangeID].status); -#endif - cpqfcTSCompleteExchange( cpqfcHBAdata->PciDev, fcChip, ExchangeID); - } - } - else // Xchange setup failed... - { -#ifdef LOGIN_DBG - printk("FC: cpqfcTSBuildExchange failed: %Xh\n", ulStatus ); -#endif - break; - } - } - if( !ulStatus ) - { - // set the event signifying that all ALPAs were sent out. -#ifdef LOGIN_DBG - printk("SendLogins: PortDiscDone\n"); -#endif - cpqfcHBAdata->PortDiscDone = 1; - - - // TL/TS UG, pg. 184 - // 0x0065 = 100ms for RT_TOV - // 0x01f5 = 500ms for ED_TOV - fcChip->Registers.ed_tov.value = 0x006501f5L; - writel( fcChip->Registers.ed_tov.value, - (fcChip->Registers.ed_tov.address)); - - // set the LP_TOV back to ED_TOV (i.e. 500 ms) - writel( 0x00000010, fcChip->Registers.ReMapMemBase +TL_MEM_FM_TIMEOUT2); - } - else - { - printk("SendLogins: failed at xchng %Xh, alpa %Xh, status %Xh\n", - ExchangeID, fchs.s_id, ulStatus); - } - LEAVE("SendLogins"); - -} - - -// for REPORT_LUNS documentation, see "In-Depth Exploration of Scsi", -// D. Deming, 1994, pg 7-19 (ISBN 1-879936-08-9) -static void ScsiReportLunsDone(Scsi_Cmnd *Cmnd) -{ - struct Scsi_Host *HostAdapter = Cmnd->device->host; - CPQFCHBA *cpqfcHBAdata = (CPQFCHBA *)HostAdapter->hostdata; - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - FC_EXCHANGES *Exchanges = fcChip->Exchanges; - PFC_LOGGEDIN_PORT pLoggedInPort; - int LunListLen=0; - int i; - ULONG x_ID = 0xFFFFFFFF; - UCHAR *ucBuff = Cmnd->request_buffer; - -// printk("cpqfcTS: ReportLunsDone \n"); - // first, we need to find the Exchange for this command, - // so we can find the fcPort struct to make the indicated - // changes. - for( i=0; i< TACH_SEST_LEN; i++) - { - if( Exchanges->fcExchange[i].type // exchange defined? - && - (Exchanges->fcExchange[i].Cmnd == Cmnd) ) // matches? - - { - x_ID = i; // found exchange! - break; - } - } - if( x_ID == 0xFFFFFFFF) - { -// printk("cpqfcTS: ReportLuns failed - no FC Exchange\n"); - goto Done; // Report Luns FC Exchange gone; - // exchange probably Terminated by Implicit logout - } - - - // search linked list for the port_id we sent INQUIRY to - pLoggedInPort = fcFindLoggedInPort( fcChip, - NULL, // DON'T search Scsi Nexus (we will set it) - Exchanges->fcExchange[ x_ID].fchs.d_id & 0xFFFFFF, - NULL, // DON'T search linked list for FC WWN - NULL); // DON'T care about end of list - - if( !pLoggedInPort ) - { -// printk("cpqfcTS: ReportLuns failed - device gone\n"); - goto Done; // error! can't find logged in Port - } - LunListLen = ucBuff[3]; - LunListLen += ucBuff[2]>>8; - - if( !LunListLen ) // failed - { - // generically speaking, a soft error means we should retry... - if( (Cmnd->result >> 16) == DID_SOFT_ERROR ) - { - if( ((Cmnd->sense_buffer[2] & 0xF) == 0x6) && - (Cmnd->sense_buffer[12] == 0x29) ) // Sense Code "reset" - { - TachFCHDR_GCMND *fchs = &Exchanges->fcExchange[ x_ID].fchs; - // did we fail because of "check condition, device reset?" - // e.g. the device was reset (i.e., at every power up) - // retry the Report Luns - - // who are we sending it to? - // we know this because we have a copy of the command - // frame from the original Report Lun command - - // switch the d_id/s_id fields, because the Exchange Build - // context is "reply to source". - - fchs->s_id = fchs->d_id; // (temporarily re-use the struct) - cpqfcTSPutLinkQue( cpqfcHBAdata, SCSI_REPORT_LUNS, fchs ); - } - } - else // probably, the device doesn't support Report Luns - pLoggedInPort->ScsiNexus.VolumeSetAddressing = 0; - } - else // we have LUN info - check VSA mode - { - // for now, assume all LUNs will have same addr mode - // for VSA, payload byte 8 will be 0x40; otherwise, 0 - pLoggedInPort->ScsiNexus.VolumeSetAddressing = ucBuff[8]; - - // Since we got a Report Luns answer, set lun masking flag - pLoggedInPort->ScsiNexus.LunMasking = 1; - - if( LunListLen > 8*CPQFCTS_MAX_LUN) // We expect CPQFCTS_MAX_LUN max - LunListLen = 8*CPQFCTS_MAX_LUN; - -/* - printk("Device WWN %08X%08X Reports Luns @: ", - (ULONG)(pLoggedInPort->u.liWWN &0xFFFFFFFF), - (ULONG)(pLoggedInPort->u.liWWN>>32)); - - for( i=8; i<LunListLen+8; i+=8) - { - printk("%02X%02X ", ucBuff[i], ucBuff[i+1] ); - } - printk("\n"); -*/ - - // Since the device was kind enough to tell us where the - // LUNs are, lets ensure they are contiguous for Linux's - // SCSI driver scan, which expects them to start at 0. - // Since Linux only supports 8 LUNs, only copy the first - // eight from the report luns command - - // e.g., the Compaq RA4x00 f/w Rev 2.54 and above may report - // LUNs 4001, 4004, etc., because other LUNs are masked from - // this HBA (owned by someone else). We'll make those appear as - // LUN 0, 1... to Linux - { - int j; - int AppendLunList = 0; - // Walk through the LUN list. The 'j' array number is - // Linux's lun #, while the value of .lun[j] is the target's - // lun #. - // Once we build a LUN list, it's possible for a known device - // to go offline while volumes (LUNs) are added. Later, - // the device will do another PLOGI ... Report Luns command, - // and we must not alter the existing Linux Lun map. - // (This will be very rare). - for( j=0; j < CPQFCTS_MAX_LUN; j++) - { - if( pLoggedInPort->ScsiNexus.lun[j] != 0xFF ) - { - AppendLunList = 1; - break; - } - } - if( AppendLunList ) - { - int k; - int FreeLunIndex; -// printk("cpqfcTS: AppendLunList\n"); - - // If we get a new Report Luns, we cannot change - // any existing LUN mapping! (Only additive entry) - // For all LUNs in ReportLun list - // if RL lun != ScsiNexus lun - // if RL lun present in ScsiNexus lun[], continue - // else find ScsiNexus lun[]==FF and add, continue - - for( i=8, j=0; i<LunListLen+8 && j< CPQFCTS_MAX_LUN; i+=8, j++) - { - if( pLoggedInPort->ScsiNexus.lun[j] != ucBuff[i+1] ) - { - // something changed from the last Report Luns - printk(" cpqfcTS: Report Lun change!\n"); - for( k=0, FreeLunIndex=CPQFCTS_MAX_LUN; - k < CPQFCTS_MAX_LUN; k++) - { - if( pLoggedInPort->ScsiNexus.lun[k] == 0xFF) - { - FreeLunIndex = k; - break; - } - if( pLoggedInPort->ScsiNexus.lun[k] == ucBuff[i+1] ) - break; // we already masked this lun - } - if( k >= CPQFCTS_MAX_LUN ) - { - printk(" no room for new LUN %d\n", ucBuff[i+1]); - } - else if( k == FreeLunIndex ) // need to add LUN - { - pLoggedInPort->ScsiNexus.lun[k] = ucBuff[i+1]; -// printk("add [%d]->%02d\n", k, pLoggedInPort->ScsiNexus.lun[k]); - - } - else - { - // lun already known - } - break; - } - } - // print out the new list... - for( j=0; j< CPQFCTS_MAX_LUN; j++) - { - if( pLoggedInPort->ScsiNexus.lun[j] == 0xFF) - break; // done -// printk("[%d]->%02d ", j, pLoggedInPort->ScsiNexus.lun[j]); - } - } - else - { -// printk("Linux SCSI LUNs[] -> Device LUNs: "); - // first time - this is easy - for( i=8, j=0; i<LunListLen+8 && j< CPQFCTS_MAX_LUN; i+=8, j++) - { - pLoggedInPort->ScsiNexus.lun[j] = ucBuff[i+1]; -// printk("[%d]->%02d ", j, pLoggedInPort->ScsiNexus.lun[j]); - } -// printk("\n"); - } - } - } - -Done: ; -} - -extern int is_private_data_of_cpqfc(CPQFCHBA *hba, void * pointer); -extern void cpqfc_free_private_data(CPQFCHBA *hba, cpqfc_passthru_private_t *data); - -static void -call_scsi_done(Scsi_Cmnd *Cmnd) -{ - CPQFCHBA *hba; - hba = (CPQFCHBA *) Cmnd->device->host->hostdata; - // Was this command a cpqfc passthru ioctl ? - if (Cmnd->sc_request != NULL && Cmnd->device->host != NULL && - Cmnd->device->host->hostdata != NULL && - is_private_data_of_cpqfc((CPQFCHBA *) Cmnd->device->host->hostdata, - Cmnd->sc_request->upper_private_data)) { - cpqfc_free_private_data(hba, - Cmnd->sc_request->upper_private_data); - Cmnd->sc_request->upper_private_data = NULL; - Cmnd->result &= 0xff00ffff; - Cmnd->result |= (DID_PASSTHROUGH << 16); // prevents retry - } - if (Cmnd->scsi_done != NULL) - (*Cmnd->scsi_done)(Cmnd); -} - -// After successfully getting a "Process Login" (PRLI) from an -// FC port, we want to Discover the LUNs so that we know the -// addressing type (e.g., FCP-SCSI Volume Set Address, Peripheral -// Unit Device), and whether SSP (Selective Storage Presentation or -// Lun Masking) has made the LUN numbers non-zero based or -// non-contiguous. To remain backward compatible with the SCSI-2 -// driver model, which expects a contiguous LUNs starting at 0, -// will use the ReportLuns info to map from "device" to "Linux" -// LUNs. -static void IssueReportLunsCommand( - CPQFCHBA* cpqfcHBAdata, - TachFCHDR_GCMND* fchs) -{ - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - PFC_LOGGEDIN_PORT pLoggedInPort; - struct scsi_cmnd *Cmnd = NULL; - struct scsi_device *ScsiDev = NULL; - LONG x_ID; - ULONG ulStatus; - UCHAR *ucBuff; - - if( !cpqfcHBAdata->PortDiscDone) // cleared by LDn - { - printk("Discard Q'd ReportLun command\n"); - goto Done; - } - - // find the device (from port_id) we're talking to - pLoggedInPort = fcFindLoggedInPort( fcChip, - NULL, // DON'T search Scsi Nexus - fchs->s_id & 0xFFFFFF, - NULL, // DON'T search linked list for FC WWN - NULL); // DON'T care about end of list - if( pLoggedInPort ) // we'd BETTER find it! - { - - - if( !(pLoggedInPort->fcp_info & TARGET_FUNCTION) ) - goto Done; // forget it - FC device not a "target" - - - ScsiDev = scsi_get_host_dev (cpqfcHBAdata->HostAdapter); - if (!ScsiDev) - goto Done; - - Cmnd = scsi_get_command (ScsiDev, GFP_KERNEL); - if (!Cmnd) - goto Done; - - ucBuff = pLoggedInPort->ReportLunsPayload; - - memset( ucBuff, 0, REPORT_LUNS_PL); - - Cmnd->scsi_done = ScsiReportLunsDone; - - Cmnd->request_buffer = pLoggedInPort->ReportLunsPayload; - Cmnd->request_bufflen = REPORT_LUNS_PL; - - Cmnd->cmnd[0] = 0xA0; - Cmnd->cmnd[8] = REPORT_LUNS_PL >> 8; - Cmnd->cmnd[9] = (UCHAR)REPORT_LUNS_PL; - Cmnd->cmd_len = 12; - - Cmnd->device->channel = pLoggedInPort->ScsiNexus.channel; - Cmnd->device->id = pLoggedInPort->ScsiNexus.target; - - - ulStatus = cpqfcTSBuildExchange( - cpqfcHBAdata, - SCSI_IRE, - fchs, - Cmnd, // buffer for Report Lun data - &x_ID );// fcController->fcExchanges index, -1 if failed - - if( !ulStatus ) // Exchange setup? - { - ulStatus = cpqfcTSStartExchange( cpqfcHBAdata, x_ID ); - if( !ulStatus ) - { - // submitted to Tach's Outbound Que (ERQ PI incremented) - // waited for completion for ELS type (Login frames issued - // synchronously) - } - else - // check reason for Exchange not being started - we might - // want to Queue and start later, or fail with error - { - - } - } - - else // Xchange setup failed... - printk(" cpqfcTSBuildExchange failed: %Xh\n", ulStatus ); - } - else // like, we just got a PRLI ACC, and now the port is gone? - { - printk(" can't send ReportLuns - no login for port_id %Xh\n", - fchs->s_id & 0xFFFFFF); - } - - - -Done: - - if (Cmnd) - scsi_put_command (Cmnd); - if (ScsiDev) - scsi_free_host_dev (ScsiDev); -} - - - - - - - -static void CompleteBoardLockCmnd( CPQFCHBA *cpqfcHBAdata) -{ - int i; - for( i = CPQFCTS_REQ_QUEUE_LEN-1; i>= 0; i--) - { - if( cpqfcHBAdata->BoardLockCmnd[i] != NULL ) - { - Scsi_Cmnd *Cmnd = cpqfcHBAdata->BoardLockCmnd[i]; - cpqfcHBAdata->BoardLockCmnd[i] = NULL; - Cmnd->result = (DID_SOFT_ERROR << 16); // ask for retry -// printk(" BoardLockCmnd[%d] %p Complete, chnl/target/lun %d/%d/%d\n", -// i,Cmnd, Cmnd->channel, Cmnd->target, Cmnd->lun); - call_scsi_done(Cmnd); - } - } -} - - - - - - -// runs every 1 second for FC exchange timeouts and implicit FC device logouts - -void cpqfcTSheartbeat( unsigned long ptr ) -{ - CPQFCHBA *cpqfcHBAdata = (CPQFCHBA *)ptr; - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - FC_EXCHANGES *Exchanges = fcChip->Exchanges; - PFC_LOGGEDIN_PORT pLoggedInPort = &fcChip->fcPorts; - ULONG i; - unsigned long flags; - DECLARE_MUTEX_LOCKED(BoardLock); - - PCI_TRACE( 0xA8) - - if( cpqfcHBAdata->BoardLock) // Worker Task Running? - goto Skip; - - // STOP _que function - spin_lock_irqsave( cpqfcHBAdata->HostAdapter->host_lock, flags); - - PCI_TRACE( 0xA8) - - - cpqfcHBAdata->BoardLock = &BoardLock; // stop Linux SCSI command queuing - - // release the IO lock (and re-enable interrupts) - spin_unlock_irqrestore( cpqfcHBAdata->HostAdapter->host_lock, flags); - - // Ensure no contention from _quecommand or Worker process - CPQ_SPINLOCK_HBA( cpqfcHBAdata) - - PCI_TRACE( 0xA8) - - - disable_irq( cpqfcHBAdata->HostAdapter->irq); // our IRQ - - // Complete the "bad target" commands (normally only used during - // initialization, since we aren't supposed to call "scsi_done" - // inside the queuecommand() function). (this is overly contorted, - // scsi_done can be safely called from queuecommand for - // this bad target case. May want to simplify this later) - - for( i=0; i< CPQFCTS_MAX_TARGET_ID; i++) - { - if( cpqfcHBAdata->BadTargetCmnd[i] ) - { - Scsi_Cmnd *Cmnd = cpqfcHBAdata->BadTargetCmnd[i]; - cpqfcHBAdata->BadTargetCmnd[i] = NULL; - Cmnd->result = (DID_BAD_TARGET << 16); - call_scsi_done(Cmnd); - } - else - break; - } - - - // logged in ports -- re-login check (ports required to verify login with - // PDISC after LIP within 2 secs) - - // prevent contention - while( pLoggedInPort ) // for all ports which are expecting - // PDISC after the next LIP, check to see if - // time is up! - { - // Important: we only detect "timeout" condition on TRANSITION - // from non-zero to zero - if( pLoggedInPort->LOGO_timer ) // time-out "armed"? - { - if( !(--pLoggedInPort->LOGO_timer) ) // DEC from 1 to 0? - { - // LOGOUT time! Per PLDA, PDISC hasn't complete in 2 secs, so - // issue LOGO request and destroy all I/O with other FC port(s). - -/* - printk(" ~cpqfcTS heartbeat: LOGOut!~ "); - printk("Linux SCSI Chanl/Target %d/%d (port_id %06Xh) WWN %08X%08X\n", - pLoggedInPort->ScsiNexus.channel, - pLoggedInPort->ScsiNexus.target, - pLoggedInPort->port_id, - (ULONG)(pLoggedInPort->u.liWWN &0xFFFFFFFF), - (ULONG)(pLoggedInPort->u.liWWN>>32)); - -*/ - cpqfcTSImplicitLogout( cpqfcHBAdata, pLoggedInPort); - - } - // else simply decremented - maybe next time... - } - pLoggedInPort = pLoggedInPort->pNextPort; - } - - - - - - // ************ FC EXCHANGE TIMEOUT CHECK ************** - - for( i=0; i< TACH_MAX_XID; i++) - { - if( Exchanges->fcExchange[i].type ) // exchange defined? - { - - if( !Exchanges->fcExchange[i].timeOut ) // time expired - { - // Set Exchange timeout status - Exchanges->fcExchange[i].status |= FC2_TIMEOUT; - - if( i >= TACH_SEST_LEN ) // Link Service Exchange - { - cpqfcTSCompleteExchange( cpqfcHBAdata->PciDev, fcChip, i); // Don't "abort" LinkService - } - - else // SEST Exchange TO -- may post ABTS to Worker Thread Que - { - // (Make sure we don't keep timing it out; let other functions - // complete it or set the timeOut as needed) - Exchanges->fcExchange[i].timeOut = 30000; // seconds default - - if( Exchanges->fcExchange[i].type - & - (BLS_ABTS | BLS_ABTS_ACC ) ) - { - // For BLS_ABTS*, an upper level might still have - // an outstanding command waiting for low-level completion. - // Also, in the case of a WRITE, we MUST get confirmation - // of either ABTS ACC or RJT before re-using the Exchange. - // It's possible that the RAID cache algorithm can hang - // if we fail to complete a WRITE to a LBA, when a READ - // comes later to that same LBA. Therefore, we must - // ensure that the target verifies receipt of ABTS for - // the exchange - - printk("~TO Q'd ABTS (x_ID %Xh)~ ", i); -// TriggerHBA( fcChip->Registers.ReMapMemBase); - - // On timeout of a ABTS exchange, check to - // see if the FC device has a current valid login. - // If so, restart it. - pLoggedInPort = fcFindLoggedInPort( fcChip, - Exchanges->fcExchange[i].Cmnd, // find Scsi Nexus - 0, // DON'T search linked list for FC port id - NULL, // DON'T search linked list for FC WWN - NULL); // DON'T care about end of list - - // device exists? - if( pLoggedInPort ) // device exists? - { - if( pLoggedInPort->prli ) // logged in for FCP-SCSI? - { - // attempt to restart the ABTS - printk(" ~restarting ABTS~ "); - cpqfcTSStartExchange( cpqfcHBAdata, i ); - - } - } - } - else // not an ABTS - { - - // We expect the WorkerThread to change the xchng type to - // abort and set appropriate timeout. - cpqfcTSPutLinkQue( cpqfcHBAdata, BLS_ABTS, &i ); // timed-out - } - } - } - else // time not expired... - { - // decrement timeout: 1 or more seconds left - --Exchanges->fcExchange[i].timeOut; - } - } - } - - - enable_irq( cpqfcHBAdata->HostAdapter->irq); - - - CPQ_SPINUNLOCK_HBA( cpqfcHBAdata) - - cpqfcHBAdata->BoardLock = NULL; // Linux SCSI commands may be queued - - // Now, complete any Cmnd we Q'd up while BoardLock was held - - CompleteBoardLockCmnd( cpqfcHBAdata); - - - // restart the timer to run again (1 sec later) -Skip: - mod_timer( &cpqfcHBAdata->cpqfcTStimer, jiffies + HZ); - - PCI_TRACEO( i, 0xA8) - return; -} - - -// put valid FC-AL physical address in spec order -static const UCHAR valid_al_pa[]={ - 0xef, 0xe8, 0xe4, 0xe2, - 0xe1, 0xE0, 0xDC, 0xDA, - 0xD9, 0xD6, 0xD5, 0xD4, - 0xD3, 0xD2, 0xD1, 0xCe, - 0xCd, 0xCc, 0xCb, 0xCa, - 0xC9, 0xC7, 0xC6, 0xC5, - 0xC3, 0xBc, 0xBa, 0xB9, - 0xB6, 0xB5, 0xB4, 0xB3, - 0xB2, 0xB1, 0xae, 0xad, - 0xAc, 0xAb, 0xAa, 0xA9, - - 0xA7, 0xA6, 0xA5, 0xA3, - 0x9f, 0x9e, 0x9d, 0x9b, - 0x98, 0x97, 0x90, 0x8f, - 0x88, 0x84, 0x82, 0x81, - 0x80, 0x7c, 0x7a, 0x79, - 0x76, 0x75, 0x74, 0x73, - 0x72, 0x71, 0x6e, 0x6d, - 0x6c, 0x6b, 0x6a, 0x69, - 0x67, 0x66, 0x65, 0x63, - 0x5c, 0x5a, 0x59, 0x56, - - 0x55, 0x54, 0x53, 0x52, - 0x51, 0x4e, 0x4d, 0x4c, - 0x4b, 0x4a, 0x49, 0x47, - 0x46, 0x45, 0x43, 0x3c, - 0x3a, 0x39, 0x36, 0x35, - 0x34, 0x33, 0x32, 0x31, - 0x2e, 0x2d, 0x2c, 0x2b, - 0x2a, 0x29, 0x27, 0x26, - 0x25, 0x23, 0x1f, 0x1E, - 0x1d, 0x1b, 0x18, 0x17, - - 0x10, 0x0f, 8, 4, 2, 1 }; // ALPA 0 (Fabric) is special case - -const int number_of_al_pa = (sizeof(valid_al_pa) ); - - - -// this function looks up an al_pa from the table of valid al_pa's -// we decrement from the last decimal loop ID, because soft al_pa -// (our typical case) are assigned with highest priority (and high al_pa) -// first. See "In-Depth FC-AL", R. Kembel pg. 38 -// INPUTS: -// al_pa - 24 bit port identifier (8 bit al_pa on private loop) -// RETURN: -// Loop ID - serves are index to array of logged in ports -// -1 - invalid al_pa (not all 8 bit values are legal) - -#if (0) -static int GetLoopID( ULONG al_pa ) -{ - int i; - - for( i = number_of_al_pa -1; i >= 0; i--) // dec. - { - if( valid_al_pa[i] == (UCHAR)al_pa ) // take lowest 8 bits - return i; // success - found valid al_pa; return decimal LoopID - } - return -1; // failed - not found -} -#endif - -extern cpqfc_passthru_private_t *cpqfc_private(Scsi_Request *sr); - -// Search the singly (forward) linked list "fcPorts" looking for -// either the SCSI target (if != -1), port_id (if not NULL), -// or WWN (if not null), in that specific order. -// If we find a SCSI nexus (from Cmnd arg), set the SCp.phase -// field according to VSA or PDU -// RETURNS: -// Ptr to logged in port struct if found -// (NULL if not found) -// pLastLoggedInPort - ptr to last struct (for adding new ones) -// -PFC_LOGGEDIN_PORT fcFindLoggedInPort( - PTACHYON fcChip, - Scsi_Cmnd *Cmnd, // search linked list for Scsi Nexus (channel/target/lun) - ULONG port_id, // search linked list for al_pa, or - UCHAR wwn[8], // search linked list for WWN, or... - PFC_LOGGEDIN_PORT *pLastLoggedInPort ) - -{ - PFC_LOGGEDIN_PORT pLoggedInPort = &fcChip->fcPorts; - BOOLEAN target_id_valid=FALSE; - BOOLEAN port_id_valid=FALSE; - BOOLEAN wwn_valid=FALSE; - int i; - - - if( Cmnd != NULL ) - target_id_valid = TRUE; - - else if( port_id ) // note! 24-bit NULL address is illegal - port_id_valid = TRUE; - - else - { - if( wwn ) // non-null arg? (OK to pass NULL when not searching WWN) - { - for( i=0; i<8; i++) // valid WWN passed? NULL WWN invalid - { - if( wwn[i] != 0 ) - wwn_valid = TRUE; // any non-zero byte makes (presumably) valid - } - } - } - // check other options ... - - - // In case multiple search options are given, we use a priority - // scheme: - // While valid pLoggedIn Ptr - // If port_id is valid - // if port_id matches, return Ptr - // If wwn is valid - // if wwn matches, return Ptr - // Next Ptr in list - // - // Return NULL (not found) - - - while( pLoggedInPort ) // NULL marks end of list (1st ptr always valid) - { - if( pLastLoggedInPort ) // caller's pointer valid? - *pLastLoggedInPort = pLoggedInPort; // end of linked list - - if( target_id_valid ) - { - // check Linux Scsi Cmnd for channel/target Nexus match - // (all luns are accessed through matching "pLoggedInPort") - if( (pLoggedInPort->ScsiNexus.target == Cmnd->device->id) - && - (pLoggedInPort->ScsiNexus.channel == Cmnd->device->channel)) - { - // For "passthru" modes, the IOCTL caller is responsible - // for setting the FCP-LUN addressing - if (Cmnd->sc_request != NULL && Cmnd->device->host != NULL && - Cmnd->device->host->hostdata != NULL && - is_private_data_of_cpqfc((CPQFCHBA *) Cmnd->device->host->hostdata, - Cmnd->sc_request->upper_private_data)) { - /* This is a passthru... */ - cpqfc_passthru_private_t *pd; - pd = Cmnd->sc_request->upper_private_data; - Cmnd->SCp.phase = pd->bus; - // Cmnd->SCp.have_data_in = pd->pdrive; - Cmnd->SCp.have_data_in = Cmnd->device->lun; - } else { - /* This is not a passthru... */ - - // set the FCP-LUN addressing type - Cmnd->SCp.phase = pLoggedInPort->ScsiNexus.VolumeSetAddressing; - - // set the Device Type we got from the snooped INQUIRY string - Cmnd->SCp.Message = pLoggedInPort->ScsiNexus.InqDeviceType; - - // handle LUN masking; if not "default" (illegal) lun value, - // the use it. These lun values are set by a successful - // Report Luns command - if( pLoggedInPort->ScsiNexus.LunMasking == 1) - { - if (Cmnd->device->lun > sizeof(pLoggedInPort->ScsiNexus.lun)) - return NULL; - // we KNOW all the valid LUNs... 0xFF is invalid! - Cmnd->SCp.have_data_in = pLoggedInPort->ScsiNexus.lun[Cmnd->device->lun]; - if (pLoggedInPort->ScsiNexus.lun[Cmnd->device->lun] == 0xFF) - return NULL; - // printk("xlating lun %d to 0x%02x\n", Cmnd->lun, - // pLoggedInPort->ScsiNexus.lun[Cmnd->lun]); - } - else - Cmnd->SCp.have_data_in = Cmnd->device->lun; // Linux & target luns match - } - break; // found it! - } - } - - if( port_id_valid ) // look for alpa first - { - if( pLoggedInPort->port_id == port_id ) - break; // found it! - } - if( wwn_valid ) // look for wwn second - { - - if( !memcmp( &pLoggedInPort->u.ucWWN[0], &wwn[0], 8)) - { - // all 8 bytes of WWN match - break; // found it! - } - } - - pLoggedInPort = pLoggedInPort->pNextPort; // try next port - } - - return pLoggedInPort; -} - - - - -// -// We need to examine the SEST table and re-validate -// any open Exchanges for this LoggedInPort -// To make Tachyon pay attention, Freeze FCP assists, -// set VAL bits, Unfreeze FCP assists -static void RevalidateSEST( struct Scsi_Host *HostAdapter, - PFC_LOGGEDIN_PORT pLoggedInPort) -{ - CPQFCHBA *cpqfcHBAdata = (CPQFCHBA *)HostAdapter->hostdata; - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - FC_EXCHANGES *Exchanges = fcChip->Exchanges; - ULONG x_ID; - BOOLEAN TachFroze = FALSE; - - - // re-validate any SEST exchanges that are permitted - // to survive the link down (e.g., good PDISC performed) - for( x_ID = 0; x_ID < TACH_SEST_LEN; x_ID++) - { - - // If the SEST entry port_id matches the pLoggedInPort, - // we need to re-validate - if( (Exchanges->fcExchange[ x_ID].type == SCSI_IRE) - || - (Exchanges->fcExchange[ x_ID].type == SCSI_IWE)) - { - - if( (Exchanges->fcExchange[ x_ID].fchs.d_id & 0xFFFFFF) // (24-bit port ID) - == pLoggedInPort->port_id) - { -// printk(" re-val xID %Xh ", x_ID); - if( !TachFroze ) // freeze if not already frozen - TachFroze |= FreezeTach( cpqfcHBAdata); - fcChip->SEST->u[ x_ID].IWE.Hdr_Len |= 0x80000000; // set VAL bit - } - } - } - - if( TachFroze) - { - fcChip->UnFreezeTachyon( fcChip, 2); // both ERQ and FCP assists - } -} - - -// Complete an Linux Cmnds that we Queued because -// our FC link was down (cause immediate retry) - -static void UnblockScsiDevice( struct Scsi_Host *HostAdapter, - PFC_LOGGEDIN_PORT pLoggedInPort) -{ - CPQFCHBA *cpqfcHBAdata = (CPQFCHBA *)HostAdapter->hostdata; - Scsi_Cmnd* *SCptr = &cpqfcHBAdata->LinkDnCmnd[0]; - Scsi_Cmnd *Cmnd; - int indx; - - - - // if the device was previously "blocked", make sure - // we unblock it so Linux SCSI will resume - - pLoggedInPort->device_blocked = FALSE; // clear our flag - - // check the Link Down command ptr buffer; - // we can complete now causing immediate retry - for( indx=0; indx < CPQFCTS_REQ_QUEUE_LEN; indx++, SCptr++) - { - if( *SCptr != NULL ) // scsi command to complete? - { -#ifdef DUMMYCMND_DBG - printk("complete Cmnd %p in LinkDnCmnd[%d]\n", *SCptr,indx); -#endif - Cmnd = *SCptr; - - - // Are there any Q'd commands for this target? - if( (Cmnd->device->id == pLoggedInPort->ScsiNexus.target) - && - (Cmnd->device->channel == pLoggedInPort->ScsiNexus.channel) ) - { - Cmnd->result = (DID_SOFT_ERROR <<16); // force retry - if( Cmnd->scsi_done == NULL) - { - printk("LinkDnCmnd scsi_done ptr null, port_id %Xh\n", - pLoggedInPort->port_id); - } - else - call_scsi_done(Cmnd); - *SCptr = NULL; // free this slot for next use - } - } - } -} - - -//#define WWN_DBG 1 - -static void SetLoginFields( - PFC_LOGGEDIN_PORT pLoggedInPort, - TachFCHDR_GCMND* fchs, - BOOLEAN PDisc, - BOOLEAN Originator) -{ - LOGIN_PAYLOAD logi; // FC-PH Port Login - PRLI_REQUEST prli; // copy for BIG ENDIAN switch - int i; -#ifdef WWN_DBG - ULONG ulBuff; -#endif - - BigEndianSwap( (UCHAR*)&fchs->pl[0], (UCHAR*)&logi, sizeof(logi)); - - pLoggedInPort->Originator = Originator; - pLoggedInPort->port_id = fchs->s_id & 0xFFFFFF; - - switch( fchs->pl[0] & 0xffff ) - { - case 0x00000002: // PLOGI or PDISC ACCept? - if( PDisc ) // PDISC accept - goto PDISC_case; - - case 0x00000003: // ELS_PLOGI or ELS_PLOGI_ACC - - // Login BB_credit typically 0 for Tachyons - pLoggedInPort->BB_credit = logi.cmn_services.bb_credit; - - // e.g. 128, 256, 1024, 2048 per FC-PH spec - // We have to use this when setting up SEST Writes, - // since that determines frame size we send. - pLoggedInPort->rx_data_size = logi.class3.rx_data_size; - pLoggedInPort->plogi = TRUE; - pLoggedInPort->pdisc = FALSE; - pLoggedInPort->prli = FALSE; // ELS_PLOGI resets - pLoggedInPort->flogi = FALSE; // ELS_PLOGI resets - pLoggedInPort->logo = FALSE; // ELS_PLOGI resets - pLoggedInPort->LOGO_counter = 0;// ELS_PLOGI resets - pLoggedInPort->LOGO_timer = 0;// ELS_PLOGI resets - - // was this PLOGI to a Fabric? - if( pLoggedInPort->port_id == 0xFFFFFC ) // well know address - pLoggedInPort->flogi = TRUE; - - - for( i=0; i<8; i++) // copy the LOGIN port's WWN - pLoggedInPort->u.ucWWN[i] = logi.port_name[i]; - -#ifdef WWN_DBG - ulBuff = (ULONG)pLoggedInPort->u.liWWN; - if( pLoggedInPort->Originator) - printk("o"); - else - printk("r"); - printk("PLOGI port_id %Xh, WWN %08X", - pLoggedInPort->port_id, ulBuff); - - ulBuff = (ULONG)(pLoggedInPort->u.liWWN >> 32); - printk("%08Xh fcPort %p\n", ulBuff, pLoggedInPort); -#endif - break; - - - - - case 0x00000005: // ELS_LOGO (logout) - - - pLoggedInPort->plogi = FALSE; - pLoggedInPort->pdisc = FALSE; - pLoggedInPort->prli = FALSE; // ELS_PLOGI resets - pLoggedInPort->flogi = FALSE; // ELS_PLOGI resets - pLoggedInPort->logo = TRUE; // ELS_PLOGI resets - pLoggedInPort->LOGO_counter++; // ELS_PLOGI resets - pLoggedInPort->LOGO_timer = 0; -#ifdef WWN_DBG - ulBuff = (ULONG)pLoggedInPort->u.liWWN; - if( pLoggedInPort->Originator) - printk("o"); - else - printk("r"); - printk("LOGO port_id %Xh, WWN %08X", - pLoggedInPort->port_id, ulBuff); - - ulBuff = (ULONG)(pLoggedInPort->u.liWWN >> 32); - printk("%08Xh\n", ulBuff); -#endif - break; - - - -PDISC_case: - case 0x00000050: // ELS_PDISC or ELS_PDISC_ACC - pLoggedInPort->LOGO_timer = 0; // stop the time-out - - pLoggedInPort->prli = TRUE; // ready to accept FCP-SCSI I/O - - - -#ifdef WWN_DBG - ulBuff = (ULONG)pLoggedInPort->u.liWWN; - if( pLoggedInPort->Originator) - printk("o"); - else - printk("r"); - printk("PDISC port_id %Xh, WWN %08X", - pLoggedInPort->port_id, ulBuff); - - ulBuff = (ULONG)(pLoggedInPort->u.liWWN >> 32); - printk("%08Xh\n", ulBuff); -#endif - - - - break; - - - - case 0x1020L: // PRLI? - case 0x1002L: // PRLI ACCept? - BigEndianSwap( (UCHAR*)&fchs->pl[0], (UCHAR*)&prli, sizeof(prli)); - - pLoggedInPort->fcp_info = prli.fcp_info; // target/initiator flags - pLoggedInPort->prli = TRUE; // PLOGI resets, PDISC doesn't - - pLoggedInPort->pdisc = TRUE; // expect to send (or receive) PDISC - // next time - pLoggedInPort->LOGO_timer = 0; // will be set next LinkDown -#ifdef WWN_DBG - ulBuff = (ULONG)pLoggedInPort->u.liWWN; - if( pLoggedInPort->Originator) - printk("o"); - else - printk("r"); - printk("PRLI port_id %Xh, WWN %08X", - pLoggedInPort->port_id, ulBuff); - - ulBuff = (ULONG)(pLoggedInPort->u.liWWN >> 32); - printk("%08Xh\n", ulBuff); -#endif - - break; - - } - - return; -} - - - - - - -static void BuildLinkServicePayload( PTACHYON fcChip, ULONG type, void* payload) -{ - LOGIN_PAYLOAD *plogi; // FC-PH Port Login - LOGIN_PAYLOAD PlogiPayload; // copy for BIG ENDIAN switch - PRLI_REQUEST *prli; // FCP-SCSI Process Login - PRLI_REQUEST PrliPayload; // copy for BIG ENDIAN switch - LOGOUT_PAYLOAD *logo; - LOGOUT_PAYLOAD LogoutPayload; -// PRLO_REQUEST *prlo; -// PRLO_REQUEST PrloPayload; - REJECT_MESSAGE rjt, *prjt; - - memset( &PlogiPayload, 0, sizeof( PlogiPayload)); - plogi = &PlogiPayload; // load into stack buffer, - // then BIG-ENDIAN switch a copy to caller - - - switch( type ) // payload type can be ELS_PLOGI, ELS_PRLI, ADISC, ... - { - case ELS_FDISC: - case ELS_FLOGI: - case ELS_PLOGI_ACC: // FC-PH PORT Login Accept - case ELS_PLOGI: // FC-PH PORT Login - case ELS_PDISC: // FC-PH2 Port Discovery - same payload as ELS_PLOGI - plogi->login_cmd = LS_PLOGI; - if( type == ELS_PDISC) - plogi->login_cmd = LS_PDISC; - else if( type == ELS_PLOGI_ACC ) - plogi->login_cmd = LS_ACC; - - plogi->cmn_services.bb_credit = 0x00; - plogi->cmn_services.lowest_ver = fcChip->lowest_FCPH_ver; - plogi->cmn_services.highest_ver = fcChip->highest_FCPH_ver; - plogi->cmn_services.bb_rx_size = TACHLITE_TS_RX_SIZE; - plogi->cmn_services.common_features = CONTINUOSLY_INCREASING | - RANDOM_RELATIVE_OFFSET; - - // fill in with World Wide Name based Port Name - 8 UCHARs - // get from Tach registers WWN hi & lo - LoadWWN( fcChip, plogi->port_name, 0); - // fill in with World Wide Name based Node/Fabric Name - 8 UCHARs - // get from Tach registers WWN hi & lo - LoadWWN( fcChip, plogi->node_name, 1); - - // For Seagate Drives. - // - plogi->cmn_services.common_features |= 0x800; - plogi->cmn_services.rel_offset = 0xFE; - plogi->cmn_services.concurrent_seq = 1; - plogi->class1.service_options = 0x00; - plogi->class2.service_options = 0x00; - plogi->class3.service_options = CLASS_VALID; - plogi->class3.initiator_control = 0x00; - plogi->class3.rx_data_size = MAX_RX_PAYLOAD; - plogi->class3.recipient_control = - ERROR_DISCARD | ONE_CATEGORY_SEQUENCE; - plogi->class3.concurrent_sequences = 1; - plogi->class3.open_sequences = 1; - plogi->vendor_id[0] = 'C'; plogi->vendor_id[1] = 'Q'; - plogi->vendor_version[0] = 'C'; plogi->vendor_version[1] = 'Q'; - plogi->vendor_version[2] = ' '; plogi->vendor_version[3] = '0'; - plogi->vendor_version[4] = '0'; plogi->vendor_version[5] = '0'; - - - // FLOGI specific fields... (see FC-FLA, Rev 2.7, Aug 1999, sec 5.1) - if( (type == ELS_FLOGI) || (type == ELS_FDISC) ) - { - if( type == ELS_FLOGI ) - plogi->login_cmd = LS_FLOGI; - else - plogi->login_cmd = LS_FDISC; - - plogi->cmn_services.lowest_ver = 0x20; - plogi->cmn_services.common_features = 0x0800; - plogi->cmn_services.rel_offset = 0; - plogi->cmn_services.concurrent_seq = 0; - - plogi->class3.service_options = 0x8800; - plogi->class3.rx_data_size = 0; - plogi->class3.recipient_control = 0; - plogi->class3.concurrent_sequences = 0; - plogi->class3.open_sequences = 0; - } - - // copy back to caller's buff, w/ BIG ENDIAN swap - BigEndianSwap( (UCHAR*)&PlogiPayload, payload, sizeof(PlogiPayload)); - break; - - - case ELS_ACC: // generic Extended Link Service ACCept - plogi->login_cmd = LS_ACC; - // copy back to caller's buff, w/ BIG ENDIAN swap - BigEndianSwap( (UCHAR*)&PlogiPayload, payload, 4); - break; - - - - case ELS_SCR: // Fabric State Change Registration - { - SCR_PL scr; // state change registration - - memset( &scr, 0, sizeof(scr)); - - scr.command = LS_SCR; // 0x62000000 - // see FC-FLA, Rev 2.7, Table A.22 (pg 82) - scr.function = 3; // 1 = Events detected by Fabric - // 2 = N_Port detected registration - // 3 = Full registration - - // copy back to caller's buff, w/ BIG ENDIAN swap - BigEndianSwap( (UCHAR*)&scr, payload, sizeof(SCR_PL)); - } - - break; - - - case FCS_NSR: // Fabric Name Service Request - { - NSR_PL nsr; // Name Server Req. payload - - memset( &nsr, 0, sizeof(NSR_PL)); - - // see Brocade Fabric Programming Guide, - // Rev 1.3, pg 4-44 - nsr.CT_Rev = 0x01000000; - nsr.FCS_Type = 0xFC020000; - nsr.Command_code = 0x01710000; - nsr.FCP = 8; - - // copy back to caller's buff, w/ BIG ENDIAN swap - BigEndianSwap( (UCHAR*)&nsr, payload, sizeof(NSR_PL)); - } - - break; - - - - - case ELS_LOGO: // FC-PH PORT LogOut - logo = &LogoutPayload; // load into stack buffer, - // then BIG-ENDIAN switch a copy to caller - logo->cmd = LS_LOGO; - // load the 3 UCHARs of the node name - // (if private loop, upper two UCHARs 0) - logo->reserved = 0; - - logo->n_port_identifier[0] = (UCHAR)(fcChip->Registers.my_al_pa); - logo->n_port_identifier[1] = - (UCHAR)(fcChip->Registers.my_al_pa>>8); - logo->n_port_identifier[2] = - (UCHAR)(fcChip->Registers.my_al_pa>>16); - // fill in with World Wide Name based Port Name - 8 UCHARs - // get from Tach registers WWN hi & lo - LoadWWN( fcChip, logo->port_name, 0); - - BigEndianSwap( (UCHAR*)&LogoutPayload, - payload, sizeof(LogoutPayload) ); // 16 UCHAR struct - break; - - - case ELS_LOGO_ACC: // Logout Accept (FH-PH pg 149, table 74) - logo = &LogoutPayload; // load into stack buffer, - // then BIG-ENDIAN switch a copy to caller - logo->cmd = LS_ACC; - BigEndianSwap( (UCHAR*)&LogoutPayload, payload, 4 ); // 4 UCHAR cmnd - break; - - - case ELS_RJT: // ELS_RJT link service reject (FH-PH pg 155) - - prjt = (REJECT_MESSAGE*)payload; // pick up passed data - rjt.command_code = ELS_RJT; - // reverse fields, because of Swap that follows... - rjt.vendor = prjt->reserved; // vendor specific - rjt.explain = prjt->reason; // - rjt.reason = prjt->explain; // - rjt.reserved = prjt->vendor; // - // BIG-ENDIAN switch a copy to caller - BigEndianSwap( (UCHAR*)&rjt, payload, 8 ); // 8 UCHAR cmnd - break; - - - - - - case ELS_PRLI_ACC: // Process Login ACCept - case ELS_PRLI: // Process Login - case ELS_PRLO: // Process Logout - memset( &PrliPayload, 0, sizeof( PrliPayload)); - prli = &PrliPayload; // load into stack buffer, - - if( type == ELS_PRLI ) - prli->cmd = 0x20; // Login - else if( type == ELS_PRLO ) - prli->cmd = 0x21; // Logout - else if( type == ELS_PRLI_ACC ) - { - prli->cmd = 0x02; // Login ACCept - prli->valid = REQUEST_EXECUTED; - } - - - prli->valid |= SCSI_FCP | ESTABLISH_PAIR; - prli->fcp_info = READ_XFER_RDY; - prli->page_length = 0x10; - prli->payload_length = 20; - // Can be initiator AND target - - if( fcChip->Options.initiator ) - prli->fcp_info |= INITIATOR_FUNCTION; - if( fcChip->Options.target ) - prli->fcp_info |= TARGET_FUNCTION; - - BigEndianSwap( (UCHAR*)&PrliPayload, payload, prli->payload_length); - break; - - - - default: // no can do - programming error - printk(" BuildLinkServicePayload unknown!\n"); - break; - } -} - -// loads 8 UCHARs for PORT name or NODE name base on -// controller's WWN. -void LoadWWN( PTACHYON fcChip, UCHAR* dest, UCHAR type) -{ - UCHAR* bPtr, i; - - switch( type ) - { - case 0: // Port_Name - bPtr = (UCHAR*)&fcChip->Registers.wwn_hi; - for( i =0; i<4; i++) - dest[i] = *bPtr++; - bPtr = (UCHAR*)&fcChip->Registers.wwn_lo; - for( i =4; i<8; i++) - dest[i] = *bPtr++; - break; - case 1: // Node/Fabric _Name - bPtr = (UCHAR*)&fcChip->Registers.wwn_hi; - for( i =0; i<4; i++) - dest[i] = *bPtr++; - bPtr = (UCHAR*)&fcChip->Registers.wwn_lo; - for( i =4; i<8; i++) - dest[i] = *bPtr++; - break; - } - -} - - - -// We check the Port Login payload for required values. Note that -// ELS_PLOGI and ELS_PDISC (Port DISCover) use the same payload. - - -int verify_PLOGI( PTACHYON fcChip, - TachFCHDR_GCMND* fchs, - ULONG* reject_explain) -{ - LOGIN_PAYLOAD login; - - // source, dest, len (should be mult. of 4) - BigEndianSwap( (UCHAR*)&fchs->pl[0], (UCHAR*)&login, sizeof(login)); - - // check FC version - // if other port's highest supported version - // is less than our lowest, and - // if other port's lowest - if( login.cmn_services.highest_ver < fcChip->lowest_FCPH_ver || - login.cmn_services.lowest_ver > fcChip->highest_FCPH_ver ) - { - *reject_explain = LS_RJT_REASON( LOGICAL_ERROR, OPTIONS_ERROR); - return LOGICAL_ERROR; - } - - // Receive Data Field Size must be >=128 - // per FC-PH - if (login.cmn_services.bb_rx_size < 128) - { - *reject_explain = LS_RJT_REASON( LOGICAL_ERROR, DATA_FIELD_SIZE_ERROR); - return LOGICAL_ERROR; - } - - // Only check Class 3 params - if( login.class3.service_options & CLASS_VALID) - { - if (login.class3.rx_data_size < 128) - { - *reject_explain = LS_RJT_REASON( LOGICAL_ERROR, INVALID_CSP); - return LOGICAL_ERROR; - } - if( login.class3.initiator_control & XID_REQUIRED) - { - *reject_explain = LS_RJT_REASON( LOGICAL_ERROR, INITIATOR_CTL_ERROR); - return LOGICAL_ERROR; - } - } - return 0; // success -} - - - - -int verify_PRLI( TachFCHDR_GCMND* fchs, ULONG* reject_explain) -{ - PRLI_REQUEST prli; // buffer for BIG ENDIAN - - // source, dest, len (should be mult. of 4) - BigEndianSwap( (UCHAR*)&fchs->pl[0], (UCHAR*)&prli, sizeof(prli)); - - if( prli.fcp_info == 0 ) // i.e., not target or initiator? - { - *reject_explain = LS_RJT_REASON( LOGICAL_ERROR, OPTIONS_ERROR); - return LOGICAL_ERROR; - } - - return 0; // success -} - - -// SWAP UCHARs as required by Fibre Channel (i.e. BIG ENDIAN) -// INPUTS: -// source - ptr to LITTLE ENDIAN ULONGS -// cnt - number of UCHARs to switch (should be mult. of ULONG) -// OUTPUTS: -// dest - ptr to BIG ENDIAN copy -// RETURN: -// none -// -void BigEndianSwap( UCHAR *source, UCHAR *dest, USHORT cnt) -{ - int i,j; - - source+=3; // start at MSB of 1st ULONG - for( j=0; j < cnt; j+=4, source+=4, dest+=4) // every ULONG - { - for( i=0; i<4; i++) // every UCHAR in ULONG - *(dest+i) = *(source-i); - } -} - - - - -// Build FC Exchanges............ - -static void buildFCPstatus( - PTACHYON fcChip, - ULONG ExchangeID); - -static LONG FindFreeExchange( PTACHYON fcChip, ULONG type ); - -static ULONG build_SEST_sgList( - struct pci_dev *pcidev, - ULONG *SESTalPairStart, - Scsi_Cmnd *Cmnd, - ULONG *sgPairs, - PSGPAGES *sgPages_head // link list of TL Ext. S/G pages from O/S Pool -); - -static int build_FCP_payload( Scsi_Cmnd *Cmnd, - UCHAR* payload, ULONG type, ULONG fcp_dl ); - - -/* - IRB - ERQ __________________ - | | / | Req_A_SFS_Len | ____________________ - |----------| / | Req_A_SFS_Addr |------->| Reserved | - | IRB | / | Req_A_D_ID | | SOF EOF TimeStamp | - |-----------/ | Req_A_SEST_Index |-+ | R_CTL | D_ID | - | IRB | | Req_B... | | | CS_CTL| S_ID | - |-----------\ | | | | TYPE | F_CTL | - | IRB | \ | | | | SEQ_ID | SEQ_CNT | - |----------- \ | | +-->+--| OX_ID | RX_ID | - | | \ |__________________| | | RO | - | | pl (payload/cmnd) | - | | ..... | - | |___________________| - | - | -+-------------------------------------------+ -| -| -| e.g. IWE -| SEST __________________ for FCP_DATA -| | | / | | Hdr_Len | ____________________ -| |----------| / | Hdr_Addr_Addr |------->| Reserved | -| | [0] | / |Remote_ID| RSP_Len| | SOF EOF TimeStamp | -| |-----------/ | RSP_Addr |---+ | R_CTL | D_ID | -+-> [1] | | | Buff_Off | | | CS_CTL| S_ID | - |-----------\ |BuffIndex| Link | | | TYPE | F_CTL | - | [2] | \ | Rsvd | RX_ID | | | SEQ_ID | SEQ_CNT | - |----------- \ | Data_Len | | | OX_ID | RX_ID | - | ... | \ | Exp_RO | | | RO | - |----------| | Exp_Byte_Cnt | | |___________________| - | SEST_LEN | +--| Len | | - |__________| | | Address | | - | | ... | | for FCP_RSP - | |__________________| | ____________________ - | +----| Reserved | - | | SOF EOF TimeStamp | - | | R_CTL | D_ID | - | | CS_CTL| S_ID | - +--- local or extended | .... | - scatter/gather lists - defining upper-layer - data (e.g. from user's App) - - -*/ -// All TachLite commands must start with a SFS (Single Frame Sequence) -// command. In the simplest case (a NOP Basic Link command), -// only one frame header and ERQ entry is required. The most complex -// case is the SCSI assisted command, which requires an ERQ entry, -// SEST entry, and several frame headers and data buffers all -// logically linked together. -// Inputs: -// cpqfcHBAdata - controller struct -// type - PLOGI, SCSI_IWE, etc. -// InFCHS - Incoming Tachlite FCHS which prompted this exchange -// (only s_id set if we are originating) -// Data - PVOID to data struct consistent with "type" -// fcExchangeIndex - pointer to OX/RD ID value of built exchange -// Return: -// fcExchangeIndex - OX/RD ID value if successful -// 0 - success -// INVALID_ARGS - NULL/ invalid passed args -// BAD_ALPA - Bad source al_pa address -// LNKDWN_OSLS - Link Down (according to this controller) -// OUTQUE_FULL - Outbound Que full -// DRIVERQ_FULL - controller's Exchange array full -// SEST_FULL - SEST table full -// -// Remarks: -// Psuedo code: -// Check for NULL pointers / bad args -// Build outgoing FCHS - the header/payload struct -// Build IRB (for ERQ entry) -// if SCSI command, build SEST entry (e.g. IWE, TRE,...) -// return success - -//sbuildex -ULONG cpqfcTSBuildExchange( - CPQFCHBA *cpqfcHBAdata, - ULONG type, // e.g. PLOGI - TachFCHDR_GCMND* InFCHS, // incoming FCHS - void *Data, // the CDB, scatter/gather, etc. - LONG *fcExchangeIndex ) // points to allocated exchange, -{ - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - FC_EXCHANGES *Exchanges = fcChip->Exchanges; - ULONG ulStatus = 0; // assume OK - USHORT ox_ID, rx_ID=0xFFFF; - ULONG SfsLen=0L; - TachLiteIRB* pIRB; - IRBflags IRB_flags; - UCHAR *pIRB_flags = (UCHAR*)&IRB_flags; - TachFCHDR_GCMND* CMDfchs; - TachFCHDR* dataHDR; // 32 byte HEADER ONLY FCP-DATA buffer - TachFCHDR_RSP* rspHDR; // 32 byte header + RSP payload - Scsi_Cmnd *Cmnd = (Scsi_Cmnd*)Data; // Linux Scsi CDB, S/G, ... - TachLiteIWE* pIWE; - TachLiteIRE* pIRE; - TachLiteTWE* pTWE; - TachLiteTRE* pTRE; - ULONG fcp_dl; // total byte length of DATA transferred - ULONG fl; // frame length (FC frame size, 128, 256, 512, 1024) - ULONG sgPairs; // number of valid scatter/gather pairs - int FCP_SCSI_command; - BA_ACC_PAYLOAD *ba_acc; - BA_RJT_PAYLOAD *ba_rjt; - - // check passed ARGS - if( !fcChip->ERQ ) // NULL ptr means uninitialized Tachlite chip - return INVALID_ARGS; - - - if( type == SCSI_IRE || - type == SCSI_TRE || - type == SCSI_IWE || - type == SCSI_TWE) - FCP_SCSI_command = 1; - - else - FCP_SCSI_command = 0; - - - // for commands that pass payload data (e.g. SCSI write) - // examine command struct - verify that the - // length of s/g buffers is adequate for total payload - // length (end of list is NULL address) - - if( FCP_SCSI_command ) - { - if( Data ) // must have data descriptor (S/G list -- at least - // one address with at least 1 byte of data) - { - // something to do (later)? - } - - else - return INVALID_ARGS; // invalid DATA ptr - } - - - - // we can build an Exchange for later Queuing (on the TL chip) - // if an empty slot is available in the DevExt for this controller - // look for available Exchange slot... - - if( type != FCP_RESPONSE && - type != BLS_ABTS && - type != BLS_ABTS_ACC ) // already have Exchange slot! - *fcExchangeIndex = FindFreeExchange( fcChip, type ); - - if( *fcExchangeIndex != -1 ) // Exchange is available? - { - // assign tmp ptr (shorthand) - CMDfchs = &Exchanges->fcExchange[ *fcExchangeIndex].fchs; - - if( Cmnd != NULL ) // (necessary for ABTS cases) - { - Exchanges->fcExchange[ *fcExchangeIndex].Cmnd = Cmnd; // Linux Scsi - Exchanges->fcExchange[ *fcExchangeIndex].pLoggedInPort = - fcFindLoggedInPort( fcChip, - Exchanges->fcExchange[ *fcExchangeIndex].Cmnd, // find Scsi Nexus - 0, // DON'T search linked list for FC port id - NULL, // DON'T search linked list for FC WWN - NULL); // DON'T care about end of list - - } - - - // Build the command frame header (& data) according - // to command type - - // fields common for all SFS frame types - CMDfchs->reserved = 0L; // must clear - CMDfchs->sof_eof = 0x75000000L; // SOFi3:EOFn no UAM; LCr=0, no TS - - // get the destination port_id from incoming FCHS - // (initialized before calling if we're Originator) - // Frame goes to port it was from - the source_id - - CMDfchs->d_id = InFCHS->s_id &0xFFFFFF; // destination (add R_CTL later) - CMDfchs->s_id = fcChip->Registers.my_al_pa; // CS_CTL = 0 - - - // now enter command-specific fields - switch( type ) - { - - case BLS_NOP: // FC defined basic link service command NO-OP - // ensure unique X_IDs! (use tracking function) - - *pIRB_flags = 0; // clear IRB flags - IRB_flags.SFA = 1; // send SFS (not SEST index) - SfsLen = *pIRB_flags; - - SfsLen <<= 24; // shift flags to MSB - SfsLen += 32L; // add len to LSB (header only - no payload) - - // TYPE[31-24] 00 Basic Link Service - // f_ctl[23:0] exchg originator, 1st seq, xfer S.I. - CMDfchs->d_id |= 0x80000000L; // R_CTL = 80 for NOP (Basic Link Ser.) - CMDfchs->f_ctl = 0x00310000L; // xchng originator, 1st seq,.... - CMDfchs->seq_cnt = 0x0L; - CMDfchs->ox_rx_id = 0xFFFF; // RX_ID for now; OX_ID on start - CMDfchs->ro = 0x0L; // relative offset (n/a) - CMDfchs->pl[0] = 0xaabbccddL; // words 8-15 frame data payload (n/a) - Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 1; // seconds - // (NOP should complete ~instantly) - break; - - - - - case BLS_ABTS_ACC: // Abort Sequence ACCept - *pIRB_flags = 0; // clear IRB flags - IRB_flags.SFA = 1; // send SFS (not SEST index) - SfsLen = *pIRB_flags; - - SfsLen <<= 24; // shift flags to MSB - SfsLen += 32 + 12; // add len to LSB (header + 3 DWORD payload) - - CMDfchs->d_id |= 0x84000000L; // R_CTL = 84 for BASIC ACCept - // TYPE[31-24] 00 Basic Link Service - // f_ctl[23:0] exchg originator, not 1st seq, xfer S.I. - CMDfchs->f_ctl = 0x00910000L; // xchnge responder, last seq, xfer SI - // CMDfchs->seq_id & count might be set from DataHdr? - CMDfchs->ro = 0x0L; // relative offset (n/a) - Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 5; // seconds - // (Timeout in case of weird error) - - // now set the ACCept payload... - ba_acc = (BA_ACC_PAYLOAD*)&CMDfchs->pl[0]; - memset( ba_acc, 0, sizeof( BA_ACC_PAYLOAD)); - // Since PLDA requires (only) entire Exchange aborts, we don't need - // to worry about what the last sequence was. - - // We expect that a "target" task is accepting the abort, so we - // can use the OX/RX ID pair - ba_acc->ox_rx_id = CMDfchs->ox_rx_id; - - // source, dest, #bytes - BigEndianSwap((UCHAR *)&CMDfchs->ox_rx_id, (UCHAR *)&ba_acc->ox_rx_id, 4); - - ba_acc->low_seq_cnt = 0; - ba_acc->high_seq_cnt = 0xFFFF; - - - break; - - - case BLS_ABTS_RJT: // Abort Sequence ACCept - *pIRB_flags = 0; // clear IRB flags - IRB_flags.SFA = 1; // send SFS (not SEST index) - SfsLen = *pIRB_flags; - - SfsLen <<= 24; // shift flags to MSB - SfsLen += 32 + 12; // add len to LSB (header + 3 DWORD payload) - - CMDfchs->d_id |= 0x85000000L; // R_CTL = 85 for BASIC ReJecT - // f_ctl[23:0] exchg originator, not 1st seq, xfer S.I. - // TYPE[31-24] 00 Basic Link Service - CMDfchs->f_ctl = 0x00910000L; // xchnge responder, last seq, xfer SI - // CMDfchs->seq_id & count might be set from DataHdr? - CMDfchs->ro = 0x0L; // relative offset (n/a) - Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 5; // seconds - // (Timeout in case of weird error) - - CMDfchs->ox_rx_id = InFCHS->ox_rx_id; // copy from sender! - - // now set the ReJecT payload... - ba_rjt = (BA_RJT_PAYLOAD*)&CMDfchs->pl[0]; - memset( ba_rjt, 0, sizeof( BA_RJT_PAYLOAD)); - - // We expect that a "target" task couldn't find the Exhange in the - // array of active exchanges, so we use a new LinkService X_ID. - // See Reject payload description in FC-PH (Rev 4.3), pg. 140 - ba_rjt->reason_code = 0x09; // "unable to perform command request" - ba_rjt->reason_explain = 0x03; // invalid OX/RX ID pair - - - break; - - - case BLS_ABTS: // FC defined basic link service command ABTS - // Abort Sequence - - - *pIRB_flags = 0; // clear IRB flags - IRB_flags.SFA = 1; // send SFS (not SEST index) - SfsLen = *pIRB_flags; - - SfsLen <<= 24; // shift flags to MSB - SfsLen += 32L; // add len to LSB (header only - no payload) - - // TYPE[31-24] 00 Basic Link Service - // f_ctl[23:0] exchg originator, not 1st seq, xfer S.I. - CMDfchs->d_id |= 0x81000000L; // R_CTL = 81 for ABTS - CMDfchs->f_ctl = 0x00110000L; // xchnge originator, last seq, xfer SI - // CMDfchs->seq_id & count might be set from DataHdr? - CMDfchs->ro = 0x0L; // relative offset (n/a) - Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 2; // seconds - // (ABTS must timeout when responder is gone) - break; - - - - case FCS_NSR: // Fabric Name Service Request - Exchanges->fcExchange[ *fcExchangeIndex].reTries = 2; - - - Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 2; // seconds - // OX_ID, linked to Driver Transaction ID - // (fix-up at Queing time) - CMDfchs->ox_rx_id = 0xFFFF; // RX_ID - Responder (target) to modify - // OX_ID set at ERQueing time - *pIRB_flags = 0; // clear IRB flags - IRB_flags.SFA = 1; // send SFS (not SEST index) - SfsLen = *pIRB_flags; - - SfsLen <<= 24; // shift flags to MSB - SfsLen += (32L + sizeof(NSR_PL)); // add len (header & NSR payload) - - CMDfchs->d_id |= 0x02000000L; // R_CTL = 02 for - - // Name Service Request: Unsolicited - // TYPE[31-24] 01 Extended Link Service - // f_ctl[23:0] exchg originator, 1st seq, xfer S.I. - CMDfchs->f_ctl = 0x20210000L; - // OX_ID will be fixed-up at Tachyon enqueing time - CMDfchs->seq_cnt = 0; // seq ID, DF_ctl, seq cnt - CMDfchs->ro = 0x0L; // relative offset (n/a) - - BuildLinkServicePayload( fcChip, type, &CMDfchs->pl[0]); - - - - - - - break; - - - - - case ELS_PLOGI: // FC-PH extended link service command Port Login - // (May, 2000) - // NOTE! This special case facilitates SANMark testing. The SANMark - // test script for initialization-timeout.fcal.SANMark-1.fc - // "eats" the OPN() primitive without issuing an R_RDY, causing - // Tachyon to report LST (loop state timeout), which causes a - // LIP. To avoid this, simply send out the frame (i.e. assuming a - // buffer credit of 1) without waiting for R_RDY. Many FC devices - // (other than Tachyon) have been doing this for years. We don't - // ever want to do this for non-Link Service frames unless the - // other device really did report non-zero login BB credit (i.e. - // in the PLOGI ACCept frame). -// CMDfchs->sof_eof |= 0x00000400L; // LCr=1 - - case ELS_FDISC: // Fabric Discovery (Login) - case ELS_FLOGI: // Fabric Login - case ELS_SCR: // Fabric State Change Registration - case ELS_LOGO: // FC-PH extended link service command Port Logout - case ELS_PDISC: // FC-PH extended link service cmnd Port Discovery - case ELS_PRLI: // FC-PH extended link service cmnd Process Login - - Exchanges->fcExchange[ *fcExchangeIndex].reTries = 2; - - - Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 2; // seconds - // OX_ID, linked to Driver Transaction ID - // (fix-up at Queing time) - CMDfchs->ox_rx_id = 0xFFFF; // RX_ID - Responder (target) to modify - // OX_ID set at ERQueing time - *pIRB_flags = 0; // clear IRB flags - IRB_flags.SFA = 1; // send SFS (not SEST index) - SfsLen = *pIRB_flags; - - SfsLen <<= 24; // shift flags to MSB - if( type == ELS_LOGO ) - SfsLen += (32L + 16L); // add len (header & PLOGI payload) - else if( type == ELS_PRLI ) - SfsLen += (32L + 20L); // add len (header & PRLI payload) - else if( type == ELS_SCR ) - SfsLen += (32L + sizeof(SCR_PL)); // add len (header & SCR payload) - else - SfsLen += (32L + 116L); // add len (header & PLOGI payload) - - CMDfchs->d_id |= 0x22000000L; // R_CTL = 22 for - - // Extended Link_Data: Unsolicited Control - // TYPE[31-24] 01 Extended Link Service - // f_ctl[23:0] exchg originator, 1st seq, xfer S.I. - CMDfchs->f_ctl = 0x01210000L; - // OX_ID will be fixed-up at Tachyon enqueing time - CMDfchs->seq_cnt = 0; // seq ID, DF_ctl, seq cnt - CMDfchs->ro = 0x0L; // relative offset (n/a) - - BuildLinkServicePayload( fcChip, type, &CMDfchs->pl[0]); - - break; - - - - case ELS_LOGO_ACC: // FC-PH extended link service logout accept - case ELS_RJT: // extended link service reject (add reason) - case ELS_ACC: // ext. link service generic accept - case ELS_PLOGI_ACC:// ext. link service login accept (PLOGI or PDISC) - case ELS_PRLI_ACC: // ext. link service process login accept - - - Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 1; // assume done - // ensure unique X_IDs! (use tracking function) - // OX_ID from initiator cmd - ox_ID = (USHORT)(InFCHS->ox_rx_id >> 16); - rx_ID = 0xFFFF; // RX_ID, linked to Driver Exchange ID - - *pIRB_flags = 0; // clear IRB flags - IRB_flags.SFA = 1; // send SFS (not SEST index) - SfsLen = *pIRB_flags; - - SfsLen <<= 24; // shift flags to MSB - if( type == ELS_RJT ) - { - SfsLen += (32L + 8L); // add len (header + payload) - - // ELS_RJT reason codes (utilize unused "reserved" field) - CMDfchs->pl[0] = 1; - CMDfchs->pl[1] = InFCHS->reserved; - - } - else if( (type == ELS_LOGO_ACC) || (type == ELS_ACC) ) - SfsLen += (32L + 4L); // add len (header + payload) - else if( type == ELS_PLOGI_ACC ) - SfsLen += (32L + 116L); // add len (header + payload) - else if( type == ELS_PRLI_ACC ) - SfsLen += (32L + 20L); // add len (header + payload) - - CMDfchs->d_id |= 0x23000000L; // R_CTL = 23 for - - // Extended Link_Data: Control Reply - // TYPE[31-24] 01 Extended Link Service - // f_ctl[23:0] exchg responder, last seq, e_s, tsi - CMDfchs->f_ctl = 0x01990000L; - CMDfchs->seq_cnt = 0x0L; - CMDfchs->ox_rx_id = 0L; // clear - CMDfchs->ox_rx_id = ox_ID; // load upper 16 bits - CMDfchs->ox_rx_id <<= 16; // shift them - - CMDfchs->ro = 0x0L; // relative offset (n/a) - - BuildLinkServicePayload( fcChip, type, &CMDfchs->pl[0]); - - break; - - - // Fibre Channel SCSI 'originator' sequences... - // (originator means 'initiator' in FCP-SCSI) - - case SCSI_IWE: // TachLite Initiator Write Entry - { - PFC_LOGGEDIN_PORT pLoggedInPort = - Exchanges->fcExchange[ *fcExchangeIndex].pLoggedInPort; - - Exchanges->fcExchange[ *fcExchangeIndex].reTries = 1; - Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 7; // FC2 timeout - - // first, build FCP_CMND - // unique X_ID fix-ups in StartExchange - - *pIRB_flags = 0; // clear IRB flags - IRB_flags.SFA = 1; // send SFS FCP-CMND (not SEST index) - - // NOTE: unlike FC LinkService login frames, normal - // SCSI commands are sent without outgoing verification - IRB_flags.DCM = 1; // Disable completion message for Cmnd frame - SfsLen = *pIRB_flags; - - SfsLen <<= 24; // shift flags to MSB - SfsLen += 64L; // add len to LSB (header & CMND payload) - - CMDfchs->d_id |= (0x06000000L); // R_CTL = 6 for command - - // TYPE[31-24] 8 for FCP SCSI - // f_ctl[23:0] exchg originator, 1st seq, xfer S.I. - // valid RO - CMDfchs->f_ctl = 0x08210008L; - CMDfchs->seq_cnt = 0x0L; - CMDfchs->ox_rx_id = 0L; // clear for now (-or- in later) - CMDfchs->ro = 0x0L; // relative offset (n/a) - - // now, fill out FCP-DATA header - // (use buffer inside SEST object) - dataHDR = &fcChip->SEST->DataHDR[ *fcExchangeIndex ]; - dataHDR->reserved = 0L; // must clear - dataHDR->sof_eof = 0x75002000L; // SOFi3:EOFn no UAM; no CLS, noLCr, no TS - dataHDR->d_id = (InFCHS->s_id | 0x01000000L); // R_CTL= FCP_DATA - dataHDR->s_id = fcChip->Registers.my_al_pa; // CS_CTL = 0 - // TYPE[31-24] 8 for FCP SCSI - // f_ctl[23:0] xfer S.I.| valid RO - dataHDR->f_ctl = 0x08010008L; - dataHDR->seq_cnt = 0x02000000L; // sequence ID: df_ctl : seqence count - dataHDR->ox_rx_id = 0L; // clear; fix-up dataHDR fields later - dataHDR->ro = 0x0L; // relative offset (n/a) - - // Now setup the SEST entry - pIWE = &fcChip->SEST->u[ *fcExchangeIndex ].IWE; - - // fill out the IWE: - - // VALid entry:Dir outbound:DCM:enable CM:enal INT: FC frame len - pIWE->Hdr_Len = 0x8e000020L; // data frame Len always 32 bytes - - - // from login parameters with other port, what's the largest frame - // we can send? - if( pLoggedInPort == NULL) - { - ulStatus = INVALID_ARGS; // failed! give up - break; - } - if( pLoggedInPort->rx_data_size >= 2048) - fl = 0x00020000; // 2048 code (only support 1024!) - else if( pLoggedInPort->rx_data_size >= 1024) - fl = 0x00020000; // 1024 code - else if( pLoggedInPort->rx_data_size >= 512) - fl = 0x00010000; // 512 code - else - fl = 0; // 128 bytes -- should never happen - - - pIWE->Hdr_Len |= fl; // add xmit FC frame len for data phase - pIWE->Hdr_Addr = fcChip->SEST->base + - ((unsigned long)&fcChip->SEST->DataHDR[*fcExchangeIndex] - - (unsigned long)fcChip->SEST); - - pIWE->RSP_Len = sizeof(TachFCHDR_RSP) ; // hdr+data (recv'd RSP frame) - pIWE->RSP_Len |= (InFCHS->s_id << 8); // MS 24 bits Remote_ID - - memset( &fcChip->SEST->RspHDR[ *fcExchangeIndex].pl, 0, - sizeof( FCP_STATUS_RESPONSE) ); // clear out previous status - - pIWE->RSP_Addr = fcChip->SEST->base + - ((unsigned long)&fcChip->SEST->RspHDR[*fcExchangeIndex] - - (unsigned long)fcChip->SEST); - - // Do we need local or extended gather list? - // depends on size - we can handle 3 len/addr pairs - // locally. - - fcp_dl = build_SEST_sgList( - cpqfcHBAdata->PciDev, - &pIWE->GLen1, - Cmnd, // S/G list - &sgPairs, // return # of pairs in S/G list (from "Data" descriptor) - &fcChip->SEST->sgPages[ *fcExchangeIndex ]);// (for Freeing later) - - if( !fcp_dl ) // error building S/G list? - { - ulStatus = MEMPOOL_FAIL; - break; // give up - } - - // Now that we know total data length in - // the passed S/G buffer, set FCP CMND frame - build_FCP_payload( Cmnd, (UCHAR*)&CMDfchs->pl[0], type, fcp_dl ); - - - - if( sgPairs > 3 ) // need extended s/g list - pIWE->Buff_Off = 0x78000000L; // extended data | (no offset) - else // local data pointers (in SEST) - pIWE->Buff_Off = 0xf8000000L; // local data | (no offset) - - // ULONG 5 - pIWE->Link = 0x0000ffffL; // Buff_Index | Link - - pIWE->RX_ID = 0x0L; // DWord 6: RX_ID set by target XFER_RDY - - // DWord 7 - pIWE->Data_Len = 0L; // TL enters rcv'd XFER_RDY BURST_LEN - pIWE->Exp_RO = 0L; // DWord 8 - // DWord 9 - pIWE->Exp_Byte_Cnt = fcp_dl; // sum of gather buffers - } - break; - - - - - - case SCSI_IRE: // TachLite Initiator Read Entry - - if( Cmnd->timeout != 0) - { -// printk("Cmnd->timeout %d\n", Cmnd->timeout); - // per Linux Scsi - Exchanges->fcExchange[ *fcExchangeIndex].timeOut = Cmnd->timeout; - } - else // use our best guess, based on FC & device - { - - if( Cmnd->SCp.Message == 1 ) // Tape device? (from INQUIRY) - { - // turn off our timeouts (for now...) - Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 0xFFFFFFFF; - } - else - { - Exchanges->fcExchange[ *fcExchangeIndex].reTries = 1; - Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 7; // per SCSI req. - } - } - - - // first, build FCP_CMND - - - *pIRB_flags = 0; // clear IRB flags - IRB_flags.SFA = 1; // send SFS FCP-CMND (not SEST index) - // NOTE: unlike FC LinkService login frames, - // normal SCSI commands are sent "open loop" - IRB_flags.DCM = 1; // Disable completion message for Cmnd frame - SfsLen = *pIRB_flags; - - SfsLen <<= 24; // shift flags to MSB - SfsLen += 64L; // add len to LSB (header & CMND payload) - - CMDfchs->d_id |= (0x06000000L); // R_CTL = 6 for command - - // TYPE[31-24] 8 for FCP SCSI - // f_ctl[23:0] exchg originator, 1st seq, xfer S.I. - // valid RO - CMDfchs->f_ctl = 0x08210008L; - CMDfchs->seq_cnt = 0x0L; - // x_ID & data direction bit set later - CMDfchs->ox_rx_id = 0xFFFF; // clear - CMDfchs->ro = 0x0L; // relative offset (n/a) - - - - // Now setup the SEST entry - pIRE = &fcChip->SEST->u[ *fcExchangeIndex ].IRE; - - // fill out the IRE: - // VALid entry:Dir outbound:enable CM:enal INT: - pIRE->Seq_Accum = 0xCE000000L; // VAL,DIR inbound,DCM| INI,DAT,RSP - - pIRE->reserved = 0L; - pIRE->RSP_Len = sizeof(TachFCHDR_RSP) ; // hdr+data (recv'd RSP frame) - pIRE->RSP_Len |= (InFCHS->s_id << 8); // MS 24 bits Remote_ID - - pIRE->RSP_Addr = fcChip->SEST->base + - ((unsigned long)&fcChip->SEST->RspHDR[*fcExchangeIndex] - - (unsigned long)fcChip->SEST); - - // Do we need local or extended gather list? - // depends on size - we can handle 3 len/addr pairs - // locally. - - fcp_dl = build_SEST_sgList( - cpqfcHBAdata->PciDev, - &pIRE->SLen1, - Cmnd, // SCSI command Data desc. with S/G list - &sgPairs, // return # of pairs in S/G list (from "Data" descriptor) - &fcChip->SEST->sgPages[ *fcExchangeIndex ]);// (for Freeing later) - - - if( !fcp_dl ) // error building S/G list? - { - // It is permissible to have a ZERO LENGTH Read command. - // If there is the case, simply set fcp_dl (and Exp_Byte_Cnt) - // to 0 and continue. - if( Cmnd->request_bufflen == 0 ) - { - fcp_dl = 0; // no FC DATA frames expected - - } - else - { - ulStatus = MEMPOOL_FAIL; - break; // give up - } - } - - // now that we know the S/G length, build CMND payload - build_FCP_payload( Cmnd, (UCHAR*)&CMDfchs->pl[0], type, fcp_dl ); - - - if( sgPairs > 3 ) // need extended s/g list - pIRE->Buff_Off = 0x00000000; // DWord 4: extended s/g list, no offset - else - pIRE->Buff_Off = 0x80000000; // local data, no offset - - pIRE->Buff_Index = 0x0L; // DWord 5: Buff_Index | Reserved - - pIRE->Exp_RO = 0x0L; // DWord 6: Expected Rel. Offset - - pIRE->Byte_Count = 0; // DWord 7: filled in by TL on err - pIRE->reserved_ = 0; // DWord 8: reserved - // NOTE: 0 length READ is OK. - pIRE->Exp_Byte_Cnt = fcp_dl;// DWord 9: sum of scatter buffers - - break; - - - - - // Fibre Channel SCSI 'responder' sequences... - // (originator means 'target' in FCP-SCSI) - case SCSI_TWE: // TachLite Target Write Entry - - Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 10; // per SCSI req. - - // first, build FCP_CMND - - *pIRB_flags = 0; // clear IRB flags - IRB_flags.SFA = 1; // send SFS (XFER_RDY) - SfsLen = *pIRB_flags; - - SfsLen <<= 24; // shift flags to MSB - SfsLen += (32L + 12L);// add SFS len (header & XFER_RDY payload) - - CMDfchs->d_id |= (0x05000000L); // R_CTL = 5 for XFER_RDY - - // TYPE[31-24] 8 for FCP SCSI - // f_ctl[23:0] exchg responder, 1st seq, xfer S.I. - // valid RO - CMDfchs->f_ctl = 0x08810008L; - CMDfchs->seq_cnt = 0x01000000; // sequence ID: df_ctl: sequence count - // use originator (other port's) OX_ID - CMDfchs->ox_rx_id = InFCHS->ox_rx_id; // we want upper 16 bits - CMDfchs->ro = 0x0L; // relative offset (n/a) - - // now, fill out FCP-RSP header - // (use buffer inside SEST object) - - rspHDR = &fcChip->SEST->RspHDR[ *fcExchangeIndex ]; - rspHDR->reserved = 0L; // must clear - rspHDR->sof_eof = 0x75000000L; // SOFi3:EOFn no UAM; no CLS, noLCr, no TS - rspHDR->d_id = (InFCHS->s_id | 0x07000000L); // R_CTL= FCP_RSP - rspHDR->s_id = fcChip->Registers.my_al_pa; // CS_CTL = 0 - // TYPE[31-24] 8 for FCP SCSI - // f_ctl[23:0] responder|last seq| xfer S.I. - rspHDR->f_ctl = 0x08910000L; - rspHDR->seq_cnt = 0x03000000; // sequence ID - rspHDR->ox_rx_id = InFCHS->ox_rx_id; // gives us OX_ID - rspHDR->ro = 0x0L; // relative offset (n/a) - - - // Now setup the SEST entry - - pTWE = &fcChip->SEST->u[ *fcExchangeIndex ].TWE; - - // fill out the TWE: - - // VALid entry:Dir outbound:enable CM:enal INT: - pTWE->Seq_Accum = 0xC4000000L; // upper word flags - pTWE->reserved = 0L; - pTWE->Remote_Node_ID = 0L; // no more auto RSP frame! (TL/TS change) - pTWE->Remote_Node_ID |= (InFCHS->s_id << 8); // MS 24 bits Remote_ID - - - // Do we need local or extended gather list? - // depends on size - we can handle 3 len/addr pairs - // locally. - - fcp_dl = build_SEST_sgList( - cpqfcHBAdata->PciDev, - &pTWE->SLen1, - Cmnd, // S/G list - &sgPairs, // return # of pairs in S/G list (from "Data" descriptor) - &fcChip->SEST->sgPages[ *fcExchangeIndex ]);// (for Freeing later) - - - if( !fcp_dl ) // error building S/G list? - { - ulStatus = MEMPOOL_FAIL; - break; // give up - } - - // now that we know the S/G length, build CMND payload - build_FCP_payload( Cmnd, (UCHAR*)&CMDfchs->pl[0], type, fcp_dl ); - - - if( sgPairs > 3 ) // need extended s/g list - pTWE->Buff_Off = 0x00000000; // extended s/g list, no offset - else - pTWE->Buff_Off = 0x80000000; // local data, no offset - - pTWE->Buff_Index = 0; // Buff_Index | Link - pTWE->Exp_RO = 0; - pTWE->Byte_Count = 0; // filled in by TL on err - pTWE->reserved_ = 0; - pTWE->Exp_Byte_Cnt = fcp_dl;// sum of scatter buffers - - break; - - - - - - - case SCSI_TRE: // TachLite Target Read Entry - - // It doesn't make much sense for us to "time-out" a READ, - // but we'll use it for design consistency and internal error recovery. - Exchanges->fcExchange[ *fcExchangeIndex].timeOut = 10; // per SCSI req. - - // I/O request block settings... - *pIRB_flags = 0; // clear IRB flags - // check PRLI (process login) info - // to see if Initiator Requires XFER_RDY - // if not, don't send one! - // { PRLI check...} - IRB_flags.SFA = 0; // don't send XFER_RDY - start data - SfsLen = *pIRB_flags; - - SfsLen <<= 24; // shift flags to MSB - SfsLen += (32L + 12L);// add SFS len (header & XFER_RDY payload) - - - - // now, fill out FCP-DATA header - // (use buffer inside SEST object) - dataHDR = &fcChip->SEST->DataHDR[ *fcExchangeIndex ]; - - dataHDR->reserved = 0L; // must clear - dataHDR->sof_eof = 0x75000000L; // SOFi3:EOFn no UAM; no CLS,noLCr,no TS - dataHDR->d_id = (InFCHS->s_id | 0x01000000L); // R_CTL= FCP_DATA - dataHDR->s_id = fcChip->Registers.my_al_pa; // CS_CTL = 0 - - - // TYPE[31-24] 8 for FCP SCSI - // f_ctl[23:0] exchg responder, not 1st seq, xfer S.I. - // valid RO - dataHDR->f_ctl = 0x08810008L; - dataHDR->seq_cnt = 0x01000000; // sequence ID (no XRDY) - dataHDR->ox_rx_id = InFCHS->ox_rx_id & 0xFFFF0000; // we want upper 16 bits - dataHDR->ro = 0x0L; // relative offset (n/a) - - // now, fill out FCP-RSP header - // (use buffer inside SEST object) - rspHDR = &fcChip->SEST->RspHDR[ *fcExchangeIndex ]; - - rspHDR->reserved = 0L; // must clear - rspHDR->sof_eof = 0x75000000L; // SOFi3:EOFn no UAM; no CLS, noLCr, no TS - rspHDR->d_id = (InFCHS->s_id | 0x07000000L); // R_CTL= FCP_RSP - rspHDR->s_id = fcChip->Registers.my_al_pa; // CS_CTL = 0 - // TYPE[31-24] 8 for FCP SCSI - // f_ctl[23:0] responder|last seq| xfer S.I. - rspHDR->f_ctl = 0x08910000L; - rspHDR->seq_cnt = 0x02000000; // sequence ID: df_ctl: sequence count - - rspHDR->ro = 0x0L; // relative offset (n/a) - - - // Now setup the SEST entry - pTRE = &fcChip->SEST->u[ *fcExchangeIndex ].TRE; - - - // VALid entry:Dir outbound:enable CM:enal INT: - pTRE->Hdr_Len = 0x86010020L; // data frame Len always 32 bytes - pTRE->Hdr_Addr = // bus address of dataHDR; - fcChip->SEST->base + - ((unsigned long)&fcChip->SEST->DataHDR[ *fcExchangeIndex ] - - (unsigned long)fcChip->SEST); - - pTRE->RSP_Len = 64L; // hdr+data (TL assisted RSP frame) - pTRE->RSP_Len |= (InFCHS->s_id << 8); // MS 24 bits Remote_ID - pTRE->RSP_Addr = // bus address of rspHDR - fcChip->SEST->base + - ((unsigned long)&fcChip->SEST->RspHDR[ *fcExchangeIndex ] - - (unsigned long)fcChip->SEST); - - // Do we need local or extended gather list? - // depends on size - we can handle 3 len/addr pairs - // locally. - - fcp_dl = build_SEST_sgList( - cpqfcHBAdata->PciDev, - &pTRE->GLen1, - Cmnd, // S/G list - &sgPairs, // return # of pairs in S/G list (from "Data" descriptor) - &fcChip->SEST->sgPages[ *fcExchangeIndex ]);// (for Freeing later) - - - if( !fcp_dl ) // error building S/G list? - { - ulStatus = MEMPOOL_FAIL; - break; // give up - } - - // no payload or command to build -- READ doesn't need XRDY - - - if( sgPairs > 3 ) // need extended s/g list - pTRE->Buff_Off = 0x78000000L; // extended data | (no offset) - else // local data pointers (in SEST) - pTRE->Buff_Off = 0xf8000000L; // local data | (no offset) - - // ULONG 5 - pTRE->Buff_Index = 0L; // Buff_Index | reserved - pTRE->reserved = 0x0L; // DWord 6 - - // DWord 7: NOTE: zero length will - // hang TachLite! - pTRE->Data_Len = fcp_dl; // e.g. sum of scatter buffers - - pTRE->reserved_ = 0L; // DWord 8 - pTRE->reserved__ = 0L; // DWord 9 - - break; - - - - - - - - case FCP_RESPONSE: - // Target response frame: this sequence uses an OX/RX ID - // pair from a completed SEST exchange. We built most - // of the response frame when we created the TWE/TRE. - - *pIRB_flags = 0; // clear IRB flags - IRB_flags.SFA = 1; // send SFS (RSP) - SfsLen = *pIRB_flags; - - SfsLen <<= 24; // shift flags to MSB - SfsLen += sizeof(TachFCHDR_RSP);// add SFS len (header & RSP payload) - - - Exchanges->fcExchange[ *fcExchangeIndex].type = - FCP_RESPONSE; // change Exchange type to "response" phase - - // take advantage of prior knowledge of OX/RX_ID pair from - // previous XFER outbound frame (still in fchs of exchange) - fcChip->SEST->RspHDR[ *fcExchangeIndex ].ox_rx_id = - CMDfchs->ox_rx_id; - - // Check the status of the DATA phase of the exchange so we can report - // status to the initiator - buildFCPstatus( fcChip, *fcExchangeIndex); // set RSP payload fields - - memcpy( - CMDfchs, // re-use same XFER fchs for Response frame - &fcChip->SEST->RspHDR[ *fcExchangeIndex ], - sizeof( TachFCHDR_RSP )); - - - break; - - default: - printk("cpqfcTS: don't know how to build FC type: %Xh(%d)\n", type,type); - break; - - } - - - - if( !ulStatus) // no errors above? - { - // FCHS is built; now build IRB - - // link the just built FCHS (the "command") to the IRB entry - // for this Exchange. - pIRB = &Exchanges->fcExchange[ *fcExchangeIndex].IRB; - - // len & flags according to command type above - pIRB->Req_A_SFS_Len = SfsLen; // includes IRB flags & len - pIRB->Req_A_SFS_Addr = // TL needs physical addr of frame to send - fcChip->exch_dma_handle + (unsigned long)CMDfchs - - (unsigned long)Exchanges; - - pIRB->Req_A_SFS_D_ID = CMDfchs->d_id << 8; // Dest_ID must be consistent! - - // Exchange is complete except for "fix-up" fields to be set - // at Tachyon Queuing time: - // IRB->Req_A_Trans_ID (OX_ID/ RX_ID): - // for SEST entry, lower bits correspond to actual FC Exchange ID - // fchs->OX_ID or RX_ID - } - else - { -#ifdef DBG - printk( "FC Error: SEST build Pool Allocation failed\n"); -#endif - // return resources... - cpqfcTSCompleteExchange( cpqfcHBAdata->PciDev, fcChip, *fcExchangeIndex); // SEST build failed - } - } - else // no Exchanges available - { - ulStatus = SEST_FULL; - printk( "FC Error: no fcExchanges available\n"); - } - return ulStatus; -} - - - - - - -// set RSP payload fields -static void buildFCPstatus( PTACHYON fcChip, ULONG ExchangeID) -{ - FC_EXCHANGES *Exchanges = fcChip->Exchanges; - FC_EXCHANGE *pExchange = &Exchanges->fcExchange[ExchangeID]; // shorthand - PFCP_STATUS_RESPONSE pFcpStatus; - - memset( &fcChip->SEST->RspHDR[ ExchangeID ].pl, 0, - sizeof( FCP_STATUS_RESPONSE) ); - if( pExchange->status ) // something wrong? - { - pFcpStatus = (PFCP_STATUS_RESPONSE) // cast RSP buffer for this xchng - &fcChip->SEST->RspHDR[ ExchangeID ].pl; - if( pExchange->status & COUNT_ERROR ) - { - - // set FCP response len valid (so we can report count error) - pFcpStatus->fcp_status |= FCP_RSP_LEN_VALID; - pFcpStatus->fcp_rsp_len = 0x04000000; // 4 byte len (BIG Endian) - - pFcpStatus->fcp_rsp_info = FCP_DATA_LEN_NOT_BURST_LEN; // RSP_CODE - } - } -} - - -static dma_addr_t -cpqfc_pci_map_sg_page( - struct pci_dev *pcidev, - ULONG *hw_paddr, // where to put phys addr for HW use - void *sgp_vaddr, // the virtual address of the sg page - dma_addr_t *umap_paddr, // where to put phys addr for unmap - unsigned int *maplen, // where to store sg entry length - int PairCount) // number of sg pairs used in the page. -{ - unsigned long aligned_addr = (unsigned long) sgp_vaddr; - - *maplen = PairCount * 8; - aligned_addr += TL_EXT_SG_PAGE_BYTELEN; - aligned_addr &= ~(TL_EXT_SG_PAGE_BYTELEN -1); - - *umap_paddr = pci_map_single(pcidev, (void *) aligned_addr, - *maplen, PCI_DMA_TODEVICE); - *hw_paddr = (ULONG) *umap_paddr; - -# if BITS_PER_LONG > 32 - if( *umap_paddr >>32 ) { - printk("cqpfcTS:Tach SG DMA addr %p>32 bits\n", - (void*)umap_paddr); - return 0; - } -# endif - return *umap_paddr; -} - -static void -cpqfc_undo_SEST_mappings(struct pci_dev *pcidev, - unsigned long contigaddr, int len, int dir, - struct scatterlist *sgl, int use_sg, - PSGPAGES *sgPages_head, - int allocated_pages) -{ - PSGPAGES i, next; - - if (contigaddr != (unsigned long) NULL) - pci_unmap_single(pcidev, contigaddr, len, dir); - - if (sgl != NULL) - pci_unmap_sg(pcidev, sgl, use_sg, dir); - - for (i=*sgPages_head; i != NULL ;i = next) - { - pci_unmap_single(pcidev, i->busaddr, i->maplen, - PCI_DMA_TODEVICE); - i->busaddr = (dma_addr_t) NULL; - i->maplen = 0L; - next = i->next; - kfree(i); - } - *sgPages_head = NULL; -} - -// This routine builds scatter/gather lists into SEST entries -// INPUTS: -// SESTalPair - SEST address @DWordA "Local Buffer Length" -// sgList - Scatter/Gather linked list of Len/Address data buffers -// OUTPUT: -// sgPairs - number of valid address/length pairs -// Remarks: -// The SEST data buffer pointers only depend on number of -// length/ address pairs, NOT on the type (IWE, TRE,...) -// Up to 3 pairs can be referenced in the SEST - more than 3 -// require this Extended S/G list page. The page holds 4, 8, 16... -// len/addr pairs, per Scatter/Gather List Page Length Reg. -// TachLite allows pages to be linked to any depth. - -//#define DBG_SEST_SGLIST 1 // for printing out S/G pairs with Ext. pages - -static int ap_hi_water = TL_DANGER_SGPAGES; - -static ULONG build_SEST_sgList( - struct pci_dev *pcidev, - ULONG *SESTalPairStart, // the 3 len/address buffers in SEST - Scsi_Cmnd *Cmnd, - ULONG *sgPairs, - PSGPAGES *sgPages_head) // link list of TL Ext. S/G pages from O/S Pool - -{ - ULONG i, AllocatedPages=0; // Tach Ext. S/G page allocations - ULONG* alPair = SESTalPairStart; - ULONG* ext_sg_page_phys_addr_place = NULL; - int PairCount; - unsigned long ulBuff, contigaddr; - ULONG total_data_len=0; // (in bytes) - ULONG bytes_to_go = Cmnd->request_bufflen; // total xfer (S/G sum) - ULONG thisMappingLen; - struct scatterlist *sgl = NULL; // S/G list (Linux format) - int sg_count, totalsgs; - dma_addr_t busaddr; - unsigned long thislen, offset; - PSGPAGES *sgpage = sgPages_head; - PSGPAGES prev_page = NULL; - -# define WE_HAVE_SG_LIST (sgl != (unsigned long) NULL) - contigaddr = (unsigned long) NULL; - - if( !Cmnd->use_sg ) // no S/G list? - { - if (bytes_to_go <= TL_MAX_SG_ELEM_LEN) - { - *sgPairs = 1; // use "local" S/G pair in SEST entry - // (for now, ignore address bits above #31) - - *alPair++ = bytes_to_go; // bits 18-0, length - - if (bytes_to_go != 0) { - contigaddr = ulBuff = pci_map_single(pcidev, - Cmnd->request_buffer, - Cmnd->request_bufflen, - Cmnd->sc_data_direction); - // printk("ms %p ", ulBuff); - } - else { - // No data transfer, (e.g.: Test Unit Ready) - // printk("btg=0 "); - *sgPairs = 0; - memset(alPair, 0, sizeof(*alPair)); - return 0; - } - -# if BITS_PER_LONG > 32 - if( ulBuff >>32 ) { - printk("FATAL! Tachyon DMA address %p " - "exceeds 32 bits\n", (void*)ulBuff ); - return 0; - } -# endif - *alPair = (ULONG)ulBuff; - return bytes_to_go; - } - else // We have a single large (too big) contiguous buffer. - { // We will have to break it up. We'll use the scatter - // gather code way below, but use contigaddr instead - // of sg_dma_addr(). (this is a very rare case). - - unsigned long btg; - contigaddr = pci_map_single(pcidev, Cmnd->request_buffer, - Cmnd->request_bufflen, - Cmnd->sc_data_direction); - - // printk("contigaddr = %p, len = %d\n", - // (void *) contigaddr, bytes_to_go); - totalsgs = 0; - for (btg = bytes_to_go; btg > 0; ) { - btg -= ( btg > TL_MAX_SG_ELEM_LEN ? - TL_MAX_SG_ELEM_LEN : btg ); - totalsgs++; - } - sgl = NULL; - *sgPairs = totalsgs; - } - } - else // we do have a scatter gather list - { - // [TBD - update for Linux to support > 32 bits addressing] - // since the format for local & extended S/G lists is different, - // check if S/G pairs exceeds 3. - // *sgPairs = Cmnd->use_sg; Nope, that's wrong. - - sgl = (struct scatterlist*)Cmnd->request_buffer; - sg_count = pci_map_sg(pcidev, sgl, Cmnd->use_sg, - Cmnd->sc_data_direction); - if( sg_count <= 3 ) { - - // we need to be careful here that no individual mapping - // is too large, and if any is, that breaking it up - // doesn't push us over 3 sgs, or, if it does, that we - // handle that case. Tachyon can take 0x7FFFF bits for length, - // but sg structure uses "unsigned int", on the face of it, - // up to 0xFFFFFFFF or even more. - - int i; - unsigned long thislen; - - totalsgs = 0; - for (i=0;i<sg_count;i++) { - thislen = sg_dma_len(&sgl[i]); - while (thislen >= TL_MAX_SG_ELEM_LEN) { - totalsgs++; - thislen -= TL_MAX_SG_ELEM_LEN; - } - if (thislen > 0) totalsgs++; - } - *sgPairs = totalsgs; - } else totalsgs = 999; // as a first estimate, definitely >3, - - // if (totalsgs != sg_count) - // printk("totalsgs = %d, sgcount=%d\n",totalsgs,sg_count); - } - - if( totalsgs <= 3 ) // can (must) use "local" SEST list - { - while( bytes_to_go) - { - offset = 0L; - - if ( WE_HAVE_SG_LIST ) - thisMappingLen = sg_dma_len(sgl); - else // or contiguous buffer? - thisMappingLen = bytes_to_go; - - while (thisMappingLen > 0) - { - thislen = thisMappingLen > TL_MAX_SG_ELEM_LEN ? - TL_MAX_SG_ELEM_LEN : thisMappingLen; - bytes_to_go = bytes_to_go - thislen; - - // we have L/A pair; L = thislen, A = physicalAddress - // load into SEST... - - total_data_len += thislen; - *alPair = thislen; // bits 18-0, length - - alPair++; - - if ( WE_HAVE_SG_LIST ) - ulBuff = sg_dma_address(sgl) + offset; - else - ulBuff = contigaddr + offset; - - offset += thislen; - -# if BITS_PER_LONG > 32 - if( ulBuff >>32 ) { - printk("cqpfcTS: 2Tach DMA address %p > 32 bits\n", - (void*)ulBuff ); - printk("%s = %p, offset = %ld\n", - WE_HAVE_SG_LIST ? "ulBuff" : "contigaddr", - WE_HAVE_SG_LIST ? (void *) ulBuff : (void *) contigaddr, - offset); - return 0; - } -# endif - *alPair++ = (ULONG)ulBuff; // lower 32 bits (31-0) - thisMappingLen -= thislen; - } - - if ( WE_HAVE_SG_LIST ) ++sgl; // next S/G pair - else if (bytes_to_go != 0) printk("BTG not zero!\n"); - -# ifdef DBG_SEST_SGLIST - printk("L=%d ", thisMappingLen); - printk("btg=%d ", bytes_to_go); -# endif - - } - // printk("i:%d\n", *sgPairs); - } - else // more than 3 pairs requires Extended S/G page (Pool Allocation) - { - // clear out SEST DWORDs (local S/G addr) C-F (A-B set in following logic) - for( i=2; i<6; i++) - alPair[i] = 0; - - PairCount = TL_EXT_SG_PAGE_COUNT; // forces initial page allocation - totalsgs = 0; - while( bytes_to_go ) - { - // Per SEST format, we can support 524287 byte lengths per - // S/G pair. Typical user buffers are 4k, and very rarely - // exceed 12k due to fragmentation of physical memory pages. - // However, on certain O/S system (not "user") buffers (on platforms - // with huge memories), it's possible to exceed this - // length in a single S/G address/len mapping, so we have to handle - // that. - - offset = 0L; - if ( WE_HAVE_SG_LIST ) - thisMappingLen = sg_dma_len(sgl); - else - thisMappingLen = bytes_to_go; - - while (thisMappingLen > 0) - { - thislen = thisMappingLen > TL_MAX_SG_ELEM_LEN ? - TL_MAX_SG_ELEM_LEN : thisMappingLen; - // printk("%d/%d/%d\n", thislen, thisMappingLen, bytes_to_go); - - // should we load into "this" extended S/G page, or allocate - // new page? - - if( PairCount >= TL_EXT_SG_PAGE_COUNT ) - { - // Now, we have to map the previous page, (triggering buffer bounce) - // The first time thru the loop, there won't be a previous page. - if (prev_page != NULL) // is there a prev page? - { - // this code is normally kind of hard to trigger, - // you have to use up more than 256 scatter gather - // elements to get here. Cranking down TL_MAX_SG_ELEM_LEN - // to an absurdly low value (128 bytes or so) to artificially - // break i/o's into a zillion pieces is how I tested it. - busaddr = cpqfc_pci_map_sg_page(pcidev, - ext_sg_page_phys_addr_place, - prev_page->page, - &prev_page->busaddr, - &prev_page->maplen, - PairCount); - } - // Allocate the TL Extended S/G list page. We have - // to allocate twice what we want to ensure required TL alignment - // (Tachlite TL/TS User Man. Rev 6.0, p 168) - // We store the original allocated PVOID so we can free later - *sgpage = kmalloc( sizeof(SGPAGES), GFP_ATOMIC); - if ( ! *sgpage ) - { - printk("cpqfc: Allocation failed @ %d S/G page allocations\n", - AllocatedPages); - total_data_len = 0; // failure!! Ext. S/G is All-or-none affair - - // unmap the previous mappings, if any. - - cpqfc_undo_SEST_mappings(pcidev, contigaddr, - Cmnd->request_bufflen, - Cmnd->sc_data_direction, - sgl, Cmnd->use_sg, sgPages_head, AllocatedPages+1); - - // FIXME: testing shows that if we get here, - // it's bad news. (this has been this way for a long - // time though, AFAIK. Not that that excuses it.) - - return 0; // give up (and probably hang the system) - } - // clear out memory we just allocated - memset( (*sgpage)->page,0,TL_EXT_SG_PAGE_BYTELEN*2); - (*sgpage)->next = NULL; - (*sgpage)->busaddr = (dma_addr_t) NULL; - (*sgpage)->maplen = 0L; - - // align the memory - TL requires sizeof() Ext. S/G page alignment. - // We doubled the actual required size so we could mask off LSBs - // to get desired offset - - ulBuff = (unsigned long) (*sgpage)->page; - ulBuff += TL_EXT_SG_PAGE_BYTELEN; - ulBuff &= ~(TL_EXT_SG_PAGE_BYTELEN -1); - - // set pointer, in SEST if first Ext. S/G page, or in last pair - // of linked Ext. S/G pages... (Only 32-bit PVOIDs, so just - // load lower 32 bits) - // NOTE: the Len field must be '0' if this is the first Ext. S/G - // pointer in SEST, and not 0 otherwise (we know thislen != 0). - - *alPair = (alPair != SESTalPairStart) ? thislen : 0; - -# ifdef DBG_SEST_SGLIST - printk("PairCount %d @%p even %Xh, ", - PairCount, alPair, *alPair); -# endif - - // Save the place where we need to store the physical - // address of this scatter gather page which we get when we map it - // (and mapping we can do only after we fill it in.) - alPair++; // next DWORD, will contain phys addr of the ext page - ext_sg_page_phys_addr_place = alPair; - - // Now, set alPair = the virtual addr of the (Extended) S/G page - // which will accept the Len/ PhysicalAddress pairs - alPair = (ULONG *) ulBuff; - - AllocatedPages++; - if (AllocatedPages >= ap_hi_water) - { - // This message should rarely, if ever, come out. - // Previously (cpqfc version <= 2.0.5) the driver would - // just puke if more than 4 SG pages were used, and nobody - // ever complained about that. This only comes out if - // more than 8 pages are used. - - printk(KERN_WARNING - "cpqfc: Possible danger. %d scatter gather pages used.\n" - "cpqfc: detected seemingly extreme memory " - "fragmentation or huge data transfers.\n", - AllocatedPages); - ap_hi_water = AllocatedPages+1; - } - - PairCount = 1; // starting new Ext. S/G page - prev_page = (*sgpage); // remember this page, for next time thru - sgpage = &((*sgpage)->next); - } // end of new TL Ext. S/G page allocation - - *alPair = thislen; // bits 18-0, length (range check above) - -# ifdef DBG_SEST_SGLIST - printk("PairCount %d @%p, even %Xh, ", PairCount, alPair, *alPair); -# endif - - alPair++; // next DWORD, physical address - - if ( WE_HAVE_SG_LIST ) - ulBuff = sg_dma_address(sgl) + offset; - else - ulBuff = contigaddr + offset; - offset += thislen; - -# if BITS_PER_LONG > 32 - if( ulBuff >>32 ) - { - printk("cqpfcTS: 1Tach DMA address %p > 32 bits\n", (void*)ulBuff ); - printk("%s = %p, offset = %ld\n", - WE_HAVE_SG_LIST ? "ulBuff" : "contigaddr", - WE_HAVE_SG_LIST ? (void *) ulBuff : (void *) contigaddr, - offset); - return 0; - } -# endif - - *alPair = (ULONG) ulBuff; // lower 32 bits (31-0) - -# ifdef DBG_SEST_SGLIST - printk("odd %Xh\n", *alPair); -# endif - alPair++; // next DWORD, next address/length pair - - PairCount++; // next Length/Address pair - - // if (PairCount > pc_hi_water) - // { - // printk("pc hi = %d ", PairCount); - // pc_hi_water = PairCount; - // } - bytes_to_go -= thislen; - total_data_len += thislen; - thisMappingLen -= thislen; - totalsgs++; - } // while (thisMappingLen > 0) - if ( WE_HAVE_SG_LIST ) sgl++; // next S/G pair - } // while (bytes_to_go) - - // printk("Totalsgs=%d\n", totalsgs); - *sgPairs = totalsgs; - - // PCI map (and bounce) the last (and usually only) extended SG page - busaddr = cpqfc_pci_map_sg_page(pcidev, - ext_sg_page_phys_addr_place, - prev_page->page, - &prev_page->busaddr, - &prev_page->maplen, - PairCount); - } - return total_data_len; -} - - - -// The Tachlite SEST table is referenced to OX_ID (or RX_ID). To optimize -// performance and debuggability, we index the Exchange structure to FC X_ID -// This enables us to build exchanges for later en-queing to Tachyon, -// provided we have an open X_ID slot. At Tachyon queing time, we only -// need an ERQ slot; then "fix-up" references in the -// IRB, FCHS, etc. as needed. -// RETURNS: -// 0 if successful -// non-zero on error -//sstartex -ULONG cpqfcTSStartExchange( - CPQFCHBA *cpqfcHBAdata, - LONG ExchangeID ) -{ - PTACHYON fcChip = &cpqfcHBAdata->fcChip; - FC_EXCHANGES *Exchanges = fcChip->Exchanges; - FC_EXCHANGE *pExchange = &Exchanges->fcExchange[ ExchangeID ]; // shorthand - USHORT producer, consumer; - ULONG ulStatus=0; - short int ErqIndex; - BOOLEAN CompleteExchange = FALSE; // e.g. ACC replies are complete - BOOLEAN SestType=FALSE; - ULONG InboundData=0; - - // We will manipulate Tachlite chip registers here to successfully - // start exchanges. - - // Check that link is not down -- we can't start an exchange on a - // down link! - - if( fcChip->Registers.FMstatus.value & 0x80) // LPSM offline? - { -printk("fcStartExchange: PSM offline (%Xh), x_ID %Xh, type %Xh, port_id %Xh\n", - fcChip->Registers.FMstatus.value & 0xFF, - ExchangeID, - pExchange->type, - pExchange->fchs.d_id); - - if( ExchangeID >= TACH_SEST_LEN ) // Link Service Outbound frame? - { - // Our most popular LinkService commands are port discovery types - // (PLOGI/ PDISC...), which are implicitly nullified by Link Down - // events, so it makes no sense to Que them. However, ABTS should - // be queued, since exchange sequences are likely destroyed by - // Link Down events, and we want to notify other ports of broken - // sequences by aborting the corresponding exchanges. - if( pExchange->type != BLS_ABTS ) - { - ulStatus = LNKDWN_OSLS; - goto Done; - // don't Que most LinkServ exchanges on LINK DOWN - } - } - - printk("fcStartExchange: Que x_ID %Xh, type %Xh\n", - ExchangeID, pExchange->type); - pExchange->status |= EXCHANGE_QUEUED; - ulStatus = EXCHANGE_QUEUED; - goto Done; - } - - // Make sure ERQ has available space. - - producer = (USHORT)fcChip->ERQ->producerIndex; // copies for logical arith. - consumer = (USHORT)fcChip->ERQ->consumerIndex; - producer++; // We are testing for full que by incrementing - - if( producer >= ERQ_LEN ) // rollover condition? - producer = 0; - if( consumer != producer ) // ERQ not full? - { - // ****************** Need Atomic access to chip registers!!******** - - // remember ERQ PI for copying IRB - ErqIndex = (USHORT)fcChip->ERQ->producerIndex; - fcChip->ERQ->producerIndex = producer; // this is written to Tachyon - // we have an ERQ slot! If SCSI command, need SEST slot - // otherwise we are done. - - // Note that Tachyon requires that bit 15 of the OX_ID or RX_ID be - // set according to direction of data to/from Tachyon for SEST assists. - // For consistency, enforce this rule for Link Service (non-SEST) - // exchanges as well. - - // fix-up the X_ID field in IRB - pExchange->IRB.Req_A_Trans_ID = ExchangeID & 0x7FFF; // 15-bit field - - // fix-up the X_ID field in fchs -- depends on Originator or Responder, - // outgoing or incoming data? - switch( pExchange->type ) - { - // ORIGINATOR types... we're setting our OX_ID and - // defaulting the responder's RX_ID to 0xFFFF - - case SCSI_IRE: - // Requirement: set MSB of x_ID for Incoming TL data - // (see "Tachyon TL/TS User's Manual", Rev 6.0, Sept.'98, pg. 50) - InboundData = 0x8000; - - case SCSI_IWE: - SestType = TRUE; - pExchange->fchs.ox_rx_id = (ExchangeID | InboundData); - pExchange->fchs.ox_rx_id <<= 16; // MSW shift - pExchange->fchs.ox_rx_id |= 0xffff; // add default RX_ID - - // now fix-up the Data HDR OX_ID (TL automatically does rx_id) - // (not necessary for IRE -- data buffer unused) - if( pExchange->type == SCSI_IWE) - { - fcChip->SEST->DataHDR[ ExchangeID ].ox_rx_id = - pExchange->fchs.ox_rx_id; - - } - - break; - - - case FCS_NSR: // ext. link service Name Service Request - case ELS_SCR: // ext. link service State Change Registration - case ELS_FDISC:// ext. link service login - case ELS_FLOGI:// ext. link service login - case ELS_LOGO: // FC-PH extended link service logout - case BLS_NOP: // Basic link service No OPeration - case ELS_PLOGI:// ext. link service login (PLOGI) - case ELS_PDISC:// ext. link service login (PDISC) - case ELS_PRLI: // ext. link service process login - - pExchange->fchs.ox_rx_id = ExchangeID; - pExchange->fchs.ox_rx_id <<= 16; // MSW shift - pExchange->fchs.ox_rx_id |= 0xffff; // and RX_ID - - break; - - - - - // RESPONDER types... we must set our RX_ID while preserving - // sender's OX_ID - // outgoing (or no) data - case ELS_RJT: // extended link service reject - case ELS_LOGO_ACC: // FC-PH extended link service logout accept - case ELS_ACC: // ext. generic link service accept - case ELS_PLOGI_ACC:// ext. link service login accept (PLOGI or PDISC) - case ELS_PRLI_ACC: // ext. link service process login accept - - CompleteExchange = TRUE; // Reply (ACC or RJT) is end of exchange - pExchange->fchs.ox_rx_id |= (ExchangeID & 0xFFFF); - - break; - - - // since we are a Responder, OX_ID should already be set by - // cpqfcTSBuildExchange(). We need to -OR- in RX_ID - case SCSI_TWE: - SestType = TRUE; - // Requirement: set MSB of x_ID for Incoming TL data - // (see "Tachyon TL/TS User's Manual", Rev 6.0, Sept.'98, pg. 50) - - pExchange->fchs.ox_rx_id &= 0xFFFF0000; // clear RX_ID - // Requirement: set MSB of RX_ID for Incoming TL data - // (see "Tachyon TL/TS User's Manual", Rev 6.0, Sept.'98, pg. 50) - pExchange->fchs.ox_rx_id |= (ExchangeID | 0x8000); - break; - - - case SCSI_TRE: - SestType = TRUE; - - // there is no XRDY for SEST target read; the data - // header needs to be updated. Also update the RSP - // exchange IDs for the status frame, in case it is sent automatically - fcChip->SEST->DataHDR[ ExchangeID ].ox_rx_id |= ExchangeID; - fcChip->SEST->RspHDR[ ExchangeID ].ox_rx_id = - fcChip->SEST->DataHDR[ ExchangeID ].ox_rx_id; - - // for easier FCP response logic (works for TWE and TRE), - // copy exchange IDs. (Not needed if TRE 'RSP' bit set) - pExchange->fchs.ox_rx_id = - fcChip->SEST->DataHDR[ ExchangeID ].ox_rx_id; - - break; - - - case FCP_RESPONSE: // using existing OX_ID/ RX_ID pair, - // start SFS FCP-RESPONSE frame - // OX/RX_ID should already be set! (See "fcBuild" above) - CompleteExchange = TRUE; // RSP is end of FCP-SCSI exchange - - - break; - - - case BLS_ABTS_RJT: // uses new RX_ID, since SEST x_ID non-existent - case BLS_ABTS_ACC: // using existing OX_ID/ RX_ID pair from SEST entry - CompleteExchange = TRUE; // ACC or RJT marks end of FCP-SCSI exchange - case BLS_ABTS: // using existing OX_ID/ RX_ID pair from SEST entry - - - break; - - - default: - printk("Error on fcStartExchange: undefined type %Xh(%d)\n", - pExchange->type, pExchange->type); - return INVALID_ARGS; - } - - - // X_ID fields are entered -- copy IRB to Tachyon's ERQ - - - memcpy( - &fcChip->ERQ->QEntry[ ErqIndex ], // dest. - &pExchange->IRB, - 32); // fixed (hardware) length! - - PCI_TRACEO( ExchangeID, 0xA0) - - // ACTION! May generate INT and IMQ entry - writel( fcChip->ERQ->producerIndex, - fcChip->Registers.ERQproducerIndex.address); - - - if( ExchangeID >= TACH_SEST_LEN ) // Link Service Outbound frame? - { - - // wait for completion! (TDB -- timeout and chip reset) - - - PCI_TRACEO( ExchangeID, 0xA4) - - enable_irq( cpqfcHBAdata->HostAdapter->irq); // only way to get Sem. - - down_interruptible( cpqfcHBAdata->TYOBcomplete); - - disable_irq( cpqfcHBAdata->HostAdapter->irq); - PCI_TRACE( 0xA4) - - // On login exchanges, BAD_ALPA (non-existent port_id) results in - // FTO (Frame Time Out) on the Outbound Completion message. - // If we got an FTO status, complete the exchange (free up slot) - if( CompleteExchange || // flag from Reply frames - pExchange->status ) // typically, can get FRAME_TO - { - cpqfcTSCompleteExchange( cpqfcHBAdata->PciDev, fcChip, ExchangeID); - } - } - - else // SEST Exchange - { - ulStatus = 0; // ship & pray success (e.g. FCP-SCSI) - - if( CompleteExchange ) // by Type of exchange (e.g. end-of-xchng) - { - cpqfcTSCompleteExchange( cpqfcHBAdata->PciDev, fcChip, ExchangeID); - } - - else - pExchange->status &= ~EXCHANGE_QUEUED; // clear ExchangeQueued flag - - } - } - - - else // ERQ 'producer' = 'consumer' and QUE is full - { - ulStatus = OUTQUE_FULL; // Outbound (ERQ) Que full - } - -Done: - PCI_TRACE( 0xA0) - return ulStatus; -} - - - - - -// Scan fcController->fcExchanges array for a usuable index (a "free" -// exchange). -// Inputs: -// fcChip - pointer to TachLite chip structure -// Return: -// index - exchange array element where exchange can be built -// -1 - exchange array is full -// REMARKS: -// Although this is a (yuk!) linear search, we presume -// that the system will complete exchanges about as quickly as -// they are submitted. A full Exchange array (and hence, max linear -// search time for free exchange slot) almost guarantees a Fibre problem -// of some sort. -// In the interest of making exchanges easier to debug, we want a LRU -// (Least Recently Used) scheme. - - -static LONG FindFreeExchange( PTACHYON fcChip, ULONG type ) -{ - FC_EXCHANGES *Exchanges = fcChip->Exchanges; - ULONG i; - ULONG ulStatus=-1; // assume failure - - - if( type == SCSI_IRE || - type == SCSI_TRE || - type == SCSI_IWE || - type == SCSI_TWE) - { - // SCSI type - X_IDs should be from 0 to TACH_SEST_LEN-1 - if( fcChip->fcSestExchangeLRU >= TACH_SEST_LEN) // rollover? - fcChip->fcSestExchangeLRU = 0; - i = fcChip->fcSestExchangeLRU; // typically it's already free! - - if( Exchanges->fcExchange[i].type == 0 ) // check for "free" element - { - ulStatus = 0; // success! - } - - else - { // YUK! we need to do a linear search for free element. - // Fragmentation of the fcExchange array is due to excessively - // long completions or timeouts. - - while( TRUE ) - { - if( ++i >= TACH_SEST_LEN ) // rollover check - i = 0; // beginning of SEST X_IDs - -// printk( "looping for SCSI xchng ID: i=%d, type=%Xh\n", -// i, Exchanges->fcExchange[i].type); - - if( Exchanges->fcExchange[i].type == 0 ) // "free"? - { - ulStatus = 0; // success! - break; - } - if( i == fcChip->fcSestExchangeLRU ) // wrapped-around array? - { - printk( "SEST X_ID space full\n"); - break; // failed - prevent inf. loop - } - } - } - fcChip->fcSestExchangeLRU = i + 1; // next! (rollover check next pass) - } - - - - else // Link Service type - X_IDs should be from TACH_SEST_LEN - // to TACH_MAX_XID - { - if( fcChip->fcLsExchangeLRU >= TACH_MAX_XID || // range check - fcChip->fcLsExchangeLRU < TACH_SEST_LEN ) // (e.g. startup) - fcChip->fcLsExchangeLRU = TACH_SEST_LEN; - - i = fcChip->fcLsExchangeLRU; // typically it's already free! - if( Exchanges->fcExchange[i].type == 0 ) // check for "free" element - { - ulStatus = 0; // success! - } - - else - { // YUK! we need to do a linear search for free element - // Fragmentation of the fcExchange array is due to excessively - // long completions or timeouts. - - while( TRUE ) - { - if( ++i >= TACH_MAX_XID ) // rollover check - i = TACH_SEST_LEN;// beginning of Link Service X_IDs - -// printk( "looping for xchng ID: i=%d, type=%Xh\n", -// i, Exchanges->fcExchange[i].type); - - if( Exchanges->fcExchange[i].type == 0 ) // "free"? - { - ulStatus = 0; // success! - break; - } - if( i == fcChip->fcLsExchangeLRU ) // wrapped-around array? - { - printk( "LinkService X_ID space full\n"); - break; // failed - prevent inf. loop - } - } - } - fcChip->fcLsExchangeLRU = i + 1; // next! (rollover check next pass) - - } - - if( !ulStatus ) // success? - Exchanges->fcExchange[i].type = type; // allocate it. - - else - i = -1; // error - all exchanges "open" - - return i; -} - -static void -cpqfc_pci_unmap_extended_sg(struct pci_dev *pcidev, - PTACHYON fcChip, - ULONG x_ID) -{ - // Unmaps the memory regions used to hold the scatter gather lists - - PSGPAGES i; - - // Were there any such regions needing unmapping? - if (! USES_EXTENDED_SGLIST(fcChip->SEST, x_ID)) - return; // No such regions, we're outta here. - - // for each extended scatter gather region needing unmapping... - for (i=fcChip->SEST->sgPages[x_ID] ; i != NULL ; i = i->next) - pci_unmap_single(pcidev, i->busaddr, i->maplen, - PCI_DMA_TODEVICE); -} - -// Called also from cpqfcTScontrol.o, so can't be static -void -cpqfc_pci_unmap(struct pci_dev *pcidev, - Scsi_Cmnd *cmd, - PTACHYON fcChip, - ULONG x_ID) -{ - // Undo the DMA mappings - if (cmd->use_sg) { // Used scatter gather list for data buffer? - cpqfc_pci_unmap_extended_sg(pcidev, fcChip, x_ID); - pci_unmap_sg(pcidev, cmd->buffer, cmd->use_sg, - cmd->sc_data_direction); - // printk("umsg %d\n", cmd->use_sg); - } - else if (cmd->request_bufflen) { - // printk("ums %p ", fcChip->SEST->u[ x_ID ].IWE.GAddr1); - pci_unmap_single(pcidev, fcChip->SEST->u[ x_ID ].IWE.GAddr1, - cmd->request_bufflen, - cmd->sc_data_direction); - } -} - -// We call this routine to free an Exchange for any reason: -// completed successfully, completed with error, aborted, etc. - -// returns FALSE if Exchange failed and "retry" is acceptable -// returns TRUE if Exchange was successful, or retry is impossible -// (e.g. port/device gone). -//scompleteexchange - -void cpqfcTSCompleteExchange( - struct pci_dev *pcidev, - PTACHYON fcChip, - ULONG x_ID) -{ - FC_EXCHANGES *Exchanges = fcChip->Exchanges; - int already_unmapped = 0; - - if( x_ID < TACH_SEST_LEN ) // SEST-based (or LinkServ for FCP exchange) - { - if( Exchanges->fcExchange[ x_ID ].Cmnd == NULL ) // what#@! - { -// TriggerHBA( fcChip->Registers.ReMapMemBase, 0); - printk(" x_ID %Xh, type %Xh, NULL ptr!\n", x_ID, - Exchanges->fcExchange[ x_ID ].type); - - goto CleanUpSestResources; // this path should be very rare. - } - - // we have Linux Scsi Cmnd ptr..., now check our Exchange status - // to decide how to complete this SEST FCP exchange - - if( Exchanges->fcExchange[ x_ID ].status ) // perhaps a Tach indicated problem, - // or abnormal exchange completion - { - // set FCP Link statistics - - if( Exchanges->fcExchange[ x_ID ].status & FC2_TIMEOUT) - fcChip->fcStats.timeouts++; - if( Exchanges->fcExchange[ x_ID ].status & INITIATOR_ABORT) - fcChip->fcStats.FC4aborted++; - if( Exchanges->fcExchange[ x_ID ].status & COUNT_ERROR) - fcChip->fcStats.CntErrors++; - if( Exchanges->fcExchange[ x_ID ].status & LINKFAIL_TX) - fcChip->fcStats.linkFailTX++; - if( Exchanges->fcExchange[ x_ID ].status & LINKFAIL_RX) - fcChip->fcStats.linkFailRX++; - if( Exchanges->fcExchange[ x_ID ].status & OVERFLOW) - fcChip->fcStats.CntErrors++; - - // First, see if the Scsi upper level initiated an ABORT on this - // exchange... - if( Exchanges->fcExchange[ x_ID ].status == INITIATOR_ABORT ) - { - printk(" DID_ABORT, x_ID %Xh, Cmnd %p ", - x_ID, Exchanges->fcExchange[ x_ID ].Cmnd); - goto CleanUpSestResources; // (we don't expect Linux _aborts) - } - - // Did our driver timeout the Exchange, or did Tachyon indicate - // a failure during transmission? Ask for retry with "SOFT_ERROR" - else if( Exchanges->fcExchange[ x_ID ].status & FC2_TIMEOUT) - { -// printk("result DID_SOFT_ERROR, x_ID %Xh, Cmnd %p\n", -// x_ID, Exchanges->fcExchange[ x_ID ].Cmnd); - Exchanges->fcExchange[ x_ID ].Cmnd->result = (DID_SOFT_ERROR <<16); - } - - // Did frame(s) for an open exchange arrive in the SFQ, - // meaning the SEST was unable to process them? - else if( Exchanges->fcExchange[ x_ID ].status & SFQ_FRAME) - { -// printk("result DID_SOFT_ERROR, x_ID %Xh, Cmnd %p\n", -// x_ID, Exchanges->fcExchange[ x_ID ].Cmnd); - Exchanges->fcExchange[ x_ID ].Cmnd->result = (DID_SOFT_ERROR <<16); - } - - // Did our driver timeout the Exchange, or did Tachyon indicate - // a failure during transmission? Ask for retry with "SOFT_ERROR" - else if( - (Exchanges->fcExchange[ x_ID ].status & LINKFAIL_TX) || - (Exchanges->fcExchange[ x_ID ].status & PORTID_CHANGED) || - (Exchanges->fcExchange[ x_ID ].status & FRAME_TO) || - (Exchanges->fcExchange[ x_ID ].status & INV_ENTRY) || - (Exchanges->fcExchange[ x_ID ].status & ABORTSEQ_NOTIFY) ) - - - { -// printk("result DID_SOFT_ERROR, x_ID %Xh, Cmnd %p\n", -// x_ID, Exchanges->fcExchange[ x_ID ].Cmnd); - Exchanges->fcExchange[ x_ID ].Cmnd->result = (DID_SOFT_ERROR <<16); - - - } - - // e.g., a LOGOut happened, or device never logged back in. - else if( Exchanges->fcExchange[ x_ID ].status & DEVICE_REMOVED) - { -// printk(" *LOGOut or timeout on login!* "); - // trigger? -// TriggerHBA( fcChip->Registers.ReMapMemBase, 0); - - Exchanges->fcExchange[ x_ID ].Cmnd->result = (DID_BAD_TARGET <<16); - } - - - // Did Tachyon indicate a CNT error? We need further analysis - // to determine if the exchange is acceptable - else if( Exchanges->fcExchange[ x_ID ].status == COUNT_ERROR) - { - UCHAR ScsiStatus; - FCP_STATUS_RESPONSE *pFcpStatus = - (PFCP_STATUS_RESPONSE)&fcChip->SEST->RspHDR[ x_ID ].pl; - - ScsiStatus = pFcpStatus->fcp_status >>24; - - // If the command is a SCSI Read/Write type, we don't tolerate - // count errors of any kind; assume the count error is due to - // a dropped frame and ask for retry... - - if(( (Exchanges->fcExchange[ x_ID ].Cmnd->cmnd[0] == 0x8) || - (Exchanges->fcExchange[ x_ID ].Cmnd->cmnd[0] == 0x28) || - (Exchanges->fcExchange[ x_ID ].Cmnd->cmnd[0] == 0xA) || - (Exchanges->fcExchange[ x_ID ].Cmnd->cmnd[0] == 0x2A) ) - && - ScsiStatus == 0 ) - { - // ask for retry -/* printk("COUNT_ERROR retry, x_ID %Xh, status %Xh, Cmnd %p\n", - x_ID, Exchanges->fcExchange[ x_ID ].status, - Exchanges->fcExchange[ x_ID ].Cmnd);*/ - Exchanges->fcExchange[ x_ID ].Cmnd->result = (DID_SOFT_ERROR <<16); - } - - else // need more analysis - { - cpqfcTSCheckandSnoopFCP(fcChip, x_ID); // (will set ->result) - } - } - - // default: NOTE! We don't ever want to get here. Getting here - // implies something new is happening that we've never had a test - // case for. Need code maintenance! Return "ERROR" - else - { - unsigned int stat = Exchanges->fcExchange[ x_ID ].status; - printk("DEFAULT result %Xh, x_ID %Xh, Cmnd %p", - Exchanges->fcExchange[ x_ID ].status, x_ID, - Exchanges->fcExchange[ x_ID ].Cmnd); - - if (stat & INVALID_ARGS) printk(" INVALID_ARGS "); - if (stat & LNKDWN_OSLS) printk(" LNKDWN_OSLS "); - if (stat & LNKDWN_LASER) printk(" LNKDWN_LASER "); - if (stat & OUTQUE_FULL) printk(" OUTQUE_FULL "); - if (stat & DRIVERQ_FULL) printk(" DRIVERQ_FULL "); - if (stat & SEST_FULL) printk(" SEST_FULL "); - if (stat & BAD_ALPA) printk(" BAD_ALPA "); - if (stat & OVERFLOW) printk(" OVERFLOW "); - if (stat & COUNT_ERROR) printk(" COUNT_ERROR "); - if (stat & LINKFAIL_RX) printk(" LINKFAIL_RX "); - if (stat & ABORTSEQ_NOTIFY) printk(" ABORTSEQ_NOTIFY "); - if (stat & LINKFAIL_TX) printk(" LINKFAIL_TX "); - if (stat & HOSTPROG_ERR) printk(" HOSTPROG_ERR "); - if (stat & FRAME_TO) printk(" FRAME_TO "); - if (stat & INV_ENTRY) printk(" INV_ENTRY "); - if (stat & SESTPROG_ERR) printk(" SESTPROG_ERR "); - if (stat & OUTBOUND_TIMEOUT) printk(" OUTBOUND_TIMEOUT "); - if (stat & INITIATOR_ABORT) printk(" INITIATOR_ABORT "); - if (stat & MEMPOOL_FAIL) printk(" MEMPOOL_FAIL "); - if (stat & FC2_TIMEOUT) printk(" FC2_TIMEOUT "); - if (stat & TARGET_ABORT) printk(" TARGET_ABORT "); - if (stat & EXCHANGE_QUEUED) printk(" EXCHANGE_QUEUED "); - if (stat & PORTID_CHANGED) printk(" PORTID_CHANGED "); - if (stat & DEVICE_REMOVED) printk(" DEVICE_REMOVED "); - if (stat & SFQ_FRAME) printk(" SFQ_FRAME "); - printk("\n"); - - Exchanges->fcExchange[ x_ID ].Cmnd->result = (DID_ERROR <<16); - } - } - else // definitely no Tach problem, but perhaps an FCP problem - { - // set FCP Link statistic - fcChip->fcStats.ok++; - cpqfcTSCheckandSnoopFCP( fcChip, x_ID); // (will set ->result) - } - - cpqfc_pci_unmap(pcidev, Exchanges->fcExchange[x_ID].Cmnd, - fcChip, x_ID); // undo DMA mappings. - already_unmapped = 1; - - // OK, we've set the Scsi "->result" field, so proceed with calling - // Linux Scsi "done" (if not NULL), and free any kernel memory we - // may have allocated for the exchange. - - PCI_TRACEO( (ULONG)Exchanges->fcExchange[x_ID].Cmnd, 0xAC); - // complete the command back to upper Scsi drivers - if( Exchanges->fcExchange[ x_ID ].Cmnd->scsi_done != NULL) - { - // Calling "done" on an Linux _abort() aborted - // Cmnd causes a kernel panic trying to re-free mem. - // Actually, we shouldn't do anything with an _abort CMND - if( Exchanges->fcExchange[ x_ID ].Cmnd->result != (DID_ABORT<<16) ) - { - PCI_TRACE(0xAC) - call_scsi_done(Exchanges->fcExchange[ x_ID ].Cmnd); - } - else - { -// printk(" not calling scsi_done on x_ID %Xh, Cmnd %p\n", -// x_ID, Exchanges->fcExchange[ x_ID ].Cmnd); - } - } - else{ - printk(" x_ID %Xh, type %Xh, Cdb0 %Xh\n", x_ID, - Exchanges->fcExchange[ x_ID ].type, - Exchanges->fcExchange[ x_ID ].Cmnd->cmnd[0]); - printk(" cpqfcTS: Null scsi_done function pointer!\n"); - } - - - // Now, clean up non-Scsi_Cmnd items... -CleanUpSestResources: - - if (!already_unmapped) - cpqfc_pci_unmap(pcidev, Exchanges->fcExchange[x_ID].Cmnd, - fcChip, x_ID); // undo DMA mappings. - - // Was an Extended Scatter/Gather page allocated? We know - // this by checking DWORD 4, bit 31 ("LOC") of SEST entry - if( !(fcChip->SEST->u[ x_ID ].IWE.Buff_Off & 0x80000000)) - { - PSGPAGES p, next; - - // extended S/G list was used -- Free the allocated ext. S/G pages - for (p = fcChip->SEST->sgPages[x_ID]; p != NULL; p = next) { - next = p->next; - kfree(p); - } - fcChip->SEST->sgPages[x_ID] = NULL; - } - - Exchanges->fcExchange[ x_ID ].Cmnd = NULL; - } // Done with FCP (SEST) exchanges - - - // the remaining logic is common to ALL Exchanges: - // FCP(SEST) and LinkServ. - - Exchanges->fcExchange[ x_ID ].type = 0; // there -- FREE! - Exchanges->fcExchange[ x_ID ].status = 0; - - PCI_TRACEO( x_ID, 0xAC) - - - return; -} // (END of CompleteExchange function) - - - - -// Unfortunately, we must snoop all command completions in -// order to manipulate certain return fields, and take note of -// device types, etc., to facilitate the Fibre-Channel to SCSI -// "mapping". -// (Watch for BIG Endian confusion on some payload fields) -void cpqfcTSCheckandSnoopFCP( PTACHYON fcChip, ULONG x_ID) -{ - FC_EXCHANGES *Exchanges = fcChip->Exchanges; - Scsi_Cmnd *Cmnd = Exchanges->fcExchange[ x_ID].Cmnd; - FCP_STATUS_RESPONSE *pFcpStatus = - (PFCP_STATUS_RESPONSE)&fcChip->SEST->RspHDR[ x_ID ].pl; - UCHAR ScsiStatus; - - ScsiStatus = pFcpStatus->fcp_status >>24; - -#ifdef FCP_COMPLETION_DBG - printk("ScsiStatus = 0x%X\n", ScsiStatus); -#endif - - // First, check FCP status - if( pFcpStatus->fcp_status & FCP_RSP_LEN_VALID ) - { - // check response code (RSP_CODE) -- most popular is bad len - // 1st 4 bytes of rsp info -- only byte 3 interesting - if( pFcpStatus->fcp_rsp_info & FCP_DATA_LEN_NOT_BURST_LEN ) - { - - // do we EVER get here? - printk("cpqfcTS: FCP data len not burst len, x_ID %Xh\n", x_ID); - } - } - - // for now, go by the ScsiStatus, and manipulate certain - // commands when necessary... - if( ScsiStatus == 0) // SCSI status byte "good"? - { - Cmnd->result = 0; // everything's OK - - if( (Cmnd->cmnd[0] == INQUIRY)) - { - UCHAR *InquiryData = Cmnd->request_buffer; - PFC_LOGGEDIN_PORT pLoggedInPort; - - // We need to manipulate INQUIRY - // strings for COMPAQ RAID controllers to force - // Linux to scan additional LUNs. Namely, set - // the Inquiry string byte 2 (ANSI-approved version) - // to 2. - - if( !memcmp( &InquiryData[8], "COMPAQ", 6 )) - { - InquiryData[2] = 0x2; // claim SCSI-2 compliance, - // so multiple LUNs may be scanned. - // (no SCSI-2 problems known in CPQ) - } - - // snoop the Inquiry to detect Disk, Tape, etc. type - // (search linked list for the port_id we sent INQUIRY to) - pLoggedInPort = fcFindLoggedInPort( fcChip, - NULL, // DON'T search Scsi Nexus (we will set it) - Exchanges->fcExchange[ x_ID].fchs.d_id & 0xFFFFFF, - NULL, // DON'T search linked list for FC WWN - NULL); // DON'T care about end of list - - if( pLoggedInPort ) - { - pLoggedInPort->ScsiNexus.InqDeviceType = InquiryData[0]; - } - else - { - printk("cpqfcTS: can't find LoggedIn FC port %06X for INQUIRY\n", - Exchanges->fcExchange[ x_ID].fchs.d_id & 0xFFFFFF); - } - } - } - - - // Scsi Status not good -- pass it back to caller - - else - { - Cmnd->result = ScsiStatus; // SCSI status byte is 1st - - // check for valid "sense" data - - if( pFcpStatus->fcp_status & FCP_SNS_LEN_VALID ) - { // limit Scsi Sense field length! - int SenseLen = pFcpStatus->fcp_sns_len >>24; // (BigEndian) lower byte - - SenseLen = SenseLen > sizeof( Cmnd->sense_buffer) ? - sizeof( Cmnd->sense_buffer) : SenseLen; - - -#ifdef FCP_COMPLETION_DBG - printk("copy sense_buffer %p, len %d, result %Xh\n", - Cmnd->sense_buffer, SenseLen, Cmnd->result); -#endif - - // NOTE: There is some dispute over the FCP response - // format. Most FC devices assume that FCP_RSP_INFO - // is 8 bytes long, in spite of the fact that FCP_RSP_LEN - // is (virtually) always 0 and the field is "invalid". - // Some other devices assume that - // the FCP_SNS_INFO begins after FCP_RSP_LEN bytes (i.e. 0) - // when the FCP_RSP is invalid (this almost appears to be - // one of those "religious" issues). - // Consequently, we test the usual position of FCP_SNS_INFO - // for 7Xh, since the SCSI sense format says the first - // byte ("error code") should be 0x70 or 0x71. In practice, - // we find that every device does in fact have 0x70 or 0x71 - // in the first byte position, so this test works for all - // FC devices. - // (This logic is especially effective for the CPQ/DEC HSG80 - // & HSG60 controllers). - - if( (pFcpStatus->fcp_sns_info[0] & 0x70) == 0x70 ) - memcpy( Cmnd->sense_buffer, - &pFcpStatus->fcp_sns_info[0], SenseLen); - else - { - unsigned char *sbPtr = - (unsigned char *)&pFcpStatus->fcp_sns_info[0]; - sbPtr -= 8; // back up 8 bytes hoping to find the - // start of the sense buffer - memcpy( Cmnd->sense_buffer, sbPtr, SenseLen); - } - - // in the special case of Device Reset, tell upper layer - // to immediately retry (with SOFT_ERROR status) - // look for Sense Key Unit Attention (0x6) with ASC Device - // Reset (0x29) - // printk("SenseLen %d, Key = 0x%X, ASC = 0x%X\n", - // SenseLen, Cmnd->sense_buffer[2], - // Cmnd->sense_buffer[12]); - if( ((Cmnd->sense_buffer[2] & 0xF) == 0x6) && - (Cmnd->sense_buffer[12] == 0x29) ) // Sense Code "reset" - { - Cmnd->result |= (DID_SOFT_ERROR << 16); // "Host" status byte 3rd - } - - // check for SenseKey "HARDWARE ERROR", ASC InternalTargetFailure - else if( ((Cmnd->sense_buffer[2] & 0xF) == 0x4) && // "hardware error" - (Cmnd->sense_buffer[12] == 0x44) ) // Addtl. Sense Code - { -// printk("HARDWARE_ERROR, Channel/Target/Lun %d/%d/%d\n", -// Cmnd->channel, Cmnd->target, Cmnd->lun); - Cmnd->result |= (DID_ERROR << 16); // "Host" status byte 3rd - } - - } // (end of sense len valid) - - // there is no sense data to help out Linux's Scsi layers... - // We'll just return the Scsi status and hope he will "do the - // right thing" - else - { - // as far as we know, the Scsi status is sufficient - Cmnd->result |= (DID_OK << 16); // "Host" status byte 3rd - } - } -} - - - -//PPPPPPPPPPPPPPPPPPPPPPPPP PAYLOAD PPPPPPPPP -// build data PAYLOAD; SCSI FCP_CMND I.U. -// remember BIG ENDIAN payload - DWord values must be byte-reversed -// (hence the affinity for byte pointer building). - -static int build_FCP_payload( Scsi_Cmnd *Cmnd, - UCHAR* payload, ULONG type, ULONG fcp_dl ) -{ - int i; - - - switch( type) - { - - case SCSI_IWE: - case SCSI_IRE: - // 8 bytes FCP_LUN - // Peripheral Device or Volume Set addressing, and LUN mapping - // When the FC port was looked up, we copied address mode - // and any LUN mask to the scratch pad SCp.phase & .mode - - *payload++ = (UCHAR)Cmnd->SCp.phase; - - // Now, because of "lun masking" - // (aka selective storage presentation), - // the contiguous Linux Scsi lun number may not match the - // device's lun number, so we may have to "map". - - *payload++ = (UCHAR)Cmnd->SCp.have_data_in; - - // We don't know of anyone in the FC business using these - // extra "levels" of addressing. In fact, confusion still exists - // just using the FIRST level... ;-) - - *payload++ = 0; // 2nd level addressing - *payload++ = 0; - *payload++ = 0; // 3rd level addressing - *payload++ = 0; - *payload++ = 0; // 4th level addressing - *payload++ = 0; - - // 4 bytes Control Field FCP_CNTL - *payload++ = 0; // byte 0: (MSB) reserved - *payload++ = 0; // byte 1: task codes - - // byte 2: task management flags - // another "use" of the spare field to accomplish TDR - // note combination needed - if( (Cmnd->cmnd[0] == RELEASE) && - (Cmnd->SCp.buffers_residual == FCP_TARGET_RESET) ) - { - Cmnd->cmnd[0] = 0; // issue "Test Unit Ready" for TDR - *payload++ = 0x20; // target device reset bit - } - else - *payload++ = 0; // no TDR - // byte 3: (LSB) execution management codes - // bit 0 write, bit 1 read (don't set together) - - if( fcp_dl != 0 ) - { - if( type == SCSI_IWE ) // WRITE - *payload++ = 1; - else // READ - *payload++ = 2; - } - else - { - // On some devices, if RD or WR bits are set, - // and fcp_dl is 0, they will generate an error on the command. - // (i.e., if direction is specified, they insist on a length). - *payload++ = 0; // no data (necessary for CPQ) - } - - - // NOTE: clean this up if/when MAX_COMMAND_SIZE is increased to 16 - // FCP_CDB allows 16 byte SCSI command descriptor blk; - // Linux SCSI CDB array is MAX_COMMAND_SIZE (12 at this time...) - for( i=0; (i < Cmnd->cmd_len) && i < MAX_COMMAND_SIZE; i++) - *payload++ = Cmnd->cmnd[i]; - - // if( Cmnd->cmd_len == 16 ) - // { - // memcpy( payload, &Cmnd->SCp.buffers_residual, 4); - // } - payload+= (16 - i); - - // FCP_DL is largest number of expected data bytes - // per CDB (i.e. read/write command) - *payload++ = (UCHAR)(fcp_dl >>24); // (MSB) 8 bytes data len FCP_DL - *payload++ = (UCHAR)(fcp_dl >>16); - *payload++ = (UCHAR)(fcp_dl >>8); - *payload++ = (UCHAR)fcp_dl; // (LSB) - break; - - case SCSI_TWE: // need FCP_XFER_RDY - *payload++ = 0; // (4 bytes) DATA_RO (MSB byte 0) - *payload++ = 0; - *payload++ = 0; - *payload++ = 0; // LSB (byte 3) - // (4 bytes) BURST_LEN - // size of following FCP_DATA payload - *payload++ = (UCHAR)(fcp_dl >>24); // (MSB) 8 bytes data len FCP_DL - *payload++ = (UCHAR)(fcp_dl >>16); - *payload++ = (UCHAR)(fcp_dl >>8); - *payload++ = (UCHAR)fcp_dl; // (LSB) - // 4 bytes RESERVED - *payload++ = 0; - *payload++ = 0; - *payload++ = 0; - *payload++ = 0; - break; - - default: - break; - } - - return 0; -} - |