csiostor: Header file modifications for chip support and bug fixes.

This patch defines the common operations to support multiple chips. It
includes common header file modifications to support the current chips
(T4 and T5). It also includes the following bug fixes:
- reconfirms the rnode state after an implicit logo.
- corrects the stats array size.
- sets up and checks flags correctly when coming up as master and finding
the card initialized

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Arvind Bhushan <arvindb@chelsio.com>
Signed-off-by: Naresh Kumar Inna <naresh@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 26 insertions, 15 deletions

diff --git a/drivers/scsi/csiostor/csio_wr.c b/drivers/scsi/csiostor/csio_wr.c
index c32df1bdaa9..713e77d12cb 100644
--- a/drivers/scsi/csiostor/csio_wr.c
+++ b/drivers/scsi/csiostor/csio_wr.c
@@ -1331,14 +1331,21 @@ csio_wr_fixup_host_params(struct csio_hw *hw)
 
 	/* FL BUFFER SIZE#0 is Page size i,e already aligned to cache line */
 	csio_wr_reg32(hw, PAGE_SIZE, SGE_FL_BUFFER_SIZE0);
-	csio_wr_reg32(hw,
-		      (csio_rd_reg32(hw, SGE_FL_BUFFER_SIZE2) +
-		      sge->csio_fl_align - 1) & ~(sge->csio_fl_align - 1),
-		      SGE_FL_BUFFER_SIZE2);
-	csio_wr_reg32(hw,
-		      (csio_rd_reg32(hw, SGE_FL_BUFFER_SIZE3) +
-		      sge->csio_fl_align - 1) & ~(sge->csio_fl_align - 1),
-		      SGE_FL_BUFFER_SIZE3);
+
+	/*
+	 * If using hard params, the following will get set correctly
+	 * in csio_wr_set_sge().
+	 */
+	if (hw->flags & CSIO_HWF_USING_SOFT_PARAMS) {
+		csio_wr_reg32(hw,
+			(csio_rd_reg32(hw, SGE_FL_BUFFER_SIZE2) +
+			sge->csio_fl_align - 1) & ~(sge->csio_fl_align - 1),
+			SGE_FL_BUFFER_SIZE2);
+		csio_wr_reg32(hw,
+			(csio_rd_reg32(hw, SGE_FL_BUFFER_SIZE3) +
+			sge->csio_fl_align - 1) & ~(sge->csio_fl_align - 1),
+			SGE_FL_BUFFER_SIZE3);
+	}
 
 	csio_wr_reg32(hw, HPZ0(PAGE_SHIFT - 12), ULP_RX_TDDP_PSZ);
 
@@ -1470,8 +1477,10 @@ csio_wr_set_sge(struct csio_hw *hw)
 	/* SGE_FL_BUFFER_SIZE0 is set up by csio_wr_fixup_host_params(). */
 
 	CSIO_SET_FLBUF_SIZE(hw, 1, CSIO_SGE_FLBUF_SIZE1);
-	CSIO_SET_FLBUF_SIZE(hw, 2, CSIO_SGE_FLBUF_SIZE2);
-	CSIO_SET_FLBUF_SIZE(hw, 3, CSIO_SGE_FLBUF_SIZE3);
+	csio_wr_reg32(hw, (CSIO_SGE_FLBUF_SIZE2 + sge->csio_fl_align - 1)
+		      & ~(sge->csio_fl_align - 1), SGE_FL_BUFFER_SIZE2);
+	csio_wr_reg32(hw, (CSIO_SGE_FLBUF_SIZE3 + sge->csio_fl_align - 1)
+		      & ~(sge->csio_fl_align - 1), SGE_FL_BUFFER_SIZE3);
 	CSIO_SET_FLBUF_SIZE(hw, 4, CSIO_SGE_FLBUF_SIZE4);
 	CSIO_SET_FLBUF_SIZE(hw, 5, CSIO_SGE_FLBUF_SIZE5);
 	CSIO_SET_FLBUF_SIZE(hw, 6, CSIO_SGE_FLBUF_SIZE6);
@@ -1522,22 +1531,24 @@ void
 csio_wr_sge_init(struct csio_hw *hw)
 {
 	/*
-	 * If we are master:
+	 * If we are master and chip is not initialized:
 	 *    - If we plan to use the config file, we need to fixup some
 	 *      host specific registers, and read the rest of the SGE
 	 *      configuration.
 	 *    - If we dont plan to use the config file, we need to initialize
 	 *      SGE entirely, including fixing the host specific registers.
+	 * If we are master and chip is initialized, just read and work off of
+	 *	the already initialized SGE values.
 	 * If we arent the master, we are only allowed to read and work off of
 	 *      the already initialized SGE values.
 	 *
 	 * Therefore, before calling this function, we assume that the master-
-	 * ship of the card, and whether to use config file or not, have
-	 * already been decided. In other words, CSIO_HWF_USING_SOFT_PARAMS and
-	 * CSIO_HWF_MASTER should be set/unset.
+	 * ship of the card, state and whether to use config file or not, have
+	 * already been decided.
 	 */
 	if (csio_is_hw_master(hw)) {
-		csio_wr_fixup_host_params(hw);
+		if (hw->fw_state != CSIO_DEV_STATE_INIT)
+			csio_wr_fixup_host_params(hw);
 
 		if (hw->flags & CSIO_HWF_USING_SOFT_PARAMS)
 			csio_wr_get_sge(hw);