[SCSI] isci: fix io failures while wide port links are coming up

When the first phy of a wide port comes up, don't report the port ready
yet, always wait for 250 miliseconds then config the port with all phys
added to the port. So that we can avoid reporting wide port device too
early to kernel, which caused the first IOs (report luns, inquirys)
failed due to not all the phys are configured into its port. Changes
also made that the phys in a wide port don't need to go through half
second wait time for consuming power.

Signed-off-by: Marcin Tomczak <marcin.tomczak@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

1 files changed, 55 insertions, 4 deletions

diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c
index 7e4d709dc20..1a65d651423 100644
--- a/drivers/scsi/isci/host.c
+++ b/drivers/scsi/isci/host.c
@@ -899,7 +899,8 @@ static enum sci_status sci_controller_start_next_phy(struct isci_host *ihost)
 			 */
 			if ((iphy->is_in_link_training == false && state == SCI_PHY_INITIAL) ||
 			    (iphy->is_in_link_training == false && state == SCI_PHY_STOPPED) ||
-			    (iphy->is_in_link_training == true && is_phy_starting(iphy))) {
+			    (iphy->is_in_link_training == true && is_phy_starting(iphy)) ||
+			    (ihost->port_agent.phy_ready_mask != ihost->port_agent.phy_configured_mask)) {
 				is_controller_start_complete = false;
 				break;
 			}
@@ -1904,6 +1905,31 @@ static void power_control_timeout(unsigned long data)
 		ihost->power_control.phys_waiting--;
 		ihost->power_control.phys_granted_power++;
 		sci_phy_consume_power_handler(iphy);
+
+		if (iphy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) {
+			u8 j;
+
+			for (j = 0; j < SCI_MAX_PHYS; j++) {
+				struct isci_phy *requester = ihost->power_control.requesters[j];
+
+				/*
+				 * Search the power_control queue to see if there are other phys
+				 * attached to the same remote device. If found, take all of
+				 * them out of await_sas_power state.
+				 */
+				if (requester != NULL && requester != iphy) {
+					u8 other = memcmp(requester->frame_rcvd.iaf.sas_addr,
+							  iphy->frame_rcvd.iaf.sas_addr,
+							  sizeof(requester->frame_rcvd.iaf.sas_addr));
+
+					if (other == 0) {
+						ihost->power_control.requesters[j] = NULL;
+						ihost->power_control.phys_waiting--;
+						sci_phy_consume_power_handler(requester);
+					}
+				}
+			}
+		}
 	}
 
 	/*
@@ -1938,9 +1964,34 @@ void sci_controller_power_control_queue_insert(struct isci_host *ihost,
 		ihost->power_control.timer_started = true;
 
 	} else {
-		/* Add the phy in the waiting list */
-		ihost->power_control.requesters[iphy->phy_index] = iphy;
-		ihost->power_control.phys_waiting++;
+		/*
+		 * There are phys, attached to the same sas address as this phy, are
+		 * already in READY state, this phy don't need wait.
+		 */
+		u8 i;
+		struct isci_phy *current_phy;
+
+		for (i = 0; i < SCI_MAX_PHYS; i++) {
+			u8 other;
+			current_phy = &ihost->phys[i];
+
+			other = memcmp(current_phy->frame_rcvd.iaf.sas_addr,
+				       iphy->frame_rcvd.iaf.sas_addr,
+				       sizeof(current_phy->frame_rcvd.iaf.sas_addr));
+
+			if (current_phy->sm.current_state_id == SCI_PHY_READY &&
+			    current_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS &&
+			    other == 0) {
+				sci_phy_consume_power_handler(iphy);
+				break;
+			}
+		}
+
+		if (i == SCI_MAX_PHYS) {
+			/* Add the phy in the waiting list */
+			ihost->power_control.requesters[iphy->phy_index] = iphy;
+			ihost->power_control.phys_waiting++;
+		}
 	}
 }