Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull first round of SCSI updates from James Bottomley:
 "This is a large set of updates, mostly for drivers (qla2xxx [including
  support for new 83xx based card], qla4xxx, mpt2sas, bfa, zfcp, hpsa,
  be2iscsi, isci, lpfc, ipr, ibmvfc, ibmvscsi, megaraid_sas).

  There's also a rework for tape adding virtually unlimited numbers of
  tape drives plus a set of dif fixes for sd and a fix for a live lock
  on hot remove of SCSI devices.

  This round includes a signed tag pull of isci-for-3.6

  Signed-off-by: James Bottomley <JBottomley@Parallels.com>"

Fix up trivial conflict in drivers/scsi/qla2xxx/qla_nx.c due to new PCI
helper function use in a function that was removed by this pull.

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (198 commits)
  [SCSI] st: remove st_mutex
  [SCSI] sd: Ensure we correctly disable devices with unknown protection type
  [SCSI] hpsa: gen8plus Smart Array IDs
  [SCSI] qla4xxx: Update driver version to 5.03.00-k1
  [SCSI] qla4xxx: Disable generating pause frames for ISP83XX
  [SCSI] qla4xxx: Fix double clearing of risc_intr for ISP83XX
  [SCSI] qla4xxx: IDC implementation for Loopback
  [SCSI] qla4xxx: update copyrights in LICENSE.qla4xxx
  [SCSI] qla4xxx: Fix panic while rmmod
  [SCSI] qla4xxx: Fail probe_adapter if IRQ allocation fails
  [SCSI] qla4xxx: Prevent MSI/MSI-X falling back to INTx for ISP82XX
  [SCSI] qla4xxx: Update idc reg in case of PCI AER
  [SCSI] qla4xxx: Fix double IDC locking in qla4_8xxx_error_recovery
  [SCSI] qla4xxx: Clear interrupt while unloading driver for ISP83XX
  [SCSI] qla4xxx: Print correct IDC version
  [SCSI] qla4xxx: Added new mbox cmd to pass driver version to FW
  [SCSI] scsi_dh_alua: Enable STPG for unavailable ports
  [SCSI] scsi_remove_target: fix softlockup regression on hot remove
  [SCSI] ibmvscsi: Fix host config length field overflow
  [SCSI] ibmvscsi: Remove backend abstraction
  ...

1 files changed, 57 insertions, 2 deletions

diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c
index 9be45a2b223..b74050b95d6 100644
--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -156,7 +156,7 @@ static struct scsi_host_template isci_sht = {
 	.target_alloc			= sas_target_alloc,
 	.slave_configure		= sas_slave_configure,
 	.scan_finished			= isci_host_scan_finished,
-	.scan_start			= isci_host_scan_start,
+	.scan_start			= isci_host_start,
 	.change_queue_depth		= sas_change_queue_depth,
 	.change_queue_type		= sas_change_queue_type,
 	.bios_param			= sas_bios_param,
@@ -644,7 +644,6 @@ static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_devic
 						orom->hdr.version)) {
 			dev_warn(&pdev->dev,
 				 "[%d]: invalid oem parameters detected, falling back to firmware\n", i);
-			devm_kfree(&pdev->dev, orom);
 			orom = NULL;
 			break;
 		}
@@ -722,11 +721,67 @@ static void __devexit isci_pci_remove(struct pci_dev *pdev)
 	}
 }
 
+#ifdef CONFIG_PM
+static int isci_suspend(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct isci_host *ihost;
+	int i;
+
+	for_each_isci_host(i, ihost, pdev) {
+		sas_suspend_ha(&ihost->sas_ha);
+		isci_host_deinit(ihost);
+	}
+
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, PCI_D3hot);
+
+	return 0;
+}
+
+static int isci_resume(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct isci_host *ihost;
+	int rc, i;
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+
+	rc = pcim_enable_device(pdev);
+	if (rc) {
+		dev_err(&pdev->dev,
+			"enabling device failure after resume(%d)\n", rc);
+		return rc;
+	}
+
+	pci_set_master(pdev);
+
+	for_each_isci_host(i, ihost, pdev) {
+		sas_prep_resume_ha(&ihost->sas_ha);
+
+		isci_host_init(ihost);
+		isci_host_start(ihost->sas_ha.core.shost);
+		wait_for_start(ihost);
+
+		sas_resume_ha(&ihost->sas_ha);
+	}
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(isci_pm_ops, isci_suspend, isci_resume);
+#endif
+
 static struct pci_driver isci_pci_driver = {
 	.name		= DRV_NAME,
 	.id_table	= isci_id_table,
 	.probe		= isci_pci_probe,
 	.remove		= __devexit_p(isci_pci_remove),
+#ifdef CONFIG_PM
+	.driver.pm      = &isci_pm_ops,
+#endif
 };
 
 static __init int isci_init(void)