isci: uplevel port infrastructure

* Move port configuration agent implementation
* Merge core/scic_sds_port.[ch] into port.[ch]

Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

1 files changed, 2391 insertions, 60 deletions

diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c
index 321935d9560..dbff28396dd 100644
--- a/drivers/scsi/isci/port.c
+++ b/drivers/scsi/isci/port.c
@@ -53,11 +53,13 @@
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-#include <linux/workqueue.h>
 #include "isci.h"
-#include "scic_port.h"
 #include "port.h"
 #include "request.h"
+#include "timers.h"
+
+#define SCIC_SDS_PORT_HARD_RESET_TIMEOUT  (1000)
+#define SCU_DUMMY_INDEX    (0xFFFF)
 
 static void isci_port_change_state(struct isci_port *iport, enum isci_status status)
 {
@@ -73,44 +75,87 @@ static void isci_port_change_state(struct isci_port *iport, enum isci_status sta
 	spin_unlock_irqrestore(&iport->state_lock, flags);
 }
 
-void isci_port_init(struct isci_port *iport, struct isci_host *ihost, int index)
+/*
+ * This function will indicate which protocols are supported by this port.
+ * @sci_port: a handle corresponding to the SAS port for which to return the
+ *    supported protocols.
+ * @protocols: This parameter specifies a pointer to a data structure
+ *    which the core will copy the protocol values for the port from the
+ *    transmit_identification register.
+ */
+static void
+scic_sds_port_get_protocols(struct scic_sds_port *sci_port,
+			    struct scic_phy_proto *protocols)
 {
-	INIT_LIST_HEAD(&iport->remote_dev_list);
-	INIT_LIST_HEAD(&iport->domain_dev_list);
-	spin_lock_init(&iport->state_lock);
-	init_completion(&iport->start_complete);
-	iport->isci_host = ihost;
-	isci_port_change_state(iport, isci_freed);
+	u8 index;
+
+	protocols->all = 0;
+
+	for (index = 0; index < SCI_MAX_PHYS; index++) {
+		if (sci_port->phy_table[index] != NULL) {
+			scic_sds_phy_get_protocols(sci_port->phy_table[index],
+						   protocols);
+		}
+	}
 }
 
 /**
- * isci_port_get_state() - This function gets the status of the port object.
- * @isci_port: This parameter points to the isci_port object
+ * This method requests a list (mask) of the phys contained in the supplied SAS
+ *    port.
+ * @sci_port: a handle corresponding to the SAS port for which to return the
+ *    phy mask.
  *
- * status of the object as a isci_status enum.
+ * Return a bit mask indicating which phys are a part of this port. Each bit
+ * corresponds to a phy identifier (e.g. bit 0 = phy id 0).
  */
-enum isci_status isci_port_get_state(
-	struct isci_port *isci_port)
+static u32 scic_sds_port_get_phys(struct scic_sds_port *sci_port)
 {
-	return isci_port->status;
+	u32 index;
+	u32 mask;
+
+	mask = 0;
+
+	for (index = 0; index < SCI_MAX_PHYS; index++) {
+		if (sci_port->phy_table[index] != NULL) {
+			mask |= (1 << index);
+		}
+	}
+
+	return mask;
 }
 
-void isci_port_bc_change_received(struct isci_host *ihost,
-				  struct scic_sds_port *sci_port,
-				  struct scic_sds_phy *sci_phy)
+/**
+ * scic_port_get_properties() - This method simply returns the properties
+ *    regarding the port, such as: physical index, protocols, sas address, etc.
+ * @port: this parameter specifies the port for which to retrieve the physical
+ *    index.
+ * @properties: This parameter specifies the properties structure into which to
+ *    copy the requested information.
+ *
+ * Indicate if the user specified a valid port. SCI_SUCCESS This value is
+ * returned if the specified port was valid. SCI_FAILURE_INVALID_PORT This
+ * value is returned if the specified port is not valid.  When this value is
+ * returned, no data is copied to the properties output parameter.
+ */
+static enum sci_status scic_port_get_properties(struct scic_sds_port *port,
+						struct scic_port_properties *prop)
 {
-	struct isci_phy *iphy = sci_phy_to_iphy(sci_phy);
+	if ((port == NULL) ||
+	    (port->logical_port_index == SCIC_SDS_DUMMY_PORT))
+		return SCI_FAILURE_INVALID_PORT;
 
-	dev_dbg(&ihost->pdev->dev, "%s: iphy = %p, sas_phy = %p\n",
-		__func__, iphy, &iphy->sas_phy);
+	prop->index    = port->logical_port_index;
+	prop->phy_mask = scic_sds_port_get_phys(port);
+	scic_sds_port_get_sas_address(port, &prop->local.sas_address);
+	scic_sds_port_get_protocols(port, &prop->local.protocols);
+	scic_sds_port_get_attached_sas_address(port, &prop->remote.sas_address);
 
-	ihost->sas_ha.notify_port_event(&iphy->sas_phy, PORTE_BROADCAST_RCVD);
-	scic_port_enable_broadcast_change_notification(sci_port);
+	return SCI_SUCCESS;
 }
 
-void isci_port_link_up(struct isci_host *isci_host,
-		       struct scic_sds_port *port,
-		       struct scic_sds_phy *phy)
+static void isci_port_link_up(struct isci_host *isci_host,
+			      struct scic_sds_port *port,
+			      struct scic_sds_phy *phy)
 {
 	unsigned long flags;
 	struct scic_port_properties properties;
@@ -184,8 +229,9 @@ void isci_port_link_up(struct isci_host *isci_host,
  * @port: This parameter specifies the isci port with the active link.
  *
  */
-void isci_port_link_down(struct isci_host *isci_host, struct isci_phy *isci_phy,
-			 struct isci_port *isci_port)
+static void isci_port_link_down(struct isci_host *isci_host,
+				struct isci_phy *isci_phy,
+				struct isci_port *isci_port)
 {
 	struct isci_remote_device *isci_device;
 
@@ -231,37 +277,13 @@ void isci_port_link_down(struct isci_host *isci_host, struct isci_phy *isci_phy,
 
 
 /**
- * isci_port_deformed() - This function is called by libsas when a port becomes
- *    inactive.
- * @phy: This parameter specifies the libsas phy with the inactive port.
- *
- */
-void isci_port_deformed(
-	struct asd_sas_phy *phy)
-{
-	pr_debug("%s: sas_phy = %p\n", __func__, phy);
-}
-
-/**
- * isci_port_formed() - This function is called by libsas when a port becomes
- *    active.
- * @phy: This parameter specifies the libsas phy with the active port.
- *
- */
-void isci_port_formed(
-	struct asd_sas_phy *phy)
-{
-	pr_debug("%s: sas_phy = %p, sas_port = %p\n", __func__, phy, phy->port);
-}
-
-/**
  * isci_port_ready() - This function is called by the sci core when a link
  *    becomes ready.
  * @isci_host: This parameter specifies the isci host object.
  * @port: This parameter specifies the sci port with the active link.
  *
  */
-void isci_port_ready(struct isci_host *isci_host, struct isci_port *isci_port)
+static void isci_port_ready(struct isci_host *isci_host, struct isci_port *isci_port)
 {
 	dev_dbg(&isci_host->pdev->dev,
 		"%s: isci_port = %p\n", __func__, isci_port);
@@ -279,12 +301,19 @@ void isci_port_ready(struct isci_host *isci_host, struct isci_port *isci_port)
  * @port: This parameter specifies the sci port with the active link.
  *
  */
-void isci_port_not_ready(struct isci_host *isci_host, struct isci_port *isci_port)
+static void isci_port_not_ready(struct isci_host *isci_host, struct isci_port *isci_port)
 {
 	dev_dbg(&isci_host->pdev->dev,
 		"%s: isci_port = %p\n", __func__, isci_port);
 }
 
+static void isci_port_stop_complete(struct scic_sds_controller *scic,
+				    struct scic_sds_port *sci_port,
+				    enum sci_status completion_status)
+{
+	dev_dbg(&scic_to_ihost(scic)->pdev->dev, "Port stop complete\n");
+}
+
 /**
  * isci_port_hard_reset_complete() - This function is called by the sci core
  *    when the hard reset complete notification has been received.
@@ -293,8 +322,8 @@ void isci_port_not_ready(struct isci_host *isci_host, struct isci_port *isci_por
  *    process.
  *
  */
-void isci_port_hard_reset_complete(struct isci_port *isci_port,
-				   enum sci_status completion_status)
+static void isci_port_hard_reset_complete(struct isci_port *isci_port,
+					  enum sci_status completion_status)
 {
 	dev_dbg(&isci_port->isci_host->pdev->dev,
 		"%s: isci_port = %p, completion_status=%x\n",
@@ -306,6 +335,2293 @@ void isci_port_hard_reset_complete(struct isci_port *isci_port,
 	complete_all(&isci_port->hard_reset_complete);
 }
 
+/* This method will return a true value if the specified phy can be assigned to
+ * this port The following is a list of phys for each port that are allowed: -
+ * Port 0 - 3 2 1 0 - Port 1 -     1 - Port 2 - 3 2 - Port 3 - 3 This method
+ * doesn't preclude all configurations.  It merely ensures that a phy is part
+ * of the allowable set of phy identifiers for that port.  For example, one
+ * could assign phy 3 to port 0 and no other phys.  Please refer to
+ * scic_sds_port_is_phy_mask_valid() for information regarding whether the
+ * phy_mask for a port can be supported. bool true if this is a valid phy
+ * assignment for the port false if this is not a valid phy assignment for the
+ * port
+ */
+bool scic_sds_port_is_valid_phy_assignment(struct scic_sds_port *sci_port,
+					   u32 phy_index)
+{
+	/* Initialize to invalid value. */
+	u32 existing_phy_index = SCI_MAX_PHYS;
+	u32 index;
+
+	if ((sci_port->physical_port_index == 1) && (phy_index != 1)) {
+		return false;
+	}
+
+	if (sci_port->physical_port_index == 3 && phy_index != 3) {
+		return false;
+	}
+
+	if (
+		(sci_port->physical_port_index == 2)
+		&& ((phy_index == 0) || (phy_index == 1))
+		) {
+		return false;
+	}
+
+	for (index = 0; index < SCI_MAX_PHYS; index++) {
+		if ((sci_port->phy_table[index] != NULL)
+		    && (index != phy_index)) {
+			existing_phy_index = index;
+		}
+	}
+
+	/*
+	 * Ensure that all of the phys in the port are capable of
+	 * operating at the same maximum link rate. */
+	if (
+		(existing_phy_index < SCI_MAX_PHYS)
+		&& (sci_port->owning_controller->user_parameters.sds1.phys[
+			    phy_index].max_speed_generation !=
+		    sci_port->owning_controller->user_parameters.sds1.phys[
+			    existing_phy_index].max_speed_generation)
+		)
+		return false;
+
+	return true;
+}
+
+/**
+ *
+ * @sci_port: This is the port object for which to determine if the phy mask
+ *    can be supported.
+ *
+ * This method will return a true value if the port's phy mask can be supported
+ * by the SCU. The following is a list of valid PHY mask configurations for
+ * each port: - Port 0 - [[3  2] 1] 0 - Port 1 -        [1] - Port 2 - [[3] 2]
+ * - Port 3 -  [3] This method returns a boolean indication specifying if the
+ * phy mask can be supported. true if this is a valid phy assignment for the
+ * port false if this is not a valid phy assignment for the port
+ */
+static bool scic_sds_port_is_phy_mask_valid(
+	struct scic_sds_port *sci_port,
+	u32 phy_mask)
+{
+	if (sci_port->physical_port_index == 0) {
+		if (((phy_mask & 0x0F) == 0x0F)
+		    || ((phy_mask & 0x03) == 0x03)
+		    || ((phy_mask & 0x01) == 0x01)
+		    || (phy_mask == 0))
+			return true;
+	} else if (sci_port->physical_port_index == 1) {
+		if (((phy_mask & 0x02) == 0x02)
+		    || (phy_mask == 0))
+			return true;
+	} else if (sci_port->physical_port_index == 2) {
+		if (((phy_mask & 0x0C) == 0x0C)
+		    || ((phy_mask & 0x04) == 0x04)
+		    || (phy_mask == 0))
+			return true;
+	} else if (sci_port->physical_port_index == 3) {
+		if (((phy_mask & 0x08) == 0x08)
+		    || (phy_mask == 0))
+			return true;
+	}
+
+	return false;
+}
+
+/**
+ *
+ * @sci_port: This parameter specifies the port from which to return a
+ *    connected phy.
+ *
+ * This method retrieves a currently active (i.e. connected) phy contained in
+ * the port.  Currently, the lowest order phy that is connected is returned.
+ * This method returns a pointer to a SCIS_SDS_PHY object. NULL This value is
+ * returned if there are no currently active (i.e. connected to a remote end
+ * point) phys contained in the port. All other values specify a struct scic_sds_phy
+ * object that is active in the port.
+ */
+static struct scic_sds_phy *scic_sds_port_get_a_connected_phy(
+	struct scic_sds_port *sci_port
+	) {
+	u32 index;
+	struct scic_sds_phy *phy;
+
+	for (index = 0; index < SCI_MAX_PHYS; index++) {
+		/*
+		 * Ensure that the phy is both part of the port and currently
+		 * connected to the remote end-point. */
+		phy = sci_port->phy_table[index];
+		if (
+			(phy != NULL)
+			&& scic_sds_port_active_phy(sci_port, phy)
+			) {
+			return phy;
+		}
+	}
+
+	return NULL;
+}
+
+/**
+ * scic_sds_port_set_phy() -
+ * @out]: port The port object to which the phy assignement is being made.
+ * @out]: phy The phy which is being assigned to the port.
+ *
+ * This method attempts to make the assignment of the phy to the port. If
+ * successful the phy is assigned to the ports phy table. bool true if the phy
+ * assignment can be made. false if the phy assignement can not be made. This
+ * is a functional test that only fails if the phy is currently assigned to a
+ * different port.
+ */
+static enum sci_status scic_sds_port_set_phy(
+	struct scic_sds_port *port,
+	struct scic_sds_phy *phy)
+{
+	/*
+	 * Check to see if we can add this phy to a port
+	 * that means that the phy is not part of a port and that the port does
+	 * not already have a phy assinged to the phy index. */
+	if (
+		(port->phy_table[phy->phy_index] == NULL)
+		&& (scic_sds_phy_get_port(phy) == NULL)
+		&& scic_sds_port_is_valid_phy_assignment(port, phy->phy_index)
+		) {
+		/*
+		 * Phy is being added in the stopped state so we are in MPC mode
+		 * make logical port index = physical port index */
+		port->logical_port_index = port->physical_port_index;
+		port->phy_table[phy->phy_index] = phy;
+		scic_sds_phy_set_port(phy, port);
+
+		return SCI_SUCCESS;
+	}
+
+	return SCI_FAILURE;
+}
+
+/**
+ * scic_sds_port_clear_phy() -
+ * @out]: port The port from which the phy is being cleared.
+ * @out]: phy The phy being cleared from the port.
+ *
+ * This method will clear the phy assigned to this port.  This method fails if
+ * this phy is not currently assinged to this port. bool true if the phy is
+ * removed from the port. false if this phy is not assined to this port.
+ */
+static enum sci_status scic_sds_port_clear_phy(
+	struct scic_sds_port *port,
+	struct scic_sds_phy *phy)
+{
+	/* Make sure that this phy is part of this port */
+	if (port->phy_table[phy->phy_index] == phy &&
+	    scic_sds_phy_get_port(phy) == port) {
+		struct scic_sds_controller *scic = port->owning_controller;
+		struct isci_host *ihost = scic_to_ihost(scic);
+
+		/* Yep it is assigned to this port so remove it */
+		scic_sds_phy_set_port(phy, &ihost->ports[SCI_MAX_PORTS].sci);
+		port->phy_table[phy->phy_index] = NULL;
+		return SCI_SUCCESS;
+	}
+
+	return SCI_FAILURE;
+}
+
+/**
+ * scic_sds_port_add_phy() -
+ * @sci_port: This parameter specifies the port in which the phy will be added.
+ * @sci_phy: This parameter is the phy which is to be added to the port.
+ *
+ * This method will add a PHY to the selected port. This method returns an
+ * enum sci_status. SCI_SUCCESS the phy has been added to the port. Any other status
+ * is failre to add the phy to the port.
+ */
+enum sci_status scic_sds_port_add_phy(
+	struct scic_sds_port *sci_port,
+	struct scic_sds_phy *sci_phy)
+{
+	return sci_port->state_handlers->add_phy_handler(
+		       sci_port, sci_phy);
+}
+
+
+/**
+ * scic_sds_port_remove_phy() -
+ * @sci_port: This parameter specifies the port in which the phy will be added.
+ * @sci_phy: This parameter is the phy which is to be added to the port.
+ *
+ * This method will remove the PHY from the selected PORT. This method returns
+ * an enum sci_status. SCI_SUCCESS the phy has been removed from the port. Any other
+ * status is failre to add the phy to the port.
+ */
+enum sci_status scic_sds_port_remove_phy(
+	struct scic_sds_port *sci_port,
+	struct scic_sds_phy *sci_phy)
+{
+	return sci_port->state_handlers->remove_phy_handler(
+		       sci_port, sci_phy);
+}
+
+/**
+ * This method requests the SAS address for the supplied SAS port from the SCI
+ *    implementation.
+ * @sci_port: a handle corresponding to the SAS port for which to return the
+ *    SAS address.
+ * @sas_address: This parameter specifies a pointer to a SAS address structure
+ *    into which the core will copy the SAS address for the port.
+ *
+ */
+void scic_sds_port_get_sas_address(
+	struct scic_sds_port *sci_port,
+	struct sci_sas_address *sas_address)
+{
+	u32 index;
+
+	sas_address->high = 0;
+	sas_address->low  = 0;
+
+	for (index = 0; index < SCI_MAX_PHYS; index++) {
+		if (sci_port->phy_table[index] != NULL) {
+			scic_sds_phy_get_sas_address(sci_port->phy_table[index], sas_address);
+		}
+	}
+}
+
+/*
+ * This function requests the SAS address for the device directly attached to
+ *    this SAS port.
+ * @sci_port: a handle corresponding to the SAS port for which to return the
+ *    SAS address.
+ * @sas_address: This parameter specifies a pointer to a SAS address structure
+ *    into which the core will copy the SAS address for the device directly
+ *    attached to the port.
+ *
+ */
+void scic_sds_port_get_attached_sas_address(
+	struct scic_sds_port *sci_port,
+	struct sci_sas_address *sas_address)
+{
+	struct scic_sds_phy *sci_phy;
+
+	/*
+	 * Ensure that the phy is both part of the port and currently
+	 * connected to the remote end-point.
+	 */
+	sci_phy = scic_sds_port_get_a_connected_phy(sci_port);
+	if (sci_phy) {
+		if (sci_phy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA) {
+			scic_sds_phy_get_attached_sas_address(sci_phy,
+							      sas_address);
+		} else {
+			scic_sds_phy_get_sas_address(sci_phy, sas_address);
+			sas_address->low += sci_phy->phy_index;
+		}
+	} else {
+		sas_address->high = 0;
+		sas_address->low  = 0;
+	}
+}
+
+/**
+ * scic_sds_port_construct_dummy_rnc() - create dummy rnc for si workaround
+ *
+ * @sci_port: logical port on which we need to create the remote node context
+ * @rni: remote node index for this remote node context.
+ *
+ * This routine will construct a dummy remote node context data structure
+ * This structure will be posted to the hardware to work around a scheduler
+ * error in the hardware.
+ */
+static void scic_sds_port_construct_dummy_rnc(struct scic_sds_port *sci_port, u16 rni)
+{
+	union scu_remote_node_context *rnc;
+
+	rnc = &sci_port->owning_controller->remote_node_context_table[rni];
+
+	memset(rnc, 0, sizeof(union scu_remote_node_context));
+
+	rnc->ssp.remote_sas_address_hi = 0;
+	rnc->ssp.remote_sas_address_lo = 0;
+
+	rnc->ssp.remote_node_index = rni;
+	rnc->ssp.remote_node_port_width = 1;
+	rnc->ssp.logical_port_index = sci_port->physical_port_index;
+
+	rnc->ssp.nexus_loss_timer_enable = false;
+	rnc->ssp.check_bit = false;
+	rnc->ssp.is_valid = true;
+	rnc->ssp.is_remote_node_context = true;
+	rnc->ssp.function_number = 0;
+	rnc->ssp.arbitration_wait_time = 0;
+}
+
+/**
+ * scic_sds_port_construct_dummy_task() - create dummy task for si workaround
+ * @sci_port The logical port on which we need to create the
+ *            remote node context.
+ *            context.
+ * @tci The remote node index for this remote node context.
+ *
+ * This routine will construct a dummy task context data structure.  This
+ * structure will be posted to the hardwre to work around a scheduler error
+ * in the hardware.
+ *
+ */
+static void scic_sds_port_construct_dummy_task(struct scic_sds_port *sci_port, u16 tci)
+{
+	struct scu_task_context *task_context;
+
+	task_context = scic_sds_controller_get_task_context_buffer(sci_port->owning_controller, tci);
+
+	memset(task_context, 0, sizeof(struct scu_task_context));
+
+	task_context->abort = 0;
+	task_context->priority = 0;
+	task_context->initiator_request = 1;
+	task_context->connection_rate = 1;
+	task_context->protocol_engine_index = 0;
+	task_context->logical_port_index = sci_port->physical_port_index;
+	task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SSP;
+	task_context->task_index = scic_sds_io_tag_get_index(tci);
+	task_context->valid = SCU_TASK_CONTEXT_VALID;
+	task_context->context_type = SCU_TASK_CONTEXT_TYPE;
+
+	task_context->remote_node_index = sci_port->reserved_rni;
+	task_context->command_code = 0;
+
+	task_context->link_layer_control = 0;
+	task_context->do_not_dma_ssp_good_response = 1;
+	task_context->strict_ordering = 0;
+	task_context->control_frame = 0;
+	task_context->timeout_enable = 0;
+	task_context->block_guard_enable = 0;
+
+	task_context->address_modifier = 0;
+
+	task_context->task_phase = 0x01;
+}
+
+static void scic_sds_port_destroy_dummy_resources(struct scic_sds_port *sci_port)
+{
+	struct scic_sds_controller *scic = sci_port->owning_controller;
+
+	if (sci_port->reserved_tci != SCU_DUMMY_INDEX)
+		scic_controller_free_io_tag(scic, sci_port->reserved_tci);
+
+	if (sci_port->reserved_rni != SCU_DUMMY_INDEX)
+		scic_sds_remote_node_table_release_remote_node_index(&scic->available_remote_nodes,
+								     1, sci_port->reserved_rni);
+
+	sci_port->reserved_rni = SCU_DUMMY_INDEX;
+	sci_port->reserved_tci = SCU_DUMMY_INDEX;
+}
+
+/**
+ * This method performs initialization of the supplied port. Initialization
+ *    includes: - state machine initialization - member variable initialization
+ *    - configuring the phy_mask
+ * @sci_port:
+ * @transport_layer_registers:
+ * @port_task_scheduler_registers:
+ * @port_configuration_regsiter:
+ *
+ * enum sci_status SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION This value is returned
+ * if the phy being added to the port
+ */
+enum sci_status scic_sds_port_initialize(
+	struct scic_sds_port *sci_port,
+	void __iomem *port_task_scheduler_registers,
+	void __iomem *port_configuration_regsiter,
+	void __iomem *viit_registers)
+{
+	sci_port->port_task_scheduler_registers  = port_task_scheduler_registers;
+	sci_port->port_pe_configuration_register = port_configuration_regsiter;
+	sci_port->viit_registers                 = viit_registers;
+
+	return SCI_SUCCESS;
+}
+
+/**
+ * scic_port_hard_reset() - perform port hard reset
+ * @port: a handle corresponding to the SAS port to be hard reset.
+ * @reset_timeout: This parameter specifies the number of milliseconds in which
+ *    the port reset operation should complete.
+ *
+ * The SCI User callback in scic_user_callbacks_t will only be called once for
+ * each phy in the SAS Port at completion of the hard reset sequence. Return a
+ * status indicating whether the hard reset started successfully. SCI_SUCCESS
+ * This value is returned if the hard reset operation started successfully.
+ */
+static enum sci_status scic_port_hard_reset(struct scic_sds_port *port,
+					    u32 reset_timeout)
+{
+	return port->state_handlers->reset_handler(
+		       port, reset_timeout);
+}
+
+/**
+ * This method assigns the direct attached device ID for this port.
+ *
+ * @param[in] sci_port The port for which the direct attached device id is to
+ *       be assigned.
+ * @param[in] device_id The direct attached device ID to assign to the port.
+ *       This will be the RNi for the device
+ */
+void scic_sds_port_setup_transports(
+	struct scic_sds_port *sci_port,
+	u32 device_id)
+{
+	u8 index;
+
+	for (index = 0; index < SCI_MAX_PHYS; index++) {
+		if (sci_port->active_phy_mask & (1 << index))
+			scic_sds_phy_setup_transport(sci_port->phy_table[index], device_id);
+	}
+}
+
+/**
+ *
+ * @sci_port: This is the port on which the phy should be enabled.
+ * @sci_phy: This is the specific phy which to enable.
+ * @do_notify_user: This parameter specifies whether to inform the user (via
+ *    scic_cb_port_link_up()) as to the fact that a new phy as become ready.
+ *
+ * This function will activate the phy in the port.
+ * Activation includes: - adding
+ * the phy to the port - enabling the Protocol Engine in the silicon. -
+ * notifying the user that the link is up. none
+ */
+static void scic_sds_port_activate_phy(struct scic_sds_port *sci_port,
+				       struct scic_sds_phy *sci_phy,
+				       bool do_notify_user)
+{
+	struct scic_sds_controller *scic = sci_port->owning_controller;
+	struct isci_host *ihost = scic_to_ihost(scic);
+
+	if (sci_phy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA)
+		scic_sds_phy_resume(sci_phy);
+
+	sci_port->active_phy_mask |= 1 << sci_phy->phy_index;
+
+	scic_sds_controller_clear_invalid_phy(scic, sci_phy);
+
+	if (do_notify_user == true)
+		isci_port_link_up(ihost, sci_port, sci_phy);
+}
+
+void scic_sds_port_deactivate_phy(struct scic_sds_port *sci_port,
+				  struct scic_sds_phy *sci_phy,
+				  bool do_notify_user)
+{
+	struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port);
+	struct isci_port *iport = sci_port_to_iport(sci_port);
+	struct isci_host *ihost = scic_to_ihost(scic);
+	struct isci_phy *iphy = sci_phy_to_iphy(sci_phy);
+
+	sci_port->active_phy_mask &= ~(1 << sci_phy->phy_index);
+
+	sci_phy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN;
+
+	/* Re-assign the phy back to the LP as if it were a narrow port */
+	writel(sci_phy->phy_index,
+		&sci_port->port_pe_configuration_register[sci_phy->phy_index]);
+
+	if (do_notify_user == true)
+		isci_port_link_down(ihost, iphy, iport);
+}
+
+/**
+ *
+ * @sci_port: This is the port on which the phy should be disabled.
+ * @sci_phy: This is the specific phy which to disabled.
+ *
+ * This function will disable the phy and report that the phy is not valid for
+ * this port object. None
+ */
+static void scic_sds_port_invalid_link_up(struct scic_sds_port *sci_port,
+					  struct scic_sds_phy *sci_phy)
+{
+	struct scic_sds_controller *scic = sci_port->owning_controller;
+
+	/*
+	 * Check to see if we have alreay reported this link as bad and if
+	 * not go ahead and tell the SCI_USER that we have discovered an
+	 * invalid link.
+	 */
+	if ((scic->invalid_phy_mask & (1 << sci_phy->phy_index)) == 0) {
+		scic_sds_controller_set_invalid_phy(scic, sci_phy);
+		dev_warn(&scic_to_ihost(scic)->pdev->dev, "Invalid link up!\n");
+	}
+}
+
+/**
+ * scic_sds_port_general_link_up_handler - phy can be assigned to port?
+ * @sci_port: scic_sds_port object for which has a phy that has gone link up.
+ * @sci_phy: This is the struct scic_sds_phy object that has gone link up.
+ * @do_notify_user: This parameter specifies whether to inform the user (via
+ *    scic_cb_port_link_up()) as to the fact that a new phy as become ready.
+ *
+ * Determine if this phy can be assigned to this
+ * port . If the phy is not a valid PHY for
+ * this port then the function will notify the user. A PHY can only be
+ * part of a port if it's attached SAS ADDRESS is the same as all other PHYs in
+ * the same port. none
+ */
+static void scic_sds_port_general_link_up_handler(struct scic_sds_port *sci_port,
+						  struct scic_sds_phy *sci_phy,
+						  bool do_notify_user)
+{
+	struct sci_sas_address port_sas_address;
+	struct sci_sas_address phy_sas_address;
+
+	scic_sds_port_get_attached_sas_address(sci_port, &port_sas_address);
+	scic_sds_phy_get_attached_sas_address(sci_phy, &phy_sas_address);
+
+	/* If the SAS address of the new phy matches the SAS address of
+	 * other phys in the port OR this is the first phy in the port,
+	 * then activate the phy and allow it to be used for operations
+	 * in this port.
+	 */
+	if ((phy_sas_address.high == port_sas_address.high &&
+	     phy_sas_address.low  == port_sas_address.low) ||
+	    sci_port->active_phy_mask == 0) {
+		struct sci_base_state_machine *sm = &sci_port->state_machine;
+
+		scic_sds_port_activate_phy(sci_port, sci_phy, do_notify_user);
+		if (sm->current_state_id == SCI_BASE_PORT_STATE_RESETTING)
+			sci_base_state_machine_change_state(sm, SCI_BASE_PORT_STATE_READY);
+	} else
+		scic_sds_port_invalid_link_up(sci_port, sci_phy);
+}
+
+
+
+/**
+ * This method returns false if the port only has a single phy object assigned.
+ *     If there are no phys or more than one phy then the method will return
+ *    true.
+ * @sci_port: The port for which the wide port condition is to be checked.
+ *
+ * bool true Is returned if this is a wide ported port. false Is returned if
+ * this is a narrow port.
+ */
+static bool scic_sds_port_is_wide(struct scic_sds_port *sci_port)
+{
+	u32 index;
+	u32 phy_count = 0;
+
+	for (index = 0; index < SCI_MAX_PHYS; index++) {
+		if (sci_port->phy_table[index] != NULL) {
+			phy_count++;
+		}
+	}
+
+	return phy_count != 1;
+}
+
+/**
+ * This method is called by the PHY object when the link is detected. if the
+ *    port wants the PHY to continue on to the link up state then the port
+ *    layer must return true.  If the port object returns false the phy object
+ *    must halt its attempt to go link up.
+ * @sci_port: The port associated with the phy object.
+ * @sci_phy: The phy object that is trying to go link up.
+ *
+ * true if the phy object can continue to the link up condition. true Is
+ * returned if this phy can continue to the ready state. false Is returned if
+ * can not continue on to the ready state. This notification is in place for
+ * wide ports and direct attached phys.  Since there are no wide ported SATA
+ * devices this could become an invalid port configuration.
+ */
+bool scic_sds_port_link_detected(
+	struct scic_sds_port *sci_port,
+	struct scic_sds_phy *sci_phy)
+{
+	if ((sci_port->logical_port_index != SCIC_SDS_DUMMY_PORT) &&
+	    (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) &&
+	    scic_sds_port_is_wide(sci_port)) {
+		scic_sds_port_invalid_link_up(sci_port, sci_phy);
+
+		return false;
+	}
+
+	return true;
+}
+
+/**
+ * This method is the entry point for the phy to inform the port that it is now
+ *    in a ready state
+ * @sci_port:
+ *
+ *
+ */
+void scic_sds_port_link_up(
+	struct scic_sds_port *sci_port,
+	struct scic_sds_phy *sci_phy)
+{
+	sci_phy->is_in_link_training = false;
+
+	sci_port->state_handlers->link_up_handler(sci_port, sci_phy);
+}
+
+/**
+ * This method is the entry point for the phy to inform the port that it is no
+ *    longer in a ready state
+ * @sci_port:
+ *
+ *
+ */
+void scic_sds_port_link_down(
+	struct scic_sds_port *sci_port,
+	struct scic_sds_phy *sci_phy)
+{
+	sci_port->state_handlers->link_down_handler(sci_port, sci_phy);
+}
+
+/**
+ * This method is called to start an IO request on this port.
+ * @sci_port:
+ * @sci_dev:
+ * @sci_req:
+ *
+ * enum sci_status
+ */
+enum sci_status scic_sds_port_start_io(
+	struct scic_sds_port *sci_port,
+	struct scic_sds_remote_device *sci_dev,
+	struct scic_sds_request *sci_req)
+{
+	return sci_port->state_handlers->start_io_handler(
+		       sci_port, sci_dev, sci_req);
+}
+
+/**
+ * This method is called to complete an IO request to the port.
+ * @sci_port:
+ * @sci_dev:
+ * @sci_req:
+ *
+ * enum sci_status
+ */
+enum sci_status scic_sds_port_complete_io(
+	struct scic_sds_port *sci_port,
+	struct scic_sds_remote_device *sci_dev,
+	struct scic_sds_request *sci_req)
+{
+	return sci_port->state_handlers->complete_io_handler(
+		       sci_port, sci_dev, sci_req);
+}
+
+/**
+ * This method is provided to timeout requests for port operations. Mostly its
+ *    for the port reset operation.
+ *
+ *
+ */
+static void scic_sds_port_timeout_handler(void *port)
+{
+	struct scic_sds_port *sci_port = port;
+	u32 current_state;
+
+	current_state = sci_base_state_machine_get_state(
+		&sci_port->state_machine);
+
+	if (current_state == SCI_BASE_PORT_STATE_RESETTING) {
+		/*
+		 * if the port is still in the resetting state then the
+		 * timeout fired before the reset completed.
+		 */
+		sci_base_state_machine_change_state(
+			&sci_port->state_machine,
+			SCI_BASE_PORT_STATE_FAILED);
+	} else if (current_state == SCI_BASE_PORT_STATE_STOPPED) {
+		/*
+		 * if the port is stopped then the start request failed
+		 * In this case stay in the stopped state.
+		 */
+		dev_err(sciport_to_dev(sci_port),
+			"%s: SCIC Port 0x%p failed to stop before tiemout.\n",
+			__func__,
+			sci_port);
+	} else if (current_state == SCI_BASE_PORT_STATE_STOPPING) {
+		/*
+		 * if the port is still stopping then the stop has not
+		 * completed
+		 */
+		isci_port_stop_complete(
+				scic_sds_port_get_controller(sci_port),
+				sci_port,
+				SCI_FAILURE_TIMEOUT);
+	} else {
+		/*
+		 * The port is in the ready state and we have a timer
+		 * reporting a timeout this should not happen.
+		 */
+		dev_err(sciport_to_dev(sci_port),
+			"%s: SCIC Port 0x%p is processing a timeout operation "
+			"in state %d.\n",
+			__func__,
+			sci_port,
+			current_state);
+	}
+}
+
+/* --------------------------------------------------------------------------- */
+
+/**
+ * This function updates the hardwares VIIT entry for this port.
+ *
+ *
+ */
+static void scic_sds_port_update_viit_entry(struct scic_sds_port *sci_port)
+{
+	struct sci_sas_address sas_address;
+
+	scic_sds_port_get_sas_address(sci_port, &sas_address);
+
+	writel(sas_address.high,
+		&sci_port->viit_registers->initiator_sas_address_hi);
+	writel(sas_address.low,
+		&sci_port->viit_registers->initiator_sas_address_lo);
+
+	/* This value get cleared just in case its not already cleared */
+	writel(0, &sci_port->viit_registers->reserved);
+
+	/* We are required to update the status register last */
+	writel(SCU_VIIT_ENTRY_ID_VIIT |
+	       SCU_VIIT_IPPT_INITIATOR |
+	       ((1 << sci_port->physical_port_index) << SCU_VIIT_ENTRY_LPVIE_SHIFT) |
+	       SCU_VIIT_STATUS_ALL_VALID,
+	       &sci_port->viit_registers->status);
+}
+
+/**
+ * This method returns the maximum allowed speed for data transfers on this
+ *    port.  This maximum allowed speed evaluates to the maximum speed of the
+ *    slowest phy in the port.
+ * @sci_port: This parameter specifies the port for which to retrieve the
+ *    maximum allowed speed.
+ *
+ * This method returns the maximum negotiated speed of the slowest phy in the
+ * port.
+ */
+enum sas_linkrate scic_sds_port_get_max_allowed_speed(
+	struct scic_sds_port *sci_port)
+{
+	u16 index;
+	enum sas_linkrate max_allowed_speed = SAS_LINK_RATE_6_0_GBPS;
+	struct scic_sds_phy *phy = NULL;
+
+	/*
+	 * Loop through all of the phys in this port and find the phy with the
+	 * lowest maximum link rate. */
+	for (index = 0; index < SCI_MAX_PHYS; index++) {
+		phy = sci_port->phy_table[index];
+		if (
+			(phy != NULL)
+			&& (scic_sds_port_active_phy(sci_port, phy) == true)
+			&& (phy->max_negotiated_speed < max_allowed_speed)
+			)
+			max_allowed_speed = phy->max_negotiated_speed;
+	}
+
+	return max_allowed_speed;
+}
+
+static void scic_port_enable_broadcast_change_notification(struct scic_sds_port *port)
+{
+	struct scic_sds_phy *phy;
+	u32 register_value;
+	u8 index;
+
+	/* Loop through all of the phys to enable BCN. */
+	for (index = 0; index < SCI_MAX_PHYS; index++) {
+		phy = port->phy_table[index];
+		if (phy != NULL) {
+			register_value =
+				readl(&phy->link_layer_registers->link_layer_control);
+
+			/* clear the bit by writing 1. */
+			writel(register_value,
+				&phy->link_layer_registers->link_layer_control);
+		}
+	}
+}
+
+/*
+ * ****************************************************************************
+ * *  READY SUBSTATE HANDLERS
+ * **************************************************************************** */
+
+/*
+ * This method is the general ready state stop handler for the struct scic_sds_port
+ * object.  This function will transition the ready substate machine to its
+ * final state. enum sci_status SCI_SUCCESS
+ */
+static enum sci_status scic_sds_port_ready_substate_stop_handler(
+	struct scic_sds_port *port)
+{
+	sci_base_state_machine_change_state(
+		&port->state_machine,
+		SCI_BASE_PORT_STATE_STOPPING
+		);
+
+	return SCI_SUCCESS;
+}
+
+/*
+ * This method is the general ready substate complete io handler for the
+ * struct scic_sds_port object.  This function decrments the outstanding request count
+ * for this port object. enum sci_status SCI_SUCCESS
+ */
+static enum sci_status scic_sds_port_ready_substate_complete_io_handler(
+	struct scic_sds_port *port,
+	struct scic_sds_remote_device *device,
+	struct scic_sds_request *io_request)
+{
+	scic_sds_port_decrement_request_count(port);
+
+	return SCI_SUCCESS;
+}
+
+static enum sci_status scic_sds_port_ready_substate_add_phy_handler(
+	struct scic_sds_port *port,
+	struct scic_sds_phy *phy)
+{
+	enum sci_status status;
+
+	status = scic_sds_port_set_phy(port, phy);
+
+	if (status == SCI_SUCCESS) {
+		scic_sds_port_general_link_up_handler(port, phy, true);
+
+		port->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING;
+
+		sci_base_state_machine_change_state(
+			&port->ready_substate_machine,
+			SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING
+			);
+	}
+
+	return status;
+}
+
+
+static enum sci_status scic_sds_port_ready_substate_remove_phy_handler(
+	struct scic_sds_port *port,
+	struct scic_sds_phy *phy)
+{
+	enum sci_status status;
+
+	status = scic_sds_port_clear_phy(port, phy);
+
+	if (status == SCI_SUCCESS) {
+		scic_sds_port_deactivate_phy(port, phy, true);
+
+		port->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING;
+
+		sci_base_state_machine_change_state(
+			&port->ready_substate_machine,
+			SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING
+			);
+	}
+
+	return status;
+}
+
+/*
+ * ****************************************************************************
+ * *  READY SUBSTATE WAITING HANDLERS
+ * **************************************************************************** */
+
+/**
+ *
+ * @sci_port: This is the struct scic_sds_port object that which has a phy that has
+ *    gone link up.
+ * @sci_phy: This is the struct scic_sds_phy object that has gone link up.
+ *
+ * This method is the ready waiting substate link up handler for the
+ * struct scic_sds_port object.  This methos will report the link up condition for
+ * this port and will transition to the ready operational substate. none
+ */
+static void scic_sds_port_ready_waiting_substate_link_up_handler(
+	struct scic_sds_port *sci_port,
+	struct scic_sds_phy *sci_phy)
+{
+	/*
+	 * Since this is the first phy going link up for the port we can just enable
+	 * it and continue. */
+	scic_sds_port_activate_phy(sci_port, sci_phy, true);
+
+	sci_base_state_machine_change_state(
+		&sci_port->ready_substate_machine,
+		SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL
+		);
+}
+
+/*
+ * This method is the ready waiting substate start io handler for the
+ * struct scic_sds_port object. The port object can not accept new requests so the
+ * request is failed. enum sci_status SCI_FAILURE_INVALID_STATE
+ */
+static enum sci_status scic_sds_port_ready_waiting_substate_start_io_handler(
+	struct scic_sds_port *port,
+	struct scic_sds_remote_device *device,
+	struct scic_sds_request *io_request)
+{
+	return SCI_FAILURE_INVALID_STATE;
+}
+
+/*
+ * ****************************************************************************
+ * *  READY SUBSTATE OPERATIONAL HANDLERS
+ * **************************************************************************** */
+
+/*
+ * This method will casue the port to reset. enum sci_status SCI_SUCCESS
+ */
+static enum
+sci_status scic_sds_port_ready_operational_substate_reset_handler(
+		struct scic_sds_port *port,
+		u32 timeout)
+{
+	enum sci_status status = SCI_FAILURE_INVALID_PHY;
+	u32 phy_index;
+	struct scic_sds_phy *selected_phy = NULL;
+
+
+	/* Select a phy on which we can send the hard reset request. */
+	for (phy_index = 0;
+	     (phy_index < SCI_MAX_PHYS) && (selected_phy == NULL);
+	     phy_index++) {
+		selected_phy = port->phy_table[phy_index];
+
+		if ((selected_phy != NULL) &&
+		    !scic_sds_port_active_phy(port, selected_phy)) {
+			/*
+			 * We found a phy but it is not ready select
+			 * different phy
+			 */
+			selected_phy = NULL;
+		}
+	}
+
+	/* If we have a phy then go ahead and start the reset procedure */
+	if (selected_phy != NULL) {
+		status = scic_sds_phy_reset(selected_phy);
+
+		if (status == SCI_SUCCESS) {
+			isci_timer_start(port->timer_handle, timeout);
+			port->not_ready_reason =
+				SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED;
+
+			sci_base_state_machine_change_state(
+					&port->state_machine,
+					SCI_BASE_PORT_STATE_RESETTING);
+		}
+	}
+
+	return status;
+}
+
+/**
+ * scic_sds_port_ready_operational_substate_link_up_handler() -
+ * @sci_port: This is the struct scic_sds_port object that which has a phy that has
+ *    gone link up.
+ * @sci_phy: This is the struct scic_sds_phy object that has gone link up.
+ *
+ * This method is the ready operational substate link up handler for the
+ * struct scic_sds_port object. This function notifies the SCI User that the phy has
+ * gone link up. none
+ */
+static void scic_sds_port_ready_operational_substate_link_up_handler(
+	struct scic_sds_port *sci_port,
+	struct scic_sds_phy *sci_phy)
+{
+	scic_sds_port_general_link_up_handler(sci_port, sci_phy, true);
+}
+
+/**
+ * scic_sds_port_ready_operational_substate_link_down_handler() -
+ * @sci_port: This is the struct scic_sds_port object that which has a phy that has
+ *    gone link down.
+ * @sci_phy: This is the struct scic_sds_phy object that has gone link down.
+ *
+ * This method is the ready operational substate link down handler for the
+ * struct scic_sds_port object. This function notifies the SCI User that the phy has
+ * gone link down and if this is the last phy in the port the port will change
+ * state to the ready waiting substate. none
+ */
+static void scic_sds_port_ready_operational_substate_link_down_handler(
+	struct scic_sds_port *sci_port,
+	struct scic_sds_phy *sci_phy)
+{
+	scic_sds_port_deactivate_phy(sci_port, sci_phy, true);
+
+	/*
+	 * If there are no active phys left in the port, then transition
+	 * the port to the WAITING state until such time as a phy goes
+	 * link up. */
+	if (sci_port->active_phy_mask == 0)
+		sci_base_state_machine_change_state(&sci_port->ready_substate_machine,
+						    SCIC_SDS_PORT_READY_SUBSTATE_WAITING);
+}
+
+/*
+ * This method is the ready operational substate start io handler for the
+ * struct scic_sds_port object.  This function incremetns the outstanding request
+ * count for this port object. enum sci_status SCI_SUCCESS
+ */
+static enum sci_status scic_sds_port_ready_operational_substate_start_io_handler(
+	struct scic_sds_port *port,
+	struct scic_sds_remote_device *device,
+	struct scic_sds_request *io_request)
+{
+	port->started_request_count++;
+	return SCI_SUCCESS;
+}
+
+/*
+ * ****************************************************************************
+ * *  READY SUBSTATE OPERATIONAL HANDLERS
+ * **************************************************************************** */
+
+/*
+ * This is the default method for a port add phy request.  It will report a
+ * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE
+ */
+static enum sci_status scic_sds_port_ready_configuring_substate_add_phy_handler(
+	struct scic_sds_port *port,
+	struct scic_sds_phy *phy)
+{
+	enum sci_status status;
+
+	status = scic_sds_port_set_phy(port, phy);
+
+	if (status == SCI_SUCCESS) {
+		scic_sds_port_general_link_up_handler(port, phy, true);
+
+		/*
+		 * Re-enter the configuring state since this may be the last phy in
+		 * the port. */
+		sci_base_state_machine_change_state(
+			&port->ready_substate_machine,
+			SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING
+			);
+	}
+
+	return status;
+}
+
+/*
+ * This is the default method for a port remove phy request.  It will report a
+ * warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE
+ */
+static enum sci_status scic_sds_port_ready_configuring_substate_remove_phy_handler(
+	struct scic_sds_port *port,
+	struct scic_sds_phy *phy)
+{
+	enum sci_status status;
+
+	status = scic_sds_port_clear_phy(port, phy);
+
+	if (status == SCI_SUCCESS) {
+		scic_sds_port_deactivate_phy(port, phy, true);
+
+		/*
+		 * Re-enter the configuring state since this may be the last phy in
+		 * the port. */
+		sci_base_state_machine_change_state(
+			&port->ready_substate_machine,
+			SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING
+			);
+	}
+
+	return status;
+}
+
+/**
+ * scic_sds_port_ready_configuring_substate_complete_io_handler() -
+ * @port: This is the port that is being requested to complete the io request.
+ * @device: This is the device on which the io is completing.
+ *
+ * This method will decrement the outstanding request count for this port. If
+ * the request count goes to 0 then the port can be reprogrammed with its new
+ * phy data.
+ */
+static enum sci_status
+scic_sds_port_ready_configuring_substate_complete_io_handler(
+	struct scic_sds_port *port,
+	struct scic_sds_remote_device *device,
+	struct scic_sds_request *io_request)
+{
+	scic_sds_port_decrement_request_count(port);
+
+	if (port->started_request_count == 0) {
+		sci_base_state_machine_change_state(
+			&port->ready_substate_machine,
+			SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL
+			);
+	}
+
+	return SCI_SUCCESS;
+}
+
+static enum sci_status default_port_handler(struct scic_sds_port *sci_port,
+					    const char *func)
+{
+	dev_warn(sciport_to_dev(sci_port),
+		 "%s: in wrong state: %d\n", func,
+		 sci_base_state_machine_get_state(&sci_port->state_machine));
+	return SCI_FAILURE_INVALID_STATE;
+}
+
+static enum sci_status
+scic_sds_port_default_start_handler(struct scic_sds_port *sci_port)
+{
+	return default_port_handler(sci_port, __func__);
+}
+
+static enum sci_status
+scic_sds_port_default_stop_handler(struct scic_sds_port *sci_port)
+{
+	return default_port_handler(sci_port, __func__);
+}
+
+static enum sci_status
+scic_sds_port_default_destruct_handler(struct scic_sds_port *sci_port)
+{
+	return default_port_handler(sci_port, __func__);
+}
+
+static enum sci_status
+scic_sds_port_default_reset_handler(struct scic_sds_port *sci_port,
+				    u32 timeout)
+{
+	return default_port_handler(sci_port, __func__);
+}
+
+static enum sci_status
+scic_sds_port_default_add_phy_handler(struct scic_sds_port *sci_port,
+				      struct scic_sds_phy *base_phy)
+{
+	return default_port_handler(sci_port, __func__);
+}
+
+static enum sci_status
+scic_sds_port_default_remove_phy_handler(struct scic_sds_port *sci_port,
+					 struct scic_sds_phy *base_phy)
+{
+	return default_port_handler(sci_port, __func__);
+}
+
+/*
+ * This is the default method for a port unsolicited frame request.  It will
+ * report a warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE Is it even
+ * possible to receive an unsolicited frame directed to a port object?  It
+ * seems possible if we implementing virtual functions but until then?
+ */
+static enum sci_status
+scic_sds_port_default_frame_handler(struct scic_sds_port *sci_port,
+				    u32 frame_index)
+{
+	struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port);
+
+	default_port_handler(sci_port, __func__);
+	scic_sds_controller_release_frame(scic, frame_index);
+
+	return SCI_FAILURE_INVALID_STATE;
+}
+
+static enum sci_status scic_sds_port_default_event_handler(struct scic_sds_port *sci_port,
+						    u32 event_code)
+{
+	return default_port_handler(sci_port, __func__);
+}
+
+static void scic_sds_port_default_link_up_handler(struct scic_sds_port *sci_port,
+					   struct scic_sds_phy *sci_phy)
+{
+	default_port_handler(sci_port, __func__);
+}
+
+static void scic_sds_port_default_link_down_handler(struct scic_sds_port *sci_port,
+					     struct scic_sds_phy *sci_phy)
+{
+	default_port_handler(sci_port, __func__);
+}
+
+static enum sci_status scic_sds_port_default_start_io_handler(struct scic_sds_port *sci_port,
+						       struct scic_sds_remote_device *sci_dev,
+						       struct scic_sds_request *sci_req)
+{
+	return default_port_handler(sci_port, __func__);
+}
+
+static enum sci_status scic_sds_port_default_complete_io_handler(struct scic_sds_port *sci_port,
+								 struct scic_sds_remote_device *sci_dev,
+								 struct scic_sds_request *sci_req)
+{
+	return default_port_handler(sci_port, __func__);
+}
+
+
+
+static struct scic_sds_port_state_handler
+scic_sds_port_ready_substate_handler_table[SCIC_SDS_PORT_READY_MAX_SUBSTATES] = {
+	{
+		/* SCIC_SDS_PORT_READY_SUBSTATE_WAITING */
+		scic_sds_port_default_start_handler,
+		scic_sds_port_ready_substate_stop_handler,
+		scic_sds_port_default_destruct_handler,
+		scic_sds_port_default_reset_handler,
+		scic_sds_port_ready_substate_add_phy_handler,
+		scic_sds_port_default_remove_phy_handler,
+		scic_sds_port_default_frame_handler,
+		scic_sds_port_default_event_handler,
+		scic_sds_port_ready_waiting_substate_link_up_handler,
+		scic_sds_port_default_link_down_handler,
+		scic_sds_port_ready_waiting_substate_start_io_handler,
+		scic_sds_port_ready_substate_complete_io_handler,
+	},
+
+	{
+		/* SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL */
+		scic_sds_port_default_start_handler,
+		scic_sds_port_ready_substate_stop_handler,
+		scic_sds_port_default_destruct_handler,
+		scic_sds_port_ready_operational_substate_reset_handler,
+		scic_sds_port_ready_substate_add_phy_handler,
+		scic_sds_port_ready_substate_remove_phy_handler,
+		scic_sds_port_default_frame_handler,
+		scic_sds_port_default_event_handler,
+		scic_sds_port_ready_operational_substate_link_up_handler,
+		scic_sds_port_ready_operational_substate_link_down_handler,
+		scic_sds_port_ready_operational_substate_start_io_handler,
+		scic_sds_port_ready_substate_complete_io_handler,
+	},
+
+	{
+		/* SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING */
+		scic_sds_port_default_start_handler,
+		scic_sds_port_ready_substate_stop_handler,
+		scic_sds_port_default_destruct_handler,
+		scic_sds_port_default_reset_handler,
+		scic_sds_port_ready_configuring_substate_add_phy_handler,
+		scic_sds_port_ready_configuring_substate_remove_phy_handler,
+		scic_sds_port_default_frame_handler,
+		scic_sds_port_default_event_handler,
+		scic_sds_port_default_link_up_handler,
+		scic_sds_port_default_link_down_handler,
+		scic_sds_port_default_start_io_handler,
+		scic_sds_port_ready_configuring_substate_complete_io_handler
+	}
+};
+
+/**
+ * scic_sds_port_set_ready_state_handlers() -
+ *
+ * This macro sets the port ready substate handlers.
+ */
+#define scic_sds_port_set_ready_state_handlers(port, state_id) \
+	scic_sds_port_set_state_handlers(\
+		port, &scic_sds_port_ready_substate_handler_table[(state_id)] \
+		)
+
+/*
+ * ******************************************************************************
+ * *  PORT STATE PRIVATE METHODS
+ * ****************************************************************************** */
+
+/**
+ *
+ * @sci_port: This is the struct scic_sds_port object to suspend.
+ *
+ * This method will susped the port task scheduler for this port object. none
+ */
+static void
+scic_sds_port_suspend_port_task_scheduler(struct scic_sds_port *port)
+{
+	u32 pts_control_value;
+
+	pts_control_value = readl(&port->port_task_scheduler_registers->control);
+	pts_control_value |= SCU_PTSxCR_GEN_BIT(SUSPEND);
+	writel(pts_control_value, &port->port_task_scheduler_registers->control);
+}
+
+/**
+ * scic_sds_port_post_dummy_request() - post dummy/workaround request
+ * @sci_port: port to post task
+ *
+ * Prevent the hardware scheduler from posting new requests to the front
+ * of the scheduler queue causing a starvation problem for currently
+ * ongoing requests.
+ *
+ */
+static void scic_sds_port_post_dummy_request(struct scic_sds_port *sci_port)
+{
+	u32 command;
+	struct scu_task_context *task_context;
+	struct scic_sds_controller *scic = sci_port->owning_controller;
+	u16 tci = sci_port->reserved_tci;
+
+	task_context = scic_sds_controller_get_task_context_buffer(scic, tci);
+
+	task_context->abort = 0;
+
+	command = SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC |
+		  sci_port->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT |
+		  tci;
+
+	scic_sds_controller_post_request(scic, command);
+}
+
+/**
+ * This routine will abort the dummy request.  This will alow the hardware to
+ * power down parts of the silicon to save power.
+ *
+ * @sci_port: The port on which the task must be aborted.
+ *
+ */
+static void scic_sds_port_abort_dummy_request(struct scic_sds_port *sci_port)
+{
+	struct scic_sds_controller *scic = sci_port->owning_controller;
+	u16 tci = sci_port->reserved_tci;
+	struct scu_task_context *tc;
+	u32 command;
+
+	tc = scic_sds_controller_get_task_context_buffer(scic, tci);
+
+	tc->abort = 1;
+
+	command = SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT |
+		  sci_port->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT |
+		  tci;
+
+	scic_sds_controller_post_request(scic, command);
+}
+
+/**
+ *
+ * @sci_port: This is the struct scic_sds_port object to resume.
+ *
+ * This method will resume the port task scheduler for this port object. none
+ */
+static void
+scic_sds_port_resume_port_task_scheduler(struct scic_sds_port *port)
+{
+	u32 pts_control_value;
+
+	pts_control_value = readl(&port->port_task_scheduler_registers->control);
+	pts_control_value &= ~SCU_PTSxCR_GEN_BIT(SUSPEND);
+	writel(pts_control_value, &port->port_task_scheduler_registers->control);
+}
+
+/*
+ * ******************************************************************************
+ * *  PORT READY SUBSTATE METHODS
+ * ****************************************************************************** */
+
+/**
+ *
+ * @object: This is the object which is cast to a struct scic_sds_port object.
+ *
+ * This method will perform the actions required by the struct scic_sds_port on
+ * entering the SCIC_SDS_PORT_READY_SUBSTATE_WAITING. This function checks the
+ * port for any ready phys.  If there is at least one phy in a ready state then
+ * the port transitions to the ready operational substate. none
+ */
+static void scic_sds_port_ready_substate_waiting_enter(void *object)
+{
+	struct scic_sds_port *sci_port = object;
+
+	scic_sds_port_set_ready_state_handlers(
+		sci_port, SCIC_SDS_PORT_READY_SUBSTATE_WAITING
+		);
+
+	scic_sds_port_suspend_port_task_scheduler(sci_port);
+
+	sci_port->not_ready_reason = SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS;
+
+	if (sci_port->active_phy_mask != 0) {
+		/* At least one of the phys on the port is ready */
+		sci_base_state_machine_change_state(
+			&sci_port->ready_substate_machine,
+			SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL
+			);
+	}
+}
+
+/**
+ *
+ * @object: This is the object which is cast to a struct scic_sds_port object.
+ *
+ * This function will perform the actions required by the struct scic_sds_port
+ * on entering the SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL. This function sets
+ * the state handlers for the port object, notifies the SCI User that the port
+ * is ready, and resumes port operations. none
+ */
+static void scic_sds_port_ready_substate_operational_enter(void *object)
+{
+	u32 index;
+	struct scic_sds_port *sci_port = object;
+	struct scic_sds_controller *scic = sci_port->owning_controller;
+	struct isci_host *ihost = scic_to_ihost(scic);
+	struct isci_port *iport = sci_port_to_iport(sci_port);
+
+	scic_sds_port_set_ready_state_handlers(
+			sci_port,
+			SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL);
+
+	isci_port_ready(ihost, iport);
+
+	for (index = 0; index < SCI_MAX_PHYS; index++) {
+		if (sci_port->phy_table[index]) {
+			writel(sci_port->physical_port_index,
+				&sci_port->port_pe_configuration_register[
+					sci_port->phy_table[index]->phy_index]);
+		}
+	}
+
+	scic_sds_port_update_viit_entry(sci_port);
+
+	scic_sds_port_resume_port_task_scheduler(sci_port);
+
+	/*
+	 * Post the dummy task for the port so the hardware can schedule
+	 * io correctly
+	 */
+	scic_sds_port_post_dummy_request(sci_port);
+}
+
+/**
+ *
+ * @object: This is the object which is cast to a struct scic_sds_port object.
+ *
+ * This method will perform the actions required by the struct scic_sds_port on
+ * exiting the SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL. This function reports
+ * the port not ready and suspends the port task scheduler. none
+ */
+static void scic_sds_port_ready_substate_operational_exit(void *object)
+{
+	struct scic_sds_port *sci_port = object;
+	struct scic_sds_controller *scic = sci_port->owning_controller;
+	struct isci_host *ihost = scic_to_ihost(scic);
+	struct isci_port *iport = sci_port_to_iport(sci_port);
+
+	/*
+	 * Kill the dummy task for this port if it has not yet posted
+	 * the hardware will treat this as a NOP and just return abort
+	 * complete.
+	 */
+	scic_sds_port_abort_dummy_request(sci_port);
+
+	isci_port_not_ready(ihost, iport);
+}
+
+/*
+ * ******************************************************************************
+ * *  PORT READY CONFIGURING METHODS
+ * ****************************************************************************** */
+
+/**
+ * scic_sds_port_ready_substate_configuring_enter() -
+ * @object: This is the object which is cast to a struct scic_sds_port object.
+ *
+ * This method will perform the actions required by the struct scic_sds_port on
+ * exiting the SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL. This function reports
+ * the port not ready and suspends the port task scheduler. none
+ */
+static void scic_sds_port_ready_substate_configuring_enter(void *object)
+{
+	struct scic_sds_port *sci_port = object;
+	struct scic_sds_controller *scic = sci_port->owning_controller;
+	struct isci_host *ihost = scic_to_ihost(scic);
+	struct isci_port *iport = sci_port_to_iport(sci_port);
+
+	scic_sds_port_set_ready_state_handlers(
+			sci_port,
+			SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING);
+
+	if (sci_port->active_phy_mask == 0) {
+		isci_port_not_ready(ihost, iport);
+
+		sci_base_state_machine_change_state(
+				&sci_port->ready_substate_machine,
+				SCIC_SDS_PORT_READY_SUBSTATE_WAITING);
+	} else if (sci_port->started_request_count == 0)
+		sci_base_state_machine_change_state(
+				&sci_port->ready_substate_machine,
+				SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL);
+}
+
+static void scic_sds_port_ready_substate_configuring_exit(void *object)
+{
+	struct scic_sds_port *sci_port = object;
+
+	scic_sds_port_suspend_port_task_scheduler(sci_port);
+}
+
+/* --------------------------------------------------------------------------- */
+
+static const struct sci_base_state scic_sds_port_ready_substate_table[] = {
+	[SCIC_SDS_PORT_READY_SUBSTATE_WAITING] = {
+		.enter_state = scic_sds_port_ready_substate_waiting_enter,
+	},
+	[SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL] = {
+		.enter_state = scic_sds_port_ready_substate_operational_enter,
+		.exit_state  = scic_sds_port_ready_substate_operational_exit
+	},
+	[SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING] = {
+		.enter_state = scic_sds_port_ready_substate_configuring_enter,
+		.exit_state  = scic_sds_port_ready_substate_configuring_exit
+	},
+};
+
+/**
+ *
+ * @port: This is the struct scic_sds_port object on which the io request count will
+ *    be decremented.
+ * @device: This is the struct scic_sds_remote_device object to which the io request
+ *    is being directed.  This parameter is not required to complete this
+ *    operation.
+ * @io_request: This is the request that is being completed on this port
+ *    object.  This parameter is not required to complete this operation.
+ *
+ * This is a general complete io request handler for the struct scic_sds_port object.
+ * enum sci_status SCI_SUCCESS
+ */
+static enum sci_status scic_sds_port_general_complete_io_handler(
+	struct scic_sds_port *port,
+	struct scic_sds_remote_device *device,
+	struct scic_sds_request *io_request)
+{
+	scic_sds_port_decrement_request_count(port);
+
+	return SCI_SUCCESS;
+}
+
+/**
+ * scic_sds_port_stopped_state_start_handler() - stop a port from "started"
+ *
+ * @port: This is the struct scic_sds_port object which is cast into a
+ * struct scic_sds_port object.
+ *
+ * This function takes the struct scic_sds_port from a stopped state and
+ * attempts to start it.  To start a port it must have no assiged devices and
+ * it must have at least one phy assigned to it.  If those conditions are
+ * met then the port can transition to the ready state.
+ * enum sci_status
+ * SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION
+ * This struct scic_sds_port object could not be started because the port
+ * configuration is not valid.
+ * SCI_SUCCESS
+ * the start request is successful and the struct scic_sds_port object
+ * has transitioned to the SCI_BASE_PORT_STATE_READY.
+ */
+static enum sci_status
+scic_sds_port_stopped_state_start_handler(struct scic_sds_port *sci_port)
+{
+	struct scic_sds_controller *scic = sci_port->owning_controller;
+	struct isci_host *ihost = scic_to_ihost(scic);
+	enum sci_status status = SCI_SUCCESS;
+	u32 phy_mask;
+
+	if (sci_port->assigned_device_count > 0) {
+		/*
+		 * @todo This is a start failure operation because
+		 * there are still devices assigned to this port.
+		 * There must be no devices assigned to a port on a
+		 * start operation.
+		 */
+		return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION;
+	}
+
+	sci_port->timer_handle =
+		isci_timer_create(ihost,
+				  sci_port,
+				  scic_sds_port_timeout_handler);
+
+	if (!sci_port->timer_handle)
+		return SCI_FAILURE_INSUFFICIENT_RESOURCES;
+
+	if (sci_port->reserved_rni == SCU_DUMMY_INDEX) {
+		u16 rni = scic_sds_remote_node_table_allocate_remote_node(
+				&scic->available_remote_nodes, 1);
+
+		if (rni != SCU_DUMMY_INDEX)
+			scic_sds_port_construct_dummy_rnc(sci_port, rni);
+		else
+			status = SCI_FAILURE_INSUFFICIENT_RESOURCES;
+		sci_port->reserved_rni = rni;
+	}
+
+	if (sci_port->reserved_tci == SCU_DUMMY_INDEX) {
+		/* Allocate a TCI and remove the sequence nibble */
+		u16 tci = scic_controller_allocate_io_tag(scic);
+
+		if (tci != SCU_DUMMY_INDEX)
+			scic_sds_port_construct_dummy_task(sci_port, tci);
+		else
+			status = SCI_FAILURE_INSUFFICIENT_RESOURCES;
+		sci_port->reserved_tci = tci;
+	}
+
+	if (status == SCI_SUCCESS) {
+		phy_mask = scic_sds_port_get_phys(sci_port);
+
+		/*
+		 * There are one or more phys assigned to this port.  Make sure
+		 * the port's phy mask is in fact legal and supported by the
+		 * silicon.
+		 */
+		if (scic_sds_port_is_phy_mask_valid(sci_port, phy_mask) == true) {
+			sci_base_state_machine_change_state(
+				&sci_port->state_machine,
+				SCI_BASE_PORT_STATE_READY);
+
+			return SCI_SUCCESS;
+		} else
+			status = SCI_FAILURE;
+	}
+
+	if (status != SCI_SUCCESS)
+		scic_sds_port_destroy_dummy_resources(sci_port);
+
+	return status;
+}
+
+/*
+ * This method takes the struct scic_sds_port that is in a stopped state and handles a
+ * stop request.  This function takes no action. enum sci_status SCI_SUCCESS the
+ * stop request is successful as the struct scic_sds_port object is already stopped.
+ */
+static enum sci_status scic_sds_port_stopped_state_stop_handler(
+	struct scic_sds_port *port)
+{
+	/* We are already stopped so there is nothing to do here */
+	return SCI_SUCCESS;
+}
+
+/*
+ * This method takes the struct scic_sds_port that is in a stopped state and handles
+ * the destruct request.  The stopped state is the only state in which the
+ * struct scic_sds_port can be destroyed.  This function causes the port object to
+ * transition to the SCI_BASE_PORT_STATE_FINAL. enum sci_status SCI_SUCCESS
+ */
+static enum sci_status scic_sds_port_stopped_state_destruct_handler(
+	struct scic_sds_port *port)
+{
+	sci_base_state_machine_stop(&port->state_machine);
+
+	return SCI_SUCCESS;
+}
+
+/*
+ * This method takes the struct scic_sds_port that is in a stopped state and handles
+ * the add phy request.  In MPC mode the only time a phy can be added to a port
+ * is in the SCI_BASE_PORT_STATE_STOPPED. enum sci_status
+ * SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION is returned when the phy can not
+ * be added to the port. SCI_SUCCESS if the phy is added to the port.
+ */
+static enum sci_status scic_sds_port_stopped_state_add_phy_handler(
+	struct scic_sds_port *port,
+	struct scic_sds_phy *phy)
+{
+	struct sci_sas_address port_sas_address;
+
+	/* Read the port assigned SAS Address if there is one */
+	scic_sds_port_get_sas_address(port, &port_sas_address);
+
+	if (port_sas_address.high != 0 && port_sas_address.low != 0) {
+		struct sci_sas_address phy_sas_address;
+
+		/*
+		 * Make sure that the PHY SAS Address matches the SAS Address
+		 * for this port. */
+		scic_sds_phy_get_sas_address(phy, &phy_sas_address);
+
+		if (
+			(port_sas_address.high != phy_sas_address.high)
+			|| (port_sas_address.low  != phy_sas_address.low)
+			) {
+			return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION;
+		}
+	}
+
+	return scic_sds_port_set_phy(port, phy);
+}
+
+/*
+ * This method takes the struct scic_sds_port that is in a stopped state and handles
+ * the remove phy request.  In MPC mode the only time a phy can be removed from
+ * a port is in the SCI_BASE_PORT_STATE_STOPPED. enum sci_status
+ * SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION is returned when the phy can not
+ * be added to the port. SCI_SUCCESS if the phy is added to the port.
+ */
+static enum sci_status scic_sds_port_stopped_state_remove_phy_handler(
+	struct scic_sds_port *port,
+	struct scic_sds_phy *phy)
+{
+	return scic_sds_port_clear_phy(port, phy);
+}
+
+/*
+ * ****************************************************************************
+ * *  READY STATE HANDLERS
+ * **************************************************************************** */
+
+/*
+ * ****************************************************************************
+ * *  RESETTING STATE HANDLERS
+ * **************************************************************************** */
+
+/*
+ * ****************************************************************************
+ * *  STOPPING STATE HANDLERS
+ * **************************************************************************** */
+
+/*
+ * This method takes the struct scic_sds_port that is in a stopping state and handles
+ * the complete io request. Should the request count reach 0 then the port
+ * object will transition to the stopped state. enum sci_status SCI_SUCCESS
+ */
+static enum sci_status scic_sds_port_stopping_state_complete_io_handler(
+	struct scic_sds_port *sci_port,
+	struct scic_sds_remote_device *device,
+	struct scic_sds_request *io_request)
+{
+	scic_sds_port_decrement_request_count(sci_port);
+
+	if (sci_port->started_request_count == 0) {
+		sci_base_state_machine_change_state(&sci_port->state_machine,
+						    SCI_BASE_PORT_STATE_STOPPED);
+	}
+
+	return SCI_SUCCESS;
+}
+
+/*
+ * ****************************************************************************
+ * *  RESETTING STATE HANDLERS
+ * **************************************************************************** */
+
+/**
+ *
+ * @port: This is the port object which is being requested to stop.
+ *
+ * This method will stop a failed port.  This causes a transition to the
+ * stopping state. enum sci_status SCI_SUCCESS
+ */
+static enum sci_status scic_sds_port_reset_state_stop_handler(
+	struct scic_sds_port *port)
+{
+	sci_base_state_machine_change_state(
+		&port->state_machine,
+		SCI_BASE_PORT_STATE_STOPPING
+		);
+
+	return SCI_SUCCESS;
+}
+
+/*
+ * This method will transition a failed port to its ready state.  The port
+ * failed because a hard reset request timed out but at some time later one or
+ * more phys in the port became ready. enum sci_status SCI_SUCCESS
+ */
+static void scic_sds_port_reset_state_link_up_handler(
+	struct scic_sds_port *port,
+	struct scic_sds_phy *phy)
+{
+	/*
+	 * / @todo We should make sure that the phy that has gone link up is the same
+	 * /       one on which we sent the reset.  It is possible that the phy on
+	 * /       which we sent the reset is not the one that has gone link up and we
+	 * /       want to make sure that phy being reset comes back.  Consider the
+	 * /       case where a reset is sent but before the hardware processes the
+	 * /       reset it get a link up on the port because of a hot plug event.
+	 * /       because of the reset request this phy will go link down almost
+	 * /       immediately. */
+
+	/*
+	 * In the resetting state we don't notify the user regarding
+	 * link up and link down notifications. */
+	scic_sds_port_general_link_up_handler(port, phy, false);
+}
+
+/*
+ * This method process link down notifications that occur during a port reset
+ * operation. Link downs can occur during the reset operation. enum sci_status
+ * SCI_SUCCESS
+ */
+static void scic_sds_port_reset_state_link_down_handler(
+	struct scic_sds_port *port,
+	struct scic_sds_phy *phy)
+{
+	/*
+	 * In the resetting state we don't notify the user regarding
+	 * link up and link down notifications. */
+	scic_sds_port_deactivate_phy(port, phy, false);
+}
+
+static struct scic_sds_port_state_handler
+scic_sds_port_state_handler_table[SCI_BASE_PORT_MAX_STATES] =
+{
+	/* SCI_BASE_PORT_STATE_STOPPED */
+	{
+		scic_sds_port_stopped_state_start_handler,
+		scic_sds_port_stopped_state_stop_handler,
+		scic_sds_port_stopped_state_destruct_handler,
+		scic_sds_port_default_reset_handler,
+		scic_sds_port_stopped_state_add_phy_handler,
+		scic_sds_port_stopped_state_remove_phy_handler,
+		scic_sds_port_default_frame_handler,
+		scic_sds_port_default_event_handler,
+		scic_sds_port_default_link_up_handler,
+		scic_sds_port_default_link_down_handler,
+		scic_sds_port_default_start_io_handler,
+		scic_sds_port_default_complete_io_handler
+	},
+	/* SCI_BASE_PORT_STATE_STOPPING */
+	{
+		scic_sds_port_default_start_handler,
+		scic_sds_port_default_stop_handler,
+		scic_sds_port_default_destruct_handler,
+		scic_sds_port_default_reset_handler,
+		scic_sds_port_default_add_phy_handler,
+		scic_sds_port_default_remove_phy_handler,
+		scic_sds_port_default_frame_handler,
+		scic_sds_port_default_event_handler,
+		scic_sds_port_default_link_up_handler,
+		scic_sds_port_default_link_down_handler,
+		scic_sds_port_default_start_io_handler,
+		scic_sds_port_stopping_state_complete_io_handler
+	},
+	/* SCI_BASE_PORT_STATE_READY */
+	{
+		scic_sds_port_default_start_handler,
+		scic_sds_port_default_stop_handler,
+		scic_sds_port_default_destruct_handler,
+		scic_sds_port_default_reset_handler,
+		scic_sds_port_default_add_phy_handler,
+		scic_sds_port_default_remove_phy_handler,
+		scic_sds_port_default_frame_handler,
+		scic_sds_port_default_event_handler,
+		scic_sds_port_default_link_up_handler,
+		scic_sds_port_default_link_down_handler,
+		scic_sds_port_default_start_io_handler,
+		scic_sds_port_general_complete_io_handler
+	},
+	/* SCI_BASE_PORT_STATE_RESETTING */
+	{
+		scic_sds_port_default_start_handler,
+		scic_sds_port_reset_state_stop_handler,
+		scic_sds_port_default_destruct_handler,
+		scic_sds_port_default_reset_handler,
+		scic_sds_port_default_add_phy_handler,
+		scic_sds_port_default_remove_phy_handler,
+		scic_sds_port_default_frame_handler,
+		scic_sds_port_default_event_handler,
+		scic_sds_port_reset_state_link_up_handler,
+		scic_sds_port_reset_state_link_down_handler,
+		scic_sds_port_default_start_io_handler,
+		scic_sds_port_general_complete_io_handler
+	},
+	/* SCI_BASE_PORT_STATE_FAILED */
+	{
+		scic_sds_port_default_start_handler,
+		scic_sds_port_default_stop_handler,
+		scic_sds_port_default_destruct_handler,
+		scic_sds_port_default_reset_handler,
+		scic_sds_port_default_add_phy_handler,
+		scic_sds_port_default_remove_phy_handler,
+		scic_sds_port_default_frame_handler,
+		scic_sds_port_default_event_handler,
+		scic_sds_port_default_link_up_handler,
+		scic_sds_port_default_link_down_handler,
+		scic_sds_port_default_start_io_handler,
+		scic_sds_port_general_complete_io_handler
+	}
+};
+
+/*
+ * ******************************************************************************
+ * *  PORT STATE PRIVATE METHODS
+ * ****************************************************************************** */
+
+/**
+ *
+ * @sci_port: This is the port object which to suspend.
+ *
+ * This method will enable the SCU Port Task Scheduler for this port object but
+ * will leave the port task scheduler in a suspended state. none
+ */
+static void
+scic_sds_port_enable_port_task_scheduler(struct scic_sds_port *port)
+{
+	u32 pts_control_value;
+
+	pts_control_value = readl(&port->port_task_scheduler_registers->control);
+	pts_control_value |= SCU_PTSxCR_GEN_BIT(ENABLE) | SCU_PTSxCR_GEN_BIT(SUSPEND);
+	writel(pts_control_value, &port->port_task_scheduler_registers->control);
+}
+
+/**
+ *
+ * @sci_port: This is the port object which to resume.
+ *
+ * This method will disable the SCU port task scheduler for this port object.
+ * none
+ */
+static void
+scic_sds_port_disable_port_task_scheduler(struct scic_sds_port *port)
+{
+	u32 pts_control_value;
+
+	pts_control_value = readl(&port->port_task_scheduler_registers->control);
+	pts_control_value &=
+		~(SCU_PTSxCR_GEN_BIT(ENABLE) | SCU_PTSxCR_GEN_BIT(SUSPEND));
+	writel(pts_control_value, &port->port_task_scheduler_registers->control);
+}
+
+static void scic_sds_port_post_dummy_remote_node(struct scic_sds_port *sci_port)
+{
+	struct scic_sds_controller *scic = sci_port->owning_controller;
+	u8 phys_index = sci_port->physical_port_index;
+	union scu_remote_node_context *rnc;
+	u16 rni = sci_port->reserved_rni;
+	u32 command;
+
+	rnc = &scic->remote_node_context_table[rni];
+	rnc->ssp.is_valid = true;
+
+	command = SCU_CONTEXT_COMMAND_POST_RNC_32 |
+		  phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni;
+
+	scic_sds_controller_post_request(scic, command);
+
+	/* ensure hardware has seen the post rnc command and give it
+	 * ample time to act before sending the suspend
+	 */
+	readl(&scic->smu_registers->interrupt_status); /* flush */
+	udelay(10);
+
+	command = SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX_RX |
+		  phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni;
+
+	scic_sds_controller_post_request(scic, command);
+}
+
+static void scic_sds_port_invalidate_dummy_remote_node(struct scic_sds_port *sci_port)
+{
+	struct scic_sds_controller *scic = sci_port->owning_controller;
+	u8 phys_index = sci_port->physical_port_index;
+	union scu_remote_node_context *rnc;
+	u16 rni = sci_port->reserved_rni;
+	u32 command;
+
+	rnc = &scic->remote_node_context_table[rni];
+
+	rnc->ssp.is_valid = false;
+
+	/* ensure the preceding tc abort request has reached the
+	 * controller and give it ample time to act before posting the rnc
+	 * invalidate
+	 */
+	readl(&scic->smu_registers->interrupt_status); /* flush */
+	udelay(10);
+
+	command = SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE |
+		  phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni;
+
+	scic_sds_controller_post_request(scic, command);
+}
+
+/*
+ * ******************************************************************************
+ * *  PORT STATE METHODS
+ * ****************************************************************************** */
+
+/**
+ *
+ * @object: This is the object which is cast to a struct scic_sds_port object.
+ *
+ * This method will perform the actions required by the struct scic_sds_port on
+ * entering the SCI_BASE_PORT_STATE_STOPPED. This function sets the stopped
+ * state handlers for the struct scic_sds_port object and disables the port task
+ * scheduler in the hardware. none
+ */
+static void scic_sds_port_stopped_state_enter(void *object)
+{
+	struct scic_sds_port *sci_port = object;
+
+	scic_sds_port_set_base_state_handlers(
+		sci_port, SCI_BASE_PORT_STATE_STOPPED
+		);
+
+	if (
+		SCI_BASE_PORT_STATE_STOPPING
+		== sci_port->state_machine.previous_state_id
+		) {
+		/*
+		 * If we enter this state becasuse of a request to stop
+		 * the port then we want to disable the hardwares port
+		 * task scheduler. */
+		scic_sds_port_disable_port_task_scheduler(sci_port);
+	}
+}
+
+/**
+ *
+ * @object: This is the object which is cast to a struct scic_sds_port object.
+ *
+ * This method will perform the actions required by the struct scic_sds_port on
+ * exiting the SCI_BASE_STATE_STOPPED. This function enables the SCU hardware
+ * port task scheduler. none
+ */
+static void scic_sds_port_stopped_state_exit(void *object)
+{
+	struct scic_sds_port *sci_port = object;
+
+	/* Enable and suspend the port task scheduler */
+	scic_sds_port_enable_port_task_scheduler(sci_port);
+}
+
+/**
+ * scic_sds_port_ready_state_enter -
+ * @object: This is the object which is cast to a struct scic_sds_port object.
+ *
+ * This method will perform the actions required by the struct scic_sds_port on
+ * entering the SCI_BASE_PORT_STATE_READY. This function sets the ready state
+ * handlers for the struct scic_sds_port object, reports the port object as
+ * not ready and starts the ready substate machine. none
+ */
+static void scic_sds_port_ready_state_enter(void *object)
+{
+	struct scic_sds_port *sci_port = object;
+	struct scic_sds_controller *scic = sci_port->owning_controller;
+	struct isci_host *ihost = scic_to_ihost(scic);
+	struct isci_port *iport = sci_port_to_iport(sci_port);
+	u32 prev_state;
+
+	/* Put the ready state handlers in place though they will not be there long */
+	scic_sds_port_set_base_state_handlers(sci_port, SCI_BASE_PORT_STATE_READY);
+
+	prev_state = sci_port->state_machine.previous_state_id;
+	if (prev_state  == SCI_BASE_PORT_STATE_RESETTING)
+		isci_port_hard_reset_complete(iport, SCI_SUCCESS);
+	else
+		isci_port_not_ready(ihost, iport);
+
+	/* Post and suspend the dummy remote node context for this port. */
+	scic_sds_port_post_dummy_remote_node(sci_port);
+
+	/* Start the ready substate machine */
+	sci_base_state_machine_start(&sci_port->ready_substate_machine);
+}
+
+static void scic_sds_port_ready_state_exit(void *object)
+{
+	struct scic_sds_port *sci_port = object;
+
+	sci_base_state_machine_stop(&sci_port->ready_substate_machine);
+	scic_sds_port_invalidate_dummy_remote_node(sci_port);
+}
+
+/**
+ *
+ * @object: This is the object which is cast to a struct scic_sds_port object.
+ *
+ * This method will perform the actions required by the struct scic_sds_port on
+ * entering the SCI_BASE_PORT_STATE_RESETTING. This function sets the resetting
+ * state handlers for the struct scic_sds_port object. none
+ */
+static void scic_sds_port_resetting_state_enter(void *object)
+{
+	struct scic_sds_port *sci_port = object;
+
+	scic_sds_port_set_base_state_handlers(
+		sci_port, SCI_BASE_PORT_STATE_RESETTING
+		);
+}
+
+/**
+ *
+ * @object: This is the object which is cast to a struct scic_sds_port object.
+ *
+ * This function will perform the actions required by the
+ * struct scic_sds_port on
+ * exiting the SCI_BASE_STATE_RESETTING. This function does nothing. none
+ */
+static inline void scic_sds_port_resetting_state_exit(void *object)
+{
+	struct scic_sds_port *sci_port = object;
+
+	isci_timer_stop(sci_port->timer_handle);
+}
+
+/**
+ *
+ * @object: This is the void object which is cast to a
+ * struct scic_sds_port object.
+ *
+ * This method will perform the actions required by the struct scic_sds_port on
+ * entering the SCI_BASE_PORT_STATE_STOPPING. This function sets the stopping
+ * state handlers for the struct scic_sds_port object. none
+ */
+static void scic_sds_port_stopping_state_enter(void *object)
+{
+	struct scic_sds_port *sci_port = object;
+
+	scic_sds_port_set_base_state_handlers(
+		sci_port, SCI_BASE_PORT_STATE_STOPPING
+		);
+}
+
+/**
+ *
+ * @object: This is the object which is cast to a struct scic_sds_port object.
+ *
+ * This function will perform the actions required by the
+ * struct scic_sds_port on
+ * exiting the SCI_BASE_STATE_STOPPING. This function does nothing. none
+ */
+static inline void
+scic_sds_port_stopping_state_exit(void *object)
+{
+	struct scic_sds_port *sci_port = object;
+
+	isci_timer_stop(sci_port->timer_handle);
+
+	scic_sds_port_destroy_dummy_resources(sci_port);
+}
+
+/**
+ *
+ * @object: This is the object which is cast to a struct scic_sds_port object.
+ *
+ * This function will perform the actions required by the
+ * struct scic_sds_port on
+ * entering the SCI_BASE_PORT_STATE_STOPPING. This function sets the stopping
+ * state handlers for the struct scic_sds_port object. none
+ */
+static void scic_sds_port_failed_state_enter(void *object)
+{
+	struct scic_sds_port *sci_port = object;
+	struct isci_port *iport = sci_port_to_iport(sci_port);
+
+	scic_sds_port_set_base_state_handlers(sci_port,
+					      SCI_BASE_PORT_STATE_FAILED);
+
+	isci_port_hard_reset_complete(iport, SCI_FAILURE_TIMEOUT);
+}
+
+/* --------------------------------------------------------------------------- */
+
+static const struct sci_base_state scic_sds_port_state_table[] = {
+	[SCI_BASE_PORT_STATE_STOPPED] = {
+		.enter_state = scic_sds_port_stopped_state_enter,
+		.exit_state  = scic_sds_port_stopped_state_exit
+	},
+	[SCI_BASE_PORT_STATE_STOPPING] = {
+		.enter_state = scic_sds_port_stopping_state_enter,
+		.exit_state  = scic_sds_port_stopping_state_exit
+	},
+	[SCI_BASE_PORT_STATE_READY] = {
+		.enter_state = scic_sds_port_ready_state_enter,
+		.exit_state  = scic_sds_port_ready_state_exit
+	},
+	[SCI_BASE_PORT_STATE_RESETTING] = {
+		.enter_state = scic_sds_port_resetting_state_enter,
+		.exit_state  = scic_sds_port_resetting_state_exit
+	},
+	[SCI_BASE_PORT_STATE_FAILED] = {
+		.enter_state = scic_sds_port_failed_state_enter,
+	}
+};
+
+void scic_sds_port_construct(struct scic_sds_port *sci_port, u8 index,
+			     struct scic_sds_controller *scic)
+{
+	sci_base_state_machine_construct(&sci_port->state_machine,
+					 sci_port,
+					 scic_sds_port_state_table,
+					 SCI_BASE_PORT_STATE_STOPPED);
+
+	sci_base_state_machine_start(&sci_port->state_machine);
+
+	sci_base_state_machine_construct(&sci_port->ready_substate_machine,
+					 sci_port,
+					 scic_sds_port_ready_substate_table,
+					 SCIC_SDS_PORT_READY_SUBSTATE_WAITING);
+
+	sci_port->logical_port_index  = SCIC_SDS_DUMMY_PORT;
+	sci_port->physical_port_index = index;
+	sci_port->active_phy_mask     = 0;
+
+	sci_port->owning_controller = scic;
+
+	sci_port->started_request_count = 0;
+	sci_port->assigned_device_count = 0;
+
+	sci_port->reserved_rni = SCU_DUMMY_INDEX;
+	sci_port->reserved_tci = SCU_DUMMY_INDEX;
+
+	sci_port->timer_handle = NULL;
+	sci_port->port_task_scheduler_registers = NULL;
+
+	for (index = 0; index < SCI_MAX_PHYS; index++)
+		sci_port->phy_table[index] = NULL;
+}
+
+void isci_port_init(struct isci_port *iport, struct isci_host *ihost, int index)
+{
+	INIT_LIST_HEAD(&iport->remote_dev_list);
+	INIT_LIST_HEAD(&iport->domain_dev_list);
+	spin_lock_init(&iport->state_lock);
+	init_completion(&iport->start_complete);
+	iport->isci_host = ihost;
+	isci_port_change_state(iport, isci_freed);
+}
+
+/**
+ * isci_port_get_state() - This function gets the status of the port object.
+ * @isci_port: This parameter points to the isci_port object
+ *
+ * status of the object as a isci_status enum.
+ */
+enum isci_status isci_port_get_state(
+	struct isci_port *isci_port)
+{
+	return isci_port->status;
+}
+
+static void isci_port_bc_change_received(struct isci_host *ihost,
+					 struct scic_sds_port *sci_port,
+					 struct scic_sds_phy *sci_phy)
+{
+	struct isci_phy *iphy = sci_phy_to_iphy(sci_phy);
+
+	dev_dbg(&ihost->pdev->dev, "%s: iphy = %p, sas_phy = %p\n",
+		__func__, iphy, &iphy->sas_phy);
+
+	ihost->sas_ha.notify_port_event(&iphy->sas_phy, PORTE_BROADCAST_RCVD);
+	scic_port_enable_broadcast_change_notification(sci_port);
+}
+
+void scic_sds_port_broadcast_change_received(
+	struct scic_sds_port *sci_port,
+	struct scic_sds_phy *sci_phy)
+{
+	struct scic_sds_controller *scic = sci_port->owning_controller;
+	struct isci_host *ihost = scic_to_ihost(scic);
+
+	/* notify the user. */
+	isci_port_bc_change_received(ihost, sci_port, sci_phy);
+}
+
 int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *iport,
 				 struct isci_phy *iphy)
 {
@@ -359,9 +2675,24 @@ int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *ipor
 	return ret;
 }
 
-void isci_port_stop_complete(struct scic_sds_controller *scic,
-					  struct scic_sds_port *sci_port,
-					  enum sci_status completion_status)
+/**
+ * isci_port_deformed() - This function is called by libsas when a port becomes
+ *    inactive.
+ * @phy: This parameter specifies the libsas phy with the inactive port.
+ *
+ */
+void isci_port_deformed(struct asd_sas_phy *phy)
 {
-	dev_dbg(&scic_to_ihost(scic)->pdev->dev, "Port stop complete\n");
+	pr_debug("%s: sas_phy = %p\n", __func__, phy);
+}
+
+/**
+ * isci_port_formed() - This function is called by libsas when a port becomes
+ *    active.
+ * @phy: This parameter specifies the libsas phy with the active port.
+ *
+ */
+void isci_port_formed(struct asd_sas_phy *phy)
+{
+	pr_debug("%s: sas_phy = %p, sas_port = %p\n", __func__, phy, phy->port);
 }