diff options
author | Jeff Skirvin <jeffrey.d.skirvin@intel.com> | 2011-10-27 15:05:16 -0700 |
---|---|---|
committer | James Bottomley <JBottomley@Parallels.com> | 2011-10-31 13:17:48 +0400 |
commit | 98145cb722b51ccc3ba27166c9803545accba950 (patch) | |
tree | 714aaae27bd45da93793729f3321c6409aad45ae /drivers/scsi/isci | |
parent | db49c2d037d50dfc67b29a4e013d6250ca97c3aa (diff) |
[SCSI] isci: Fix task management for SMP, SATA and on dev remove.
libsas uses the LLDD abort task interface to handle I/O timeouts
in the SATA/STP and SMP discovery paths, so this change will terminate
STP/SMP requests. Also, if the device is gone, the lldd will prevent
libsas from further escalations in the error handler.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Diffstat (limited to 'drivers/scsi/isci')
-rw-r--r-- | drivers/scsi/isci/remote_device.c | 47 | ||||
-rw-r--r-- | drivers/scsi/isci/remote_device.h | 2 | ||||
-rw-r--r-- | drivers/scsi/isci/task.c | 169 | ||||
-rw-r--r-- | drivers/scsi/isci/task.h | 33 |
4 files changed, 67 insertions, 184 deletions
diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index fbf9ce28c3f..20c77edd471 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -1438,53 +1438,6 @@ int isci_remote_device_found(struct domain_device *domain_dev) return status == SCI_SUCCESS ? 0 : -ENODEV; } -/** - * isci_device_is_reset_pending() - This function will check if there is any - * pending reset condition on the device. - * @request: This parameter is the isci_device object. - * - * true if there is a reset pending for the device. - */ -bool isci_device_is_reset_pending( - struct isci_host *isci_host, - struct isci_remote_device *isci_device) -{ - struct isci_request *isci_request; - struct isci_request *tmp_req; - bool reset_is_pending = false; - unsigned long flags; - - dev_dbg(&isci_host->pdev->dev, - "%s: isci_device = %p\n", __func__, isci_device); - - spin_lock_irqsave(&isci_host->scic_lock, flags); - - /* Check for reset on all pending requests. */ - list_for_each_entry_safe(isci_request, tmp_req, - &isci_device->reqs_in_process, dev_node) { - dev_dbg(&isci_host->pdev->dev, - "%s: isci_device = %p request = %p\n", - __func__, isci_device, isci_request); - - if (isci_request->ttype == io_task) { - struct sas_task *task = isci_request_access_task( - isci_request); - - spin_lock(&task->task_state_lock); - if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET) - reset_is_pending = true; - spin_unlock(&task->task_state_lock); - } - } - - spin_unlock_irqrestore(&isci_host->scic_lock, flags); - - dev_dbg(&isci_host->pdev->dev, - "%s: isci_device = %p reset_is_pending = %d\n", - __func__, isci_device, reset_is_pending); - - return reset_is_pending; -} /** * isci_device_clear_reset_pending() - This function will clear if any pending diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index e1747ea0d0e..bee6dd2d0fe 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -132,8 +132,6 @@ void isci_remote_device_nuke_requests(struct isci_host *ihost, struct isci_remote_device *idev); void isci_remote_device_gone(struct domain_device *domain_dev); int isci_remote_device_found(struct domain_device *domain_dev); -bool isci_device_is_reset_pending(struct isci_host *ihost, - struct isci_remote_device *idev); void isci_device_clear_reset_pending(struct isci_host *ihost, struct isci_remote_device *idev); /** diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index c1f439bed71..ec85beb1f97 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -920,22 +920,14 @@ int isci_task_lu_reset(struct domain_device *domain_device, u8 *lun) "%s: domain_device=%p, isci_host=%p; isci_device=%p\n", __func__, domain_device, isci_host, isci_device); - if (isci_device) - set_bit(IDEV_EH, &isci_device->flags); + if (!isci_device) { + /* If the device is gone, stop the escalations. */ + dev_dbg(&isci_host->pdev->dev, "%s: No dev\n", __func__); - /* If there is a device reset pending on any request in the - * device's list, fail this LUN reset request in order to - * escalate to the device reset. - */ - if (!isci_device || - isci_device_is_reset_pending(isci_host, isci_device)) { - dev_dbg(&isci_host->pdev->dev, - "%s: No dev (%p), or " - "RESET PENDING: domain_device=%p\n", - __func__, isci_device, domain_device); - ret = TMF_RESP_FUNC_FAILED; + ret = TMF_RESP_FUNC_COMPLETE; goto out; } + set_bit(IDEV_EH, &isci_device->flags); /* Send the task management part of the reset. */ if (sas_protocol_ata(domain_device->tproto)) { @@ -1044,7 +1036,7 @@ int isci_task_abort_task(struct sas_task *task) struct isci_tmf tmf; int ret = TMF_RESP_FUNC_FAILED; unsigned long flags; - bool any_dev_reset = false; + int perform_termination = 0; /* Get the isci_request reference from the task. Note that * this check does not depend on the pending request list @@ -1066,89 +1058,34 @@ int isci_task_abort_task(struct sas_task *task) spin_unlock_irqrestore(&isci_host->scic_lock, flags); dev_dbg(&isci_host->pdev->dev, - "%s: task = %p\n", __func__, task); - - if (!isci_device || !old_request) - goto out; + "%s: dev = %p, task = %p, old_request == %p\n", + __func__, isci_device, task, old_request); - set_bit(IDEV_EH, &isci_device->flags); - - /* This version of the driver will fail abort requests for - * SATA/STP. Failing the abort request this way will cause the - * SCSI error handler thread to escalate to LUN reset - */ - if (sas_protocol_ata(task->task_proto)) { - dev_dbg(&isci_host->pdev->dev, - " task %p is for a STP/SATA device;" - " returning TMF_RESP_FUNC_FAILED\n" - " to cause a LUN reset...\n", task); - goto out; - } - - dev_dbg(&isci_host->pdev->dev, - "%s: old_request == %p\n", __func__, old_request); - - any_dev_reset = isci_device_is_reset_pending(isci_host, isci_device); - - spin_lock_irqsave(&task->task_state_lock, flags); - - any_dev_reset = any_dev_reset || (task->task_state_flags & SAS_TASK_NEED_DEV_RESET); + if (isci_device) + set_bit(IDEV_EH, &isci_device->flags); - /* If the extraction of the request reference from the task - * failed, then the request has been completed (or if there is a - * pending reset then this abort request function must be failed - * in order to escalate to the target reset). + /* Device reset conditions signalled in task_state_flags are the + * responsbility of libsas to observe at the start of the error + * handler thread. */ - if ((old_request == NULL) || any_dev_reset) { - - /* If the device reset task flag is set, fail the task - * management request. Otherwise, the original request - * has completed. - */ - if (any_dev_reset) { - - /* Turn off the task's DONE to make sure this - * task is escalated to a target reset. - */ - task->task_state_flags &= ~SAS_TASK_STATE_DONE; - - /* Make the reset happen as soon as possible. */ - task->task_state_flags |= SAS_TASK_NEED_DEV_RESET; - - spin_unlock_irqrestore(&task->task_state_lock, flags); - - /* Fail the task management request in order to - * escalate to the target reset. - */ - ret = TMF_RESP_FUNC_FAILED; - - dev_dbg(&isci_host->pdev->dev, - "%s: Failing task abort in order to " - "escalate to target reset because\n" - "SAS_TASK_NEED_DEV_RESET is set for " - "task %p on dev %p\n", - __func__, task, isci_device); - - - } else { - /* The request has already completed and there - * is nothing to do here other than to set the task - * done bit, and indicate that the task abort function - * was sucessful. - */ - isci_set_task_doneflags(task); - - spin_unlock_irqrestore(&task->task_state_lock, flags); + if (!isci_device || !old_request) { + /* The request has already completed and there + * is nothing to do here other than to set the task + * done bit, and indicate that the task abort function + * was sucessful. + */ + spin_lock_irqsave(&task->task_state_lock, flags); + task->task_state_flags |= SAS_TASK_STATE_DONE; + task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR | + SAS_TASK_STATE_PENDING); + spin_unlock_irqrestore(&task->task_state_lock, flags); - ret = TMF_RESP_FUNC_COMPLETE; + ret = TMF_RESP_FUNC_COMPLETE; - dev_dbg(&isci_host->pdev->dev, - "%s: abort task not needed for %p\n", - __func__, task); - } + dev_dbg(&isci_host->pdev->dev, + "%s: abort task not needed for %p\n", + __func__, task); goto out; - } else { - spin_unlock_irqrestore(&task->task_state_lock, flags); } spin_lock_irqsave(&isci_host->scic_lock, flags); @@ -1177,24 +1114,44 @@ int isci_task_abort_task(struct sas_task *task) goto out; } if (task->task_proto == SAS_PROTOCOL_SMP || + sas_protocol_ata(task->task_proto) || test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags)) { spin_unlock_irqrestore(&isci_host->scic_lock, flags); dev_dbg(&isci_host->pdev->dev, - "%s: SMP request (%d)" + "%s: %s request" " or complete_in_target (%d), thus no TMF\n", - __func__, (task->task_proto == SAS_PROTOCOL_SMP), + __func__, + ((task->task_proto == SAS_PROTOCOL_SMP) + ? "SMP" + : (sas_protocol_ata(task->task_proto) + ? "SATA/STP" + : "<other>") + ), test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags)); - /* Set the state on the task. */ - isci_task_all_done(task); - - ret = TMF_RESP_FUNC_COMPLETE; + if (test_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags)) { + spin_lock_irqsave(&task->task_state_lock, flags); + task->task_state_flags |= SAS_TASK_STATE_DONE; + task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR | + SAS_TASK_STATE_PENDING); + spin_unlock_irqrestore(&task->task_state_lock, flags); + ret = TMF_RESP_FUNC_COMPLETE; + } else { + spin_lock_irqsave(&task->task_state_lock, flags); + task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR | + SAS_TASK_STATE_PENDING); + spin_unlock_irqrestore(&task->task_state_lock, flags); + } - /* Stopping and SMP devices are not sent a TMF, and are not - * reset, but the outstanding I/O request is terminated below. + /* STP and SMP devices are not sent a TMF, but the + * outstanding I/O request is terminated below. This is + * because SATA/STP and SMP discovery path timeouts directly + * call the abort task interface for cleanup. */ + perform_termination = 1; + } else { /* Fill in the tmf stucture */ isci_task_build_abort_task_tmf(&tmf, isci_tmf_ssp_task_abort, @@ -1203,22 +1160,24 @@ int isci_task_abort_task(struct sas_task *task) spin_unlock_irqrestore(&isci_host->scic_lock, flags); - #define ISCI_ABORT_TASK_TIMEOUT_MS 500 /* half second timeout. */ + #define ISCI_ABORT_TASK_TIMEOUT_MS 500 /* 1/2 second timeout */ ret = isci_task_execute_tmf(isci_host, isci_device, &tmf, ISCI_ABORT_TASK_TIMEOUT_MS); - if (ret != TMF_RESP_FUNC_COMPLETE) + if (ret == TMF_RESP_FUNC_COMPLETE) + perform_termination = 1; + else dev_dbg(&isci_host->pdev->dev, - "%s: isci_task_send_tmf failed\n", - __func__); + "%s: isci_task_send_tmf failed\n", __func__); } - if (ret == TMF_RESP_FUNC_COMPLETE) { + if (perform_termination) { set_bit(IREQ_COMPLETE_IN_TARGET, &old_request->flags); /* Clean up the request on our side, and wait for the aborted * I/O to complete. */ - isci_terminate_request_core(isci_host, isci_device, old_request); + isci_terminate_request_core(isci_host, isci_device, + old_request); } /* Make sure we do not leave a reference to aborted_io_completion */ diff --git a/drivers/scsi/isci/task.h b/drivers/scsi/isci/task.h index c9ccd0b5ff5..bc78c0a41d5 100644 --- a/drivers/scsi/isci/task.h +++ b/drivers/scsi/isci/task.h @@ -226,35 +226,6 @@ enum isci_completion_selection { isci_perform_error_io_completion /* Use sas_task_abort */ }; -static inline void isci_set_task_doneflags( - struct sas_task *task) -{ - /* Since no futher action will be taken on this task, - * make sure to mark it complete from the lldd perspective. - */ - task->task_state_flags |= SAS_TASK_STATE_DONE; - task->task_state_flags &= ~SAS_TASK_AT_INITIATOR; - task->task_state_flags &= ~SAS_TASK_STATE_PENDING; -} -/** - * isci_task_all_done() - This function clears the task bits to indicate the - * LLDD is done with the task. - * - * - */ -static inline void isci_task_all_done( - struct sas_task *task) -{ - unsigned long flags; - - /* Since no futher action will be taken on this task, - * make sure to mark it complete from the lldd perspective. - */ - spin_lock_irqsave(&task->task_state_lock, flags); - isci_set_task_doneflags(task); - spin_unlock_irqrestore(&task->task_state_lock, flags); -} - /** * isci_task_set_completion_status() - This function sets the completion status * for the request. @@ -336,7 +307,9 @@ isci_task_set_completion_status( /* Fall through to the normal case... */ case isci_perform_normal_io_completion: /* Normal notification (task_done) */ - isci_set_task_doneflags(task); + task->task_state_flags |= SAS_TASK_STATE_DONE; + task->task_state_flags &= ~(SAS_TASK_AT_INITIATOR | + SAS_TASK_STATE_PENDING); break; default: WARN_ONCE(1, "unknown task_notification_selection: %d\n", |