diff options
author | Jeff Garzik <jgarzik@pobox.com> | 2005-08-29 15:59:42 -0400 |
---|---|---|
committer | Jeff Garzik <jgarzik@pobox.com> | 2005-08-29 15:59:42 -0400 |
commit | 70d374ea9907036e15574a5ce89219edd5baee10 (patch) | |
tree | b858bb4a841eb91b1d91b41c33698d05fa7bfb37 /drivers/scsi/libata-core.c | |
parent | aa7e16d6b88b3b38db0d2ee49ed5e44e7b2045ec (diff) | |
parent | bf4e70e54cf31dcca48d279c7f7e71328eebe749 (diff) |
Merge /spare/repo/linux-2.6/
Diffstat (limited to 'drivers/scsi/libata-core.c')
-rw-r--r-- | drivers/scsi/libata-core.c | 247 |
1 files changed, 207 insertions, 40 deletions
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 4154e5b6bad..dee4b12b034 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -1314,12 +1314,12 @@ static inline u8 ata_dev_knobble(struct ata_port *ap) /** * ata_dev_config - Run device specific handlers and check for * SATA->PATA bridges - * @ap: Bus + * @ap: Bus * @i: Device * * LOCKING: */ - + void ata_dev_config(struct ata_port *ap, unsigned int i) { /* limit bridge transfers to udma5, 200 sectors */ @@ -2387,6 +2387,27 @@ static int ata_sg_setup(struct ata_queued_cmd *qc) } /** + * ata_poll_qc_complete - turn irq back on and finish qc + * @qc: Command to complete + * @drv_stat: ATA status register content + * + * LOCKING: + * None. (grabs host lock) + */ + +void ata_poll_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) +{ + struct ata_port *ap = qc->ap; + unsigned long flags; + + spin_lock_irqsave(&ap->host_set->lock, flags); + ap->flags &= ~ATA_FLAG_NOINTR; + ata_irq_on(ap); + ata_qc_complete(qc, drv_stat); + spin_unlock_irqrestore(&ap->host_set->lock, flags); +} + +/** * ata_pio_poll - * @ap: * @@ -2448,11 +2469,10 @@ static void ata_pio_complete (struct ata_port *ap) u8 drv_stat; /* - * This is purely hueristic. This is a fast path. - * Sometimes when we enter, BSY will be cleared in - * a chk-status or two. If not, the drive is probably seeking - * or something. Snooze for a couple msecs, then - * chk-status again. If still busy, fall back to + * This is purely heuristic. This is a fast path. Sometimes when + * we enter, BSY will be cleared in a chk-status or two. If not, + * the drive is probably seeking or something. Snooze for a couple + * msecs, then chk-status again. If still busy, fall back to * PIO_ST_POLL state. */ drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 10); @@ -2477,9 +2497,7 @@ static void ata_pio_complete (struct ata_port *ap) ap->pio_task_state = PIO_ST_IDLE; - ata_irq_on(ap); - - ata_qc_complete(qc, drv_stat); + ata_poll_qc_complete(qc, drv_stat); } @@ -2504,6 +2522,20 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) #endif /* __BIG_ENDIAN */ } +/** + * ata_mmio_data_xfer - Transfer data by MMIO + * @ap: port to read/write + * @buf: data buffer + * @buflen: buffer length + * @do_write: read/write + * + * Transfer data from/to the device data register by MMIO. + * + * LOCKING: + * Inherited from caller. + * + */ + static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf, unsigned int buflen, int write_data) { @@ -2512,6 +2544,7 @@ static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf, u16 *buf16 = (u16 *) buf; void __iomem *mmio = (void __iomem *)ap->ioaddr.data_addr; + /* Transfer multiple of 2 bytes */ if (write_data) { for (i = 0; i < words; i++) writew(le16_to_cpu(buf16[i]), mmio); @@ -2519,19 +2552,76 @@ static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf, for (i = 0; i < words; i++) buf16[i] = cpu_to_le16(readw(mmio)); } + + /* Transfer trailing 1 byte, if any. */ + if (unlikely(buflen & 0x01)) { + u16 align_buf[1] = { 0 }; + unsigned char *trailing_buf = buf + buflen - 1; + + if (write_data) { + memcpy(align_buf, trailing_buf, 1); + writew(le16_to_cpu(align_buf[0]), mmio); + } else { + align_buf[0] = cpu_to_le16(readw(mmio)); + memcpy(trailing_buf, align_buf, 1); + } + } } +/** + * ata_pio_data_xfer - Transfer data by PIO + * @ap: port to read/write + * @buf: data buffer + * @buflen: buffer length + * @do_write: read/write + * + * Transfer data from/to the device data register by PIO. + * + * LOCKING: + * Inherited from caller. + * + */ + static void ata_pio_data_xfer(struct ata_port *ap, unsigned char *buf, unsigned int buflen, int write_data) { - unsigned int dwords = buflen >> 1; + unsigned int words = buflen >> 1; + /* Transfer multiple of 2 bytes */ if (write_data) - outsw(ap->ioaddr.data_addr, buf, dwords); + outsw(ap->ioaddr.data_addr, buf, words); else - insw(ap->ioaddr.data_addr, buf, dwords); + insw(ap->ioaddr.data_addr, buf, words); + + /* Transfer trailing 1 byte, if any. */ + if (unlikely(buflen & 0x01)) { + u16 align_buf[1] = { 0 }; + unsigned char *trailing_buf = buf + buflen - 1; + + if (write_data) { + memcpy(align_buf, trailing_buf, 1); + outw(le16_to_cpu(align_buf[0]), ap->ioaddr.data_addr); + } else { + align_buf[0] = cpu_to_le16(inw(ap->ioaddr.data_addr)); + memcpy(trailing_buf, align_buf, 1); + } + } } +/** + * ata_data_xfer - Transfer data from/to the data register. + * @ap: port to read/write + * @buf: data buffer + * @buflen: buffer length + * @do_write: read/write + * + * Transfer data from/to the device data register. + * + * LOCKING: + * Inherited from caller. + * + */ + static void ata_data_xfer(struct ata_port *ap, unsigned char *buf, unsigned int buflen, int do_write) { @@ -2541,6 +2631,16 @@ static void ata_data_xfer(struct ata_port *ap, unsigned char *buf, ata_pio_data_xfer(ap, buf, buflen, do_write); } +/** + * ata_pio_sector - Transfer ATA_SECT_SIZE (512 bytes) of data. + * @qc: Command on going + * + * Transfer ATA_SECT_SIZE of data from/to the ATA device. + * + * LOCKING: + * Inherited from caller. + */ + static void ata_pio_sector(struct ata_queued_cmd *qc) { int do_write = (qc->tf.flags & ATA_TFLAG_WRITE); @@ -2579,6 +2679,18 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) kunmap(page); } +/** + * __atapi_pio_bytes - Transfer data from/to the ATAPI device. + * @qc: Command on going + * @bytes: number of bytes + * + * Transfer Transfer data from/to the ATAPI device. + * + * LOCKING: + * Inherited from caller. + * + */ + static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) { int do_write = (qc->tf.flags & ATA_TFLAG_WRITE); @@ -2588,10 +2700,33 @@ static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) unsigned char *buf; unsigned int offset, count; - if (qc->curbytes == qc->nbytes - bytes) + if (qc->curbytes + bytes >= qc->nbytes) ap->pio_task_state = PIO_ST_LAST; next_sg: + if (unlikely(qc->cursg >= qc->n_elem)) { + /* + * The end of qc->sg is reached and the device expects + * more data to transfer. In order not to overrun qc->sg + * and fulfill length specified in the byte count register, + * - for read case, discard trailing data from the device + * - for write case, padding zero data to the device + */ + u16 pad_buf[1] = { 0 }; + unsigned int words = bytes >> 1; + unsigned int i; + + if (words) /* warning if bytes > 1 */ + printk(KERN_WARNING "ata%u: %u bytes trailing data\n", + ap->id, bytes); + + for (i = 0; i < words; i++) + ata_data_xfer(ap, (unsigned char*)pad_buf, 2, do_write); + + ap->pio_task_state = PIO_ST_LAST; + return; + } + sg = &qc->sg[qc->cursg]; page = sg->page; @@ -2625,11 +2760,21 @@ next_sg: kunmap(page); - if (bytes) { + if (bytes) goto next_sg; - } } +/** + * atapi_pio_bytes - Transfer data from/to the ATAPI device. + * @qc: Command on going + * + * Transfer Transfer data from/to the ATAPI device. + * + * LOCKING: + * Inherited from caller. + * + */ + static void atapi_pio_bytes(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; @@ -2702,9 +2847,7 @@ static void ata_pio_block(struct ata_port *ap) if ((status & ATA_DRQ) == 0) { ap->pio_task_state = PIO_ST_IDLE; - ata_irq_on(ap); - - ata_qc_complete(qc, status); + ata_poll_qc_complete(qc, status); return; } @@ -2734,9 +2877,7 @@ static void ata_pio_error(struct ata_port *ap) ap->pio_task_state = PIO_ST_IDLE; - ata_irq_on(ap); - - ata_qc_complete(qc, drv_stat | ATA_ERR); + ata_poll_qc_complete(qc, drv_stat | ATA_ERR); } static void ata_pio_task(void *_data) @@ -2842,8 +2983,10 @@ static void atapi_request_sense(struct ata_port *ap, struct ata_device *dev, static void ata_qc_timeout(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; + struct ata_host_set *host_set = ap->host_set; struct ata_device *dev = qc->dev; u8 host_stat = 0, drv_stat; + unsigned long flags; DPRINTK("ENTER\n"); @@ -2854,7 +2997,9 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) if (!(cmd->eh_eflags & SCSI_EH_CANCEL_CMD)) { /* finish completing original command */ + spin_lock_irqsave(&host_set->lock, flags); __ata_qc_complete(qc); + spin_unlock_irqrestore(&host_set->lock, flags); atapi_request_sense(ap, dev, cmd); @@ -2865,6 +3010,8 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) } } + spin_lock_irqsave(&host_set->lock, flags); + /* hack alert! We cannot use the supplied completion * function from inside the ->eh_strategy_handler() thread. * libata is the only user of ->eh_strategy_handler() in @@ -2880,7 +3027,7 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) host_stat = ap->ops->bmdma_status(ap); /* before we do anything else, clear DMA-Start bit */ - ap->ops->bmdma_stop(ap); + ap->ops->bmdma_stop(qc); /* fall through */ @@ -2898,6 +3045,9 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) ata_qc_complete(qc, drv_stat); break; } + + spin_unlock_irqrestore(&host_set->lock, flags); + out: DPRINTK("EXIT\n"); } @@ -3071,9 +3221,14 @@ void ata_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) if (likely(qc->flags & ATA_QCFLAG_DMAMAP)) ata_sg_clean(qc); + /* atapi: mark qc as inactive to prevent the interrupt handler + * from completing the command twice later, before the error handler + * is called. (when rc != 0 and atapi request sense is needed) + */ + qc->flags &= ~ATA_QCFLAG_ACTIVE; + /* call completion callback */ rc = qc->complete_fn(qc, drv_stat); - qc->flags &= ~ATA_QCFLAG_ACTIVE; /* if callback indicates not to complete command (non-zero), * return immediately @@ -3203,11 +3358,13 @@ int ata_qc_issue_prot(struct ata_queued_cmd *qc) break; case ATA_PROT_ATAPI_NODATA: + ap->flags |= ATA_FLAG_NOINTR; ata_tf_to_host_nolock(ap, &qc->tf); queue_work(ata_wq, &ap->packet_task); break; case ATA_PROT_ATAPI_DMA: + ap->flags |= ATA_FLAG_NOINTR; ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ ap->ops->bmdma_setup(qc); /* set up bmdma */ queue_work(ata_wq, &ap->packet_task); @@ -3252,7 +3409,7 @@ static void ata_bmdma_setup_mmio (struct ata_queued_cmd *qc) } /** - * ata_bmdma_start - Start a PCI IDE BMDMA transaction + * ata_bmdma_start_mmio - Start a PCI IDE BMDMA transaction * @qc: Info associated with this ATA transaction. * * LOCKING: @@ -3423,7 +3580,7 @@ u8 ata_bmdma_status(struct ata_port *ap) /** * ata_bmdma_stop - Stop PCI IDE BMDMA transfer - * @ap: Port associated with this ATA transaction. + * @qc: Command we are ending DMA for * * Clears the ATA_DMA_START flag in the dma control register * @@ -3433,8 +3590,9 @@ u8 ata_bmdma_status(struct ata_port *ap) * spin_lock_irqsave(host_set lock) */ -void ata_bmdma_stop(struct ata_port *ap) +void ata_bmdma_stop(struct ata_queued_cmd *qc) { + struct ata_port *ap = qc->ap; if (ap->flags & ATA_FLAG_MMIO) { void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; @@ -3486,7 +3644,7 @@ inline unsigned int ata_host_intr (struct ata_port *ap, goto idle_irq; /* before we do anything else, clear DMA-Start bit */ - ap->ops->bmdma_stop(ap); + ap->ops->bmdma_stop(qc); /* fall through */ @@ -3561,7 +3719,8 @@ irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) struct ata_port *ap; ap = host_set->ports[i]; - if (ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) { + if (ap && + !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); @@ -3613,19 +3772,27 @@ static void atapi_packet_task(void *_data) /* send SCSI cdb */ DPRINTK("send cdb\n"); assert(ap->cdb_len >= 12); - ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1); - /* if we are DMA'ing, irq handler takes over from here */ - if (qc->tf.protocol == ATA_PROT_ATAPI_DMA) - ap->ops->bmdma_start(qc); /* initiate bmdma */ + if (qc->tf.protocol == ATA_PROT_ATAPI_DMA || + qc->tf.protocol == ATA_PROT_ATAPI_NODATA) { + unsigned long flags; - /* non-data commands are also handled via irq */ - else if (qc->tf.protocol == ATA_PROT_ATAPI_NODATA) { - /* do nothing */ - } + /* Once we're done issuing command and kicking bmdma, + * irq handler takes over. To not lose irq, we need + * to clear NOINTR flag before sending cdb, but + * interrupt handler shouldn't be invoked before we're + * finished. Hence, the following locking. + */ + spin_lock_irqsave(&ap->host_set->lock, flags); + ap->flags &= ~ATA_FLAG_NOINTR; + ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1); + if (qc->tf.protocol == ATA_PROT_ATAPI_DMA) + ap->ops->bmdma_start(qc); /* initiate bmdma */ + spin_unlock_irqrestore(&ap->host_set->lock, flags); + } else { + ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1); - /* PIO commands are handled by polling */ - else { + /* PIO commands are handled by polling */ ap->pio_task_state = PIO_ST; queue_work(ata_wq, &ap->pio_task); } @@ -3633,7 +3800,7 @@ static void atapi_packet_task(void *_data) return; err_out: - ata_qc_complete(qc, ATA_ERR); + ata_poll_qc_complete(qc, ATA_ERR); } |