Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (60 commits)
  [SCSI] libsas: make ATA functions selectable by a config option
  [SCSI] bsg: unexport sg v3 helper functions
  [SCSI] bsg: fix bsg_unregister_queue
  [SCSI] bsg: make class backlinks
  [SCSI] 3w-9xxx: add support for 9690SA
  [SCSI] bsg: fix bsg_register_queue error path
  [SCSI] ESP: Increase ESP_BUS_TIMEOUT to 275.
  [SCSI] libsas: fix scr_read/write users and update the libata documentation
  [SCSI] mpt fusion: update Kconfig help
  [SCSI] scsi_transport_sas: add destructor for bsg
  [SCSI] iscsi_tcp: buggered kmalloc()
  [SCSI] qla2xxx: Update version number to 8.02.00-k2.
  [SCSI] qla2xxx: Add ISP25XX support.
  [SCSI] qla2xxx: Use pci_try_set_mwi().
  [SCSI] qla2xxx: Use PCI-X/PCI-Express read control interfaces.
  [SCSI] qla2xxx: Re-factor isp_operations to static structures.
  [SCSI] qla2xxx: Validate mid-layer 'underflow' during check-condition handling.
  [SCSI] qla2xxx: Correct setting of 'current' and 'supported' speeds during FDMI registration.
  [SCSI] qla2xxx: Generalize iIDMA support.
  [SCSI] qla2xxx: Generalize FW-Interface-2 support.
  ...

8 files changed, 1024 insertions, 511 deletions

diff --git a/drivers/scsi/libsas/Kconfig b/drivers/scsi/libsas/Kconfig
index aafdc92f831..3a3c1ac9c6c 100644
--- a/drivers/scsi/libsas/Kconfig
+++ b/drivers/scsi/libsas/Kconfig
@@ -30,6 +30,13 @@ config SCSI_SAS_LIBSAS
 	  This provides transport specific helpers for SAS drivers which
 	  use the domain device construct (like the aic94xxx).
 
+config SCSI_SAS_ATA
+	bool "ATA support for libsas (requires libata)"
+	depends on SCSI_SAS_LIBSAS && ATA
+	help
+		Builds in ATA support into libsas.  Will necessitate
+		the loading of libata along with libsas.
+
 config SCSI_SAS_LIBSAS_DEBUG
 	bool "Compile the SAS Domain Transport Attributes in debug mode"
 	default y
diff --git a/drivers/scsi/libsas/Makefile b/drivers/scsi/libsas/Makefile
index 44d972a3b4b..fd387b91856 100644
--- a/drivers/scsi/libsas/Makefile
+++ b/drivers/scsi/libsas/Makefile
@@ -34,3 +34,4 @@ libsas-y +=  sas_init.o     \
 		sas_discover.o \
 		sas_expander.o \
 		sas_scsi_host.o
+libsas-$(CONFIG_SCSI_SAS_ATA) +=	sas_ata.o
diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
new file mode 100644
index 00000000000..ced2de32c51
--- /dev/null
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -0,0 +1,817 @@
+/*
+ * Support for SATA devices on Serial Attached SCSI (SAS) controllers
+ *
+ * Copyright (C) 2006 IBM Corporation
+ *
+ * Written by: Darrick J. Wong <djwong@us.ibm.com>, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include <linux/scatterlist.h>
+
+#include <scsi/sas_ata.h>
+#include "sas_internal.h"
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+#include "../scsi_sas_internal.h"
+#include "../scsi_transport_api.h"
+#include <scsi/scsi_eh.h>
+
+static enum ata_completion_errors sas_to_ata_err(struct task_status_struct *ts)
+{
+	/* Cheesy attempt to translate SAS errors into ATA.  Hah! */
+
+	/* transport error */
+	if (ts->resp == SAS_TASK_UNDELIVERED)
+		return AC_ERR_ATA_BUS;
+
+	/* ts->resp == SAS_TASK_COMPLETE */
+	/* task delivered, what happened afterwards? */
+	switch (ts->stat) {
+		case SAS_DEV_NO_RESPONSE:
+			return AC_ERR_TIMEOUT;
+
+		case SAS_INTERRUPTED:
+		case SAS_PHY_DOWN:
+		case SAS_NAK_R_ERR:
+			return AC_ERR_ATA_BUS;
+
+
+		case SAS_DATA_UNDERRUN:
+			/*
+			 * Some programs that use the taskfile interface
+			 * (smartctl in particular) can cause underrun
+			 * problems.  Ignore these errors, perhaps at our
+			 * peril.
+			 */
+			return 0;
+
+		case SAS_DATA_OVERRUN:
+		case SAS_QUEUE_FULL:
+		case SAS_DEVICE_UNKNOWN:
+		case SAS_SG_ERR:
+			return AC_ERR_INVALID;
+
+		case SAM_CHECK_COND:
+		case SAS_OPEN_TO:
+		case SAS_OPEN_REJECT:
+			SAS_DPRINTK("%s: Saw error %d.  What to do?\n",
+				    __FUNCTION__, ts->stat);
+			return AC_ERR_OTHER;
+
+		case SAS_ABORTED_TASK:
+			return AC_ERR_DEV;
+
+		case SAS_PROTO_RESPONSE:
+			/* This means the ending_fis has the error
+			 * value; return 0 here to collect it */
+			return 0;
+		default:
+			return 0;
+	}
+}
+
+static void sas_ata_task_done(struct sas_task *task)
+{
+	struct ata_queued_cmd *qc = task->uldd_task;
+	struct domain_device *dev;
+	struct task_status_struct *stat = &task->task_status;
+	struct ata_task_resp *resp = (struct ata_task_resp *)stat->buf;
+	struct sas_ha_struct *sas_ha;
+	enum ata_completion_errors ac;
+	unsigned long flags;
+
+	if (!qc)
+		goto qc_already_gone;
+
+	dev = qc->ap->private_data;
+	sas_ha = dev->port->ha;
+
+	spin_lock_irqsave(dev->sata_dev.ap->lock, flags);
+	if (stat->stat == SAS_PROTO_RESPONSE || stat->stat == SAM_GOOD) {
+		ata_tf_from_fis(resp->ending_fis, &dev->sata_dev.tf);
+		qc->err_mask |= ac_err_mask(dev->sata_dev.tf.command);
+		dev->sata_dev.sstatus = resp->sstatus;
+		dev->sata_dev.serror = resp->serror;
+		dev->sata_dev.scontrol = resp->scontrol;
+	} else if (stat->stat != SAM_STAT_GOOD) {
+		ac = sas_to_ata_err(stat);
+		if (ac) {
+			SAS_DPRINTK("%s: SAS error %x\n", __FUNCTION__,
+				    stat->stat);
+			/* We saw a SAS error. Send a vague error. */
+			qc->err_mask = ac;
+			dev->sata_dev.tf.feature = 0x04; /* status err */
+			dev->sata_dev.tf.command = ATA_ERR;
+		}
+	}
+
+	qc->lldd_task = NULL;
+	if (qc->scsicmd)
+		ASSIGN_SAS_TASK(qc->scsicmd, NULL);
+	ata_qc_complete(qc);
+	spin_unlock_irqrestore(dev->sata_dev.ap->lock, flags);
+
+	/*
+	 * If the sas_task has an ata qc, a scsi_cmnd and the aborted
+	 * flag is set, then we must have come in via the libsas EH
+	 * functions.  When we exit this function, we need to put the
+	 * scsi_cmnd on the list of finished errors.  The ata_qc_complete
+	 * call cleans up the libata side of things but we're protected
+	 * from the scsi_cmnd going away because the scsi_cmnd is owned
+	 * by the EH, making libata's call to scsi_done a NOP.
+	 */
+	spin_lock_irqsave(&task->task_state_lock, flags);
+	if (qc->scsicmd && task->task_state_flags & SAS_TASK_STATE_ABORTED)
+		scsi_eh_finish_cmd(qc->scsicmd, &sas_ha->eh_done_q);
+	spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+qc_already_gone:
+	list_del_init(&task->list);
+	sas_free_task(task);
+}
+
+static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc)
+{
+	int res;
+	struct sas_task *task;
+	struct domain_device *dev = qc->ap->private_data;
+	struct sas_ha_struct *sas_ha = dev->port->ha;
+	struct Scsi_Host *host = sas_ha->core.shost;
+	struct sas_internal *i = to_sas_internal(host->transportt);
+	struct scatterlist *sg;
+	unsigned int num = 0;
+	unsigned int xfer = 0;
+
+	task = sas_alloc_task(GFP_ATOMIC);
+	if (!task)
+		return AC_ERR_SYSTEM;
+	task->dev = dev;
+	task->task_proto = SAS_PROTOCOL_STP;
+	task->task_done = sas_ata_task_done;
+
+	if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
+	    qc->tf.command == ATA_CMD_FPDMA_READ) {
+		/* Need to zero out the tag libata assigned us */
+		qc->tf.nsect = 0;
+	}
+
+	ata_tf_to_fis(&qc->tf, 1, 0, (u8*)&task->ata_task.fis);
+	task->uldd_task = qc;
+	if (is_atapi_taskfile(&qc->tf)) {
+		memcpy(task->ata_task.atapi_packet, qc->cdb, qc->dev->cdb_len);
+		task->total_xfer_len = qc->nbytes + qc->pad_len;
+		task->num_scatter = qc->pad_len ? qc->n_elem + 1 : qc->n_elem;
+	} else {
+		ata_for_each_sg(sg, qc) {
+			num++;
+			xfer += sg->length;
+		}
+
+		task->total_xfer_len = xfer;
+		task->num_scatter = num;
+	}
+
+	task->data_dir = qc->dma_dir;
+	task->scatter = qc->__sg;
+	task->ata_task.retry_count = 1;
+	task->task_state_flags = SAS_TASK_STATE_PENDING;
+	qc->lldd_task = task;
+
+	switch (qc->tf.protocol) {
+	case ATA_PROT_NCQ:
+		task->ata_task.use_ncq = 1;
+		/* fall through */
+	case ATA_PROT_ATAPI_DMA:
+	case ATA_PROT_DMA:
+		task->ata_task.dma_xfer = 1;
+		break;
+	}
+
+	if (qc->scsicmd)
+		ASSIGN_SAS_TASK(qc->scsicmd, task);
+
+	if (sas_ha->lldd_max_execute_num < 2)
+		res = i->dft->lldd_execute_task(task, 1, GFP_ATOMIC);
+	else
+		res = sas_queue_up(task);
+
+	/* Examine */
+	if (res) {
+		SAS_DPRINTK("lldd_execute_task returned: %d\n", res);
+
+		if (qc->scsicmd)
+			ASSIGN_SAS_TASK(qc->scsicmd, NULL);
+		sas_free_task(task);
+		return AC_ERR_SYSTEM;
+	}
+
+	return 0;
+}
+
+static u8 sas_ata_check_status(struct ata_port *ap)
+{
+	struct domain_device *dev = ap->private_data;
+	return dev->sata_dev.tf.command;
+}
+
+static void sas_ata_phy_reset(struct ata_port *ap)
+{
+	struct domain_device *dev = ap->private_data;
+	struct sas_internal *i =
+		to_sas_internal(dev->port->ha->core.shost->transportt);
+	int res = 0;
+
+	if (i->dft->lldd_I_T_nexus_reset)
+		res = i->dft->lldd_I_T_nexus_reset(dev);
+
+	if (res)
+		SAS_DPRINTK("%s: Unable to reset I T nexus?\n", __FUNCTION__);
+
+	switch (dev->sata_dev.command_set) {
+		case ATA_COMMAND_SET:
+			SAS_DPRINTK("%s: Found ATA device.\n", __FUNCTION__);
+			ap->device[0].class = ATA_DEV_ATA;
+			break;
+		case ATAPI_COMMAND_SET:
+			SAS_DPRINTK("%s: Found ATAPI device.\n", __FUNCTION__);
+			ap->device[0].class = ATA_DEV_ATAPI;
+			break;
+		default:
+			SAS_DPRINTK("%s: Unknown SATA command set: %d.\n",
+				    __FUNCTION__,
+				    dev->sata_dev.command_set);
+			ap->device[0].class = ATA_DEV_UNKNOWN;
+			break;
+	}
+
+	ap->cbl = ATA_CBL_SATA;
+}
+
+static void sas_ata_post_internal(struct ata_queued_cmd *qc)
+{
+	if (qc->flags & ATA_QCFLAG_FAILED)
+		qc->err_mask |= AC_ERR_OTHER;
+
+	if (qc->err_mask) {
+		/*
+		 * Find the sas_task and kill it.  By this point,
+		 * libata has decided to kill the qc, so we needn't
+		 * bother with sas_ata_task_done.  But we still
+		 * ought to abort the task.
+		 */
+		struct sas_task *task = qc->lldd_task;
+		unsigned long flags;
+
+		qc->lldd_task = NULL;
+		if (task) {
+			/* Should this be a AT(API) device reset? */
+			spin_lock_irqsave(&task->task_state_lock, flags);
+			task->task_state_flags |= SAS_TASK_NEED_DEV_RESET;
+			spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+			task->uldd_task = NULL;
+			__sas_task_abort(task);
+		}
+	}
+}
+
+static void sas_ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
+{
+	struct domain_device *dev = ap->private_data;
+	memcpy(tf, &dev->sata_dev.tf, sizeof (*tf));
+}
+
+static int sas_ata_scr_write(struct ata_port *ap, unsigned int sc_reg_in,
+			      u32 val)
+{
+	struct domain_device *dev = ap->private_data;
+
+	SAS_DPRINTK("STUB %s\n", __FUNCTION__);
+	switch (sc_reg_in) {
+		case SCR_STATUS:
+			dev->sata_dev.sstatus = val;
+			break;
+		case SCR_CONTROL:
+			dev->sata_dev.scontrol = val;
+			break;
+		case SCR_ERROR:
+			dev->sata_dev.serror = val;
+			break;
+		case SCR_ACTIVE:
+			dev->sata_dev.ap->sactive = val;
+			break;
+		default:
+			return -EINVAL;
+	}
+	return 0;
+}
+
+static int sas_ata_scr_read(struct ata_port *ap, unsigned int sc_reg_in,
+			    u32 *val)
+{
+	struct domain_device *dev = ap->private_data;
+
+	SAS_DPRINTK("STUB %s\n", __FUNCTION__);
+	switch (sc_reg_in) {
+		case SCR_STATUS:
+			*val = dev->sata_dev.sstatus;
+			return 0;
+		case SCR_CONTROL:
+			*val = dev->sata_dev.scontrol;
+			return 0;
+		case SCR_ERROR:
+			*val = dev->sata_dev.serror;
+			return 0;
+		case SCR_ACTIVE:
+			*val = dev->sata_dev.ap->sactive;
+			return 0;
+		default:
+			return -EINVAL;
+	}
+}
+
+static struct ata_port_operations sas_sata_ops = {
+	.port_disable		= ata_port_disable,
+	.check_status		= sas_ata_check_status,
+	.check_altstatus	= sas_ata_check_status,
+	.dev_select		= ata_noop_dev_select,
+	.phy_reset		= sas_ata_phy_reset,
+	.post_internal_cmd	= sas_ata_post_internal,
+	.tf_read		= sas_ata_tf_read,
+	.qc_prep		= ata_noop_qc_prep,
+	.qc_issue		= sas_ata_qc_issue,
+	.port_start		= ata_sas_port_start,
+	.port_stop		= ata_sas_port_stop,
+	.scr_read		= sas_ata_scr_read,
+	.scr_write		= sas_ata_scr_write
+};
+
+static struct ata_port_info sata_port_info = {
+	.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SATA_RESET |
+		ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | ATA_FLAG_NCQ,
+	.pio_mask = 0x1f, /* PIO0-4 */
+	.mwdma_mask = 0x07, /* MWDMA0-2 */
+	.udma_mask = ATA_UDMA6,
+	.port_ops = &sas_sata_ops
+};
+
+int sas_ata_init_host_and_port(struct domain_device *found_dev,
+			       struct scsi_target *starget)
+{
+	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
+	struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
+	struct ata_port *ap;
+
+	ata_host_init(&found_dev->sata_dev.ata_host,
+		      &ha->pcidev->dev,
+		      sata_port_info.flags,
+		      &sas_sata_ops);
+	ap = ata_sas_port_alloc(&found_dev->sata_dev.ata_host,
+				&sata_port_info,
+				shost);
+	if (!ap) {
+		SAS_DPRINTK("ata_sas_port_alloc failed.\n");
+		return -ENODEV;
+	}
+
+	ap->private_data = found_dev;
+	ap->cbl = ATA_CBL_SATA;
+	ap->scsi_host = shost;
+	found_dev->sata_dev.ap = ap;
+
+	return 0;
+}
+
+void sas_ata_task_abort(struct sas_task *task)
+{
+	struct ata_queued_cmd *qc = task->uldd_task;
+	struct completion *waiting;
+
+	/* Bounce SCSI-initiated commands to the SCSI EH */
+	if (qc->scsicmd) {
+		scsi_req_abort_cmd(qc->scsicmd);
+		scsi_schedule_eh(qc->scsicmd->device->host);
+		return;
+	}
+
+	/* Internal command, fake a timeout and complete. */
+	qc->flags &= ~ATA_QCFLAG_ACTIVE;
+	qc->flags |= ATA_QCFLAG_FAILED;
+	qc->err_mask |= AC_ERR_TIMEOUT;
+	waiting = qc->private_data;
+	complete(waiting);
+}
+
+static void sas_task_timedout(unsigned long _task)
+{
+	struct sas_task *task = (void *) _task;
+	unsigned long flags;
+
+	spin_lock_irqsave(&task->task_state_lock, flags);
+	if (!(task->task_state_flags & SAS_TASK_STATE_DONE))
+		task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+	spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+	complete(&task->completion);
+}
+
+static void sas_disc_task_done(struct sas_task *task)
+{
+	if (!del_timer(&task->timer))
+		return;
+	complete(&task->completion);
+}
+
+#define SAS_DEV_TIMEOUT 10
+
+/**
+ * sas_execute_task -- Basic task processing for discovery
+ * @task: the task to be executed
+ * @buffer: pointer to buffer to do I/O
+ * @size: size of @buffer
+ * @pci_dma_dir: PCI_DMA_...
+ */
+static int sas_execute_task(struct sas_task *task, void *buffer, int size,
+			    int pci_dma_dir)
+{
+	int res = 0;
+	struct scatterlist *scatter = NULL;
+	struct task_status_struct *ts = &task->task_status;
+	int num_scatter = 0;
+	int retries = 0;
+	struct sas_internal *i =
+		to_sas_internal(task->dev->port->ha->core.shost->transportt);
+
+	if (pci_dma_dir != PCI_DMA_NONE) {
+		scatter = kzalloc(sizeof(*scatter), GFP_KERNEL);
+		if (!scatter)
+			goto out;
+
+		sg_init_one(scatter, buffer, size);
+		num_scatter = 1;
+	}
+
+	task->task_proto = task->dev->tproto;
+	task->scatter = scatter;
+	task->num_scatter = num_scatter;
+	task->total_xfer_len = size;
+	task->data_dir = pci_dma_dir;
+	task->task_done = sas_disc_task_done;
+	if (pci_dma_dir != PCI_DMA_NONE &&
+	    sas_protocol_ata(task->task_proto)) {
+		task->num_scatter = pci_map_sg(task->dev->port->ha->pcidev,
+					       task->scatter,
+					       task->num_scatter,
+					       task->data_dir);
+	}
+
+	for (retries = 0; retries < 5; retries++) {
+		task->task_state_flags = SAS_TASK_STATE_PENDING;
+		init_completion(&task->completion);
+
+		task->timer.data = (unsigned long) task;
+		task->timer.function = sas_task_timedout;
+		task->timer.expires = jiffies + SAS_DEV_TIMEOUT*HZ;
+		add_timer(&task->timer);
+
+		res = i->dft->lldd_execute_task(task, 1, GFP_KERNEL);
+		if (res) {
+			del_timer(&task->timer);
+			SAS_DPRINTK("executing SAS discovery task failed:%d\n",
+				    res);
+			goto ex_err;
+		}
+		wait_for_completion(&task->completion);
+		res = -ETASK;
+		if (task->task_state_flags & SAS_TASK_STATE_ABORTED) {
+			int res2;
+			SAS_DPRINTK("task aborted, flags:0x%x\n",
+				    task->task_state_flags);
+			res2 = i->dft->lldd_abort_task(task);
+			SAS_DPRINTK("came back from abort task\n");
+			if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
+				if (res2 == TMF_RESP_FUNC_COMPLETE)
+					continue; /* Retry the task */
+				else
+					goto ex_err;
+			}
+		}
+		if (task->task_status.stat == SAM_BUSY ||
+			   task->task_status.stat == SAM_TASK_SET_FULL ||
+			   task->task_status.stat == SAS_QUEUE_FULL) {
+			SAS_DPRINTK("task: q busy, sleeping...\n");
+			schedule_timeout_interruptible(HZ);
+		} else if (task->task_status.stat == SAM_CHECK_COND) {
+			struct scsi_sense_hdr shdr;
+
+			if (!scsi_normalize_sense(ts->buf, ts->buf_valid_size,
+						  &shdr)) {
+				SAS_DPRINTK("couldn't normalize sense\n");
+				continue;
+			}
+			if ((shdr.sense_key == 6 && shdr.asc == 0x29) ||
+			    (shdr.sense_key == 2 && shdr.asc == 4 &&
+			     shdr.ascq == 1)) {
+				SAS_DPRINTK("device %016llx LUN: %016llx "
+					    "powering up or not ready yet, "
+					    "sleeping...\n",
+					    SAS_ADDR(task->dev->sas_addr),
+					    SAS_ADDR(task->ssp_task.LUN));
+
+				schedule_timeout_interruptible(5*HZ);
+			} else if (shdr.sense_key == 1) {
+				res = 0;
+				break;
+			} else if (shdr.sense_key == 5) {
+				break;
+			} else {
+				SAS_DPRINTK("dev %016llx LUN: %016llx "
+					    "sense key:0x%x ASC:0x%x ASCQ:0x%x"
+					    "\n",
+					    SAS_ADDR(task->dev->sas_addr),
+					    SAS_ADDR(task->ssp_task.LUN),
+					    shdr.sense_key,
+					    shdr.asc, shdr.ascq);
+			}
+		} else if (task->task_status.resp != SAS_TASK_COMPLETE ||
+			   task->task_status.stat != SAM_GOOD) {
+			SAS_DPRINTK("task finished with resp:0x%x, "
+				    "stat:0x%x\n",
+				    task->task_status.resp,
+				    task->task_status.stat);
+			goto ex_err;
+		} else {
+			res = 0;
+			break;
+		}
+	}
+ex_err:
+	if (pci_dma_dir != PCI_DMA_NONE) {
+		if (sas_protocol_ata(task->task_proto))
+			pci_unmap_sg(task->dev->port->ha->pcidev,
+				     task->scatter, task->num_scatter,
+				     task->data_dir);
+		kfree(scatter);
+	}
+out:
+	return res;
+}
+
+/* ---------- SATA ---------- */
+
+static void sas_get_ata_command_set(struct domain_device *dev)
+{
+	struct dev_to_host_fis *fis =
+		(struct dev_to_host_fis *) dev->frame_rcvd;
+
+	if ((fis->sector_count == 1 && /* ATA */
+	     fis->lbal         == 1 &&
+	     fis->lbam         == 0 &&
+	     fis->lbah         == 0 &&
+	     fis->device       == 0)
+	    ||
+	    (fis->sector_count == 0 && /* CE-ATA (mATA) */
+	     fis->lbal         == 0 &&
+	     fis->lbam         == 0xCE &&
+	     fis->lbah         == 0xAA &&
+	     (fis->device & ~0x10) == 0))
+
+		dev->sata_dev.command_set = ATA_COMMAND_SET;
+
+	else if ((fis->interrupt_reason == 1 &&	/* ATAPI */
+		  fis->lbal             == 1 &&
+		  fis->byte_count_low   == 0x14 &&
+		  fis->byte_count_high  == 0xEB &&
+		  (fis->device & ~0x10) == 0))
+
+		dev->sata_dev.command_set = ATAPI_COMMAND_SET;
+
+	else if ((fis->sector_count == 1 && /* SEMB */
+		  fis->lbal         == 1 &&
+		  fis->lbam         == 0x3C &&
+		  fis->lbah         == 0xC3 &&
+		  fis->device       == 0)
+		||
+		 (fis->interrupt_reason == 1 &&	/* SATA PM */
+		  fis->lbal             == 1 &&
+		  fis->byte_count_low   == 0x69 &&
+		  fis->byte_count_high  == 0x96 &&
+		  (fis->device & ~0x10) == 0))
+
+		/* Treat it as a superset? */
+		dev->sata_dev.command_set = ATAPI_COMMAND_SET;
+}
+
+/**
+ * sas_issue_ata_cmd -- Basic SATA command processing for discovery
+ * @dev: the device to send the command to
+ * @command: the command register
+ * @features: the features register
+ * @buffer: pointer to buffer to do I/O
+ * @size: size of @buffer
+ * @pci_dma_dir: PCI_DMA_...
+ */
+static int sas_issue_ata_cmd(struct domain_device *dev, u8 command,
+			     u8 features, void *buffer, int size,
+			     int pci_dma_dir)
+{
+	int res = 0;
+	struct sas_task *task;
+	struct dev_to_host_fis *d2h_fis = (struct dev_to_host_fis *)
+		&dev->frame_rcvd[0];
+
+	res = -ENOMEM;
+	task = sas_alloc_task(GFP_KERNEL);
+	if (!task)
+		goto out;
+
+	task->dev = dev;
+
+	task->ata_task.fis.fis_type = 0x27;
+	task->ata_task.fis.command = command;
+	task->ata_task.fis.features = features;
+	task->ata_task.fis.device = d2h_fis->device;
+	task->ata_task.retry_count = 1;
+
+	res = sas_execute_task(task, buffer, size, pci_dma_dir);
+
+	sas_free_task(task);
+out:
+	return res;
+}
+
+static void sas_sata_propagate_sas_addr(struct domain_device *dev)
+{
+	unsigned long flags;
+	struct asd_sas_port *port = dev->port;
+	struct asd_sas_phy  *phy;
+
+	BUG_ON(dev->parent);
+
+	memcpy(port->attached_sas_addr, dev->sas_addr, SAS_ADDR_SIZE);
+	spin_lock_irqsave(&port->phy_list_lock, flags);
+	list_for_each_entry(phy, &port->phy_list, port_phy_el)
+		memcpy(phy->attached_sas_addr, dev->sas_addr, SAS_ADDR_SIZE);
+	spin_unlock_irqrestore(&port->phy_list_lock, flags);
+}
+
+#define ATA_IDENTIFY_DEV         0xEC
+#define ATA_IDENTIFY_PACKET_DEV  0xA1
+#define ATA_SET_FEATURES         0xEF
+#define ATA_FEATURE_PUP_STBY_SPIN_UP 0x07
+
+/**
+ * sas_discover_sata_dev -- discover a STP/SATA device (SATA_DEV)
+ * @dev: STP/SATA device of interest (ATA/ATAPI)
+ *
+ * The LLDD has already been notified of this device, so that we can
+ * send FISes to it.  Here we try to get IDENTIFY DEVICE or IDENTIFY
+ * PACKET DEVICE, if ATAPI device, so that the LLDD can fine-tune its
+ * performance for this device.
+ */
+static int sas_discover_sata_dev(struct domain_device *dev)
+{
+	int     res;
+	__le16  *identify_x;
+	u8      command;
+
+	identify_x = kzalloc(512, GFP_KERNEL);
+	if (!identify_x)
+		return -ENOMEM;
+
+	if (dev->sata_dev.command_set == ATA_COMMAND_SET) {
+		dev->sata_dev.identify_device = identify_x;
+		command = ATA_IDENTIFY_DEV;
+	} else {
+		dev->sata_dev.identify_packet_device = identify_x;
+		command = ATA_IDENTIFY_PACKET_DEV;
+	}
+
+	res = sas_issue_ata_cmd(dev, command, 0, identify_x, 512,
+				PCI_DMA_FROMDEVICE);
+	if (res)
+		goto out_err;
+
+	/* lives on the media? */
+	if (le16_to_cpu(identify_x[0]) & 4) {
+		/* incomplete response */
+		SAS_DPRINTK("sending SET FEATURE/PUP_STBY_SPIN_UP to "
+			    "dev %llx\n", SAS_ADDR(dev->sas_addr));
+		if (!le16_to_cpu(identify_x[83] & (1<<6)))
+			goto cont1;
+		res = sas_issue_ata_cmd(dev, ATA_SET_FEATURES,
+					ATA_FEATURE_PUP_STBY_SPIN_UP,
+					NULL, 0, PCI_DMA_NONE);
+		if (res)
+			goto cont1;
+
+		schedule_timeout_interruptible(5*HZ); /* More time? */
+		res = sas_issue_ata_cmd(dev, command, 0, identify_x, 512,
+					PCI_DMA_FROMDEVICE);
+		if (res)
+			goto out_err;
+	}
+cont1:
+	/* Get WWN */
+	if (dev->port->oob_mode != SATA_OOB_MODE) {
+		memcpy(dev->sas_addr, dev->sata_dev.rps_resp.rps.stp_sas_addr,
+		       SAS_ADDR_SIZE);
+	} else if (dev->sata_dev.command_set == ATA_COMMAND_SET &&
+		   (le16_to_cpu(dev->sata_dev.identify_device[108]) & 0xF000)
+		   == 0x5000) {
+		int i;
+
+		for (i = 0; i < 4; i++) {
+			dev->sas_addr[2*i] =
+	     (le16_to_cpu(dev->sata_dev.identify_device[108+i]) & 0xFF00) >> 8;
+			dev->sas_addr[2*i+1] =
+	      le16_to_cpu(dev->sata_dev.identify_device[108+i]) & 0x00FF;
+		}
+	}
+	sas_hash_addr(dev->hashed_sas_addr, dev->sas_addr);
+	if (!dev->parent)
+		sas_sata_propagate_sas_addr(dev);
+
+	/* XXX Hint: register this SATA device with SATL.
+	   When this returns, dev->sata_dev->lu is alive and
+	   present.
+	sas_satl_register_dev(dev);
+	*/
+
+	sas_fill_in_rphy(dev, dev->rphy);
+
+	return 0;
+out_err:
+	dev->sata_dev.identify_packet_device = NULL;
+	dev->sata_dev.identify_device = NULL;
+	kfree(identify_x);
+	return res;
+}
+
+static int sas_discover_sata_pm(struct domain_device *dev)
+{
+	return -ENODEV;
+}
+
+/**
+ * sas_discover_sata -- discover an STP/SATA domain device
+ * @dev: pointer to struct domain_device of interest
+ *
+ * First we notify the LLDD of this device, so we can send frames to
+ * it.  Then depending on the type of device we call the appropriate
+ * discover functions.  Once device discover is done, we notify the
+ * LLDD so that it can fine-tune its parameters for the device, by
+ * removing it and then adding it.  That is, the second time around,
+ * the driver would have certain fields, that it is looking at, set.
+ * Finally we initialize the kobj so that the device can be added to
+ * the system at registration time.  Devices directly attached to a HA
+ * port, have no parents.  All other devices do, and should have their
+ * "parent" pointer set appropriately before calling this function.
+ */
+int sas_discover_sata(struct domain_device *dev)
+{
+	int res;
+
+	sas_get_ata_command_set(dev);
+
+	res = sas_notify_lldd_dev_found(dev);
+	if (res)
+		return res;
+
+	switch (dev->dev_type) {
+	case SATA_DEV:
+		res = sas_discover_sata_dev(dev);
+		break;
+	case SATA_PM:
+		res = sas_discover_sata_pm(dev);
+		break;
+	default:
+		break;
+	}
+	sas_notify_lldd_dev_gone(dev);
+	if (!res) {
+		sas_notify_lldd_dev_found(dev);
+		res = sas_rphy_add(dev->rphy);
+	}
+
+	return res;
+}
diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c
index a65598b1e53..6ac9f61d006 100644
--- a/drivers/scsi/libsas/sas_discover.c
+++ b/drivers/scsi/libsas/sas_discover.c
@@ -55,149 +55,6 @@ void sas_init_dev(struct domain_device *dev)
         }
 }
 
-static void sas_task_timedout(unsigned long _task)
-{
-	struct sas_task *task = (void *) _task;
-	unsigned long flags;
-
-	spin_lock_irqsave(&task->task_state_lock, flags);
-	if (!(task->task_state_flags & SAS_TASK_STATE_DONE))
-		task->task_state_flags |= SAS_TASK_STATE_ABORTED;
-	spin_unlock_irqrestore(&task->task_state_lock, flags);
-
-	complete(&task->completion);
-}
-
-static void sas_disc_task_done(struct sas_task *task)
-{
-	if (!del_timer(&task->timer))
-		return;
-	complete(&task->completion);
-}
-
-#define SAS_DEV_TIMEOUT 10
-
-/**
- * sas_execute_task -- Basic task processing for discovery
- * @task: the task to be executed
- * @buffer: pointer to buffer to do I/O
- * @size: size of @buffer
- * @pci_dma_dir: PCI_DMA_...
- */
-static int sas_execute_task(struct sas_task *task, void *buffer, int size,
-			    int pci_dma_dir)
-{
-	int res = 0;
-	struct scatterlist *scatter = NULL;
-	struct task_status_struct *ts = &task->task_status;
-	int num_scatter = 0;
-	int retries = 0;
-	struct sas_internal *i =
-		to_sas_internal(task->dev->port->ha->core.shost->transportt);
-
-	if (pci_dma_dir != PCI_DMA_NONE) {
-		scatter = kzalloc(sizeof(*scatter), GFP_KERNEL);
-		if (!scatter)
-			goto out;
-
-		sg_init_one(scatter, buffer, size);
-		num_scatter = 1;
-	}
-
-	task->task_proto = task->dev->tproto;
-	task->scatter = scatter;
-	task->num_scatter = num_scatter;
-	task->total_xfer_len = size;
-	task->data_dir = pci_dma_dir;
-	task->task_done = sas_disc_task_done;
-
-	for (retries = 0; retries < 5; retries++) {
-		task->task_state_flags = SAS_TASK_STATE_PENDING;
-		init_completion(&task->completion);
-
-		task->timer.data = (unsigned long) task;
-		task->timer.function = sas_task_timedout;
-		task->timer.expires = jiffies + SAS_DEV_TIMEOUT*HZ;
-		add_timer(&task->timer);
-
-		res = i->dft->lldd_execute_task(task, 1, GFP_KERNEL);
-		if (res) {
-			del_timer(&task->timer);
-			SAS_DPRINTK("executing SAS discovery task failed:%d\n",
-				    res);
-			goto ex_err;
-		}
-		wait_for_completion(&task->completion);
-		res = -ETASK;
-		if (task->task_state_flags & SAS_TASK_STATE_ABORTED) {
-			int res2;
-			SAS_DPRINTK("task aborted, flags:0x%x\n",
-				    task->task_state_flags);
-			res2 = i->dft->lldd_abort_task(task);
-			SAS_DPRINTK("came back from abort task\n");
-			if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
-				if (res2 == TMF_RESP_FUNC_COMPLETE)
-					continue; /* Retry the task */
-				else
-					goto ex_err;
-			}
-		}
-		if (task->task_status.stat == SAM_BUSY ||
-			   task->task_status.stat == SAM_TASK_SET_FULL ||
-			   task->task_status.stat == SAS_QUEUE_FULL) {
-			SAS_DPRINTK("task: q busy, sleeping...\n");
-			schedule_timeout_interruptible(HZ);
-		} else if (task->task_status.stat == SAM_CHECK_COND) {
-			struct scsi_sense_hdr shdr;
-
-			if (!scsi_normalize_sense(ts->buf, ts->buf_valid_size,
-						  &shdr)) {
-				SAS_DPRINTK("couldn't normalize sense\n");
-				continue;
-			}
-			if ((shdr.sense_key == 6 && shdr.asc == 0x29) ||
-			    (shdr.sense_key == 2 && shdr.asc == 4 &&
-			     shdr.ascq == 1)) {
-				SAS_DPRINTK("device %016llx LUN: %016llx "
-					    "powering up or not ready yet, "
-					    "sleeping...\n",
-					    SAS_ADDR(task->dev->sas_addr),
-					    SAS_ADDR(task->ssp_task.LUN));
-
-				schedule_timeout_interruptible(5*HZ);
-			} else if (shdr.sense_key == 1) {
-				res = 0;
-				break;
-			} else if (shdr.sense_key == 5) {
-				break;
-			} else {
-				SAS_DPRINTK("dev %016llx LUN: %016llx "
-					    "sense key:0x%x ASC:0x%x ASCQ:0x%x"
-					    "\n",
-					    SAS_ADDR(task->dev->sas_addr),
-					    SAS_ADDR(task->ssp_task.LUN),
-					    shdr.sense_key,
-					    shdr.asc, shdr.ascq);
-			}
-		} else if (task->task_status.resp != SAS_TASK_COMPLETE ||
-			   task->task_status.stat != SAM_GOOD) {
-			SAS_DPRINTK("task finished with resp:0x%x, "
-				    "stat:0x%x\n",
-				    task->task_status.resp,
-				    task->task_status.stat);
-			goto ex_err;
-		} else {
-			res = 0;
-			break;
-		}
-	}
-ex_err:
-	if (pci_dma_dir != PCI_DMA_NONE)
-		kfree(scatter);
-out:
-	return res;
-}
-
 /* ---------- Domain device discovery ---------- */
 
 /**
@@ -255,6 +112,7 @@ static int sas_get_port_device(struct asd_sas_port *port)
 
 	switch (dev->dev_type) {
 	case SAS_END_DEV:
+	case SATA_DEV:
 		rphy = sas_end_device_alloc(port->port);
 		break;
 	case EDGE_DEV:
@@ -265,7 +123,6 @@ static int sas_get_port_device(struct asd_sas_port *port)
 		rphy = sas_expander_alloc(port->port,
 					  SAS_FANOUT_EXPANDER_DEVICE);
 		break;
-	case SATA_DEV:
 	default:
 		printk("ERROR: Unidentified device type %d\n", dev->dev_type);
 		rphy = NULL;
@@ -292,207 +149,15 @@ static int sas_get_port_device(struct asd_sas_port *port)
 	port->disc.max_level = 0;
 
 	dev->rphy = rphy;
-	spin_lock(&port->dev_list_lock);
+	spin_lock_irq(&port->dev_list_lock);
 	list_add_tail(&dev->dev_list_node, &port->dev_list);
-	spin_unlock(&port->dev_list_lock);
+	spin_unlock_irq(&port->dev_list_lock);
 
 	return 0;
 }
 
 /* ---------- Discover and Revalidate ---------- */
 
-/* ---------- SATA ---------- */
-
-static void sas_get_ata_command_set(struct domain_device *dev)
-{
-	struct dev_to_host_fis *fis =
-		(struct dev_to_host_fis *) dev->frame_rcvd;
-
-	if ((fis->sector_count == 1 && /* ATA */
-	     fis->lbal         == 1 &&
-	     fis->lbam         == 0 &&
-	     fis->lbah         == 0 &&
-	     fis->device       == 0)
-	    ||
-	    (fis->sector_count == 0 && /* CE-ATA (mATA) */
-	     fis->lbal         == 0 &&
-	     fis->lbam         == 0xCE &&
-	     fis->lbah         == 0xAA &&
-	     (fis->device & ~0x10) == 0))
-
-		dev->sata_dev.command_set = ATA_COMMAND_SET;
-
-	else if ((fis->interrupt_reason == 1 &&	/* ATAPI */
-		  fis->lbal             == 1 &&
-		  fis->byte_count_low   == 0x14 &&
-		  fis->byte_count_high  == 0xEB &&
-		  (fis->device & ~0x10) == 0))
-
-		dev->sata_dev.command_set = ATAPI_COMMAND_SET;
-
-	else if ((fis->sector_count == 1 && /* SEMB */
-		  fis->lbal         == 1 &&
-		  fis->lbam         == 0x3C &&
-		  fis->lbah         == 0xC3 &&
-		  fis->device       == 0)
-		||
-		 (fis->interrupt_reason == 1 &&	/* SATA PM */
-		  fis->lbal             == 1 &&
-		  fis->byte_count_low   == 0x69 &&
-		  fis->byte_count_high  == 0x96 &&
-		  (fis->device & ~0x10) == 0))
-
-		/* Treat it as a superset? */
-		dev->sata_dev.command_set = ATAPI_COMMAND_SET;
-}
-
-/**
- * sas_issue_ata_cmd -- Basic SATA command processing for discovery
- * @dev: the device to send the command to
- * @command: the command register
- * @features: the features register
- * @buffer: pointer to buffer to do I/O
- * @size: size of @buffer
- * @pci_dma_dir: PCI_DMA_...
- */
-static int sas_issue_ata_cmd(struct domain_device *dev, u8 command,
-			     u8 features, void *buffer, int size,
-			     int pci_dma_dir)
-{
-	int res = 0;
-	struct sas_task *task;
-	struct dev_to_host_fis *d2h_fis = (struct dev_to_host_fis *)
-		&dev->frame_rcvd[0];
-
-	res = -ENOMEM;
-	task = sas_alloc_task(GFP_KERNEL);
-	if (!task)
-		goto out;
-
-	task->dev = dev;
-
-	task->ata_task.fis.command = command;
-	task->ata_task.fis.features = features;
-	task->ata_task.fis.device = d2h_fis->device;
-	task->ata_task.retry_count = 1;
-
-	res = sas_execute_task(task, buffer, size, pci_dma_dir);
-
-	sas_free_task(task);
-out:
-	return res;
-}
-
-static void sas_sata_propagate_sas_addr(struct domain_device *dev)
-{
-	unsigned long flags;
-	struct asd_sas_port *port = dev->port;
-	struct asd_sas_phy  *phy;
-
-	BUG_ON(dev->parent);
-
-	memcpy(port->attached_sas_addr, dev->sas_addr, SAS_ADDR_SIZE);
-	spin_lock_irqsave(&port->phy_list_lock, flags);
-	list_for_each_entry(phy, &port->phy_list, port_phy_el)
-		memcpy(phy->attached_sas_addr, dev->sas_addr, SAS_ADDR_SIZE);
-	spin_unlock_irqrestore(&port->phy_list_lock, flags);
-}
-
-#define ATA_IDENTIFY_DEV         0xEC
-#define ATA_IDENTIFY_PACKET_DEV  0xA1
-#define ATA_SET_FEATURES         0xEF
-#define ATA_FEATURE_PUP_STBY_SPIN_UP 0x07
-
-/**
- * sas_discover_sata_dev -- discover a STP/SATA device (SATA_DEV)
- * @dev: STP/SATA device of interest (ATA/ATAPI)
- *
- * The LLDD has already been notified of this device, so that we can
- * send FISes to it.  Here we try to get IDENTIFY DEVICE or IDENTIFY
- * PACKET DEVICE, if ATAPI device, so that the LLDD can fine-tune its
- * performance for this device.
- */
-static int sas_discover_sata_dev(struct domain_device *dev)
-{
-	int     res;
-	__le16  *identify_x;
-	u8      command;
-
-	identify_x = kzalloc(512, GFP_KERNEL);
-	if (!identify_x)
-		return -ENOMEM;
-
-	if (dev->sata_dev.command_set == ATA_COMMAND_SET) {
-		dev->sata_dev.identify_device = identify_x;
-		command = ATA_IDENTIFY_DEV;
-	} else {
-		dev->sata_dev.identify_packet_device = identify_x;
-		command = ATA_IDENTIFY_PACKET_DEV;
-	}
-
-	res = sas_issue_ata_cmd(dev, command, 0, identify_x, 512,
-				PCI_DMA_FROMDEVICE);
-	if (res)
-		goto out_err;
-
-	/* lives on the media? */
-	if (le16_to_cpu(identify_x[0]) & 4) {
-		/* incomplete response */
-		SAS_DPRINTK("sending SET FEATURE/PUP_STBY_SPIN_UP to "
-			    "dev %llx\n", SAS_ADDR(dev->sas_addr));
-		if (!le16_to_cpu(identify_x[83] & (1<<6)))
-			goto cont1;
-		res = sas_issue_ata_cmd(dev, ATA_SET_FEATURES,
-					ATA_FEATURE_PUP_STBY_SPIN_UP,
-					NULL, 0, PCI_DMA_NONE);
-		if (res)
-			goto cont1;
-
-		schedule_timeout_interruptible(5*HZ); /* More time? */
-		res = sas_issue_ata_cmd(dev, command, 0, identify_x, 512,
-					PCI_DMA_FROMDEVICE);
-		if (res)
-			goto out_err;
-	}
-cont1:
-	/* Get WWN */
-	if (dev->port->oob_mode != SATA_OOB_MODE) {
-		memcpy(dev->sas_addr, dev->sata_dev.rps_resp.rps.stp_sas_addr,
-		       SAS_ADDR_SIZE);
-	} else if (dev->sata_dev.command_set == ATA_COMMAND_SET &&
-		   (le16_to_cpu(dev->sata_dev.identify_device[108]) & 0xF000)
-		   == 0x5000) {
-		int i;
-
-		for (i = 0; i < 4; i++) {
-			dev->sas_addr[2*i] =
-	     (le16_to_cpu(dev->sata_dev.identify_device[108+i]) & 0xFF00) >> 8;
-			dev->sas_addr[2*i+1] =
-	      le16_to_cpu(dev->sata_dev.identify_device[108+i]) & 0x00FF;
-		}
-	}
-	sas_hash_addr(dev->hashed_sas_addr, dev->sas_addr);
-	if (!dev->parent)
-		sas_sata_propagate_sas_addr(dev);
-
-	/* XXX Hint: register this SATA device with SATL.
-	   When this returns, dev->sata_dev->lu is alive and
-	   present.
-	sas_satl_register_dev(dev);
-	*/
-	return 0;
-out_err:
-	dev->sata_dev.identify_packet_device = NULL;
-	dev->sata_dev.identify_device = NULL;
-	kfree(identify_x);
-	return res;
-}
-
-static int sas_discover_sata_pm(struct domain_device *dev)
-{
-	return -ENODEV;
-}
-
 int sas_notify_lldd_dev_found(struct domain_device *dev)
 {
 	int res = 0;
@@ -525,60 +190,6 @@ void sas_notify_lldd_dev_gone(struct domain_device *dev)
 
 /* ---------- Common/dispatchers ---------- */
 
-/**
- * sas_discover_sata -- discover an STP/SATA domain device
- * @dev: pointer to struct domain_device of interest
- *
- * First we notify the LLDD of this device, so we can send frames to
- * it.  Then depending on the type of device we call the appropriate
- * discover functions.  Once device discover is done, we notify the
- * LLDD so that it can fine-tune its parameters for the device, by
- * removing it and then adding it.  That is, the second time around,
- * the driver would have certain fields, that it is looking at, set.
- * Finally we initialize the kobj so that the device can be added to
- * the system at registration time.  Devices directly attached to a HA
- * port, have no parents.  All other devices do, and should have their
- * "parent" pointer set appropriately before calling this function.
- */
-int sas_discover_sata(struct domain_device *dev)
-{
-	int res;
-
-	sas_get_ata_command_set(dev);
-
-	res = sas_notify_lldd_dev_found(dev);
-	if (res)
-		goto out_err2;
-
-	switch (dev->dev_type) {
-	case SATA_DEV:
-		res = sas_discover_sata_dev(dev);
-		break;
-	case SATA_PM:
-		res = sas_discover_sata_pm(dev);
-		break;
-	default:
-		break;
-	}
-	if (res)
-		goto out_err;
-
-	sas_notify_lldd_dev_gone(dev);
-	res = sas_notify_lldd_dev_found(dev);
-	if (res)
-		goto out_err2;
-
-	res = sas_rphy_add(dev->rphy);
-	if (res)
-		goto out_err;
-
-	return res;
-
-out_err:
-	sas_notify_lldd_dev_gone(dev);
-out_err2:
-	return res;
-}
 
 /**
  * sas_discover_end_dev -- discover an end device (SSP, etc)
@@ -685,11 +296,14 @@ static void sas_discover_domain(struct work_struct *work)
 	case FANOUT_DEV:
 		error = sas_discover_root_expander(dev);
 		break;
+#ifdef CONFIG_SCSI_SAS_ATA
 	case SATA_DEV:
 	case SATA_PM:
 		error = sas_discover_sata(dev);
 		break;
+#endif
 	default:
+		error = -ENXIO;
 		SAS_DPRINTK("unhandled device %d\n", dev->dev_type);
 		break;
 	}
@@ -698,9 +312,9 @@ static void sas_discover_domain(struct work_struct *work)
 		sas_rphy_free(dev->rphy);
 		dev->rphy = NULL;
 
-		spin_lock(&port->dev_list_lock);
+		spin_lock_irq(&port->dev_list_lock);
 		list_del_init(&dev->dev_list_node);
-		spin_unlock(&port->dev_list_lock);
+		spin_unlock_irq(&port->dev_list_lock);
 
 		kfree(dev); /* not kobject_register-ed yet */
 		port->port_dev = NULL;
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 23e90c5f8f3..b500f0c1449 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -23,6 +23,7 @@
  */
 
 #include <linux/scatterlist.h>
+#include <linux/blkdev.h>
 
 #include "sas_internal.h"
 
@@ -36,14 +37,6 @@ static int sas_configure_phy(struct domain_device *dev, int phy_id,
 			     u8 *sas_addr, int include);
 static int sas_disable_routing(struct domain_device *dev,  u8 *sas_addr);
 
-#if 0
-/* FIXME: smp needs to migrate into the sas class */
-static ssize_t smp_portal_read(struct kobject *, struct bin_attribute *,
-			       char *, loff_t, size_t);
-static ssize_t smp_portal_write(struct kobject *, struct bin_attribute *,
-				char *, loff_t, size_t);
-#endif
-
 /* ---------- SMP task management ---------- */
 
 static void smp_task_timedout(unsigned long _task)
@@ -220,6 +213,36 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id,
 #define DISCOVER_REQ_SIZE  16
 #define DISCOVER_RESP_SIZE 56
 
+static int sas_ex_phy_discover_helper(struct domain_device *dev, u8 *disc_req,
+				      u8 *disc_resp, int single)
+{
+	int i, res;
+
+	disc_req[9] = single;
+	for (i = 1 ; i < 3; i++) {
+		struct discover_resp *dr;
+
+		res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE,
+				       disc_resp, DISCOVER_RESP_SIZE);
+		if (res)
+			return res;
+		/* This is detecting a failure to transmit inital
+		 * dev to host FIS as described in section G.5 of
+		 * sas-2 r 04b */
+		dr = &((struct smp_resp *)disc_resp)->disc;
+		if (!(dr->attached_dev_type == 0 &&
+		      dr->attached_sata_dev))
+			break;
+		/* In order to generate the dev to host FIS, we
+		 * send a link reset to the expander port */
+		sas_smp_phy_control(dev, single, PHY_FUNC_LINK_RESET, NULL);
+		/* Wait for the reset to trigger the negotiation */
+		msleep(500);
+	}
+	sas_set_ex_phy(dev, single, disc_resp);
+	return 0;
+}
+
 static int sas_ex_phy_discover(struct domain_device *dev, int single)
 {
 	struct expander_device *ex = &dev->ex_dev;
@@ -240,23 +263,15 @@ static int sas_ex_phy_discover(struct domain_device *dev, int single)
 	disc_req[1] = SMP_DISCOVER;
 
 	if (0 <= single && single < ex->num_phys) {
-		disc_req[9] = single;
-		res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE,
-				       disc_resp, DISCOVER_RESP_SIZE);
-		if (res)
-			goto out_err;
-		sas_set_ex_phy(dev, single, disc_resp);
+		res = sas_ex_phy_discover_helper(dev, disc_req, disc_resp, single);
 	} else {
 		int i;
 
 		for (i = 0; i < ex->num_phys; i++) {
-			disc_req[9] = i;
-			res = smp_execute_task(dev, disc_req,
-					       DISCOVER_REQ_SIZE, disc_resp,
-					       DISCOVER_RESP_SIZE);
+			res = sas_ex_phy_discover_helper(dev, disc_req,
+							 disc_resp, i);
 			if (res)
 				goto out_err;
-			sas_set_ex_phy(dev, i, disc_resp);
 		}
 	}
 out_err:
@@ -520,6 +535,8 @@ int sas_smp_get_phy_events(struct sas_phy *phy)
 
 }
 
+#ifdef CONFIG_SCSI_SAS_ATA
+
 #define RPS_REQ_SIZE  16
 #define RPS_RESP_SIZE 60
 
@@ -529,6 +546,7 @@ static int sas_get_report_phy_sata(struct domain_device *dev,
 {
 	int res;
 	u8 *rps_req = alloc_smp_req(RPS_REQ_SIZE);
+	u8 *resp = (u8 *)rps_resp;
 
 	if (!rps_req)
 		return -ENOMEM;
@@ -539,9 +557,30 @@ static int sas_get_report_phy_sata(struct domain_device *dev,
 	res = smp_execute_task(dev, rps_req, RPS_REQ_SIZE,
 			            rps_resp, RPS_RESP_SIZE);
 
+	/* 0x34 is the FIS type for the D2H fis.  There's a potential
+	 * standards cockup here.  sas-2 explicitly specifies the FIS
+	 * should be encoded so that FIS type is in resp[24].
+	 * However, some expanders endian reverse this.  Undo the
+	 * reversal here */
+	if (!res && resp[27] == 0x34 && resp[24] != 0x34) {
+		int i;
+
+		for (i = 0; i < 5; i++) {
+			int j = 24 + (i*4);
+			u8 a, b;
+			a = resp[j + 0];
+			b = resp[j + 1];
+			resp[j + 0] = resp[j + 3];
+			resp[j + 1] = resp[j + 2];
+			resp[j + 2] = b;
+			resp[j + 3] = a;
+		}
+	}
+
 	kfree(rps_req);
-	return 0;
+	return res;
 }
+#endif
 
 static void sas_ex_get_linkrate(struct domain_device *parent,
 				       struct domain_device *child,
@@ -609,6 +648,7 @@ static struct domain_device *sas_ex_discover_end_dev(
 	}
 	sas_ex_get_linkrate(parent, child, phy);
 
+#ifdef CONFIG_SCSI_SAS_ATA
 	if ((phy->attached_tproto & SAS_PROTO_STP) || phy->attached_sata_dev) {
 		child->dev_type = SATA_DEV;
 		if (phy->attached_tproto & SAS_PROTO_STP)
@@ -625,16 +665,30 @@ static struct domain_device *sas_ex_discover_end_dev(
 		}
 		memcpy(child->frame_rcvd, &child->sata_dev.rps_resp.rps.fis,
 		       sizeof(struct dev_to_host_fis));
+
+		rphy = sas_end_device_alloc(phy->port);
+		if (unlikely(!rphy))
+			goto out_free;
+
 		sas_init_dev(child);
+
+		child->rphy = rphy;
+
+		spin_lock_irq(&parent->port->dev_list_lock);
+		list_add_tail(&child->dev_list_node, &parent->port->dev_list);
+		spin_unlock_irq(&parent->port->dev_list_lock);
+
 		res = sas_discover_sata(child);
 		if (res) {
 			SAS_DPRINTK("sas_discover_sata() for device %16llx at "
 				    "%016llx:0x%x returned 0x%x\n",
 				    SAS_ADDR(child->sas_addr),
 				    SAS_ADDR(parent->sas_addr), phy_id, res);
-			goto out_free;
+			goto out_list_del;
 		}
-	} else if (phy->attached_tproto & SAS_PROTO_SSP) {
+	} else
+#endif
+	  if (phy->attached_tproto & SAS_PROTO_SSP) {
 		child->dev_type = SAS_END_DEV;
 		rphy = sas_end_device_alloc(phy->port);
 		/* FIXME: error handling */
@@ -646,9 +700,9 @@ static struct domain_device *sas_ex_discover_end_dev(
 		child->rphy = rphy;
 		sas_fill_in_rphy(child, rphy);
 
-		spin_lock(&parent->port->dev_list_lock);
+		spin_lock_irq(&parent->port->dev_list_lock);
 		list_add_tail(&child->dev_list_node, &parent->port->dev_list);
-		spin_unlock(&parent->port->dev_list_lock);
+		spin_unlock_irq(&parent->port->dev_list_lock);
 
 		res = sas_discover_end_dev(child);
 		if (res) {
@@ -662,6 +716,7 @@ static struct domain_device *sas_ex_discover_end_dev(
 		SAS_DPRINTK("target proto 0x%x at %016llx:0x%x not handled\n",
 			    phy->attached_tproto, SAS_ADDR(parent->sas_addr),
 			    phy_id);
+		goto out_free;
 	}
 
 	list_add_tail(&child->siblings, &parent_ex->children);
@@ -761,9 +816,9 @@ static struct domain_device *sas_ex_discover_expander(
 	sas_fill_in_rphy(child, rphy);
 	sas_rphy_add(rphy);
 
-	spin_lock(&parent->port->dev_list_lock);
+	spin_lock_irq(&parent->port->dev_list_lock);
 	list_add_tail(&child->dev_list_node, &parent->port->dev_list);
-	spin_unlock(&parent->port->dev_list_lock);
+	spin_unlock_irq(&parent->port->dev_list_lock);
 
 	res = sas_discover_expander(child);
 	if (res) {
@@ -1359,30 +1414,6 @@ static int sas_disable_routing(struct domain_device *dev,  u8 *sas_addr)
 	return 0;
 }
 
-#if 0
-#define SMP_BIN_ATTR_NAME "smp_portal"
-
-static void sas_ex_smp_hook(struct domain_device *dev)
-{
-	struct expander_device *ex_dev = &dev->ex_dev;
-	struct bin_attribute *bin_attr = &ex_dev->smp_bin_attr;
-
-	memset(bin_attr, 0, sizeof(*bin_attr));
-
-	bin_attr->attr.name = SMP_BIN_ATTR_NAME;
-	bin_attr->attr.mode = 0600;
-
-	bin_attr->size = 0;
-	bin_attr->private = NULL;
-	bin_attr->read = smp_portal_read;
-	bin_attr->write= smp_portal_write;
-	bin_attr->mmap = NULL;
-
-	ex_dev->smp_portal_pid = -1;
-	init_MUTEX(&ex_dev->smp_sema);
-}
-#endif
-
 /**
  * sas_discover_expander -- expander discovery
  * @ex: pointer to expander domain device
@@ -1844,76 +1875,49 @@ out:
 	return res;
 }
 
-#if 0
-/* ---------- SMP portal ---------- */
-
-static ssize_t smp_portal_write(struct kobject *kobj,
-				struct bin_attribute *bin_attr,
-				char *buf, loff_t offs, size_t size)
+int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
+		    struct request *req)
 {
-	struct domain_device *dev = to_dom_device(kobj);
-	struct expander_device *ex = &dev->ex_dev;
-
-	if (offs != 0)
-		return -EFBIG;
-	else if (size == 0)
-		return 0;
+	struct domain_device *dev;
+	int ret, type = rphy->identify.device_type;
+	struct request *rsp = req->next_rq;
 
-	down_interruptible(&ex->smp_sema);
-	if (ex->smp_req)
-		kfree(ex->smp_req);
-	ex->smp_req = kzalloc(size, GFP_USER);
-	if (!ex->smp_req) {
-		up(&ex->smp_sema);
-		return -ENOMEM;
+	if (!rsp) {
+		printk("%s: space for a smp response is missing\n",
+		       __FUNCTION__);
+		return -EINVAL;
 	}
-	memcpy(ex->smp_req, buf, size);
-	ex->smp_req_size = size;
-	ex->smp_portal_pid = current->pid;
-	up(&ex->smp_sema);
 
-	return size;
-}
-
-static ssize_t smp_portal_read(struct kobject *kobj,
-			       struct bin_attribute *bin_attr,
-			       char *buf, loff_t offs, size_t size)
-{
-	struct domain_device *dev = to_dom_device(kobj);
-	struct expander_device *ex = &dev->ex_dev;
-	u8 *smp_resp;
-	int res = -EINVAL;
-
-	/* XXX: sysfs gives us an offset of 0x10 or 0x8 while in fact
-	 *  it should be 0.
-	 */
+	/* seems aic94xx doesn't support */
+	if (!rphy) {
+		printk("%s: can we send a smp request to a host?\n",
+		       __FUNCTION__);
+		return -EINVAL;
+	}
 
-	down_interruptible(&ex->smp_sema);
-	if (!ex->smp_req || ex->smp_portal_pid != current->pid)
-		goto out;
+	if (type != SAS_EDGE_EXPANDER_DEVICE &&
+	    type != SAS_FANOUT_EXPANDER_DEVICE) {
+		printk("%s: can we send a smp request to a device?\n",
+		       __FUNCTION__);
+		return -EINVAL;
+	}
 
-	res = 0;
-	if (size == 0)
-		goto out;
+	dev = sas_find_dev_by_rphy(rphy);
+	if (!dev) {
+		printk("%s: fail to find a domain_device?\n", __FUNCTION__);
+		return -EINVAL;
+	}
 
-	res = -ENOMEM;
-	smp_resp = alloc_smp_resp(size);
-	if (!smp_resp)
-		goto out;
-	res = smp_execute_task(dev, ex->smp_req, ex->smp_req_size,
-			       smp_resp, size);
-	if (!res) {
-		memcpy(buf, smp_resp, size);
-		res = size;
+	/* do we need to support multiple segments? */
+	if (req->bio->bi_vcnt > 1 || rsp->bio->bi_vcnt > 1) {
+		printk("%s: multiple segments req %u %u, rsp %u %u\n",
+		       __FUNCTION__, req->bio->bi_vcnt, req->data_len,
+		       rsp->bio->bi_vcnt, rsp->data_len);
+		return -EINVAL;
 	}
 
-	kfree(smp_resp);
-out:
-	kfree(ex->smp_req);
-	ex->smp_req = NULL;
-	ex->smp_req_size = 0;
-	ex->smp_portal_pid = -1;
-	up(&ex->smp_sema);
-	return res;
+	ret = smp_execute_task(dev, bio_data(req->bio), req->data_len,
+			       bio_data(rsp->bio), rsp->data_len);
+
+	return ret;
 }
-#endif
diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c
index 1396c83b0c9..9cd5abe9e71 100644
--- a/drivers/scsi/libsas/sas_init.c
+++ b/drivers/scsi/libsas/sas_init.c
@@ -259,6 +259,7 @@ static struct sas_function_template sft = {
 	.phy_reset = sas_phy_reset,
 	.set_phy_speed = sas_set_phy_speed,
 	.get_linkerrors = sas_get_linkerrors,
+	.smp_handler = sas_smp_handler,
 };
 
 struct scsi_transport_template *
diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h
index a78638df201..2b8213b1832 100644
--- a/drivers/scsi/libsas/sas_internal.h
+++ b/drivers/scsi/libsas/sas_internal.h
@@ -39,6 +39,9 @@
 #define SAS_DPRINTK(fmt, ...)
 #endif
 
+#define TO_SAS_TASK(_scsi_cmd)  ((void *)(_scsi_cmd)->host_scribble)
+#define ASSIGN_SAS_TASK(_sc, _t) do { (_sc)->host_scribble = (void *) _t; } while (0)
+
 void sas_scsi_recover_host(struct Scsi_Host *shost);
 
 int sas_show_class(enum sas_class class, char *buf);
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index 9c5342e7a69..7663841eb4c 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -34,6 +34,7 @@
 #include <scsi/scsi_eh.h>
 #include <scsi/scsi_transport.h>
 #include <scsi/scsi_transport_sas.h>
+#include <scsi/sas_ata.h>
 #include "../scsi_sas_internal.h"
 #include "../scsi_transport_api.h"
 #include "../scsi_priv.h"
@@ -42,12 +43,10 @@
 #include <linux/blkdev.h>
 #include <linux/freezer.h>
 #include <linux/scatterlist.h>
+#include <linux/libata.h>
 
 /* ---------- SCSI Host glue ---------- */
 
-#define TO_SAS_TASK(_scsi_cmd)  ((void *)(_scsi_cmd)->host_scribble)
-#define ASSIGN_SAS_TASK(_sc, _t) do { (_sc)->host_scribble = (void *) _t; } while (0)
-
 static void sas_scsi_task_done(struct sas_task *task)
 {
 	struct task_status_struct *ts = &task->task_status;
@@ -172,7 +171,7 @@ static struct sas_task *sas_create_task(struct scsi_cmnd *cmd,
 	return task;
 }
 
-static int sas_queue_up(struct sas_task *task)
+int sas_queue_up(struct sas_task *task)
 {
 	struct sas_ha_struct *sas_ha = task->dev->port->ha;
 	struct scsi_core *core = &sas_ha->core;
@@ -213,6 +212,16 @@ int sas_queuecommand(struct scsi_cmnd *cmd,
 		struct sas_ha_struct *sas_ha = dev->port->ha;
 		struct sas_task *task;
 
+		if (dev_is_sata(dev)) {
+			unsigned long flags;
+
+			spin_lock_irqsave(dev->sata_dev.ap->lock, flags);
+			res = ata_sas_queuecmd(cmd, scsi_done,
+					       dev->sata_dev.ap);
+			spin_unlock_irqrestore(dev->sata_dev.ap->lock, flags);
+			goto out;
+		}
+
 		res = -ENOMEM;
 		task = sas_create_task(cmd, dev, GFP_ATOMIC);
 		if (!task)
@@ -684,6 +693,16 @@ enum scsi_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *cmd)
 	return EH_NOT_HANDLED;
 }
 
+int sas_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
+{
+	struct domain_device *dev = sdev_to_domain_dev(sdev);
+
+	if (dev_is_sata(dev))
+		return ata_scsi_ioctl(sdev, cmd, arg);
+
+	return -EINVAL;
+}
+
 struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy)
 {
 	struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent);
@@ -723,10 +742,17 @@ static inline struct domain_device *sas_find_target(struct scsi_target *starget)
 int sas_target_alloc(struct scsi_target *starget)
 {
 	struct domain_device *found_dev = sas_find_target(starget);
+	int res;
 
 	if (!found_dev)
 		return -ENODEV;
 
+	if (dev_is_sata(found_dev)) {
+		res = sas_ata_init_host_and_port(found_dev, starget);
+		if (res)
+			return res;
+	}
+
 	starget->hostdata = found_dev;
 	return 0;
 }
@@ -741,6 +767,11 @@ int sas_slave_configure(struct scsi_device *scsi_dev)
 
 	BUG_ON(dev->rphy->identify.device_type != SAS_END_DEVICE);
 
+	if (dev_is_sata(dev)) {
+		ata_sas_slave_configure(scsi_dev, dev->sata_dev.ap);
+		return 0;
+	}
+
 	sas_ha = dev->port->ha;
 
 	sas_read_port_mode_page(scsi_dev);
@@ -764,6 +795,10 @@ int sas_slave_configure(struct scsi_device *scsi_dev)
 
 void sas_slave_destroy(struct scsi_device *scsi_dev)
 {
+	struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
+
+	if (dev_is_sata(dev))
+		ata_port_disable(dev->sata_dev.ap);
 }
 
 int sas_change_queue_depth(struct scsi_device *scsi_dev, int new_depth)
@@ -980,10 +1015,38 @@ void sas_task_abort(struct sas_task *task)
 		return;
 	}
 
+	if (dev_is_sata(task->dev)) {
+		sas_ata_task_abort(task);
+		return;
+	}
+
 	scsi_req_abort_cmd(sc);
 	scsi_schedule_eh(sc->device->host);
 }
 
+int sas_slave_alloc(struct scsi_device *scsi_dev)
+{
+	struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
+
+	if (dev_is_sata(dev))
+		return ata_sas_port_init(dev->sata_dev.ap);
+
+	return 0;
+}
+
+void sas_target_destroy(struct scsi_target *starget)
+{
+	struct domain_device *found_dev = sas_find_target(starget);
+
+	if (!found_dev)
+		return;
+
+	if (dev_is_sata(found_dev))
+		ata_sas_port_destroy(found_dev->sata_dev.ap);
+
+	return;
+}
+
 EXPORT_SYMBOL_GPL(sas_queuecommand);
 EXPORT_SYMBOL_GPL(sas_target_alloc);
 EXPORT_SYMBOL_GPL(sas_slave_configure);
@@ -997,3 +1060,6 @@ EXPORT_SYMBOL_GPL(sas_phy_reset);
 EXPORT_SYMBOL_GPL(sas_phy_enable);
 EXPORT_SYMBOL_GPL(sas_eh_device_reset_handler);
 EXPORT_SYMBOL_GPL(sas_eh_bus_reset_handler);
+EXPORT_SYMBOL_GPL(sas_slave_alloc);
+EXPORT_SYMBOL_GPL(sas_target_destroy);
+EXPORT_SYMBOL_GPL(sas_ioctl);