summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/lpfc/lpfc_attr.c
diff options
context:
space:
mode:
authorJames Smart <James.Smart@Emulex.Com>2008-01-11 01:52:54 -0500
committerJames Bottomley <James.Bottomley@HansenPartnership.com>2008-01-23 11:29:22 -0600
commit0937282036d9ae798e02c9c69a8b2ef044048855 (patch)
tree55c8ef65c9c55e74e8985b58396516b3d3b925ad /drivers/scsi/lpfc/lpfc_attr.c
parent13815c8344a238c204e4f4339b22dc4833c6df0f (diff)
[SCSI] lpfc 8.2.4 : Miscellaneous Fixes
Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_attr.c')
-rw-r--r--drivers/scsi/lpfc/lpfc_attr.c32
1 files changed, 23 insertions, 9 deletions
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 68e92be1ef5..eb5a5ad4ffb 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2007 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2008 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -311,12 +311,14 @@ lpfc_do_offline(struct lpfc_hba *phba, uint32_t type)
psli = &phba->sli;
+ /* Wait a little for things to settle down, but not
+ * long enough for dev loss timeout to expire.
+ */
for (i = 0; i < psli->num_rings; i++) {
pring = &psli->ring[i];
- /* The linkdown event takes 30 seconds to timeout. */
while (pring->txcmplq_cnt) {
msleep(10);
- if (cnt++ > 3000) {
+ if (cnt++ > 500) { /* 5 secs */
lpfc_printf_log(phba,
KERN_WARNING, LOG_INIT,
"0466 Outstanding IO when "
@@ -989,7 +991,7 @@ lpfc_soft_wwpn_store(struct class_device *cdev, const char *buf, size_t count)
spin_lock_irq(&phba->hbalock);
if (phba->over_temp_state == HBA_OVER_TEMP) {
spin_unlock_irq(&phba->hbalock);
- return -EPERM;
+ return -EACCES;
}
spin_unlock_irq(&phba->hbalock);
/* count may include a LF at end of string */
@@ -1782,7 +1784,7 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr,
if (phba->over_temp_state == HBA_OVER_TEMP) {
sysfs_mbox_idle(phba);
spin_unlock_irq(&phba->hbalock);
- return -EPERM;
+ return -EACCES;
}
if (off == 0 &&
@@ -1801,9 +1803,7 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr,
case MBX_DUMP_CONTEXT:
case MBX_RUN_DIAGS:
case MBX_RESTART:
- case MBX_FLASH_WR_ULA:
case MBX_SET_MASK:
- case MBX_SET_SLIM:
case MBX_SET_DEBUG:
if (!(vport->fc_flag & FC_OFFLINE_MODE)) {
printk(KERN_WARNING "mbox_read:Command 0x%x "
@@ -1831,6 +1831,8 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr,
case MBX_LOAD_EXP_ROM:
case MBX_BEACON:
case MBX_DEL_LD_ENTRY:
+ case MBX_SET_VARIABLE:
+ case MBX_WRITE_WWN:
break;
case MBX_READ_SPARM64:
case MBX_READ_LA:
@@ -1852,6 +1854,17 @@ sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr,
return -EPERM;
}
+ /* If HBA encountered an error attention, allow only DUMP
+ * mailbox command until the HBA is restarted.
+ */
+ if ((phba->pport->stopped) &&
+ (phba->sysfs_mbox.mbox->mb.mbxCommand
+ != MBX_DUMP_MEMORY)) {
+ sysfs_mbox_idle(phba);
+ spin_unlock_irq(&phba->hbalock);
+ return -EPERM;
+ }
+
phba->sysfs_mbox.mbox->vport = vport;
if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO) {
@@ -2052,7 +2065,8 @@ lpfc_get_host_speed(struct Scsi_Host *shost)
fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
break;
}
- }
+ } else
+ fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
spin_unlock_irq(shost->host_lock);
}
@@ -2072,7 +2086,7 @@ lpfc_get_host_fabric_name (struct Scsi_Host *shost)
node_name = wwn_to_u64(phba->fc_fabparam.nodeName.u.wwn);
else
/* fabric is local port if there is no F/FL_Port */
- node_name = wwn_to_u64(vport->fc_nodename.u.wwn);
+ node_name = 0;
spin_unlock_irq(shost->host_lock);