[SCSI] lpfc 8.3.3 : Fix various SLI-3 vs SLI-4 differences

Contains the following changes
- Set the CT field of FDISC to 3
- Fixed over allocation of SCSI buffers on SLI4
- Removed unused jump table entries
- Increase LPFC_WQE_DEF_COUNT to 256
- Updated FDISC context to VPI
- Fixed immediate SCSI command for LUN reset translation to WQE
- Extended mailbox handling to allow MBX_POLL commands in between async
  MBQ commands
- Fixed SID used for FDISC
- Fix crash when accessing ctlregs from sysfs for SLI4 HBAs
- Fix SLI4 firmware version not being saved or displayed correctly
- Expand CQID field in WQE structure to 16 bits
- Fix post header template mailbox command timing out
- Removed FCoE PCI device ID 0x0705

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

1 files changed, 11 insertions, 3 deletions

diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 6bdeb14878a..2aabaf9c405 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -6108,9 +6108,17 @@ lpfc_issue_els_fdisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	icmd->un.elsreq64.myID = 0;
 	icmd->un.elsreq64.fl = 1;
 
-	/* For FDISC, Let FDISC rsp set the NPortID for this VPI */
-	icmd->ulpCt_h = 1;
-	icmd->ulpCt_l = 0;
+	if  (phba->sli_rev == LPFC_SLI_REV4) {
+		/* FDISC needs to be 1 for WQE VPI */
+		elsiocb->iocb.ulpCt_h = (SLI4_CT_VPI >> 1) & 1;
+		elsiocb->iocb.ulpCt_l = SLI4_CT_VPI & 1 ;
+		/* Set the ulpContext to the vpi */
+		elsiocb->iocb.ulpContext = vport->vpi + phba->vpi_base;
+	} else {
+		/* For FDISC, Let FDISC rsp set the NPortID for this VPI */
+		icmd->ulpCt_h = 1;
+		icmd->ulpCt_l = 0;
+	}
 
 	pcmd = (uint8_t *) (((struct lpfc_dmabuf *) elsiocb->context2)->virt);
 	*((uint32_t *) (pcmd)) = ELS_CMD_FDISC;