[SCSI] lpfc 8.3.0 : Fix multiple NPIV issues

- Fix lock up on rmmod with vports defined by having
  lpfc_pci_remove_one() invoke fc_vport_terminate() to remove all the
  vports before invoking fc_remove_host() for the physical port

- Fix echotest failure when NPIV is enabled

- Add the vport_disable function to the physical port's transport
  template to make the vport disable attribute visible

- Set the vport state to DISABLE on create if the disable flag is
  true

- Call lpfc_alloc_sysfs_attr() for vports so that statistical data
  collection works on them

- Support setting a vport's symbolic name via sysfs by writing to
  /sys/class/fc_vport/vportX/symbolic_name

- Fix create vport fails when link is down or in loop mode.  Should be
  able to be create vports any time NPIV is enabled

- Fix slow vport deletes when deleting multiple vports at once

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

1 files changed, 10 insertions, 18 deletions

diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c
index a7de1cc02b4..63b54c66756 100644
--- a/drivers/scsi/lpfc/lpfc_vport.c
+++ b/drivers/scsi/lpfc/lpfc_vport.c
@@ -288,10 +288,8 @@ lpfc_vport_create(struct fc_vport *fc_vport, bool disable)
 	int vpi;
 	int rc = VPORT_ERROR;
 	int status;
-	int size;
 
-	if ((phba->sli_rev < 3) ||
-		!(phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)) {
+	if ((phba->sli_rev < 3) || !(phba->cfg_enable_npiv)) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
 				"1808 Create VPORT failed: "
 				"NPIV is not enabled: SLImode:%d\n",
@@ -351,20 +349,6 @@ lpfc_vport_create(struct fc_vport *fc_vport, bool disable)
 
 	memcpy(vport->fc_portname.u.wwn, vport->fc_sparam.portName.u.wwn, 8);
 	memcpy(vport->fc_nodename.u.wwn, vport->fc_sparam.nodeName.u.wwn, 8);
-	size = strnlen(fc_vport->symbolic_name, LPFC_VNAME_LEN);
-	if (size) {
-		vport->vname = kzalloc(size+1, GFP_KERNEL);
-		if (!vport->vname) {
-			lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
-					 "1814 Create VPORT failed. "
-					 "vname allocation failed.\n");
-			rc = VPORT_ERROR;
-			lpfc_free_vpi(phba, vpi);
-			destroy_port(vport);
-			goto error_out;
-		}
-		memcpy(vport->vname, fc_vport->symbolic_name, size+1);
-	}
 	if (fc_vport->node_name != 0)
 		u64_to_wwn(fc_vport->node_name, vport->fc_nodename.u.wwn);
 	if (fc_vport->port_name != 0)
@@ -394,6 +378,9 @@ lpfc_vport_create(struct fc_vport *fc_vport, bool disable)
 		goto error_out;
 	}
 
+	/* Create binary sysfs attribute for vport */
+	lpfc_alloc_sysfs_attr(vport);
+
 	*(struct lpfc_vport **)fc_vport->dd_data = vport;
 	vport->fc_vport = fc_vport;
 
@@ -405,6 +392,7 @@ lpfc_vport_create(struct fc_vport *fc_vport, bool disable)
 	}
 
 	if (disable) {
+		lpfc_vport_set_state(vport, FC_VPORT_DISABLED);
 		rc = VPORT_OK;
 		goto out;
 	}
@@ -587,8 +575,12 @@ lpfc_vport_delete(struct fc_vport *fc_vport)
 	spin_lock_irq(&phba->hbalock);
 	vport->load_flag |= FC_UNLOADING;
 	spin_unlock_irq(&phba->hbalock);
-	kfree(vport->vname);
+
+	lpfc_free_sysfs_attr(vport);
+
 	lpfc_debugfs_terminate(vport);
+
+	/* Remove FC host and then SCSI host with the vport */
 	fc_remove_host(lpfc_shost_from_vport(vport));
 	scsi_remove_host(lpfc_shost_from_vport(vport));