[SCSI] mpt2sas: Adding MPI Headers - revision L

The new headers contain the following changes:
(1) Added IO Unit Page 7.
(2) Added new device ids for SAS2208.
(3) Added SAS IO Unit Page 5.
(4) Added partial and slumber power management capable flags to SAS Device
    Page 0 Flags field.
(5) Added PhyInfo defines for power condition.
(6) Added Ethernet configuration pages.

Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: Eric Moore <Eric.moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

1 files changed, 263 insertions, 3 deletions

diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
index 5af66dbe323..1611c57a6fd 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
@@ -6,7 +6,7 @@
  *          Title:  MPI Configuration messages and pages
  *  Creation Date:  November 10, 2006
  *
- *    mpi2_cnfg.h Version:  02.00.11
+ *    mpi2_cnfg.h Version:  02.00.12
  *
  *  Version History
  *  ---------------
@@ -100,6 +100,13 @@
  *                      Added expander reduced functionality data to SAS
  *                      Expander Page 0.
  *                      Added SAS PHY Page 2 and SAS PHY Page 3.
+ *  07-30-09  02.00.12  Added IO Unit Page 7.
+ *                      Added new device ids.
+ *                      Added SAS IO Unit Page 5.
+ *                      Added partial and slumber power management capable flags
+ *                      to SAS Device Page 0 Flags field.
+ *                      Added PhyInfo defines for power condition.
+ *                      Added Ethernet configuration pages.
  *  --------------------------------------------------------------------------
  */
 
@@ -182,6 +189,7 @@ typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION
 #define MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG         (0x16)
 #define MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING      (0x17)
 #define MPI2_CONFIG_EXTPAGETYPE_SAS_PORT            (0x18)
+#define MPI2_CONFIG_EXTPAGETYPE_ETHERNET            (0x19)
 
 
 /*****************************************************************************
@@ -268,6 +276,14 @@ typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION
 #define MPI2_DPM_PGAD_START_ENTRY_MASK              (0x0000FFFF)
 
 
+/* Ethernet PageAddress format */
+#define MPI2_ETHERNET_PGAD_FORM_MASK                (0xF0000000)
+#define MPI2_ETHERNET_PGAD_FORM_IF_NUM              (0x00000000)
+
+#define MPI2_ETHERNET_PGAD_IF_NUMBER_MASK           (0x000000FF)
+
+
+
 /****************************************************************************
 *   Configuration messages
 ****************************************************************************/
@@ -348,6 +364,7 @@ typedef struct _MPI2_CONFIG_REPLY
 #define MPI2_MFGPAGE_DEVID_SAS2108_3                (0x0077)
 #define MPI2_MFGPAGE_DEVID_SAS2116_1                (0x0064)
 #define MPI2_MFGPAGE_DEVID_SAS2116_2                (0x0065)
+
 #define MPI2_MFGPAGE_DEVID_SAS2208_1                (0x0080)
 #define MPI2_MFGPAGE_DEVID_SAS2208_2                (0x0081)
 #define MPI2_MFGPAGE_DEVID_SAS2208_3                (0x0082)
@@ -795,6 +812,56 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_6 {
 #define MPI2_IOUNITPAGE6_FLAGS_ENABLE_RAID_ACCELERATOR  (0x0001)
 
 
+/* IO Unit Page 7 */
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 {
+    MPI2_CONFIG_PAGE_HEADER Header;                                 /* 0x00 */
+    U16                     Reserved1;                              /* 0x04 */
+    U8                      PCIeWidth;                              /* 0x06 */
+    U8                      PCIeSpeed;                              /* 0x07 */
+    U32                     ProcessorState;                         /* 0x08 */
+    U32                     Reserved2;                              /* 0x0C */
+    U16                     IOCTemperature;                         /* 0x10 */
+    U8                      IOCTemperatureUnits;                    /* 0x12 */
+    U8                      IOCSpeed;                               /* 0x13 */
+    U32                     Reserved3;                              /* 0x14 */
+} MPI2_CONFIG_PAGE_IO_UNIT_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_7,
+  Mpi2IOUnitPage7_t, MPI2_POINTER pMpi2IOUnitPage7_t;
+
+#define MPI2_IOUNITPAGE7_PAGEVERSION                    (0x00)
+
+/* defines for IO Unit Page 7 PCIeWidth field */
+#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X1              (0x01)
+#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X2              (0x02)
+#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X4              (0x04)
+#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X8              (0x08)
+
+/* defines for IO Unit Page 7 PCIeSpeed field */
+#define MPI2_IOUNITPAGE7_PCIE_SPEED_2_5_GBPS        (0x00)
+#define MPI2_IOUNITPAGE7_PCIE_SPEED_5_0_GBPS        (0x01)
+#define MPI2_IOUNITPAGE7_PCIE_SPEED_8_0_GBPS        (0x02)
+
+/* defines for IO Unit Page 7 ProcessorState field */
+#define MPI2_IOUNITPAGE7_PSTATE_MASK_SECOND         (0x0000000F)
+#define MPI2_IOUNITPAGE7_PSTATE_SHIFT_SECOND        (0)
+
+#define MPI2_IOUNITPAGE7_PSTATE_NOT_PRESENT         (0x00)
+#define MPI2_IOUNITPAGE7_PSTATE_DISABLED            (0x01)
+#define MPI2_IOUNITPAGE7_PSTATE_ENABLED             (0x02)
+
+/* defines for IO Unit Page 7 IOCTemperatureUnits field */
+#define MPI2_IOUNITPAGE7_IOC_TEMP_NOT_PRESENT       (0x00)
+#define MPI2_IOUNITPAGE7_IOC_TEMP_FAHRENHEIT        (0x01)
+#define MPI2_IOUNITPAGE7_IOC_TEMP_CELSIUS           (0x02)
+
+/* defines for IO Unit Page 7 IOCSpeed field */
+#define MPI2_IOUNITPAGE7_IOC_SPEED_FULL             (0x01)
+#define MPI2_IOUNITPAGE7_IOC_SPEED_HALF             (0x02)
+#define MPI2_IOUNITPAGE7_IOC_SPEED_QUARTER          (0x04)
+#define MPI2_IOUNITPAGE7_IOC_SPEED_EIGHTH           (0x08)
+
+
+
 /****************************************************************************
 *   IOC Config Pages
 ****************************************************************************/
@@ -1478,6 +1545,12 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1
 
 /* values for PhyInfo fields */
 #define MPI2_SAS_PHYINFO_PHY_VACANT                     (0x80000000)
+
+#define MPI2_SAS_PHYINFO_PHY_POWER_CONDITION_MASK       (0x18000000)
+#define MPI2_SAS_PHYINFO_PHY_POWER_ACTIVE               (0x00000000)
+#define MPI2_SAS_PHYINFO_PHY_POWER_PARTIAL              (0x08000000)
+#define MPI2_SAS_PHYINFO_PHY_POWER_SLUMBER              (0x10000000)
+
 #define MPI2_SAS_PHYINFO_CHANGED_REQ_INSIDE_ZPSDS       (0x04000000)
 #define MPI2_SAS_PHYINFO_INSIDE_ZPSDS_PERSISTENT        (0x02000000)
 #define MPI2_SAS_PHYINFO_REQ_INSIDE_ZPSDS               (0x01000000)
@@ -1690,11 +1763,11 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1
 /* values for SAS IO Unit Page 1 PortFlags */
 #define MPI2_SASIOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG                 (0x01)
 
-/* values for SAS IO Unit Page 2 PhyFlags */
+/* values for SAS IO Unit Page 1 PhyFlags */
 #define MPI2_SASIOUNIT1_PHYFLAGS_ZONING_ENABLE                      (0x10)
 #define MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE                        (0x08)
 
-/* values for SAS IO Unit Page 0 MaxMinLinkRate */
+/* values for SAS IO Unit Page 1 MaxMinLinkRate */
 #define MPI2_SASIOUNIT1_MAX_RATE_MASK                               (0xF0)
 #define MPI2_SASIOUNIT1_MAX_RATE_1_5                                (0x80)
 #define MPI2_SASIOUNIT1_MAX_RATE_3_0                                (0x90)
@@ -1753,6 +1826,74 @@ typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_4
 #define MPI2_SASIOUNIT4_PHY_SPINUP_GROUP_MASK               (0x03)
 
 
+/* SAS IO Unit Page 5 */
+
+typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS {
+    U8          ControlFlags;               /* 0x00 */
+    U8          Reserved1;                  /* 0x01 */
+    U16         InactivityTimerExponent;    /* 0x02 */
+    U8          SATAPartialTimeout;         /* 0x04 */
+    U8          Reserved2;                  /* 0x05 */
+    U8          SATASlumberTimeout;         /* 0x06 */
+    U8          Reserved3;                  /* 0x07 */
+    U8          SASPartialTimeout;          /* 0x08 */
+    U8          Reserved4;                  /* 0x09 */
+    U8          SASSlumberTimeout;          /* 0x0A */
+    U8          Reserved5;                  /* 0x0B */
+} MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS,
+  MPI2_POINTER PTR_MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS,
+  Mpi2SasIOUnit5PhyPmSettings_t, MPI2_POINTER pMpi2SasIOUnit5PhyPmSettings_t;
+
+/* defines for ControlFlags field */
+#define MPI2_SASIOUNIT5_CONTROL_SAS_SLUMBER_ENABLE      (0x08)
+#define MPI2_SASIOUNIT5_CONTROL_SAS_PARTIAL_ENABLE      (0x04)
+#define MPI2_SASIOUNIT5_CONTROL_SATA_SLUMBER_ENABLE     (0x02)
+#define MPI2_SASIOUNIT5_CONTROL_SATA_PARTIAL_ENABLE     (0x01)
+
+/* defines for InactivityTimerExponent field */
+#define MPI2_SASIOUNIT5_ITE_MASK_SAS_SLUMBER            (0x7000)
+#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_SLUMBER           (12)
+#define MPI2_SASIOUNIT5_ITE_MASK_SAS_PARTIAL            (0x0700)
+#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_PARTIAL           (8)
+#define MPI2_SASIOUNIT5_ITE_MASK_SATA_SLUMBER           (0x0070)
+#define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_SLUMBER          (4)
+#define MPI2_SASIOUNIT5_ITE_MASK_SATA_PARTIAL           (0x0007)
+#define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_PARTIAL          (0)
+
+#define MPI2_SASIOUNIT5_ITE_TEN_SECONDS                 (7)
+#define MPI2_SASIOUNIT5_ITE_ONE_SECOND                  (6)
+#define MPI2_SASIOUNIT5_ITE_HUNDRED_MILLISECONDS        (5)
+#define MPI2_SASIOUNIT5_ITE_TEN_MILLISECONDS            (4)
+#define MPI2_SASIOUNIT5_ITE_ONE_MILLISECOND             (3)
+#define MPI2_SASIOUNIT5_ITE_HUNDRED_MICROSECONDS        (2)
+#define MPI2_SASIOUNIT5_ITE_TEN_MICROSECONDS            (1)
+#define MPI2_SASIOUNIT5_ITE_ONE_MICROSECOND             (0)
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check Header.ExtPageLength or NumPhys at runtime.
+ */
+#ifndef MPI2_SAS_IOUNIT5_PHY_MAX
+#define MPI2_SAS_IOUNIT5_PHY_MAX        (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_5 {
+    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;		/* 0x00 */
+    U8                                  NumPhys;	/* 0x08 */
+    U8                                  Reserved1;	/* 0x09 */
+    U16                                 Reserved2;	/* 0x0A */
+    U32                                 Reserved3;	/* 0x0C */
+    MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS   SASPhyPowerManagementSettings
+					[MPI2_SAS_IOUNIT5_PHY_MAX];  /* 0x10 */
+} MPI2_CONFIG_PAGE_SASIOUNIT_5,
+  MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_5,
+  Mpi2SasIOUnitPage5_t, MPI2_POINTER pMpi2SasIOUnitPage5_t;
+
+#define MPI2_SASIOUNITPAGE5_PAGEVERSION     (0x00)
+
+
+
+
 /****************************************************************************
 *   SAS Expander Config Pages
 ****************************************************************************/
@@ -1935,6 +2076,8 @@ typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0
 /* see mpi2_sas.h for values for SAS Device Page 0 DeviceInfo values */
 
 /* values for SAS Device Page 0 Flags field */
+#define MPI2_SAS_DEVICE0_FLAGS_SLUMBER_PM_CAPABLE           (0x1000)
+#define MPI2_SAS_DEVICE0_FLAGS_PARTIAL_PM_CAPABLE           (0x0800)
 #define MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY     (0x0400)
 #define MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE             (0x0200)
 #define MPI2_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE           (0x0100)
@@ -2351,5 +2494,122 @@ typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAPPING_0
 #define MPI2_DRVMAP0_MAPINFO_MISSING_MASK           (0x000F)
 
 
+/****************************************************************************
+*   Ethernet Config Pages
+****************************************************************************/
+
+/* Ethernet Page 0 */
+
+/* IP address (union of IPv4 and IPv6) */
+typedef union _MPI2_ETHERNET_IP_ADDR {
+    U32     IPv4Addr;
+    U32     IPv6Addr[4];
+} MPI2_ETHERNET_IP_ADDR, MPI2_POINTER PTR_MPI2_ETHERNET_IP_ADDR,
+  Mpi2EthernetIpAddr_t, MPI2_POINTER pMpi2EthernetIpAddr_t;
+
+#define MPI2_ETHERNET_HOST_NAME_LENGTH          (32)
+
+typedef struct _MPI2_CONFIG_PAGE_ETHERNET_0 {
+    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                 /* 0x00 */
+    U8                                  NumInterfaces;          /* 0x08 */
+    U8                                  Reserved0;              /* 0x09 */
+    U16                                 Reserved1;              /* 0x0A */
+    U32                                 Status;                 /* 0x0C */
+    U8                                  MediaState;             /* 0x10 */
+    U8                                  Reserved2;              /* 0x11 */
+    U16                                 Reserved3;              /* 0x12 */
+    U8                                  MacAddress[6];          /* 0x14 */
+    U8                                  Reserved4;              /* 0x1A */
+    U8                                  Reserved5;              /* 0x1B */
+    MPI2_ETHERNET_IP_ADDR               IpAddress;              /* 0x1C */
+    MPI2_ETHERNET_IP_ADDR               SubnetMask;             /* 0x2C */
+    MPI2_ETHERNET_IP_ADDR               GatewayIpAddress;       /* 0x3C */
+    MPI2_ETHERNET_IP_ADDR               DNS1IpAddress;          /* 0x4C */
+    MPI2_ETHERNET_IP_ADDR               DNS2IpAddress;          /* 0x5C */
+    MPI2_ETHERNET_IP_ADDR               DhcpIpAddress;          /* 0x6C */
+    U8                                  HostName
+				[MPI2_ETHERNET_HOST_NAME_LENGTH];/* 0x7C */
+} MPI2_CONFIG_PAGE_ETHERNET_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_ETHERNET_0,
+  Mpi2EthernetPage0_t, MPI2_POINTER pMpi2EthernetPage0_t;
+
+#define MPI2_ETHERNETPAGE0_PAGEVERSION   (0x00)
+
+/* values for Ethernet Page 0 Status field */
+#define MPI2_ETHPG0_STATUS_IPV6_CAPABLE             (0x80000000)
+#define MPI2_ETHPG0_STATUS_IPV4_CAPABLE             (0x40000000)
+#define MPI2_ETHPG0_STATUS_CONSOLE_CONNECTED        (0x20000000)
+#define MPI2_ETHPG0_STATUS_DEFAULT_IF               (0x00000100)
+#define MPI2_ETHPG0_STATUS_FW_DWNLD_ENABLED         (0x00000080)
+#define MPI2_ETHPG0_STATUS_TELNET_ENABLED           (0x00000040)
+#define MPI2_ETHPG0_STATUS_SSH2_ENABLED             (0x00000020)
+#define MPI2_ETHPG0_STATUS_DHCP_CLIENT_ENABLED      (0x00000010)
+#define MPI2_ETHPG0_STATUS_IPV6_ENABLED             (0x00000008)
+#define MPI2_ETHPG0_STATUS_IPV4_ENABLED             (0x00000004)
+#define MPI2_ETHPG0_STATUS_IPV6_ADDRESSES           (0x00000002)
+#define MPI2_ETHPG0_STATUS_ETH_IF_ENABLED           (0x00000001)
+
+/* values for Ethernet Page 0 MediaState field */
+#define MPI2_ETHPG0_MS_DUPLEX_MASK                  (0x80)
+#define MPI2_ETHPG0_MS_HALF_DUPLEX                  (0x00)
+#define MPI2_ETHPG0_MS_FULL_DUPLEX                  (0x80)
+
+#define MPI2_ETHPG0_MS_CONNECT_SPEED_MASK           (0x07)
+#define MPI2_ETHPG0_MS_NOT_CONNECTED                (0x00)
+#define MPI2_ETHPG0_MS_10MBIT                       (0x01)
+#define MPI2_ETHPG0_MS_100MBIT                      (0x02)
+#define MPI2_ETHPG0_MS_1GBIT                        (0x03)
+
+
+/* Ethernet Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_ETHERNET_1 {
+    MPI2_CONFIG_EXTENDED_PAGE_HEADER    Header;                 /* 0x00 */
+    U32                                 Reserved0;              /* 0x08 */
+    U32                                 Flags;                  /* 0x0C */
+    U8                                  MediaState;             /* 0x10 */
+    U8                                  Reserved1;              /* 0x11 */
+    U16                                 Reserved2;              /* 0x12 */
+    U8                                  MacAddress[6];          /* 0x14 */
+    U8                                  Reserved3;              /* 0x1A */
+    U8                                  Reserved4;              /* 0x1B */
+    MPI2_ETHERNET_IP_ADDR               StaticIpAddress;        /* 0x1C */
+    MPI2_ETHERNET_IP_ADDR               StaticSubnetMask;       /* 0x2C */
+    MPI2_ETHERNET_IP_ADDR               StaticGatewayIpAddress; /* 0x3C */
+    MPI2_ETHERNET_IP_ADDR               StaticDNS1IpAddress;    /* 0x4C */
+    MPI2_ETHERNET_IP_ADDR               StaticDNS2IpAddress;    /* 0x5C */
+    U32                                 Reserved5;              /* 0x6C */
+    U32                                 Reserved6;              /* 0x70 */
+    U32                                 Reserved7;              /* 0x74 */
+    U32                                 Reserved8;              /* 0x78 */
+    U8                                  HostName
+				[MPI2_ETHERNET_HOST_NAME_LENGTH];/* 0x7C */
+} MPI2_CONFIG_PAGE_ETHERNET_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_ETHERNET_1,
+  Mpi2EthernetPage1_t, MPI2_POINTER pMpi2EthernetPage1_t;
+
+#define MPI2_ETHERNETPAGE1_PAGEVERSION   (0x00)
+
+/* values for Ethernet Page 1 Flags field */
+#define MPI2_ETHPG1_FLAG_SET_DEFAULT_IF             (0x00000100)
+#define MPI2_ETHPG1_FLAG_ENABLE_FW_DOWNLOAD         (0x00000080)
+#define MPI2_ETHPG1_FLAG_ENABLE_TELNET              (0x00000040)
+#define MPI2_ETHPG1_FLAG_ENABLE_SSH2                (0x00000020)
+#define MPI2_ETHPG1_FLAG_ENABLE_DHCP_CLIENT         (0x00000010)
+#define MPI2_ETHPG1_FLAG_ENABLE_IPV6                (0x00000008)
+#define MPI2_ETHPG1_FLAG_ENABLE_IPV4                (0x00000004)
+#define MPI2_ETHPG1_FLAG_USE_IPV6_ADDRESSES         (0x00000002)
+#define MPI2_ETHPG1_FLAG_ENABLE_ETH_IF              (0x00000001)
+
+/* values for Ethernet Page 1 MediaState field */
+#define MPI2_ETHPG1_MS_DUPLEX_MASK                  (0x80)
+#define MPI2_ETHPG1_MS_HALF_DUPLEX                  (0x00)
+#define MPI2_ETHPG1_MS_FULL_DUPLEX                  (0x80)
+
+#define MPI2_ETHPG1_MS_DATA_RATE_MASK               (0x07)
+#define MPI2_ETHPG1_MS_DATA_RATE_AUTO               (0x00)
+#define MPI2_ETHPG1_MS_DATA_RATE_10MBIT             (0x01)
+#define MPI2_ETHPG1_MS_DATA_RATE_100MBIT            (0x02)
+#define MPI2_ETHPG1_MS_DATA_RATE_1GBIT              (0x03)
+
+
 #endif