diff options
| author | Eric Moore <eric.moore@lsi.com> | 2009-03-09 01:21:12 -0600 |
|---|---|---|
| committer | James Bottomley <James.Bottomley@HansenPartnership.com> | 2009-03-13 16:08:49 -0500 |
| commit | 635374e7eb110e80d9918b8611198edd56a32975 (patch) | |
| tree | 1c96f9dac921b0b26ee4e93ecd9c79a96fbc7ba6 /drivers/scsi/mpt2sas/mpi | |
| parent | dec3f95959bff957f5bcbf16c2a2823f7e33d1e7 (diff) | |
[SCSI] mpt2sas v00.100.11.15
* This is new scsi lld device driver from LSI supporting the SAS 2.0
standard. I have split patchs by filename.
* Here is list of new 6gb host controllers:
LSI SAS2004
LSI SAS2008
LSI SAS2108
LSI SAS2116
* Here are the changes in the 4th posting of this patch set:
(1) fix compile errors when SCSI_MPT2SAS_LOGGING is not enabled
(2) add mpt2sas to the SCSI Mid Layer Makefile
(3) append mpt2sas_ to the naming of all non-static functions
(4) fix oops for SMP_PASSTHRU
(5) doorbell algorithm imported changes from windows driver
* Here are the changes in the 3rd posting of this patch set:
(1) add readl following writel from the function that disables interrupts
(2) replace 0xFFFFFFFFFFFFFFFFULL with ~0ULL
(3) when calling pci_enable_msix, only pass one msix entry (instead of 15).
(4) remove the "current HW implementation uses..... " comment in the sources
(5) merged bug fix for SIGIO/POLLIN notifcation; reported by the storlib team.
* Here are the changes in the 2nd posting of this patch set:
(1) use little endian types in the mpi headers
(2) merged in bug fix's from inhouse drivers.
Signed-off-by: Eric Moore <eric.moore@lsi.com>
Tested-by: peter Bogdanovic <pbog@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Diffstat (limited to 'drivers/scsi/mpt2sas/mpi')
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2.h | 1067 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h | 2151 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_init.h | 420 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_ioc.h | 1295 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_raid.h | 295 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_sas.h | 282 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_tool.h | 249 | ||||
| -rw-r--r-- | drivers/scsi/mpt2sas/mpi/mpi2_type.h | 61 |
8 files changed, 5820 insertions, 0 deletions
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2.h b/drivers/scsi/mpt2sas/mpi/mpi2.h new file mode 100644 index 00000000000..7bb2ece8b2e --- /dev/null +++ b/drivers/scsi/mpt2sas/mpi/mpi2.h @@ -0,0 +1,1067 @@ +/* + * Copyright (c) 2000-2009 LSI Corporation. + * + * + * Name: mpi2.h + * Title: MPI Message independent structures and definitions + * including System Interface Register Set and + * scatter/gather formats. + * Creation Date: June 21, 2006 + * + * mpi2.h Version: 02.00.11 + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 06-04-07 02.00.01 Bumped MPI2_HEADER_VERSION_UNIT. + * 06-26-07 02.00.02 Bumped MPI2_HEADER_VERSION_UNIT. + * 08-31-07 02.00.03 Bumped MPI2_HEADER_VERSION_UNIT. + * Moved ReplyPostHostIndex register to offset 0x6C of the + * MPI2_SYSTEM_INTERFACE_REGS and modified the define for + * MPI2_REPLY_POST_HOST_INDEX_OFFSET. + * Added union of request descriptors. + * Added union of reply descriptors. + * 10-31-07 02.00.04 Bumped MPI2_HEADER_VERSION_UNIT. + * Added define for MPI2_VERSION_02_00. + * Fixed the size of the FunctionDependent5 field in the + * MPI2_DEFAULT_REPLY structure. + * 12-18-07 02.00.05 Bumped MPI2_HEADER_VERSION_UNIT. + * Removed the MPI-defined Fault Codes and extended the + * product specific codes up to 0xEFFF. + * Added a sixth key value for the WriteSequence register + * and changed the flush value to 0x0. + * Added message function codes for Diagnostic Buffer Post + * and Diagnsotic Release. + * New IOCStatus define: MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED + * Moved MPI2_VERSION_UNION from mpi2_ioc.h. + * 02-29-08 02.00.06 Bumped MPI2_HEADER_VERSION_UNIT. + * 03-03-08 02.00.07 Bumped MPI2_HEADER_VERSION_UNIT. + * 05-21-08 02.00.08 Bumped MPI2_HEADER_VERSION_UNIT. + * Added #defines for marking a reply descriptor as unused. + * 06-27-08 02.00.09 Bumped MPI2_HEADER_VERSION_UNIT. + * 10-02-08 02.00.10 Bumped MPI2_HEADER_VERSION_UNIT. + * Moved LUN field defines from mpi2_init.h. + * 01-19-09 02.00.11 Bumped MPI2_HEADER_VERSION_UNIT. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_H +#define MPI2_H + + +/***************************************************************************** +* +* MPI Version Definitions +* +*****************************************************************************/ + +#define MPI2_VERSION_MAJOR (0x02) +#define MPI2_VERSION_MINOR (0x00) +#define MPI2_VERSION_MAJOR_MASK (0xFF00) +#define MPI2_VERSION_MAJOR_SHIFT (8) +#define MPI2_VERSION_MINOR_MASK (0x00FF) +#define MPI2_VERSION_MINOR_SHIFT (0) +#define MPI2_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) | \ + MPI2_VERSION_MINOR) + +#define MPI2_VERSION_02_00 (0x0200) + +/* versioning for this MPI header set */ +#define MPI2_HEADER_VERSION_UNIT (0x0B) +#define MPI2_HEADER_VERSION_DEV (0x00) +#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00) +#define MPI2_HEADER_VERSION_UNIT_SHIFT (8) +#define MPI2_HEADER_VERSION_DEV_MASK (0x00FF) +#define MPI2_HEADER_VERSION_DEV_SHIFT (0) +#define MPI2_HEADER_VERSION ((MPI2_HEADER_VERSION_UNIT << 8) | MPI2_HEADER_VERSION_DEV) + + +/***************************************************************************** +* +* IOC State Definitions +* +*****************************************************************************/ + +#define MPI2_IOC_STATE_RESET (0x00000000) +#define MPI2_IOC_STATE_READY (0x10000000) +#define MPI2_IOC_STATE_OPERATIONAL (0x20000000) +#define MPI2_IOC_STATE_FAULT (0x40000000) + +#define MPI2_IOC_STATE_MASK (0xF0000000) +#define MPI2_IOC_STATE_SHIFT (28) + +/* Fault state range for prodcut specific codes */ +#define MPI2_FAULT_PRODUCT_SPECIFIC_MIN (0x0000) +#define MPI2_FAULT_PRODUCT_SPECIFIC_MAX (0xEFFF) + + +/***************************************************************************** +* +* System Interface Register Definitions +* +*****************************************************************************/ + +typedef volatile struct _MPI2_SYSTEM_INTERFACE_REGS +{ + U32 Doorbell; /* 0x00 */ + U32 WriteSequence; /* 0x04 */ + U32 HostDiagnostic; /* 0x08 */ + U32 Reserved1; /* 0x0C */ + U32 DiagRWData; /* 0x10 */ + U32 DiagRWAddressLow; /* 0x14 */ + U32 DiagRWAddressHigh; /* 0x18 */ + U32 Reserved2[5]; /* 0x1C */ + U32 HostInterruptStatus; /* 0x30 */ + U32 HostInterruptMask; /* 0x34 */ + U32 DCRData; /* 0x38 */ + U32 DCRAddress; /* 0x3C */ + U32 Reserved3[2]; /* 0x40 */ + U32 ReplyFreeHostIndex; /* 0x48 */ + U32 Reserved4[8]; /* 0x4C */ + U32 ReplyPostHostIndex; /* 0x6C */ + U32 Reserved5; /* 0x70 */ + U32 HCBSize; /* 0x74 */ + U32 HCBAddressLow; /* 0x78 */ + U32 HCBAddressHigh; /* 0x7C */ + U32 Reserved6[16]; /* 0x80 */ + U32 RequestDescriptorPostLow; /* 0xC0 */ + U32 RequestDescriptorPostHigh; /* 0xC4 */ + U32 Reserved7[14]; /* 0xC8 */ +} MPI2_SYSTEM_INTERFACE_REGS, MPI2_POINTER PTR_MPI2_SYSTEM_INTERFACE_REGS, + Mpi2SystemInterfaceRegs_t, MPI2_POINTER pMpi2SystemInterfaceRegs_t; + +/* + * Defines for working with the Doorbell register. + */ +#define MPI2_DOORBELL_OFFSET (0x00000000) + +/* IOC --> System values */ +#define MPI2_DOORBELL_USED (0x08000000) +#define MPI2_DOORBELL_WHO_INIT_MASK (0x07000000) +#define MPI2_DOORBELL_WHO_INIT_SHIFT (24) +#define MPI2_DOORBELL_FAULT_CODE_MASK (0x0000FFFF) +#define MPI2_DOORBELL_DATA_MASK (0x0000FFFF) + +/* System --> IOC values */ +#define MPI2_DOORBELL_FUNCTION_MASK (0xFF000000) +#define MPI2_DOORBELL_FUNCTION_SHIFT (24) +#define MPI2_DOORBELL_ADD_DWORDS_MASK (0x00FF0000) +#define MPI2_DOORBELL_ADD_DWORDS_SHIFT (16) + + +/* + * Defines for the WriteSequence register + */ +#define MPI2_WRITE_SEQUENCE_OFFSET (0x00000004) +#define MPI2_WRSEQ_KEY_VALUE_MASK (0x0000000F) +#define MPI2_WRSEQ_FLUSH_KEY_VALUE (0x0) +#define MPI2_WRSEQ_1ST_KEY_VALUE (0xF) +#define MPI2_WRSEQ_2ND_KEY_VALUE (0x4) +#define MPI2_WRSEQ_3RD_KEY_VALUE (0xB) +#define MPI2_WRSEQ_4TH_KEY_VALUE (0x2) +#define MPI2_WRSEQ_5TH_KEY_VALUE (0x7) +#define MPI2_WRSEQ_6TH_KEY_VALUE (0xD) + +/* + * Defines for the HostDiagnostic register + */ +#define MPI2_HOST_DIAGNOSTIC_OFFSET (0x00000008) + +#define MPI2_DIAG_BOOT_DEVICE_SELECT_MASK (0x00001800) +#define MPI2_DIAG_BOOT_DEVICE_SELECT_DEFAULT (0x00000000) +#define MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW (0x00000800) + +#define MPI2_DIAG_CLEAR_FLASH_BAD_SIG (0x00000400) +#define MPI2_DIAG_FORCE_HCB_ON_RESET (0x00000200) +#define MPI2_DIAG_HCB_MODE (0x00000100) +#define MPI2_DIAG_DIAG_WRITE_ENABLE (0x00000080) +#define MPI2_DIAG_FLASH_BAD_SIG (0x00000040) +#define MPI2_DIAG_RESET_HISTORY (0x00000020) +#define MPI2_DIAG_DIAG_RW_ENABLE (0x00000010) +#define MPI2_DIAG_RESET_ADAPTER (0x00000004) +#define MPI2_DIAG_HOLD_IOC_RESET (0x00000002) + +/* + * Offsets for DiagRWData and address + */ +#define MPI2_DIAG_RW_DATA_OFFSET (0x00000010) +#define MPI2_DIAG_RW_ADDRESS_LOW_OFFSET (0x00000014) +#define MPI2_DIAG_RW_ADDRESS_HIGH_OFFSET (0x00000018) + +/* + * Defines for the HostInterruptStatus register + */ +#define MPI2_HOST_INTERRUPT_STATUS_OFFSET (0x00000030) +#define MPI2_HIS_SYS2IOC_DB_STATUS (0x80000000) +#define MPI2_HIS_IOP_DOORBELL_STATUS MPI2_HIS_SYS2IOC_DB_STATUS +#define MPI2_HIS_RESET_IRQ_STATUS (0x40000000) +#define MPI2_HIS_REPLY_DESCRIPTOR_INTERRUPT (0x00000008) +#define MPI2_HIS_IOC2SYS_DB_STATUS (0x00000001) +#define MPI2_HIS_DOORBELL_INTERRUPT MPI2_HIS_IOC2SYS_DB_STATUS + +/* + * Defines for the HostInterruptMask register + */ +#define MPI2_HOST_INTERRUPT_MASK_OFFSET (0x00000034) +#define MPI2_HIM_RESET_IRQ_MASK (0x40000000) +#define MPI2_HIM_REPLY_INT_MASK (0x00000008) +#define MPI2_HIM_RIM MPI2_HIM_REPLY_INT_MASK +#define MPI2_HIM_IOC2SYS_DB_MASK (0x00000001) +#define MPI2_HIM_DIM MPI2_HIM_IOC2SYS_DB_MASK + +/* + * Offsets for DCRData and address + */ +#define MPI2_DCR_DATA_OFFSET (0x00000038) +#define MPI2_DCR_ADDRESS_OFFSET (0x0000003C) + +/* + * Offset for the Reply Free Queue + */ +#define MPI2_REPLY_FREE_HOST_INDEX_OFFSET (0x00000048) + +/* + * Offset for the Reply Descriptor Post Queue + */ +#define MPI2_REPLY_POST_HOST_INDEX_OFFSET (0x0000006C) + +/* + * Defines for the HCBSize and address + */ +#define MPI2_HCB_SIZE_OFFSET (0x00000074) +#define MPI2_HCB_SIZE_SIZE_MASK (0xFFFFF000) +#define MPI2_HCB_SIZE_HCB_ENABLE (0x00000001) + +#define MPI2_HCB_ADDRESS_LOW_OFFSET (0x00000078) +#define MPI2_HCB_ADDRESS_HIGH_OFFSET (0x0000007C) + +/* + * Offsets for the Request Queue + */ +#define MPI2_REQUEST_DESCRIPTOR_POST_LOW_OFFSET (0x000000C0) +#define MPI2_REQUEST_DESCRIPTOR_POST_HIGH_OFFSET (0x000000C4) + + +/***************************************************************************** +* +* Message Descriptors +* +*****************************************************************************/ + +/* Request Descriptors */ + +/* Default Request Descriptor */ +typedef struct _MPI2_DEFAULT_REQUEST_DESCRIPTOR +{ + U8 RequestFlags; /* 0x00 */ + U8 VF_ID; /* 0x01 */ + U16 SMID; /* 0x02 */ + U16 LMID; /* 0x04 */ + U16 DescriptorTypeDependent; /* 0x06 */ +} MPI2_DEFAULT_REQUEST_DESCRIPTOR, + MPI2_POINTER PTR_MPI2_DEFAULT_REQUEST_DESCRIPTOR, + Mpi2DefaultRequestDescriptor_t, MPI2_POINTER pMpi2DefaultRequestDescriptor_t; + +/* defines for the RequestFlags field */ +#define MPI2_REQ_DESCRIPT_FLAGS_TYPE_MASK (0x0E) +#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO (0x00) +#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET (0x02) +#define MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY (0x06) +#define MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE (0x08) + +#define MPI2_REQ_DESCRIPT_FLAGS_IOC_FIFO_MARKER (0x01) + + +/* High Priority Request Descriptor */ +typedef struct _MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR +{ + U8 RequestFlags; /* 0x00 */ + U8 VF_ID; /* 0x01 */ + U16 SMID; /* 0x02 */ + U16 LMID; /* 0x04 */ + U16 Reserved1; /* 0x06 */ +} MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR, + MPI2_POINTER PTR_MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR, + Mpi2HighPriorityRequestDescriptor_t, + MPI2_POINTER pMpi2HighPriorityRequestDescriptor_t; + + +/* SCSI IO Request Descriptor */ +typedef struct _MPI2_SCSI_IO_REQUEST_DESCRIPTOR +{ + U8 RequestFlags; /* 0x00 */ + U8 VF_ID; /* 0x01 */ + U16 SMID; /* 0x02 */ + U16 LMID; /* 0x04 */ + U16 DevHandle; /* 0x06 */ +} MPI2_SCSI_IO_REQUEST_DESCRIPTOR, + MPI2_POINTER PTR_MPI2_SCSI_IO_REQUEST_DESCRIPTOR, + Mpi2SCSIIORequestDescriptor_t, MPI2_POINTER pMpi2SCSIIORequestDescriptor_t; + + +/* SCSI Target Request Descriptor */ +typedef struct _MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR +{ + U8 RequestFlags; /* 0x00 */ + U8 VF_ID; /* 0x01 */ + U16 SMID; /* 0x02 */ + U16 LMID; /* 0x04 */ + U16 IoIndex; /* 0x06 */ +} MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR, + MPI2_POINTER PTR_MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR, + Mpi2SCSITargetRequestDescriptor_t, + MPI2_POINTER pMpi2SCSITargetRequestDescriptor_t; + +/* union of Request Descriptors */ +typedef union _MPI2_REQUEST_DESCRIPTOR_UNION +{ + MPI2_DEFAULT_REQUEST_DESCRIPTOR Default; + MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR HighPriority; + MPI2_SCSI_IO_REQUEST_DESCRIPTOR SCSIIO; + MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR SCSITarget; + U64 Words; +} MPI2_REQUEST_DESCRIPTOR_UNION, MPI2_POINTER PTR_MPI2_REQUEST_DESCRIPTOR_UNION, + Mpi2RequestDescriptorUnion_t, MPI2_POINTER pMpi2RequestDescriptorUnion_t; + + +/* Reply Descriptors */ + +/* Default Reply Descriptor */ +typedef struct _MPI2_DEFAULT_REPLY_DESCRIPTOR +{ + U8 ReplyFlags; /* 0x00 */ + U8 VF_ID; /* 0x01 */ + U16 DescriptorTypeDependent1; /* 0x02 */ + U32 DescriptorTypeDependent2; /* 0x04 */ +} MPI2_DEFAULT_REPLY_DESCRIPTOR, MPI2_POINTER PTR_MPI2_DEFAULT_REPLY_DESCRIPTOR, + Mpi2DefaultReplyDescriptor_t, MPI2_POINTER pMpi2DefaultReplyDescriptor_t; + +/* defines for the ReplyFlags field */ +#define MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK (0x0F) +#define MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS (0x00) +#define MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY (0x01) +#define MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS (0x02) +#define MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER (0x03) +#define MPI2_RPY_DESCRIPT_FLAGS_UNUSED (0x0F) + +/* values for marking a reply descriptor as unused */ +#define MPI2_RPY_DESCRIPT_UNUSED_WORD0_MARK (0xFFFFFFFF) +#define MPI2_RPY_DESCRIPT_UNUSED_WORD1_MARK (0xFFFFFFFF) + +/* Address Reply Descriptor */ +typedef struct _MPI2_ADDRESS_REPLY_DESCRIPTOR +{ + U8 ReplyFlags; /* 0x00 */ + U8 VF_ID; /* 0x01 */ + U16 SMID; /* 0x02 */ + U32 ReplyFrameAddress; /* 0x04 */ +} MPI2_ADDRESS_REPLY_DESCRIPTOR, MPI2_POINTER PTR_MPI2_ADDRESS_REPLY_DESCRIPTOR, + Mpi2AddressReplyDescriptor_t, MPI2_POINTER pMpi2AddressReplyDescriptor_t; + +#define MPI2_ADDRESS_REPLY_SMID_INVALID (0x00) + + +/* SCSI IO Success Reply Descriptor */ +typedef struct _MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR +{ + U8 ReplyFlags; /* 0x00 */ + U8 VF_ID; /* 0x01 */ + U16 SMID; /* 0x02 */ + U16 TaskTag; /* 0x04 */ + U16 DevHandle; /* 0x06 */ +} MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR, + MPI2_POINTER PTR_MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR, + Mpi2SCSIIOSuccessReplyDescriptor_t, + MPI2_POINTER pMpi2SCSIIOSuccessReplyDescriptor_t; + + +/* TargetAssist Success Reply Descriptor */ +typedef struct _MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR +{ + U8 ReplyFlags; /* 0x00 */ + U8 VF_ID; /* 0x01 */ + U16 SMID; /* 0x02 */ + U8 SequenceNumber; /* 0x04 */ + U8 Reserved1; /* 0x05 */ + U16 IoIndex; /* 0x06 */ +} MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR, + MPI2_POINTER PTR_MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR, + Mpi2TargetAssistSuccessReplyDescriptor_t, + MPI2_POINTER pMpi2TargetAssistSuccessReplyDescriptor_t; + + +/* Target Command Buffer Reply Descriptor */ +typedef struct _MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR +{ + U8 ReplyFlags; /* 0x00 */ + U8 VF_ID; /* 0x01 */ + U8 VP_ID; /* 0x02 */ + U8 Flags; /* 0x03 */ + U16 InitiatorDevHandle; /* 0x04 */ + U16 IoIndex; /* 0x06 */ +} MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR, + MPI2_POINTER PTR_MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR, + Mpi2TargetCommandBufferReplyDescriptor_t, + MPI2_POINTER pMpi2TargetCommandBufferReplyDescriptor_t; + +/* defines for Flags field */ +#define MPI2_RPY_DESCRIPT_TCB_FLAGS_PHYNUM_MASK (0x3F) + + +/* union of Reply Descriptors */ +typedef union _MPI2_REPLY_DESCRIPTORS_UNION +{ + MPI2_DEFAULT_REPLY_DESCRIPTOR Default; + MPI2_ADDRESS_REPLY_DESCRIPTOR AddressReply; + MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR SCSIIOSuccess; + MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR TargetAssistSuccess; + MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR TargetCommandBuffer; + U64 Words; +} MPI2_REPLY_DESCRIPTORS_UNION, MPI2_POINTER PTR_MPI2_REPLY_DESCRIPTORS_UNION, + Mpi2ReplyDescriptorsUnion_t, MPI2_POINTER pMpi2ReplyDescriptorsUnion_t; + + + +/***************************************************************************** +* +* Message Functions +* 0x80 -> 0x8F reserved for private message use per product +* +* +*****************************************************************************/ + +#define MPI2_FUNCTION_SCSI_IO_REQUEST (0x00) /* SCSI IO */ +#define MPI2_FUNCTION_SCSI_TASK_MGMT (0x01) /* SCSI Task Management */ +#define MPI2_FUNCTION_IOC_INIT (0x02) /* IOC Init */ +#define MPI2_FUNCTION_IOC_FACTS (0x03) /* IOC Facts */ +#define MPI2_FUNCTION_CONFIG (0x04) /* Configuration */ +#define MPI2_FUNCTION_PORT_FACTS (0x05) /* Port Facts */ +#define MPI2_FUNCTION_PORT_ENABLE (0x06) /* Port Enable */ +#define MPI2_FUNCTION_EVENT_NOTIFICATION (0x07) /* Event Notification */ +#define MPI2_FUNCTION_EVENT_ACK (0x08) /* Event Acknowledge */ +#define MPI2_FUNCTION_FW_DOWNLOAD (0x09) /* FW Download */ +#define MPI2_FUNCTION_TARGET_ASSIST (0x0B) /* Target Assist */ +#define MPI2_FUNCTION_TARGET_STATUS_SEND (0x0C) /* Target Status Send */ +#define MPI2_FUNCTION_TARGET_MODE_ABORT (0x0D) /* Target Mode Abort */ +#define MPI2_FUNCTION_FW_UPLOAD (0x12) /* FW Upload */ +#define MPI2_FUNCTION_RAID_ACTION (0x15) /* RAID Action */ +#define MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH (0x16) /* SCSI IO RAID Passthrough */ +#define MPI2_FUNCTION_TOOLBOX (0x17) /* Toolbox */ +#define MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR (0x18) /* SCSI Enclosure Processor */ +#define MPI2_FUNCTION_SMP_PASSTHROUGH (0x1A) /* SMP Passthrough */ +#define MPI2_FUNCTION_SAS_IO_UNIT_CONTROL (0x1B) /* SAS IO Unit Control */ +#define MPI2_FUNCTION_SATA_PASSTHROUGH (0x1C) /* SATA Passthrough */ +#define MPI2_FUNCTION_DIAG_BUFFER_POST (0x1D) /* Diagnostic Buffer Post */ +#define MPI2_FUNCTION_DIAG_RELEASE (0x1E) /* Diagnostic Release */ +#define MPI2_FUNCTION_TARGET_CMD_BUF_BASE_POST (0x24) /* Target Command Buffer Post Base */ +#define MPI2_FUNCTION_TARGET_CMD_BUF_LIST_POST (0x25) /* Target Command Buffer Post List */ + + + +/* Doorbell functions */ +#define MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET (0x40) +/* #define MPI2_FUNCTION_IO_UNIT_RESET (0x41) */ +#define MPI2_FUNCTION_HANDSHAKE (0x42) + + +/***************************************************************************** +* +* IOC Status Values +* +*****************************************************************************/ + +/* mask for IOCStatus status value */ +#define MPI2_IOCSTATUS_MASK (0x7FFF) + +/**************************************************************************** +* Common IOCStatus values for all replies +****************************************************************************/ + +#define MPI2_IOCSTATUS_SUCCESS (0x0000) +#define MPI2_IOCSTATUS_INVALID_FUNCTION (0x0001) +#define MPI2_IOCSTATUS_BUSY (0x0002) +#define MPI2_IOCSTATUS_INVALID_SGL (0x0003) +#define MPI2_IOCSTATUS_INTERNAL_ERROR (0x0004) +#define MPI2_IOCSTATUS_INVALID_VPID (0x0005) +#define MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES (0x0006) +#define MPI2_IOCSTATUS_INVALID_FIELD (0x0007) +#define MPI2_IOCSTATUS_INVALID_STATE (0x0008) +#define MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED (0x0009) + +/**************************************************************************** +* Config IOCStatus values +****************************************************************************/ + +#define MPI2_IOCSTATUS_CONFIG_INVALID_ACTION (0x0020) +#define MPI2_IOCSTATUS_CONFIG_INVALID_TYPE (0x0021) +#define MPI2_IOCSTATUS_CONFIG_INVALID_PAGE (0x0022) +#define MPI2_IOCSTATUS_CONFIG_INVALID_DATA (0x0023) +#define MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS (0x0024) +#define MPI2_IOCSTATUS_CONFIG_CANT_COMMIT (0x0025) + +/**************************************************************************** +* SCSI IO Reply +****************************************************************************/ + +#define MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR (0x0040) +#define MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE (0x0042) +#define MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE (0x0043) +#define MPI2_IOCSTATUS_SCSI_DATA_OVERRUN (0x0044) +#define MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN (0x0045) +#define MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR (0x0046) +#define MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR (0x0047) +#define MPI2_IOCSTATUS_SCSI_TASK_TERMINATED (0x0048) +#define MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH (0x0049) +#define MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED (0x004A) +#define MPI2_IOCSTATUS_SCSI_IOC_TERMINATED (0x004B) +#define MPI2_IOCSTATUS_SCSI_EXT_TERMINATED (0x004C) + +/**************************************************************************** +* For use by SCSI Initiator and SCSI Target end-to-end data protection +****************************************************************************/ + +#define MPI2_IOCSTATUS_EEDP_GUARD_ERROR (0x004D) +#define MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR (0x004E) +#define MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR (0x004F) + +/**************************************************************************** +* SCSI Target values +****************************************************************************/ + +#define MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX (0x0062) +#define MPI2_IOCSTATUS_TARGET_ABORTED (0x0063) +#define MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE (0x0064) +#define MPI2_IOCSTATUS_TARGET_NO_CONNECTION (0x0065) +#define MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH (0x006A) +#define MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR (0x006D) +#define MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA (0x006E) +#define MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT (0x006F) +#define MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT (0x0070) +#define MPI2_IOCSTATUS_TARGET_NAK_RECEIVED (0x0071) + +/**************************************************************************** +* Serial Attached SCSI values +****************************************************************************/ + +#define MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED (0x0090) +#define MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN (0x0091) + +/**************************************************************************** +* Diagnostic Buffer Post / Diagnostic Release values +****************************************************************************/ + +#define MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED (0x00A0) + + +/**************************************************************************** +* IOCStatus flag to indicate that log info is available +****************************************************************************/ + +#define MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE (0x8000) + +/**************************************************************************** +* IOCLogInfo Types +****************************************************************************/ + +#define MPI2_IOCLOGINFO_TYPE_MASK (0xF0000000) +#define MPI2_IOCLOGINFO_TYPE_SHIFT (28) +#define MPI2_IOCLOGINFO_TYPE_NONE (0x0) +#define MPI2_IOCLOGINFO_TYPE_SCSI (0x1) +#define MPI2_IOCLOGINFO_TYPE_FC (0x2) +#define MPI2_IOCLOGINFO_TYPE_SAS (0x3) +#define MPI2_IOCLOGINFO_TYPE_ISCSI (0x4) +#define MPI2_IOCLOGINFO_LOG_DATA_MASK (0x0FFFFFFF) + + +/***************************************************************************** +* +* Standard Message Structures +* +*****************************************************************************/ + +/**************************************************************************** +* Request Message Header for all request messages +****************************************************************************/ + +typedef struct _MPI2_REQUEST_HEADER +{ + U16 FunctionDependent1; /* 0x00 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 FunctionDependent2; /* 0x04 */ + U8 FunctionDependent3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved1; /* 0x0A */ +} MPI2_REQUEST_HEADER, MPI2_POINTER PTR_MPI2_REQUEST_HEADER, + MPI2RequestHeader_t, MPI2_POINTER pMPI2RequestHeader_t; + + +/**************************************************************************** +* Default Reply +****************************************************************************/ + +typedef struct _MPI2_DEFAULT_REPLY +{ + U16 FunctionDependent1; /* 0x00 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 FunctionDependent2; /* 0x04 */ + U8 FunctionDependent3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved1; /* 0x0A */ + U16 FunctionDependent5; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ +} MPI2_DEFAULT_REPLY, MPI2_POINTER PTR_MPI2_DEFAULT_REPLY, + MPI2DefaultReply_t, MPI2_POINTER pMPI2DefaultReply_t; + + +/* common version structure/union used in messages and configuration pages */ + +typedef struct _MPI2_VERSION_STRUCT +{ + U8 Dev; /* 0x00 */ + U8 Unit; /* 0x01 */ + U8 Minor; /* 0x02 */ + U8 Major; /* 0x03 */ +} MPI2_VERSION_STRUCT; + +typedef union _MPI2_VERSION_UNION +{ + MPI2_VERSION_STRUCT Struct; + U32 Word; +} MPI2_VERSION_UNION; + + +/* LUN field defines, common to many structures */ +#define MPI2_LUN_FIRST_LEVEL_ADDRESSING (0x0000FFFF) +#define MPI2_LUN_SECOND_LEVEL_ADDRESSING (0xFFFF0000) +#define MPI2_LUN_THIRD_LEVEL_ADDRESSING (0x0000FFFF) +#define MPI2_LUN_FOURTH_LEVEL_ADDRESSING (0xFFFF0000) +#define MPI2_LUN_LEVEL_1_WORD (0xFF00) +#define MPI2_LUN_LEVEL_1_DWORD (0x0000FF00) + + +/***************************************************************************** +* +* Fusion-MPT MPI Scatter Gather Elements +* +*****************************************************************************/ + +/**************************************************************************** +* MPI Simple Element structures +****************************************************************************/ + +typedef struct _MPI2_SGE_SIMPLE32 +{ + U32 FlagsLength; + U32 Address; +} MPI2_SGE_SIMPLE32, MPI2_POINTER PTR_MPI2_SGE_SIMPLE32, + Mpi2SGESimple32_t, MPI2_POINTER pMpi2SGESimple32_t; + +typedef struct _MPI2_SGE_SIMPLE64 +{ + U32 FlagsLength; + U64 Address; +} MPI2_SGE_SIMPLE64, MPI2_POINTER PTR_MPI2_SGE_SIMPLE64, + Mpi2SGESimple64_t, MPI2_POINTER pMpi2SGESimple64_t; + +typedef struct _MPI2_SGE_SIMPLE_UNION +{ + U32 FlagsLength; + union + { + U32 Address32; + U64 Address64; + } u; +} MPI2_SGE_SIMPLE_UNION, MPI2_POINTER PTR_MPI2_SGE_SIMPLE_UNION, + Mpi2SGESimpleUnion_t, MPI2_POINTER pMpi2SGESimpleUnion_t; + + +/**************************************************************************** +* MPI Chain Element structures +****************************************************************************/ + +typedef struct _MPI2_SGE_CHAIN32 +{ + U16 Length; + U8 NextChainOffset; + U8 Flags; + U32 Address; +} MPI2_SGE_CHAIN32, MPI2_POINTER PTR_MPI2_SGE_CHAIN32, + Mpi2SGEChain32_t, MPI2_POINTER pMpi2SGEChain32_t; + +typedef struct _MPI2_SGE_CHAIN64 +{ + U16 Length; + U8 NextChainOffset; + U8 Flags; + U64 Address; +} MPI2_SGE_CHAIN64, MPI2_POINTER PTR_MPI2_SGE_CHAIN64, + Mpi2SGEChain64_t, MPI2_POINTER pMpi2SGEChain64_t; + +typedef struct _MPI2_SGE_CHAIN_UNION +{ + U16 Length; + U8 NextChainOffset; + U8 Flags; + union + { + U32 Address32; + U64 Address64; + } u; +} MPI2_SGE_CHAIN_UNION, MPI2_POINTER PTR_MPI2_SGE_CHAIN_UNION, + Mpi2SGEChainUnion_t, MPI2_POINTER pMpi2SGEChainUnion_t; + + +/**************************************************************************** +* MPI Transaction Context Element structures +****************************************************************************/ + +typedef struct _MPI2_SGE_TRANSACTION32 +{ + U8 Reserved; + U8 ContextSize; + U8 DetailsLength; + U8 Flags; + U32 TransactionContext[1]; + U32 TransactionDetails[1]; +} MPI2_SGE_TRANSACTION32, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION32, + Mpi2SGETransaction32_t, MPI2_POINTER pMpi2SGETransaction32_t; + +typedef struct _MPI2_SGE_TRANSACTION64 +{ + U8 Reserved; + U8 ContextSize; + U8 DetailsLength; + U8 Flags; + U32 TransactionContext[2]; + U32 TransactionDetails[1]; +} MPI2_SGE_TRANSACTION64, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION64, + Mpi2SGETransaction64_t, MPI2_POINTER pMpi2SGETransaction64_t; + +typedef struct _MPI2_SGE_TRANSACTION96 +{ + U8 Reserved; + U8 ContextSize; + U8 DetailsLength; + U8 Flags; + U32 TransactionContext[3]; + U32 TransactionDetails[1]; +} MPI2_SGE_TRANSACTION96, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION96, + Mpi2SGETransaction96_t, MPI2_POINTER pMpi2SGETransaction96_t; + +typedef struct _MPI2_SGE_TRANSACTION128 +{ + U8 Reserved; + U8 ContextSize; + U8 DetailsLength; + U8 Flags; + U32 TransactionContext[4]; + U32 TransactionDetails[1]; +} MPI2_SGE_TRANSACTION128, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION128, + Mpi2SGETransaction_t128, MPI2_POINTER pMpi2SGETransaction_t128; + +typedef struct _MPI2_SGE_TRANSACTION_UNION +{ + U8 Reserved; + U8 ContextSize; + U8 DetailsLength; + U8 Flags; + union + { + U32 TransactionContext32[1]; + U32 TransactionContext64[2]; + U32 TransactionContext96[3]; + U32 TransactionContext128[4]; + } u; + U32 TransactionDetails[1]; +} MPI2_SGE_TRANSACTION_UNION, MPI2_POINTER PTR_MPI2_SGE_TRANSACTION_UNION, + Mpi2SGETransactionUnion_t, MPI2_POINTER pMpi2SGETransactionUnion_t; + + +/**************************************************************************** +* MPI SGE union for IO SGL's +****************************************************************************/ + +typedef struct _MPI2_MPI_SGE_IO_UNION +{ + union + { + MPI2_SGE_SIMPLE_UNION Simple; + MPI2_SGE_CHAIN_UNION Chain; + } u; +} MPI2_MPI_SGE_IO_UNION, MPI2_POINTER PTR_MPI2_MPI_SGE_IO_UNION, + Mpi2MpiSGEIOUnion_t, MPI2_POINTER pMpi2MpiSGEIOUnion_t; + + +/**************************************************************************** +* MPI SGE union for SGL's with Simple and Transaction elements +****************************************************************************/ + +typedef struct _MPI2_SGE_TRANS_SIMPLE_UNION +{ + union + { + MPI2_SGE_SIMPLE_UNION Simple; + MPI2_SGE_TRANSACTION_UNION Transaction; + } u; +} MPI2_SGE_TRANS_SIMPLE_UNION, MPI2_POINTER PTR_MPI2_SGE_TRANS_SIMPLE_UNION, + Mpi2SGETransSimpleUnion_t, MPI2_POINTER pMpi2SGETransSimpleUnion_t; + + +/**************************************************************************** +* All MPI SGE types union +****************************************************************************/ + +typedef struct _MPI2_MPI_SGE_UNION +{ + union + { + MPI2_SGE_SIMPLE_UNION Simple; + MPI2_SGE_CHAIN_UNION Chain; + MPI2_SGE_TRANSACTION_UNION Transaction; + } u; +} MPI2_MPI_SGE_UNION, MPI2_POINTER PTR_MPI2_MPI_SGE_UNION, + Mpi2MpiSgeUnion_t, MPI2_POINTER pMpi2MpiSgeUnion_t; + + +/**************************************************************************** +* MPI SGE field definition and masks +****************************************************************************/ + +/* Flags field bit definitions */ + +#define MPI2_SGE_FLAGS_LAST_ELEMENT (0x80) +#define MPI2_SGE_FLAGS_END_OF_BUFFER (0x40) +#define MPI2_SGE_FLAGS_ELEMENT_TYPE_MASK (0x30) +#define MPI2_SGE_FLAGS_LOCAL_ADDRESS (0x08) +#define MPI2_SGE_FLAGS_DIRECTION (0x04) +#define MPI2_SGE_FLAGS_ADDRESS_SIZE (0x02) +#define MPI2_SGE_FLAGS_END_OF_LIST (0x01) + +#define MPI2_SGE_FLAGS_SHIFT (24) + +#define MPI2_SGE_LENGTH_MASK (0x00FFFFFF) +#define MPI2_SGE_CHAIN_LENGTH_MASK (0x0000FFFF) + +/* Element Type */ + +#define MPI2_SGE_FLAGS_TRANSACTION_ELEMENT (0x00) +#define MPI2_SGE_FLAGS_SIMPLE_ELEMENT (0x10) +#define MPI2_SGE_FLAGS_CHAIN_ELEMENT (0x30) +#define MPI2_SGE_FLAGS_ELEMENT_MASK (0x30) + +/* Address location */ + +#define MPI2_SGE_FLAGS_SYSTEM_ADDRESS (0x00) + +/* Direction */ + +#define MPI2_SGE_FLAGS_IOC_TO_HOST (0x00) +#define MPI2_SGE_FLAGS_HOST_TO_IOC (0x04) + +/* Address Size */ + +#define MPI2_SGE_FLAGS_32_BIT_ADDRESSING (0x00) +#define MPI2_SGE_FLAGS_64_BIT_ADDRESSING (0x02) + +/* Context Size */ + +#define MPI2_SGE_FLAGS_32_BIT_CONTEXT (0x00) +#define MPI2_SGE_FLAGS_64_BIT_CONTEXT (0x02) +#define MPI2_SGE_FLAGS_96_BIT_CONTEXT (0x04) +#define MPI2_SGE_FLAGS_128_BIT_CONTEXT (0x06) + +#define MPI2_SGE_CHAIN_OFFSET_MASK (0x00FF0000) +#define MPI2_SGE_CHAIN_OFFSET_SHIFT (16) + +/**************************************************************************** +* MPI SGE operation Macros +****************************************************************************/ + +/* SIMPLE FlagsLength manipulations... */ +#define MPI2_SGE_SET_FLAGS(f) ((U32)(f) << MPI2_SGE_FLAGS_SHIFT) +#define MPI2_SGE_GET_FLAGS(f) (((f) & ~MPI2_SGE_LENGTH_MASK) >> MPI2_SGE_FLAGS_SHIFT) +#define MPI2_SGE_LENGTH(f) ((f) & MPI2_SGE_LENGTH_MASK) +#define MPI2_SGE_CHAIN_LENGTH(f) ((f) & MPI2_SGE_CHAIN_LENGTH_MASK) + +#define MPI2_SGE_SET_FLAGS_LENGTH(f,l) (MPI2_SGE_SET_FLAGS(f) | MPI2_SGE_LENGTH(l)) + +#define MPI2_pSGE_GET_FLAGS(psg) MPI2_SGE_GET_FLAGS((psg)->FlagsLength) +#define MPI2_pSGE_GET_LENGTH(psg) MPI2_SGE_LENGTH((psg)->FlagsLength) +#define MPI2_pSGE_SET_FLAGS_LENGTH(psg,f,l) (psg)->FlagsLength = MPI2_SGE_SET_FLAGS_LENGTH(f,l) + +/* CAUTION - The following are READ-MODIFY-WRITE! */ +#define MPI2_pSGE_SET_FLAGS(psg,f) (psg)->FlagsLength |= MPI2_SGE_SET_FLAGS(f) +#define MPI2_pSGE_SET_LENGTH(psg,l) (psg)->FlagsLength |= MPI2_SGE_LENGTH(l) + +#define MPI2_GET_CHAIN_OFFSET(x) ((x & MPI2_SGE_CHAIN_OFFSET_MASK) >> MPI2_SGE_CHAIN_OFFSET_SHIFT) + + +/***************************************************************************** +* +* Fusion-MPT IEEE Scatter Gather Elements +* +*****************************************************************************/ + +/**************************************************************************** +* IEEE Simple Element structures +****************************************************************************/ + +typedef struct _MPI2_IEEE_SGE_SIMPLE32 +{ + U32 Address; + U32 FlagsLength; +} MPI2_IEEE_SGE_SIMPLE32, MPI2_POINTER PTR_MPI2_IEEE_SGE_SIMPLE32, + Mpi2IeeeSgeSimple32_t, MPI2_POINTER pMpi2IeeeSgeSimple32_t; + +typedef struct _MPI2_IEEE_SGE_SIMPLE64 +{ + U64 Address; + U32 Length; + U16 Reserved1; + U8 Reserved2; + U8 Flags; +} MPI2_IEEE_SGE_SIMPLE64, MPI2_POINTER PTR_MPI2_IEEE_SGE_SIMPLE64, + Mpi2IeeeSgeSimple64_t, MPI2_POINTER pMpi2IeeeSgeSimple64_t; + +typedef union _MPI2_IEEE_SGE_SIMPLE_UNION +{ + MPI2_IEEE_SGE_SIMPLE32 Simple32; + MPI2_IEEE_SGE_SIMPLE64 Simple64; +} MPI2_IEEE_SGE_SIMPLE_UNION, MPI2_POINTER PTR_MPI2_IEEE_SGE_SIMPLE_UNION, + Mpi2IeeeSgeSimpleUnion_t, MPI2_POINTER pMpi2IeeeSgeSimpleUnion_t; + + +/**************************************************************************** +* IEEE Chain Element structures +****************************************************************************/ + +typedef MPI2_IEEE_SGE_SIMPLE32 MPI2_IEEE_SGE_CHAIN32; + +typedef MPI2_IEEE_SGE_SIMPLE64 MPI2_IEEE_SGE_CHAIN64; + +typedef union _MPI2_IEEE_SGE_CHAIN_UNION +{ + MPI2_IEEE_SGE_CHAIN32 Chain32; + MPI2_IEEE_SGE_CHAIN64 Chain64; +} MPI2_IEEE_SGE_CHAIN_UNION, MPI2_POINTER PTR_MPI2_IEEE_SGE_CHAIN_UNION, + Mpi2IeeeSgeChainUnion_t, MPI2_POINTER pMpi2IeeeSgeChainUnion_t; + + +/**************************************************************************** +* All IEEE SGE types union +****************************************************************************/ + +typedef struct _MPI2_IEEE_SGE_UNION +{ + union + { + MPI2_IEEE_SGE_SIMPLE_UNION Simple; + MPI2_IEEE_SGE_CHAIN_UNION Chain; + } u; +} MPI2_IEEE_SGE_UNION, MPI2_POINTER PTR_MPI2_IEEE_SGE_UNION, + Mpi2IeeeSgeUnion_t, MPI2_POINTER pMpi2IeeeSgeUnion_t; + + +/**************************************************************************** +* IEEE SGE field definitions and masks +****************************************************************************/ + +/* Flags field bit definitions */ + +#define MPI2_IEEE_SGE_FLAGS_ELEMENT_TYPE_MASK (0x80) + +#define MPI2_IEEE32_SGE_FLAGS_SHIFT (24) + +#define MPI2_IEEE32_SGE_LENGTH_MASK (0x00FFFFFF) + +/* Element Type */ + +#define MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT (0x00) +#define MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT (0x80) + +/* Data Location Address Space */ + +#define MPI2_IEEE_SGE_FLAGS_ADDR_MASK (0x03) +#define MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR (0x00) +#define MPI2_IEEE_SGE_FLAGS_IOCDDR_ADDR (0x01) +#define MPI2_IEEE_SGE_FLAGS_IOCPLB_ADDR (0x02) +#define MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR (0x03) + + +/**************************************************************************** +* IEEE SGE operation Macros +****************************************************************************/ + +/* SIMPLE FlagsLength manipulations... */ +#define MPI2_IEEE32_SGE_SET_FLAGS(f) ((U32)(f) << MPI2_IEEE32_SGE_FLAGS_SHIFT) +#define MPI2_IEEE32_SGE_GET_FLAGS(f) (((f) & ~MPI2_IEEE32_SGE_LENGTH_MASK) >> MPI2_IEEE32_SGE_FLAGS_SHIFT) +#define MPI2_IEEE32_SGE_LENGTH(f) ((f) & MPI2_IEEE32_SGE_LENGTH_MASK) + +#define MPI2_IEEE32_SGE_SET_FLAGS_LENGTH(f, l) (MPI2_IEEE32_SGE_SET_FLAGS(f) | MPI2_IEEE32_SGE_LENGTH(l)) + +#define MPI2_IEEE32_pSGE_GET_FLAGS(psg) MPI2_IEEE32_SGE_GET_FLAGS((psg)->FlagsLength) +#define MPI2_IEEE32_pSGE_GET_LENGTH(psg) MPI2_IEEE32_SGE_LENGTH((psg)->FlagsLength) +#define MPI2_IEEE32_pSGE_SET_FLAGS_LENGTH(psg,f,l) (psg)->FlagsLength = MPI2_IEEE32_SGE_SET_FLAGS_LENGTH(f,l) + +/* CAUTION - The following are READ-MODIFY-WRITE! */ +#define MPI2_IEEE32_pSGE_SET_FLAGS(psg,f) (psg)->FlagsLength |= MPI2_IEEE32_SGE_SET_FLAGS(f) +#define MPI2_IEEE32_pSGE_SET_LENGTH(psg,l) (psg)->FlagsLength |= MPI2_IEEE32_SGE_LENGTH(l) + + + + +/***************************************************************************** +* +* Fusion-MPT MPI/IEEE Scatter Gather Unions +* +*****************************************************************************/ + +typedef union _MPI2_SIMPLE_SGE_UNION +{ + MPI2_SGE_SIMPLE_UNION MpiSimple; + MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple; +} MPI2_SIMPLE_SGE_UNION, MPI2_POINTER PTR_MPI2_SIMPLE_SGE_UNION, + Mpi2SimpleSgeUntion_t, MPI2_POINTER pMpi2SimpleSgeUntion_t; + + +typedef union _MPI2_SGE_IO_UNION +{ + MPI2_SGE_SIMPLE_UNION MpiSimple; + MPI2_SGE_CHAIN_UNION MpiChain; + MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple; + MPI2_IEEE_SGE_CHAIN_UNION IeeeChain; +} MPI2_SGE_IO_UNION, MPI2_POINTER PTR_MPI2_SGE_IO_UNION, + Mpi2SGEIOUnion_t, MPI2_POINTER pMpi2SGEIOUnion_t; + + +/**************************************************************************** +* +* Values for SGLFlags field, used in many request messages with an SGL +* +****************************************************************************/ + +/* values for MPI SGL Data Location Address Space subfield */ +#define MPI2_SGLFLAGS_ADDRESS_SPACE_MASK (0x0C) +#define MPI2_SGLFLAGS_SYSTEM_ADDRESS_SPACE (0x00) +#define MPI2_SGLFLAGS_IOCDDR_ADDRESS_SPACE (0x04) +#define MPI2_SGLFLAGS_IOCPLB_ADDRESS_SPACE (0x08) +#define MPI2_SGLFLAGS_IOCPLBNTA_ADDRESS_SPACE (0x0C) +/* values for SGL Type subfield */ +#define MPI2_SGLFLAGS_SGL_TYPE_MASK (0x03) +#define MPI2_SGLFLAGS_SGL_TYPE_MPI (0x00) +#define MPI2_SGLFLAGS_SGL_TYPE_IEEE32 (0x01) +#define MPI2_SGLFLAGS_SGL_TYPE_IEEE64 (0x02) + + +#endif + diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h new file mode 100644 index 00000000000..2f27cf6d6c6 --- /dev/null +++ b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h @@ -0,0 +1,2151 @@ +/* + * Copyright (c) 2000-2009 LSI Corporation. + * + * + * Name: mpi2_cnfg.h + * Title: MPI Configuration messages and pages + * Creation Date: November 10, 2006 + * + * mpi2_cnfg.h Version: 02.00.10 + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 06-04-07 02.00.01 Added defines for SAS IO Unit Page 2 PhyFlags. + * Added Manufacturing Page 11. + * Added MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE + * define. + * 06-26-07 02.00.02 Adding generic structure for product-specific + * Manufacturing pages: MPI2_CONFIG_PAGE_MANUFACTURING_PS. + * Rework of BIOS Page 2 configuration page. + * Fixed MPI2_BIOSPAGE2_BOOT_DEVICE to be a union of the + * forms. + * Added configuration pages IOC Page 8 and Driver + * Persistent Mapping Page 0. + * 08-31-07 02.00.03 Modified configuration pages dealing with Integrated + * RAID (Manufacturing Page 4, RAID Volume Pages 0 and 1, + * RAID Physical Disk Pages 0 and 1, RAID Configuration + * Page 0). + * Added new value for AccessStatus field of SAS Device + * Page 0 (_SATA_NEEDS_INITIALIZATION). + * 10-31-07 02.00.04 Added missing SEPDevHandle field to + * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0. + * 12-18-07 02.00.05 Modified IO Unit Page 0 to use 32-bit version fields for + * NVDATA. + * Modified IOC Page 7 to use masks and added field for + * SASBroadcastPrimitiveMasks. + * Added MPI2_CONFIG_PAGE_BIOS_4. + * Added MPI2_CONFIG_PAGE_LOG_0. + * 02-29-08 02.00.06 Modified various names to make them 32-character unique. + * Added SAS Device IDs. + * Updated Integrated RAID configuration pages including + * Manufacturing Page 4, IOC Page 6, and RAID Configuration + * Page 0. + * 05-21-08 02.00.07 Added define MPI2_MANPAGE4_MIX_SSD_SAS_SATA. + * Added define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION. + * Fixed define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING. + * Added missing MaxNumRoutedSasAddresses field to + * MPI2_CONFIG_PAGE_EXPANDER_0. + * Added SAS Port Page 0. + * Modified structure layout for + * MPI2_CONFIG_PAGE_DRIVER_MAPPING_0. + * 06-27-08 02.00.08 Changed MPI2_CONFIG_PAGE_RD_PDISK_1 to use + * MPI2_RAID_PHYS_DISK1_PATH_MAX to size the array. + * 10-02-08 02.00.09 Changed MPI2_RAID_PGAD_CONFIGNUM_MASK from 0x0000FFFF + * to 0x000000FF. + * Added two new values for the Physical Disk Coercion Size + * bits in the Flags field of Manufacturing Page 4. + * Added product-specific Manufacturing pages 16 to 31. + * Modified Flags bits for controlling write cache on SATA + * drives in IO Unit Page 1. + * Added new bit to AdditionalControlFlags of SAS IO Unit + * Page 1 to control Invalid Topology Correction. + * Added additional defines for RAID Volume Page 0 + * VolumeStatusFlags field. + * Modified meaning of RAID Volume Page 0 VolumeSettings + * define for auto-configure of hot-swap drives. + * Added SupportedPhysDisks field to RAID Volume Page 1 and + * added related defines. + * Added PhysDiskAttributes field (and related defines) to + * RAID Physical Disk Page 0. + * Added MPI2_SAS_PHYINFO_PHY_VACANT define. + * Added three new DiscoveryStatus bits for SAS IO Unit + * Page 0 and SAS Expander Page 0. + * Removed multiplexing information from SAS IO Unit pages. + * Added BootDeviceWaitTime field to SAS IO Unit Page 4. + * Removed Zone Address Resolved bit from PhyInfo and from + * Expander Page 0 Flags field. + * Added two new AccessStatus values to SAS Device Page 0 + * for indicating routing problems. Added 3 reserved words + * to this page. + * 01-19-09 02.00.10 Fixed defines for GPIOVal field of IO Unit Page 3. + * Inserted missing reserved field into structure for IOC + * Page 6. + * Added more pending task bits to RAID Volume Page 0 + * VolumeStatusFlags defines. + * Added MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED define. + * Added a new DiscoveryStatus bit for SAS IO Unit Page 0 + * and SAS Expander Page 0 to flag a downstream initiator + * when in simplified routing mode. + * Removed SATA Init Failure defines for DiscoveryStatus + * fields of SAS IO Unit Page 0 and SAS Expander Page 0. + * Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define. + * Added PortGroups, DmaGroup, and ControlGroup fields to + * SAS Device Page 0. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_CNFG_H +#define MPI2_CNFG_H + +/***************************************************************************** +* Configuration Page Header and defines +*****************************************************************************/ + +/* Config Page Header */ +typedef struct _MPI2_CONFIG_PAGE_HEADER +{ + U8 PageVersion; /* 0x00 */ + U8 PageLength; /* 0x01 */ + U8 PageNumber; /* 0x02 */ + U8 PageType; /* 0x03 */ +} MPI2_CONFIG_PAGE_HEADER, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_HEADER, + Mpi2ConfigPageHeader_t, MPI2_POINTER pMpi2ConfigPageHeader_t; + +typedef union _MPI2_CONFIG_PAGE_HEADER_UNION +{ + MPI2_CONFIG_PAGE_HEADER Struct; + U8 Bytes[4]; + U16 Word16[2]; + U32 Word32; +} MPI2_CONFIG_PAGE_HEADER_UNION, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_HEADER_UNION, + Mpi2ConfigPageHeaderUnion, MPI2_POINTER pMpi2ConfigPageHeaderUnion; + +/* Extended Config Page Header */ +typedef struct _MPI2_CONFIG_EXTENDED_PAGE_HEADER +{ + U8 PageVersion; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 PageNumber; /* 0x02 */ + U8 PageType; /* 0x03 */ + U16 ExtPageLength; /* 0x04 */ + U8 ExtPageType; /* 0x06 */ + U8 Reserved2; /* 0x07 */ +} MPI2_CONFIG_EXTENDED_PAGE_HEADER, + MPI2_POINTER PTR_MPI2_CONFIG_EXTENDED_PAGE_HEADER, + Mpi2ConfigExtendedPageHeader_t, MPI2_POINTER pMpi2ConfigExtendedPageHeader_t; + +typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION +{ + MPI2_CONFIG_PAGE_HEADER Struct; + MPI2_CONFIG_EXTENDED_PAGE_HEADER Ext; + U8 Bytes[8]; + U16 Word16[4]; + U32 Word32[2]; +} MPI2_CONFIG_EXT_PAGE_HEADER_UNION, MPI2_POINTER PTR_MPI2_CONFIG_EXT_PAGE_HEADER_UNION, + Mpi2ConfigPageExtendedHeaderUnion, MPI2_POINTER pMpi2ConfigPageExtendedHeaderUnion; + + +/* PageType field values */ +#define MPI2_CONFIG_PAGEATTR_READ_ONLY (0x00) +#define MPI2_CONFIG_PAGEATTR_CHANGEABLE (0x10) +#define MPI2_CONFIG_PAGEATTR_PERSISTENT (0x20) +#define MPI2_CONFIG_PAGEATTR_MASK (0xF0) + +#define MPI2_CONFIG_PAGETYPE_IO_UNIT (0x00) +#define MPI2_CONFIG_PAGETYPE_IOC (0x01) +#define MPI2_CONFIG_PAGETYPE_BIOS (0x02) +#define MPI2_CONFIG_PAGETYPE_RAID_VOLUME (0x08) +#define MPI2_CONFIG_PAGETYPE_MANUFACTURING (0x09) +#define MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK (0x0A) +#define MPI2_CONFIG_PAGETYPE_EXTENDED (0x0F) +#define MPI2_CONFIG_PAGETYPE_MASK (0x0F) + +#define MPI2_CONFIG_TYPENUM_MASK (0x0FFF) + + +/* ExtPageType field values */ +#define MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT (0x10) +#define MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER (0x11) +#define MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE (0x12) +#define MPI2_CONFIG_EXTPAGETYPE_SAS_PHY (0x13) +#define MPI2_CONFIG_EXTPAGETYPE_LOG (0x14) +#define MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE (0x15) +#define MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG (0x16) +#define MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING (0x17) +#define MPI2_CONFIG_EXTPAGETYPE_SAS_PORT (0x18) + + +/***************************************************************************** +* PageAddress defines +*****************************************************************************/ + +/* RAID Volume PageAddress format */ +#define MPI2_RAID_VOLUME_PGAD_FORM_MASK (0xF0000000) +#define MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) +#define MPI2_RAID_VOLUME_PGAD_FORM_HANDLE (0x10000000) + +#define MPI2_RAID_VOLUME_PGAD_HANDLE_MASK (0x0000FFFF) + + +/* RAID Physical Disk PageAddress format */ +#define MPI2_PHYSDISK_PGAD_FORM_MASK (0xF0000000) +#define MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM (0x00000000) +#define MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM (0x10000000) +#define MPI2_PHYSDISK_PGAD_FORM_DEVHANDLE (0x20000000) + +#define MPI2_PHYSDISK_PGAD_PHYSDISKNUM_MASK (0x000000FF) +#define MPI2_PHYSDISK_PGAD_DEVHANDLE_MASK (0x0000FFFF) + + +/* SAS Expander PageAddress format */ +#define MPI2_SAS_EXPAND_PGAD_FORM_MASK (0xF0000000) +#define MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL (0x00000000) +#define MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM (0x10000000) +#define MPI2_SAS_EXPAND_PGAD_FORM_HNDL (0x20000000) + +#define MPI2_SAS_EXPAND_PGAD_HANDLE_MASK (0x0000FFFF) +#define MPI2_SAS_EXPAND_PGAD_PHYNUM_MASK (0x00FF0000) +#define MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT (16) + + +/* SAS Device PageAddress format */ +#define MPI2_SAS_DEVICE_PGAD_FORM_MASK (0xF0000000) +#define MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) +#define MPI2_SAS_DEVICE_PGAD_FORM_HANDLE (0x20000000) + +#define MPI2_SAS_DEVICE_PGAD_HANDLE_MASK (0x0000FFFF) + + +/* SAS PHY PageAddress format */ +#define MPI2_SAS_PHY_PGAD_FORM_MASK (0xF0000000) +#define MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER (0x00000000) +#define MPI2_SAS_PHY_PGAD_FORM_PHY_TBL_INDEX (0x10000000) + +#define MPI2_SAS_PHY_PGAD_PHY_NUMBER_MASK (0x000000FF) +#define MPI2_SAS_PHY_PGAD_PHY_TBL_INDEX_MASK (0x0000FFFF) + + +/* SAS Port PageAddress format */ +#define MPI2_SASPORT_PGAD_FORM_MASK (0xF0000000) +#define MPI2_SASPORT_PGAD_FORM_GET_NEXT_PORT (0x00000000) +#define MPI2_SASPORT_PGAD_FORM_PORT_NUM (0x10000000) + +#define MPI2_SASPORT_PGAD_PORTNUMBER_MASK (0x00000FFF) + + +/* SAS Enclosure PageAddress format */ +#define MPI2_SAS_ENCLOS_PGAD_FORM_MASK (0xF0000000) +#define MPI2_SAS_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) +#define MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE (0x10000000) + +#define MPI2_SAS_ENCLOS_PGAD_HANDLE_MASK (0x0000FFFF) + + +/* RAID Configuration PageAddress format */ +#define MPI2_RAID_PGAD_FORM_MASK (0xF0000000) +#define MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM (0x00000000) +#define MPI2_RAID_PGAD_FORM_CONFIGNUM (0x10000000) +#define MPI2_RAID_PGAD_FORM_ACTIVE_CONFIG (0x20000000) + +#define MPI2_RAID_PGAD_CONFIGNUM_MASK (0x000000FF) + + +/* Driver Persistent Mapping PageAddress format */ +#define MPI2_DPM_PGAD_FORM_MASK (0xF0000000) +#define MPI2_DPM_PGAD_FORM_ENTRY_RANGE (0x00000000) + +#define MPI2_DPM_PGAD_ENTRY_COUNT_MASK (0x0FFF0000) +#define MPI2_DPM_PGAD_ENTRY_COUNT_SHIFT (16) +#define MPI2_DPM_PGAD_START_ENTRY_MASK (0x0000FFFF) + + +/**************************************************************************** +* Configuration messages +****************************************************************************/ + +/* Configuration Request Message */ +typedef struct _MPI2_CONFIG_REQUEST +{ + U8 Action; /* 0x00 */ + U8 SGLFlags; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 ExtPageLength; /* 0x04 */ + U8 ExtPageType; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved1; /* 0x0A */ + U32 Reserved2; /* 0x0C */ + U32 Reserved3; /* 0x10 */ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x14 */ + U32 PageAddress; /* 0x18 */ + MPI2_SGE_IO_UNION PageBufferSGE; /* 0x1C */ +} MPI2_CONFIG_REQUEST, MPI2_POINTER PTR_MPI2_CONFIG_REQUEST, + Mpi2ConfigRequest_t, MPI2_POINTER pMpi2ConfigRequest_t; + +/* values for the Action field */ +#define MPI2_CONFIG_ACTION_PAGE_HEADER (0x00) +#define MPI2_CONFIG_ACTION_PAGE_READ_CURRENT (0x01) +#define MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT (0x02) +#define MPI2_CONFIG_ACTION_PAGE_DEFAULT (0x03) +#define MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM (0x04) +#define MPI2_CONFIG_ACTION_PAGE_READ_DEFAULT (0x05) +#define MPI2_CONFIG_ACTION_PAGE_READ_NVRAM (0x06) +#define MPI2_CONFIG_ACTION_PAGE_GET_CHANGEABLE (0x07) + +/* values for SGLFlags field are in the SGL section of mpi2.h */ + + +/* Config Reply Message */ +typedef struct _MPI2_CONFIG_REPLY +{ + U8 Action; /* 0x00 */ + U8 SGLFlags; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 ExtPageLength; /* 0x04 */ + U8 ExtPageType; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved1; /* 0x0A */ + U16 Reserved2; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x14 */ +} MPI2_CONFIG_REPLY, MPI2_POINTER PTR_MPI2_CONFIG_REPLY, + Mpi2ConfigReply_t, MPI2_POINTER pMpi2ConfigReply_t; + + + +/***************************************************************************** +* +* C o n f i g u r a t i o n P a g e s +* +*****************************************************************************/ + +/**************************************************************************** +* Manufacturing Config pages +****************************************************************************/ + +#define MPI2_MFGPAGE_VENDORID_LSI (0x1000) + +/* SAS */ +#define MPI2_MFGPAGE_DEVID_SAS2004 (0x0070) +#define MPI2_MFGPAGE_DEVID_SAS2008 (0x0072) +#define MPI2_MFGPAGE_DEVID_SAS2108_1 (0x0074) +#define MPI2_MFGPAGE_DEVID_SAS2108_2 (0x0076) +#define MPI2_MFGPAGE_DEVID_SAS2108_3 (0x0077) +#define MPI2_MFGPAGE_DEVID_SAS2116_1 (0x0064) +#define MPI2_MFGPAGE_DEVID_SAS2116_2 (0x0065) + + +/* Manufacturing Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_MAN_0 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 ChipName[16]; /* 0x04 */ + U8 ChipRevision[8]; /* 0x14 */ + U8 BoardName[16]; /* 0x1C */ + U8 BoardAssembly[16]; /* 0x2C */ + U8 BoardTracerNumber[16]; /* 0x3C */ +} MPI2_CONFIG_PAGE_MAN_0, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_0, + Mpi2ManufacturingPage0_t, MPI2_POINTER pMpi2ManufacturingPage0_t; + +#define MPI2_MANUFACTURING0_PAGEVERSION (0x00) + + +/* Manufacturing Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_MAN_1 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 VPD[256]; /* 0x04 */ +} MPI2_CONFIG_PAGE_MAN_1, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_1, + Mpi2ManufacturingPage1_t, MPI2_POINTER pMpi2ManufacturingPage1_t; + +#define MPI2_MANUFACTURING1_PAGEVERSION (0x00) + + +typedef struct _MPI2_CHIP_REVISION_ID +{ + U16 DeviceID; /* 0x00 */ + U8 PCIRevisionID; /* 0x02 */ + U8 Reserved; /* 0x03 */ +} MPI2_CHIP_REVISION_ID, MPI2_POINTER PTR_MPI2_CHIP_REVISION_ID, + Mpi2ChipRevisionId_t, MPI2_POINTER pMpi2ChipRevisionId_t; + + +/* Manufacturing Page 2 */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.PageLength at runtime. + */ +#ifndef MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS +#define MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_MAN_2 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + MPI2_CHIP_REVISION_ID ChipId; /* 0x04 */ + U32 HwSettings[MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS];/* 0x08 */ +} MPI2_CONFIG_PAGE_MAN_2, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_2, + Mpi2ManufacturingPage2_t, MPI2_POINTER pMpi2ManufacturingPage2_t; + +#define MPI2_MANUFACTURING2_PAGEVERSION (0x00) + + +/* Manufacturing Page 3 */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.PageLength at runtime. + */ +#ifndef MPI2_MAN_PAGE_3_INFO_WORDS +#define MPI2_MAN_PAGE_3_INFO_WORDS (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_MAN_3 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + MPI2_CHIP_REVISION_ID ChipId; /* 0x04 */ + U32 Info[MPI2_MAN_PAGE_3_INFO_WORDS];/* 0x08 */ +} MPI2_CONFIG_PAGE_MAN_3, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_3, + Mpi2ManufacturingPage3_t, MPI2_POINTER pMpi2ManufacturingPage3_t; + +#define MPI2_MANUFACTURING3_PAGEVERSION (0x00) + + +/* Manufacturing Page 4 */ + +typedef struct _MPI2_MANPAGE4_PWR_SAVE_SETTINGS +{ + U8 PowerSaveFlags; /* 0x00 */ + U8 InternalOperationsSleepTime; /* 0x01 */ + U8 InternalOperationsRunTime; /* 0x02 */ + U8 HostIdleTime; /* 0x03 */ +} MPI2_MANPAGE4_PWR_SAVE_SETTINGS, + MPI2_POINTER PTR_MPI2_MANPAGE4_PWR_SAVE_SETTINGS, + Mpi2ManPage4PwrSaveSettings_t, MPI2_POINTER pMpi2ManPage4PwrSaveSettings_t; + +/* defines for the PowerSaveFlags field */ +#define MPI2_MANPAGE4_MASK_POWERSAVE_MODE (0x03) +#define MPI2_MANPAGE4_POWERSAVE_MODE_DISABLED (0x00) +#define MPI2_MANPAGE4_CUSTOM_POWERSAVE_MODE (0x01) +#define MPI2_MANPAGE4_FULL_POWERSAVE_MODE (0x02) + +typedef struct _MPI2_CONFIG_PAGE_MAN_4 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x04 */ + U32 Flags; /* 0x08 */ + U8 InquirySize; /* 0x0C */ + U8 Reserved2; /* 0x0D */ + U16 Reserved3; /* 0x0E */ + U8 InquiryData[56]; /* 0x10 */ + U32 RAID0VolumeSettings; /* 0x48 */ + U32 RAID1EVolumeSettings; /* 0x4C */ + U32 RAID1VolumeSettings; /* 0x50 */ + U32 RAID10VolumeSettings; /* 0x54 */ + U32 Reserved4; /* 0x58 */ + U32 Reserved5; /* 0x5C */ + MPI2_MANPAGE4_PWR_SAVE_SETTINGS PowerSaveSettings; /* 0x60 */ + U8 MaxOCEDisks; /* 0x64 */ + U8 ResyncRate; /* 0x65 */ + U16 DataScrubDuration; /* 0x66 */ + U8 MaxHotSpares; /* 0x68 */ + U8 MaxPhysDisksPerVol; /* 0x69 */ + U8 MaxPhysDisks; /* 0x6A */ + U8 MaxVolumes; /* 0x6B */ +} MPI2_CONFIG_PAGE_MAN_4, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_4, + Mpi2ManufacturingPage4_t, MPI2_POINTER pMpi2ManufacturingPage4_t; + +#define MPI2_MANUFACTURING4_PAGEVERSION (0x0A) + +/* Manufacturing Page 4 Flags field */ +#define MPI2_MANPAGE4_METADATA_SIZE_MASK (0x00030000) +#define MPI2_MANPAGE4_METADATA_512MB (0x00000000) + +#define MPI2_MANPAGE4_MIX_SSD_SAS_SATA (0x00008000) +#define MPI2_MANPAGE4_MIX_SSD_AND_NON_SSD (0x00004000) +#define MPI2_MANPAGE4_HIDE_PHYSDISK_NON_IR (0x00002000) + +#define MPI2_MANPAGE4_MASK_PHYSDISK_COERCION (0x00001C00) +#define MPI2_MANPAGE4_PHYSDISK_COERCION_1GB (0x00000000) +#define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION (0x00000400) +#define MPI2_MANPAGE4_PHYSDISK_ADAPTIVE_COERCION (0x00000800) +#define MPI2_MANPAGE4_PHYSDISK_ZERO_COERCION (0x00000C00) + +#define MPI2_MANPAGE4_MASK_BAD_BLOCK_MARKING (0x00000300) +#define MPI2_MANPAGE4_DEFAULT_BAD_BLOCK_MARKING (0x00000000) +#define MPI2_MANPAGE4_TABLE_BAD_BLOCK_MARKING (0x00000100) +#define MPI2_MANPAGE4_WRITE_LONG_BAD_BLOCK_MARKING (0x00000200) + +#define MPI2_MANPAGE4_FORCE_OFFLINE_FAILOVER (0x00000080) +#define MPI2_MANPAGE4_RAID10_DISABLE (0x00000040) +#define MPI2_MANPAGE4_RAID1E_DISABLE (0x00000020) +#define MPI2_MANPAGE4_RAID1_DISABLE (0x00000010) +#define MPI2_MANPAGE4_RAID0_DISABLE (0x00000008) +#define MPI2_MANPAGE4_IR_MODEPAGE8_DISABLE (0x00000004) +#define MPI2_MANPAGE4_IM_RESYNC_CACHE_ENABLE (0x00000002) +#define MPI2_MANPAGE4_IR_NO_MIX_SAS_SATA (0x00000001) + + +/* Manufacturing Page 5 */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.PageLength or NumPhys at runtime. + */ +#ifndef MPI2_MAN_PAGE_5_PHY_ENTRIES +#define MPI2_MAN_PAGE_5_PHY_ENTRIES (1) +#endif + +typedef struct _MPI2_MANUFACTURING5_ENTRY +{ + U64 WWID; /* 0x00 */ + U64 DeviceName; /* 0x08 */ +} MPI2_MANUFACTURING5_ENTRY, MPI2_POINTER PTR_MPI2_MANUFACTURING5_ENTRY, + Mpi2Manufacturing5Entry_t, MPI2_POINTER pMpi2Manufacturing5Entry_t; + +typedef struct _MPI2_CONFIG_PAGE_MAN_5 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 NumPhys; /* 0x04 */ + U8 Reserved1; /* 0x05 */ + U16 Reserved2; /* 0x06 */ + U32 Reserved3; /* 0x08 */ + U32 Reserved4; /* 0x0C */ + MPI2_MANUFACTURING5_ENTRY Phy[MPI2_MAN_PAGE_5_PHY_ENTRIES];/* 0x08 */ +} MPI2_CONFIG_PAGE_MAN_5, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_5, + Mpi2ManufacturingPage5_t, MPI2_POINTER pMpi2ManufacturingPage5_t; + +#define MPI2_MANUFACTURING5_PAGEVERSION (0x03) + + +/* Manufacturing Page 6 */ + +typedef struct _MPI2_CONFIG_PAGE_MAN_6 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 ProductSpecificInfo;/* 0x04 */ +} MPI2_CONFIG_PAGE_MAN_6, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_6, + Mpi2ManufacturingPage6_t, MPI2_POINTER pMpi2ManufacturingPage6_t; + +#define MPI2_MANUFACTURING6_PAGEVERSION (0x00) + + +/* Manufacturing Page 7 */ + +typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO +{ + U32 Pinout; /* 0x00 */ + U8 Connector[16]; /* 0x04 */ + U8 Location; /* 0x14 */ + U8 Reserved1; /* 0x15 */ + U16 Slot; /* 0x16 */ + U32 Reserved2; /* 0x18 */ +} MPI2_MANPAGE7_CONNECTOR_INFO, MPI2_POINTER PTR_MPI2_MANPAGE7_CONNECTOR_INFO, + Mpi2ManPage7ConnectorInfo_t, MPI2_POINTER pMpi2ManPage7ConnectorInfo_t; + +/* defines for the Pinout field */ +#define MPI2_MANPAGE7_PINOUT_SFF_8484_L4 (0x00080000) +#define MPI2_MANPAGE7_PINOUT_SFF_8484_L3 (0x00040000) +#define MPI2_MANPAGE7_PINOUT_SFF_8484_L2 (0x00020000) +#define MPI2_MANPAGE7_PINOUT_SFF_8484_L1 (0x00010000) +#define MPI2_MANPAGE7_PINOUT_SFF_8470_L4 (0x00000800) +#define MPI2_MANPAGE7_PINOUT_SFF_8470_L3 (0x00000400) +#define MPI2_MANPAGE7_PINOUT_SFF_8470_L2 (0x00000200) +#define MPI2_MANPAGE7_PINOUT_SFF_8470_L1 (0x00000100) +#define MPI2_MANPAGE7_PINOUT_SFF_8482 (0x00000002) +#define MPI2_MANPAGE7_PINOUT_CONNECTION_UNKNOWN (0x00000001) + +/* defines for the Location field */ +#define MPI2_MANPAGE7_LOCATION_UNKNOWN (0x01) +#define MPI2_MANPAGE7_LOCATION_INTERNAL (0x02) +#define MPI2_MANPAGE7_LOCATION_EXTERNAL (0x04) +#define MPI2_MANPAGE7_LOCATION_SWITCHABLE (0x08) +#define MPI2_MANPAGE7_LOCATION_AUTO (0x10) +#define MPI2_MANPAGE7_LOCATION_NOT_PRESENT (0x20) +#define MPI2_MANPAGE7_LOCATION_NOT_CONNECTED (0x80) + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check NumPhys at runtime. + */ +#ifndef MPI2_MANPAGE7_CONNECTOR_INFO_MAX +#define MPI2_MANPAGE7_CONNECTOR_INFO_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_MAN_7 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x04 */ + U32 Reserved2; /* 0x08 */ + U32 Flags; /* 0x0C */ + U8 EnclosureName[16]; /* 0x10 */ + U8 NumPhys; /* 0x20 */ + U8 Reserved3; /* 0x21 */ + U16 Reserved4; /* 0x22 */ + MPI2_MANPAGE7_CONNECTOR_INFO ConnectorInfo[MPI2_MANPAGE7_CONNECTOR_INFO_MAX]; /* 0x24 */ +} MPI2_CONFIG_PAGE_MAN_7, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_7, + Mpi2ManufacturingPage7_t, MPI2_POINTER pMpi2ManufacturingPage7_t; + +#define MPI2_MANUFACTURING7_PAGEVERSION (0x00) + +/* defines for the Flags field */ +#define MPI2_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001) + + +/* + * Generic structure to use for product-specific manufacturing pages + * (currently Manufacturing Page 8 through Manufacturing Page 31). + */ + +typedef struct _MPI2_CONFIG_PAGE_MAN_PS +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 ProductSpecificInfo;/* 0x04 */ +} MPI2_CONFIG_PAGE_MAN_PS, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_PS, + Mpi2ManufacturingPagePS_t, MPI2_POINTER pMpi2ManufacturingPagePS_t; + +#define MPI2_MANUFACTURING8_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING9_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING10_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING11_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING12_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING13_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING14_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING15_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING16_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING17_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING18_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING19_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING20_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING21_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING22_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING23_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING24_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING25_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING26_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING27_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING28_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING29_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING30_PAGEVERSION (0x00) +#define MPI2_MANUFACTURING31_PAGEVERSION (0x00) + + +/**************************************************************************** +* IO Unit Config Pages +****************************************************************************/ + +/* IO Unit Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_0 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U64 UniqueValue; /* 0x04 */ + MPI2_VERSION_UNION NvdataVersionDefault; /* 0x08 */ + MPI2_VERSION_UNION NvdataVersionPersistent; /* 0x0A */ +} MPI2_CONFIG_PAGE_IO_UNIT_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_0, + Mpi2IOUnitPage0_t, MPI2_POINTER pMpi2IOUnitPage0_t; + +#define MPI2_IOUNITPAGE0_PAGEVERSION (0x02) + + +/* IO Unit Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Flags; /* 0x04 */ +} MPI2_CONFIG_PAGE_IO_UNIT_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_1, + Mpi2IOUnitPage1_t, MPI2_POINTER pMpi2IOUnitPage1_t; + +#define MPI2_IOUNITPAGE1_PAGEVERSION (0x04) + +/* IO Unit Page 1 Flags defines */ +#define MPI2_IOUNITPAGE1_MASK_SATA_WRITE_CACHE (0x00000600) +#define MPI2_IOUNITPAGE1_ENABLE_SATA_WRITE_CACHE (0x00000000) +#define MPI2_IOUNITPAGE1_DISABLE_SATA_WRITE_CACHE (0x00000200) +#define MPI2_IOUNITPAGE1_UNCHANGED_SATA_WRITE_CACHE (0x00000400) +#define MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE (0x00000100) +#define MPI2_IOUNITPAGE1_DISABLE_IR (0x00000040) +#define MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING (0x00000020) +#define MPI2_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID (0x00000004) +#define MPI2_IOUNITPAGE1_MULTI_PATHING (0x00000002) +#define MPI2_IOUNITPAGE1_SINGLE_PATHING (0x00000000) + + +/* IO Unit Page 3 */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.PageLength at runtime. + */ +#ifndef MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX +#define MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_3 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 GPIOCount; /* 0x04 */ + U8 Reserved1; /* 0x05 */ + U16 Reserved2; /* 0x06 */ + U16 GPIOVal[MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX];/* 0x08 */ +} MPI2_CONFIG_PAGE_IO_UNIT_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_3, + Mpi2IOUnitPage3_t, MPI2_POINTER pMpi2IOUnitPage3_t; + +#define MPI2_IOUNITPAGE3_PAGEVERSION (0x01) + +/* defines for IO Unit Page 3 GPIOVal field */ +#define MPI2_IOUNITPAGE3_GPIO_FUNCTION_MASK (0xFFFC) +#define MPI2_IOUNITPAGE3_GPIO_FUNCTION_SHIFT (2) +#define MPI2_IOUNITPAGE3_GPIO_SETTING_OFF (0x0000) +#define MPI2_IOUNITPAGE3_GPIO_SETTING_ON (0x0001) + + +/**************************************************************************** +* IOC Config Pages +****************************************************************************/ + +/* IOC Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_IOC_0 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x04 */ + U32 Reserved2; /* 0x08 */ + U16 VendorID; /* 0x0C */ + U16 DeviceID; /* 0x0E */ + U8 RevisionID; /* 0x10 */ + U8 Reserved3; /* 0x11 */ + U16 Reserved4; /* 0x12 */ + U32 ClassCode; /* 0x14 */ + U16 SubsystemVendorID; /* 0x18 */ + U16 SubsystemID; /* 0x1A */ +} MPI2_CONFIG_PAGE_IOC_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_0, + Mpi2IOCPage0_t, MPI2_POINTER pMpi2IOCPage0_t; + +#define MPI2_IOCPAGE0_PAGEVERSION (0x02) + + +/* IOC Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_IOC_1 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Flags; /* 0x04 */ + U32 CoalescingTimeout; /* 0x08 */ + U8 CoalescingDepth; /* 0x0C */ + U8 PCISlotNum; /* 0x0D */ + U8 PCIBusNum; /* 0x0E */ + U8 PCIDomainSegment; /* 0x0F */ + U32 Reserved1; /* 0x10 */ + U32 Reserved2; /* 0x14 */ +} MPI2_CONFIG_PAGE_IOC_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_1, + Mpi2IOCPage1_t, MPI2_POINTER pMpi2IOCPage1_t; + +#define MPI2_IOCPAGE1_PAGEVERSION (0x05) + +/* defines for IOC Page 1 Flags field */ +#define MPI2_IOCPAGE1_REPLY_COALESCING (0x00000001) + +#define MPI2_IOCPAGE1_PCISLOTNUM_UNKNOWN (0xFF) +#define MPI2_IOCPAGE1_PCIBUSNUM_UNKNOWN (0xFF) +#define MPI2_IOCPAGE1_PCIDOMAIN_UNKNOWN (0xFF) + +/* IOC Page 6 */ + +typedef struct _MPI2_CONFIG_PAGE_IOC_6 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 CapabilitiesFlags; /* 0x04 */ + U8 MaxDrivesRAID0; /* 0x08 */ + U8 MaxDrivesRAID1; /* 0x09 */ + U8 MaxDrivesRAID1E; /* 0x0A */ + U8 MaxDrivesRAID10; /* 0x0B */ + U8 MinDrivesRAID0; /* 0x0C */ + U8 MinDrivesRAID1; /* 0x0D */ + U8 MinDrivesRAID1E; /* 0x0E */ + U8 MinDrivesRAID10; /* 0x0F */ + U32 Reserved1; /* 0x10 */ + U8 MaxGlobalHotSpares; /* 0x14 */ + U8 MaxPhysDisks; /* 0x15 */ + U8 MaxVolumes; /* 0x16 */ + U8 MaxConfigs; /* 0x17 */ + U8 MaxOCEDisks; /* 0x18 */ + U8 Reserved2; /* 0x19 */ + U16 Reserved3; /* 0x1A */ + U32 SupportedStripeSizeMapRAID0; /* 0x1C */ + U32 SupportedStripeSizeMapRAID1E; /* 0x20 */ + U32 SupportedStripeSizeMapRAID10; /* 0x24 */ + U32 Reserved4; /* 0x28 */ + U32 Reserved5; /* 0x2C */ + U16 DefaultMetadataSize; /* 0x30 */ + U16 Reserved6; /* 0x32 */ + U16 MaxBadBlockTableEntries; /* 0x34 */ + U16 Reserved7; /* 0x36 */ + U32 IRNvsramVersion; /* 0x38 */ +} MPI2_CONFIG_PAGE_IOC_6, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_6, + Mpi2IOCPage6_t, MPI2_POINTER pMpi2IOCPage6_t; + +#define MPI2_IOCPAGE6_PAGEVERSION (0x04) + +/* defines for IOC Page 6 CapabilitiesFlags */ +#define MPI2_IOCPAGE6_CAP_FLAGS_RAID10_SUPPORT (0x00000010) +#define MPI2_IOCPAGE6_CAP_FLAGS_RAID1_SUPPORT (0x00000008) +#define MPI2_IOCPAGE6_CAP_FLAGS_RAID1E_SUPPORT (0x00000004) +#define MPI2_IOCPAGE6_CAP_FLAGS_RAID0_SUPPORT (0x00000002) +#define MPI2_IOCPAGE6_CAP_FLAGS_GLOBAL_HOT_SPARE (0x00000001) + + +/* IOC Page 7 */ + +#define MPI2_IOCPAGE7_EVENTMASK_WORDS (4) + +typedef struct _MPI2_CONFIG_PAGE_IOC_7 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x04 */ + U32 EventMasks[MPI2_IOCPAGE7_EVENTMASK_WORDS];/* 0x08 */ + U16 SASBroadcastPrimitiveMasks; /* 0x18 */ + U16 Reserved2; /* 0x1A */ + U32 Reserved3; /* 0x1C */ +} MPI2_CONFIG_PAGE_IOC_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_7, + Mpi2IOCPage7_t, MPI2_POINTER pMpi2IOCPage7_t; + +#define MPI2_IOCPAGE7_PAGEVERSION (0x01) + + +/* IOC Page 8 */ + +typedef struct _MPI2_CONFIG_PAGE_IOC_8 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 NumDevsPerEnclosure; /* 0x04 */ + U8 Reserved1; /* 0x05 */ + U16 Reserved2; /* 0x06 */ + U16 MaxPersistentEntries; /* 0x08 */ + U16 MaxNumPhysicalMappedIDs; /* 0x0A */ + U16 Flags; /* 0x0C */ + U16 Reserved3; /* 0x0E */ + U16 IRVolumeMappingFlags; /* 0x10 */ + U16 Reserved4; /* 0x12 */ + U32 Reserved5; /* 0x14 */ +} MPI2_CONFIG_PAGE_IOC_8, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IOC_8, + Mpi2IOCPage8_t, MPI2_POINTER pMpi2IOCPage8_t; + +#define MPI2_IOCPAGE8_PAGEVERSION (0x00) + +/* defines for IOC Page 8 Flags field */ +#define MPI2_IOCPAGE8_FLAGS_DA_START_SLOT_1 (0x00000020) +#define MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0 (0x00000010) + +#define MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE (0x0000000E) +#define MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING (0x00000000) +#define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING (0x00000002) + +#define MPI2_IOCPAGE8_FLAGS_DISABLE_PERSISTENT_MAPPING (0x00000001) +#define MPI2_IOCPAGE8_FLAGS_ENABLE_PERSISTENT_MAPPING (0x00000000) + +/* defines for IOC Page 8 IRVolumeMappingFlags */ +#define MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE (0x00000003) +#define MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING (0x00000000) +#define MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING (0x00000001) + + +/**************************************************************************** +* BIOS Config Pages +****************************************************************************/ + +/* BIOS Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_BIOS_1 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 BiosOptions; /* 0x04 */ + U32 IOCSettings; /* 0x08 */ + U32 Reserved1; /* 0x0C */ + U32 DeviceSettings; /* 0x10 */ + U16 NumberOfDevices; /* 0x14 */ + U16 Reserved2; /* 0x16 */ + U16 IOTimeoutBlockDevicesNonRM; /* 0x18 */ + U16 IOTimeoutSequential; /* 0x1A */ + U16 IOTimeoutOther; /* 0x1C */ + U16 IOTimeoutBlockDevicesRM; /* 0x1E */ +} MPI2_CONFIG_PAGE_BIOS_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_1, + Mpi2BiosPage1_t, MPI2_POINTER pMpi2BiosPage1_t; + +#define MPI2_BIOSPAGE1_PAGEVERSION (0x04) + +/* values for BIOS Page 1 BiosOptions field */ +#define MPI2_BIOSPAGE1_OPTIONS_DISABLE_BIOS (0x00000001) + +/* values for BIOS Page 1 IOCSettings field */ +#define MPI2_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE (0x00030000) +#define MPI2_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT (0x00000000) +#define MPI2_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT (0x00010000) + +#define MPI2_BIOSPAGE1_IOCSET_MASK_RM_SETTING (0x000000C0) +#define MPI2_BIOSPAGE1_IOCSET_NONE_RM_SETTING (0x00000000) +#define MPI2_BIOSPAGE1_IOCSET_BOOT_RM_SETTING (0x00000040) +#define MPI2_BIOSPAGE1_IOCSET_MEDIA_RM_SETTING (0x00000080) + +#define MPI2_BIOSPAGE1_IOCSET_MASK_ADAPTER_SUPPORT (0x00000030) +#define MPI2_BIOSPAGE1_IOCSET_NO_SUPPORT (0x00000000) +#define MPI2_BIOSPAGE1_IOCSET_BIOS_SUPPORT (0x00000010) +#define MPI2_BIOSPAGE1_IOCSET_OS_SUPPORT (0x00000020) +#define MPI2_BIOSPAGE1_IOCSET_ALL_SUPPORT (0x00000030) + +#define MPI2_BIOSPAGE1_IOCSET_ALTERNATE_CHS (0x00000008) + +/* values for BIOS Page 1 DeviceSettings field */ +#define MPI2_BIOSPAGE1_DEVSET_DISABLE_SMART_POLLING (0x00000010) +#define MPI2_BIOSPAGE1_DEVSET_DISABLE_SEQ_LUN (0x00000008) +#define MPI2_BIOSPAGE1_DEVSET_DISABLE_RM_LUN (0x00000004) +#define MPI2_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN (0x00000002) +#define MPI2_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN (0x00000001) + + +/* BIOS Page 2 */ + +typedef struct _MPI2_BOOT_DEVICE_ADAPTER_ORDER +{ + U32 Reserved1; /* 0x00 */ + U32 Reserved2; /* 0x04 */ + U32 Reserved3; /* 0x08 */ + U32 Reserved4; /* 0x0C */ + U32 Reserved5; /* 0x10 */ + U32 Reserved6; /* 0x14 */ +} MPI2_BOOT_DEVICE_ADAPTER_ORDER, + MPI2_POINTER PTR_MPI2_BOOT_DEVICE_ADAPTER_ORDER, + Mpi2BootDeviceAdapterOrder_t, MPI2_POINTER pMpi2BootDeviceAdapterOrder_t; + +typedef struct _MPI2_BOOT_DEVICE_SAS_WWID +{ + U64 SASAddress; /* 0x00 */ + U8 LUN[8]; /* 0x08 */ + U32 Reserved1; /* 0x10 */ + U32 Reserved2; /* 0x14 */ +} MPI2_BOOT_DEVICE_SAS_WWID, MPI2_POINTER PTR_MPI2_BOOT_DEVICE_SAS_WWID, + Mpi2BootDeviceSasWwid_t, MPI2_POINTER pMpi2BootDeviceSasWwid_t; + +typedef struct _MPI2_BOOT_DEVICE_ENCLOSURE_SLOT +{ + U64 EnclosureLogicalID; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U32 Reserved2; /* 0x0C */ + U16 SlotNumber; /* 0x10 */ + U16 Reserved3; /* 0x12 */ + U32 Reserved4; /* 0x14 */ +} MPI2_BOOT_DEVICE_ENCLOSURE_SLOT, + MPI2_POINTER PTR_MPI2_BOOT_DEVICE_ENCLOSURE_SLOT, + Mpi2BootDeviceEnclosureSlot_t, MPI2_POINTER pMpi2BootDeviceEnclosureSlot_t; + +typedef struct _MPI2_BOOT_DEVICE_DEVICE_NAME +{ + U64 DeviceName; /* 0x00 */ + U8 LUN[8]; /* 0x08 */ + U32 Reserved1; /* 0x10 */ + U32 Reserved2; /* 0x14 */ +} MPI2_BOOT_DEVICE_DEVICE_NAME, MPI2_POINTER PTR_MPI2_BOOT_DEVICE_DEVICE_NAME, + Mpi2BootDeviceDeviceName_t, MPI2_POINTER pMpi2BootDeviceDeviceName_t; + +typedef union _MPI2_MPI2_BIOSPAGE2_BOOT_DEVICE +{ + MPI2_BOOT_DEVICE_ADAPTER_ORDER AdapterOrder; + MPI2_BOOT_DEVICE_SAS_WWID SasWwid; + MPI2_BOOT_DEVICE_ENCLOSURE_SLOT EnclosureSlot; + MPI2_BOOT_DEVICE_DEVICE_NAME DeviceName; +} MPI2_BIOSPAGE2_BOOT_DEVICE, MPI2_POINTER PTR_MPI2_BIOSPAGE2_BOOT_DEVICE, + Mpi2BiosPage2BootDevice_t, MPI2_POINTER pMpi2BiosPage2BootDevice_t; + +typedef struct _MPI2_CONFIG_PAGE_BIOS_2 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x04 */ + U32 Reserved2; /* 0x08 */ + U32 Reserved3; /* 0x0C */ + U32 Reserved4; /* 0x10 */ + U32 Reserved5; /* 0x14 */ + U32 Reserved6; /* 0x18 */ + U8 ReqBootDeviceForm; /* 0x1C */ + U8 Reserved7; /* 0x1D */ + U16 Reserved8; /* 0x1E */ + MPI2_BIOSPAGE2_BOOT_DEVICE RequestedBootDevice; /* 0x20 */ + U8 ReqAltBootDeviceForm; /* 0x38 */ + U8 Reserved9; /* 0x39 */ + U16 Reserved10; /* 0x3A */ + MPI2_BIOSPAGE2_BOOT_DEVICE RequestedAltBootDevice; /* 0x3C */ + U8 CurrentBootDeviceForm; /* 0x58 */ + U8 Reserved11; /* 0x59 */ + U16 Reserved12; /* 0x5A */ + MPI2_BIOSPAGE2_BOOT_DEVICE CurrentBootDevice; /* 0x58 */ +} MPI2_CONFIG_PAGE_BIOS_2, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_2, + Mpi2BiosPage2_t, MPI2_POINTER pMpi2BiosPage2_t; + +#define MPI2_BIOSPAGE2_PAGEVERSION (0x04) + +/* values for BIOS Page 2 BootDeviceForm fields */ +#define MPI2_BIOSPAGE2_FORM_MASK (0x0F) +#define MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED (0x00) +#define MPI2_BIOSPAGE2_FORM_SAS_WWID (0x05) +#define MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT (0x06) +#define MPI2_BIOSPAGE2_FORM_DEVICE_NAME (0x07) + + +/* BIOS Page 3 */ + +typedef struct _MPI2_ADAPTER_INFO +{ + U8 PciBusNumber; /* 0x00 */ + U8 PciDeviceAndFunctionNumber; /* 0x01 */ + U16 AdapterFlags; /* 0x02 */ +} MPI2_ADAPTER_INFO, MPI2_POINTER PTR_MPI2_ADAPTER_INFO, + Mpi2AdapterInfo_t, MPI2_POINTER pMpi2AdapterInfo_t; + +#define MPI2_ADAPTER_INFO_FLAGS_EMBEDDED (0x0001) +#define MPI2_ADAPTER_INFO_FLAGS_INIT_STATUS (0x0002) + +typedef struct _MPI2_CONFIG_PAGE_BIOS_3 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U32 GlobalFlags; /* 0x04 */ + U32 BiosVersion; /* 0x08 */ + MPI2_ADAPTER_INFO AdapterOrder[4]; /* 0x0C */ + U32 Reserved1; /* 0x1C */ +} MPI2_CONFIG_PAGE_BIOS_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_3, + Mpi2BiosPage3_t, MPI2_POINTER pMpi2BiosPage3_t; + +#define MPI2_BIOSPAGE3_PAGEVERSION (0x00) + +/* values for BIOS Page 3 GlobalFlags */ +#define MPI2_BIOSPAGE3_FLAGS_PAUSE_ON_ERROR (0x00000002) +#define MPI2_BIOSPAGE3_FLAGS_VERBOSE_ENABLE (0x00000004) +#define MPI2_BIOSPAGE3_FLAGS_HOOK_INT_40_DISABLE (0x00000010) + +#define MPI2_BIOSPAGE3_FLAGS_DEV_LIST_DISPLAY_MASK (0x000000E0) +#define MPI2_BIOSPAGE3_FLAGS_INSTALLED_DEV_DISPLAY (0x00000000) +#define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DISPLAY (0x00000020) +#define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DEV_DISPLAY (0x00000040) + + +/* BIOS Page 4 */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.PageLength or NumPhys at runtime. + */ +#ifndef MPI2_BIOS_PAGE_4_PHY_ENTRIES +#define MPI2_BIOS_PAGE_4_PHY_ENTRIES (1) +#endif + +typedef struct _MPI2_BIOS4_ENTRY +{ + U64 ReassignmentWWID; /* 0x00 */ + U64 ReassignmentDeviceName; /* 0x08 */ +} MPI2_BIOS4_ENTRY, MPI2_POINTER PTR_MPI2_BIOS4_ENTRY, + Mpi2MBios4Entry_t, MPI2_POINTER pMpi2Bios4Entry_t; + +typedef struct _MPI2_CONFIG_PAGE_BIOS_4 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 NumPhys; /* 0x04 */ + U8 Reserved1; /* 0x05 */ + U16 Reserved2; /* 0x06 */ + MPI2_BIOS4_ENTRY Phy[MPI2_BIOS_PAGE_4_PHY_ENTRIES]; /* 0x08 */ +} MPI2_CONFIG_PAGE_BIOS_4, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_BIOS_4, + Mpi2BiosPage4_t, MPI2_POINTER pMpi2BiosPage4_t; + +#define MPI2_BIOSPAGE4_PAGEVERSION (0x01) + + +/**************************************************************************** +* RAID Volume Config Pages +****************************************************************************/ + +/* RAID Volume Page 0 */ + +typedef struct _MPI2_RAIDVOL0_PHYS_DISK +{ + U8 RAIDSetNum; /* 0x00 */ + U8 PhysDiskMap; /* 0x01 */ + U8 PhysDiskNum; /* 0x02 */ + U8 Reserved; /* 0x03 */ +} MPI2_RAIDVOL0_PHYS_DISK, MPI2_POINTER PTR_MPI2_RAIDVOL0_PHYS_DISK, + Mpi2RaidVol0PhysDisk_t, MPI2_POINTER pMpi2RaidVol0PhysDisk_t; + +/* defines for the PhysDiskMap field */ +#define MPI2_RAIDVOL0_PHYSDISK_PRIMARY (0x01) +#define MPI2_RAIDVOL0_PHYSDISK_SECONDARY (0x02) + +typedef struct _MPI2_RAIDVOL0_SETTINGS +{ + U16 Settings; /* 0x00 */ + U8 HotSparePool; /* 0x01 */ + U8 Reserved; /* 0x02 */ +} MPI2_RAIDVOL0_SETTINGS, MPI2_POINTER PTR_MPI2_RAIDVOL0_SETTINGS, + Mpi2RaidVol0Settings_t, MPI2_POINTER pMpi2RaidVol0Settings_t; + +/* RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk */ +#define MPI2_RAID_HOT_SPARE_POOL_0 (0x01) +#define MPI2_RAID_HOT_SPARE_POOL_1 (0x02) +#define MPI2_RAID_HOT_SPARE_POOL_2 (0x04) +#define MPI2_RAID_HOT_SPARE_POOL_3 (0x08) +#define MPI2_RAID_HOT_SPARE_POOL_4 (0x10) +#define MPI2_RAID_HOT_SPARE_POOL_5 (0x20) +#define MPI2_RAID_HOT_SPARE_POOL_6 (0x40) +#define MPI2_RAID_HOT_SPARE_POOL_7 (0x80) + +/* RAID Volume Page 0 VolumeSettings defines */ +#define MPI2_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX (0x0008) +#define MPI2_RAIDVOL0_SETTING_AUTO_CONFIG_HSWAP_DISABLE (0x0004) + +#define MPI2_RAIDVOL0_SETTING_MASK_WRITE_CACHING (0x0003) +#define MPI2_RAIDVOL0_SETTING_UNCHANGED (0x0000) +#define MPI2_RAIDVOL0_SETTING_DISABLE_WRITE_CACHING (0x0001) +#define MPI2_RAIDVOL0_SETTING_ENABLE_WRITE_CACHING (0x0002) + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.PageLength at runtime. + */ +#ifndef MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX +#define MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_0 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U16 DevHandle; /* 0x04 */ + U8 VolumeState; /* 0x06 */ + U8 VolumeType; /* 0x07 */ + U32 VolumeStatusFlags; /* 0x08 */ + MPI2_RAIDVOL0_SETTINGS VolumeSettings; /* 0x0C */ + U64 MaxLBA; /* 0x10 */ + U32 StripeSize; /* 0x18 */ + U16 BlockSize; /* 0x1C */ + U16 Reserved1; /* 0x1E */ + U8 SupportedPhysDisks; /* 0x20 */ + U8 ResyncRate; /* 0x21 */ + U16 DataScrubDuration; /* 0x22 */ + U8 NumPhysDisks; /* 0x24 */ + U8 Reserved2; /* 0x25 */ + U8 Reserved3; /* 0x26 */ + U8 InactiveStatus; /* 0x27 */ + MPI2_RAIDVOL0_PHYS_DISK PhysDisk[MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX]; /* 0x28 */ +} MPI2_CONFIG_PAGE_RAID_VOL_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RAID_VOL_0, + Mpi2RaidVolPage0_t, MPI2_POINTER pMpi2RaidVolPage0_t; + +#define MPI2_RAIDVOLPAGE0_PAGEVERSION (0x0A) + +/* values for RAID VolumeState */ +#define MPI2_RAID_VOL_STATE_MISSING (0x00) +#define MPI2_RAID_VOL_STATE_FAILED (0x01) +#define MPI2_RAID_VOL_STATE_INITIALIZING (0x02) +#define MPI2_RAID_VOL_STATE_ONLINE (0x03) +#define MPI2_RAID_VOL_STATE_DEGRADED (0x04) +#define MPI2_RAID_VOL_STATE_OPTIMAL (0x05) + +/* values for RAID VolumeType */ +#define MPI2_RAID_VOL_TYPE_RAID0 (0x00) +#define MPI2_RAID_VOL_TYPE_RAID1E (0x01) +#define MPI2_RAID_VOL_TYPE_RAID1 (0x02) +#define MPI2_RAID_VOL_TYPE_RAID10 (0x05) +#define MPI2_RAID_VOL_TYPE_UNKNOWN (0xFF) + +/* values for RAID Volume Page 0 VolumeStatusFlags field */ +#define MPI2_RAIDVOL0_STATUS_FLAG_PENDING_RESYNC (0x02000000) +#define MPI2_RAIDVOL0_STATUS_FLAG_BACKG_INIT_PENDING (0x01000000) +#define MPI2_RAIDVOL0_STATUS_FLAG_MDC_PENDING (0x00800000) +#define MPI2_RAIDVOL0_STATUS_FLAG_USER_CONSIST_PENDING (0x00400000) +#define MPI2_RAIDVOL0_STATUS_FLAG_MAKE_DATA_CONSISTENT (0x00200000) +#define MPI2_RAIDVOL0_STATUS_FLAG_DATA_SCRUB (0x00100000) +#define MPI2_RAIDVOL0_STATUS_FLAG_CONSISTENCY_CHECK (0x00080000) +#define MPI2_RAIDVOL0_STATUS_FLAG_CAPACITY_EXPANSION (0x00040000) +#define MPI2_RAIDVOL0_STATUS_FLAG_BACKGROUND_INIT (0x00020000) +#define MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS (0x00010000) +#define MPI2_RAIDVOL0_STATUS_FLAG_OCE_ALLOWED (0x00000040) +#define MPI2_RAIDVOL0_STATUS_FLAG_BGI_COMPLETE (0x00000020) +#define MPI2_RAIDVOL0_STATUS_FLAG_1E_OFFSET_MIRROR (0x00000000) +#define MPI2_RAIDVOL0_STATUS_FLAG_1E_ADJACENT_MIRROR (0x00000010) +#define MPI2_RAIDVOL0_STATUS_FLAG_BAD_BLOCK_TABLE_FULL (0x00000008) +#define MPI2_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE (0x00000004) +#define MPI2_RAIDVOL0_STATUS_FLAG_QUIESCED (0x00000002) +#define MPI2_RAIDVOL0_STATUS_FLAG_ENABLED (0x00000001) + +/* values for RAID Volume Page 0 SupportedPhysDisks field */ +#define MPI2_RAIDVOL0_SUPPORT_SOLID_STATE_DISKS (0x08) +#define MPI2_RAIDVOL0_SUPPORT_HARD_DISKS (0x04) +#define MPI2_RAIDVOL0_SUPPORT_SAS_PROTOCOL (0x02) +#define MPI2_RAIDVOL0_SUPPORT_SATA_PROTOCOL (0x01) + +/* values for RAID Volume Page 0 InactiveStatus field */ +#define MPI2_RAIDVOLPAGE0_UNKNOWN_INACTIVE (0x00) +#define MPI2_RAIDVOLPAGE0_STALE_METADATA_INACTIVE (0x01) +#define MPI2_RAIDVOLPAGE0_FOREIGN_VOLUME_INACTIVE (0x02) +#define MPI2_RAIDVOLPAGE0_INSUFFICIENT_RESOURCE_INACTIVE (0x03) +#define MPI2_RAIDVOLPAGE0_CLONE_VOLUME_INACTIVE (0x04) +#define MPI2_RAIDVOLPAGE0_INSUFFICIENT_METADATA_INACTIVE (0x05) +#define MPI2_RAIDVOLPAGE0_PREVIOUSLY_DELETED (0x06) + + +/* RAID Volume Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_1 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U16 DevHandle; /* 0x04 */ + U16 Reserved0; /* 0x06 */ + U8 GUID[24]; /* 0x08 */ + U8 Name[16]; /* 0x20 */ + U64 WWID; /* 0x30 */ + U32 Reserved1; /* 0x38 */ + U32 Reserved2; /* 0x3C */ +} MPI2_CONFIG_PAGE_RAID_VOL_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RAID_VOL_1, + Mpi2RaidVolPage1_t, MPI2_POINTER pMpi2RaidVolPage1_t; + +#define MPI2_RAIDVOLPAGE1_PAGEVERSION (0x03) + + +/**************************************************************************** +* RAID Physical Disk Config Pages +****************************************************************************/ + +/* RAID Physical Disk Page 0 */ + +typedef struct _MPI2_RAIDPHYSDISK0_SETTINGS +{ + U16 Reserved1; /* 0x00 */ + U8 HotSparePool; /* 0x02 */ + U8 Reserved2; /* 0x03 */ +} MPI2_RAIDPHYSDISK0_SETTINGS, MPI2_POINTER PTR_MPI2_RAIDPHYSDISK0_SETTINGS, + Mpi2RaidPhysDisk0Settings_t, MPI2_POINTER pMpi2RaidPhysDisk0Settings_t; + +/* use MPI2_RAID_HOT_SPARE_POOL_ defines for the HotSparePool field */ + +typedef struct _MPI2_RAIDPHYSDISK0_INQUIRY_DATA +{ + U8 VendorID[8]; /* 0x00 */ + U8 ProductID[16]; /* 0x08 */ + U8 ProductRevLevel[4]; /* 0x18 */ + U8 SerialNum[32]; /* 0x1C */ +} MPI2_RAIDPHYSDISK0_INQUIRY_DATA, + MPI2_POINTER PTR_MPI2_RAIDPHYSDISK0_INQUIRY_DATA, + Mpi2RaidPhysDisk0InquiryData_t, MPI2_POINTER pMpi2RaidPhysDisk0InquiryData_t; + +typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_0 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U16 DevHandle; /* 0x04 */ + U8 Reserved1; /* 0x06 */ + U8 PhysDiskNum; /* 0x07 */ + MPI2_RAIDPHYSDISK0_SETTINGS PhysDiskSettings; /* 0x08 */ + U32 Reserved2; /* 0x0C */ + MPI2_RAIDPHYSDISK0_INQUIRY_DATA InquiryData; /* 0x10 */ + U32 Reserved3; /* 0x4C */ + U8 PhysDiskState; /* 0x50 */ + U8 OfflineReason; /* 0x51 */ + U8 IncompatibleReason; /* 0x52 */ + U8 PhysDiskAttributes; /* 0x53 */ + U32 PhysDiskStatusFlags; /* 0x54 */ + U64 DeviceMaxLBA; /* 0x58 */ + U64 HostMaxLBA; /* 0x60 */ + U64 CoercedMaxLBA; /* 0x68 */ + U16 BlockSize; /* 0x70 */ + U16 Reserved5; /* 0x72 */ + U32 Reserved6; /* 0x74 */ +} MPI2_CONFIG_PAGE_RD_PDISK_0, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RD_PDISK_0, + Mpi2RaidPhysDiskPage0_t, MPI2_POINTER pMpi2RaidPhysDiskPage0_t; + +#define MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION (0x05) + +/* PhysDiskState defines */ +#define MPI2_RAID_PD_STATE_NOT_CONFIGURED (0x00) +#define MPI2_RAID_PD_STATE_NOT_COMPATIBLE (0x01) +#define MPI2_RAID_PD_STATE_OFFLINE (0x02) +#define MPI2_RAID_PD_STATE_ONLINE (0x03) +#define MPI2_RAID_PD_STATE_HOT_SPARE (0x04) +#define MPI2_RAID_PD_STATE_DEGRADED (0x05) +#define MPI2_RAID_PD_STATE_REBUILDING (0x06) +#define MPI2_RAID_PD_STATE_OPTIMAL (0x07) + +/* OfflineReason defines */ +#define MPI2_PHYSDISK0_ONLINE (0x00) +#define MPI2_PHYSDISK0_OFFLINE_MISSING (0x01) +#define MPI2_PHYSDISK0_OFFLINE_FAILED (0x03) +#define MPI2_PHYSDISK0_OFFLINE_INITIALIZING (0x04) +#define MPI2_PHYSDISK0_OFFLINE_REQUESTED (0x05) +#define MPI2_PHYSDISK0_OFFLINE_FAILED_REQUESTED (0x06) +#define MPI2_PHYSDISK0_OFFLINE_OTHER (0xFF) + +/* IncompatibleReason defines */ +#define MPI2_PHYSDISK0_COMPATIBLE (0x00) +#define MPI2_PHYSDISK0_INCOMPATIBLE_PROTOCOL (0x01) +#define MPI2_PHYSDISK0_INCOMPATIBLE_BLOCKSIZE (0x02) +#define MPI2_PHYSDISK0_INCOMPATIBLE_MAX_LBA (0x03) +#define MPI2_PHYSDISK0_INCOMPATIBLE_SATA_EXTENDED_CMD (0x04) +#define MPI2_PHYSDISK0_INCOMPATIBLE_REMOVEABLE_MEDIA (0x05) +#define MPI2_PHYSDISK0_INCOMPATIBLE_UNKNOWN (0xFF) + +/* PhysDiskAttributes defines */ +#define MPI2_PHYSDISK0_ATTRIB_SOLID_STATE_DRIVE (0x08) +#define MPI2_PHYSDISK0_ATTRIB_HARD_DISK_DRIVE (0x04) +#define MPI2_PHYSDISK0_ATTRIB_SAS_PROTOCOL (0x02) +#define MPI2_PHYSDISK0_ATTRIB_SATA_PROTOCOL (0x01) + +/* PhysDiskStatusFlags defines */ +#define MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED (0x00000040) +#define MPI2_PHYSDISK0_STATUS_FLAG_OCE_TARGET (0x00000020) +#define MPI2_PHYSDISK0_STATUS_FLAG_WRITE_CACHE_ENABLED (0x00000010) +#define MPI2_PHYSDISK0_STATUS_FLAG_OPTIMAL_PREVIOUS (0x00000000) +#define MPI2_PHYSDISK0_STATUS_FLAG_NOT_OPTIMAL_PREVIOUS (0x00000008) +#define MPI2_PHYSDISK0_STATUS_FLAG_INACTIVE_VOLUME (0x00000004) +#define MPI2_PHYSDISK0_STATUS_FLAG_QUIESCED (0x00000002) +#define MPI2_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC (0x00000001) + + +/* RAID Physical Disk Page 1 */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.PageLength or NumPhysDiskPaths at runtime. + */ +#ifndef MPI2_RAID_PHYS_DISK1_PATH_MAX +#define MPI2_RAID_PHYS_DISK1_PATH_MAX (1) +#endif + +typedef struct _MPI2_RAIDPHYSDISK1_PATH +{ + U16 DevHandle; /* 0x00 */ + U16 Reserved1; /* 0x02 */ + U64 WWID; /* 0x04 */ + U64 OwnerWWID; /* 0x0C */ + U8 OwnerIdentifier; /* 0x14 */ + U8 Reserved2; /* 0x15 */ + U16 Flags; /* 0x16 */ +} MPI2_RAIDPHYSDISK1_PATH, MPI2_POINTER PTR_MPI2_RAIDPHYSDISK1_PATH, + Mpi2RaidPhysDisk1Path_t, MPI2_POINTER pMpi2RaidPhysDisk1Path_t; + +/* RAID Physical Disk Page 1 Physical Disk Path Flags field defines */ +#define MPI2_RAID_PHYSDISK1_FLAG_PRIMARY (0x0004) +#define MPI2_RAID_PHYSDISK1_FLAG_BROKEN (0x0002) +#define MPI2_RAID_PHYSDISK1_FLAG_INVALID (0x0001) + +typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 +{ + MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */ + U8 NumPhysDiskPaths; /* 0x04 */ + U8 PhysDiskNum; /* 0x05 */ + U16 Reserved1; /* 0x06 */ + U32 Reserved2; /* 0x08 */ + MPI2_RAIDPHYSDISK1_PATH PhysicalDiskPath[MPI2_RAID_PHYS_DISK1_PATH_MAX];/* 0x0C */ +} MPI2_CONFIG_PAGE_RD_PDISK_1, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RD_PDISK_1, + Mpi2RaidPhysDiskPage1_t, MPI2_POINTER pMpi2RaidPhysDiskPage1_t; + +#define MPI2_RAIDPHYSDISKPAGE1_PAGEVERSION (0x02) + + +/**************************************************************************** +* values for fields used by several types of SAS Config Pages +****************************************************************************/ + +/* values for NegotiatedLinkRates fields */ +#define MPI2_SAS_NEG_LINK_RATE_MASK_LOGICAL (0xF0) +#define MPI2_SAS_NEG_LINK_RATE_SHIFT_LOGICAL (4) +#define MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL (0x0F) +/* link rates used for Negotiated Physical and Logical Link Rate */ +#define MPI2_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE (0x00) +#define MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED (0x01) +#define MPI2_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED (0x02) +#define MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE (0x03) +#define MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR (0x04) +#define MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS (0x05) +#define MPI2_SAS_NEG_LINK_RATE_1_5 (0x08) +#define MPI2_SAS_NEG_LINK_RATE_3_0 (0x09) +#define MPI2_SAS_NEG_LINK_RATE_6_0 (0x0A) + + +/* values for AttachedPhyInfo fields */ +#define MPI2_SAS_APHYINFO_INSIDE_ZPSDS_PERSISTENT (0x00000040) +#define MPI2_SAS_APHYINFO_REQUESTED_INSIDE_ZPSDS (0x00000020) +#define MPI2_SAS_APHYINFO_BREAK_REPLY_CAPABLE (0x00000010) + +#define MPI2_SAS_APHYINFO_REASON_MASK (0x0000000F) +#define MPI2_SAS_APHYINFO_REASON_UNKNOWN (0x00000000) +#define MPI2_SAS_APHYINFO_REASON_POWER_ON (0x00000001) +#define MPI2_SAS_APHYINFO_REASON_HARD_RESET (0x00000002) +#define MPI2_SAS_APHYINFO_REASON_SMP_PHY_CONTROL (0x00000003) +#define MPI2_SAS_APHYINFO_REASON_LOSS_OF_SYNC (0x00000004) +#define MPI2_SAS_APHYINFO_REASON_MULTIPLEXING_SEQ (0x00000005) +#define MPI2_SAS_APHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00000006) +#define MPI2_SAS_APHYINFO_REASON_BREAK_TIMEOUT (0x00000007) +#define MPI2_SAS_APHYINFO_REASON_PHY_TEST_STOPPED (0x00000008) + + +/* values for PhyInfo fields */ +#define MPI2_SAS_PHYINFO_PHY_VACANT (0x80000000) +#define MPI2_SAS_PHYINFO_CHANGED_REQ_INSIDE_ZPSDS (0x04000000) +#define MPI2_SAS_PHYINFO_INSIDE_ZPSDS_PERSISTENT (0x02000000) +#define MPI2_SAS_PHYINFO_REQ_INSIDE_ZPSDS (0x01000000) +#define MPI2_SAS_PHYINFO_ZONE_GROUP_PERSISTENT (0x00400000) +#define MPI2_SAS_PHYINFO_INSIDE_ZPSDS (0x00200000) +#define MPI2_SAS_PHYINFO_ZONING_ENABLED (0x00100000) + +#define MPI2_SAS_PHYINFO_REASON_MASK (0x000F0000) +#define MPI2_SAS_PHYINFO_REASON_UNKNOWN (0x00000000) +#define MPI2_SAS_PHYINFO_REASON_POWER_ON (0x00010000) +#define MPI2_SAS_PHYINFO_REASON_HARD_RESET (0x00020000) +#define MPI2_SAS_PHYINFO_REASON_SMP_PHY_CONTROL (0x00030000) +#define MPI2_SAS_PHYINFO_REASON_LOSS_OF_SYNC (0x00040000) +#define MPI2_SAS_PHYINFO_REASON_MULTIPLEXING_SEQ (0x00050000) +#define MPI2_SAS_PHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00060000) +#define MPI2_SAS_PHYINFO_REASON_BREAK_TIMEOUT (0x00070000) +#define MPI2_SAS_PHYINFO_REASON_PHY_TEST_STOPPED (0x00080000) + +#define MPI2_SAS_PHYINFO_MULTIPLEXING_SUPPORTED (0x00008000) +#define MPI2_SAS_PHYINFO_SATA_PORT_ACTIVE (0x00004000) +#define MPI2_SAS_PHYINFO_SATA_PORT_SELECTOR_PRESENT (0x00002000) +#define MPI2_SAS_PHYINFO_VIRTUAL_PHY (0x00001000) + +#define MPI2_SAS_PHYINFO_MASK_PARTIAL_PATHWAY_TIME (0x00000F00) +#define MPI2_SAS_PHYINFO_SHIFT_PARTIAL_PATHWAY_TIME (8) + +#define MPI2_SAS_PHYINFO_MASK_ROUTING_ATTRIBUTE (0x000000F0) +#define MPI2_SAS_PHYINFO_DIRECT_ROUTING (0x00000000) +#define MPI2_SAS_PHYINFO_SUBTRACTIVE_ROUTING (0x00000010) +#define MPI2_SAS_PHYINFO_TABLE_ROUTING (0x00000020) + + +/* values for SAS ProgrammedLinkRate fields */ +#define MPI2_SAS_PRATE_MAX_RATE_MASK (0xF0) +#define MPI2_SAS_PRATE_MAX_RATE_NOT_PROGRAMMABLE (0x00) +#define MPI2_SAS_PRATE_MAX_RATE_1_5 (0x80) +#define MPI2_SAS_PRATE_MAX_RATE_3_0 (0x90) +#define MPI2_SAS_PRATE_MAX_RATE_6_0 (0xA0) +#define MPI2_SAS_PRATE_MIN_RATE_MASK (0x0F) +#define MPI2_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00) +#define MPI2_SAS_PRATE_MIN_RATE_1_5 (0x08) +#define MPI2_SAS_PRATE_MIN_RATE_3_0 (0x09) +#define MPI2_SAS_PRATE_MIN_RATE_6_0 (0x0A) + + +/* values for SAS HwLinkRate fields */ +#define MPI2_SAS_HWRATE_MAX_RATE_MASK (0xF0) +#define MPI2_SAS_HWRATE_MAX_RATE_1_5 (0x80) +#define MPI2_SAS_HWRATE_MAX_RATE_3_0 (0x90) +#define MPI2_SAS_HWRATE_MAX_RATE_6_0 (0xA0) +#define MPI2_SAS_HWRATE_MIN_RATE_MASK (0x0F) +#define MPI2_SAS_HWRATE_MIN_RATE_1_5 (0x08) +#define MPI2_SAS_HWRATE_MIN_RATE_3_0 (0x09) +#define MPI2_SAS_HWRATE_MIN_RATE_6_0 (0x0A) + + + +/**************************************************************************** +* SAS IO Unit Config Pages +****************************************************************************/ + +/* SAS IO Unit Page 0 */ + +typedef struct _MPI2_SAS_IO_UNIT0_PHY_DATA +{ + U8 Port; /* 0x00 */ + U8 PortFlags; /* 0x01 */ + U8 PhyFlags; /* 0x02 */ + U8 NegotiatedLinkRate; /* 0x03 */ + U32 ControllerPhyDeviceInfo;/* 0x04 */ + U16 AttachedDevHandle; /* 0x08 */ + U16 ControllerDevHandle; /* 0x0A */ + U32 DiscoveryStatus; /* 0x0C */ + U32 Reserved; /* 0x10 */ +} MPI2_SAS_IO_UNIT0_PHY_DATA, MPI2_POINTER PTR_MPI2_SAS_IO_UNIT0_PHY_DATA, + Mpi2SasIOUnit0PhyData_t, MPI2_POINTER pMpi2SasIOUnit0PhyData_t; + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.ExtPageLength or NumPhys at runtime. + */ +#ifndef MPI2_SAS_IOUNIT0_PHY_MAX +#define MPI2_SAS_IOUNIT0_PHY_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_0 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U8 NumPhys; /* 0x0C */ + U8 Reserved2; /* 0x0D */ + U16 Reserved3; /* 0x0E */ + MPI2_SAS_IO_UNIT0_PHY_DATA PhyData[MPI2_SAS_IOUNIT0_PHY_MAX]; /* 0x10 */ +} MPI2_CONFIG_PAGE_SASIOUNIT_0, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_0, + Mpi2SasIOUnitPage0_t, MPI2_POINTER pMpi2SasIOUnitPage0_t; + +#define MPI2_SASIOUNITPAGE0_PAGEVERSION (0x05) + +/* values for SAS IO Unit Page 0 PortFlags */ +#define MPI2_SASIOUNIT0_PORTFLAGS_DISCOVERY_IN_PROGRESS (0x08) +#define MPI2_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG (0x01) + +/* values for SAS IO Unit Page 0 PhyFlags */ +#define MPI2_SASIOUNIT0_PHYFLAGS_ZONING_ENABLED (0x10) +#define MPI2_SASIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08) + +/* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ + +/* see mpi2_sas.h for values for SAS IO Unit Page 0 ControllerPhyDeviceInfo values */ + +/* values for SAS IO Unit Page 0 DiscoveryStatus */ +#define MPI2_SASIOUNIT0_DS_MAX_ENCLOSURES_EXCEED (0x80000000) +#define MPI2_SASIOUNIT0_DS_MAX_EXPANDERS_EXCEED (0x40000000) +#define MPI2_SASIOUNIT0_DS_MAX_DEVICES_EXCEED (0x20000000) +#define MPI2_SASIOUNIT0_DS_MAX_TOPO_PHYS_EXCEED (0x10000000) +#define MPI2_SASIOUNIT0_DS_DOWNSTREAM_INITIATOR (0x08000000) +#define MPI2_SASIOUNIT0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000) +#define MPI2_SASIOUNIT0_DS_EXP_MULTI_SUBTRACTIVE (0x00004000) +#define MPI2_SASIOUNIT0_DS_MULTI_PORT_DOMAIN (0x00002000) +#define MPI2_SASIOUNIT0_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000) +#define MPI2_SASIOUNIT0_DS_UNSUPPORTED_DEVICE (0x00000800) +#define MPI2_SASIOUNIT0_DS_TABLE_LINK (0x00000400) +#define MPI2_SASIOUNIT0_DS_SUBTRACTIVE_LINK (0x00000200) +#define MPI2_SASIOUNIT0_DS_SMP_CRC_ERROR (0x00000100) +#define MPI2_SASIOUNIT0_DS_SMP_FUNCTION_FAILED (0x00000080) +#define MPI2_SASIOUNIT0_DS_INDEX_NOT_EXIST (0x00000040) +#define MPI2_SASIOUNIT0_DS_OUT_ROUTE_ENTRIES (0x00000020) +#define MPI2_SASIOUNIT0_DS_SMP_TIMEOUT (0x00000010) +#define MPI2_SASIOUNIT0_DS_MULTIPLE_PORTS (0x00000004) +#define MPI2_SASIOUNIT0_DS_UNADDRESSABLE_DEVICE (0x00000002) +#define MPI2_SASIOUNIT0_DS_LOOP_DETECTED (0x00000001) + + +/* SAS IO Unit Page 1 */ + +typedef struct _MPI2_SAS_IO_UNIT1_PHY_DATA +{ + U8 Port; /* 0x00 */ + U8 PortFlags; /* 0x01 */ + U8 PhyFlags; /* 0x02 */ + U8 MaxMinLinkRate; /* 0x03 */ + U32 ControllerPhyDeviceInfo; /* 0x04 */ + U16 MaxTargetPortConnectTime; /* 0x08 */ + U16 Reserved1; /* 0x0A */ +} MPI2_SAS_IO_UNIT1_PHY_DATA, MPI2_POINTER PTR_MPI2_SAS_IO_UNIT1_PHY_DATA, + Mpi2SasIOUnit1PhyData_t, MPI2_POINTER pMpi2SasIOUnit1PhyData_t; + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.ExtPageLength or NumPhys at runtime. + */ +#ifndef MPI2_SAS_IOUNIT1_PHY_MAX +#define MPI2_SAS_IOUNIT1_PHY_MAX (1) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U16 ControlFlags; /* 0x08 */ + U16 SASNarrowMaxQueueDepth; /* 0x0A */ + U16 AdditionalControlFlags; /* 0x0C */ + U16 SASWideMaxQueueDepth; /* 0x0E */ + U8 NumPhys; /* 0x10 */ + U8 SATAMaxQDepth; /* 0x11 */ + U8 ReportDeviceMissingDelay; /* 0x12 */ + U8 IODeviceMissingDelay; /* 0x13 */ + MPI2_SAS_IO_UNIT1_PHY_DATA PhyData[MPI2_SAS_IOUNIT1_PHY_MAX]; /* 0x14 */ +} MPI2_CONFIG_PAGE_SASIOUNIT_1, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_1, + Mpi2SasIOUnitPage1_t, MPI2_POINTER pMpi2SasIOUnitPage1_t; + +#define MPI2_SASIOUNITPAGE1_PAGEVERSION (0x09) + +/* values for SAS IO Unit Page 1 ControlFlags */ +#define MPI2_SASIOUNIT1_CONTROL_DEVICE_SELF_TEST (0x8000) +#define MPI2_SASIOUNIT1_CONTROL_SATA_3_0_MAX (0x4000) +#define MPI2_SASIOUNIT1_CONTROL_SATA_1_5_MAX (0x2000) +#define MPI2_SASIOUNIT1_CONTROL_SATA_SW_PRESERVE (0x1000) + +#define MPI2_SASIOUNIT1_CONTROL_MASK_DEV_SUPPORT (0x0600) +#define MPI2_SASIOUNIT1_CONTROL_SHIFT_DEV_SUPPORT (9) +#define MPI2_SASIOUNIT1_CONTROL_DEV_SUPPORT_BOTH (0x0) +#define MPI2_SASIOUNIT1_CONTROL_DEV_SAS_SUPPORT (0x1) +#define MPI2_SASIOUNIT1_CONTROL_DEV_SATA_SUPPORT (0x2) + +#define MPI2_SASIOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080) +#define MPI2_SASIOUNIT1_CONTROL_SATA_SMART_REQUIRED (0x0040) +#define MPI2_SASIOUNIT1_CONTROL_SATA_NCQ_REQUIRED (0x0020) +#define MPI2_SASIOUNIT1_CONTROL_SATA_FUA_REQUIRED (0x0010) +#define MPI2_SASIOUNIT1_CONTROL_TABLE_SUBTRACTIVE_ILLEGAL (0x0008) +#define MPI2_SASIOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL (0x0004) +#define MPI2_SASIOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY (0x0002) +#define MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001) + +/* values for SAS IO Unit Page 1 AdditionalControlFlags */ +#define MPI2_SASIOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL (0x0080) +#define MPI2_SASIOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION (0x0040) +#define MPI2_SASIOUNIT1_ACONTROL_INVALID_TOPOLOGY_CORRECTION (0x0020) +#define MPI2_SASIOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET (0x0010) +#define MPI2_SASIOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET (0x0008) +#define MPI2_SASIOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET (0x0004) +#define MPI2_SASIOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET (0x0002) +#define MPI2_SASIOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE (0x0001) + +/* defines for SAS IO Unit Page 1 ReportDeviceMissingDelay */ +#define MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK (0x7F) +#define MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16 (0x80) + +/* values for SAS IO Unit Page 1 PortFlags */ +#define MPI2_SASIOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01) + +/* values for SAS IO Unit Page 2 PhyFlags */ +#define MPI2_SASIOUNIT1_PHYFLAGS_ZONING_ENABLE (0x10) +#define MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08) + +/* values for SAS IO Unit Page 0 MaxMinLinkRate */ +#define MPI2_SASIOUNIT1_MAX_RATE_MASK (0xF0) +#define MPI2_SASIOUNIT1_MAX_RATE_1_5 (0x80) +#define MPI2_SASIOUNIT1_MAX_RATE_3_0 (0x90) +#define MPI2_SASIOUNIT1_MAX_RATE_6_0 (0xA0) +#define MPI2_SASIOUNIT1_MIN_RATE_MASK (0x0F) +#define MPI2_SASIOUNIT1_MIN_RATE_1_5 (0x08) +#define MPI2_SASIOUNIT1_MIN_RATE_3_0 (0x09) +#define MPI2_SASIOUNIT1_MIN_RATE_6_0 (0x0A) + +/* see mpi2_sas.h for values for SAS IO Unit Page 1 ControllerPhyDeviceInfo values */ + + +/* SAS IO Unit Page 4 */ + +typedef struct _MPI2_SAS_IOUNIT4_SPINUP_GROUP +{ + U8 MaxTargetSpinup; /* 0x00 */ + U8 SpinupDelay; /* 0x01 */ + U16 Reserved1; /* 0x02 */ +} MPI2_SAS_IOUNIT4_SPINUP_GROUP, MPI2_POINTER PTR_MPI2_SAS_IOUNIT4_SPINUP_GROUP, + Mpi2SasIOUnit4SpinupGroup_t, MPI2_POINTER pMpi2SasIOUnit4SpinupGroup_t; + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * four and check Header.ExtPageLength or NumPhys at runtime. + */ +#ifndef MPI2_SAS_IOUNIT4_PHY_MAX +#define MPI2_SAS_IOUNIT4_PHY_MAX (4) +#endif + +typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_4 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + MPI2_SAS_IOUNIT4_SPINUP_GROUP SpinupGroupParameters[4]; /* 0x08 */ + U32 Reserved1; /* 0x18 */ + U32 Reserved2; /* 0x1C */ + U32 Reserved3; /* 0x20 */ + U8 BootDeviceWaitTime; /* 0x24 */ + U8 Reserved4; /* 0x25 */ + U16 Reserved5; /* 0x26 */ + U8 NumPhys; /* 0x28 */ + U8 PEInitialSpinupDelay; /* 0x29 */ + U8 PEReplyDelay; /* 0x2A */ + U8 Flags; /* 0x2B */ + U8 PHY[MPI2_SAS_IOUNIT4_PHY_MAX]; /* 0x2C */ +} MPI2_CONFIG_PAGE_SASIOUNIT_4, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_4, + Mpi2SasIOUnitPage4_t, MPI2_POINTER pMpi2SasIOUnitPage4_t; + +#define MPI2_SASIOUNITPAGE4_PAGEVERSION (0x02) + +/* defines for Flags field */ +#define MPI2_SASIOUNIT4_FLAGS_AUTO_PORTENABLE (0x01) + +/* defines for PHY field */ +#define MPI2_SASIOUNIT4_PHY_SPINUP_GROUP_MASK (0x03) + + +/**************************************************************************** +* SAS Expander Config Pages +****************************************************************************/ + +/* SAS Expander Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_EXPANDER_0 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U8 PhysicalPort; /* 0x08 */ + U8 ReportGenLength; /* 0x09 */ + U16 EnclosureHandle; /* 0x0A */ + U64 SASAddress; /* 0x0C */ + U32 DiscoveryStatus; /* 0x14 */ + U16 DevHandle; /* 0x18 */ + U16 ParentDevHandle; /* 0x1A */ + U16 ExpanderChangeCount; /* 0x1C */ + U16 ExpanderRouteIndexes; /* 0x1E */ + U8 NumPhys; /* 0x20 */ + U8 SASLevel; /* 0x21 */ + U16 Flags; /* 0x22 */ + U16 STPBusInactivityTimeLimit; /* 0x24 */ + U16 STPMaxConnectTimeLimit; /* 0x26 */ + U16 STP_SMP_NexusLossTime; /* 0x28 */ + U16 MaxNumRoutedSasAddresses; /* 0x2A */ + U64 ActiveZoneManagerSASAddress;/* 0x2C */ + U16 ZoneLockInactivityLimit; /* 0x34 */ + U16 Reserved1; /* 0x36 */ +} MPI2_CONFIG_PAGE_EXPANDER_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXPANDER_0, + Mpi2ExpanderPage0_t, MPI2_POINTER pMpi2ExpanderPage0_t; + +#define MPI2_SASEXPANDER0_PAGEVERSION (0x05) + +/* values for SAS Expander Page 0 DiscoveryStatus field */ +#define MPI2_SAS_EXPANDER0_DS_MAX_ENCLOSURES_EXCEED (0x80000000) +#define MPI2_SAS_EXPANDER0_DS_MAX_EXPANDERS_EXCEED (0x40000000) +#define MPI2_SAS_EXPANDER0_DS_MAX_DEVICES_EXCEED (0x20000000) +#define MPI2_SAS_EXPANDER0_DS_MAX_TOPO_PHYS_EXCEED (0x10000000) +#define MPI2_SAS_EXPANDER0_DS_DOWNSTREAM_INITIATOR (0x08000000) +#define MPI2_SAS_EXPANDER0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000) +#define MPI2_SAS_EXPANDER0_DS_EXP_MULTI_SUBTRACTIVE (0x00004000) +#define MPI2_SAS_EXPANDER0_DS_MULTI_PORT_DOMAIN (0x00002000) +#define MPI2_SAS_EXPANDER0_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000) +#define MPI2_SAS_EXPANDER0_DS_UNSUPPORTED_DEVICE (0x00000800) +#define MPI2_SAS_EXPANDER0_DS_TABLE_LINK (0x00000400) +#define MPI2_SAS_EXPANDER0_DS_SUBTRACTIVE_LINK (0x00000200) +#define MPI2_SAS_EXPANDER0_DS_SMP_CRC_ERROR (0x00000100) +#define MPI2_SAS_EXPANDER0_DS_SMP_FUNCTION_FAILED (0x00000080) +#define MPI2_SAS_EXPANDER0_DS_INDEX_NOT_EXIST (0x00000040) +#define MPI2_SAS_EXPANDER0_DS_OUT_ROUTE_ENTRIES (0x00000020) +#define MPI2_SAS_EXPANDER0_DS_SMP_TIMEOUT (0x00000010) +#define MPI2_SAS_EXPANDER0_DS_MULTIPLE_PORTS (0x00000004) +#define MPI2_SAS_EXPANDER0_DS_UNADDRESSABLE_DEVICE (0x00000002) +#define MPI2_SAS_EXPANDER0_DS_LOOP_DETECTED (0x00000001) + +/* values for SAS Expander Page 0 Flags field */ +#define MPI2_SAS_EXPANDER0_FLAGS_ZONE_LOCKED (0x1000) +#define MPI2_SAS_EXPANDER0_FLAGS_SUPPORTED_PHYSICAL_PRES (0x0800) +#define MPI2_SAS_EXPANDER0_FLAGS_ASSERTED_PHYSICAL_PRES (0x0400) +#define MPI2_SAS_EXPANDER0_FLAGS_ZONING_SUPPORT (0x0200) +#define MPI2_SAS_EXPANDER0_FLAGS_ENABLED_ZONING (0x0100) +#define MPI2_SAS_EXPANDER0_FLAGS_TABLE_TO_TABLE_SUPPORT (0x0080) +#define MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE (0x0010) +#define MPI2_SAS_EXPANDER0_FLAGS_OTHERS_CONFIG (0x0004) +#define MPI2_SAS_EXPANDER0_FLAGS_CONFIG_IN_PROGRESS (0x0002) +#define MPI2_SAS_EXPANDER0_FLAGS_ROUTE_TABLE_CONFIG (0x0001) + + +/* SAS Expander Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_EXPANDER_1 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U8 PhysicalPort; /* 0x08 */ + U8 Reserved1; /* 0x09 */ + U16 Reserved2; /* 0x0A */ + U8 NumPhys; /* 0x0C */ + U8 Phy; /* 0x0D */ + U16 NumTableEntriesProgrammed; /* 0x0E */ + U8 ProgrammedLinkRate; /* 0x10 */ + U8 HwLinkRate; /* 0x11 */ + U16 AttachedDevHandle; /* 0x12 */ + U32 PhyInfo; /* 0x14 */ + U32 AttachedDeviceInfo; /* 0x18 */ + U16 ExpanderDevHandle; /* 0x1C */ + U8 ChangeCount; /* 0x1E */ + U8 NegotiatedLinkRate; /* 0x1F */ + U8 PhyIdentifier; /* 0x20 */ + U8 AttachedPhyIdentifier; /* 0x21 */ + U8 Reserved3; /* 0x22 */ + U8 DiscoveryInfo; /* 0x23 */ + U32 AttachedPhyInfo; /* 0x24 */ + U8 ZoneGroup; /* 0x28 */ + U8 SelfConfigStatus; /* 0x29 */ + U16 Reserved4; /* 0x2A */ +} MPI2_CONFIG_PAGE_EXPANDER_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXPANDER_1, + Mpi2ExpanderPage1_t, MPI2_POINTER pMpi2ExpanderPage1_t; + +#define MPI2_SASEXPANDER1_PAGEVERSION (0x02) + +/* use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */ + +/* use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */ + +/* use MPI2_SAS_PHYINFO_ for the PhyInfo field */ + +/* see mpi2_sas.h for the MPI2_SAS_DEVICE_INFO_ defines used for the AttachedDeviceInfo field */ + +/* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ + +/* use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */ + +/* values for SAS Expander Page 1 DiscoveryInfo field */ +#define MPI2_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED (0x04) +#define MPI2_SAS_EXPANDER1_DISCINFO_LINK_STATUS_CHANGE (0x02) +#define MPI2_SAS_EXPANDER1_DISCINFO_NO_ROUTING_ENTRIES (0x01) + + +/**************************************************************************** +* SAS Device Config Pages +****************************************************************************/ + +/* SAS Device Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U16 Slot; /* 0x08 */ + U16 EnclosureHandle; /* 0x0A */ + U64 SASAddress; /* 0x0C */ + U16 ParentDevHandle; /* 0x14 */ + U8 PhyNum; /* 0x16 */ + U8 AccessStatus; /* 0x17 */ + U16 DevHandle; /* 0x18 */ + U8 AttachedPhyIdentifier; /* 0x1A */ + U8 ZoneGroup; /* 0x1B */ + U32 DeviceInfo; /* 0x1C */ + U16 Flags; /* 0x20 */ + U8 PhysicalPort; /* 0x22 */ + U8 MaxPortConnections; /* 0x23 */ + U64 DeviceName; /* 0x24 */ + U8 PortGroups; /* 0x2C */ + U8 DmaGroup; /* 0x2D */ + U8 ControlGroup; /* 0x2E */ + U8 Reserved1; /* 0x2F */ + U32 Reserved2; /* 0x30 */ + U32 Reserved3; /* 0x34 */ +} MPI2_CONFIG_PAGE_SAS_DEV_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_DEV_0, + Mpi2SasDevicePage0_t, MPI2_POINTER pMpi2SasDevicePage0_t; + +#define MPI2_SASDEVICE0_PAGEVERSION (0x08) + +/* values for SAS Device Page 0 AccessStatus field */ +#define MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS (0x00) +#define MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED (0x01) +#define MPI2_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED (0x02) +#define MPI2_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT (0x03) +#define MPI2_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION (0x04) +#define MPI2_SAS_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE (0x05) +#define MPI2_SAS_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE (0x06) +#define MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED (0x07) +/* specific values for SATA Init failures */ +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN (0x10) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT (0x11) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_DIAG (0x12) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION (0x13) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER (0x14) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_PIO_SN (0x15) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN (0x16) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN (0x17) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION (0x18) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE (0x19) +#define MPI2_SAS_DEVICE0_ASTATUS_SIF_MAX (0x1F) + +/* see mpi2_sas.h for values for SAS Device Page 0 DeviceInfo values */ + +/* values for SAS Device Page 0 Flags field */ +#define MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY (0x0400) +#define MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE (0x0200) +#define MPI2_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE (0x0100) +#define MPI2_SAS_DEVICE0_FLAGS_SATA_48BIT_LBA_SUPPORTED (0x0080) +#define MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED (0x0040) +#define MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED (0x0020) +#define MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED (0x0010) +#define MPI2_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH (0x0008) +#define MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001) + + +/* SAS Device Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_1 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U64 SASAddress; /* 0x0C */ + U32 Reserved2; /* 0x14 */ + U16 DevHandle; /* 0x18 */ + U16 Reserved3; /* 0x1A */ + U8 InitialRegDeviceFIS[20];/* 0x1C */ +} MPI2_CONFIG_PAGE_SAS_DEV_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_DEV_1, + Mpi2SasDevicePage1_t, MPI2_POINTER pMpi2SasDevicePage1_t; + +#define MPI2_SASDEVICE1_PAGEVERSION (0x01) + + +/**************************************************************************** +* SAS PHY Config Pages +****************************************************************************/ + +/* SAS PHY Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_0 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U16 OwnerDevHandle; /* 0x08 */ + U16 Reserved1; /* 0x0A */ + U16 AttachedDevHandle; /* 0x0C */ + U8 AttachedPhyIdentifier; /* 0x0E */ + U8 Reserved2; /* 0x0F */ + U32 AttachedPhyInfo; /* 0x10 */ + U8 ProgrammedLinkRate; /* 0x14 */ + U8 HwLinkRate; /* 0x15 */ + U8 ChangeCount; /* 0x16 */ + U8 Flags; /* 0x17 */ + U32 PhyInfo; /* 0x18 */ + U8 NegotiatedLinkRate; /* 0x1C */ + U8 Reserved3; /* 0x1D */ + U16 Reserved4; /* 0x1E */ +} MPI2_CONFIG_PAGE_SAS_PHY_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_0, + Mpi2SasPhyPage0_t, MPI2_POINTER pMpi2SasPhyPage0_t; + +#define MPI2_SASPHY0_PAGEVERSION (0x03) + +/* use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */ + +/* use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */ + +/* values for SAS PHY Page 0 Flags field */ +#define MPI2_SAS_PHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC (0x01) + +/* use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */ + +/* use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */ + +/* use MPI2_SAS_PHYINFO_ for the PhyInfo field */ + + +/* SAS PHY Page 1 */ + +typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_1 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U32 InvalidDwordCount; /* 0x0C */ + U32 RunningDisparityErrorCount; /* 0x10 */ + U32 LossDwordSynchCount; /* 0x14 */ + U32 PhyResetProblemCount; /* 0x18 */ +} MPI2_CONFIG_PAGE_SAS_PHY_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_1, + Mpi2SasPhyPage1_t, MPI2_POINTER pMpi2SasPhyPage1_t; + +#define MPI2_SASPHY1_PAGEVERSION (0x01) + + +/**************************************************************************** +* SAS Port Config Pages +****************************************************************************/ + +/* SAS Port Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_SAS_PORT_0 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U8 PortNumber; /* 0x08 */ + U8 PhysicalPort; /* 0x09 */ + U8 PortWidth; /* 0x0A */ + U8 PhysicalPortWidth; /* 0x0B */ + U8 ZoneGroup; /* 0x0C */ + U8 Reserved1; /* 0x0D */ + U16 Reserved2; /* 0x0E */ + U64 SASAddress; /* 0x10 */ + U32 DeviceInfo; /* 0x18 */ + U32 Reserved3; /* 0x1C */ + U32 Reserved4; /* 0x20 */ +} MPI2_CONFIG_PAGE_SAS_PORT_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PORT_0, + Mpi2SasPortPage0_t, MPI2_POINTER pMpi2SasPortPage0_t; + +#define MPI2_SASPORT0_PAGEVERSION (0x00) + +/* see mpi2_sas.h for values for SAS Port Page 0 DeviceInfo values */ + + +/**************************************************************************** +* SAS Enclosure Config Pages +****************************************************************************/ + +/* SAS Enclosure Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U64 EnclosureLogicalID; /* 0x0C */ + U16 Flags; /* 0x14 */ + U16 EnclosureHandle; /* 0x16 */ + U16 NumSlots; /* 0x18 */ + U16 StartSlot; /* 0x1A */ + U16 Reserved2; /* 0x1C */ + U16 SEPDevHandle; /* 0x1E */ + U32 Reserved3; /* 0x20 */ + U32 Reserved4; /* 0x24 */ +} MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0, + Mpi2SasEnclosurePage0_t, MPI2_POINTER pMpi2SasEnclosurePage0_t; + +#define MPI2_SASENCLOSURE0_PAGEVERSION (0x03) + +/* values for SAS Enclosure Page 0 Flags field */ +#define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK (0x000F) +#define MPI2_SAS_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000) +#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SES (0x0001) +#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SGPIO (0x0002) +#define MPI2_SAS_ENCLS0_FLAGS_MNG_EXP_SGPIO (0x0003) +#define MPI2_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0004) +#define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO (0x0005) + + +/**************************************************************************** +* Log Config Page +****************************************************************************/ + +/* Log Page 0 */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.ExtPageLength or NumPhys at runtime. + */ +#ifndef MPI2_LOG_0_NUM_LOG_ENTRIES +#define MPI2_LOG_0_NUM_LOG_ENTRIES (1) +#endif + +#define MPI2_LOG_0_LOG_DATA_LENGTH (0x1C) + +typedef struct _MPI2_LOG_0_ENTRY +{ + U64 TimeStamp; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U16 LogSequence; /* 0x0C */ + U16 LogEntryQualifier; /* 0x0E */ + U8 VP_ID; /* 0x10 */ + U8 VF_ID; /* 0x11 */ + U16 Reserved2; /* 0x12 */ + U8 LogData[MPI2_LOG_0_LOG_DATA_LENGTH];/* 0x14 */ +} MPI2_LOG_0_ENTRY, MPI2_POINTER PTR_MPI2_LOG_0_ENTRY, + Mpi2Log0Entry_t, MPI2_POINTER pMpi2Log0Entry_t; + +/* values for Log Page 0 LogEntry LogEntryQualifier field */ +#define MPI2_LOG_0_ENTRY_QUAL_ENTRY_UNUSED (0x0000) +#define MPI2_LOG_0_ENTRY_QUAL_POWER_ON_RESET (0x0001) +#define MPI2_LOG_0_ENTRY_QUAL_TIMESTAMP_UPDATE (0x0002) +#define MPI2_LOG_0_ENTRY_QUAL_MIN_IMPLEMENT_SPEC (0x8000) +#define MPI2_LOG_0_ENTRY_QUAL_MAX_IMPLEMENT_SPEC (0xFFFF) + +typedef struct _MPI2_CONFIG_PAGE_LOG_0 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U32 Reserved2; /* 0x0C */ + U16 NumLogEntries; /* 0x10 */ + U16 Reserved3; /* 0x12 */ + MPI2_LOG_0_ENTRY LogEntry[MPI2_LOG_0_NUM_LOG_ENTRIES]; /* 0x14 */ +} MPI2_CONFIG_PAGE_LOG_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_LOG_0, + Mpi2LogPage0_t, MPI2_POINTER pMpi2LogPage0_t; + +#define MPI2_LOG_0_PAGEVERSION (0x02) + + +/**************************************************************************** +* RAID Config Page +****************************************************************************/ + +/* RAID Page 0 */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check Header.ExtPageLength or NumPhys at runtime. + */ +#ifndef MPI2_RAIDCONFIG0_MAX_ELEMENTS +#define MPI2_RAIDCONFIG0_MAX_ELEMENTS (1) +#endif + +typedef struct _MPI2_RAIDCONFIG0_CONFIG_ELEMENT +{ + U16 ElementFlags; /* 0x00 */ + U16 VolDevHandle; /* 0x02 */ + U8 HotSparePool; /* 0x04 */ + U8 PhysDiskNum; /* 0x05 */ + U16 PhysDiskDevHandle; /* 0x06 */ +} MPI2_RAIDCONFIG0_CONFIG_ELEMENT, + MPI2_POINTER PTR_MPI2_RAIDCONFIG0_CONFIG_ELEMENT, + Mpi2RaidConfig0ConfigElement_t, MPI2_POINTER pMpi2RaidConfig0ConfigElement_t; + +/* values for the ElementFlags field */ +#define MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE (0x000F) +#define MPI2_RAIDCONFIG0_EFLAGS_VOLUME_ELEMENT (0x0000) +#define MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT (0x0001) +#define MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT (0x0002) +#define MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT (0x0003) + + +typedef struct _MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + U8 NumHotSpares; /* 0x08 */ + U8 NumPhysDisks; /* 0x09 */ + U8 NumVolumes; /* 0x0A */ + U8 ConfigNum; /* 0x0B */ + U32 Flags; /* 0x0C */ + U8 ConfigGUID[24]; /* 0x10 */ + U32 Reserved1; /* 0x28 */ + U8 NumElements; /* 0x2C */ + U8 Reserved2; /* 0x2D */ + U16 Reserved3; /* 0x2E */ + MPI2_RAIDCONFIG0_CONFIG_ELEMENT ConfigElement[MPI2_RAIDCONFIG0_MAX_ELEMENTS]; /* 0x30 */ +} MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0, + Mpi2RaidConfigurationPage0_t, MPI2_POINTER pMpi2RaidConfigurationPage0_t; + +#define MPI2_RAIDCONFIG0_PAGEVERSION (0x00) + +/* values for RAID Configuration Page 0 Flags field */ +#define MPI2_RAIDCONFIG0_FLAG_FOREIGN_CONFIG (0x00000001) + + +/**************************************************************************** +* Driver Persistent Mapping Config Pages +****************************************************************************/ + +/* Driver Persistent Mapping Page 0 */ + +typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY +{ + U64 PhysicalIdentifier; /* 0x00 */ + U16 MappingInformation; /* 0x08 */ + U16 DeviceIndex; /* 0x0A */ + U32 PhysicalBitsMapping; /* 0x0C */ + U32 Reserved1; /* 0x10 */ +} MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY, + Mpi2DriverMap0Entry_t, MPI2_POINTER pMpi2DriverMap0Entry_t; + +typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAPPING_0 +{ + MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */ + MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY Entry; /* 0x08 */ +} MPI2_CONFIG_PAGE_DRIVER_MAPPING_0, + MPI2_POINTER PTR_MPI2_CONFIG_PAGE_DRIVER_MAPPING_0, + Mpi2DriverMappingPage0_t, MPI2_POINTER pMpi2DriverMappingPage0_t; + +#define MPI2_DRIVERMAPPING0_PAGEVERSION (0x00) + +/* values for Driver Persistent Mapping Page 0 MappingInformation field */ +#define MPI2_DRVMAP0_MAPINFO_SLOT_MASK (0x07F0) +#define MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT (4) +#define MPI2_DRVMAP0_MAPINFO_MISSING_MASK (0x000F) + + +#endif + diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_init.h b/drivers/scsi/mpt2sas/mpi/mpi2_init.h new file mode 100644 index 00000000000..f1115f0f0eb --- /dev/null +++ b/drivers/scsi/mpt2sas/mpi/mpi2_init.h @@ -0,0 +1,420 @@ +/* + * Copyright (c) 2000-2008 LSI Corporation. + * + * + * Name: mpi2_init.h + * Title: MPI SCSI initiator mode messages and structures + * Creation Date: June 23, 2006 + * + * mpi2_init.h Version: 02.00.06 + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 10-31-07 02.00.01 Fixed name for pMpi2SCSITaskManagementRequest_t. + * 12-18-07 02.00.02 Modified Task Management Target Reset Method defines. + * 02-29-08 02.00.03 Added Query Task Set and Query Unit Attention. + * 03-03-08 02.00.04 Fixed name of struct _MPI2_SCSI_TASK_MANAGE_REPLY. + * 05-21-08 02.00.05 Fixed typo in name of Mpi2SepRequest_t. + * 10-02-08 02.00.06 Removed Untagged and No Disconnect values from SCSI IO + * Control field Task Attribute flags. + * Moved LUN field defines to mpi2.h becasue they are + * common to many structures. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_INIT_H +#define MPI2_INIT_H + +/***************************************************************************** +* +* SCSI Initiator Messages +* +*****************************************************************************/ + +/**************************************************************************** +* SCSI IO messages and associated structures +****************************************************************************/ + +typedef struct +{ + U8 CDB[20]; /* 0x00 */ + U32 PrimaryReferenceTag; /* 0x14 */ + U16 PrimaryApplicationTag; /* 0x18 */ + U16 PrimaryApplicationTagMask; /* 0x1A */ + U32 TransferLength; /* 0x1C */ +} MPI2_SCSI_IO_CDB_EEDP32, MPI2_POINTER PTR_MPI2_SCSI_IO_CDB_EEDP32, + Mpi2ScsiIoCdbEedp32_t, MPI2_POINTER pMpi2ScsiIoCdbEedp32_t; + +/* TBD: I don't think this is needed for MPI2/Gen2 */ +#if 0 +typedef struct +{ + U8 CDB[16]; /* 0x00 */ + U32 DataLength; /* 0x10 */ + U32 PrimaryReferenceTag; /* 0x14 */ + U16 PrimaryApplicationTag; /* 0x18 */ + U16 PrimaryApplicationTagMask; /* 0x1A */ + U32 TransferLength; /* 0x1C */ +} MPI2_SCSI_IO32_CDB_EEDP16, MPI2_POINTER PTR_MPI2_SCSI_IO32_CDB_EEDP16, + Mpi2ScsiIo32CdbEedp16_t, MPI2_POINTER pMpi2ScsiIo32CdbEedp16_t; +#endif + +typedef union +{ + U8 CDB32[32]; + MPI2_SCSI_IO_CDB_EEDP32 EEDP32; + MPI2_SGE_SIMPLE_UNION SGE; +} MPI2_SCSI_IO_CDB_UNION, MPI2_POINTER PTR_MPI2_SCSI_IO_CDB_UNION, + Mpi2ScsiIoCdb_t, MPI2_POINTER pMpi2ScsiIoCdb_t; + +/* SCSI IO Request Message */ +typedef struct _MPI2_SCSI_IO_REQUEST +{ + U16 DevHandle; /* 0x00 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved1; /* 0x04 */ + U8 Reserved2; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved3; /* 0x0A */ + U32 SenseBufferLowAddress; /* 0x0C */ + U16 SGLFlags; /* 0x10 */ + U8 SenseBufferLength; /* 0x12 */ + U8 Reserved4; /* 0x13 */ + U8 SGLOffset0; /* 0x14 */ + U8 SGLOffset1; /* 0x15 */ + U8 SGLOffset2; /* 0x16 */ + U8 SGLOffset3; /* 0x17 */ + U32 SkipCount; /* 0x18 */ + U32 DataLength; /* 0x1C */ + U32 BidirectionalDataLength; /* 0x20 */ + U16 IoFlags; /* 0x24 */ + U16 EEDPFlags; /* 0x26 */ + U32 EEDPBlockSize; /* 0x28 */ + U32 SecondaryReferenceTag; /* 0x2C */ + U16 SecondaryApplicationTag; /* 0x30 */ + U16 ApplicationTagTranslationMask; /* 0x32 */ + U8 LUN[8]; /* 0x34 */ + U32 Control; /* 0x3C */ + MPI2_SCSI_IO_CDB_UNION CDB; /* 0x40 */ + MPI2_SGE_IO_UNION SGL; /* 0x60 */ +} MPI2_SCSI_IO_REQUEST, MPI2_POINTER PTR_MPI2_SCSI_IO_REQUEST, + Mpi2SCSIIORequest_t, MPI2_POINTER pMpi2SCSIIORequest_t; + +/* SCSI IO MsgFlags bits */ + +/* MsgFlags for SenseBufferAddressSpace */ +#define MPI2_SCSIIO_MSGFLAGS_MASK_SENSE_ADDR (0x0C) +#define MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR (0x00) +#define MPI2_SCSIIO_MSGFLAGS_IOCDDR_SENSE_ADDR (0x04) +#define MPI2_SCSIIO_MSGFLAGS_IOCPLB_SENSE_ADDR (0x08) +#define MPI2_SCSIIO_MSGFLAGS_IOCPLBNTA_SENSE_ADDR (0x0C) + +/* SCSI IO SGLFlags bits */ + +/* base values for Data Location Address Space */ +#define MPI2_SCSIIO_SGLFLAGS_ADDR_MASK (0x0C) +#define MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR (0x00) +#define MPI2_SCSIIO_SGLFLAGS_IOCDDR_ADDR (0x04) +#define MPI2_SCSIIO_SGLFLAGS_IOCPLB_ADDR (0x08) +#define MPI2_SCSIIO_SGLFLAGS_IOCPLBNTA_ADDR (0x0C) + +/* base values for Type */ +#define MPI2_SCSIIO_SGLFLAGS_TYPE_MASK (0x03) +#define MPI2_SCSIIO_SGLFLAGS_TYPE_MPI (0x00) +#define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE32 (0x01) +#define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE64 (0x02) + +/* shift values for each sub-field */ +#define MPI2_SCSIIO_SGLFLAGS_SGL3_SHIFT (12) +#define MPI2_SCSIIO_SGLFLAGS_SGL2_SHIFT (8) +#define MPI2_SCSIIO_SGLFLAGS_SGL1_SHIFT (4) +#define MPI2_SCSIIO_SGLFLAGS_SGL0_SHIFT (0) + +/* SCSI IO IoFlags bits */ + +/* Large CDB Address Space */ +#define MPI2_SCSIIO_CDB_ADDR_MASK (0x6000) +#define MPI2_SCSIIO_CDB_ADDR_SYSTEM (0x0000) +#define MPI2_SCSIIO_CDB_ADDR_IOCDDR (0x2000) +#define MPI2_SCSIIO_CDB_ADDR_IOCPLB (0x4000) +#define MPI2_SCSIIO_CDB_ADDR_IOCPLBNTA (0x6000) + +#define MPI2_SCSIIO_IOFLAGS_LARGE_CDB (0x1000) +#define MPI2_SCSIIO_IOFLAGS_BIDIRECTIONAL (0x0800) +#define MPI2_SCSIIO_IOFLAGS_MULTICAST (0x0400) +#define MPI2_SCSIIO_IOFLAGS_CMD_DETERMINES_DATA_DIR (0x0200) +#define MPI2_SCSIIO_IOFLAGS_CDBLENGTH_MASK (0x01FF) + +/* SCSI IO EEDPFlags bits */ + +#define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG (0x8000) +#define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_REFTAG (0x4000) +#define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_APPTAG (0x2000) +#define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_APPTAG (0x1000) + +#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG (0x0400) +#define MPI2_SCSIIO_EEDPFLAGS_CHECK_APPTAG (0x0200) +#define MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD (0x0100) + +#define MPI2_SCSIIO_EEDPFLAGS_PASSTHRU_REFTAG (0x0008) + +#define MPI2_SCSIIO_EEDPFLAGS_MASK_OP (0x0007) +#define MPI2_SCSIIO_EEDPFLAGS_NOOP_OP (0x0000) +#define MPI2_SCSIIO_EEDPFLAGS_CHECK_OP (0x0001) +#define MPI2_SCSIIO_EEDPFLAGS_STRIP_OP (0x0002) +#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP (0x0003) +#define MPI2_SCSIIO_EEDPFLAGS_INSERT_OP (0x0004) +#define MPI2_SCSIIO_EEDPFLAGS_REPLACE_OP (0x0006) +#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REGEN_OP (0x0007) + +/* SCSI IO LUN fields: use MPI2_LUN_ from mpi2.h */ + +/* SCSI IO Control bits */ +#define MPI2_SCSIIO_CONTROL_ADDCDBLEN_MASK (0xFC000000) +#define MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT (26) + +#define MPI2_SCSIIO_CONTROL_DATADIRECTION_MASK (0x03000000) +#define MPI2_SCSIIO_CONTROL_NODATATRANSFER (0x00000000) +#define MPI2_SCSIIO_CONTROL_WRITE (0x01000000) +#define MPI2_SCSIIO_CONTROL_READ (0x02000000) +#define MPI2_SCSIIO_CONTROL_BIDIRECTIONAL (0x03000000) + +#define MPI2_SCSIIO_CONTROL_TASKPRI_MASK (0x00007800) +#define MPI2_SCSIIO_CONTROL_TASKPRI_SHIFT (11) + +#define MPI2_SCSIIO_CONTROL_TASKATTRIBUTE_MASK (0x00000700) +#define MPI2_SCSIIO_CONTROL_SIMPLEQ (0x00000000) +#define MPI2_SCSIIO_CONTROL_HEADOFQ (0x00000100) +#define MPI2_SCSIIO_CONTROL_ORDEREDQ (0x00000200) +#define MPI2_SCSIIO_CONTROL_ACAQ (0x00000400) + +#define MPI2_SCSIIO_CONTROL_TLR_MASK (0x000000C0) +#define MPI2_SCSIIO_CONTROL_NO_TLR (0x00000000) +#define MPI2_SCSIIO_CONTROL_TLR_ON (0x00000040) +#define MPI2_SCSIIO_CONTROL_TLR_OFF (0x00000080) + + +/* SCSI IO Error Reply Message */ +typedef struct _MPI2_SCSI_IO_REPLY +{ + U16 DevHandle; /* 0x00 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved1; /* 0x04 */ + U8 Reserved2; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved3; /* 0x0A */ + U8 SCSIStatus; /* 0x0C */ + U8 SCSIState; /* 0x0D */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + U32 TransferCount; /* 0x14 */ + U32 SenseCount; /* 0x18 */ + U32 ResponseInfo; /* 0x1C */ + U16 TaskTag; /* 0x20 */ + U16 Reserved4; /* 0x22 */ + U32 BidirectionalTransferCount; /* 0x24 */ + U32 Reserved5; /* 0x28 */ + U32 Reserved6; /* 0x2C */ +} MPI2_SCSI_IO_REPLY, MPI2_POINTER PTR_MPI2_SCSI_IO_REPLY, + Mpi2SCSIIOReply_t, MPI2_POINTER pMpi2SCSIIOReply_t; + +/* SCSI IO Reply SCSIStatus values (SAM-4 status codes) */ + +#define MPI2_SCSI_STATUS_GOOD (0x00) +#define MPI2_SCSI_STATUS_CHECK_CONDITION (0x02) +#define MPI2_SCSI_STATUS_CONDITION_MET (0x04) +#define MPI2_SCSI_STATUS_BUSY (0x08) +#define MPI2_SCSI_STATUS_INTERMEDIATE (0x10) +#define MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET (0x14) +#define MPI2_SCSI_STATUS_RESERVATION_CONFLICT (0x18) +#define MPI2_SCSI_STATUS_COMMAND_TERMINATED (0x22) /* obsolete */ +#define MPI2_SCSI_STATUS_TASK_SET_FULL (0x28) +#define MPI2_SCSI_STATUS_ACA_ACTIVE (0x30) +#define MPI2_SCSI_STATUS_TASK_ABORTED (0x40) + +/* SCSI IO Reply SCSIState flags */ + +#define MPI2_SCSI_STATE_RESPONSE_INFO_VALID (0x10) +#define MPI2_SCSI_STATE_TERMINATED (0x08) +#define MPI2_SCSI_STATE_NO_SCSI_STATUS (0x04) +#define MPI2_SCSI_STATE_AUTOSENSE_FAILED (0x02) +#define MPI2_SCSI_STATE_AUTOSENSE_VALID (0x01) + +#define MPI2_SCSI_TASKTAG_UNKNOWN (0xFFFF) + + +/**************************************************************************** +* SCSI Task Management messages +****************************************************************************/ + +/* SCSI Task Management Request Message */ +typedef struct _MPI2_SCSI_TASK_MANAGE_REQUEST +{ + U16 DevHandle; /* 0x00 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U8 Reserved1; /* 0x04 */ + U8 TaskType; /* 0x05 */ + U8 Reserved2; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved3; /* 0x0A */ + U8 LUN[8]; /* 0x0C */ + U32 Reserved4[7]; /* 0x14 */ + U16 TaskMID; /* 0x30 */ + U16 Reserved5; /* 0x32 */ +} MPI2_SCSI_TASK_MANAGE_REQUEST, + MPI2_POINTER PTR_MPI2_SCSI_TASK_MANAGE_REQUEST, + Mpi2SCSITaskManagementRequest_t, + MPI2_POINTER pMpi2SCSITaskManagementRequest_t; + +/* TaskType values */ + +#define MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK (0x01) +#define MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET (0x02) +#define MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET (0x03) +#define MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05) +#define MPI2_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06) +#define MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07) +#define MPI2_SCSITASKMGMT_TASKTYPE_CLR_ACA (0x08) +#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_TASK_SET (0x09) +#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_UNIT_ATTENTION (0x0A) + +/* MsgFlags bits */ + +#define MPI2_SCSITASKMGMT_MSGFLAGS_MASK_TARGET_RESET (0x18) +#define MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET (0x00) +#define MPI2_SCSITASKMGMT_MSGFLAGS_NEXUS_RESET_SRST (0x08) +#define MPI2_SCSITASKMGMT_MSGFLAGS_SAS_HARD_LINK_RESET (0x10) + +#define MPI2_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU (0x01) + + + +/* SCSI Task Management Reply Message */ +typedef struct _MPI2_SCSI_TASK_MANAGE_REPLY +{ + U16 DevHandle; /* 0x00 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U8 ResponseCode; /* 0x04 */ + U8 TaskType; /* 0x05 */ + U8 Reserved1; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved2; /* 0x0A */ + U16 Reserved3; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + U32 TerminationCount; /* 0x14 */ +} MPI2_SCSI_TASK_MANAGE_REPLY, + MPI2_POINTER PTR_MPI2_SCSI_TASK_MANAGE_REPLY, + Mpi2SCSITaskManagementReply_t, MPI2_POINTER pMpi2SCSIManagementReply_t; + +/* ResponseCode values */ + +#define MPI2_SCSITASKMGMT_RSP_TM_COMPLETE (0x00) +#define MPI2_SCSITASKMGMT_RSP_INVALID_FRAME (0x02) +#define MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED (0x04) +#define MPI2_SCSITASKMGMT_RSP_TM_FAILED (0x05) +#define MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED (0x08) +#define MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN (0x09) +#define MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC (0x80) + + +/**************************************************************************** +* SCSI Enclosure Processor messages +****************************************************************************/ + +/* SCSI Enclosure Processor Request Message */ +typedef struct _MPI2_SEP_REQUEST +{ + U16 DevHandle; /* 0x00 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U8 Action; /* 0x04 */ + U8 Flags; /* 0x05 */ + U8 Reserved1; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved2; /* 0x0A */ + U32 SlotStatus; /* 0x0C */ + U32 Reserved3; /* 0x10 */ + U32 Reserved4; /* 0x14 */ + U32 Reserved5; /* 0x18 */ + U16 Slot; /* 0x1C */ + U16 EnclosureHandle; /* 0x1E */ +} MPI2_SEP_REQUEST, MPI2_POINTER PTR_MPI2_SEP_REQUEST, + Mpi2SepRequest_t, MPI2_POINTER pMpi2SepRequest_t; + +/* Action defines */ +#define MPI2_SEP_REQ_ACTION_WRITE_STATUS (0x00) +#define MPI2_SEP_REQ_ACTION_READ_STATUS (0x01) + +/* Flags defines */ +#define MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS (0x00) +#define MPI2_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS (0x01) + +/* SlotStatus defines */ +#define MPI2_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE (0x00040000) +#define MPI2_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000) +#define MPI2_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED (0x00000200) +#define MPI2_SEP_REQ_SLOTSTATUS_HOT_SPARE (0x00000100) +#define MPI2_SEP_REQ_SLOTSTATUS_UNCONFIGURED (0x00000080) +#define MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT (0x00000040) +#define MPI2_SEP_REQ_SLOTSTATUS_DEV_REBUILDING (0x00000004) +#define MPI2_SEP_REQ_SLOTSTATUS_DEV_FAULTY (0x00000002) +#define MPI2_SEP_REQ_SLOTSTATUS_NO_ERROR (0x00000001) + + +/* SCSI Enclosure Processor Reply Message */ +typedef struct _MPI2_SEP_REPLY +{ + U16 DevHandle; /* 0x00 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U8 Action; /* 0x04 */ + U8 Flags; /* 0x05 */ + U8 Reserved1; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved2; /* 0x0A */ + U16 Reserved3; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + U32 SlotStatus; /* 0x14 */ + U32 Reserved4; /* 0x18 */ + U16 Slot; /* 0x1C */ + U16 EnclosureHandle; /* 0x1E */ +} MPI2_SEP_REPLY, MPI2_POINTER PTR_MPI2_SEP_REPLY, + Mpi2SepReply_t, MPI2_POINTER pMpi2SepReply_t; + +/* SlotStatus defines */ +#define MPI2_SEP_REPLY_SLOTSTATUS_REMOVE_READY (0x00040000) +#define MPI2_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000) +#define MPI2_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED (0x00000200) +#define MPI2_SEP_REPLY_SLOTSTATUS_HOT_SPARE (0x00000100) +#define MPI2_SEP_REPLY_SLOTSTATUS_UNCONFIGURED (0x00000080) +#define MPI2_SEP_REPLY_SLOTSTATUS_PREDICTED_FAULT (0x00000040) +#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_REBUILDING (0x00000004) +#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_FAULTY (0x00000002) +#define MPI2_SEP_REPLY_SLOTSTATUS_NO_ERROR (0x00000001) + + +#endif + + diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h new file mode 100644 index 00000000000..8c5d81870c0 --- /dev/null +++ b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h @@ -0,0 +1,1295 @@ +/* + * Copyright (c) 2000-2009 LSI Corporation. + * + * + * Name: mpi2_ioc.h + * Title: MPI IOC, Port, Event, FW Download, and FW Upload messages + * Creation Date: October 11, 2006 + * + * mpi2_ioc.h Version: 02.00.10 + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 06-04-07 02.00.01 In IOCFacts Reply structure, renamed MaxDevices to + * MaxTargets. + * Added TotalImageSize field to FWDownload Request. + * Added reserved words to FWUpload Request. + * 06-26-07 02.00.02 Added IR Configuration Change List Event. + * 08-31-07 02.00.03 Removed SystemReplyQueueDepth field from the IOCInit + * request and replaced it with + * ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth. + * Replaced the MinReplyQueueDepth field of the IOCFacts + * reply with MaxReplyDescriptorPostQueueDepth. + * Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum + * depth for the Reply Descriptor Post Queue. + * Added SASAddress field to Initiator Device Table + * Overflow Event data. + * 10-31-07 02.00.04 Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING + * for SAS Initiator Device Status Change Event data. + * Modified Reason Code defines for SAS Topology Change + * List Event data, including adding a bit for PHY Vacant + * status, and adding a mask for the Reason Code. + * Added define for + * MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING. + * Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID. + * 12-18-07 02.00.05 Added Boot Status defines for the IOCExceptions field of + * the IOCFacts Reply. + * Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define. + * Moved MPI2_VERSION_UNION to mpi2.h. + * Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks + * instead of enables, and added SASBroadcastPrimitiveMasks + * field. + * Added Log Entry Added Event and related structure. + * 02-29-08 02.00.06 Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID. + * Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET. + * Added MaxVolumes and MaxPersistentEntries fields to + * IOCFacts reply. + * Added ProtocalFlags and IOCCapabilities fields to + * MPI2_FW_IMAGE_HEADER. + * Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT. + * 03-03-08 02.00.07 Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to + * a U16 (from a U32). + * Removed extra 's' from EventMasks name. + * 06-27-08 02.00.08 Fixed an offset in a comment. + * 10-02-08 02.00.09 Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST. + * Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and + * renamed MinReplyFrameSize to ReplyFrameSize. + * Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX. + * Added two new RAIDOperation values for Integrated RAID + * Operations Status Event data. + * Added four new IR Configuration Change List Event data + * ReasonCode values. + * Added two new ReasonCode defines for SAS Device Status + * Change Event data. + * Added three new DiscoveryStatus bits for the SAS + * Discovery event data. + * Added Multiplexing Status Change bit to the PhyStatus + * field of the SAS Topology Change List event data. + * Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY. + * BootFlags are now product-specific. + * Added defines for the indivdual signature bytes + * for MPI2_INIT_IMAGE_FOOTER. + * 01-19-09 02.00.10 Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define. + * Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR + * define. + * Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE + * define. + * Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_IOC_H +#define MPI2_IOC_H + +/***************************************************************************** +* +* IOC Messages +* +*****************************************************************************/ + +/**************************************************************************** +* IOCInit message +****************************************************************************/ + +/* IOCInit Request message */ +typedef struct _MPI2_IOC_INIT_REQUEST +{ + U8 WhoInit; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 MsgVersion; /* 0x0C */ + U16 HeaderVersion; /* 0x0E */ + U32 Reserved5; /* 0x10 */ + U32 Reserved6; /* 0x14 */ + U16 Reserved7; /* 0x18 */ + U16 SystemRequestFrameSize; /* 0x1A */ + U16 ReplyDescriptorPostQueueDepth; /* 0x1C */ + U16 ReplyFreeQueueDepth; /* 0x1E */ + U32 SenseBufferAddressHigh; /* 0x20 */ + U32 SystemReplyAddressHigh; /* 0x24 */ + U64 SystemRequestFrameBaseAddress; /* 0x28 */ + U64 ReplyDescriptorPostQueueAddress;/* 0x30 */ + U64 ReplyFreeQueueAddress; /* 0x38 */ + U64 TimeStamp; /* 0x40 */ +} MPI2_IOC_INIT_REQUEST, MPI2_POINTER PTR_MPI2_IOC_INIT_REQUEST, + Mpi2IOCInitRequest_t, MPI2_POINTER pMpi2IOCInitRequest_t; + +/* WhoInit values */ +#define MPI2_WHOINIT_NOT_INITIALIZED (0x00) +#define MPI2_WHOINIT_SYSTEM_BIOS (0x01) +#define MPI2_WHOINIT_ROM_BIOS (0x02) +#define MPI2_WHOINIT_PCI_PEER (0x03) +#define MPI2_WHOINIT_HOST_DRIVER (0x04) +#define MPI2_WHOINIT_MANUFACTURER (0x05) + +/* MsgVersion */ +#define MPI2_IOCINIT_MSGVERSION_MAJOR_MASK (0xFF00) +#define MPI2_IOCINIT_MSGVERSION_MAJOR_SHIFT (8) +#define MPI2_IOCINIT_MSGVERSION_MINOR_MASK (0x00FF) +#define MPI2_IOCINIT_MSGVERSION_MINOR_SHIFT (0) + +/* HeaderVersion */ +#define MPI2_IOCINIT_HDRVERSION_UNIT_MASK (0xFF00) +#define MPI2_IOCINIT_HDRVERSION_UNIT_SHIFT (8) +#define MPI2_IOCINIT_HDRVERSION_DEV_MASK (0x00FF) +#define MPI2_IOCINIT_HDRVERSION_DEV_SHIFT (0) + +/* minimum depth for the Reply Descriptor Post Queue */ +#define MPI2_RDPQ_DEPTH_MIN (16) + + +/* IOCInit Reply message */ +typedef struct _MPI2_IOC_INIT_REPLY +{ + U8 WhoInit; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 Reserved5; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ +} MPI2_IOC_INIT_REPLY, MPI2_POINTER PTR_MPI2_IOC_INIT_REPLY, + Mpi2IOCInitReply_t, MPI2_POINTER pMpi2IOCInitReply_t; + + +/**************************************************************************** +* IOCFacts message +****************************************************************************/ + +/* IOCFacts Request message */ +typedef struct _MPI2_IOC_FACTS_REQUEST +{ + U16 Reserved1; /* 0x00 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ +} MPI2_IOC_FACTS_REQUEST, MPI2_POINTER PTR_MPI2_IOC_FACTS_REQUEST, + Mpi2IOCFactsRequest_t, MPI2_POINTER pMpi2IOCFactsRequest_t; + + +/* IOCFacts Reply message */ +typedef struct _MPI2_IOC_FACTS_REPLY +{ + U16 MsgVersion; /* 0x00 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 HeaderVersion; /* 0x04 */ + U8 IOCNumber; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved1; /* 0x0A */ + U16 IOCExceptions; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + U8 MaxChainDepth; /* 0x14 */ + U8 WhoInit; /* 0x15 */ + U8 NumberOfPorts; /* 0x16 */ + U8 Reserved2; /* 0x17 */ + U16 RequestCredit; /* 0x18 */ + U16 ProductID; /* 0x1A */ + U32 IOCCapabilities; /* 0x1C */ + MPI2_VERSION_UNION FWVersion; /* 0x20 */ + U16 IOCRequestFrameSize; /* 0x24 */ + U16 Reserved3; /* 0x26 */ + U16 MaxInitiators; /* 0x28 */ + U16 MaxTargets; /* 0x2A */ + U16 MaxSasExpanders; /* 0x2C */ + U16 MaxEnclosures; /* 0x2E */ + U16 ProtocolFlags; /* 0x30 */ + U16 HighPriorityCredit; /* 0x32 */ + U16 MaxReplyDescriptorPostQueueDepth; /* 0x34 */ + U8 ReplyFrameSize; /* 0x36 */ + U8 MaxVolumes; /* 0x37 */ + U16 MaxDevHandle; /* 0x38 */ + U16 MaxPersistentEntries; /* 0x3A */ + U32 Reserved4; /* 0x3C */ +} MPI2_IOC_FACTS_REPLY, MPI2_POINTER PTR_MPI2_IOC_FACTS_REPLY, + Mpi2IOCFactsReply_t, MPI2_POINTER pMpi2IOCFactsReply_t; + +/* MsgVersion */ +#define MPI2_IOCFACTS_MSGVERSION_MAJOR_MASK (0xFF00) +#define MPI2_IOCFACTS_MSGVERSION_MAJOR_SHIFT (8) +#define MPI2_IOCFACTS_MSGVERSION_MINOR_MASK (0x00FF) +#define MPI2_IOCFACTS_MSGVERSION_MINOR_SHIFT (0) + +/* HeaderVersion */ +#define MPI2_IOCFACTS_HDRVERSION_UNIT_MASK (0xFF00) +#define MPI2_IOCFACTS_HDRVERSION_UNIT_SHIFT (8) +#define MPI2_IOCFACTS_HDRVERSION_DEV_MASK (0x00FF) +#define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT (0) + +/* IOCExceptions */ +#define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX (0x0100) + +#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_MASK (0x00E0) +#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_GOOD (0x0000) +#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_BACKUP (0x0020) +#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_RESTORED (0x0040) +#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_CORRUPT_BACKUP (0x0060) + +#define MPI2_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED (0x0010) +#define MPI2_IOCFACTS_EXCEPT_MANUFACT_CHECKSUM_FAIL (0x0008) +#define MPI2_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0004) +#define MPI2_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID (0x0002) +#define MPI2_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0001) + +/* defines for WhoInit field are after the IOCInit Request */ + +/* ProductID field uses MPI2_FW_HEADER_PID_ */ + +/* IOCCapabilities */ +#define MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY (0x00002000) +#define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID (0x00001000) +#define MPI2_IOCFACTS_CAPABILITY_TLR (0x00000800) +#define MPI2_IOCFACTS_CAPABILITY_MULTICAST (0x00000100) +#define MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET (0x00000080) +#define MPI2_IOCFACTS_CAPABILITY_EEDP (0x00000040) +#define MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER (0x00000010) +#define MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER (0x00000008) +#define MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING (0x00000004) + +/* ProtocolFlags */ +#define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001) +#define MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002) + + +/**************************************************************************** +* PortFacts message +****************************************************************************/ + +/* PortFacts Request message */ +typedef struct _MPI2_PORT_FACTS_REQUEST +{ + U16 Reserved1; /* 0x00 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 PortNumber; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved3; /* 0x0A */ +} MPI2_PORT_FACTS_REQUEST, MPI2_POINTER PTR_MPI2_PORT_FACTS_REQUEST, + Mpi2PortFactsRequest_t, MPI2_POINTER pMpi2PortFactsRequest_t; + +/* PortFacts Reply message */ +typedef struct _MPI2_PORT_FACTS_REPLY +{ + U16 Reserved1; /* 0x00 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 PortNumber; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved3; /* 0x0A */ + U16 Reserved4; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + U8 Reserved5; /* 0x14 */ + U8 PortType; /* 0x15 */ + U16 Reserved6; /* 0x16 */ + U16 MaxPostedCmdBuffers; /* 0x18 */ + U16 Reserved7; /* 0x1A */ +} MPI2_PORT_FACTS_REPLY, MPI2_POINTER PTR_MPI2_PORT_FACTS_REPLY, + Mpi2PortFactsReply_t, MPI2_POINTER pMpi2PortFactsReply_t; + +/* PortType values */ +#define MPI2_PORTFACTS_PORTTYPE_INACTIVE (0x00) +#define MPI2_PORTFACTS_PORTTYPE_FC (0x10) +#define MPI2_PORTFACTS_PORTTYPE_ISCSI (0x20) +#define MPI2_PORTFACTS_PORTTYPE_SAS_PHYSICAL (0x30) +#define MPI2_PORTFACTS_PORTTYPE_SAS_VIRTUAL (0x31) + + +/**************************************************************************** +* PortEnable message +****************************************************************************/ + +/* PortEnable Request message */ +typedef struct _MPI2_PORT_ENABLE_REQUEST +{ + U16 Reserved1; /* 0x00 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U8 Reserved2; /* 0x04 */ + U8 PortFlags; /* 0x05 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ +} MPI2_PORT_ENABLE_REQUEST, MPI2_POINTER PTR_MPI2_PORT_ENABLE_REQUEST, + Mpi2PortEnableRequest_t, MPI2_POINTER pMpi2PortEnableRequest_t; + + +/* PortEnable Reply message */ +typedef struct _MPI2_PORT_ENABLE_REPLY +{ + U16 Reserved1; /* 0x00 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U8 Reserved2; /* 0x04 */ + U8 PortFlags; /* 0x05 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 Reserved5; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ +} MPI2_PORT_ENABLE_REPLY, MPI2_POINTER PTR_MPI2_PORT_ENABLE_REPLY, + Mpi2PortEnableReply_t, MPI2_POINTER pMpi2PortEnableReply_t; + + +/**************************************************************************** +* EventNotification message +****************************************************************************/ + +/* EventNotification Request message */ +#define MPI2_EVENT_NOTIFY_EVENTMASK_WORDS (4) + +typedef struct _MPI2_EVENT_NOTIFICATION_REQUEST +{ + U16 Reserved1; /* 0x00 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U32 Reserved5; /* 0x0C */ + U32 Reserved6; /* 0x10 */ + U32 EventMasks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];/* 0x14 */ + U16 SASBroadcastPrimitiveMasks; /* 0x24 */ + U16 Reserved7; /* 0x26 */ + U32 Reserved8; /* 0x28 */ +} MPI2_EVENT_NOTIFICATION_REQUEST, + MPI2_POINTER PTR_MPI2_EVENT_NOTIFICATION_REQUEST, + Mpi2EventNotificationRequest_t, MPI2_POINTER pMpi2EventNotificationRequest_t; + + +/* EventNotification Reply message */ +typedef struct _MPI2_EVENT_NOTIFICATION_REPLY +{ + U16 EventDataLength; /* 0x00 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved1; /* 0x04 */ + U8 AckRequired; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved2; /* 0x0A */ + U16 Reserved3; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + U16 Event; /* 0x14 */ + U16 Reserved4; /* 0x16 */ + U32 EventContext; /* 0x18 */ + U32 EventData[1]; /* 0x1C */ +} MPI2_EVENT_NOTIFICATION_REPLY, MPI2_POINTER PTR_MPI2_EVENT_NOTIFICATION_REPLY, + Mpi2EventNotificationReply_t, MPI2_POINTER pMpi2EventNotificationReply_t; + +/* AckRequired */ +#define MPI2_EVENT_NOTIFICATION_ACK_NOT_REQUIRED (0x00) +#define MPI2_EVENT_NOTIFICATION_ACK_REQUIRED (0x01) + +/* Event */ +#define MPI2_EVENT_LOG_DATA (0x0001) +#define MPI2_EVENT_STATE_CHANGE (0x0002) +#define MPI2_EVENT_HARD_RESET_RECEIVED (0x0005) +#define MPI2_EVENT_EVENT_CHANGE (0x000A) +#define MPI2_EVENT_TASK_SET_FULL (0x000E) +#define MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE (0x000F) +#define MPI2_EVENT_IR_OPERATION_STATUS (0x0014) +#define MPI2_EVENT_SAS_DISCOVERY (0x0016) +#define MPI2_EVENT_SAS_BROADCAST_PRIMITIVE (0x0017) +#define MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE (0x0018) +#define MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW (0x0019) +#define MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST (0x001C) +#define MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE (0x001D) +#define MPI2_EVENT_IR_VOLUME (0x001E) +#define MPI2_EVENT_IR_PHYSICAL_DISK (0x001F) +#define MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST (0x0020) +#define MPI2_EVENT_LOG_ENTRY_ADDED (0x0021) + + +/* Log Entry Added Event data */ + +/* the following structure matches MPI2_LOG_0_ENTRY in mpi2_cnfg.h */ +#define MPI2_EVENT_DATA_LOG_DATA_LENGTH (0x1C) + +typedef struct _MPI2_EVENT_DATA_LOG_ENTRY_ADDED +{ + U64 TimeStamp; /* 0x00 */ + U32 Reserved1; /* 0x08 */ + U16 LogSequence; /* 0x0C */ + U16 LogEntryQualifier; /* 0x0E */ + U8 VP_ID; /* 0x10 */ + U8 VF_ID; /* 0x11 */ + U16 Reserved2; /* 0x12 */ + U8 LogData[MPI2_EVENT_DATA_LOG_DATA_LENGTH];/* 0x14 */ +} MPI2_EVENT_DATA_LOG_ENTRY_ADDED, + MPI2_POINTER PTR_MPI2_EVENT_DATA_LOG_ENTRY_ADDED, + Mpi2EventDataLogEntryAdded_t, MPI2_POINTER pMpi2EventDataLogEntryAdded_t; + +/* Hard Reset Received Event data */ + +typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED +{ + U8 Reserved1; /* 0x00 */ + U8 Port; /* 0x01 */ + U16 Reserved2; /* 0x02 */ +} MPI2_EVENT_DATA_HARD_RESET_RECEIVED, + MPI2_POINTER PTR_MPI2_EVENT_DATA_HARD_RESET_RECEIVED, + Mpi2EventDataHardResetReceived_t, + MPI2_POINTER pMpi2EventDataHardResetReceived_t; + +/* Task Set Full Event data */ + +typedef struct _MPI2_EVENT_DATA_TASK_SET_FULL +{ + U16 DevHandle; /* 0x00 */ + U16 CurrentDepth; /* 0x02 */ +} MPI2_EVENT_DATA_TASK_SET_FULL, MPI2_POINTER PTR_MPI2_EVENT_DATA_TASK_SET_FULL, + Mpi2EventDataTaskSetFull_t, MPI2_POINTER pMpi2EventDataTaskSetFull_t; + + +/* SAS Device Status Change Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE +{ + U16 TaskTag; /* 0x00 */ + U8 ReasonCode; /* 0x02 */ + U8 Reserved1; /* 0x03 */ + U8 ASC; /* 0x04 */ + U8 ASCQ; /* 0x05 */ + U16 DevHandle; /* 0x06 */ + U32 Reserved2; /* 0x08 */ + U64 SASAddress; /* 0x0C */ + U8 LUN[8]; /* 0x14 */ +} MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, + MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE, + Mpi2EventDataSasDeviceStatusChange_t, + MPI2_POINTER pMpi2EventDataSasDeviceStatusChange_t; + +/* SAS Device Status Change Event data ReasonCode values */ +#define MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05) +#define MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07) +#define MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08) +#define MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL (0x09) +#define MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A) +#define MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B) +#define MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C) +#define MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION (0x0D) +#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E) +#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F) +#define MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE (0x10) + + +/* Integrated RAID Operation Status Event data */ + +typedef struct _MPI2_EVENT_DATA_IR_OPERATION_STATUS +{ + U16 VolDevHandle; /* 0x00 */ + U16 Reserved1; /* 0x02 */ + U8 RAIDOperation; /* 0x04 */ + U8 PercentComplete; /* 0x05 */ + U16 Reserved2; /* 0x06 */ + U32 Resereved3; /* 0x08 */ +} MPI2_EVENT_DATA_IR_OPERATION_STATUS, + MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_OPERATION_STATUS, + Mpi2EventDataIrOperationStatus_t, + MPI2_POINTER pMpi2EventDataIrOperationStatus_t; + +/* Integrated RAID Operation Status Event data RAIDOperation values */ +#define MPI2_EVENT_IR_RAIDOP_RESYNC (0x00) +#define MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION (0x01) +#define MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK (0x02) +#define MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT (0x03) +#define MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT (0x04) + + +/* Integrated RAID Volume Event data */ + +typedef struct _MPI2_EVENT_DATA_IR_VOLUME +{ + U16 VolDevHandle; /* 0x00 */ + U8 ReasonCode; /* 0x02 */ + U8 Reserved1; /* 0x03 */ + U32 NewValue; /* 0x04 */ + U32 PreviousValue; /* 0x08 */ +} MPI2_EVENT_DATA_IR_VOLUME, MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_VOLUME, + Mpi2EventDataIrVolume_t, MPI2_POINTER pMpi2EventDataIrVolume_t; + +/* Integrated RAID Volume Event data ReasonCode values */ +#define MPI2_EVENT_IR_VOLUME_RC_SETTINGS_CHANGED (0x01) +#define MPI2_EVENT_IR_VOLUME_RC_STATUS_FLAGS_CHANGED (0x02) +#define MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED (0x03) + + +/* Integrated RAID Physical Disk Event data */ + +typedef struct _MPI2_EVENT_DATA_IR_PHYSICAL_DISK +{ + U16 Reserved1; /* 0x00 */ + U8 ReasonCode; /* 0x02 */ + U8 PhysDiskNum; /* 0x03 */ + U16 PhysDiskDevHandle; /* 0x04 */ + U16 Reserved2; /* 0x06 */ + U16 Slot; /* 0x08 */ + U16 EnclosureHandle; /* 0x0A */ + U32 NewValue; /* 0x0C */ + U32 PreviousValue; /* 0x10 */ +} MPI2_EVENT_DATA_IR_PHYSICAL_DISK, + MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_PHYSICAL_DISK, + Mpi2EventDataIrPhysicalDisk_t, MPI2_POINTER pMpi2EventDataIrPhysicalDisk_t; + +/* Integrated RAID Physical Disk Event data ReasonCode values */ +#define MPI2_EVENT_IR_PHYSDISK_RC_SETTINGS_CHANGED (0x01) +#define MPI2_EVENT_IR_PHYSDISK_RC_STATUS_FLAGS_CHANGED (0x02) +#define MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED (0x03) + + +/* Integrated RAID Configuration Change List Event data */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check NumElements at runtime. + */ +#ifndef MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT +#define MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT (1) +#endif + +typedef struct _MPI2_EVENT_IR_CONFIG_ELEMENT +{ + U16 ElementFlags; /* 0x00 */ + U16 VolDevHandle; /* 0x02 */ + U8 ReasonCode; /* 0x04 */ + U8 PhysDiskNum; /* 0x05 */ + U16 PhysDiskDevHandle; /* 0x06 */ +} MPI2_EVENT_IR_CONFIG_ELEMENT, MPI2_POINTER PTR_MPI2_EVENT_IR_CONFIG_ELEMENT, + Mpi2EventIrConfigElement_t, MPI2_POINTER pMpi2EventIrConfigElement_t; + +/* IR Configuration Change List Event data ElementFlags values */ +#define MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK (0x000F) +#define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT (0x0000) +#define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT (0x0001) +#define MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT (0x0002) + +/* IR Configuration Change List Event data ReasonCode values */ +#define MPI2_EVENT_IR_CHANGE_RC_ADDED (0x01) +#define MPI2_EVENT_IR_CHANGE_RC_REMOVED (0x02) +#define MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE (0x03) +#define MPI2_EVENT_IR_CHANGE_RC_HIDE (0x04) +#define MPI2_EVENT_IR_CHANGE_RC_UNHIDE (0x05) +#define MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED (0x06) +#define MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED (0x07) +#define MPI2_EVENT_IR_CHANGE_RC_PD_CREATED (0x08) +#define MPI2_EVENT_IR_CHANGE_RC_PD_DELETED (0x09) + +typedef struct _MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST +{ + U8 NumElements; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 Reserved2; /* 0x02 */ + U8 ConfigNum; /* 0x03 */ + U32 Flags; /* 0x04 */ + MPI2_EVENT_IR_CONFIG_ELEMENT ConfigElement[MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT]; /* 0x08 */ +} MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST, + MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST, + Mpi2EventDataIrConfigChangeList_t, + MPI2_POINTER pMpi2EventDataIrConfigChangeList_t; + +/* IR Configuration Change List Event data Flags values */ +#define MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG (0x00000001) + + +/* SAS Discovery Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_DISCOVERY +{ + U8 Flags; /* 0x00 */ + U8 ReasonCode; /* 0x01 */ + U8 PhysicalPort; /* 0x02 */ + U8 Reserved1; /* 0x03 */ + U32 DiscoveryStatus; /* 0x04 */ +} MPI2_EVENT_DATA_SAS_DISCOVERY, + MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_DISCOVERY, + Mpi2EventDataSasDiscovery_t, MPI2_POINTER pMpi2EventDataSasDiscovery_t; + +/* SAS Discovery Event data Flags values */ +#define MPI2_EVENT_SAS_DISC_DEVICE_CHANGE (0x02) +#define MPI2_EVENT_SAS_DISC_IN_PROGRESS (0x01) + +/* SAS Discovery Event data ReasonCode values */ +#define MPI2_EVENT_SAS_DISC_RC_STARTED (0x01) +#define MPI2_EVENT_SAS_DISC_RC_COMPLETED (0x02) + +/* SAS Discovery Event data DiscoveryStatus values */ +#define MPI2_EVENT_SAS_DISC_DS_MAX_ENCLOSURES_EXCEED (0x80000000) +#define MPI2_EVENT_SAS_DISC_DS_MAX_EXPANDERS_EXCEED (0x40000000) +#define MPI2_EVENT_SAS_DISC_DS_MAX_DEVICES_EXCEED (0x20000000) +#define MPI2_EVENT_SAS_DISC_DS_MAX_TOPO_PHYS_EXCEED (0x10000000) +#define MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR (0x08000000) +#define MPI2_EVENT_SAS_DISC_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000) +#define MPI2_EVENT_SAS_DISC_DS_EXP_MULTI_SUBTRACTIVE (0x00004000) +#define MPI2_EVENT_SAS_DISC_DS_MULTI_PORT_DOMAIN (0x00002000) +#define MPI2_EVENT_SAS_DISC_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000) +#define MPI2_EVENT_SAS_DISC_DS_UNSUPPORTED_DEVICE (0x00000800) +#define MPI2_EVENT_SAS_DISC_DS_TABLE_LINK (0x00000400) +#define MPI2_EVENT_SAS_DISC_DS_SUBTRACTIVE_LINK (0x00000200) +#define MPI2_EVENT_SAS_DISC_DS_SMP_CRC_ERROR (0x00000100) +#define MPI2_EVENT_SAS_DISC_DS_SMP_FUNCTION_FAILED (0x00000080) +#define MPI2_EVENT_SAS_DISC_DS_INDEX_NOT_EXIST (0x00000040) +#define MPI2_EVENT_SAS_DISC_DS_OUT_ROUTE_ENTRIES (0x00000020) +#define MPI2_EVENT_SAS_DISC_DS_SMP_TIMEOUT (0x00000010) +#define MPI2_EVENT_SAS_DISC_DS_MULTIPLE_PORTS (0x00000004) +#define MPI2_EVENT_SAS_DISC_DS_UNADDRESSABLE_DEVICE (0x00000002) +#define MPI2_EVENT_SAS_DISC_DS_LOOP_DETECTED (0x00000001) + + +/* SAS Broadcast Primitive Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE +{ + U8 PhyNum; /* 0x00 */ + U8 Port; /* 0x01 */ + U8 PortWidth; /* 0x02 */ + U8 Primitive; /* 0x03 */ +} MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, + MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE, + Mpi2EventDataSasBroadcastPrimitive_t, + MPI2_POINTER pMpi2EventDataSasBroadcastPrimitive_t; + +/* defines for the Primitive field */ +#define MPI2_EVENT_PRIMITIVE_CHANGE (0x01) +#define MPI2_EVENT_PRIMITIVE_SES (0x02) +#define MPI2_EVENT_PRIMITIVE_EXPANDER (0x03) +#define MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT (0x04) +#define MPI2_EVENT_PRIMITIVE_RESERVED3 (0x05) +#define MPI2_EVENT_PRIMITIVE_RESERVED4 (0x06) +#define MPI2_EVENT_PRIMITIVE_CHANGE0_RESERVED (0x07) +#define MPI2_EVENT_PRIMITIVE_CHANGE1_RESERVED (0x08) + + +/* SAS Initiator Device Status Change Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE +{ + U8 ReasonCode; /* 0x00 */ + U8 PhysicalPort; /* 0x01 */ + U16 DevHandle; /* 0x02 */ + U64 SASAddress; /* 0x04 */ +} MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, + MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE, + Mpi2EventDataSasInitDevStatusChange_t, + MPI2_POINTER pMpi2EventDataSasInitDevStatusChange_t; + +/* SAS Initiator Device Status Change event ReasonCode values */ +#define MPI2_EVENT_SAS_INIT_RC_ADDED (0x01) +#define MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING (0x02) + + +/* SAS Initiator Device Table Overflow Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW +{ + U16 MaxInit; /* 0x00 */ + U16 CurrentInit; /* 0x02 */ + U64 SASAddress; /* 0x04 */ +} MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, + MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW, + Mpi2EventDataSasInitTableOverflow_t, + MPI2_POINTER pMpi2EventDataSasInitTableOverflow_t; + + +/* SAS Topology Change List Event data */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check NumEntries at runtime. + */ +#ifndef MPI2_EVENT_SAS_TOPO_PHY_COUNT +#define MPI2_EVENT_SAS_TOPO_PHY_COUNT (1) +#endif + +typedef struct _MPI2_EVENT_SAS_TOPO_PHY_ENTRY +{ + U16 AttachedDevHandle; /* 0x00 */ + U8 LinkRate; /* 0x02 */ + U8 PhyStatus; /* 0x03 */ +} MPI2_EVENT_SAS_TOPO_PHY_ENTRY, MPI2_POINTER PTR_MPI2_EVENT_SAS_TOPO_PHY_ENTRY, + Mpi2EventSasTopoPhyEntry_t, MPI2_POINTER pMpi2EventSasTopoPhyEntry_t; + +typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST +{ + U16 EnclosureHandle; /* 0x00 */ + U16 ExpanderDevHandle; /* 0x02 */ + U8 NumPhys; /* 0x04 */ + U8 Reserved1; /* 0x05 */ + U16 Reserved2; /* 0x06 */ + U8 NumEntries; /* 0x08 */ + U8 StartPhyNum; /* 0x09 */ + U8 ExpStatus; /* 0x0A */ + U8 PhysicalPort; /* 0x0B */ + MPI2_EVENT_SAS_TOPO_PHY_ENTRY PHY[MPI2_EVENT_SAS_TOPO_PHY_COUNT]; /* 0x0C*/ +} MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, + MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST, + Mpi2EventDataSasTopologyChangeList_t, + MPI2_POINTER pMpi2EventDataSasTopologyChangeList_t; + +/* values for the ExpStatus field */ +#define MPI2_EVENT_SAS_TOPO_ES_ADDED (0x01) +#define MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING (0x02) +#define MPI2_EVENT_SAS_TOPO_ES_RESPONDING (0x03) +#define MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING (0x04) + +/* defines for the LinkRate field */ +#define MPI2_EVENT_SAS_TOPO_LR_CURRENT_MASK (0xF0) +#define MPI2_EVENT_SAS_TOPO_LR_CURRENT_SHIFT (4) +#define MPI2_EVENT_SAS_TOPO_LR_PREV_MASK (0x0F) +#define MPI2_EVENT_SAS_TOPO_LR_PREV_SHIFT (0) + +#define MPI2_EVENT_SAS_TOPO_LR_UNKNOWN_LINK_RATE (0x00) +#define MPI2_EVENT_SAS_TOPO_LR_PHY_DISABLED (0x01) +#define MPI2_EVENT_SAS_TOPO_LR_NEGOTIATION_FAILED (0x02) +#define MPI2_EVENT_SAS_TOPO_LR_SATA_OOB_COMPLETE (0x03) +#define MPI2_EVENT_SAS_TOPO_LR_PORT_SELECTOR (0x04) +#define MPI2_EVENT_SAS_TOPO_LR_SMP_RESET_IN_PROGRESS (0x05) +#define MPI2_EVENT_SAS_TOPO_LR_RATE_1_5 (0x08) +#define MPI2_EVENT_SAS_TOPO_LR_RATE_3_0 (0x09) +#define MPI2_EVENT_SAS_TOPO_LR_RATE_6_0 (0x0A) + +/* values for the PhyStatus field */ +#define MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT (0x80) +#define MPI2_EVENT_SAS_TOPO_PS_MULTIPLEX_CHANGE (0x10) +/* values for the PhyStatus ReasonCode sub-field */ +#define MPI2_EVENT_SAS_TOPO_RC_MASK (0x0F) +#define MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED (0x01) +#define MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING (0x02) +#define MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED (0x03) +#define MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE (0x04) +#define MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING (0x05) + + +/* SAS Enclosure Device Status Change Event data */ + +typedef struct _MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE +{ + U16 EnclosureHandle; /* 0x00 */ + U8 ReasonCode; /* 0x02 */ + U8 PhysicalPort; /* 0x03 */ + U64 EnclosureLogicalID; /* 0x04 */ + U16 NumSlots; /* 0x0C */ + U16 StartSlot; /* 0x0E */ + U32 PhyBits; /* 0x10 */ +} MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE, + MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE, + Mpi2EventDataSasEnclDevStatusChange_t, + MPI2_POINTER pMpi2EventDataSasEnclDevStatusChange_t; + +/* SAS Enclosure Device Status Change event ReasonCode values */ +#define MPI2_EVENT_SAS_ENCL_RC_ADDED (0x01) +#define MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING (0x02) + + +/**************************************************************************** +* EventAck message +****************************************************************************/ + +/* EventAck Request message */ +typedef struct _MPI2_EVENT_ACK_REQUEST +{ + U16 Reserved1; /* 0x00 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 Event; /* 0x0C */ + U16 Reserved5; /* 0x0E */ + U32 EventContext; /* 0x10 */ +} MPI2_EVENT_ACK_REQUEST, MPI2_POINTER PTR_MPI2_EVENT_ACK_REQUEST, + Mpi2EventAckRequest_t, MPI2_POINTER pMpi2EventAckRequest_t; + + +/* EventAck Reply message */ +typedef struct _MPI2_EVENT_ACK_REPLY +{ + U16 Reserved1; /* 0x00 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 Reserved5; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ +} MPI2_EVENT_ACK_REPLY, MPI2_POINTER PTR_MPI2_EVENT_ACK_REPLY, + Mpi2EventAckReply_t, MPI2_POINTER pMpi2EventAckReply_t; + + +/**************************************************************************** +* FWDownload message +****************************************************************************/ + +/* FWDownload Request message */ +typedef struct _MPI2_FW_DOWNLOAD_REQUEST +{ + U8 ImageType; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U32 TotalImageSize; /* 0x0C */ + U32 Reserved5; /* 0x10 */ + MPI2_MPI_SGE_UNION SGL; /* 0x14 */ +} MPI2_FW_DOWNLOAD_REQUEST, MPI2_POINTER PTR_MPI2_FW_DOWNLOAD_REQUEST, + Mpi2FWDownloadRequest, MPI2_POINTER pMpi2FWDownloadRequest; + +#define MPI2_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT (0x01) + +#define MPI2_FW_DOWNLOAD_ITYPE_FW (0x01) +#define MPI2_FW_DOWNLOAD_ITYPE_BIOS (0x02) +#define MPI2_FW_DOWNLOAD_ITYPE_MANUFACTURING (0x06) +#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_1 (0x07) +#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_2 (0x08) +#define MPI2_FW_DOWNLOAD_ITYPE_MEGARAID (0x09) +#define MPI2_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B) + +/* FWDownload TransactionContext Element */ +typedef struct _MPI2_FW_DOWNLOAD_TCSGE +{ + U8 Reserved1; /* 0x00 */ + U8 ContextSize; /* 0x01 */ + U8 DetailsLength; /* 0x02 */ + U8 Flags; /* 0x03 */ + U32 Reserved2; /* 0x04 */ + U32 ImageOffset; /* 0x08 */ + U32 ImageSize; /* 0x0C */ +} MPI2_FW_DOWNLOAD_TCSGE, MPI2_POINTER PTR_MPI2_FW_DOWNLOAD_TCSGE, + Mpi2FWDownloadTCSGE_t, MPI2_POINTER pMpi2FWDownloadTCSGE_t; + +/* FWDownload Reply message */ +typedef struct _MPI2_FW_DOWNLOAD_REPLY +{ + U8 ImageType; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 Reserved5; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ +} MPI2_FW_DOWNLOAD_REPLY, MPI2_POINTER PTR_MPI2_FW_DOWNLOAD_REPLY, + Mpi2FWDownloadReply_t, MPI2_POINTER pMpi2FWDownloadReply_t; + + +/**************************************************************************** +* FWUpload message +****************************************************************************/ + +/* FWUpload Request message */ +typedef struct _MPI2_FW_UPLOAD_REQUEST +{ + U8 ImageType; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U32 Reserved5; /* 0x0C */ + U32 Reserved6; /* 0x10 */ + MPI2_MPI_SGE_UNION SGL; /* 0x14 */ +} MPI2_FW_UPLOAD_REQUEST, MPI2_POINTER PTR_MPI2_FW_UPLOAD_REQUEST, + Mpi2FWUploadRequest_t, MPI2_POINTER pMpi2FWUploadRequest_t; + +#define MPI2_FW_UPLOAD_ITYPE_FW_CURRENT (0x00) +#define MPI2_FW_UPLOAD_ITYPE_FW_FLASH (0x01) +#define MPI2_FW_UPLOAD_ITYPE_BIOS_FLASH (0x02) +#define MPI2_FW_UPLOAD_ITYPE_FW_BACKUP (0x05) +#define MPI2_FW_UPLOAD_ITYPE_MANUFACTURING (0x06) +#define MPI2_FW_UPLOAD_ITYPE_CONFIG_1 (0x07) +#define MPI2_FW_UPLOAD_ITYPE_CONFIG_2 (0x08) +#define MPI2_FW_UPLOAD_ITYPE_MEGARAID (0x09) +#define MPI2_FW_UPLOAD_ITYPE_COMPLETE (0x0A) +#define MPI2_FW_UPLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B) + +typedef struct _MPI2_FW_UPLOAD_TCSGE +{ + U8 Reserved1; /* 0x00 */ + U8 ContextSize; /* 0x01 */ + U8 DetailsLength; /* 0x02 */ + U8 Flags; /* 0x03 */ + U32 Reserved2; /* 0x04 */ + U32 ImageOffset; /* 0x08 */ + U32 ImageSize; /* 0x0C */ +} MPI2_FW_UPLOAD_TCSGE, MPI2_POINTER PTR_MPI2_FW_UPLOAD_TCSGE, + Mpi2FWUploadTCSGE_t, MPI2_POINTER pMpi2FWUploadTCSGE_t; + +/* FWUpload Reply message */ +typedef struct _MPI2_FW_UPLOAD_REPLY +{ + U8 ImageType; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 Reserved5; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + U32 ActualImageSize; /* 0x14 */ +} MPI2_FW_UPLOAD_REPLY, MPI2_POINTER PTR_MPI2_FW_UPLOAD_REPLY, + Mpi2FWUploadReply_t, MPI2_POINTER pMPi2FWUploadReply_t; + + +/* FW Image Header */ +typedef struct _MPI2_FW_IMAGE_HEADER +{ + U32 Signature; /* 0x00 */ + U32 Signature0; /* 0x04 */ + U32 Signature1; /* 0x08 */ + U32 Signature2; /* 0x0C */ + MPI2_VERSION_UNION MPIVersion; /* 0x10 */ + MPI2_VERSION_UNION FWVersion; /* 0x14 */ + MPI2_VERSION_UNION NVDATAVersion; /* 0x18 */ + MPI2_VERSION_UNION PackageVersion; /* 0x1C */ + U16 VendorID; /* 0x20 */ + U16 ProductID; /* 0x22 */ + U16 ProtocolFlags; /* 0x24 */ + U16 Reserved26; /* 0x26 */ + U32 IOCCapabilities; /* 0x28 */ + U32 ImageSize; /* 0x2C */ + U32 NextImageHeaderOffset; /* 0x30 */ + U32 Checksum; /* 0x34 */ + U32 Reserved38; /* 0x38 */ + U32 Reserved3C; /* 0x3C */ + U32 Reserved40; /* 0x40 */ + U32 Reserved44; /* 0x44 */ + U32 Reserved48; /* 0x48 */ + U32 Reserved4C; /* 0x4C */ + U32 Reserved50; /* 0x50 */ + U32 Reserved54; /* 0x54 */ + U32 Reserved58; /* 0x58 */ + U32 Reserved5C; /* 0x5C */ + U32 Reserved60; /* 0x60 */ + U32 FirmwareVersionNameWhat; /* 0x64 */ + U8 FirmwareVersionName[32]; /* 0x68 */ + U32 VendorNameWhat; /* 0x88 */ + U8 VendorName[32]; /* 0x8C */ + U32 PackageNameWhat; /* 0x88 */ + U8 PackageName[32]; /* 0x8C */ + U32 ReservedD0; /* 0xD0 */ + U32 ReservedD4; /* 0xD4 */ + U32 ReservedD8; /* 0xD8 */ + U32 ReservedDC; /* 0xDC */ + U32 ReservedE0; /* 0xE0 */ + U32 ReservedE4; /* 0xE4 */ + U32 ReservedE8; /* 0xE8 */ + U32 ReservedEC; /* 0xEC */ + U32 ReservedF0; /* 0xF0 */ + U32 ReservedF4; /* 0xF4 */ + U32 ReservedF8; /* 0xF8 */ + U32 ReservedFC; /* 0xFC */ +} MPI2_FW_IMAGE_HEADER, MPI2_POINTER PTR_MPI2_FW_IMAGE_HEADER, + Mpi2FWImageHeader_t, MPI2_POINTER pMpi2FWImageHeader_t; + +/* Signature field */ +#define MPI2_FW_HEADER_SIGNATURE_OFFSET (0x00) +#define MPI2_FW_HEADER_SIGNATURE_MASK (0xFF000000) +#define MPI2_FW_HEADER_SIGNATURE (0xEA000000) + +/* Signature0 field */ +#define MPI2_FW_HEADER_SIGNATURE0_OFFSET (0x04) +#define MPI2_FW_HEADER_SIGNATURE0 (0x5AFAA55A) + +/* Signature1 field */ +#define MPI2_FW_HEADER_SIGNATURE1_OFFSET (0x08) +#define MPI2_FW_HEADER_SIGNATURE1 (0xA55AFAA5) + +/* Signature2 field */ +#define MPI2_FW_HEADER_SIGNATURE2_OFFSET (0x0C) +#define MPI2_FW_HEADER_SIGNATURE2 (0x5AA55AFA) + + +/* defines for using the ProductID field */ +#define MPI2_FW_HEADER_PID_TYPE_MASK (0xF000) +#define MPI2_FW_HEADER_PID_TYPE_SAS (0x2000) + +#define MPI2_FW_HEADER_PID_PROD_MASK (0x0F00) +#define MPI2_FW_HEADER_PID_PROD_A (0x0000) + +#define MPI2_FW_HEADER_PID_FAMILY_MASK (0x00FF) +/* SAS */ +#define MPI2_FW_HEADER_PID_FAMILY_2108_SAS (0x0010) + +/* use MPI2_IOCFACTS_PROTOCOL_ defines for ProtocolFlags field */ + +/* use MPI2_IOCFACTS_CAPABILITY_ defines for IOCCapabilities field */ + + +#define MPI2_FW_HEADER_IMAGESIZE_OFFSET (0x2C) +#define MPI2_FW_HEADER_NEXTIMAGE_OFFSET (0x30) +#define MPI2_FW_HEADER_VERNMHWAT_OFFSET (0x64) + +#define MPI2_FW_HEADER_WHAT_SIGNATURE (0x29232840) + +#define MPI2_FW_HEADER_SIZE (0x100) + + +/* Extended Image Header */ +typedef struct _MPI2_EXT_IMAGE_HEADER + +{ + U8 ImageType; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U16 Reserved2; /* 0x02 */ + U32 Checksum; /* 0x04 */ + U32 ImageSize; /* 0x08 */ + U32 NextImageHeaderOffset; /* 0x0C */ + U32 PackageVersion; /* 0x10 */ + U32 Reserved3; /* 0x14 */ + U32 Reserved4; /* 0x18 */ + U32 Reserved5; /* 0x1C */ + U8 IdentifyString[32]; /* 0x20 */ +} MPI2_EXT_IMAGE_HEADER, MPI2_POINTER PTR_MPI2_EXT_IMAGE_HEADER, + Mpi2ExtImageHeader_t, MPI2_POINTER pMpi2ExtImageHeader_t; + +/* useful offsets */ +#define MPI2_EXT_IMAGE_IMAGETYPE_OFFSET (0x00) +#define MPI2_EXT_IMAGE_IMAGESIZE_OFFSET (0x08) +#define MPI2_EXT_IMAGE_NEXTIMAGE_OFFSET (0x0C) + +#define MPI2_EXT_IMAGE_HEADER_SIZE (0x40) + +/* defines for the ImageType field */ +#define MPI2_EXT_IMAGE_TYPE_UNSPECIFIED (0x00) +#define MPI2_EXT_IMAGE_TYPE_FW (0x01) +#define MPI2_EXT_IMAGE_TYPE_NVDATA (0x03) +#define MPI2_EXT_IMAGE_TYPE_BOOTLOADER (0x04) +#define MPI2_EXT_IMAGE_TYPE_INITIALIZATION (0x05) +#define MPI2_EXT_IMAGE_TYPE_FLASH_LAYOUT (0x06) +#define MPI2_EXT_IMAGE_TYPE_SUPPORTED_DEVICES (0x07) +#define MPI2_EXT_IMAGE_TYPE_MEGARAID (0x08) + +#define MPI2_EXT_IMAGE_TYPE_MAX (MPI2_EXT_IMAGE_TYPE_MEGARAID) + + + +/* FLASH Layout Extended Image Data */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check RegionsPerLayout at runtime. + */ +#ifndef MPI2_FLASH_NUMBER_OF_REGIONS +#define MPI2_FLASH_NUMBER_OF_REGIONS (1) +#endif + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check NumberOfLayouts at runtime. + */ +#ifndef MPI2_FLASH_NUMBER_OF_LAYOUTS +#define MPI2_FLASH_NUMBER_OF_LAYOUTS (1) +#endif + +typedef struct _MPI2_FLASH_REGION +{ + U8 RegionType; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U16 Reserved2; /* 0x02 */ + U32 RegionOffset; /* 0x04 */ + U32 RegionSize; /* 0x08 */ + U32 Reserved3; /* 0x0C */ +} MPI2_FLASH_REGION, MPI2_POINTER PTR_MPI2_FLASH_REGION, + Mpi2FlashRegion_t, MPI2_POINTER pMpi2FlashRegion_t; + +typedef struct _MPI2_FLASH_LAYOUT +{ + U32 FlashSize; /* 0x00 */ + U32 Reserved1; /* 0x04 */ + U32 Reserved2; /* 0x08 */ + U32 Reserved3; /* 0x0C */ + MPI2_FLASH_REGION Region[MPI2_FLASH_NUMBER_OF_REGIONS];/* 0x10 */ +} MPI2_FLASH_LAYOUT, MPI2_POINTER PTR_MPI2_FLASH_LAYOUT, + Mpi2FlashLayout_t, MPI2_POINTER pMpi2FlashLayout_t; + +typedef struct _MPI2_FLASH_LAYOUT_DATA +{ + U8 ImageRevision; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 SizeOfRegion; /* 0x02 */ + U8 Reserved2; /* 0x03 */ + U16 NumberOfLayouts; /* 0x04 */ + U16 RegionsPerLayout; /* 0x06 */ + U16 MinimumSectorAlignment; /* 0x08 */ + U16 Reserved3; /* 0x0A */ + U32 Reserved4; /* 0x0C */ + MPI2_FLASH_LAYOUT Layout[MPI2_FLASH_NUMBER_OF_LAYOUTS];/* 0x10 */ +} MPI2_FLASH_LAYOUT_DATA, MPI2_POINTER PTR_MPI2_FLASH_LAYOUT_DATA, + Mpi2FlashLayoutData_t, MPI2_POINTER pMpi2FlashLayoutData_t; + +/* defines for the RegionType field */ +#define MPI2_FLASH_REGION_UNUSED (0x00) +#define MPI2_FLASH_REGION_FIRMWARE (0x01) +#define MPI2_FLASH_REGION_BIOS (0x02) +#define MPI2_FLASH_REGION_NVDATA (0x03) +#define MPI2_FLASH_REGION_FIRMWARE_BACKUP (0x05) +#define MPI2_FLASH_REGION_MFG_INFORMATION (0x06) +#define MPI2_FLASH_REGION_CONFIG_1 (0x07) +#define MPI2_FLASH_REGION_CONFIG_2 (0x08) +#define MPI2_FLASH_REGION_MEGARAID (0x09) +#define MPI2_FLASH_REGION_INIT (0x0A) + +/* ImageRevision */ +#define MPI2_FLASH_LAYOUT_IMAGE_REVISION (0x00) + + + +/* Supported Devices Extended Image Data */ + +/* + * Host code (drivers, BIOS, utilities, etc.) should leave this define set to + * one and check NumberOfDevices at runtime. + */ +#ifndef MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES +#define MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES (1) +#endif + +typedef struct _MPI2_SUPPORTED_DEVICE +{ + U16 DeviceID; /* 0x00 */ + U16 VendorID; /* 0x02 */ + U16 DeviceIDMask; /* 0x04 */ + U16 Reserved1; /* 0x06 */ + U8 LowPCIRev; /* 0x08 */ + U8 HighPCIRev; /* 0x09 */ + U16 Reserved2; /* 0x0A */ + U32 Reserved3; /* 0x0C */ +} MPI2_SUPPORTED_DEVICE, MPI2_POINTER PTR_MPI2_SUPPORTED_DEVICE, + Mpi2SupportedDevice_t, MPI2_POINTER pMpi2SupportedDevice_t; + +typedef struct _MPI2_SUPPORTED_DEVICES_DATA +{ + U8 ImageRevision; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 NumberOfDevices; /* 0x02 */ + U8 Reserved2; /* 0x03 */ + U32 Reserved3; /* 0x04 */ + MPI2_SUPPORTED_DEVICE SupportedDevice[MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES]; /* 0x08 */ +} MPI2_SUPPORTED_DEVICES_DATA, MPI2_POINTER PTR_MPI2_SUPPORTED_DEVICES_DATA, + Mpi2SupportedDevicesData_t, MPI2_POINTER pMpi2SupportedDevicesData_t; + +/* ImageRevision */ +#define MPI2_SUPPORTED_DEVICES_IMAGE_REVISION (0x00) + + +/* Init Extended Image Data */ + +typedef struct _MPI2_INIT_IMAGE_FOOTER + +{ + U32 BootFlags; /* 0x00 */ + U32 ImageSize; /* 0x04 */ + U32 Signature0; /* 0x08 */ + U32 Signature1; /* 0x0C */ + U32 Signature2; /* 0x10 */ + U32 ResetVector; /* 0x14 */ +} MPI2_INIT_IMAGE_FOOTER, MPI2_POINTER PTR_MPI2_INIT_IMAGE_FOOTER, + Mpi2InitImageFooter_t, MPI2_POINTER pMpi2InitImageFooter_t; + +/* defines for the BootFlags field */ +#define MPI2_INIT_IMAGE_BOOTFLAGS_OFFSET (0x00) + +/* defines for the ImageSize field */ +#define MPI2_INIT_IMAGE_IMAGESIZE_OFFSET (0x04) + +/* defines for the Signature0 field */ +#define MPI2_INIT_IMAGE_SIGNATURE0_OFFSET (0x08) +#define MPI2_INIT_IMAGE_SIGNATURE0 (0x5AA55AEA) + +/* defines for the Signature1 field */ +#define MPI2_INIT_IMAGE_SIGNATURE1_OFFSET (0x0C) +#define MPI2_INIT_IMAGE_SIGNATURE1 (0xA55AEAA5) + +/* defines for the Signature2 field */ +#define MPI2_INIT_IMAGE_SIGNATURE2_OFFSET (0x10) +#define MPI2_INIT_IMAGE_SIGNATURE2 (0x5AEAA55A) + +/* Signature fields as individual bytes */ +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_0 (0xEA) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_1 (0x5A) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_2 (0xA5) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_3 (0x5A) + +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_4 (0xA5) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_5 (0xEA) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_6 (0x5A) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_7 (0xA5) + +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_8 (0x5A) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_9 (0xA5) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_A (0xEA) +#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_B (0x5A) + +/* defines for the ResetVector field */ +#define MPI2_INIT_IMAGE_RESETVECTOR_OFFSET (0x14) + + +#endif + diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_raid.h b/drivers/scsi/mpt2sas/mpi/mpi2_raid.h new file mode 100644 index 00000000000..7134816d904 --- /dev/null +++ b/drivers/scsi/mpt2sas/mpi/mpi2_raid.h @@ -0,0 +1,295 @@ +/* + * Copyright (c) 2000-2008 LSI Corporation. + * + * + * Name: mpi2_raid.h + * Title: MPI Integrated RAID messages and structures + * Creation Date: April 26, 2007 + * + * mpi2_raid.h Version: 02.00.03 + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 08-31-07 02.00.01 Modifications to RAID Action request and reply, + * including the Actions and ActionData. + * 02-29-08 02.00.02 Added MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD. + * 05-21-08 02.00.03 Added MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS so that + * the PhysDisk array in MPI2_RAID_VOLUME_CREATION_STRUCT + * can be sized by the build environment. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_RAID_H +#define MPI2_RAID_H + +/***************************************************************************** +* +* Integrated RAID Messages +* +*****************************************************************************/ + +/**************************************************************************** +* RAID Action messages +****************************************************************************/ + +/* ActionDataWord defines for use with MPI2_RAID_ACTION_DELETE_VOLUME action */ +#define MPI2_RAID_ACTION_ADATA_KEEP_LBA0 (0x00000000) +#define MPI2_RAID_ACTION_ADATA_ZERO_LBA0 (0x00000001) + +/* use MPI2_RAIDVOL0_SETTING_ defines from mpi2_cnfg.h for MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE action */ + +/* ActionDataWord defines for use with MPI2_RAID_ACTION_DISABLE_ALL_VOLUMES action */ +#define MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD (0x00000001) + +/* ActionDataWord for MPI2_RAID_ACTION_SET_RAID_FUNCTION_RATE Action */ +typedef struct _MPI2_RAID_ACTION_RATE_DATA +{ + U8 RateToChange; /* 0x00 */ + U8 RateOrMode; /* 0x01 */ + U16 DataScrubDuration; /* 0x02 */ +} MPI2_RAID_ACTION_RATE_DATA, MPI2_POINTER PTR_MPI2_RAID_ACTION_RATE_DATA, + Mpi2RaidActionRateData_t, MPI2_POINTER pMpi2RaidActionRateData_t; + +#define MPI2_RAID_ACTION_SET_RATE_RESYNC (0x00) +#define MPI2_RAID_ACTION_SET_RATE_DATA_SCRUB (0x01) +#define MPI2_RAID_ACTION_SET_RATE_POWERSAVE_MODE (0x02) + +/* ActionDataWord for MPI2_RAID_ACTION_START_RAID_FUNCTION Action */ +typedef struct _MPI2_RAID_ACTION_START_RAID_FUNCTION +{ + U8 RAIDFunction; /* 0x00 */ + U8 Flags; /* 0x01 */ + U16 Reserved1; /* 0x02 */ +} MPI2_RAID_ACTION_START_RAID_FUNCTION, + MPI2_POINTER PTR_MPI2_RAID_ACTION_START_RAID_FUNCTION, + Mpi2RaidActionStartRaidFunction_t, + MPI2_POINTER pMpi2RaidActionStartRaidFunction_t; + +/* defines for the RAIDFunction field */ +#define MPI2_RAID_ACTION_START_BACKGROUND_INIT (0x00) +#define MPI2_RAID_ACTION_START_ONLINE_CAP_EXPANSION (0x01) +#define MPI2_RAID_ACTION_START_CONSISTENCY_CHECK (0x02) + +/* defines for the Flags field */ +#define MPI2_RAID_ACTION_START_NEW (0x00) +#define MPI2_RAID_ACTION_START_RESUME (0x01) + +/* ActionDataWord for MPI2_RAID_ACTION_STOP_RAID_FUNCTION Action */ +typedef struct _MPI2_RAID_ACTION_STOP_RAID_FUNCTION +{ + U8 RAIDFunction; /* 0x00 */ + U8 Flags; /* 0x01 */ + U16 Reserved1; /* 0x02 */ +} MPI2_RAID_ACTION_STOP_RAID_FUNCTION, + MPI2_POINTER PTR_MPI2_RAID_ACTION_STOP_RAID_FUNCTION, + Mpi2RaidActionStopRaidFunction_t, + MPI2_POINTER pMpi2RaidActionStopRaidFunction_t; + +/* defines for the RAIDFunction field */ +#define MPI2_RAID_ACTION_STOP_BACKGROUND_INIT (0x00) +#define MPI2_RAID_ACTION_STOP_ONLINE_CAP_EXPANSION (0x01) +#define MPI2_RAID_ACTION_STOP_CONSISTENCY_CHECK (0x02) + +/* defines for the Flags field */ +#define MPI2_RAID_ACTION_STOP_ABORT (0x00) +#define MPI2_RAID_ACTION_STOP_PAUSE (0x01) + +/* ActionDataWord for MPI2_RAID_ACTION_CREATE_HOT_SPARE Action */ +typedef struct _MPI2_RAID_ACTION_HOT_SPARE +{ + U8 HotSparePool; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U16 DevHandle; /* 0x02 */ +} MPI2_RAID_ACTION_HOT_SPARE, MPI2_POINTER PTR_MPI2_RAID_ACTION_HOT_SPARE, + Mpi2RaidActionHotSpare_t, MPI2_POINTER pMpi2RaidActionHotSpare_t; + +/* ActionDataWord for MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE Action */ +typedef struct _MPI2_RAID_ACTION_FW_UPDATE_MODE +{ + U8 Flags; /* 0x00 */ + U8 DeviceFirmwareUpdateModeTimeout; /* 0x01 */ + U16 Reserved1; /* 0x02 */ +} MPI2_RAID_ACTION_FW_UPDATE_MODE, + MPI2_POINTER PTR_MPI2_RAID_ACTION_FW_UPDATE_MODE, + Mpi2RaidActionFwUpdateMode_t, MPI2_POINTER pMpi2RaidActionFwUpdateMode_t; + +/* ActionDataWord defines for use with MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE action */ +#define MPI2_RAID_ACTION_ADATA_DISABLE_FW_UPDATE (0x00) +#define MPI2_RAID_ACTION_ADATA_ENABLE_FW_UPDATE (0x01) + +typedef union _MPI2_RAID_ACTION_DATA +{ + U32 Word; + MPI2_RAID_ACTION_RATE_DATA Rates; + MPI2_RAID_ACTION_START_RAID_FUNCTION StartRaidFunction; + MPI2_RAID_ACTION_STOP_RAID_FUNCTION StopRaidFunction; + MPI2_RAID_ACTION_HOT_SPARE HotSpare; + MPI2_RAID_ACTION_FW_UPDATE_MODE FwUpdateMode; +} MPI2_RAID_ACTION_DATA, MPI2_POINTER PTR_MPI2_RAID_ACTION_DATA, + Mpi2RaidActionData_t, MPI2_POINTER pMpi2RaidActionData_t; + + +/* RAID Action Request Message */ +typedef struct _MPI2_RAID_ACTION_REQUEST +{ + U8 Action; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 VolDevHandle; /* 0x04 */ + U8 PhysDiskNum; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved2; /* 0x0A */ + U32 Reserved3; /* 0x0C */ + MPI2_RAID_ACTION_DATA ActionDataWord; /* 0x10 */ + MPI2_SGE_SIMPLE_UNION ActionDataSGE; /* 0x14 */ +} MPI2_RAID_ACTION_REQUEST, MPI2_POINTER PTR_MPI2_RAID_ACTION_REQUEST, + Mpi2RaidActionRequest_t, MPI2_POINTER pMpi2RaidActionRequest_t; + +/* RAID Action request Action values */ + +#define MPI2_RAID_ACTION_INDICATOR_STRUCT (0x01) +#define MPI2_RAID_ACTION_CREATE_VOLUME (0x02) +#define MPI2_RAID_ACTION_DELETE_VOLUME (0x03) +#define MPI2_RAID_ACTION_DISABLE_ALL_VOLUMES (0x04) +#define MPI2_RAID_ACTION_ENABLE_ALL_VOLUMES (0x05) +#define MPI2_RAID_ACTION_PHYSDISK_OFFLINE (0x0A) +#define MPI2_RAID_ACTION_PHYSDISK_ONLINE (0x0B) +#define MPI2_RAID_ACTION_FAIL_PHYSDISK (0x0F) +#define MPI2_RAID_ACTION_ACTIVATE_VOLUME (0x11) +#define MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE (0x15) +#define MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE (0x17) +#define MPI2_RAID_ACTION_SET_VOLUME_NAME (0x18) +#define MPI2_RAID_ACTION_SET_RAID_FUNCTION_RATE (0x19) +#define MPI2_RAID_ACTION_ENABLE_FAILED_VOLUME (0x1C) +#define MPI2_RAID_ACTION_CREATE_HOT_SPARE (0x1D) +#define MPI2_RAID_ACTION_DELETE_HOT_SPARE (0x1E) +#define MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED (0x20) +#define MPI2_RAID_ACTION_START_RAID_FUNCTION (0x21) +#define MPI2_RAID_ACTION_STOP_RAID_FUNCTION (0x22) + + +/* RAID Volume Creation Structure */ + +/* + * The following define can be customized for the targeted product. + */ +#ifndef MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS +#define MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS (1) +#endif + +typedef struct _MPI2_RAID_VOLUME_PHYSDISK +{ + U8 RAIDSetNum; /* 0x00 */ + U8 PhysDiskMap; /* 0x01 */ + U16 PhysDiskDevHandle; /* 0x02 */ +} MPI2_RAID_VOLUME_PHYSDISK, MPI2_POINTER PTR_MPI2_RAID_VOLUME_PHYSDISK, + Mpi2RaidVolumePhysDisk_t, MPI2_POINTER pMpi2RaidVolumePhysDisk_t; + +/* defines for the PhysDiskMap field */ +#define MPI2_RAIDACTION_PHYSDISK_PRIMARY (0x01) +#define MPI2_RAIDACTION_PHYSDISK_SECONDARY (0x02) + +typedef struct _MPI2_RAID_VOLUME_CREATION_STRUCT +{ + U8 NumPhysDisks; /* 0x00 */ + U8 VolumeType; /* 0x01 */ + U16 Reserved1; /* 0x02 */ + U32 VolumeCreationFlags; /* 0x04 */ + U32 VolumeSettings; /* 0x08 */ + U8 Reserved2; /* 0x0C */ + U8 ResyncRate; /* 0x0D */ + U16 DataScrubDuration; /* 0x0E */ + U64 VolumeMaxLBA; /* 0x10 */ + U32 StripeSize; /* 0x18 */ + U8 Name[16]; /* 0x1C */ + MPI2_RAID_VOLUME_PHYSDISK PhysDisk[MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS];/* 0x2C */ +} MPI2_RAID_VOLUME_CREATION_STRUCT, + MPI2_POINTER PTR_MPI2_RAID_VOLUME_CREATION_STRUCT, + Mpi2RaidVolumeCreationStruct_t, MPI2_POINTER pMpi2RaidVolumeCreationStruct_t; + +/* use MPI2_RAID_VOL_TYPE_ defines from mpi2_cnfg.h for VolumeType */ + +/* defines for the VolumeCreationFlags field */ +#define MPI2_RAID_VOL_CREATION_USE_DEFAULT_SETTINGS (0x80) +#define MPI2_RAID_VOL_CREATION_BACKGROUND_INIT (0x04) +#define MPI2_RAID_VOL_CREATION_LOW_LEVEL_INIT (0x02) +#define MPI2_RAID_VOL_CREATION_MIGRATE_DATA (0x01) + + +/* RAID Online Capacity Expansion Structure */ + +typedef struct _MPI2_RAID_ONLINE_CAPACITY_EXPANSION +{ + U32 Flags; /* 0x00 */ + U16 DevHandle0; /* 0x04 */ + U16 Reserved1; /* 0x06 */ + U16 DevHandle1; /* 0x08 */ + U16 Reserved2; /* 0x0A */ +} MPI2_RAID_ONLINE_CAPACITY_EXPANSION, + MPI2_POINTER PTR_MPI2_RAID_ONLINE_CAPACITY_EXPANSION, + Mpi2RaidOnlineCapacityExpansion_t, + MPI2_POINTER pMpi2RaidOnlineCapacityExpansion_t; + + +/* RAID Volume Indicator Structure */ + +typedef struct _MPI2_RAID_VOL_INDICATOR +{ + U64 TotalBlocks; /* 0x00 */ + U64 BlocksRemaining; /* 0x08 */ + U32 Flags; /* 0x10 */ +} MPI2_RAID_VOL_INDICATOR, MPI2_POINTER PTR_MPI2_RAID_VOL_INDICATOR, + Mpi2RaidVolIndicator_t, MPI2_POINTER pMpi2RaidVolIndicator_t; + +/* defines for RAID Volume Indicator Flags field */ +#define MPI2_RAID_VOL_FLAGS_OP_MASK (0x0000000F) +#define MPI2_RAID_VOL_FLAGS_OP_BACKGROUND_INIT (0x00000000) +#define MPI2_RAID_VOL_FLAGS_OP_ONLINE_CAP_EXPANSION (0x00000001) +#define MPI2_RAID_VOL_FLAGS_OP_CONSISTENCY_CHECK (0x00000002) +#define MPI2_RAID_VOL_FLAGS_OP_RESYNC (0x00000003) + + +/* RAID Action Reply ActionData union */ +typedef union _MPI2_RAID_ACTION_REPLY_DATA +{ + U32 Word[5]; + MPI2_RAID_VOL_INDICATOR RaidVolumeIndicator; + U16 VolDevHandle; + U8 VolumeState; + U8 PhysDiskNum; +} MPI2_RAID_ACTION_REPLY_DATA, MPI2_POINTER PTR_MPI2_RAID_ACTION_REPLY_DATA, + Mpi2RaidActionReplyData_t, MPI2_POINTER pMpi2RaidActionReplyData_t; + +/* use MPI2_RAIDVOL0_SETTING_ defines from mpi2_cnfg.h for MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE action */ + + +/* RAID Action Reply Message */ +typedef struct _MPI2_RAID_ACTION_REPLY +{ + U8 Action; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 VolDevHandle; /* 0x04 */ + U8 PhysDiskNum; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved2; /* 0x0A */ + U16 Reserved3; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + MPI2_RAID_ACTION_REPLY_DATA ActionData; /* 0x14 */ +} MPI2_RAID_ACTION_REPLY, MPI2_POINTER PTR_MPI2_RAID_ACTION_REPLY, + Mpi2RaidActionReply_t, MPI2_POINTER pMpi2RaidActionReply_t; + + +#endif + diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_sas.h b/drivers/scsi/mpt2sas/mpi/mpi2_sas.h new file mode 100644 index 00000000000..8a42b136cf5 --- /dev/null +++ b/drivers/scsi/mpt2sas/mpi/mpi2_sas.h @@ -0,0 +1,282 @@ +/* + * Copyright (c) 2000-2007 LSI Corporation. + * + * + * Name: mpi2_sas.h + * Title: MPI Serial Attached SCSI structures and definitions + * Creation Date: February 9, 2007 + * + * mpi2.h Version: 02.00.02 + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 06-26-07 02.00.01 Added Clear All Persistent Operation to SAS IO Unit + * Control Request. + * 10-02-08 02.00.02 Added Set IOC Parameter Operation to SAS IO Unit Control + * Request. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_SAS_H +#define MPI2_SAS_H + +/* + * Values for SASStatus. + */ +#define MPI2_SASSTATUS_SUCCESS (0x00) +#define MPI2_SASSTATUS_UNKNOWN_ERROR (0x01) +#define MPI2_SASSTATUS_INVALID_FRAME (0x02) +#define MPI2_SASSTATUS_UTC_BAD_DEST (0x03) +#define MPI2_SASSTATUS_UTC_BREAK_RECEIVED (0x04) +#define MPI2_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05) +#define MPI2_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06) +#define MPI2_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07) +#define MPI2_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08) +#define MPI2_SASSTATUS_UTC_WRONG_DESTINATION (0x09) +#define MPI2_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A) +#define MPI2_SASSTATUS_LONG_INFORMATION_UNIT (0x0B) +#define MPI2_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C) +#define MPI2_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D) +#define MPI2_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E) +#define MPI2_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F) +#define MPI2_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10) +#define MPI2_SASSTATUS_DATA_OFFSET_ERROR (0x11) +#define MPI2_SASSTATUS_SDSF_NAK_RECEIVED (0x12) +#define MPI2_SASSTATUS_SDSF_CONNECTION_FAILED (0x13) +#define MPI2_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14) + + +/* + * Values for the SAS DeviceInfo field used in SAS Device Status Change Event + * data and SAS Configuration pages. + */ +#define MPI2_SAS_DEVICE_INFO_SEP (0x00004000) +#define MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000) +#define MPI2_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000) +#define MPI2_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800) +#define MPI2_SAS_DEVICE_INFO_SSP_TARGET (0x00000400) +#define MPI2_SAS_DEVICE_INFO_STP_TARGET (0x00000200) +#define MPI2_SAS_DEVICE_INFO_SMP_TARGET (0x00000100) +#define MPI2_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080) +#define MPI2_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040) +#define MPI2_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020) +#define MPI2_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010) +#define MPI2_SAS_DEVICE_INFO_SATA_HOST (0x00000008) + +#define MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007) +#define MPI2_SAS_DEVICE_INFO_NO_DEVICE (0x00000000) +#define MPI2_SAS_DEVICE_INFO_END_DEVICE (0x00000001) +#define MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002) +#define MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003) + + +/***************************************************************************** +* +* SAS Messages +* +*****************************************************************************/ + +/**************************************************************************** +* SMP Passthrough messages +****************************************************************************/ + +/* SMP Passthrough Request Message */ +typedef struct _MPI2_SMP_PASSTHROUGH_REQUEST +{ + U8 PassthroughFlags; /* 0x00 */ + U8 PhysicalPort; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 RequestDataLength; /* 0x04 */ + U8 SGLFlags; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved1; /* 0x0A */ + U32 Reserved2; /* 0x0C */ + U64 SASAddress; /* 0x10 */ + U32 Reserved3; /* 0x18 */ + U32 Reserved4; /* 0x1C */ + MPI2_SIMPLE_SGE_UNION SGL; /* 0x20 */ +} MPI2_SMP_PASSTHROUGH_REQUEST, MPI2_POINTER PTR_MPI2_SMP_PASSTHROUGH_REQUEST, + Mpi2SmpPassthroughRequest_t, MPI2_POINTER pMpi2SmpPassthroughRequest_t; + +/* values for PassthroughFlags field */ +#define MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80) + +/* values for SGLFlags field are in the SGL section of mpi2.h */ + + +/* SMP Passthrough Reply Message */ +typedef struct _MPI2_SMP_PASSTHROUGH_REPLY +{ + U8 PassthroughFlags; /* 0x00 */ + U8 PhysicalPort; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 ResponseDataLength; /* 0x04 */ + U8 SGLFlags; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved1; /* 0x0A */ + U8 Reserved2; /* 0x0C */ + U8 SASStatus; /* 0x0D */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + U32 Reserved3; /* 0x14 */ + U8 ResponseData[4]; /* 0x18 */ +} MPI2_SMP_PASSTHROUGH_REPLY, MPI2_POINTER PTR_MPI2_SMP_PASSTHROUGH_REPLY, + Mpi2SmpPassthroughReply_t, MPI2_POINTER pMpi2SmpPassthroughReply_t; + +/* values for PassthroughFlags field */ +#define MPI2_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE (0x80) + +/* values for SASStatus field are at the top of this file */ + + +/**************************************************************************** +* SATA Passthrough messages +****************************************************************************/ + +/* SATA Passthrough Request Message */ +typedef struct _MPI2_SATA_PASSTHROUGH_REQUEST +{ + U16 DevHandle; /* 0x00 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 PassthroughFlags; /* 0x04 */ + U8 SGLFlags; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved1; /* 0x0A */ + U32 Reserved2; /* 0x0C */ + U32 Reserved3; /* 0x10 */ + U32 Reserved4; /* 0x14 */ + U32 DataLength; /* 0x18 */ + U8 CommandFIS[20]; /* 0x1C */ + MPI2_SIMPLE_SGE_UNION SGL; /* 0x20 */ +} MPI2_SATA_PASSTHROUGH_REQUEST, MPI2_POINTER PTR_MPI2_SATA_PASSTHROUGH_REQUEST, + Mpi2SataPassthroughRequest_t, MPI2_POINTER pMpi2SataPassthroughRequest_t; + +/* values for PassthroughFlags field */ +#define MPI2_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG (0x0100) +#define MPI2_SATA_PT_REQ_PT_FLAGS_DMA (0x0020) +#define MPI2_SATA_PT_REQ_PT_FLAGS_PIO (0x0010) +#define MPI2_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004) +#define MPI2_SATA_PT_REQ_PT_FLAGS_WRITE (0x0002) +#define MPI2_SATA_PT_REQ_PT_FLAGS_READ (0x0001) + +/* values for SGLFlags field are in the SGL section of mpi2.h */ + + +/* SATA Passthrough Reply Message */ +typedef struct _MPI2_SATA_PASSTHROUGH_REPLY +{ + U16 DevHandle; /* 0x00 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 PassthroughFlags; /* 0x04 */ + U8 SGLFlags; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved1; /* 0x0A */ + U8 Reserved2; /* 0x0C */ + U8 SASStatus; /* 0x0D */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + U8 StatusFIS[20]; /* 0x14 */ + U32 StatusControlRegisters; /* 0x28 */ + U32 TransferCount; /* 0x2C */ +} MPI2_SATA_PASSTHROUGH_REPLY, MPI2_POINTER PTR_MPI2_SATA_PASSTHROUGH_REPLY, + Mpi2SataPassthroughReply_t, MPI2_POINTER pMpi2SataPassthroughReply_t; + +/* values for SASStatus field are at the top of this file */ + + +/**************************************************************************** +* SAS IO Unit Control messages +****************************************************************************/ + +/* SAS IO Unit Control Request Message */ +typedef struct _MPI2_SAS_IOUNIT_CONTROL_REQUEST +{ + U8 Operation; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 DevHandle; /* 0x04 */ + U8 IOCParameter; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved3; /* 0x0A */ + U16 Reserved4; /* 0x0C */ + U8 PhyNum; /* 0x0E */ + U8 PrimFlags; /* 0x0F */ + U32 Primitive; /* 0x10 */ + U8 LookupMethod; /* 0x14 */ + U8 Reserved5; /* 0x15 */ + U16 SlotNumber; /* 0x16 */ + U64 LookupAddress; /* 0x18 */ + U32 IOCParameterValue; /* 0x20 */ + U32 Reserved7; /* 0x24 */ + U32 Reserved8; /* 0x28 */ +} MPI2_SAS_IOUNIT_CONTROL_REQUEST, + MPI2_POINTER PTR_MPI2_SAS_IOUNIT_CONTROL_REQUEST, + Mpi2SasIoUnitControlRequest_t, MPI2_POINTER pMpi2SasIoUnitControlRequest_t; + +/* values for the Operation field */ +#define MPI2_SAS_OP_CLEAR_ALL_PERSISTENT (0x02) +#define MPI2_SAS_OP_PHY_LINK_RESET (0x06) +#define MPI2_SAS_OP_PHY_HARD_RESET (0x07) +#define MPI2_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08) +#define MPI2_SAS_OP_SEND_PRIMITIVE (0x0A) +#define MPI2_SAS_OP_FORCE_FULL_DISCOVERY (0x0B) +#define MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C) +#define MPI2_SAS_OP_REMOVE_DEVICE (0x0D) +#define MPI2_SAS_OP_LOOKUP_MAPPING (0x0E) +#define MPI2_SAS_OP_SET_IOC_PARAMETER (0x0F) +#define MPI2_SAS_OP_PRODUCT_SPECIFIC_MIN (0x80) + +/* values for the PrimFlags field */ +#define MPI2_SAS_PRIMFLAGS_SINGLE (0x08) +#define MPI2_SAS_PRIMFLAGS_TRIPLE (0x02) +#define MPI2_SAS_PRIMFLAGS_REDUNDANT (0x01) + +/* values for the LookupMethod field */ +#define MPI2_SAS_LOOKUP_METHOD_SAS_ADDRESS (0x01) +#define MPI2_SAS_LOOKUP_METHOD_SAS_ENCLOSURE_SLOT (0x02) +#define MPI2_SAS_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03) + + +/* SAS IO Unit Control Reply Message */ +typedef struct _MPI2_SAS_IOUNIT_CONTROL_REPLY +{ + U8 Operation; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 DevHandle; /* 0x04 */ + U8 IOCParameter; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved3; /* 0x0A */ + U16 Reserved4; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ +} MPI2_SAS_IOUNIT_CONTROL_REPLY, + MPI2_POINTER PTR_MPI2_SAS_IOUNIT_CONTROL_REPLY, + Mpi2SasIoUnitControlReply_t, MPI2_POINTER pMpi2SasIoUnitControlReply_t; + + +#endif + + diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_tool.h b/drivers/scsi/mpt2sas/mpi/mpi2_tool.h new file mode 100644 index 00000000000..2ff4e936bd3 --- /dev/null +++ b/drivers/scsi/mpt2sas/mpi/mpi2_tool.h @@ -0,0 +1,249 @@ +/* + * Copyright (c) 2000-2008 LSI Corporation. + * + * + * Name: mpi2_tool.h + * Title: MPI diagnostic tool structures and definitions + * Creation Date: March 26, 2007 + * + * mpi2_tool.h Version: 02.00.02 + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * 12-18-07 02.00.01 Added Diagnostic Buffer Post and Diagnostic Release + * structures and defines. + * 02-29-08 02.00.02 Modified various names to make them 32-character unique. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_TOOL_H +#define MPI2_TOOL_H + +/***************************************************************************** +* +* Toolbox Messages +* +*****************************************************************************/ + +/* defines for the Tools */ +#define MPI2_TOOLBOX_CLEAN_TOOL (0x00) +#define MPI2_TOOLBOX_MEMORY_MOVE_TOOL (0x01) +#define MPI2_TOOLBOX_BEACON_TOOL (0x05) + +/**************************************************************************** +* Toolbox reply +****************************************************************************/ + +typedef struct _MPI2_TOOLBOX_REPLY +{ + U8 Tool; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 Reserved5; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ +} MPI2_TOOLBOX_REPLY, MPI2_POINTER PTR_MPI2_TOOLBOX_REPLY, + Mpi2ToolboxReply_t, MPI2_POINTER pMpi2ToolboxReply_t; + + +/**************************************************************************** +* Toolbox Clean Tool request +****************************************************************************/ + +typedef struct _MPI2_TOOLBOX_CLEAN_REQUEST +{ + U8 Tool; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U32 Flags; /* 0x0C */ + } MPI2_TOOLBOX_CLEAN_REQUEST, MPI2_POINTER PTR_MPI2_TOOLBOX_CLEAN_REQUEST, + Mpi2ToolboxCleanRequest_t, MPI2_POINTER pMpi2ToolboxCleanRequest_t; + +/* values for the Flags field */ +#define MPI2_TOOLBOX_CLEAN_BOOT_SERVICES (0x80000000) +#define MPI2_TOOLBOX_CLEAN_PERSIST_MANUFACT_PAGES (0x40000000) +#define MPI2_TOOLBOX_CLEAN_OTHER_PERSIST_PAGES (0x20000000) +#define MPI2_TOOLBOX_CLEAN_FW_CURRENT (0x10000000) +#define MPI2_TOOLBOX_CLEAN_FW_BACKUP (0x08000000) +#define MPI2_TOOLBOX_CLEAN_MEGARAID (0x02000000) +#define MPI2_TOOLBOX_CLEAN_INITIALIZATION (0x01000000) +#define MPI2_TOOLBOX_CLEAN_FLASH (0x00000004) +#define MPI2_TOOLBOX_CLEAN_SEEPROM (0x00000002) +#define MPI2_TOOLBOX_CLEAN_NVSRAM (0x00000001) + + +/**************************************************************************** +* Toolbox Memory Move request +****************************************************************************/ + +typedef struct _MPI2_TOOLBOX_MEM_MOVE_REQUEST +{ + U8 Tool; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + MPI2_SGE_SIMPLE_UNION SGL; /* 0x0C */ +} MPI2_TOOLBOX_MEM_MOVE_REQUEST, MPI2_POINTER PTR_MPI2_TOOLBOX_MEM_MOVE_REQUEST, + Mpi2ToolboxMemMoveRequest_t, MPI2_POINTER pMpi2ToolboxMemMoveRequest_t; + + +/**************************************************************************** +* Toolbox Beacon Tool request +****************************************************************************/ + +typedef struct _MPI2_TOOLBOX_BEACON_REQUEST +{ + U8 Tool; /* 0x00 */ + U8 Reserved1; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U8 Reserved5; /* 0x0C */ + U8 PhysicalPort; /* 0x0D */ + U8 Reserved6; /* 0x0E */ + U8 Flags; /* 0x0F */ +} MPI2_TOOLBOX_BEACON_REQUEST, MPI2_POINTER PTR_MPI2_TOOLBOX_BEACON_REQUEST, + Mpi2ToolboxBeaconRequest_t, MPI2_POINTER pMpi2ToolboxBeaconRequest_t; + +/* values for the Flags field */ +#define MPI2_TOOLBOX_FLAGS_BEACONMODE_OFF (0x00) +#define MPI2_TOOLBOX_FLAGS_BEACONMODE_ON (0x01) + + +/***************************************************************************** +* +* Diagnostic Buffer Messages +* +*****************************************************************************/ + + +/**************************************************************************** +* Diagnostic Buffer Post request +****************************************************************************/ + +typedef struct _MPI2_DIAG_BUFFER_POST_REQUEST +{ + U8 Reserved1; /* 0x00 */ + U8 BufferType; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U64 BufferAddress; /* 0x0C */ + U32 BufferLength; /* 0x14 */ + U32 Reserved5; /* 0x18 */ + U32 Reserved6; /* 0x1C */ + U32 Flags; /* 0x20 */ + U32 ProductSpecific[23]; /* 0x24 */ +} MPI2_DIAG_BUFFER_POST_REQUEST, MPI2_POINTER PTR_MPI2_DIAG_BUFFER_POST_REQUEST, + Mpi2DiagBufferPostRequest_t, MPI2_POINTER pMpi2DiagBufferPostRequest_t; + +/* values for the BufferType field */ +#define MPI2_DIAG_BUF_TYPE_TRACE (0x00) +#define MPI2_DIAG_BUF_TYPE_SNAPSHOT (0x01) +/* count of the number of buffer types */ +#define MPI2_DIAG_BUF_TYPE_COUNT (0x02) + + +/**************************************************************************** +* Diagnostic Buffer Post reply +****************************************************************************/ + +typedef struct _MPI2_DIAG_BUFFER_POST_REPLY +{ + U8 Reserved1; /* 0x00 */ + U8 BufferType; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 Reserved5; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ + U32 TransferLength; /* 0x14 */ +} MPI2_DIAG_BUFFER_POST_REPLY, MPI2_POINTER PTR_MPI2_DIAG_BUFFER_POST_REPLY, + Mpi2DiagBufferPostReply_t, MPI2_POINTER pMpi2DiagBufferPostReply_t; + + +/**************************************************************************** +* Diagnostic Release request +****************************************************************************/ + +typedef struct _MPI2_DIAG_RELEASE_REQUEST +{ + U8 Reserved1; /* 0x00 */ + U8 BufferType; /* 0x01 */ + U8 ChainOffset; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ +} MPI2_DIAG_RELEASE_REQUEST, MPI2_POINTER PTR_MPI2_DIAG_RELEASE_REQUEST, + Mpi2DiagReleaseRequest_t, MPI2_POINTER pMpi2DiagReleaseRequest_t; + + +/**************************************************************************** +* Diagnostic Buffer Post reply +****************************************************************************/ + +typedef struct _MPI2_DIAG_RELEASE_REPLY +{ + U8 Reserved1; /* 0x00 */ + U8 BufferType; /* 0x01 */ + U8 MsgLength; /* 0x02 */ + U8 Function; /* 0x03 */ + U16 Reserved2; /* 0x04 */ + U8 Reserved3; /* 0x06 */ + U8 MsgFlags; /* 0x07 */ + U8 VP_ID; /* 0x08 */ + U8 VF_ID; /* 0x09 */ + U16 Reserved4; /* 0x0A */ + U16 Reserved5; /* 0x0C */ + U16 IOCStatus; /* 0x0E */ + U32 IOCLogInfo; /* 0x10 */ +} MPI2_DIAG_RELEASE_REPLY, MPI2_POINTER PTR_MPI2_DIAG_RELEASE_REPLY, + Mpi2DiagReleaseReply_t, MPI2_POINTER pMpi2DiagReleaseReply_t; + + +#endif + diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_type.h b/drivers/scsi/mpt2sas/mpi/mpi2_type.h new file mode 100644 index 00000000000..cfde017bf16 --- /dev/null +++ b/drivers/scsi/mpt2sas/mpi/mpi2_type.h @@ -0,0 +1,61 @@ +/* + * Copyright (c) 2000-2007 LSI Corporation. + * + * + * Name: mpi2_type.h + * Title: MPI basic type definitions + * Creation Date: August 16, 2006 + * + * mpi2_type.h Version: 02.00.00 + * + * Version History + * --------------- + * + * Date Version Description + * -------- -------- ------------------------------------------------------ + * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A. + * -------------------------------------------------------------------------- + */ + +#ifndef MPI2_TYPE_H +#define MPI2_TYPE_H + + +/******************************************************************************* + * Define MPI2_POINTER if it hasn't already been defined. By default + * MPI2_POINTER is defined to be a near pointer. MPI2_POINTER can be defined as + * a far pointer by defining MPI2_POINTER as "far *" before this header file is + * included. + */ +#ifndef MPI2_POINTER +#define MPI2_POINTER * +#endif + +/* the basic types may have already been included by mpi_type.h */ +#ifndef MPI_TYPE_H +/***************************************************************************** +* +* Basic Types +* +*****************************************************************************/ + +typedef u8 U8; +typedef __le16 U16; +typedef __le32 U32; +typedef __le64 U64 __attribute__((aligned(4))); + +/***************************************************************************** +* +* Pointer Types +* +*****************************************************************************/ + +typedef U8 *PU8; +typedef U16 *PU16; +typedef U32 *PU32; +typedef U64 *PU64; + +#endif + +#endif + |