diff options
| author | Kashyap, Desai <kashyap.desai@lsi.com> | 2009-08-20 13:23:49 +0530 |
|---|---|---|
| committer | James Bottomley <James.Bottomley@suse.de> | 2009-09-05 09:36:13 -0500 |
| commit | ed79f1280d1bc54f168abcffc8c3e0bf8ffb1873 (patch) | |
| tree | 61974bec8071cd483cd562bd465ed8a2adb09896 /drivers/scsi/mpt2sas/mpt2sas_scsih.c | |
| parent | 34a03bef2202d0c9983a8da0a8abaee37d285847 (diff) | |
[SCSI] mpt2sas: Raid 10 Volume is showing as Raid 1E in dmesg
This patch modifies the slave_configure callback so the messages that get sent
to system log for RAID1E volumes contain the string "RAID10" instead of
"RAID1E". These messages contain information regarding what kind of scsi device
is being added. Certain OEMS can enable displaying the RAID10 string instead of
RAID1E via manufacturing page 10. The driver will read this config page at
driver load time, then determine from the GenericFlags0 bits whether display
the RAID10 or RAID1E string, also even drive count is taken into consideration.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Reviewed-by: Eric Moore <Eric.moore@lsi.com>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Diffstat (limited to 'drivers/scsi/mpt2sas/mpt2sas_scsih.c')
| -rw-r--r-- | drivers/scsi/mpt2sas/mpt2sas_scsih.c | 8 |
1 files changed, 7 insertions, 1 deletions
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 6e6d5af6b36..e71a6c04298 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -1501,7 +1501,13 @@ _scsih_slave_configure(struct scsi_device *sdev) break; case MPI2_RAID_VOL_TYPE_RAID1E: qdepth = MPT2SAS_RAID_QUEUE_DEPTH; - r_level = "RAID1E"; + if (ioc->manu_pg10.OEMIdentifier && + (ioc->manu_pg10.GenericFlags0 & + MFG10_GF0_R10_DISPLAY) && + !(raid_device->num_pds % 2)) + r_level = "RAID10"; + else + r_level = "RAID1E"; break; case MPI2_RAID_VOL_TYPE_RAID1: qdepth = MPT2SAS_RAID_QUEUE_DEPTH; |