[SCSI] mpt2sas: using the same naming convention for all static function

This fix's is for all local function so their name has the "_" preceeding
the module name, then function name.  Most the code is already is using this
naming convention.

Signed-off-by: Eric Moore <eric.moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

1 files changed, 18 insertions, 18 deletions

diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c
index e03dc0b1e1a..e4d858617c8 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_transport.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c
@@ -264,7 +264,7 @@ struct rep_manu_reply{
 };
 
 /**
- * transport_expander_report_manufacture - obtain SMP report_manufacture
+ * _transport_expander_report_manufacture - obtain SMP report_manufacture
  * @ioc: per adapter object
  * @sas_address: expander sas address
  * @edev: the sas_expander_device object
@@ -274,7 +274,7 @@ struct rep_manu_reply{
  * Returns 0 for success, non-zero for failure.
  */
 static int
-transport_expander_report_manufacture(struct MPT2SAS_ADAPTER *ioc,
+_transport_expander_report_manufacture(struct MPT2SAS_ADAPTER *ioc,
     u64 sas_address, struct sas_expander_device *edev)
 {
 	Mpi2SmpPassthroughRequest_t *mpi_request;
@@ -578,7 +578,7 @@ mpt2sas_transport_port_add(struct MPT2SAS_ADAPTER *ioc, u16 handle,
 	    MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER ||
 	    mpt2sas_port->remote_identify.device_type ==
 	    MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER)
-		transport_expander_report_manufacture(ioc,
+		_transport_expander_report_manufacture(ioc,
 		    mpt2sas_port->remote_identify.sas_address,
 		    rphy_to_expander_device(rphy));
 
@@ -852,7 +852,7 @@ rphy_to_ioc(struct sas_rphy *rphy)
 }
 
 /**
- * transport_get_linkerrors -
+ * _transport_get_linkerrors -
  * @phy: The sas phy object
  *
  * Only support sas_host direct attached phys.
@@ -860,7 +860,7 @@ rphy_to_ioc(struct sas_rphy *rphy)
  *
  */
 static int
-transport_get_linkerrors(struct sas_phy *phy)
+_transport_get_linkerrors(struct sas_phy *phy)
 {
 	struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy);
 	struct _sas_phy *mpt2sas_phy;
@@ -903,14 +903,14 @@ transport_get_linkerrors(struct sas_phy *phy)
 }
 
 /**
- * transport_get_enclosure_identifier -
+ * _transport_get_enclosure_identifier -
  * @phy: The sas phy object
  *
  * Obtain the enclosure logical id for an expander.
  * Returns 0 for success, non-zero for failure.
  */
 static int
-transport_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier)
+_transport_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier)
 {
 	struct MPT2SAS_ADAPTER *ioc = rphy_to_ioc(rphy);
 	struct _sas_node *sas_expander;
@@ -929,13 +929,13 @@ transport_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier)
 }
 
 /**
- * transport_get_bay_identifier -
+ * _transport_get_bay_identifier -
  * @phy: The sas phy object
  *
  * Returns the slot id for a device that resides inside an enclosure.
  */
 static int
-transport_get_bay_identifier(struct sas_rphy *rphy)
+_transport_get_bay_identifier(struct sas_rphy *rphy)
 {
 	struct MPT2SAS_ADAPTER *ioc = rphy_to_ioc(rphy);
 	struct _sas_device *sas_device;
@@ -953,7 +953,7 @@ transport_get_bay_identifier(struct sas_rphy *rphy)
 }
 
 /**
- * transport_phy_reset -
+ * _transport_phy_reset -
  * @phy: The sas phy object
  * @hard_reset:
  *
@@ -961,7 +961,7 @@ transport_get_bay_identifier(struct sas_rphy *rphy)
  * Returns 0 for success, non-zero for failure.
  */
 static int
-transport_phy_reset(struct sas_phy *phy, int hard_reset)
+_transport_phy_reset(struct sas_phy *phy, int hard_reset)
 {
 	struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy);
 	struct _sas_phy *mpt2sas_phy;
@@ -1002,7 +1002,7 @@ transport_phy_reset(struct sas_phy *phy, int hard_reset)
 }
 
 /**
- * transport_smp_handler - transport portal for smp passthru
+ * _transport_smp_handler - transport portal for smp passthru
  * @shost: shost object
  * @rphy: sas transport rphy object
  * @req:
@@ -1012,7 +1012,7 @@ transport_phy_reset(struct sas_phy *phy, int hard_reset)
  *           smp_rep_general /sys/class/bsg/expander-5:0
  */
 static int
-transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
+_transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
     struct request *req)
 {
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
@@ -1201,11 +1201,11 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
 }
 
 struct sas_function_template mpt2sas_transport_functions = {
-	.get_linkerrors		= transport_get_linkerrors,
-	.get_enclosure_identifier = transport_get_enclosure_identifier,
-	.get_bay_identifier	= transport_get_bay_identifier,
-	.phy_reset		= transport_phy_reset,
-	.smp_handler		= transport_smp_handler,
+	.get_linkerrors		= _transport_get_linkerrors,
+	.get_enclosure_identifier = _transport_get_enclosure_identifier,
+	.get_bay_identifier	= _transport_get_bay_identifier,
+	.phy_reset		= _transport_phy_reset,
+	.smp_handler		= _transport_smp_handler,
 };
 
 struct scsi_transport_template *mpt2sas_transport_template;