[SCSI] mvsas: add support for 94xx; layout change; bug fixes

This version contains following main changes
  - Switch to new layout to support more types of ASIC.
  - SSP TMF supported and related Error Handing enhanced.
  - Support flash feature with delay 2*HZ when PHY changed.
  - Support Marvell 94xx series ASIC for 6G SAS/SATA, which has 2
88SE64xx chips but any different register description.
  - Support SPI flash for HBA-related configuration info.
  - Other patch enhanced from kernel side such as increasing PHY type

[jejb: fold back in DMA_BIT_MASK changes]
Signed-off-by: Ying Chu <jasonchu@marvell.com>
Signed-off-by: Andy Yan <ayan@marvell.com>
Signed-off-by: Ke Wei <kewei@marvell.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

1 files changed, 222 insertions, 0 deletions

diff --git a/drivers/scsi/mvsas/mv_94xx.h b/drivers/scsi/mvsas/mv_94xx.h
new file mode 100644
index 00000000000..23ed9b16466
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_94xx.h
@@ -0,0 +1,222 @@
+/*
+ * Marvell 88SE94xx hardware specific head file
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+#ifndef _MVS94XX_REG_H_
+#define _MVS94XX_REG_H_
+
+#include <linux/types.h>
+
+#define MAX_LINK_RATE		SAS_LINK_RATE_6_0_GBPS
+
+enum hw_registers {
+	MVS_GBL_CTL		= 0x04,  /* global control */
+	MVS_GBL_INT_STAT	= 0x00,  /* global irq status */
+	MVS_GBL_PI		= 0x0C,  /* ports implemented bitmask */
+
+	MVS_PHY_CTL		= 0x40,  /* SOC PHY Control */
+	MVS_PORTS_IMP		= 0x9C,  /* SOC Port Implemented */
+
+	MVS_GBL_PORT_TYPE	= 0xa0,  /* port type */
+
+	MVS_CTL			= 0x100, /* SAS/SATA port configuration */
+	MVS_PCS			= 0x104, /* SAS/SATA port control/status */
+	MVS_CMD_LIST_LO		= 0x108, /* cmd list addr */
+	MVS_CMD_LIST_HI		= 0x10C,
+	MVS_RX_FIS_LO		= 0x110, /* RX FIS list addr */
+	MVS_RX_FIS_HI		= 0x114,
+	MVS_STP_REG_SET_0	= 0x118, /* STP/SATA Register Set Enable */
+	MVS_STP_REG_SET_1	= 0x11C,
+	MVS_TX_CFG		= 0x120, /* TX configuration */
+	MVS_TX_LO		= 0x124, /* TX (delivery) ring addr */
+	MVS_TX_HI		= 0x128,
+
+	MVS_TX_PROD_IDX		= 0x12C, /* TX producer pointer */
+	MVS_TX_CONS_IDX		= 0x130, /* TX consumer pointer (RO) */
+	MVS_RX_CFG		= 0x134, /* RX configuration */
+	MVS_RX_LO		= 0x138, /* RX (completion) ring addr */
+	MVS_RX_HI		= 0x13C,
+	MVS_RX_CONS_IDX		= 0x140, /* RX consumer pointer (RO) */
+
+	MVS_INT_COAL		= 0x148, /* Int coalescing config */
+	MVS_INT_COAL_TMOUT	= 0x14C, /* Int coalescing timeout */
+	MVS_INT_STAT		= 0x150, /* Central int status */
+	MVS_INT_MASK		= 0x154, /* Central int enable */
+	MVS_INT_STAT_SRS_0	= 0x158, /* SATA register set status */
+	MVS_INT_MASK_SRS_0	= 0x15C,
+	MVS_INT_STAT_SRS_1	= 0x160,
+	MVS_INT_MASK_SRS_1	= 0x164,
+	MVS_NON_NCQ_ERR_0	= 0x168, /* SRS Non-specific NCQ Error */
+	MVS_NON_NCQ_ERR_1	= 0x16C,
+	MVS_CMD_ADDR		= 0x170, /* Command register port (addr) */
+	MVS_CMD_DATA		= 0x174, /* Command register port (data) */
+	MVS_MEM_PARITY_ERR	= 0x178, /* Memory parity error */
+
+					 /* ports 1-3 follow after this */
+	MVS_P0_INT_STAT		= 0x180, /* port0 interrupt status */
+	MVS_P0_INT_MASK		= 0x184, /* port0 interrupt mask */
+					 /* ports 5-7 follow after this */
+	MVS_P4_INT_STAT		= 0x1A0, /* Port4 interrupt status */
+	MVS_P4_INT_MASK		= 0x1A4, /* Port4 interrupt enable mask */
+
+					 /* ports 1-3 follow after this */
+	MVS_P0_SER_CTLSTAT	= 0x1D0, /* port0 serial control/status */
+					 /* ports 5-7 follow after this */
+	MVS_P4_SER_CTLSTAT	= 0x1E0, /* port4 serial control/status */
+
+					 /* ports 1-3 follow after this */
+	MVS_P0_CFG_ADDR		= 0x200, /* port0 phy register address */
+	MVS_P0_CFG_DATA		= 0x204, /* port0 phy register data */
+					 /* ports 5-7 follow after this */
+	MVS_P4_CFG_ADDR		= 0x220, /* Port4 config address */
+	MVS_P4_CFG_DATA		= 0x224, /* Port4 config data */
+
+					 /* phys 1-3 follow after this */
+	MVS_P0_VSR_ADDR		= 0x250, /* phy0 VSR address */
+	MVS_P0_VSR_DATA		= 0x254, /* phy0 VSR data */
+					 /* phys 1-3 follow after this */
+					 /* multiplexing */
+	MVS_P4_VSR_ADDR 	= 0x250, /* phy4 VSR address */
+	MVS_P4_VSR_DATA 	= 0x254, /* phy4 VSR data */
+	MVS_PA_VSR_ADDR		= 0x290, /* All port VSR addr */
+	MVS_PA_VSR_PORT		= 0x294, /* All port VSR data */
+};
+
+enum pci_cfg_registers {
+	PCR_PHY_CTL		= 0x40,
+	PCR_PHY_CTL2		= 0x90,
+	PCR_DEV_CTRL		= 0x78,
+	PCR_LINK_STAT		= 0x82,
+};
+
+/*  SAS/SATA Vendor Specific Port Registers */
+enum sas_sata_vsp_regs {
+	VSR_PHY_STAT		= 0x00 * 4, /* Phy Status */
+	VSR_PHY_MODE1		= 0x01 * 4, /* phy tx */
+	VSR_PHY_MODE2		= 0x02 * 4, /* tx scc */
+	VSR_PHY_MODE3		= 0x03 * 4, /* pll */
+	VSR_PHY_MODE4		= 0x04 * 4, /* VCO */
+	VSR_PHY_MODE5		= 0x05 * 4, /* Rx */
+	VSR_PHY_MODE6		= 0x06 * 4, /* CDR */
+	VSR_PHY_MODE7		= 0x07 * 4, /* Impedance */
+	VSR_PHY_MODE8		= 0x08 * 4, /* Voltage */
+	VSR_PHY_MODE9		= 0x09 * 4, /* Test */
+	VSR_PHY_MODE10		= 0x0A * 4, /* Power */
+	VSR_PHY_MODE11		= 0x0B * 4, /* Phy Mode */
+	VSR_PHY_VS0		= 0x0C * 4, /* Vednor Specific 0 */
+	VSR_PHY_VS1		= 0x0D * 4, /* Vednor Specific 1 */
+};
+
+enum chip_register_bits {
+	PHY_MIN_SPP_PHYS_LINK_RATE_MASK = (0x7 << 8),
+	PHY_MAX_SPP_PHYS_LINK_RATE_MASK = (0x7 << 8),
+	PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET = (12),
+	PHY_NEG_SPP_PHYS_LINK_RATE_MASK =
+			(0x3 << PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET),
+};
+
+enum pci_interrupt_cause {
+	/*  MAIN_IRQ_CAUSE (R10200) Bits*/
+	IRQ_COM_IN_I2O_IOP0            = (1 << 0),
+	IRQ_COM_IN_I2O_IOP1            = (1 << 1),
+	IRQ_COM_IN_I2O_IOP2            = (1 << 2),
+	IRQ_COM_IN_I2O_IOP3            = (1 << 3),
+	IRQ_COM_OUT_I2O_HOS0           = (1 << 4),
+	IRQ_COM_OUT_I2O_HOS1           = (1 << 5),
+	IRQ_COM_OUT_I2O_HOS2           = (1 << 6),
+	IRQ_COM_OUT_I2O_HOS3           = (1 << 7),
+	IRQ_PCIF_TO_CPU_DRBL0          = (1 << 8),
+	IRQ_PCIF_TO_CPU_DRBL1          = (1 << 9),
+	IRQ_PCIF_TO_CPU_DRBL2          = (1 << 10),
+	IRQ_PCIF_TO_CPU_DRBL3          = (1 << 11),
+	IRQ_PCIF_DRBL0                 = (1 << 12),
+	IRQ_PCIF_DRBL1                 = (1 << 13),
+	IRQ_PCIF_DRBL2                 = (1 << 14),
+	IRQ_PCIF_DRBL3                 = (1 << 15),
+	IRQ_XOR_A                      = (1 << 16),
+	IRQ_XOR_B                      = (1 << 17),
+	IRQ_SAS_A                      = (1 << 18),
+	IRQ_SAS_B                      = (1 << 19),
+	IRQ_CPU_CNTRL                  = (1 << 20),
+	IRQ_GPIO                       = (1 << 21),
+	IRQ_UART                       = (1 << 22),
+	IRQ_SPI                        = (1 << 23),
+	IRQ_I2C                        = (1 << 24),
+	IRQ_SGPIO                      = (1 << 25),
+	IRQ_COM_ERR                    = (1 << 29),
+	IRQ_I2O_ERR                    = (1 << 30),
+	IRQ_PCIE_ERR                   = (1 << 31),
+};
+
+#define MAX_SG_ENTRY		255
+
+struct mvs_prd_imt {
+	__le32			len:22;
+	u8			_r_a:2;
+	u8			misc_ctl:4;
+	u8			inter_sel:4;
+};
+
+struct mvs_prd {
+	/* 64-bit buffer address */
+	__le64			addr;
+	/* 22-bit length */
+	struct mvs_prd_imt	im_len;
+} __attribute__ ((packed));
+
+#define SPI_CTRL_REG_94XX           	0xc800
+#define SPI_ADDR_REG_94XX            	0xc804
+#define SPI_WR_DATA_REG_94XX         0xc808
+#define SPI_RD_DATA_REG_94XX         	0xc80c
+#define SPI_CTRL_READ_94XX         	(1U << 2)
+#define SPI_ADDR_VLD_94XX         	(1U << 1)
+#define SPI_CTRL_SpiStart_94XX     	(1U << 0)
+
+#define mv_ffc(x)   ffz(x)
+
+static inline int
+mv_ffc64(u64 v)
+{
+	int i;
+	i = mv_ffc((u32)v);
+	if (i >= 0)
+		return i;
+	i = mv_ffc((u32)(v>>32));
+
+	if (i != 0)
+		return 32 + i;
+
+	return -1;
+}
+
+#define r_reg_set_enable(i) \
+	(((i) > 31) ? mr32(MVS_STP_REG_SET_1) : \
+	mr32(MVS_STP_REG_SET_0))
+
+#define w_reg_set_enable(i, tmp) \
+	(((i) > 31) ? mw32(MVS_STP_REG_SET_1, tmp) : \
+	mw32(MVS_STP_REG_SET_0, tmp))
+
+extern const struct mvs_dispatch mvs_94xx_dispatch;
+#endif
+