Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 664 insertions, 0 deletions

diff --git a/drivers/scsi/nsp32.h b/drivers/scsi/nsp32.h
new file mode 100644
index 00000000000..5664398fa0a
--- /dev/null
+++ b/drivers/scsi/nsp32.h
@@ -0,0 +1,664 @@
+/*
+ * Workbit NinjaSCSI-32Bi/UDE PCI/CardBus SCSI Host Bus Adapter driver
+ * Basic data header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#ifndef _NSP32_H
+#define _NSP32_H
+
+//#define NSP32_DEBUG 9
+
+/*
+ * VENDOR/DEVICE ID
+ */
+#define PCI_VENDOR_ID_IODATA  0x10fc
+#define PCI_VENDOR_ID_WORKBIT 0x1145
+
+#define PCI_DEVICE_ID_NINJASCSI_32BI_CBSC_II   0x0005
+#define PCI_DEVICE_ID_NINJASCSI_32BI_KME       0xf007
+#define PCI_DEVICE_ID_NINJASCSI_32BI_WBT       0x8007
+#define PCI_DEVICE_ID_WORKBIT_STANDARD         0xf010
+#define PCI_DEVICE_ID_WORKBIT_DUALEDGE         0xf011
+#define PCI_DEVICE_ID_NINJASCSI_32BI_LOGITEC   0xf012
+#define PCI_DEVICE_ID_NINJASCSI_32BIB_LOGITEC  0xf013
+#define PCI_DEVICE_ID_NINJASCSI_32UDE_MELCO    0xf015
+#define PCI_DEVICE_ID_NINJASCSI_32UDE_MELCO_II 0x8009
+
+/*
+ * MODEL
+ */
+enum {
+	MODEL_IODATA        = 0,
+	MODEL_KME           = 1,
+	MODEL_WORKBIT       = 2,
+	MODEL_LOGITEC       = 3,
+	MODEL_PCI_WORKBIT   = 4,
+	MODEL_PCI_LOGITEC   = 5,
+	MODEL_PCI_MELCO     = 6,
+};
+
+static char * nsp32_model[] = {
+	"I-O DATA CBSC-II CardBus card",
+	"KME SCSI CardBus card",
+	"Workbit duo SCSI CardBus card",
+	"Logitec CardBus card with external ROM",
+	"Workbit / I-O DATA PCI card",
+	"Logitec PCI card with external ROM",
+	"Melco CardBus/PCI card with external ROM",
+};
+
+
+/*
+ * SCSI Generic Definitions
+ */
+#define EXTENDED_SDTR_LEN	0x03
+
+/* Little Endian */
+typedef u32 u32_le;
+typedef u16 u16_le;
+
+/*
+ * MACRO
+ */
+#define BIT(x)      (1UL << (x))
+
+/*
+ * BASIC Definitions
+ */
+#ifndef TRUE
+# define TRUE  1
+#endif
+#ifndef FALSE
+# define FALSE 0
+#endif
+#define ASSERT 1
+#define NEGATE 0
+
+
+/*******************/
+/* normal register */
+/*******************/
+/*
+ * Don't access below register with Double Word:
+ * +00, +04, +08, +0c, +64, +80, +84, +88, +90, +c4, +c8, +cc, +d0.
+ */
+#define IRQ_CONTROL 0x00	/* BASE+00, W, W */
+#define IRQ_STATUS  0x00	/* BASE+00, W, R */
+# define IRQSTATUS_LATCHED_MSG      BIT(0)
+# define IRQSTATUS_LATCHED_IO       BIT(1)
+# define IRQSTATUS_LATCHED_CD       BIT(2)
+# define IRQSTATUS_LATCHED_BUS_FREE BIT(3)
+# define IRQSTATUS_RESELECT_OCCUER  BIT(4)
+# define IRQSTATUS_PHASE_CHANGE_IRQ BIT(5)
+# define IRQSTATUS_SCSIRESET_IRQ    BIT(6)
+# define IRQSTATUS_TIMER_IRQ        BIT(7)
+# define IRQSTATUS_FIFO_SHLD_IRQ    BIT(8)
+# define IRQSTATUS_PCI_IRQ	    BIT(9)
+# define IRQSTATUS_BMCNTERR_IRQ     BIT(10)
+# define IRQSTATUS_AUTOSCSI_IRQ     BIT(11)
+# define PCI_IRQ_MASK               BIT(12)
+# define TIMER_IRQ_MASK             BIT(13)
+# define FIFO_IRQ_MASK              BIT(14)
+# define SCSI_IRQ_MASK              BIT(15)
+# define IRQ_CONTROL_ALL_IRQ_MASK   (PCI_IRQ_MASK   | \
+                                     TIMER_IRQ_MASK | \
+                                     FIFO_IRQ_MASK  | \
+                                     SCSI_IRQ_MASK  )
+# define IRQSTATUS_ANY_IRQ          (IRQSTATUS_RESELECT_OCCUER	| \
+				     IRQSTATUS_PHASE_CHANGE_IRQ	| \
+				     IRQSTATUS_SCSIRESET_IRQ	| \
+				     IRQSTATUS_TIMER_IRQ	| \
+				     IRQSTATUS_FIFO_SHLD_IRQ	| \
+				     IRQSTATUS_PCI_IRQ		| \
+				     IRQSTATUS_BMCNTERR_IRQ	| \
+				     IRQSTATUS_AUTOSCSI_IRQ	)
+
+#define TRANSFER_CONTROL	0x02	/* BASE+02, W, W */
+#define TRANSFER_STATUS		0x02	/* BASE+02, W, R */
+# define CB_MMIO_MODE        BIT(0)
+# define CB_IO_MODE          BIT(1)
+# define BM_TEST             BIT(2)
+# define BM_TEST_DIR         BIT(3)
+# define DUAL_EDGE_ENABLE    BIT(4)
+# define NO_TRANSFER_TO_HOST BIT(5)
+# define TRANSFER_GO         BIT(7)
+# define BLIEND_MODE         BIT(8)
+# define BM_START            BIT(9)
+# define ADVANCED_BM_WRITE   BIT(10)
+# define BM_SINGLE_MODE      BIT(11)
+# define FIFO_TRUE_FULL      BIT(12)
+# define FIFO_TRUE_EMPTY     BIT(13)
+# define ALL_COUNTER_CLR     BIT(14)
+# define FIFOTEST            BIT(15)
+
+#define INDEX_REG		0x04	/* BASE+04, Byte(R/W), Word(R) */
+
+#define TIMER_SET		0x06	/* BASE+06, W, R/W */
+# define TIMER_CNT_MASK (0xff)
+# define TIMER_STOP     BIT(8)
+
+#define DATA_REG_LOW		0x08	/* BASE+08, LowW, R/W */
+#define DATA_REG_HI		0x0a	/* BASE+0a, Hi-W, R/W */
+
+#define FIFO_REST_CNT		0x0c	/* BASE+0c, W, R/W */
+# define FIFO_REST_MASK       0x1ff
+# define FIFO_EMPTY_SHLD_FLAG BIT(14)
+# define FIFO_FULL_SHLD_FLAG  BIT(15)
+
+#define SREQ_SMPL_RATE		0x0f	/* BASE+0f, B, R/W */
+# define SREQSMPLRATE_RATE0 BIT(0)
+# define SREQSMPLRATE_RATE1 BIT(1)
+# define SAMPLING_ENABLE    BIT(2)
+#  define SMPL_40M (0)                   /* 40MHz:   0-100ns/period */
+#  define SMPL_20M (SREQSMPLRATE_RATE0)  /* 20MHz: 100-200ns/period */
+#  define SMPL_10M (SREQSMPLRATE_RATE1)  /* 10Mhz: 200-   ns/period */
+
+#define SCSI_BUS_CONTROL	0x10	/* BASE+10, B, R/W */
+# define BUSCTL_SEL         BIT(0)
+# define BUSCTL_RST         BIT(1)
+# define BUSCTL_DATAOUT_ENB BIT(2)
+# define BUSCTL_ATN         BIT(3)
+# define BUSCTL_ACK         BIT(4)
+# define BUSCTL_BSY         BIT(5)
+# define AUTODIRECTION      BIT(6)
+# define ACKENB             BIT(7)
+
+#define CLR_COUNTER		0x12	/* BASE+12, B, W */
+# define ACK_COUNTER_CLR       BIT(0)
+# define SREQ_COUNTER_CLR      BIT(1)
+# define FIFO_HOST_POINTER_CLR BIT(2)
+# define FIFO_REST_COUNT_CLR   BIT(3)
+# define BM_COUNTER_CLR        BIT(4)
+# define SAVED_ACK_CLR         BIT(5)
+# define CLRCOUNTER_ALLMASK    (ACK_COUNTER_CLR       | \
+                                SREQ_COUNTER_CLR      | \
+                                FIFO_HOST_POINTER_CLR | \
+                                FIFO_REST_COUNT_CLR   | \
+                                BM_COUNTER_CLR        | \
+                                SAVED_ACK_CLR         )
+
+#define SCSI_BUS_MONITOR	0x12	/* BASE+12, B, R */
+# define BUSMON_MSG BIT(0)
+# define BUSMON_IO  BIT(1)
+# define BUSMON_CD  BIT(2)
+# define BUSMON_BSY BIT(3)
+# define BUSMON_ACK BIT(4)
+# define BUSMON_REQ BIT(5)
+# define BUSMON_SEL BIT(6)
+# define BUSMON_ATN BIT(7)
+
+#define COMMAND_DATA		0x14	/* BASE+14, B, R/W */
+
+#define PARITY_CONTROL		0x16	/* BASE+16, B, W */
+# define PARITY_CHECK_ENABLE BIT(0)
+# define PARITY_ERROR_CLEAR  BIT(1)
+#define PARITY_STATUS		0x16	/* BASE+16, B, R */
+//# define PARITY_CHECK_ENABLE BIT(0)
+# define PARITY_ERROR_NORMAL BIT(1)
+# define PARITY_ERROR_LSB    BIT(1)
+# define PARITY_ERROR_MSB    BIT(2)
+
+#define RESELECT_ID		0x18	/* BASE+18, B, R */
+
+#define COMMAND_CONTROL		0x18	/* BASE+18, W, W */
+# define CLEAR_CDB_FIFO_POINTER BIT(0)
+# define AUTO_COMMAND_PHASE     BIT(1)
+# define AUTOSCSI_START         BIT(2)
+# define AUTOSCSI_RESTART       BIT(3)
+# define AUTO_PARAMETER         BIT(4)
+# define AUTO_ATN               BIT(5)
+# define AUTO_MSGIN_00_OR_04    BIT(6)
+# define AUTO_MSGIN_02          BIT(7)
+# define AUTO_MSGIN_03          BIT(8)
+
+#define SET_ARBIT		0x1a	/* BASE+1a, B, W */
+# define ARBIT_GO    BIT(0)
+# define ARBIT_CLEAR BIT(1)
+
+#define ARBIT_STATUS		0x1a	/* BASE+1a, B, R */
+//# define ARBIT_GO             BIT(0)
+# define ARBIT_WIN            BIT(1)
+# define ARBIT_FAIL           BIT(2)
+# define AUTO_PARAMETER_VALID BIT(3)
+# define SGT_VALID            BIT(4)
+
+#define SYNC_REG		0x1c	/* BASE+1c, B, R/W */
+
+#define ACK_WIDTH		0x1d	/* BASE+1d, B, R/W */
+
+#define SCSI_DATA_WITH_ACK	0x20	/* BASE+20, B, R/W */
+#define SCSI_OUT_LATCH_TARGET_ID 0x22	/* BASE+22, B, W */
+#define SCSI_DATA_IN		0x22	/* BASE+22, B, R */
+
+#define SCAM_CONTROL		0x24	/* BASE+24, B, W */
+#define SCAM_STATUS		0x24	/* BASE+24, B, R */
+# define SCAM_MSG    BIT(0)
+# define SCAM_IO     BIT(1)
+# define SCAM_CD     BIT(2)
+# define SCAM_BSY    BIT(3)
+# define SCAM_SEL    BIT(4)
+# define SCAM_XFEROK BIT(5)
+
+#define SCAM_DATA		0x26	/* BASE+26, B, R/W */
+# define SD0	BIT(0)
+# define SD1	BIT(1)
+# define SD2	BIT(2)
+# define SD3	BIT(3)
+# define SD4	BIT(4)
+# define SD5	BIT(5)
+# define SD6	BIT(6)
+# define SD7	BIT(7)
+
+#define SACK_CNT		0x28	/* BASE+28, DW, R/W */
+#define SREQ_CNT		0x2c	/* BASE+2c, DW, R/W */
+
+#define FIFO_DATA_LOW		0x30	/* BASE+30, B/W/DW, R/W */
+#define FIFO_DATA_HIGH		0x32	/* BASE+32, B/W, R/W */
+#define BM_START_ADR		0x34	/* BASE+34, DW, R/W */
+
+#define BM_CNT			0x38	/* BASE+38, DW, R/W */
+# define BM_COUNT_MASK 0x0001ffffUL
+# define SGTEND        BIT(31)      /* Last SGT marker */
+
+#define SGT_ADR			0x3c	/* BASE+3c, DW, R/W */
+#define WAIT_REG		0x40	/* Bi only */
+
+#define SCSI_EXECUTE_PHASE	0x40	/* BASE+40, W, R */
+# define COMMAND_PHASE     BIT(0)
+# define DATA_IN_PHASE     BIT(1)
+# define DATA_OUT_PHASE    BIT(2)
+# define MSGOUT_PHASE      BIT(3)
+# define STATUS_PHASE      BIT(4)
+# define ILLEGAL_PHASE     BIT(5)
+# define BUS_FREE_OCCUER   BIT(6)
+# define MSG_IN_OCCUER     BIT(7)
+# define MSG_OUT_OCCUER    BIT(8)
+# define SELECTION_TIMEOUT BIT(9)
+# define MSGIN_00_VALID    BIT(10)
+# define MSGIN_02_VALID    BIT(11)
+# define MSGIN_03_VALID    BIT(12)
+# define MSGIN_04_VALID    BIT(13)
+# define AUTOSCSI_BUSY     BIT(15)
+
+#define SCSI_CSB_IN		0x42	/* BASE+42, B, R */
+
+#define SCSI_MSG_OUT		0x44	/* BASE+44, DW, R/W */
+# define MSGOUT_COUNT_MASK (BIT(0)|BIT(1))
+# define MV_VALID	    BIT(7)
+
+#define SEL_TIME_OUT		0x48	/* BASE+48, W, R/W */
+#define SAVED_SACK_CNT		0x4c	/* BASE+4c, DW, R */
+
+#define HTOSDATADELAY		0x50	/* BASE+50, B, R/W */
+#define STOHDATADELAY		0x54	/* BASE+54, B, R/W */
+#define ACKSUMCHECKRD		0x58	/* BASE+58, W, R */
+#define REQSUMCHECKRD		0x5c	/* BASE+5c, W, R */
+
+
+/********************/
+/* indexed register */
+/********************/
+
+#define CLOCK_DIV		0x00	/* BASE+08, IDX+00, B, R/W */
+# define CLOCK_2  BIT(0)	/* MCLK/2 */
+# define CLOCK_4  BIT(1)	/* MCLK/4 */
+# define PCICLK	  BIT(7)	/* PCICLK (33MHz) */
+
+#define TERM_PWR_CONTROL	0x01	/* BASE+08, IDX+01, B, R/W */
+# define BPWR  BIT(0)
+# define SENSE BIT(1)	/* Read Only */
+
+#define EXT_PORT_DDR		0x02	/* BASE+08, IDX+02, B, R/W */
+#define EXT_PORT		0x03	/* BASE+08, IDX+03, B, R/W */
+# define LED_ON	 (0)
+# define LED_OFF BIT(0)
+
+#define IRQ_SELECT		0x04	/* BASE+08, IDX+04, W, R/W */
+# define IRQSELECT_RESELECT_IRQ      BIT(0)
+# define IRQSELECT_PHASE_CHANGE_IRQ  BIT(1)
+# define IRQSELECT_SCSIRESET_IRQ     BIT(2)
+# define IRQSELECT_TIMER_IRQ         BIT(3)
+# define IRQSELECT_FIFO_SHLD_IRQ     BIT(4)
+# define IRQSELECT_TARGET_ABORT_IRQ  BIT(5)
+# define IRQSELECT_MASTER_ABORT_IRQ  BIT(6)
+# define IRQSELECT_SERR_IRQ          BIT(7)
+# define IRQSELECT_PERR_IRQ          BIT(8)
+# define IRQSELECT_BMCNTERR_IRQ      BIT(9)
+# define IRQSELECT_AUTO_SCSI_SEQ_IRQ BIT(10)
+
+#define OLD_SCSI_PHASE		0x05	/* BASE+08, IDX+05, B, R */
+# define OLD_MSG  BIT(0)
+# define OLD_IO   BIT(1)
+# define OLD_CD   BIT(2)
+# define OLD_BUSY BIT(3)
+
+#define FIFO_FULL_SHLD_COUNT	0x06	/* BASE+08, IDX+06, B, R/W */
+#define FIFO_EMPTY_SHLD_COUNT	0x07	/* BASE+08, IDX+07, B, R/W */
+
+#define EXP_ROM_CONTROL		0x08	/* BASE+08, IDX+08, B, R/W */ /* external ROM control */
+# define ROM_WRITE_ENB BIT(0)
+# define IO_ACCESS_ENB BIT(1)
+# define ROM_ADR_CLEAR BIT(2)
+
+#define EXP_ROM_ADR		0x09	/* BASE+08, IDX+09, W, R/W */
+
+#define EXP_ROM_DATA		0x0a	/* BASE+08, IDX+0a, B, R/W */
+
+#define CHIP_MODE		0x0b	/* BASE+08, IDX+0b, B, R   */ /* NinjaSCSI-32Bi only */
+# define OEM0 BIT(1)  /* OEM select */ /* 00=I-O DATA, 01=KME, 10=Workbit, 11=Ext ROM */
+# define OEM1 BIT(2)  /* OEM select */
+# define OPTB BIT(3)  /* KME mode select */
+# define OPTC BIT(4)  /* KME mode select */
+# define OPTD BIT(5)  /* KME mode select */
+# define OPTE BIT(6)  /* KME mode select */
+# define OPTF BIT(7)  /* Power management */
+
+#define MISC_WR			0x0c	/* BASE+08, IDX+0c, W, R/W */
+#define MISC_RD			0x0c
+# define SCSI_DIRECTION_DETECTOR_SELECT BIT(0)
+# define SCSI2_HOST_DIRECTION_VALID	BIT(1)	/* Read only */
+# define HOST2_SCSI_DIRECTION_VALID	BIT(2)	/* Read only */
+# define DELAYED_BMSTART                BIT(3)
+# define MASTER_TERMINATION_SELECT      BIT(4)
+# define BMREQ_NEGATE_TIMING_SEL        BIT(5)
+# define AUTOSEL_TIMING_SEL             BIT(6)
+# define MISC_MABORT_MASK		BIT(7)
+# define BMSTOP_CHANGE2_NONDATA_PHASE	BIT(8)
+
+#define BM_CYCLE		0x0d	/* BASE+08, IDX+0d, B, R/W */
+# define BM_CYCLE0		 BIT(0)
+# define BM_CYCLE1		 BIT(1)
+# define BM_FRAME_ASSERT_TIMING	 BIT(2)
+# define BM_IRDY_ASSERT_TIMING	 BIT(3)
+# define BM_SINGLE_BUS_MASTER	 BIT(4)
+# define MEMRD_CMD0              BIT(5)
+# define SGT_AUTO_PARA_MEMED_CMD BIT(6)
+# define MEMRD_CMD1              BIT(7)
+
+
+#define SREQ_EDGH		0x0e	/* BASE+08, IDX+0e, B, W */
+# define SREQ_EDGH_SELECT BIT(0)
+
+#define UP_CNT			0x0f	/* BASE+08, IDX+0f, B, W */
+# define REQCNT_UP  BIT(0)
+# define ACKCNT_UP  BIT(1)
+# define BMADR_UP   BIT(4)
+# define BMCNT_UP   BIT(5)
+# define SGT_CNT_UP BIT(7)
+
+#define CFG_CMD_STR		0x10	/* BASE+08, IDX+10, W, R */
+#define CFG_LATE_CACHE		0x11	/* BASE+08, IDX+11, W, R/W */
+#define CFG_BASE_ADR_1		0x12	/* BASE+08, IDX+12, W, R */
+#define CFG_BASE_ADR_2		0x13	/* BASE+08, IDX+13, W, R */
+#define CFG_INLINE		0x14	/* BASE+08, IDX+14, W, R */
+
+#define SERIAL_ROM_CTL		0x15	/* BASE+08, IDX+15, B, R */
+# define SCL BIT(0)
+# define ENA BIT(1)
+# define SDA BIT(2)
+
+#define FIFO_HST_POINTER	0x16	/* BASE+08, IDX+16, B, R/W */
+#define SREQ_DELAY		0x17	/* BASE+08, IDX+17, B, R/W */
+#define SACK_DELAY		0x18	/* BASE+08, IDX+18, B, R/W */
+#define SREQ_NOISE_CANCEL	0x19	/* BASE+08, IDX+19, B, R/W */
+#define SDP_NOISE_CANCEL	0x1a	/* BASE+08, IDX+1a, B, R/W */
+#define DELAY_TEST		0x1b	/* BASE+08, IDX+1b, B, R/W */
+#define SD0_NOISE_CANCEL	0x20	/* BASE+08, IDX+20, B, R/W */
+#define SD1_NOISE_CANCEL	0x21	/* BASE+08, IDX+21, B, R/W */
+#define SD2_NOISE_CANCEL	0x22	/* BASE+08, IDX+22, B, R/W */
+#define SD3_NOISE_CANCEL	0x23	/* BASE+08, IDX+23, B, R/W */
+#define SD4_NOISE_CANCEL	0x24	/* BASE+08, IDX+24, B, R/W */
+#define SD5_NOISE_CANCEL	0x25	/* BASE+08, IDX+25, B, R/W */
+#define SD6_NOISE_CANCEL	0x26	/* BASE+08, IDX+26, B, R/W */
+#define SD7_NOISE_CANCEL	0x27	/* BASE+08, IDX+27, B, R/W */
+
+
+/*
+ * Useful Bus Monitor status combinations.
+ */
+#define BUSMON_BUS_FREE    0
+#define BUSMON_COMMAND     ( BUSMON_BSY |                          BUSMON_CD | BUSMON_REQ )
+#define BUSMON_MESSAGE_IN  ( BUSMON_BSY | BUSMON_MSG | BUSMON_IO | BUSMON_CD | BUSMON_REQ )
+#define BUSMON_MESSAGE_OUT ( BUSMON_BSY | BUSMON_MSG |             BUSMON_CD | BUSMON_REQ )
+#define BUSMON_DATA_IN     ( BUSMON_BSY |              BUSMON_IO |             BUSMON_REQ )
+#define BUSMON_DATA_OUT    ( BUSMON_BSY |                                      BUSMON_REQ )
+#define BUSMON_STATUS      ( BUSMON_BSY |              BUSMON_IO | BUSMON_CD | BUSMON_REQ )
+#define BUSMON_RESELECT    (                           BUSMON_IO                          | BUSMON_SEL)
+#define BUSMON_PHASE_MASK  (              BUSMON_MSG | BUSMON_IO | BUSMON_CD              | BUSMON_SEL)
+
+#define BUSPHASE_COMMAND     ( BUSMON_COMMAND     & BUSMON_PHASE_MASK )
+#define BUSPHASE_MESSAGE_IN  ( BUSMON_MESSAGE_IN  & BUSMON_PHASE_MASK )
+#define BUSPHASE_MESSAGE_OUT ( BUSMON_MESSAGE_OUT & BUSMON_PHASE_MASK )
+#define BUSPHASE_DATA_IN     ( BUSMON_DATA_IN     & BUSMON_PHASE_MASK )
+#define BUSPHASE_DATA_OUT    ( BUSMON_DATA_OUT    & BUSMON_PHASE_MASK )
+#define BUSPHASE_STATUS      ( BUSMON_STATUS      & BUSMON_PHASE_MASK )
+#define BUSPHASE_SELECT      ( BUSMON_SEL | BUSMON_IO )
+
+
+/************************************************************************
+ * structure for DMA/Scatter Gather list
+ */
+#define NSP32_SG_SIZE		SG_ALL
+
+typedef struct _nsp32_sgtable {
+	/* values must be little endian */
+	u32_le addr; /* transfer address */
+	u32_le len;  /* transfer length. BIT(31) is for SGT_END mark */
+} __attribute__ ((packed)) nsp32_sgtable;
+
+typedef struct _nsp32_sglun {
+	nsp32_sgtable sgt[NSP32_SG_SIZE+1];	/* SG table */
+} __attribute__ ((packed)) nsp32_sglun;
+#define NSP32_SG_TABLE_SIZE (sizeof(nsp32_sgtable) * NSP32_SG_SIZE * MAX_TARGET * MAX_LUN)
+
+/* Auto parameter mode memory map.   */
+/* All values must be little endian. */
+typedef struct _nsp32_autoparam {
+	u8     cdb[4 * 0x10];    /* SCSI Command                      */
+	u32_le msgout;           /* outgoing messages                 */
+	u8     syncreg;          /* sync register value               */
+	u8     ackwidth;         /* ack width register value          */
+	u8     target_id;        /* target/host device id             */
+	u8     sample_reg;       /* hazard killer sampling rate       */
+	u16_le command_control;  /* command control register          */
+	u16_le transfer_control; /* transfer control register         */
+	u32_le sgt_pointer;      /* SG table physical address for DMA */
+	u32_le dummy[2];
+} __attribute__ ((packed)) nsp32_autoparam;  /* must be packed struct */
+
+/*
+ * host data structure
+ */
+/* message in/out buffer */
+#define MSGOUTBUF_MAX		20
+#define MSGINBUF_MAX		20
+
+/* flag for trans_method */
+#define NSP32_TRANSFER_BUSMASTER	BIT(0)
+#define NSP32_TRANSFER_MMIO		BIT(1)	/* Not supported yet */
+#define NSP32_TRANSFER_PIO		BIT(2)	/* Not supported yet */
+
+
+/*
+ * structure for connected LUN dynamic data
+ *
+ * Note: Currently tagged queuing is disabled, each nsp32_lunt holds
+ *       one SCSI command and one state.
+ */
+#define DISCPRIV_OK		BIT(0)		/* DISCPRIV Enable mode */
+#define MSGIN03			BIT(1)		/* Auto Msg In 03 Flag  */
+
+typedef struct _nsp32_lunt {
+	struct scsi_cmnd	*SCpnt;	    /* Current Handling struct scsi_cmnd */
+	unsigned long	 save_datp;  /* Save Data Pointer - saved position from initial address */
+	int		 msgin03;	/* auto msg in 03 flag     */
+	unsigned int	 sg_num;	/* Total number of SG entries */
+	int		 cur_entry;	/* Current SG entry number */
+	nsp32_sglun     *sglun;		/* sg table per lun        */
+	dma_addr_t       sglun_paddr;   /* sglun physical address  */
+} nsp32_lunt;
+
+
+/*
+ * SCSI TARGET/LUN definition
+ */
+#define NSP32_HOST_SCSIID    7  /* SCSI initiator is everytime defined as 7 */
+#define MAX_TARGET	     8
+#define MAX_LUN		     8	/* XXX: In SPI3, max number of LUN is 64. */
+
+
+typedef struct _nsp32_sync_table {
+	unsigned char	period_num;	/* period number                  */
+	unsigned char	ackwidth;	/* ack width designated by period */
+	unsigned char	start_period;	/* search range - start period    */
+	unsigned char	end_period;	/* search range - end period      */
+	unsigned char   sample_rate;    /* hazard killer parameter        */
+} nsp32_sync_table;
+
+
+/*
+ * structure for target device static data
+ */
+/* flag for nsp32_target.sync_flag */
+#define SDTR_INITIATOR	  BIT(0)    /* sending SDTR from initiator        */
+#define SDTR_TARGET	  BIT(1)    /* sending SDTR from target           */
+#define SDTR_DONE	  BIT(2)    /* exchanging SDTR has been processed */
+
+/* syncronous period value for nsp32_target.config_max */
+#define FAST5M			0x32
+#define FAST10M			0x19
+#define ULTRA20M		0x0c
+
+/* flag for nsp32_target.{sync_offset}, period */
+#define ASYNC_OFFSET		0	/* asynchronous transfer           */
+#define SYNC_OFFSET		0xf	/* synchronous transfer max offset */
+
+/* syncreg:
+  bit:07 06 05 04 03 02 01 00
+      ---PERIOD-- ---OFFSET--   */
+#define TO_SYNCREG(period, offset) (((period) & 0x0f) << 4 | ((offset) & 0x0f))
+
+typedef struct _nsp32_target {
+	unsigned char	syncreg;	/* value for SYNCREG   */
+	unsigned char	ackwidth;	/* value for ACKWIDTH  */
+	unsigned char   period;         /* sync period (0-255) */
+	unsigned char	offset;		/* sync offset (0-15)  */
+	int		sync_flag;	/* SDTR_*, 0           */
+	int		limit_entry;	/* max speed limit entry designated
+					   by EEPROM configuration */
+	unsigned char   sample_reg;     /* SREQ hazard killer register */
+} nsp32_target;
+
+typedef struct _nsp32_hw_data {
+	int           IrqNumber;
+	int           BaseAddress;
+	int           NumAddress;
+	void __iomem *MmioAddress;
+#define NSP32_MMIO_OFFSET 0x0800
+	unsigned long MmioLength;
+
+	struct scsi_cmnd *CurrentSC;
+
+	struct pci_dev             *Pci;
+	const struct pci_device_id *pci_devid;
+	struct Scsi_Host           *Host;
+	spinlock_t                  Lock;
+
+	char info_str[100];
+
+	/* allocated memory region */
+	nsp32_sglun      *sg_list;	/* sglist virtuxal address         */
+	dma_addr_t	  sg_paddr;     /* physical address of hw_sg_table */
+	nsp32_autoparam  *autoparam;	/* auto parameter transfer region  */
+	dma_addr_t	  auto_paddr;	/* physical address of autoparam   */
+	int 		  cur_entry;	/* current sgt entry               */
+
+	/* target/LUN */
+	nsp32_lunt       *cur_lunt;	/* Current connected LUN table */
+	nsp32_lunt        lunt[MAX_TARGET][MAX_LUN];  /* All LUN table */
+
+	nsp32_target     *cur_target;	/* Current connected SCSI ID    */
+	nsp32_target	  target[MAX_TARGET];	     /* SCSI ID */
+	int		  cur_id;	/* Current connected target ID  */
+	int		  cur_lun;	/* Current connected target LUN */
+
+	/* behavior setting parameters */
+	int		  trans_method;	/* transfer method flag            */
+	int		  resettime;	/* Reset time                      */
+	int 		  clock;       	/* clock dividing flag             */
+	nsp32_sync_table *synct;	/* sync_table determined by clock  */
+	int		  syncnum;	/* the max number of synct element */
+
+	/* message buffer */
+	unsigned char msgoutbuf[MSGOUTBUF_MAX]; /* msgout buffer    */
+	char	      msgout_len;		/* msgoutbuf length */
+	unsigned char msginbuf [MSGINBUF_MAX];	/* megin buffer     */
+	char	      msgin_len;		/* msginbuf length  */
+
+} nsp32_hw_data;
+
+/*
+ * TIME definition
+ */
+#define RESET_HOLD_TIME		10000	/* reset time in us (SCSI-2 says the
+					   minimum is 25us) */
+#define SEL_TIMEOUT_TIME	10000	/* 250ms defined in SCSI specification
+					   (25.6us/1unit) */
+#define ARBIT_TIMEOUT_TIME	100	/* 100us */
+#define REQSACK_TIMEOUT_TIME	10000	/* max wait time for REQ/SACK assertion
+					   or negation, 10000us == 10ms */
+
+/**************************************************************************
+ * Compatibility functions
+ */
+
+/* for Kernel 2.4 */
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0))
+# define scsi_register_host(template) 	scsi_register_module(MODULE_SCSI_HA, template)
+# define scsi_unregister_host(template) scsi_unregister_module(MODULE_SCSI_HA, template)
+# define scsi_host_put(host)            scsi_unregister(host)
+# define pci_name(pci_dev)              ((pci_dev)->slot_name)
+
+typedef void irqreturn_t;
+# define IRQ_NONE      /* */
+# define IRQ_HANDLED   /* */
+# define IRQ_RETVAL(x) /* */
+
+/* This is ad-hoc version of scsi_host_get_next() */
+static inline struct Scsi_Host *scsi_host_get_next(struct Scsi_Host *host)
+{
+	if (host == NULL) {
+		return scsi_hostlist;
+	} else {
+		return host->next;
+	}
+}
+
+/* This is ad-hoc version of scsi_host_hn_get() */
+static inline struct Scsi_Host *scsi_host_hn_get(unsigned short hostno)
+{
+	struct Scsi_Host *host;
+
+	for (host = scsi_host_get_next(NULL); host != NULL;
+	     host = scsi_host_get_next(host)) {
+		if (host->host_no == hostno) {
+			break;
+		}
+	}
+
+	return host;
+}
+#endif
+
+#endif /* _NSP32_H */
+/* end */