summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/pm8001/pm8001_init.c
diff options
context:
space:
mode:
authorjack wang <jack_wang@usish.com>2009-10-14 16:19:21 +0800
committerJames Bottomley <James.Bottomley@suse.de>2009-12-04 12:00:40 -0600
commitdbf9bfe615717d1145f263c0049fe2328e6ed395 (patch)
treeae69b6f6cb4a15e15c59552f520c0f06209615ab /drivers/scsi/pm8001/pm8001_init.c
parent35e6601903fc41e48e9b6722a49cc5acc7065c51 (diff)
[SCSI] pm8001: add SAS/SATA HBA driver
This driver supports PMC-Sierra PCIe SAS/SATA 8x6G SPC 8001 chip based host adapters. Signed-off-by: Jack Wang <jack_wang@usish.com> Signed-off-by: Lindar Liu <lindar_liu@usish.com> Signed-off-by: Tom Peng <tom_peng@usish.com> Signed-off-by: Kevin Ao <aoqingyun@usish.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Diffstat (limited to 'drivers/scsi/pm8001/pm8001_init.c')
-rw-r--r--drivers/scsi/pm8001/pm8001_init.c888
1 files changed, 888 insertions, 0 deletions
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
new file mode 100644
index 00000000000..811b5d36d5f
--- /dev/null
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -0,0 +1,888 @@
+/*
+ * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#include "pm8001_sas.h"
+#include "pm8001_chips.h"
+
+static struct scsi_transport_template *pm8001_stt;
+
+static const struct pm8001_chip_info pm8001_chips[] = {
+ [chip_8001] = { 8, &pm8001_8001_dispatch,},
+};
+static int pm8001_id;
+
+LIST_HEAD(hba_list);
+
+/**
+ * The main structure which LLDD must register for scsi core.
+ */
+static struct scsi_host_template pm8001_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .queuecommand = sas_queuecommand,
+ .target_alloc = sas_target_alloc,
+ .slave_configure = pm8001_slave_configure,
+ .slave_destroy = sas_slave_destroy,
+ .scan_finished = pm8001_scan_finished,
+ .scan_start = pm8001_scan_start,
+ .change_queue_depth = sas_change_queue_depth,
+ .change_queue_type = sas_change_queue_type,
+ .bios_param = sas_bios_param,
+ .can_queue = 1,
+ .cmd_per_lun = 1,
+ .this_id = -1,
+ .sg_tablesize = SG_ALL,
+ .max_sectors = SCSI_DEFAULT_MAX_SECTORS,
+ .use_clustering = ENABLE_CLUSTERING,
+ .eh_device_reset_handler = sas_eh_device_reset_handler,
+ .eh_bus_reset_handler = sas_eh_bus_reset_handler,
+ .slave_alloc = pm8001_slave_alloc,
+ .target_destroy = sas_target_destroy,
+ .ioctl = sas_ioctl,
+ .shost_attrs = pm8001_host_attrs,
+};
+
+/**
+ * Sas layer call this function to execute specific task.
+ */
+static struct sas_domain_function_template pm8001_transport_ops = {
+ .lldd_dev_found = pm8001_dev_found,
+ .lldd_dev_gone = pm8001_dev_gone,
+
+ .lldd_execute_task = pm8001_queue_command,
+ .lldd_control_phy = pm8001_phy_control,
+
+ .lldd_abort_task = pm8001_abort_task,
+ .lldd_abort_task_set = pm8001_abort_task_set,
+ .lldd_clear_aca = pm8001_clear_aca,
+ .lldd_clear_task_set = pm8001_clear_task_set,
+ .lldd_I_T_nexus_reset = pm8001_I_T_nexus_reset,
+ .lldd_lu_reset = pm8001_lu_reset,
+ .lldd_query_task = pm8001_query_task,
+};
+
+/**
+ *pm8001_phy_init - initiate our adapter phys
+ *@pm8001_ha: our hba structure.
+ *@phy_id: phy id.
+ */
+static void __devinit pm8001_phy_init(struct pm8001_hba_info *pm8001_ha,
+ int phy_id)
+{
+ struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ phy->phy_state = 0;
+ phy->pm8001_ha = pm8001_ha;
+ sas_phy->enabled = (phy_id < pm8001_ha->chip->n_phy) ? 1 : 0;
+ sas_phy->class = SAS;
+ sas_phy->iproto = SAS_PROTOCOL_ALL;
+ sas_phy->tproto = 0;
+ sas_phy->type = PHY_TYPE_PHYSICAL;
+ sas_phy->role = PHY_ROLE_INITIATOR;
+ sas_phy->oob_mode = OOB_NOT_CONNECTED;
+ sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN;
+ sas_phy->id = phy_id;
+ sas_phy->sas_addr = &pm8001_ha->sas_addr[0];
+ sas_phy->frame_rcvd = &phy->frame_rcvd[0];
+ sas_phy->ha = (struct sas_ha_struct *)pm8001_ha->shost->hostdata;
+ sas_phy->lldd_phy = phy;
+}
+
+/**
+ *pm8001_free - free hba
+ *@pm8001_ha: our hba structure.
+ *
+ */
+static void pm8001_free(struct pm8001_hba_info *pm8001_ha)
+{
+ int i;
+ struct pm8001_wq *wq;
+
+ if (!pm8001_ha)
+ return;
+
+ for (i = 0; i < USI_MAX_MEMCNT; i++) {
+ if (pm8001_ha->memoryMap.region[i].virt_ptr != NULL) {
+ pci_free_consistent(pm8001_ha->pdev,
+ pm8001_ha->memoryMap.region[i].element_size,
+ pm8001_ha->memoryMap.region[i].virt_ptr,
+ pm8001_ha->memoryMap.region[i].phys_addr);
+ }
+ }
+ PM8001_CHIP_DISP->chip_iounmap(pm8001_ha);
+ if (pm8001_ha->shost)
+ scsi_host_put(pm8001_ha->shost);
+ list_for_each_entry(wq, &pm8001_ha->wq_list, entry)
+ cancel_delayed_work(&wq->work_q);
+ kfree(pm8001_ha->tags);
+ kfree(pm8001_ha);
+}
+
+#ifdef PM8001_USE_TASKLET
+static void pm8001_tasklet(unsigned long opaque)
+{
+ struct pm8001_hba_info *pm8001_ha;
+ pm8001_ha = (struct pm8001_hba_info *)opaque;;
+ if (unlikely(!pm8001_ha))
+ BUG_ON(1);
+ PM8001_CHIP_DISP->isr(pm8001_ha);
+}
+#endif
+
+
+ /**
+ * pm8001_interrupt - when HBA originate a interrupt,we should invoke this
+ * dispatcher to handle each case.
+ * @irq: irq number.
+ * @opaque: the passed general host adapter struct
+ */
+static irqreturn_t pm8001_interrupt(int irq, void *opaque)
+{
+ struct pm8001_hba_info *pm8001_ha;
+ irqreturn_t ret = IRQ_HANDLED;
+ struct sas_ha_struct *sha = opaque;
+ pm8001_ha = sha->lldd_ha;
+ if (unlikely(!pm8001_ha))
+ return IRQ_NONE;
+ if (!PM8001_CHIP_DISP->is_our_interupt(pm8001_ha))
+ return IRQ_NONE;
+#ifdef PM8001_USE_TASKLET
+ tasklet_schedule(&pm8001_ha->tasklet);
+#else
+ ret = PM8001_CHIP_DISP->isr(pm8001_ha);
+#endif
+ return ret;
+}
+
+/**
+ * pm8001_alloc - initiate our hba structure and 6 DMAs area.
+ * @pm8001_ha:our hba structure.
+ *
+ */
+static int __devinit pm8001_alloc(struct pm8001_hba_info *pm8001_ha)
+{
+ int i;
+ spin_lock_init(&pm8001_ha->lock);
+ for (i = 0; i < pm8001_ha->chip->n_phy; i++)
+ pm8001_phy_init(pm8001_ha, i);
+
+ pm8001_ha->tags = kmalloc(sizeof(*pm8001_ha->tags)*PM8001_MAX_DEVICES,
+ GFP_KERNEL);
+
+ /* MPI Memory region 1 for AAP Event Log for fw */
+ pm8001_ha->memoryMap.region[AAP1].num_elements = 1;
+ pm8001_ha->memoryMap.region[AAP1].element_size = PM8001_EVENT_LOG_SIZE;
+ pm8001_ha->memoryMap.region[AAP1].total_len = PM8001_EVENT_LOG_SIZE;
+ pm8001_ha->memoryMap.region[AAP1].alignment = 32;
+
+ /* MPI Memory region 2 for IOP Event Log for fw */
+ pm8001_ha->memoryMap.region[IOP].num_elements = 1;
+ pm8001_ha->memoryMap.region[IOP].element_size = PM8001_EVENT_LOG_SIZE;
+ pm8001_ha->memoryMap.region[IOP].total_len = PM8001_EVENT_LOG_SIZE;
+ pm8001_ha->memoryMap.region[IOP].alignment = 32;
+
+ /* MPI Memory region 3 for consumer Index of inbound queues */
+ pm8001_ha->memoryMap.region[CI].num_elements = 1;
+ pm8001_ha->memoryMap.region[CI].element_size = 4;
+ pm8001_ha->memoryMap.region[CI].total_len = 4;
+ pm8001_ha->memoryMap.region[CI].alignment = 4;
+
+ /* MPI Memory region 4 for producer Index of outbound queues */
+ pm8001_ha->memoryMap.region[PI].num_elements = 1;
+ pm8001_ha->memoryMap.region[PI].element_size = 4;
+ pm8001_ha->memoryMap.region[PI].total_len = 4;
+ pm8001_ha->memoryMap.region[PI].alignment = 4;
+
+ /* MPI Memory region 5 inbound queues */
+ pm8001_ha->memoryMap.region[IB].num_elements = 256;
+ pm8001_ha->memoryMap.region[IB].element_size = 64;
+ pm8001_ha->memoryMap.region[IB].total_len = 256 * 64;
+ pm8001_ha->memoryMap.region[IB].alignment = 64;
+
+ /* MPI Memory region 6 inbound queues */
+ pm8001_ha->memoryMap.region[OB].num_elements = 256;
+ pm8001_ha->memoryMap.region[OB].element_size = 64;
+ pm8001_ha->memoryMap.region[OB].total_len = 256 * 64;
+ pm8001_ha->memoryMap.region[OB].alignment = 64;
+
+ /* Memory region write DMA*/
+ pm8001_ha->memoryMap.region[NVMD].num_elements = 1;
+ pm8001_ha->memoryMap.region[NVMD].element_size = 4096;
+ pm8001_ha->memoryMap.region[NVMD].total_len = 4096;
+ /* Memory region for devices*/
+ pm8001_ha->memoryMap.region[DEV_MEM].num_elements = 1;
+ pm8001_ha->memoryMap.region[DEV_MEM].element_size = PM8001_MAX_DEVICES *
+ sizeof(struct pm8001_device);
+ pm8001_ha->memoryMap.region[DEV_MEM].total_len = PM8001_MAX_DEVICES *
+ sizeof(struct pm8001_device);
+
+ /* Memory region for ccb_info*/
+ pm8001_ha->memoryMap.region[CCB_MEM].num_elements = 1;
+ pm8001_ha->memoryMap.region[CCB_MEM].element_size = PM8001_MAX_CCB *
+ sizeof(struct pm8001_ccb_info);
+ pm8001_ha->memoryMap.region[CCB_MEM].total_len = PM8001_MAX_CCB *
+ sizeof(struct pm8001_ccb_info);
+
+ for (i = 0; i < USI_MAX_MEMCNT; i++) {
+ if (pm8001_mem_alloc(pm8001_ha->pdev,
+ &pm8001_ha->memoryMap.region[i].virt_ptr,
+ &pm8001_ha->memoryMap.region[i].phys_addr,
+ &pm8001_ha->memoryMap.region[i].phys_addr_hi,
+ &pm8001_ha->memoryMap.region[i].phys_addr_lo,
+ pm8001_ha->memoryMap.region[i].total_len,
+ pm8001_ha->memoryMap.region[i].alignment) != 0) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("Mem%d alloc failed\n",
+ i));
+ goto err_out;
+ }
+ }
+
+ pm8001_ha->devices = pm8001_ha->memoryMap.region[DEV_MEM].virt_ptr;
+ for (i = 0; i < PM8001_MAX_DEVICES; i++) {
+ pm8001_ha->devices[i].dev_type = NO_DEVICE;
+ pm8001_ha->devices[i].id = i;
+ pm8001_ha->devices[i].device_id = PM8001_MAX_DEVICES;
+ pm8001_ha->devices[i].running_req = 0;
+ }
+ pm8001_ha->ccb_info = pm8001_ha->memoryMap.region[CCB_MEM].virt_ptr;
+ for (i = 0; i < PM8001_MAX_CCB; i++) {
+ pm8001_ha->ccb_info[i].ccb_dma_handle =
+ pm8001_ha->memoryMap.region[CCB_MEM].phys_addr +
+ i * sizeof(struct pm8001_ccb_info);
+ ++pm8001_ha->tags_num;
+ }
+ pm8001_ha->flags = PM8001F_INIT_TIME;
+ /* Initialize tags */
+ pm8001_tag_init(pm8001_ha);
+ return 0;
+err_out:
+ return 1;
+}
+
+/**
+ * pm8001_ioremap - remap the pci high physical address to kernal virtual
+ * address so that we can access them.
+ * @pm8001_ha:our hba structure.
+ */
+static int pm8001_ioremap(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 bar;
+ u32 logicalBar = 0;
+ struct pci_dev *pdev;
+
+ pdev = pm8001_ha->pdev;
+ /* map pci mem (PMC pci base 0-3)*/
+ for (bar = 0; bar < 6; bar++) {
+ /*
+ ** logical BARs for SPC:
+ ** bar 0 and 1 - logical BAR0
+ ** bar 2 and 3 - logical BAR1
+ ** bar4 - logical BAR2
+ ** bar5 - logical BAR3
+ ** Skip the appropriate assignments:
+ */
+ if ((bar == 1) || (bar == 3))
+ continue;
+ if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) {
+ pm8001_ha->io_mem[logicalBar].membase =
+ pci_resource_start(pdev, bar);
+ pm8001_ha->io_mem[logicalBar].membase &=
+ (u32)PCI_BASE_ADDRESS_MEM_MASK;
+ pm8001_ha->io_mem[logicalBar].memsize =
+ pci_resource_len(pdev, bar);
+ pm8001_ha->io_mem[logicalBar].memvirtaddr =
+ ioremap(pm8001_ha->io_mem[logicalBar].membase,
+ pm8001_ha->io_mem[logicalBar].memsize);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("PCI: bar %d, logicalBar %d "
+ "virt_addr=%lx,len=%d\n", bar, logicalBar,
+ (unsigned long)
+ pm8001_ha->io_mem[logicalBar].memvirtaddr,
+ pm8001_ha->io_mem[logicalBar].memsize));
+ } else {
+ pm8001_ha->io_mem[logicalBar].membase = 0;
+ pm8001_ha->io_mem[logicalBar].memsize = 0;
+ pm8001_ha->io_mem[logicalBar].memvirtaddr = 0;
+ }
+ logicalBar++;
+ }
+ return 0;
+}
+
+/**
+ * pm8001_pci_alloc - initialize our ha card structure
+ * @pdev: pci device.
+ * @ent: ent
+ * @shost: scsi host struct which has been initialized before.
+ */
+static struct pm8001_hba_info *__devinit
+pm8001_pci_alloc(struct pci_dev *pdev, u32 chip_id, struct Scsi_Host *shost)
+{
+ struct pm8001_hba_info *pm8001_ha;
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+
+
+ pm8001_ha = sha->lldd_ha;
+ if (!pm8001_ha)
+ return NULL;
+
+ pm8001_ha->pdev = pdev;
+ pm8001_ha->dev = &pdev->dev;
+ pm8001_ha->chip_id = chip_id;
+ pm8001_ha->chip = &pm8001_chips[pm8001_ha->chip_id];
+ pm8001_ha->irq = pdev->irq;
+ pm8001_ha->sas = sha;
+ pm8001_ha->shost = shost;
+ pm8001_ha->id = pm8001_id++;
+ INIT_LIST_HEAD(&pm8001_ha->wq_list);
+ pm8001_ha->logging_level = 0x01;
+ sprintf(pm8001_ha->name, "%s%d", DRV_NAME, pm8001_ha->id);
+#ifdef PM8001_USE_TASKLET
+ tasklet_init(&pm8001_ha->tasklet, pm8001_tasklet,
+ (unsigned long)pm8001_ha);
+#endif
+ pm8001_ioremap(pm8001_ha);
+ if (!pm8001_alloc(pm8001_ha))
+ return pm8001_ha;
+ pm8001_free(pm8001_ha);
+ return NULL;
+}
+
+/**
+ * pci_go_44 - pm8001 specified, its DMA is 44 bit rather than 64 bit
+ * @pdev: pci device.
+ */
+static int pci_go_44(struct pci_dev *pdev)
+{
+ int rc;
+
+ if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(44))) {
+ rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(44));
+ if (rc) {
+ rc = pci_set_consistent_dma_mask(pdev,
+ DMA_BIT_MASK(32));
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "44-bit DMA enable failed\n");
+ return rc;
+ }
+ }
+ } else {
+ rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit DMA enable failed\n");
+ return rc;
+ }
+ rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit consistent DMA enable failed\n");
+ return rc;
+ }
+ }
+ return rc;
+}
+
+/**
+ * pm8001_prep_sas_ha_init - allocate memory in general hba struct && init them.
+ * @shost: scsi host which has been allocated outside.
+ * @chip_info: our ha struct.
+ */
+static int __devinit pm8001_prep_sas_ha_init(struct Scsi_Host * shost,
+ const struct pm8001_chip_info *chip_info)
+{
+ int phy_nr, port_nr;
+ struct asd_sas_phy **arr_phy;
+ struct asd_sas_port **arr_port;
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+
+ phy_nr = chip_info->n_phy;
+ port_nr = phy_nr;
+ memset(sha, 0x00, sizeof(*sha));
+ arr_phy = kcalloc(phy_nr, sizeof(void *), GFP_KERNEL);
+ if (!arr_phy)
+ goto exit;
+ arr_port = kcalloc(port_nr, sizeof(void *), GFP_KERNEL);
+ if (!arr_port)
+ goto exit_free2;
+
+ sha->sas_phy = arr_phy;
+ sha->sas_port = arr_port;
+ sha->lldd_ha = kzalloc(sizeof(struct pm8001_hba_info), GFP_KERNEL);
+ if (!sha->lldd_ha)
+ goto exit_free1;
+
+ shost->transportt = pm8001_stt;
+ shost->max_id = PM8001_MAX_DEVICES;
+ shost->max_lun = 8;
+ shost->max_channel = 0;
+ shost->unique_id = pm8001_id;
+ shost->max_cmd_len = 16;
+ shost->can_queue = PM8001_CAN_QUEUE;
+ shost->cmd_per_lun = 32;
+ return 0;
+exit_free1:
+ kfree(arr_port);
+exit_free2:
+ kfree(arr_phy);
+exit:
+ return -1;
+}
+
+/**
+ * pm8001_post_sas_ha_init - initialize general hba struct defined in libsas
+ * @shost: scsi host which has been allocated outside
+ * @chip_info: our ha struct.
+ */
+static void __devinit pm8001_post_sas_ha_init(struct Scsi_Host *shost,
+ const struct pm8001_chip_info *chip_info)
+{
+ int i = 0;
+ struct pm8001_hba_info *pm8001_ha;
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+
+ pm8001_ha = sha->lldd_ha;
+ for (i = 0; i < chip_info->n_phy; i++) {
+ sha->sas_phy[i] = &pm8001_ha->phy[i].sas_phy;
+ sha->sas_port[i] = &pm8001_ha->port[i].sas_port;
+ }
+ sha->sas_ha_name = DRV_NAME;
+ sha->dev = pm8001_ha->dev;
+
+ sha->lldd_module = THIS_MODULE;
+ sha->sas_addr = &pm8001_ha->sas_addr[0];
+ sha->num_phys = chip_info->n_phy;
+ sha->lldd_max_execute_num = 1;
+ sha->lldd_queue_size = PM8001_CAN_QUEUE;
+ sha->core.shost = shost;
+}
+
+/**
+ * pm8001_init_sas_add - initialize sas address
+ * @chip_info: our ha struct.
+ *
+ * Currently we just set the fixed SAS address to our HBA,for manufacture,
+ * it should read from the EEPROM
+ */
+static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
+{
+ u8 i;
+#ifdef PM8001_READ_VPD
+ DECLARE_COMPLETION_ONSTACK(completion);
+ pm8001_ha->nvmd_completion = &completion;
+ PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, 0, 0);
+ wait_for_completion(&completion);
+ for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
+ memcpy(&pm8001_ha->phy[i].dev_sas_addr, pm8001_ha->sas_addr,
+ SAS_ADDR_SIZE);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("phy %d sas_addr = %x \n", i,
+ (u64)pm8001_ha->phy[i].dev_sas_addr));
+ }
+#else
+ for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
+ pm8001_ha->phy[i].dev_sas_addr = 0x500e004010000004ULL;
+ pm8001_ha->phy[i].dev_sas_addr =
+ cpu_to_be64((u64)
+ (*(u64 *)&pm8001_ha->phy[i].dev_sas_addr));
+ }
+ memcpy(pm8001_ha->sas_addr, &pm8001_ha->phy[0].dev_sas_addr,
+ SAS_ADDR_SIZE);
+#endif
+}
+
+#ifdef PM8001_USE_MSIX
+/**
+ * pm8001_setup_msix - enable MSI-X interrupt
+ * @chip_info: our ha struct.
+ * @irq_handler: irq_handler
+ */
+static u32 pm8001_setup_msix(struct pm8001_hba_info *pm8001_ha,
+ irq_handler_t irq_handler)
+{
+ u32 i = 0, j = 0;
+ u32 number_of_intr = 1;
+ int flag = 0;
+ u32 max_entry;
+ int rc;
+ max_entry = sizeof(pm8001_ha->msix_entries) /
+ sizeof(pm8001_ha->msix_entries[0]);
+ flag |= IRQF_DISABLED;
+ for (i = 0; i < max_entry ; i++)
+ pm8001_ha->msix_entries[i].entry = i;
+ rc = pci_enable_msix(pm8001_ha->pdev, pm8001_ha->msix_entries,
+ number_of_intr);
+ pm8001_ha->number_of_intr = number_of_intr;
+ if (!rc) {
+ for (i = 0; i < number_of_intr; i++) {
+ if (request_irq(pm8001_ha->msix_entries[i].vector,
+ irq_handler, flag, DRV_NAME,
+ SHOST_TO_SAS_HA(pm8001_ha->shost))) {
+ for (j = 0; j < i; j++)
+ free_irq(
+ pm8001_ha->msix_entries[j].vector,
+ SHOST_TO_SAS_HA(pm8001_ha->shost));
+ pci_disable_msix(pm8001_ha->pdev);
+ break;
+ }
+ }
+ }
+ return rc;
+}
+#endif
+
+/**
+ * pm8001_request_irq - register interrupt
+ * @chip_info: our ha struct.
+ */
+static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha)
+{
+ struct pci_dev *pdev;
+ irq_handler_t irq_handler = pm8001_interrupt;
+ u32 rc;
+
+ pdev = pm8001_ha->pdev;
+
+#ifdef PM8001_USE_MSIX
+ if (pci_find_capability(pdev, PCI_CAP_ID_MSIX))
+ return pm8001_setup_msix(pm8001_ha, irq_handler);
+ else
+ goto intx;
+#endif
+
+intx:
+ /* intialize the INT-X interrupt */
+ rc = request_irq(pdev->irq, irq_handler, IRQF_SHARED, DRV_NAME,
+ SHOST_TO_SAS_HA(pm8001_ha->shost));
+ return rc;
+}
+
+/**
+ * pm8001_pci_probe - probe supported device
+ * @pdev: pci device which kernel has been prepared for.
+ * @ent: pci device id
+ *
+ * This function is the main initialization function, when register a new
+ * pci driver it is invoked, all struct an hardware initilization should be done
+ * here, also, register interrupt
+ */
+static int __devinit pm8001_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ unsigned int rc;
+ u32 pci_reg;
+ struct pm8001_hba_info *pm8001_ha;
+ struct Scsi_Host *shost = NULL;
+ const struct pm8001_chip_info *chip;
+
+ dev_printk(KERN_INFO, &pdev->dev,
+ "pm8001: driver version %s\n", DRV_VERSION);
+ rc = pci_enable_device(pdev);
+ if (rc)
+ goto err_out_enable;
+ pci_set_master(pdev);
+ /*
+ * Enable pci slot busmaster by setting pci command register.
+ * This is required by FW for Cyclone card.
+ */
+
+ pci_read_config_dword(pdev, PCI_COMMAND, &pci_reg);
+ pci_reg |= 0x157;
+ pci_write_config_dword(pdev, PCI_COMMAND, pci_reg);
+ rc = pci_request_regions(pdev, DRV_NAME);
+ if (rc)
+ goto err_out_disable;
+ rc = pci_go_44(pdev);
+ if (rc)
+ goto err_out_regions;
+
+ shost = scsi_host_alloc(&pm8001_sht, sizeof(void *));
+ if (!shost) {
+ rc = -ENOMEM;
+ goto err_out_regions;
+ }
+ chip = &pm8001_chips[ent->driver_data];
+ SHOST_TO_SAS_HA(shost) =
+ kcalloc(1, sizeof(struct sas_ha_struct), GFP_KERNEL);
+ if (!SHOST_TO_SAS_HA(shost)) {
+ rc = -ENOMEM;
+ goto err_out_free_host;
+ }
+
+ rc = pm8001_prep_sas_ha_init(shost, chip);
+ if (rc) {
+ rc = -ENOMEM;
+ goto err_out_free;
+ }
+ pci_set_drvdata(pdev, SHOST_TO_SAS_HA(shost));
+ pm8001_ha = pm8001_pci_alloc(pdev, chip_8001, shost);
+ if (!pm8001_ha) {
+ rc = -ENOMEM;
+ goto err_out_free;
+ }
+ list_add_tail(&pm8001_ha->list, &hba_list);
+ PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha, 0x252acbcd);
+ rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
+ if (rc)
+ goto err_out_ha_free;
+
+ rc = scsi_add_host(shost, &pdev->dev);
+ if (rc)
+ goto err_out_ha_free;
+ rc = pm8001_request_irq(pm8001_ha);
+ if (rc)
+ goto err_out_shost;
+
+ PM8001_CHIP_DISP->interrupt_enable(pm8001_ha);
+ pm8001_init_sas_add(pm8001_ha);
+ pm8001_post_sas_ha_init(shost, chip);
+ rc = sas_register_ha(SHOST_TO_SAS_HA(shost));
+ if (rc)
+ goto err_out_shost;
+ scsi_scan_host(pm8001_ha->shost);
+ return 0;
+
+err_out_shost:
+ scsi_remove_host(pm8001_ha->shost);
+err_out_ha_free:
+ pm8001_free(pm8001_ha);
+err_out_free:
+ kfree(SHOST_TO_SAS_HA(shost));
+err_out_free_host:
+ kfree(shost);
+err_out_regions:
+ pci_release_regions(pdev);
+err_out_disable:
+ pci_disable_device(pdev);
+err_out_enable:
+ return rc;
+}
+
+static void __devexit pm8001_pci_remove(struct pci_dev *pdev)
+{
+ struct sas_ha_struct *sha = pci_get_drvdata(pdev);
+ struct pm8001_hba_info *pm8001_ha;
+ int i;
+ pm8001_ha = sha->lldd_ha;
+ pci_set_drvdata(pdev, NULL);
+ sas_unregister_ha(sha);
+ sas_remove_host(pm8001_ha->shost);
+ list_del(&pm8001_ha->list);
+ scsi_remove_host(pm8001_ha->shost);
+ PM8001_CHIP_DISP->interrupt_disable(pm8001_ha);
+ PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha, 0x252acbcd);
+
+#ifdef PM8001_USE_MSIX
+ for (i = 0; i < pm8001_ha->number_of_intr; i++)
+ synchronize_irq(pm8001_ha->msix_entries[i].vector);
+ for (i = 0; i < pm8001_ha->number_of_intr; i++)
+ free_irq(pm8001_ha->msix_entries[i].vector, sha);
+ pci_disable_msix(pdev);
+#else
+ free_irq(pm8001_ha->irq, sha);
+#endif
+#ifdef PM8001_USE_TASKLET
+ tasklet_kill(&pm8001_ha->tasklet);
+#endif
+ pm8001_free(pm8001_ha);
+ kfree(sha->sas_phy);
+ kfree(sha->sas_port);
+ kfree(sha);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+}
+
+/**
+ * pm8001_pci_suspend - power management suspend main entry point
+ * @pdev: PCI device struct
+ * @state: PM state change to (usually PCI_D3)
+ *
+ * Returns 0 success, anything else error.
+ */
+static int pm8001_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct sas_ha_struct *sha = pci_get_drvdata(pdev);
+ struct pm8001_hba_info *pm8001_ha;
+ int i , pos;
+ u32 device_state;
+ pm8001_ha = sha->lldd_ha;
+ flush_scheduled_work();
+ scsi_block_requests(pm8001_ha->shost);
+ pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
+ if (pos == 0) {
+ printk(KERN_ERR " PCI PM not supported\n");
+ return -ENODEV;
+ }
+ PM8001_CHIP_DISP->interrupt_disable(pm8001_ha);
+ PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha, 0x252acbcd);
+#ifdef PM8001_USE_MSIX
+ for (i = 0; i < pm8001_ha->number_of_intr; i++)
+ synchronize_irq(pm8001_ha->msix_entries[i].vector);
+ for (i = 0; i < pm8001_ha->number_of_intr; i++)
+ free_irq(pm8001_ha->msix_entries[i].vector, sha);
+ pci_disable_msix(pdev);
+#else
+ free_irq(pm8001_ha->irq, sha);
+#endif
+#ifdef PM8001_USE_TASKLET
+ tasklet_kill(&pm8001_ha->tasklet);
+#endif
+ device_state = pci_choose_state(pdev, state);
+ pm8001_printk("pdev=0x%p, slot=%s, entering "
+ "operating state [D%d]\n", pdev,
+ pm8001_ha->name, device_state);
+ pci_save_state(pdev);
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, device_state);
+ return 0;
+}
+
+/**
+ * pm8001_pci_resume - power management resume main entry point
+ * @pdev: PCI device struct
+ *
+ * Returns 0 success, anything else error.
+ */
+static int pm8001_pci_resume(struct pci_dev *pdev)
+{
+ struct sas_ha_struct *sha = pci_get_drvdata(pdev);
+ struct pm8001_hba_info *pm8001_ha;
+ int rc;
+ u32 device_state;
+ pm8001_ha = sha->lldd_ha;
+ device_state = pdev->current_state;
+
+ pm8001_printk("pdev=0x%p, slot=%s, resuming from previous "
+ "operating state [D%d]\n", pdev, pm8001_ha->name, device_state);
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_enable_wake(pdev, PCI_D0, 0);
+ pci_restore_state(pdev);
+ rc = pci_enable_device(pdev);
+ if (rc) {
+ pm8001_printk("slot=%s Enable device failed during resume\n",
+ pm8001_ha->name);
+ goto err_out_enable;
+ }
+
+ pci_set_master(pdev);
+ rc = pci_go_44(pdev);
+ if (rc)
+ goto err_out_disable;
+
+ PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha, 0x252acbcd);
+ rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
+ if (rc)
+ goto err_out_disable;
+ PM8001_CHIP_DISP->interrupt_disable(pm8001_ha);
+ rc = pm8001_request_irq(pm8001_ha);
+ if (rc)
+ goto err_out_disable;
+ #ifdef PM8001_USE_TASKLET
+ tasklet_init(&pm8001_ha->tasklet, pm8001_tasklet,
+ (unsigned long)pm8001_ha);
+ #endif
+ PM8001_CHIP_DISP->interrupt_enable(pm8001_ha);
+ scsi_unblock_requests(pm8001_ha->shost);
+ return 0;
+
+err_out_disable:
+ scsi_remove_host(pm8001_ha->shost);
+ pci_disable_device(pdev);
+err_out_enable:
+ return rc;
+}
+
+static struct pci_device_id __devinitdata pm8001_pci_table[] = {
+ {
+ PCI_VDEVICE(PMC_Sierra, 0x8001), chip_8001
+ },
+ {
+ PCI_DEVICE(0x117c, 0x0042),
+ .driver_data = chip_8001
+ },
+ {} /* terminate list */
+};
+
+static struct pci_driver pm8001_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = pm8001_pci_table,
+ .probe = pm8001_pci_probe,
+ .remove = __devexit_p(pm8001_pci_remove),
+ .suspend = pm8001_pci_suspend,
+ .resume = pm8001_pci_resume,
+};
+
+/**
+ * pm8001_init - initialize scsi transport template
+ */
+static int __init pm8001_init(void)
+{
+ int rc;
+ pm8001_id = 0;
+ pm8001_stt = sas_domain_attach_transport(&pm8001_transport_ops);
+ if (!pm8001_stt)
+ return -ENOMEM;
+ rc = pci_register_driver(&pm8001_pci_driver);
+ if (rc)
+ goto err_out;
+ return 0;
+err_out:
+ sas_release_transport(pm8001_stt);
+ return rc;
+}
+
+static void __exit pm8001_exit(void)
+{
+ pci_unregister_driver(&pm8001_pci_driver);
+ sas_release_transport(pm8001_stt);
+}
+
+module_init(pm8001_init);
+module_exit(pm8001_exit);
+
+MODULE_AUTHOR("Jack Wang <jack_wang@usish.com>");
+MODULE_DESCRIPTION("PMC-Sierra PM8001 SAS/SATA controller driver");
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, pm8001_pci_table);
+