diff options
| author | Sakthivel K <Sakthivel.SaravananKamalRaju@pmcs.com> | 2013-04-17 16:37:02 +0530 |
|---|---|---|
| committer | James Bottomley <JBottomley@Parallels.com> | 2013-05-10 07:47:47 -0700 |
| commit | f5860992db55c9e36b0f120dff73f0c34abe510d (patch) | |
| tree | 16be1bcb6e60493ffcf77d13d9f50298e25adcc8 /drivers/scsi/pm8001/pm80xx_hwi.c | |
| parent | 1245ee5996a1270e4fd04f9c2e399521a656c930 (diff) | |
[SCSI] pm80xx: Added SPCv/ve specific hardware functionalities and relevant changes in common files
Implementation of SPCv/ve specific hardware functionality and
macros. Changing common functionalities wrt SPCv/ve operations.
Conditional checks for SPC specific operations.
Signed-off-by: Sakthivel K <Sakthivel.SaravananKamalRaju@pmcs.com>
Signed-off-by: Anand Kumar S <AnandKumar.Santhanam@pmcs.com>
Acked-by: Jack Wang <jack_wang@usish.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Diffstat (limited to 'drivers/scsi/pm8001/pm80xx_hwi.c')
| -rw-r--r-- | drivers/scsi/pm8001/pm80xx_hwi.c | 3772 |
1 files changed, 3772 insertions, 0 deletions
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c new file mode 100644 index 00000000000..7dee46716a5 --- /dev/null +++ b/drivers/scsi/pm8001/pm80xx_hwi.c @@ -0,0 +1,3772 @@ +/* + * PMC-Sierra SPCv/ve 8088/8089 SAS/SATA based host adapters driver + * + * Copyright (c) 2008-2009 PMC-Sierra, Inc., + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + * + */ + #include <linux/slab.h> + #include "pm8001_sas.h" + #include "pm80xx_hwi.h" + #include "pm8001_chips.h" + #include "pm8001_ctl.h" + +#define SMP_DIRECT 1 +#define SMP_INDIRECT 2 +/** + * read_main_config_table - read the configure table and save it. + * @pm8001_ha: our hba card information + */ +static void read_main_config_table(struct pm8001_hba_info *pm8001_ha) +{ + void __iomem *address = pm8001_ha->main_cfg_tbl_addr; + + pm8001_ha->main_cfg_tbl.pm80xx_tbl.signature = + pm8001_mr32(address, MAIN_SIGNATURE_OFFSET); + pm8001_ha->main_cfg_tbl.pm80xx_tbl.interface_rev = + pm8001_mr32(address, MAIN_INTERFACE_REVISION); + pm8001_ha->main_cfg_tbl.pm80xx_tbl.firmware_rev = + pm8001_mr32(address, MAIN_FW_REVISION); + pm8001_ha->main_cfg_tbl.pm80xx_tbl.max_out_io = + pm8001_mr32(address, MAIN_MAX_OUTSTANDING_IO_OFFSET); + pm8001_ha->main_cfg_tbl.pm80xx_tbl.max_sgl = + pm8001_mr32(address, MAIN_MAX_SGL_OFFSET); + pm8001_ha->main_cfg_tbl.pm80xx_tbl.ctrl_cap_flag = + pm8001_mr32(address, MAIN_CNTRL_CAP_OFFSET); + pm8001_ha->main_cfg_tbl.pm80xx_tbl.gst_offset = + pm8001_mr32(address, MAIN_GST_OFFSET); + pm8001_ha->main_cfg_tbl.pm80xx_tbl.inbound_queue_offset = + pm8001_mr32(address, MAIN_IBQ_OFFSET); + pm8001_ha->main_cfg_tbl.pm80xx_tbl.outbound_queue_offset = + pm8001_mr32(address, MAIN_OBQ_OFFSET); + + /* read Error Dump Offset and Length */ + pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_dump_offset0 = + pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP0_OFFSET); + pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_dump_length0 = + pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP0_LENGTH); + pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_dump_offset1 = + pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP1_OFFSET); + pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_dump_length1 = + pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP1_LENGTH); + + /* read GPIO LED settings from the configuration table */ + pm8001_ha->main_cfg_tbl.pm80xx_tbl.gpio_led_mapping = + pm8001_mr32(address, MAIN_GPIO_LED_FLAGS_OFFSET); + + /* read analog Setting offset from the configuration table */ + pm8001_ha->main_cfg_tbl.pm80xx_tbl.analog_setup_table_offset = + pm8001_mr32(address, MAIN_ANALOG_SETUP_OFFSET); + + pm8001_ha->main_cfg_tbl.pm80xx_tbl.int_vec_table_offset = + pm8001_mr32(address, MAIN_INT_VECTOR_TABLE_OFFSET); + pm8001_ha->main_cfg_tbl.pm80xx_tbl.phy_attr_table_offset = + pm8001_mr32(address, MAIN_SAS_PHY_ATTR_TABLE_OFFSET); +} + +/** + * read_general_status_table - read the general status table and save it. + * @pm8001_ha: our hba card information + */ +static void read_general_status_table(struct pm8001_hba_info *pm8001_ha) +{ + void __iomem *address = pm8001_ha->general_stat_tbl_addr; + pm8001_ha->gs_tbl.pm80xx_tbl.gst_len_mpistate = + pm8001_mr32(address, GST_GSTLEN_MPIS_OFFSET); + pm8001_ha->gs_tbl.pm80xx_tbl.iq_freeze_state0 = + pm8001_mr32(address, GST_IQ_FREEZE_STATE0_OFFSET); + pm8001_ha->gs_tbl.pm80xx_tbl.iq_freeze_state1 = + pm8001_mr32(address, GST_IQ_FREEZE_STATE1_OFFSET); + pm8001_ha->gs_tbl.pm80xx_tbl.msgu_tcnt = + pm8001_mr32(address, GST_MSGUTCNT_OFFSET); + pm8001_ha->gs_tbl.pm80xx_tbl.iop_tcnt = + pm8001_mr32(address, GST_IOPTCNT_OFFSET); + pm8001_ha->gs_tbl.pm80xx_tbl.gpio_input_val = + pm8001_mr32(address, GST_GPIO_INPUT_VAL); + pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[0] = + pm8001_mr32(address, GST_RERRINFO_OFFSET0); + pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[1] = + pm8001_mr32(address, GST_RERRINFO_OFFSET1); + pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[2] = + pm8001_mr32(address, GST_RERRINFO_OFFSET2); + pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[3] = + pm8001_mr32(address, GST_RERRINFO_OFFSET3); + pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[4] = + pm8001_mr32(address, GST_RERRINFO_OFFSET4); + pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[5] = + pm8001_mr32(address, GST_RERRINFO_OFFSET5); + pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[6] = + pm8001_mr32(address, GST_RERRINFO_OFFSET6); + pm8001_ha->gs_tbl.pm80xx_tbl.recover_err_info[7] = + pm8001_mr32(address, GST_RERRINFO_OFFSET7); +} +/** + * read_phy_attr_table - read the phy attribute table and save it. + * @pm8001_ha: our hba card information + */ +static void read_phy_attr_table(struct pm8001_hba_info *pm8001_ha) +{ + void __iomem *address = pm8001_ha->pspa_q_tbl_addr; + pm8001_ha->phy_attr_table.phystart1_16[0] = + pm8001_mr32(address, PSPA_PHYSTATE0_OFFSET); + pm8001_ha->phy_attr_table.phystart1_16[1] = + pm8001_mr32(address, PSPA_PHYSTATE1_OFFSET); + pm8001_ha->phy_attr_table.phystart1_16[2] = + pm8001_mr32(address, PSPA_PHYSTATE2_OFFSET); + pm8001_ha->phy_attr_table.phystart1_16[3] = + pm8001_mr32(address, PSPA_PHYSTATE3_OFFSET); + pm8001_ha->phy_attr_table.phystart1_16[4] = + pm8001_mr32(address, PSPA_PHYSTATE4_OFFSET); + pm8001_ha->phy_attr_table.phystart1_16[5] = + pm8001_mr32(address, PSPA_PHYSTATE5_OFFSET); + pm8001_ha->phy_attr_table.phystart1_16[6] = + pm8001_mr32(address, PSPA_PHYSTATE6_OFFSET); + pm8001_ha->phy_attr_table.phystart1_16[7] = + pm8001_mr32(address, PSPA_PHYSTATE7_OFFSET); + pm8001_ha->phy_attr_table.phystart1_16[8] = + pm8001_mr32(address, PSPA_PHYSTATE8_OFFSET); + pm8001_ha->phy_attr_table.phystart1_16[9] = + pm8001_mr32(address, PSPA_PHYSTATE9_OFFSET); + pm8001_ha->phy_attr_table.phystart1_16[10] = + pm8001_mr32(address, PSPA_PHYSTATE10_OFFSET); + pm8001_ha->phy_attr_table.phystart1_16[11] = + pm8001_mr32(address, PSPA_PHYSTATE11_OFFSET); + pm8001_ha->phy_attr_table.phystart1_16[12] = + pm8001_mr32(address, PSPA_PHYSTATE12_OFFSET); + pm8001_ha->phy_attr_table.phystart1_16[13] = + pm8001_mr32(address, PSPA_PHYSTATE13_OFFSET); + pm8001_ha->phy_attr_table.phystart1_16[14] = + pm8001_mr32(address, PSPA_PHYSTATE14_OFFSET); + pm8001_ha->phy_attr_table.phystart1_16[15] = + pm8001_mr32(address, PSPA_PHYSTATE15_OFFSET); + + pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[0] = + pm8001_mr32(address, PSPA_OB_HW_EVENT_PID0_OFFSET); + pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[1] = + pm8001_mr32(address, PSPA_OB_HW_EVENT_PID1_OFFSET); + pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[2] = + pm8001_mr32(address, PSPA_OB_HW_EVENT_PID2_OFFSET); + pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[3] = + pm8001_mr32(address, PSPA_OB_HW_EVENT_PID3_OFFSET); + pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[4] = + pm8001_mr32(address, PSPA_OB_HW_EVENT_PID4_OFFSET); + pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[5] = + pm8001_mr32(address, PSPA_OB_HW_EVENT_PID5_OFFSET); + pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[6] = + pm8001_mr32(address, PSPA_OB_HW_EVENT_PID6_OFFSET); + pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[7] = + pm8001_mr32(address, PSPA_OB_HW_EVENT_PID7_OFFSET); + pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[8] = + pm8001_mr32(address, PSPA_OB_HW_EVENT_PID8_OFFSET); + pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[9] = + pm8001_mr32(address, PSPA_OB_HW_EVENT_PID9_OFFSET); + pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[10] = + pm8001_mr32(address, PSPA_OB_HW_EVENT_PID10_OFFSET); + pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[11] = + pm8001_mr32(address, PSPA_OB_HW_EVENT_PID11_OFFSET); + pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[12] = + pm8001_mr32(address, PSPA_OB_HW_EVENT_PID12_OFFSET); + pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[13] = + pm8001_mr32(address, PSPA_OB_HW_EVENT_PID13_OFFSET); + pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[14] = + pm8001_mr32(address, PSPA_OB_HW_EVENT_PID14_OFFSET); + pm8001_ha->phy_attr_table.outbound_hw_event_pid1_16[15] = + pm8001_mr32(address, PSPA_OB_HW_EVENT_PID15_OFFSET); + +} + +/** + * read_inbnd_queue_table - read the inbound queue table and save it. + * @pm8001_ha: our hba card information + */ +static void read_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha) +{ + int i; + void __iomem *address = pm8001_ha->inbnd_q_tbl_addr; + for (i = 0; i < PM8001_MAX_SPCV_INB_NUM; i++) { + u32 offset = i * 0x20; + pm8001_ha->inbnd_q_tbl[i].pi_pci_bar = + get_pci_bar_index(pm8001_mr32(address, + (offset + IB_PIPCI_BAR))); + pm8001_ha->inbnd_q_tbl[i].pi_offset = + pm8001_mr32(address, (offset + IB_PIPCI_BAR_OFFSET)); + } +} + +/** + * read_outbnd_queue_table - read the outbound queue table and save it. + * @pm8001_ha: our hba card information + */ +static void read_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha) +{ + int i; + void __iomem *address = pm8001_ha->outbnd_q_tbl_addr; + for (i = 0; i < PM8001_MAX_SPCV_OUTB_NUM; i++) { + u32 offset = i * 0x24; + pm8001_ha->outbnd_q_tbl[i].ci_pci_bar = + get_pci_bar_index(pm8001_mr32(address, + (offset + OB_CIPCI_BAR))); + pm8001_ha->outbnd_q_tbl[i].ci_offset = + pm8001_mr32(address, (offset + OB_CIPCI_BAR_OFFSET)); + } +} + +/** + * init_default_table_values - init the default table. + * @pm8001_ha: our hba card information + */ +static void init_default_table_values(struct pm8001_hba_info *pm8001_ha) +{ + int i; + u32 offsetib, offsetob; + void __iomem *addressib = pm8001_ha->inbnd_q_tbl_addr; + void __iomem *addressob = pm8001_ha->outbnd_q_tbl_addr; + + pm8001_ha->main_cfg_tbl.pm80xx_tbl.upper_event_log_addr = + pm8001_ha->memoryMap.region[AAP1].phys_addr_hi; + pm8001_ha->main_cfg_tbl.pm80xx_tbl.lower_event_log_addr = + pm8001_ha->memoryMap.region[AAP1].phys_addr_lo; + pm8001_ha->main_cfg_tbl.pm80xx_tbl.event_log_size = + PM8001_EVENT_LOG_SIZE; + pm8001_ha->main_cfg_tbl.pm80xx_tbl.event_log_severity = 0x01; + pm8001_ha->main_cfg_tbl.pm80xx_tbl.upper_pcs_event_log_addr = + pm8001_ha->memoryMap.region[IOP].phys_addr_hi; + pm8001_ha->main_cfg_tbl.pm80xx_tbl.lower_pcs_event_log_addr = + pm8001_ha->memoryMap.region[IOP].phys_addr_lo; + pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_size = + PM8001_EVENT_LOG_SIZE; + pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_severity = 0x01; + pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_interrupt = 0x01; + + for (i = 0; i < PM8001_MAX_SPCV_INB_NUM; i++) { + pm8001_ha->inbnd_q_tbl[i].element_pri_size_cnt = + PM8001_MPI_QUEUE | (64 << 16) | (0x00<<30); + pm8001_ha->inbnd_q_tbl[i].upper_base_addr = + pm8001_ha->memoryMap.region[IB + i].phys_addr_hi; + pm8001_ha->inbnd_q_tbl[i].lower_base_addr = + pm8001_ha->memoryMap.region[IB + i].phys_addr_lo; + pm8001_ha->inbnd_q_tbl[i].base_virt = + (u8 *)pm8001_ha->memoryMap.region[IB + i].virt_ptr; + pm8001_ha->inbnd_q_tbl[i].total_length = + pm8001_ha->memoryMap.region[IB + i].total_len; + pm8001_ha->inbnd_q_tbl[i].ci_upper_base_addr = + pm8001_ha->memoryMap.region[CI + i].phys_addr_hi; + pm8001_ha->inbnd_q_tbl[i].ci_lower_base_addr = + pm8001_ha->memoryMap.region[CI + i].phys_addr_lo; + pm8001_ha->inbnd_q_tbl[i].ci_virt = + pm8001_ha->memoryMap.region[CI + i].virt_ptr; + offsetib = i * 0x20; + pm8001_ha->inbnd_q_tbl[i].pi_pci_bar = + get_pci_bar_index(pm8001_mr32(addressib, + (offsetib + 0x14))); + pm8001_ha->inbnd_q_tbl[i].pi_offset = + pm8001_mr32(addressib, (offsetib + 0x18)); + pm8001_ha->inbnd_q_tbl[i].producer_idx = 0; + pm8001_ha->inbnd_q_tbl[i].consumer_index = 0; + } + for (i = 0; i < PM8001_MAX_SPCV_OUTB_NUM; i++) { + pm8001_ha->outbnd_q_tbl[i].element_size_cnt = + PM8001_MPI_QUEUE | (64 << 16) | (0x01<<30); + pm8001_ha->outbnd_q_tbl[i].upper_base_addr = + pm8001_ha->memoryMap.region[OB + i].phys_addr_hi; + pm8001_ha->outbnd_q_tbl[i].lower_base_addr = + pm8001_ha->memoryMap.region[OB + i].phys_addr_lo; + pm8001_ha->outbnd_q_tbl[i].base_virt = + (u8 *)pm8001_ha->memoryMap.region[OB + i].virt_ptr; + pm8001_ha->outbnd_q_tbl[i].total_length = + pm8001_ha->memoryMap.region[OB + i].total_len; + pm8001_ha->outbnd_q_tbl[i].pi_upper_base_addr = + pm8001_ha->memoryMap.region[PI + i].phys_addr_hi; + pm8001_ha->outbnd_q_tbl[i].pi_lower_base_addr = + pm8001_ha->memoryMap.region[PI + i].phys_addr_lo; + /* interrupt vector based on oq */ + pm8001_ha->outbnd_q_tbl[i].interrup_vec_cnt_delay = (i << 24); + pm8001_ha->outbnd_q_tbl[i].pi_virt = + pm8001_ha->memoryMap.region[PI + i].virt_ptr; + offsetob = i * 0x24; + pm8001_ha->outbnd_q_tbl[i].ci_pci_bar = + get_pci_bar_index(pm8001_mr32(addressob, + offsetob + 0x14)); + pm8001_ha->outbnd_q_tbl[i].ci_offset = + pm8001_mr32(addressob, (offsetob + 0x18)); + pm8001_ha->outbnd_q_tbl[i].consumer_idx = 0; + pm8001_ha->outbnd_q_tbl[i].producer_index = 0; + } +} + +/** + * update_main_config_table - update the main default table to the HBA. + * @pm8001_ha: our hba card information + */ +static void update_main_config_table(struct pm8001_hba_info *pm8001_ha) +{ + void __iomem *address = pm8001_ha->main_cfg_tbl_addr; + pm8001_mw32(address, MAIN_IQNPPD_HPPD_OFFSET, + pm8001_ha->main_cfg_tbl.pm80xx_tbl.inbound_q_nppd_hppd); + pm8001_mw32(address, MAIN_EVENT_LOG_ADDR_HI, + pm8001_ha->main_cfg_tbl.pm80xx_tbl.upper_event_log_addr); + pm8001_mw32(address, MAIN_EVENT_LOG_ADDR_LO, + pm8001_ha->main_cfg_tbl.pm80xx_tbl.lower_event_log_addr); + pm8001_mw32(address, MAIN_EVENT_LOG_BUFF_SIZE, + pm8001_ha->main_cfg_tbl.pm80xx_tbl.event_log_size); + pm8001_mw32(address, MAIN_EVENT_LOG_OPTION, + pm8001_ha->main_cfg_tbl.pm80xx_tbl.event_log_severity); + pm8001_mw32(address, MAIN_PCS_EVENT_LOG_ADDR_HI, + pm8001_ha->main_cfg_tbl.pm80xx_tbl.upper_pcs_event_log_addr); + pm8001_mw32(address, MAIN_PCS_EVENT_LOG_ADDR_LO, + pm8001_ha->main_cfg_tbl.pm80xx_tbl.lower_pcs_event_log_addr); + pm8001_mw32(address, MAIN_PCS_EVENT_LOG_BUFF_SIZE, + pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_size); + pm8001_mw32(address, MAIN_PCS_EVENT_LOG_OPTION, + pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_severity); + pm8001_mw32(address, MAIN_FATAL_ERROR_INTERRUPT, + pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_interrupt); + + /* SPCv specific */ + pm8001_ha->main_cfg_tbl.pm80xx_tbl.gpio_led_mapping &= 0xCFFFFFFF; + /* Set GPIOLED to 0x2 for LED indicator */ + pm8001_ha->main_cfg_tbl.pm80xx_tbl.gpio_led_mapping |= 0x20000000; + pm8001_mw32(address, MAIN_GPIO_LED_FLAGS_OFFSET, + pm8001_ha->main_cfg_tbl.pm80xx_tbl.gpio_led_mapping); + + pm8001_mw32(address, MAIN_PORT_RECOVERY_TIMER, + pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer); + pm8001_mw32(address, MAIN_INT_REASSERTION_DELAY, + pm8001_ha->main_cfg_tbl.pm80xx_tbl.interrupt_reassertion_delay); +} + +/** + * update_inbnd_queue_table - update the inbound queue table to the HBA. + * @pm8001_ha: our hba card information + */ +static void update_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha, + int number) +{ + void __iomem *address = pm8001_ha->inbnd_q_tbl_addr; + u16 offset = number * 0x20; + pm8001_mw32(address, offset + IB_PROPERITY_OFFSET, + pm8001_ha->inbnd_q_tbl[number].element_pri_size_cnt); + pm8001_mw32(address, offset + IB_BASE_ADDR_HI_OFFSET, + pm8001_ha->inbnd_q_tbl[number].upper_base_addr); + pm8001_mw32(address, offset + IB_BASE_ADDR_LO_OFFSET, + pm8001_ha->inbnd_q_tbl[number].lower_base_addr); + pm8001_mw32(address, offset + IB_CI_BASE_ADDR_HI_OFFSET, + pm8001_ha->inbnd_q_tbl[number].ci_upper_base_addr); + pm8001_mw32(address, offset + IB_CI_BASE_ADDR_LO_OFFSET, + pm8001_ha->inbnd_q_tbl[number].ci_lower_base_addr); +} + +/** + * update_outbnd_queue_table - update the outbound queue table to the HBA. + * @pm8001_ha: our hba card information + */ +static void update_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha, + int number) +{ + void __iomem *address = pm8001_ha->outbnd_q_tbl_addr; + u16 offset = number * 0x24; + pm8001_mw32(address, offset + OB_PROPERITY_OFFSET, + pm8001_ha->outbnd_q_tbl[number].element_size_cnt); + pm8001_mw32(address, offset + OB_BASE_ADDR_HI_OFFSET, + pm8001_ha->outbnd_q_tbl[number].upper_base_addr); + pm8001_mw32(address, offset + OB_BASE_ADDR_LO_OFFSET, + pm8001_ha->outbnd_q_tbl[number].lower_base_addr); + pm8001_mw32(address, offset + OB_PI_BASE_ADDR_HI_OFFSET, + pm8001_ha->outbnd_q_tbl[number].pi_upper_base_addr); + pm8001_mw32(address, offset + OB_PI_BASE_ADDR_LO_OFFSET, + pm8001_ha->outbnd_q_tbl[number].pi_lower_base_addr); + pm8001_mw32(address, offset + OB_INTERRUPT_COALES_OFFSET, + pm8001_ha->outbnd_q_tbl[number].interrup_vec_cnt_delay); +} + +/** + * mpi_init_check - check firmware initialization status. + * @pm8001_ha: our hba card information + */ +static int mpi_init_check(struct pm8001_hba_info *pm8001_ha) +{ + u32 max_wait_count; + u32 value; + u32 gst_len_mpistate; + + /* Write bit0=1 to Inbound DoorBell Register to tell the SPC FW the + table is updated */ + pm8001_cw32(pm8001_ha, 0, MSGU_IBDB_SET, SPCv_MSGU_CFG_TABLE_UPDATE); + /* wait until Inbound DoorBell Clear Register toggled */ + max_wait_count = 2 * 1000 * 1000;/* 2 sec for spcv/ve */ + do { + udelay(1); + value = pm8001_cr32(pm8001_ha, 0, MSGU_IBDB_SET); + value &= SPCv_MSGU_CFG_TABLE_UPDATE; + } while ((value != 0) && (--max_wait_count)); + + if (!max_wait_count) + return -1; + /* check the MPI-State for initialization upto 100ms*/ + max_wait_count = 100 * 1000;/* 100 msec */ + do { + udelay(1); + gst_len_mpistate = + pm8001_mr32(pm8001_ha->general_stat_tbl_addr, + GST_GSTLEN_MPIS_OFFSET); + } while ((GST_MPI_STATE_INIT != + (gst_len_mpistate & GST_MPI_STATE_MASK)) && (--max_wait_count)); + if (!max_wait_count) + return -1; + + /* check MPI Initialization error */ + gst_len_mpistate = gst_len_mpistate >> 16; + if (0x0000 != gst_len_mpistate) + return -1; + + return 0; +} + +/** + * check_fw_ready - The LLDD check if the FW is ready, if not, return error. + * @pm8001_ha: our hba card information + */ +static int check_fw_ready(struct pm8001_hba_info *pm8001_ha) +{ + u32 value; + u32 max_wait_count; + u32 max_wait_time; + int ret = 0; + + /* reset / PCIe ready */ + max_wait_time = max_wait_count = 100 * 1000; /* 100 milli sec */ + do { + udelay(1); + value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1); + } while ((value == 0xFFFFFFFF) && (--max_wait_count)); + + /* check ila status */ + max_wait_time = max_wait_count = 1000 * 1000; /* 1000 milli sec */ + do { + udelay(1); + value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1); + } while (((value & SCRATCH_PAD_ILA_READY) != + SCRATCH_PAD_ILA_READY) && (--max_wait_count)); + if (!max_wait_count) + ret = -1; + else { + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk(" ila ready status in %d millisec\n", + (max_wait_time - max_wait_count))); + } + + /* check RAAE status */ + max_wait_time = max_wait_count = 1800 * 1000; /* 1800 milli sec */ + do { + udelay(1); + value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1); + } while (((value & SCRATCH_PAD_RAAE_READY) != + SCRATCH_PAD_RAAE_READY) && (--max_wait_count)); + if (!max_wait_count) + ret = -1; + else { + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk(" raae ready status in %d millisec\n", + (max_wait_time - max_wait_count))); + } + + /* check iop0 status */ + max_wait_time = max_wait_count = 600 * 1000; /* 600 milli sec */ + do { + udelay(1); + value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1); + } while (((value & SCRATCH_PAD_IOP0_READY) != SCRATCH_PAD_IOP0_READY) && + (--max_wait_count)); + if (!max_wait_count) + ret = -1; + else { + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk(" iop0 ready status in %d millisec\n", + (max_wait_time - max_wait_count))); + } + + /* check iop1 status only for 16 port controllers */ + if ((pm8001_ha->chip_id != chip_8008) && + (pm8001_ha->chip_id != chip_8009)) { + /* 200 milli sec */ + max_wait_time = max_wait_count = 200 * 1000; + do { + udelay(1); + value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1); + } while (((value & SCRATCH_PAD_IOP1_READY) != + SCRATCH_PAD_IOP1_READY) && (--max_wait_count)); + if (!max_wait_count) + ret = -1; + else { + PM8001_MSG_DBG(pm8001_ha, pm8001_printk( + "iop1 ready status in %d millisec\n", + (max_wait_time - max_wait_count))); + } + } + + return ret; +} + +static void init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha) +{ + void __iomem *base_addr; + u32 value; + u32 offset; + u32 pcibar; + u32 pcilogic; + + value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0); + offset = value & 0x03FFFFFF; /* scratch pad 0 TBL address */ + + PM8001_INIT_DBG(pm8001_ha, + pm8001_printk("Scratchpad 0 Offset: 0x%x value 0x%x\n", + offset, value)); + pcilogic = (value & 0xFC000000) >> 26; + pcibar = get_pci_bar_index(pcilogic); + PM8001_INIT_DBG(pm8001_ha, + pm8001_printk("Scratchpad 0 PCI BAR: %d\n", pcibar)); + pm8001_ha->main_cfg_tbl_addr = base_addr = + pm8001_ha->io_mem[pcibar].memvirtaddr + offset; + pm8001_ha->general_stat_tbl_addr = + base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0x18) & + 0xFFFFFF); + pm8001_ha->inbnd_q_tbl_addr = + base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0x1C) & + 0xFFFFFF); + pm8001_ha->outbnd_q_tbl_addr = + base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0x20) & + 0xFFFFFF); + pm8001_ha->ivt_tbl_addr = + base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0x8C) & + 0xFFFFFF); + pm8001_ha->pspa_q_tbl_addr = + base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0x90) & + 0xFFFFFF); + + PM8001_INIT_DBG(pm8001_ha, + pm8001_printk("GST OFFSET 0x%x\n", + pm8001_cr32(pm8001_ha, pcibar, offset + 0x18))); + PM8001_INIT_DBG(pm8001_ha, + pm8001_printk("INBND OFFSET 0x%x\n", + pm8001_cr32(pm8001_ha, pcibar, offset + 0x1C))); + PM8001_INIT_DBG(pm8001_ha, + pm8001_printk("OBND OFFSET 0x%x\n", + pm8001_cr32(pm8001_ha, pcibar, offset + 0x20))); + PM8001_INIT_DBG(pm8001_ha, + pm8001_printk("IVT OFFSET 0x%x\n", + pm8001_cr32(pm8001_ha, pcibar, offset + 0x8C))); + PM8001_INIT_DBG(pm8001_ha, + pm8001_printk("PSPA OFFSET 0x%x\n", + pm8001_cr32(pm8001_ha, pcibar, offset + 0x90))); + PM8001_INIT_DBG(pm8001_ha, + pm8001_printk("addr - main cfg %p general status %p\n", + pm8001_ha->main_cfg_tbl_addr, + pm8001_ha->general_stat_tbl_addr)); + PM8001_INIT_DBG(pm8001_ha, + pm8001_printk("addr - inbnd %p obnd %p\n", + pm8001_ha->inbnd_q_tbl_addr, + pm8001_ha->outbnd_q_tbl_addr)); + PM8001_INIT_DBG(pm8001_ha, + pm8001_printk("addr - pspa %p ivt %p\n", + pm8001_ha->pspa_q_tbl_addr, + pm8001_ha->ivt_tbl_addr)); +} + +/** + * pm80xx_set_thermal_config - support the thermal configuration + * @pm8001_ha: our hba card information. + */ +static int +pm80xx_set_thermal_config(struct pm8001_hba_info *pm8001_ha) +{ + struct set_ctrl_cfg_req payload; + struct inbound_queue_table *circularQ; + int rc; + u32 tag; + u32 opc = OPC_INB_SET_CONTROLLER_CONFIG; + + memset(&payload, 0, sizeof(struct set_ctrl_cfg_req)); + rc = pm8001_tag_alloc(pm8001_ha, &tag); + if (rc) + return -1; + + circularQ = &pm8001_ha->inbnd_q_tbl[0]; + payload.tag = cpu_to_le32(tag); + payload.cfg_pg[0] = (THERMAL_LOG_ENABLE << 9) | + (THERMAL_ENABLE << 8) | THERMAL_OP_CODE; + payload.cfg_pg[1] = (LTEMPHIL << 24) | (RTEMPHIL << 8); + + rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0); + return rc; + +} + +/** + * pm80xx_get_encrypt_info - Check for encryption + * @pm8001_ha: our hba card information. + */ +static int +pm80xx_get_encrypt_info(struct pm8001_hba_info *pm8001_ha) +{ + u32 scratch3_value; + int ret; + + /* Read encryption status from SCRATCH PAD 3 */ + scratch3_value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3); + + if ((scratch3_value & SCRATCH_PAD3_ENC_MASK) == + SCRATCH_PAD3_ENC_READY) { + if (scratch3_value & SCRATCH_PAD3_XTS_ENABLED) + pm8001_ha->encrypt_info.cipher_mode = CIPHER_MODE_XTS; + if ((scratch3_value & SCRATCH_PAD3_SM_MASK) == + SCRATCH_PAD3_SMF_ENABLED) + pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMF; + if ((scratch3_value & SCRATCH_PAD3_SM_MASK) == + SCRATCH_PAD3_SMA_ENABLED) + pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMA; + if ((scratch3_value & SCRATCH_PAD3_SM_MASK) == + SCRATCH_PAD3_SMB_ENABLED) + pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMB; + pm8001_ha->encrypt_info.status = 0; + PM8001_INIT_DBG(pm8001_ha, pm8001_printk( + "Encryption: SCRATCH_PAD3_ENC_READY 0x%08X." + "Cipher mode 0x%x Sec mode 0x%x status 0x%x\n", + scratch3_value, pm8001_ha->encrypt_info.cipher_mode, + pm8001_ha->encrypt_info.sec_mode, + pm8001_ha->encrypt_info.status)); + ret = 0; + } else if ((scratch3_value & SCRATCH_PAD3_ENC_READY) == + SCRATCH_PAD3_ENC_DISABLED) { + PM8001_INIT_DBG(pm8001_ha, pm8001_printk( + "Encryption: SCRATCH_PAD3_ENC_DISABLED 0x%08X\n", + scratch3_value)); + pm8001_ha->encrypt_info.status = 0xFFFFFFFF; + pm8001_ha->encrypt_info.cipher_mode = 0; + pm8001_ha->encrypt_info.sec_mode = 0; + return 0; + } else if ((scratch3_value & SCRATCH_PAD3_ENC_MASK) == + SCRATCH_PAD3_ENC_DIS_ERR) { + pm8001_ha->encrypt_info.status = + (scratch3_value & SCRATCH_PAD3_ERR_CODE) >> 16; + if (scratch3_value & SCRATCH_PAD3_XTS_ENABLED) + pm8001_ha->encrypt_info.cipher_mode = CIPHER_MODE_XTS; + if ((scratch3_value & SCRATCH_PAD3_SM_MASK) == + SCRATCH_PAD3_SMF_ENABLED) + pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMF; + if ((scratch3_value & SCRATCH_PAD3_SM_MASK) == + SCRATCH_PAD3_SMA_ENABLED) + pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMA; + if ((scratch3_value & SCRATCH_PAD3_SM_MASK) == + SCRATCH_PAD3_SMB_ENABLED) + pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMB; + PM8001_INIT_DBG(pm8001_ha, pm8001_printk( + "Encryption: SCRATCH_PAD3_DIS_ERR 0x%08X." + "Cipher mode 0x%x sec mode 0x%x status 0x%x\n", + scratch3_value, pm8001_ha->encrypt_info.cipher_mode, + pm8001_ha->encrypt_info.sec_mode, + pm8001_ha->encrypt_info.status)); + ret = -1; + } else if ((scratch3_value & SCRATCH_PAD3_ENC_MASK) == + SCRATCH_PAD3_ENC_ENA_ERR) { + + pm8001_ha->encrypt_info.status = + (scratch3_value & SCRATCH_PAD3_ERR_CODE) >> 16; + if (scratch3_value & SCRATCH_PAD3_XTS_ENABLED) + pm8001_ha->encrypt_info.cipher_mode = CIPHER_MODE_XTS; + if ((scratch3_value & SCRATCH_PAD3_SM_MASK) == + SCRATCH_PAD3_SMF_ENABLED) + pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMF; + if ((scratch3_value & SCRATCH_PAD3_SM_MASK) == + SCRATCH_PAD3_SMA_ENABLED) + pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMA; + if ((scratch3_value & SCRATCH_PAD3_SM_MASK) == + SCRATCH_PAD3_SMB_ENABLED) + pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMB; + + PM8001_INIT_DBG(pm8001_ha, pm8001_printk( + "Encryption: SCRATCH_PAD3_ENA_ERR 0x%08X." + "Cipher mode 0x%x sec mode 0x%x status 0x%x\n", + scratch3_value, pm8001_ha->encrypt_info.cipher_mode, + pm8001_ha->encrypt_info.sec_mode, + pm8001_ha->encrypt_info.status)); + ret = -1; + } + return ret; +} + +/** + * pm80xx_encrypt_update - update flash with encryption informtion + * @pm8001_ha: our hba card information. + */ +static int pm80xx_encrypt_update(struct pm8001_hba_info *pm8001_ha) +{ + struct kek_mgmt_req payload; + struct inbound_queue_table *circularQ; + int rc; + u32 tag; + u32 opc = OPC_INB_KEK_MANAGEMENT; + + memset(&payload, 0, sizeof(struct kek_mgmt_req)); + rc = pm8001_tag_alloc(pm8001_ha, &tag); + if (rc) + return -1; + + circularQ = &pm8001_ha->inbnd_q_tbl[0]; + payload.tag = cpu_to_le32(tag); + /* Currently only one key is used. New KEK index is 1. + * Current KEK index is 1. Store KEK to NVRAM is 1. + */ + payload.new_curidx_ksop = ((1 << 24) | (1 << 16) | (1 << 8) | + KEK_MGMT_SUBOP_KEYCARDUPDATE); + + rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0); + + return rc; +} + +/** + * pm8001_chip_init - the main init function that initialize whole PM8001 chip. + * @pm8001_ha: our hba card information + */ +static int pm80xx_chip_init(struct pm8001_hba_info *pm8001_ha) +{ + int ret; + u8 i = 0; + + /* check the firmware status */ + if (-1 == check_fw_ready(pm8001_ha)) { + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("Firmware is not ready!\n")); + return -EBUSY; + } + + /* Initialize pci space address eg: mpi offset */ + init_pci_device_addresses(pm8001_ha); + init_default_table_values(pm8001_ha); + read_main_config_table(pm8001_ha); + read_general_status_table(pm8001_ha); + read_inbnd_queue_table(pm8001_ha); + read_outbnd_queue_table(pm8001_ha); + read_phy_attr_table(pm8001_ha); + + /* update main config table ,inbound table and outbound table */ + update_main_config_table(pm8001_ha); + for (i = 0; i < PM8001_MAX_SPCV_INB_NUM; i++) + update_inbnd_queue_table(pm8001_ha, i); + for (i = 0; i < PM8001_MAX_SPCV_OUTB_NUM; i++) + update_outbnd_queue_table(pm8001_ha, i); + + /* notify firmware update finished and check initialization status */ + if (0 == mpi_init_check(pm8001_ha)) { + PM8001_INIT_DBG(pm8001_ha, + pm8001_printk("MPI initialize successful!\n")); + } else + return -EBUSY; + + /* configure thermal */ + pm80xx_set_thermal_config(pm8001_ha); + + PM8001_INIT_DBG(pm8001_ha, + pm8001_printk("Thermal configuration successful!\n")); + + /* Check for encryption */ + if (pm8001_ha->chip->encrypt) { + PM8001_INIT_DBG(pm8001_ha, + pm8001_printk("Checking for encryption\n")); + ret = pm80xx_get_encrypt_info(pm8001_ha); + if (ret == -1) { + PM8001_INIT_DBG(pm8001_ha, + pm8001_printk("Encryption error !!\n")); + if (pm8001_ha->encrypt_info.status == 0x81) { + PM8001_INIT_DBG(pm8001_ha, pm8001_printk( + "Encryption enabled with error." + "Saving encryption key to flash\n")); + pm80xx_encrypt_update(pm8001_ha); + } + } + } + return 0; +} + +static int mpi_uninit_check(struct pm8001_hba_info *pm8001_ha) +{ + u32 max_wait_count; + u32 value; + u32 gst_len_mpistate; + init_pci_device_addresses(pm8001_ha); + /* Write bit1=1 to Inbound DoorBell Register to tell the SPC FW the + table is stop */ + pm8001_cw32(pm8001_ha, 0, MSGU_IBDB_SET, SPCv_MSGU_CFG_TABLE_RESET); + + /* wait until Inbound DoorBell Clear Register toggled */ + max_wait_count = 2 * 1000 * 1000; /* 2 sec for spcv/ve */ + do { + udelay(1); + value = pm8001_cr32(pm8001_ha, 0, MSGU_IBDB_SET); + value &= SPCv_MSGU_CFG_TABLE_RESET; + } while ((value != 0) && (--max_wait_count)); + + if (!max_wait_count) { + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("TIMEOUT:IBDB value/=%x\n", value)); + return -1; + } + + /* check the MPI-State for termination in progress */ + /* wait until Inbound DoorBell Clear Register toggled */ + max_wait_count = 2 * 1000 * 1000; /* 2 sec for spcv/ve */ + do { + udelay(1); + gst_len_mpistate = + pm8001_mr32(pm8001_ha->general_stat_tbl_addr, + GST_GSTLEN_MPIS_OFFSET); + if (GST_MPI_STATE_UNINIT == + (gst_len_mpistate & GST_MPI_STATE_MASK)) + break; + } while (--max_wait_count); + if (!max_wait_count) { + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk(" TIME OUT MPI State = 0x%x\n", + gst_len_mpistate & GST_MPI_STATE_MASK)); + return -1; + } + + return 0; +} + +/** + * pm8001_chip_soft_rst - soft reset the PM8001 chip, so that the clear all + * the FW register status to the originated status. + * @pm8001_ha: our hba card information + */ + +static int +pm80xx_chip_soft_rst(struct pm8001_hba_info *pm8001_ha) +{ + u32 regval; + u32 bootloader_state; + + /* Check if MPI is in ready state to reset */ + if (mpi_uninit_check(pm8001_ha) != 0) { + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("MPI state is not ready\n")); + return -1; + } + + /* checked for reset register normal state; 0x0 */ + regval = pm8001_cr32(pm8001_ha, 0, SPC_REG_SOFT_RESET); + PM8001_INIT_DBG(pm8001_ha, + pm8001_printk("reset register before write : 0x%x\n", regval)); + + pm8001_cw32(pm8001_ha, 0, SPC_REG_SOFT_RESET, SPCv_NORMAL_RESET_VALUE); + mdelay(500); + + regval = pm8001_cr32(pm8001_ha, 0, SPC_REG_SOFT_RESET); + PM8001_INIT_DBG(pm8001_ha, + pm8001_printk("reset register after write 0x%x\n", regval)); + + if ((regval & SPCv_SOFT_RESET_READ_MASK) == + SPCv_SOFT_RESET_NORMAL_RESET_OCCURED) { + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk(" soft reset successful [regval: 0x%x]\n", + regval)); + } else { + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk(" soft reset failed [regval: 0x%x]\n", + regval)); + + /* check bootloader is successfully executed or in HDA mode */ + bootloader_state = + pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1) & + SCRATCH_PAD1_BOOTSTATE_MASK; + + if (bootloader_state == SCRATCH_PAD1_BOOTSTATE_HDA_SEEPROM) { + PM8001_MSG_DBG(pm8001_ha, pm8001_printk( + "Bootloader state - HDA mode SEEPROM\n")); + } else if (bootloader_state == + SCRATCH_PAD1_BOOTSTATE_HDA_BOOTSTRAP) { + PM8001_MSG_DBG(pm8001_ha, pm8001_printk( + "Bootloader state - HDA mode Bootstrap Pin\n")); + } else if (bootloader_state == + SCRATCH_PAD1_BOOTSTATE_HDA_SOFTRESET) { + PM8001_MSG_DBG(pm8001_ha, pm8001_printk( + "Bootloader state - HDA mode soft reset\n")); + } else if (bootloader_state == + SCRATCH_PAD1_BOOTSTATE_CRIT_ERROR) { + PM8001_MSG_DBG(pm8001_ha, pm8001_printk( + "Bootloader state-HDA mode critical error\n")); + } + return -EBUSY; + } + + /* check the firmware status after reset */ + if (-1 == check_fw_ready(pm8001_ha)) { + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("Firmware is not ready!\n")); + return -EBUSY; + } + PM8001_INIT_DBG(pm8001_ha, + pm8001_printk("SPCv soft reset Complete\n")); + return 0; +} + +static void pm80xx_hw_chip_rst(struct pm8001_hba_info *pm8001_ha) +{ + u32 i; + + PM8001_INIT_DBG(pm8001_ha, + pm8001_printk("chip reset start\n")); + + /* do SPCv chip reset. */ + pm8001_cw32(pm8001_ha, 0, SPC_REG_SOFT_RESET, 0x11); + PM8001_INIT_DBG(pm8001_ha, + pm8001_printk("SPC soft reset Complete\n")); + + /* Check this ..whether delay is required or no */ + /* delay 10 usec */ + udelay(10); + + /* wait for 20 msec until the firmware gets reloaded */ + i = 20; + do { + mdelay(1); + } while ((--i) != 0); + + PM8001_INIT_DBG(pm8001_ha, + pm8001_printk("chip reset finished\n")); +} + +/** + * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt + * @pm8001_ha: our hba card information + */ +static void +pm80xx_chip_intx_interrupt_enable(struct pm8001_hba_info *pm8001_ha) +{ + pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_CLEAR_ALL); + pm8001_cw32(pm8001_ha, 0, MSGU_ODCR, ODCR_CLEAR_ALL); +} + +/** + * pm8001_chip_intx_interrupt_disable- disable PM8001 chip interrupt + * @pm8001_ha: our hba card information + */ +static void +pm80xx_chip_intx_interrupt_disable(struct pm8001_hba_info *pm8001_ha) +{ + pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_CLR, ODMR_MASK_ALL); +} + +/** + * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt + * @pm8001_ha: our hba card information + */ +static void +pm80xx_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha, u8 vec) +{ +#ifdef PM8001_USE_MSIX + u32 mask; + mask = (u32)(1 << vec); + + pm8001_cw32(pm8001_ha, 0, MSGU_ODMR_CLR, (u32)(mask & 0xFFFFFFFF)); + return; +#endif + pm80xx_chip_intx_interrupt_enable(pm8001_ha); + +} + +/** + * pm8001_chip_interrupt_disable- disable PM8001 chip interrupt + * @pm8001_ha: our hba card information + */ +static void +pm80xx_chip_interrupt_disable(struct pm8001_hba_info *pm8001_ha, u8 vec) +{ +#ifdef PM8001_USE_MSIX + u32 mask; + if (vec == 0xFF) + mask = 0xFFFFFFFF; + else + mask = (u32)(1 << vec); + pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, (u32)(mask & 0xFFFFFFFF)); + return; +#endif + pm80xx_chip_intx_interrupt_disable(pm8001_ha); +} + +/** + * mpi_ssp_completion- process the event that FW response to the SSP request. + * @pm8001_ha: our hba card information + * @piomb: the message contents of this outbound message. + * + * When FW has completed a ssp request for example a IO request, after it has + * filled the SG data with the data, it will trigger this event represent + * that he has finished the job,please check the coresponding buffer. + * So we will tell the caller who maybe waiting the result to tell upper layer + * that the task has been finished. + */ +static void +mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb) +{ + struct sas_task *t; + struct pm8001_ccb_info *ccb; + unsigned long flags; + u32 status; + u32 param; + u32 tag; + struct ssp_completion_resp *psspPayload; + struct task_status_struct *ts; + struct ssp_response_iu *iu; + struct pm8001_device *pm8001_dev; + psspPayload = (struct ssp_completion_resp *)(piomb + 4); + status = le32_to_cpu(psspPayload->status); + tag = le32_to_cpu(psspPayload->tag); + ccb = &pm8001_ha->ccb_info[tag]; + if ((status == IO_ABORTED) && ccb->open_retry) { + /* Being completed by another */ + ccb->open_retry = 0; + return; + } + pm8001_dev = ccb->device; + param = le32_to_cpu(psspPayload->param); + t = ccb->task; + + if (status && status != IO_UNDERFLOW) + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("sas IO status 0x%x\n", status)); + if (unlikely(!t || !t->lldd_task || !t->dev)) + return; + ts = &t->task_status; + switch (status) { + case IO_SUCCESS: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_SUCCESS ,param = 0x%x\n", + param)); + if (param == 0) { + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAM_STAT_GOOD; + } else { + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_PROTO_RESPONSE; + ts->residual = param; + iu = &psspPayload->ssp_resp_iu; + sas_ssp_task_response(pm8001_ha->dev, t, iu); + } + if (pm8001_dev) + pm8001_dev->running_req--; + break; + case IO_ABORTED: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_ABORTED IOMB Tag\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_ABORTED_TASK; + break; + case IO_UNDERFLOW: + /* SSP Completion with error */ + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_UNDERFLOW ,param = 0x%x\n", + param)); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_DATA_UNDERRUN; + ts->residual = param; + if (pm8001_dev) + pm8001_dev->running_req--; + break; + case IO_NO_DEVICE: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_NO_DEVICE\n")); + ts->resp = SAS_TASK_UNDELIVERED; + ts->stat = SAS_PHY_DOWN; + break; + case IO_XFER_ERROR_BREAK: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_BREAK\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + /* Force the midlayer to retry */ + ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; + break; + case IO_XFER_ERROR_PHY_NOT_READY: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; + break; + case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_EPROTO; + break; + case IO_OPEN_CNX_ERROR_ZONE_VIOLATION: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_UNKNOWN; + break; + case IO_OPEN_CNX_ERROR_BREAK: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; + break; + case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_UNKNOWN; + if (!t->uldd_task) + pm8001_handle_event(pm8001_ha, + pm8001_dev, + IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS); + break; + case IO_OPEN_CNX_ERROR_BAD_DESTINATION: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_BAD_DEST; + break; + case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED: + PM8001_IO_DBG(pm8001_ha, pm8001_printk( + "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_CONN_RATE; + break; + case IO_OPEN_CNX_ERROR_WRONG_DESTINATION: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n")); + ts->resp = SAS_TASK_UNDELIVERED; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_WRONG_DEST; + break; + case IO_XFER_ERROR_NAK_RECEIVED: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; + break; + case IO_XFER_ERROR_ACK_NAK_TIMEOUT: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_NAK_R_ERR; + break; + case IO_XFER_ERROR_DMA: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_DMA\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + break; + case IO_XFER_OPEN_RETRY_TIMEOUT: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; + break; + case IO_XFER_ERROR_OFFSET_MISMATCH: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + break; + case IO_PORT_IN_RESET: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_PORT_IN_RESET\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + break; + case IO_DS_NON_OPERATIONAL: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_DS_NON_OPERATIONAL\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + if (!t->uldd_task) + pm8001_handle_event(pm8001_ha, + pm8001_dev, + IO_DS_NON_OPERATIONAL); + break; + case IO_DS_IN_RECOVERY: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_DS_IN_RECOVERY\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + break; + case IO_TM_TAG_NOT_FOUND: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_TM_TAG_NOT_FOUND\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + break; + case IO_SSP_EXT_IU_ZERO_LEN_ERROR: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_SSP_EXT_IU_ZERO_LEN_ERROR\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + break; + case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; + break; + default: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("Unknown status 0x%x\n", status)); + /* not allowed case. Therefore, return failed status */ + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + break; + } + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("scsi_status = 0x%x\n ", + psspPayload->ssp_resp_iu.status)); + spin_lock_irqsave(&t->task_state_lock, flags); + t->task_state_flags &= ~SAS_TASK_STATE_PENDING; + t->task_state_flags &= ~SAS_TASK_AT_INITIATOR; + t->task_state_flags |= SAS_TASK_STATE_DONE; + if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) { + spin_unlock_irqrestore(&t->task_state_lock, flags); + PM8001_FAIL_DBG(pm8001_ha, pm8001_printk( + "task 0x%p done with io_status 0x%x resp 0x%x " + "stat 0x%x but aborted by upper layer!\n", + t, status, ts->resp, ts->stat)); + pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); + } else { + spin_unlock_irqrestore(&t->task_state_lock, flags); + pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); + mb();/* in order to force CPU ordering */ + t->task_done(t); + } +} + +/*See the comments for mpi_ssp_completion */ +static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha , void *piomb) +{ + struct sas_task *t; + unsigned long flags; + struct task_status_struct *ts; + struct pm8001_ccb_info *ccb; + struct pm8001_device *pm8001_dev; + struct ssp_event_resp *psspPayload = + (struct ssp_event_resp *)(piomb + 4); + u32 event = le32_to_cpu(psspPayload->event); + u32 tag = le32_to_cpu(psspPayload->tag); + u32 port_id = le32_to_cpu(psspPayload->port_id); + + ccb = &pm8001_ha->ccb_info[tag]; + t = ccb->task; + pm8001_dev = ccb->device; + if (event) + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("sas IO status 0x%x\n", event)); + if (unlikely(!t || !t->lldd_task || !t->dev)) + return; + ts = &t->task_status; + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("port_id:0x%x, tag:0x%x, event:0x%x\n", + port_id, tag, event)); + switch (event) { + case IO_OVERFLOW: + PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n");) + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_DATA_OVERRUN; + ts->residual = 0; + if (pm8001_dev) + pm8001_dev->running_req--; + break; + case IO_XFER_ERROR_BREAK: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_BREAK\n")); + pm8001_handle_event(pm8001_ha, t, IO_XFER_ERROR_BREAK); + return; + case IO_XFER_ERROR_PHY_NOT_READY: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; + break; + case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED: + PM8001_IO_DBG(pm8001_ha, pm8001_printk( + "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_EPROTO; + break; + case IO_OPEN_CNX_ERROR_ZONE_VIOLATION: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_UNKNOWN; + break; + case IO_OPEN_CNX_ERROR_BREAK: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; + break; + case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_UNKNOWN; + if (!t->uldd_task) + pm8001_handle_event(pm8001_ha, + pm8001_dev, + IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS); + break; + case IO_OPEN_CNX_ERROR_BAD_DESTINATION: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_BAD_DEST; + break; + case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED: + PM8001_IO_DBG(pm8001_ha, pm8001_printk( + "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_CONN_RATE; + break; + case IO_OPEN_CNX_ERROR_WRONG_DESTINATION: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_WRONG_DEST; + break; + case IO_XFER_ERROR_NAK_RECEIVED: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; + break; + case IO_XFER_ERROR_ACK_NAK_TIMEOUT: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_NAK_R_ERR; + break; + case IO_XFER_OPEN_RETRY_TIMEOUT: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n")); + pm8001_handle_event(pm8001_ha, t, IO_XFER_OPEN_RETRY_TIMEOUT); + return; + case IO_XFER_ERROR_UNEXPECTED_PHASE: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_UNEXPECTED_PHASE\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_DATA_OVERRUN; + break; + case IO_XFER_ERROR_XFER_RDY_OVERRUN: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_XFER_RDY_OVERRUN\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_DATA_OVERRUN; + break; + case IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_DATA_OVERRUN; + break; + case IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_DATA_OVERRUN; + break; + case IO_XFER_ERROR_OFFSET_MISMATCH: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_DATA_OVERRUN; + break; + case IO_XFER_ERROR_XFER_ZERO_DATA_LEN: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_DATA_OVERRUN; + break; + case IO_XFER_CMD_FRAME_ISSUED: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_CMD_FRAME_ISSUED\n")); + return; + default: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("Unknown status 0x%x\n", event)); + /* not allowed case. Therefore, return failed status */ + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_DATA_OVERRUN; + break; + } + spin_lock_irqsave(&t->task_state_lock, flags); + t->task_state_flags &= ~SAS_TASK_STATE_PENDING; + t->task_state_flags &= ~SAS_TASK_AT_INITIATOR; + t->task_state_flags |= SAS_TASK_STATE_DONE; + if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) { + spin_unlock_irqrestore(&t->task_state_lock, flags); + PM8001_FAIL_DBG(pm8001_ha, pm8001_printk( + "task 0x%p done with event 0x%x resp 0x%x " + "stat 0x%x but aborted by upper layer!\n", + t, event, ts->resp, ts->stat)); + pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); + } else { + spin_unlock_irqrestore(&t->task_state_lock, flags); + pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); + mb();/* in order to force CPU ordering */ + t->task_done(t); + } +} + +/*See the comments for mpi_ssp_completion */ +static void +mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) +{ + struct sas_task *t; + struct pm8001_ccb_info *ccb; + u32 param; + u32 status; + u32 tag; + struct sata_completion_resp *psataPayload; + struct task_status_struct *ts; + struct ata_task_resp *resp ; + u32 *sata_resp; + struct pm8001_device *pm8001_dev; + unsigned long flags = 0; + + psataPayload = (struct sata_completion_resp *)(piomb + 4); + status = le32_to_cpu(psataPayload->status); + tag = le32_to_cpu(psataPayload->tag); + + ccb = &pm8001_ha->ccb_info[tag]; + param = le32_to_cpu(psataPayload->param); + t = ccb->task; + ts = &t->task_status; + pm8001_dev = ccb->device; + if (status) + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("sata IO status 0x%x\n", status)); + if (unlikely(!t || !t->lldd_task || !t->dev)) + return; + + switch (status) { + case IO_SUCCESS: + PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n")); + if (param == 0) { + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAM_STAT_GOOD; + } else { + u8 len; + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_PROTO_RESPONSE; + ts->residual = param; + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("SAS_PROTO_RESPONSE len = %d\n", + param)); + sata_resp = &psataPayload->sata_resp[0]; + resp = (struct ata_task_resp *)ts->buf; + if (t->ata_task.dma_xfer == 0 && + t->data_dir == PCI_DMA_FROMDEVICE) { + len = sizeof(struct pio_setup_fis); + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("PIO read len = %d\n", len)); + } else if (t->ata_task.use_ncq) { + len = sizeof(struct set_dev_bits_fis); + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("FPDMA len = %d\n", len)); + } else { + len = sizeof(struct dev_to_host_fis); + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("other len = %d\n", len)); + } + if (SAS_STATUS_BUF_SIZE >= sizeof(*resp)) { + resp->frame_len = len; + memcpy(&resp->ending_fis[0], sata_resp, len); + ts->buf_valid_size = sizeof(*resp); + } else + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("response to large\n")); + } + if (pm8001_dev) + pm8001_dev->running_req--; + break; + case IO_ABORTED: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_ABORTED IOMB Tag\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_ABORTED_TASK; + if (pm8001_dev) + pm8001_dev->running_req--; + break; + /* following cases are to do cases */ + case IO_UNDERFLOW: + /* SATA Completion with error */ + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_UNDERFLOW param = %d\n", param)); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_DATA_UNDERRUN; + ts->residual = param; + if (pm8001_dev) + pm8001_dev->running_req--; + break; + case IO_NO_DEVICE: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_NO_DEVICE\n")); + ts->resp = SAS_TASK_UNDELIVERED; + ts->stat = SAS_PHY_DOWN; + break; + case IO_XFER_ERROR_BREAK: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_BREAK\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_INTERRUPTED; + break; + case IO_XFER_ERROR_PHY_NOT_READY: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; + break; + case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED: + PM8001_IO_DBG(pm8001_ha, pm8001_printk( + "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_EPROTO; + break; + case IO_OPEN_CNX_ERROR_ZONE_VIOLATION: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_UNKNOWN; + break; + case IO_OPEN_CNX_ERROR_BREAK: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_RSVD_CONT0; + break; + case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_DEV_NO_RESPONSE; + if (!t->uldd_task) { + pm8001_handle_event(pm8001_ha, + pm8001_dev, + IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS); + ts->resp = SAS_TASK_UNDELIVERED; + ts->stat = SAS_QUEUE_FULL; + pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); + mb();/*in order to force CPU ordering*/ + spin_unlock_irq(&pm8001_ha->lock); + t->task_done(t); + spin_lock_irq(&pm8001_ha->lock); + return; + } + break; + case IO_OPEN_CNX_ERROR_BAD_DESTINATION: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n")); + ts->resp = SAS_TASK_UNDELIVERED; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_BAD_DEST; + if (!t->uldd_task) { + pm8001_handle_event(pm8001_ha, + pm8001_dev, + IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS); + ts->resp = SAS_TASK_UNDELIVERED; + ts->stat = SAS_QUEUE_FULL; + pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); + mb();/*ditto*/ + spin_unlock_irq(&pm8001_ha->lock); + t->task_done(t); + spin_lock_irq(&pm8001_ha->lock); + return; + } + break; + case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED: + PM8001_IO_DBG(pm8001_ha, pm8001_printk( + "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_CONN_RATE; + break; + case IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY: + PM8001_IO_DBG(pm8001_ha, pm8001_printk( + "IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_DEV_NO_RESPONSE; + if (!t->uldd_task) { + pm8001_handle_event(pm8001_ha, + pm8001_dev, + IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY); + ts->resp = SAS_TASK_UNDELIVERED; + ts->stat = SAS_QUEUE_FULL; + pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); + mb();/* ditto*/ + spin_unlock_irq(&pm8001_ha->lock); + t->task_done(t); + spin_lock_irq(&pm8001_ha->lock); + return; + } + break; + case IO_OPEN_CNX_ERROR_WRONG_DESTINATION: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_WRONG_DEST; + break; + case IO_XFER_ERROR_NAK_RECEIVED: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_NAK_R_ERR; + break; + case IO_XFER_ERROR_ACK_NAK_TIMEOUT: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_NAK_R_ERR; + break; + case IO_XFER_ERROR_DMA: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_DMA\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_ABORTED_TASK; + break; + case IO_XFER_ERROR_SATA_LINK_TIMEOUT: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_SATA_LINK_TIMEOUT\n")); + ts->resp = SAS_TASK_UNDELIVERED; + ts->stat = SAS_DEV_NO_RESPONSE; + break; + case IO_XFER_ERROR_REJECTED_NCQ_MODE: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_REJECTED_NCQ_MODE\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_DATA_UNDERRUN; + break; + case IO_XFER_OPEN_RETRY_TIMEOUT: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_TO; + break; + case IO_PORT_IN_RESET: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_PORT_IN_RESET\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_DEV_NO_RESPONSE; + break; + case IO_DS_NON_OPERATIONAL: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_DS_NON_OPERATIONAL\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_DEV_NO_RESPONSE; + if (!t->uldd_task) { + pm8001_handle_event(pm8001_ha, pm8001_dev, + IO_DS_NON_OPERATIONAL); + ts->resp = SAS_TASK_UNDELIVERED; + ts->stat = SAS_QUEUE_FULL; + pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); + mb();/*ditto*/ + spin_unlock_irq(&pm8001_ha->lock); + t->task_done(t); + spin_lock_irq(&pm8001_ha->lock); + return; + } + break; + case IO_DS_IN_RECOVERY: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_DS_IN_RECOVERY\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_DEV_NO_RESPONSE; + break; + case IO_DS_IN_ERROR: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_DS_IN_ERROR\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_DEV_NO_RESPONSE; + if (!t->uldd_task) { + pm8001_handle_event(pm8001_ha, pm8001_dev, + IO_DS_IN_ERROR); + ts->resp = SAS_TASK_UNDELIVERED; + ts->stat = SAS_QUEUE_FULL; + pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); + mb();/*ditto*/ + spin_unlock_irq(&pm8001_ha->lock); + t->task_done(t); + spin_lock_irq(&pm8001_ha->lock); + return; + } + break; + case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; + default: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("Unknown status 0x%x\n", status)); + /* not allowed case. Therefore, return failed status */ + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_DEV_NO_RESPONSE; + break; + } + spin_lock_irqsave(&t->task_state_lock, flags); + t->task_state_flags &= ~SAS_TASK_STATE_PENDING; + t->task_state_flags &= ~SAS_TASK_AT_INITIATOR; + t->task_state_flags |= SAS_TASK_STATE_DONE; + if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) { + spin_unlock_irqrestore(&t->task_state_lock, flags); + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("task 0x%p done with io_status 0x%x" + " resp 0x%x stat 0x%x but aborted by upper layer!\n", + t, status, ts->resp, ts->stat)); + pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); + } else if (t->uldd_task) { + spin_unlock_irqrestore(&t->task_state_lock, flags); + pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); + mb();/* ditto */ + spin_unlock_irq(&pm8001_ha->lock); + t->task_done(t); + spin_lock_irq(&pm8001_ha->lock); + } else if (!t->uldd_task) { + spin_unlock_irqrestore(&t->task_state_lock, flags); + pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); + mb();/*ditto*/ + spin_unlock_irq(&pm8001_ha->lock); + t->task_done(t); + spin_lock_irq(&pm8001_ha->lock); + } +} + +/*See the comments for mpi_ssp_completion */ +static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb) +{ + struct sas_task *t; + struct task_status_struct *ts; + struct pm8001_ccb_info *ccb; + struct pm8001_device *pm8001_dev; + struct sata_event_resp *psataPayload = + (struct sata_event_resp *)(piomb + 4); + u32 event = le32_to_cpu(psataPayload->event); + u32 tag = le32_to_cpu(psataPayload->tag); + u32 port_id = le32_to_cpu(psataPayload->port_id); + unsigned long flags = 0; + + ccb = &pm8001_ha->ccb_info[tag]; + t = ccb->task; + pm8001_dev = ccb->device; + if (event) + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("sata IO status 0x%x\n", event)); + if (unlikely(!t || !t->lldd_task || !t->dev)) + return; + ts = &t->task_status; + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("port_id:0x%x, tag:0x%x, event:0x%x\n", + port_id, tag, event)); + switch (event) { + case IO_OVERFLOW: + PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_DATA_OVERRUN; + ts->residual = 0; + if (pm8001_dev) + pm8001_dev->running_req--; + break; + case IO_XFER_ERROR_BREAK: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_BREAK\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_INTERRUPTED; + break; + case IO_XFER_ERROR_PHY_NOT_READY: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; + break; + case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED: + PM8001_IO_DBG(pm8001_ha, pm8001_printk( + "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_EPROTO; + break; + case IO_OPEN_CNX_ERROR_ZONE_VIOLATION: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_UNKNOWN; + break; + case IO_OPEN_CNX_ERROR_BREAK: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_RSVD_CONT0; + break; + case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n")); + ts->resp = SAS_TASK_UNDELIVERED; + ts->stat = SAS_DEV_NO_RESPONSE; + if (!t->uldd_task) { + pm8001_handle_event(pm8001_ha, + pm8001_dev, + IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_QUEUE_FULL; + pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); + mb();/*ditto*/ + spin_unlock_irq(&pm8001_ha->lock); + t->task_done(t); + spin_lock_irq(&pm8001_ha->lock); + return; + } + break; + case IO_OPEN_CNX_ERROR_BAD_DESTINATION: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n")); + ts->resp = SAS_TASK_UNDELIVERED; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_BAD_DEST; + break; + case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED: + PM8001_IO_DBG(pm8001_ha, pm8001_printk( + "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_CONN_RATE; + break; + case IO_OPEN_CNX_ERROR_WRONG_DESTINATION: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_WRONG_DEST; + break; + case IO_XFER_ERROR_NAK_RECEIVED: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_NAK_R_ERR; + break; + case IO_XFER_ERROR_PEER_ABORTED: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_PEER_ABORTED\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_NAK_R_ERR; + break; + case IO_XFER_ERROR_REJECTED_NCQ_MODE: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_REJECTED_NCQ_MODE\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_DATA_UNDERRUN; + break; + case IO_XFER_OPEN_RETRY_TIMEOUT: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_TO; + break; + case IO_XFER_ERROR_UNEXPECTED_PHASE: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_UNEXPECTED_PHASE\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_TO; + break; + case IO_XFER_ERROR_XFER_RDY_OVERRUN: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_XFER_RDY_OVERRUN\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_TO; + break; + case IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_TO; + break; + case IO_XFER_ERROR_OFFSET_MISMATCH: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_TO; + break; + case IO_XFER_ERROR_XFER_ZERO_DATA_LEN: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_TO; + break; + case IO_XFER_CMD_FRAME_ISSUED: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_CMD_FRAME_ISSUED\n")); + break; + case IO_XFER_PIO_SETUP_ERROR: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_PIO_SETUP_ERROR\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_TO; + break; + default: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("Unknown status 0x%x\n", event)); + /* not allowed case. Therefore, return failed status */ + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_TO; + break; + } + spin_lock_irqsave(&t->task_state_lock, flags); + t->task_state_flags &= ~SAS_TASK_STATE_PENDING; + t->task_state_flags &= ~SAS_TASK_AT_INITIATOR; + t->task_state_flags |= SAS_TASK_STATE_DONE; + if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) { + spin_unlock_irqrestore(&t->task_state_lock, flags); + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("task 0x%p done with io_status 0x%x" + " resp 0x%x stat 0x%x but aborted by upper layer!\n", + t, event, ts->resp, ts->stat)); + pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); + } else if (t->uldd_task) { + spin_unlock_irqrestore(&t->task_state_lock, flags); + pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); + mb();/* ditto */ + spin_unlock_irq(&pm8001_ha->lock); + t->task_done(t); + spin_lock_irq(&pm8001_ha->lock); + } else if (!t->uldd_task) { + spin_unlock_irqrestore(&t->task_state_lock, flags); + pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); + mb();/*ditto*/ + spin_unlock_irq(&pm8001_ha->lock); + t->task_done(t); + spin_lock_irq(&pm8001_ha->lock); + } +} + +/*See the comments for mpi_ssp_completion */ +static void +mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) +{ + u32 param, i; + struct sas_task *t; + struct pm8001_ccb_info *ccb; + unsigned long flags; + u32 status; + u32 tag; + struct smp_completion_resp *psmpPayload; + struct task_status_struct *ts; + struct pm8001_device *pm8001_dev; + char *pdma_respaddr = NULL; + + psmpPayload = (struct smp_completion_resp *)(piomb + 4); + status = le32_to_cpu(psmpPayload->status); + tag = le32_to_cpu(psmpPayload->tag); + + ccb = &pm8001_ha->ccb_info[tag]; + param = le32_to_cpu(psmpPayload->param); + t = ccb->task; + ts = &t->task_status; + pm8001_dev = ccb->device; + if (status) + PM8001_FAIL_DBG(pm8001_ha, + pm8001_printk("smp IO status 0x%x\n", status)); + if (unlikely(!t || !t->lldd_task || !t->dev)) + return; + + switch (status) { + + case IO_SUCCESS: + PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAM_STAT_GOOD; + if (pm8001_dev) + pm8001_dev->running_req--; + if (pm8001_ha->smp_exp_mode == SMP_DIRECT) { + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("DIRECT RESPONSE Length:%d\n", + param)); + pdma_respaddr = (char *)(phys_to_virt(cpu_to_le64 + ((u64)sg_dma_address + (&t->smp_task.smp_resp)))); + for (i = 0; i < param; i++) { + *(pdma_respaddr+i) = psmpPayload->_r_a[i]; + PM8001_IO_DBG(pm8001_ha, pm8001_printk( + "SMP Byte%d DMA data 0x%x psmp 0x%x\n", + i, *(pdma_respaddr+i), + psmpPayload->_r_a[i])); + } + } + break; + case IO_ABORTED: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_ABORTED IOMB\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_ABORTED_TASK; + if (pm8001_dev) + pm8001_dev->running_req--; + break; + case IO_OVERFLOW: + PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_DATA_OVERRUN; + ts->residual = 0; + if (pm8001_dev) + pm8001_dev->running_req--; + break; + case IO_NO_DEVICE: + PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_NO_DEVICE\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_PHY_DOWN; + break; + case IO_ERROR_HW_TIMEOUT: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_ERROR_HW_TIMEOUT\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAM_STAT_BUSY; + break; + case IO_XFER_ERROR_BREAK: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_BREAK\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAM_STAT_BUSY; + break; + case IO_XFER_ERROR_PHY_NOT_READY: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAM_STAT_BUSY; + break; + case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_UNKNOWN; + break; + case IO_OPEN_CNX_ERROR_ZONE_VIOLATION: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_UNKNOWN; + break; + case IO_OPEN_CNX_ERROR_BREAK: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_RSVD_CONT0; + break; + case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_UNKNOWN; + pm8001_handle_event(pm8001_ha, + pm8001_dev, + IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS); + break; + case IO_OPEN_CNX_ERROR_BAD_DESTINATION: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_BAD_DEST; + break; + case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED: + PM8001_IO_DBG(pm8001_ha, pm8001_printk(\ + "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_CONN_RATE; + break; + case IO_OPEN_CNX_ERROR_WRONG_DESTINATION: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_WRONG_DEST; + break; + case IO_XFER_ERROR_RX_FRAME: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_ERROR_RX_FRAME\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_DEV_NO_RESPONSE; + break; + case IO_XFER_OPEN_RETRY_TIMEOUT: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; + break; + case IO_ERROR_INTERNAL_SMP_RESOURCE: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_ERROR_INTERNAL_SMP_RESOURCE\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_QUEUE_FULL; + break; + case IO_PORT_IN_RESET: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_PORT_IN_RESET\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; + break; + case IO_DS_NON_OPERATIONAL: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_DS_NON_OPERATIONAL\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_DEV_NO_RESPONSE; + break; + case IO_DS_IN_RECOVERY: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_DS_IN_RECOVERY\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; + break; + case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n")); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_OPEN_REJECT; + ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; + break; + default: + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("Unknown status 0x%x\n", status)); + ts->resp = SAS_TASK_COMPLETE; + ts->stat = SAS_DEV_NO_RESPONSE; + /* not allowed case. Therefore, return failed status */ + break; + } + spin_lock_irqsave(&t->task_state_lock, flags); + t->task_state_flags &= ~SAS_TASK_STATE_PENDING; + t->task_state_flags &= ~SAS_TASK_AT_INITIATOR; + t->task_state_flags |= SAS_TASK_STATE_DONE; + if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) { + spin_unlock_irqrestore(&t->task_state_lock, flags); + PM8001_FAIL_DBG(pm8001_ha, pm8001_printk( + "task 0x%p done with io_status 0x%x resp 0x%x" + "stat 0x%x but aborted by upper layer!\n", + t, status, ts->resp, ts->stat)); + pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); + } else { + spin_unlock_irqrestore(&t->task_state_lock, flags); + pm8001_ccb_task_free(pm8001_ha, t, ccb, tag); + mb();/* in order to force CPU ordering */ + t->task_done(t); + } +} + +/** + * pm80xx_hw_event_ack_req- For PM8001,some events need to acknowage to FW. + * @pm8001_ha: our hba card information + * @Qnum: the outbound queue message number. + * @SEA: source of event to ack + * @port_id: port id. + * @phyId: phy id. + * @param0: parameter 0. + * @param1: parameter 1. + */ +static void pm80xx_hw_event_ack_req(struct pm8001_hba_info *pm8001_ha, + u32 Qnum, u32 SEA, u32 port_id, u32 phyId, u32 param0, u32 param1) +{ + struct hw_event_ack_req payload; + u32 opc = OPC_INB_SAS_HW_EVENT_ACK; + + struct inbound_queue_table *circularQ; + + memset((u8 *)&payload, 0, sizeof(payload)); + circularQ = &pm8001_ha->inbnd_q_tbl[Qnum]; + payload.tag = cpu_to_le32(1); + payload.phyid_sea_portid = cpu_to_le32(((SEA & 0xFFFF) << 8) | + ((phyId & 0xFF) << 24) | (port_id & 0xFF)); + payload.param0 = cpu_to_le32(param0); + payload.param1 = cpu_to_le32(param1); + pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0); +} + +static int pm80xx_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha, + u32 phyId, u32 phy_op); + +/** + * hw_event_sas_phy_up -FW tells me a SAS phy up event. + * @pm8001_ha: our hba card information + * @piomb: IO message buffer + */ +static void +hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) +{ + struct hw_event_resp *pPayload = + (struct hw_event_resp *)(piomb + 4); + u32 lr_status_evt_portid = + le32_to_cpu(pPayload->lr_status_evt_portid); + u32 phyid_npip_portstate = le32_to_cpu(pPayload->phyid_npip_portstate); + + u8 link_rate = + (u8)((lr_status_evt_portid & 0xF0000000) >> 28); + u8 port_id = (u8)(lr_status_evt_portid & 0x000000FF); + u8 phy_id = + (u8)((phyid_npip_portstate & 0xFF0000) >> 16); + u8 portstate = (u8)(phyid_npip_portstate & 0x0000000F); + + struct pm8001_port *port = &pm8001_ha->port[port_id]; + struct sas_ha_struct *sas_ha = pm8001_ha->sas; + struct pm8001_phy *phy = &pm8001_ha->phy[phy_id]; + unsigned long flags; + u8 deviceType = pPayload->sas_identify.dev_type; + port->port_state = portstate; + PM8001_MSG_DBG(pm8001_ha, pm8001_printk( + "portid:%d; phyid:%d; linkrate:%d; " + "portstate:%x; devicetype:%x\n", + port_id, phy_id, link_rate, portstate, deviceType)); + + switch (deviceType) { + case SAS_PHY_UNUSED: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("device type no device.\n")); + break; + case SAS_END_DEVICE: + PM8001_MSG_DBG(pm8001_ha, pm8001_printk("end device.\n")); + pm80xx_chip_phy_ctl_req(pm8001_ha, phy_id, + PHY_NOTIFY_ENABLE_SPINUP); + port->port_attached = 1; + pm8001_get_lrate_mode(phy, link_rate); + break; + case SAS_EDGE_EXPANDER_DEVICE: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("expander device.\n")); + port->port_attached = 1; + pm8001_get_lrate_mode(phy, link_rate); + break; + case SAS_FANOUT_EXPANDER_DEVICE: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("fanout expander device.\n")); + port->port_attached = 1; + pm8001_get_lrate_mode(phy, link_rate); + break; + default: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("unknown device type(%x)\n", deviceType)); + break; + } + phy->phy_type |= PORT_TYPE_SAS; + phy->identify.device_type = deviceType; + phy->phy_attached = 1; + if (phy->identify.device_type == SAS_END_DEVICE) + phy->identify.target_port_protocols = SAS_PROTOCOL_SSP; + else if (phy->identify.device_type != SAS_PHY_UNUSED) + phy->identify.target_port_protocols = SAS_PROTOCOL_SMP; + phy->sas_phy.oob_mode = SAS_OOB_MODE; + sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE); + spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags); + memcpy(phy->frame_rcvd, &pPayload->sas_identify, + sizeof(struct sas_identify_frame)-4); + phy->frame_rcvd_size = sizeof(struct sas_identify_frame) - 4; + pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr); + spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags); + if (pm8001_ha->flags == PM8001F_RUN_TIME) + mdelay(200);/*delay a moment to wait disk to spinup*/ + pm8001_bytes_dmaed(pm8001_ha, phy_id); +} + +/** + * hw_event_sata_phy_up -FW tells me a SATA phy up event. + * @pm8001_ha: our hba card information + * @piomb: IO message buffer + */ +static void +hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb) +{ + struct hw_event_resp *pPayload = + (struct hw_event_resp *)(piomb + 4); + u32 phyid_npip_portstate = le32_to_cpu(pPayload->phyid_npip_portstate); + u32 lr_status_evt_portid = + le32_to_cpu(pPayload->lr_status_evt_portid); + u8 link_rate = + (u8)((lr_status_evt_portid & 0xF0000000) >> 28); + u8 port_id = (u8)(lr_status_evt_portid & 0x000000FF); + u8 phy_id = + (u8)((phyid_npip_portstate & 0xFF0000) >> 16); + + u8 portstate = (u8)(phyid_npip_portstate & 0x0000000F); + + struct pm8001_port *port = &pm8001_ha->port[port_id]; + struct sas_ha_struct *sas_ha = pm8001_ha->sas; + struct pm8001_phy *phy = &pm8001_ha->phy[phy_id]; + unsigned long flags; + PM8001_MSG_DBG(pm8001_ha, pm8001_printk( + "port id %d, phy id %d link_rate %d portstate 0x%x\n", + port_id, phy_id, link_rate, portstate)); + + port->port_state = portstate; + port->port_attached = 1; + pm8001_get_lrate_mode(phy, link_rate); + phy->phy_type |= PORT_TYPE_SATA; + phy->phy_attached = 1; + phy->sas_phy.oob_mode = SATA_OOB_MODE; + sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE); + spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags); + memcpy(phy->frame_rcvd, ((u8 *)&pPayload->sata_fis - 4), + sizeof(struct dev_to_host_fis)); + phy->frame_rcvd_size = sizeof(struct dev_to_host_fis); + phy->identify.target_port_protocols = SAS_PROTOCOL_SATA; + phy->identify.device_type = SATA_DEV; + pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr); + spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags); + pm8001_bytes_dmaed(pm8001_ha, phy_id); +} + +/** + * hw_event_phy_down -we should notify the libsas the phy is down. + * @pm8001_ha: our hba card information + * @piomb: IO message buffer + */ +static void +hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb) +{ + struct hw_event_resp *pPayload = + (struct hw_event_resp *)(piomb + 4); + + u32 lr_status_evt_portid = + le32_to_cpu(pPayload->lr_status_evt_portid); + u8 port_id = (u8)(lr_status_evt_portid & 0x000000FF); + u32 phyid_npip_portstate = le32_to_cpu(pPayload->phyid_npip_portstate); + u8 phy_id = + (u8)((phyid_npip_portstate & 0xFF0000) >> 16); + u8 portstate = (u8)(phyid_npip_portstate & 0x0000000F); + + struct pm8001_port *port = &pm8001_ha->port[port_id]; + struct pm8001_phy *phy = &pm8001_ha->phy[phy_id]; + port->port_state = portstate; + phy->phy_type = 0; + phy->identify.device_type = 0; + phy->phy_attached = 0; + memset(&phy->dev_sas_addr, 0, SAS_ADDR_SIZE); + switch (portstate) { + case PORT_VALID: + break; + case PORT_INVALID: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk(" PortInvalid portID %d\n", port_id)); + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk(" Last phy Down and port invalid\n")); + port->port_attached = 0; + pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN, + port_id, phy_id, 0, 0); + break; + case PORT_IN_RESET: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk(" Port In Reset portID %d\n", port_id)); + break; + case PORT_NOT_ESTABLISHED: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk(" phy Down and PORT_NOT_ESTABLISHED\n")); + port->port_attached = 0; + break; + case PORT_LOSTCOMM: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk(" phy Down and PORT_LOSTCOMM\n")); + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk(" Last phy Down and port invalid\n")); + port->port_attached = 0; + pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN, + port_id, phy_id, 0, 0); + break; + default: + port->port_attached = 0; + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk(" phy Down and(default) = 0x%x\n", + portstate)); + break; + + } +} + +static int mpi_phy_start_resp(struct pm8001_hba_info *pm8001_ha, void *piomb) +{ + struct phy_start_resp *pPayload = + (struct phy_start_resp *)(piomb + 4); + u32 status = + le32_to_cpu(pPayload->status); + u32 phy_id = + le32_to_cpu(pPayload->phyid); + struct pm8001_phy *phy = &pm8001_ha->phy[phy_id]; + + PM8001_INIT_DBG(pm8001_ha, + pm8001_printk("phy start resp status:0x%x, phyid:0x%x\n", + status, phy_id)); + if (status == 0) { + phy->phy_state = 1; + if (pm8001_ha->flags == PM8001F_RUN_TIME) + complete(phy->enable_completion); + } + return 0; + +} + +/** + * mpi_thermal_hw_event -The hw event has come. + * @pm8001_ha: our hba card information + * @piomb: IO message buffer + */ +static int mpi_thermal_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb) +{ + struct thermal_hw_event *pPayload = + (struct thermal_hw_event *)(piomb + 4); + + u32 thermal_event = le32_to_cpu(pPayload->thermal_event); + u32 rht_lht = le32_to_cpu(pPayload->rht_lht); + + if (thermal_event & 0x40) { + PM8001_IO_DBG(pm8001_ha, pm8001_printk( + "Thermal Event: Local high temperature violated!\n")); + PM8001_IO_DBG(pm8001_ha, pm8001_printk( + "Thermal Event: Measured local high temperature %d\n", + ((rht_lht & 0xFF00) >> 8))); + } + if (thermal_event & 0x10) { + PM8001_IO_DBG(pm8001_ha, pm8001_printk( + "Thermal Event: Remote high temperature violated!\n")); + PM8001_IO_DBG(pm8001_ha, pm8001_printk( + "Thermal Event: Measured remote high temperature %d\n", + ((rht_lht & 0xFF000000) >> 24))); + } + return 0; +} + +/** + * mpi_hw_event -The hw event has come. + * @pm8001_ha: our hba card information + * @piomb: IO message buffer + */ +static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb) +{ + unsigned long flags; + struct hw_event_resp *pPayload = + (struct hw_event_resp *)(piomb + 4); + u32 lr_status_evt_portid = + le32_to_cpu(pPayload->lr_status_evt_portid); + u32 phyid_npip_portstate = le32_to_cpu(pPayload->phyid_npip_portstate); + u8 port_id = (u8)(lr_status_evt_portid & 0x000000FF); + u8 phy_id = + (u8)((phyid_npip_portstate & 0xFF0000) >> 16); + u16 eventType = + (u16)((lr_status_evt_portid & 0x00FFFF00) >> 8); + u8 status = + (u8)((lr_status_evt_portid & 0x0F000000) >> 24); + + struct sas_ha_struct *sas_ha = pm8001_ha->sas; + struct pm8001_phy *phy = &pm8001_ha->phy[phy_id]; + struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id]; + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("portid:%d phyid:%d event:0x%x status:0x%x\n", + port_id, phy_id, eventType, status)); + + switch (eventType) { + + case HW_EVENT_SAS_PHY_UP: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("HW_EVENT_PHY_START_STATUS\n")); + hw_event_sas_phy_up(pm8001_ha, piomb); + break; + case HW_EVENT_SATA_PHY_UP: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("HW_EVENT_SATA_PHY_UP\n")); + hw_event_sata_phy_up(pm8001_ha, piomb); + break; + case HW_EVENT_SATA_SPINUP_HOLD: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("HW_EVENT_SATA_SPINUP_HOLD\n")); + sas_ha->notify_phy_event(&phy->sas_phy, PHYE_SPINUP_HOLD); + break; + case HW_EVENT_PHY_DOWN: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("HW_EVENT_PHY_DOWN\n")); + sas_ha->notify_phy_event(&phy->sas_phy, PHYE_LOSS_OF_SIGNAL); + phy->phy_attached = 0; + phy->phy_state = 0; + hw_event_phy_down(pm8001_ha, piomb); + break; + case HW_EVENT_PORT_INVALID: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("HW_EVENT_PORT_INVALID\n")); + sas_phy_disconnected(sas_phy); + phy->phy_attached = 0; + sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR); + break; + /* the broadcast change primitive received, tell the LIBSAS this event + to revalidate the sas domain*/ + case HW_EVENT_BROADCAST_CHANGE: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("HW_EVENT_BROADCAST_CHANGE\n")); + pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_BROADCAST_CHANGE, + port_id, phy_id, 1, 0); + spin_lock_irqsave(&sas_phy->sas_prim_lock, flags); + sas_phy->sas_prim = HW_EVENT_BROADCAST_CHANGE; + spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags); + sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD); + break; + case HW_EVENT_PHY_ERROR: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("HW_EVENT_PHY_ERROR\n")); + sas_phy_disconnected(&phy->sas_phy); + phy->phy_attached = 0; + sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_ERROR); + break; + case HW_EVENT_BROADCAST_EXP: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("HW_EVENT_BROADCAST_EXP\n")); + spin_lock_irqsave(&sas_phy->sas_prim_lock, flags); + sas_phy->sas_prim = HW_EVENT_BROADCAST_EXP; + spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags); + sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD); + break; + case HW_EVENT_LINK_ERR_INVALID_DWORD: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("HW_EVENT_LINK_ERR_INVALID_DWORD\n")); + pm80xx_hw_event_ack_req(pm8001_ha, 0, + HW_EVENT_LINK_ERR_INVALID_DWORD, port_id, phy_id, 0, 0); + sas_phy_disconnected(sas_phy); + phy->phy_attached = 0; + sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR); + break; + case HW_EVENT_LINK_ERR_DISPARITY_ERROR: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("HW_EVENT_LINK_ERR_DISPARITY_ERROR\n")); + pm80xx_hw_event_ack_req(pm8001_ha, 0, + HW_EVENT_LINK_ERR_DISPARITY_ERROR, + port_id, phy_id, 0, 0); + sas_phy_disconnected(sas_phy); + phy->phy_attached = 0; + sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR); + break; + case HW_EVENT_LINK_ERR_CODE_VIOLATION: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("HW_EVENT_LINK_ERR_CODE_VIOLATION\n")); + pm80xx_hw_event_ack_req(pm8001_ha, 0, + HW_EVENT_LINK_ERR_CODE_VIOLATION, + port_id, phy_id, 0, 0); + sas_phy_disconnected(sas_phy); + phy->phy_attached = 0; + sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR); + break; + case HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH: + PM8001_MSG_DBG(pm8001_ha, pm8001_printk( + "HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH\n")); + pm80xx_hw_event_ack_req(pm8001_ha, 0, + HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH, + port_id, phy_id, 0, 0); + sas_phy_disconnected(sas_phy); + phy->phy_attached = 0; + sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR); + break; + case HW_EVENT_MALFUNCTION: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("HW_EVENT_MALFUNCTION\n")); + break; + case HW_EVENT_BROADCAST_SES: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("HW_EVENT_BROADCAST_SES\n")); + spin_lock_irqsave(&sas_phy->sas_prim_lock, flags); + sas_phy->sas_prim = HW_EVENT_BROADCAST_SES; + spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags); + sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD); + break; + case HW_EVENT_INBOUND_CRC_ERROR: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("HW_EVENT_INBOUND_CRC_ERROR\n")); + pm80xx_hw_event_ack_req(pm8001_ha, 0, + HW_EVENT_INBOUND_CRC_ERROR, + port_id, phy_id, 0, 0); + break; + case HW_EVENT_HARD_RESET_RECEIVED: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("HW_EVENT_HARD_RESET_RECEIVED\n")); + sas_ha->notify_port_event(sas_phy, PORTE_HARD_RESET); + break; + case HW_EVENT_ID_FRAME_TIMEOUT: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("HW_EVENT_ID_FRAME_TIMEOUT\n")); + sas_phy_disconnected(sas_phy); + phy->phy_attached = 0; + sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR); + break; + case HW_EVENT_LINK_ERR_PHY_RESET_FAILED: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("HW_EVENT_LINK_ERR_PHY_RESET_FAILED\n")); + pm80xx_hw_event_ack_req(pm8001_ha, 0, + HW_EVENT_LINK_ERR_PHY_RESET_FAILED, + port_id, phy_id, 0, 0); + sas_phy_disconnected(sas_phy); + phy->phy_attached = 0; + sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR); + break; + case HW_EVENT_PORT_RESET_TIMER_TMO: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("HW_EVENT_PORT_RESET_TIMER_TMO\n")); + sas_phy_disconnected(sas_phy); + phy->phy_attached = 0; + sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR); + break; + case HW_EVENT_PORT_RECOVERY_TIMER_TMO: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("HW_EVENT_PORT_RECOVERY_TIMER_TMO\n")); + sas_phy_disconnected(sas_phy); + phy->phy_attached = 0; + sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR); + break; + case HW_EVENT_PORT_RECOVER: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("HW_EVENT_PORT_RECOVER\n")); + break; + case HW_EVENT_PORT_RESET_COMPLETE: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("HW_EVENT_PORT_RESET_COMPLETE\n")); + break; + case EVENT_BROADCAST_ASYNCH_EVENT: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("EVENT_BROADCAST_ASYNCH_EVENT\n")); + break; + default: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("Unknown event type 0x%x\n", eventType)); + break; + } + return 0; +} + +/** + * mpi_phy_stop_resp - SPCv specific + * @pm8001_ha: our hba card information + * @piomb: IO message buffer + */ +static int mpi_phy_stop_resp(struct pm8001_hba_info *pm8001_ha, void *piomb) +{ + struct phy_stop_resp *pPayload = + (struct phy_stop_resp *)(piomb + 4); + u32 status = + le32_to_cpu(pPayload->status); + u32 phyid = + le32_to_cpu(pPayload->phyid); + struct pm8001_phy *phy = &pm8001_ha->phy[phyid]; + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("phy:0x%x status:0x%x\n", + phyid, status)); + if (status == 0) + phy->phy_state = 0; + return 0; +} + +/** + * mpi_set_controller_config_resp - SPCv specific + * @pm8001_ha: our hba card information + * @piomb: IO message buffer + */ +static int mpi_set_controller_config_resp(struct pm8001_hba_info *pm8001_ha, + void *piomb) +{ + struct set_ctrl_cfg_resp *pPayload = + (struct set_ctrl_cfg_resp *)(piomb + 4); + u32 status = le32_to_cpu(pPayload->status); + u32 err_qlfr_pgcd = le32_to_cpu(pPayload->err_qlfr_pgcd); + + PM8001_MSG_DBG(pm8001_ha, pm8001_printk( + "SET CONTROLLER RESP: status 0x%x qlfr_pgcd 0x%x\n", + status, err_qlfr_pgcd)); + + return 0; +} + +/** + * mpi_get_controller_config_resp - SPCv specific + * @pm8001_ha: our hba card information + * @piomb: IO message buffer + */ +static int mpi_get_controller_config_resp(struct pm8001_hba_info *pm8001_ha, + void *piomb) +{ + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk(" pm80xx_addition_functionality\n")); + + return 0; +} + +/** + * mpi_get_phy_profile_resp - SPCv specific + * @pm8001_ha: our hba card information + * @piomb: IO message buffer + */ +static int mpi_get_phy_profile_resp(struct pm8001_hba_info *pm8001_ha, + void *piomb) +{ + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk(" pm80xx_addition_functionality\n")); + + return 0; +} + +/** + * mpi_flash_op_ext_resp - SPCv specific + * @pm8001_ha: our hba card information + * @piomb: IO message buffer + */ +static int mpi_flash_op_ext_resp(struct pm8001_hba_info *pm8001_ha, void *piomb) +{ + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk(" pm80xx_addition_functionality\n")); + + return 0; +} + +/** + * mpi_set_phy_profile_resp - SPCv specific + * @pm8001_ha: our hba card information + * @piomb: IO message buffer + */ +static int mpi_set_phy_profile_resp(struct pm8001_hba_info *pm8001_ha, + void *piomb) +{ + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk(" pm80xx_addition_functionality\n")); + + return 0; +} + +/** + * mpi_kek_management_resp - SPCv specific + * @pm8001_ha: our hba card information + * @piomb: IO message buffer + */ +static int mpi_kek_management_resp(struct pm8001_hba_info *pm8001_ha, + void *piomb) +{ + struct kek_mgmt_resp *pPayload = (struct kek_mgmt_resp *)(piomb + 4); + + u32 status = le32_to_cpu(pPayload->status); + u32 kidx_new_curr_ksop = le32_to_cpu(pPayload->kidx_new_curr_ksop); + u32 err_qlfr = le32_to_cpu(pPayload->err_qlfr); + + PM8001_MSG_DBG(pm8001_ha, pm8001_printk( + "KEK MGMT RESP. Status 0x%x idx_ksop 0x%x err_qlfr 0x%x\n", + status, kidx_new_curr_ksop, err_qlfr)); + + return 0; +} + +/** + * mpi_dek_management_resp - SPCv specific + * @pm8001_ha: our hba card information + * @piomb: IO message buffer + */ +static int mpi_dek_management_resp(struct pm8001_hba_info *pm8001_ha, + void *piomb) +{ + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk(" pm80xx_addition_functionality\n")); + + return 0; +} + +/** + * ssp_coalesced_comp_resp - SPCv specific + * @pm8001_ha: our hba card information + * @piomb: IO message buffer + */ +static int ssp_coalesced_comp_resp(struct pm8001_hba_info *pm8001_ha, + void *piomb) +{ + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk(" pm80xx_addition_functionality\n")); + + return 0; +} + +/** + * process_one_iomb - process one outbound Queue memory block + * @pm8001_ha: our hba card information + * @piomb: IO message buffer + */ +static void process_one_iomb(struct pm8001_hba_info *pm8001_ha, void *piomb) +{ + __le32 pHeader = *(__le32 *)piomb; + u32 opc = (u32)((le32_to_cpu(pHeader)) & 0xFFF); + + switch (opc) { + case OPC_OUB_ECHO: + PM8001_MSG_DBG(pm8001_ha, pm8001_printk("OPC_OUB_ECHO\n")); + break; + case OPC_OUB_HW_EVENT: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("OPC_OUB_HW_EVENT\n")); + mpi_hw_event(pm8001_ha, piomb); + break; + case OPC_OUB_THERM_HW_EVENT: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("OPC_OUB_THERMAL_EVENT\n")); + mpi_thermal_hw_event(pm8001_ha, piomb); + break; + case OPC_OUB_SSP_COMP: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("OPC_OUB_SSP_COMP\n")); + mpi_ssp_completion(pm8001_ha, piomb); + break; + case OPC_OUB_SMP_COMP: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("OPC_OUB_SMP_COMP\n")); + mpi_smp_completion(pm8001_ha, piomb); + break; + case OPC_OUB_LOCAL_PHY_CNTRL: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("OPC_OUB_LOCAL_PHY_CNTRL\n")); + pm8001_mpi_local_phy_ctl(pm8001_ha, piomb); + break; + case OPC_OUB_DEV_REGIST: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("OPC_OUB_DEV_REGIST\n")); + pm8001_mpi_reg_resp(pm8001_ha, piomb); + break; + case OPC_OUB_DEREG_DEV: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("unresgister the deviece\n")); + pm8001_mpi_dereg_resp(pm8001_ha, piomb); + break; + case OPC_OUB_GET_DEV_HANDLE: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("OPC_OUB_GET_DEV_HANDLE\n")); + break; + case OPC_OUB_SATA_COMP: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("OPC_OUB_SATA_COMP\n")); + mpi_sata_completion(pm8001_ha, piomb); + break; + case OPC_OUB_SATA_EVENT: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("OPC_OUB_SATA_EVENT\n")); + mpi_sata_event(pm8001_ha, piomb); + break; + case OPC_OUB_SSP_EVENT: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("OPC_OUB_SSP_EVENT\n")); + mpi_ssp_event(pm8001_ha, piomb); + break; + case OPC_OUB_DEV_HANDLE_ARRIV: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("OPC_OUB_DEV_HANDLE_ARRIV\n")); + /*This is for target*/ + break; + case OPC_OUB_SSP_RECV_EVENT: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("OPC_OUB_SSP_RECV_EVENT\n")); + /*This is for target*/ + break; + case OPC_OUB_FW_FLASH_UPDATE: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("OPC_OUB_FW_FLASH_UPDATE\n")); + pm8001_mpi_fw_flash_update_resp(pm8001_ha, piomb); + break; + case OPC_OUB_GPIO_RESPONSE: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("OPC_OUB_GPIO_RESPONSE\n")); + break; + case OPC_OUB_GPIO_EVENT: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("OPC_OUB_GPIO_EVENT\n")); + break; + case OPC_OUB_GENERAL_EVENT: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("OPC_OUB_GENERAL_EVENT\n")); + pm8001_mpi_general_event(pm8001_ha, piomb); + break; + case OPC_OUB_SSP_ABORT_RSP: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("OPC_OUB_SSP_ABORT_RSP\n")); + pm8001_mpi_task_abort_resp(pm8001_ha, piomb); + break; + case OPC_OUB_SATA_ABORT_RSP: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("OPC_OUB_SATA_ABORT_RSP\n")); + pm8001_mpi_task_abort_resp(pm8001_ha, piomb); + break; + case OPC_OUB_SAS_DIAG_MODE_START_END: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("OPC_OUB_SAS_DIAG_MODE_START_END\n")); + break; + case OPC_OUB_SAS_DIAG_EXECUTE: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("OPC_OUB_SAS_DIAG_EXECUTE\n")); + break; + case OPC_OUB_GET_TIME_STAMP: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("OPC_OUB_GET_TIME_STAMP\n")); + break; + case OPC_OUB_SAS_HW_EVENT_ACK: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("OPC_OUB_SAS_HW_EVENT_ACK\n")); + break; + case OPC_OUB_PORT_CONTROL: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("OPC_OUB_PORT_CONTROL\n")); + break; + case OPC_OUB_SMP_ABORT_RSP: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("OPC_OUB_SMP_ABORT_RSP\n")); + pm8001_mpi_task_abort_resp(pm8001_ha, piomb); + break; + case OPC_OUB_GET_NVMD_DATA: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("OPC_OUB_GET_NVMD_DATA\n")); + pm8001_mpi_get_nvmd_resp(pm8001_ha, piomb); + break; + case OPC_OUB_SET_NVMD_DATA: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("OPC_OUB_SET_NVMD_DATA\n")); + pm8001_mpi_set_nvmd_resp(pm8001_ha, piomb); + break; + case OPC_OUB_DEVICE_HANDLE_REMOVAL: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("OPC_OUB_DEVICE_HANDLE_REMOVAL\n")); + break; + case OPC_OUB_SET_DEVICE_STATE: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("OPC_OUB_SET_DEVICE_STATE\n")); + pm8001_mpi_set_dev_state_resp(pm8001_ha, piomb); + break; + case OPC_OUB_GET_DEVICE_STATE: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("OPC_OUB_GET_DEVICE_STATE\n")); + break; + case OPC_OUB_SET_DEV_INFO: + PM8001_MSG_DBG(pm8001_ha, + pm8001_printk("OPC_OUB_SET_DEV_INFO\n")); + break; + /* spcv specifc commands */ + case OPC_OUB_PHY_START_RESP: + PM8001_MSG_DBG(pm8001_ha, pm8001_printk( + "OPC_OUB_PHY_START_RESP opcode:%x\n", opc)); + mpi_phy_start_resp(pm8001_ha, piomb); + break; + case OPC_OUB_PHY_STOP_RESP: + PM8001_MSG_DBG(pm8001_ha, pm8001_printk( + "OPC_OUB_PHY_STOP_RESP opcode:%x\n", opc)); + mpi_phy_stop_resp(pm8001_ha, piomb); + break; + case OPC_OUB_SET_CONTROLLER_CONFIG: + PM8001_MSG_DBG(pm8001_ha, pm8001_printk( + "OPC_OUB_SET_CONTROLLER_CONFIG opcode:%x\n", opc)); + mpi_set_controller_config_resp(pm8001_ha, piomb); + break; + case OPC_OUB_GET_CONTROLLER_CONFIG: + PM8001_MSG_DBG(pm8001_ha, pm8001_printk( + "OPC_OUB_GET_CONTROLLER_CONFIG opcode:%x\n", opc)); + mpi_get_controller_config_resp(pm8001_ha, piomb); + break; + case OPC_OUB_GET_PHY_PROFILE: + PM8001_MSG_DBG(pm8001_ha, pm8001_printk( + "OPC_OUB_GET_PHY_PROFILE opcode:%x\n", opc)); + mpi_get_phy_profile_resp(pm8001_ha, piomb); + break; + case OPC_OUB_FLASH_OP_EXT: + PM8001_MSG_DBG(pm8001_ha, pm8001_printk( + "OPC_OUB_FLASH_OP_EXT opcode:%x\n", opc)); + mpi_flash_op_ext_resp(pm8001_ha, piomb); + break; + case OPC_OUB_SET_PHY_PROFILE: + PM8001_MSG_DBG(pm8001_ha, pm8001_printk( + "OPC_OUB_SET_PHY_PROFILE opcode:%x\n", opc)); + mpi_set_phy_profile_resp(pm8001_ha, piomb); + break; + case OPC_OUB_KEK_MANAGEMENT_RESP: + PM8001_MSG_DBG(pm8001_ha, pm8001_printk( + "OPC_OUB_KEK_MANAGEMENT_RESP opcode:%x\n", opc)); + mpi_kek_management_resp(pm8001_ha, piomb); + break; + case OPC_OUB_DEK_MANAGEMENT_RESP: + PM8001_MSG_DBG(pm8001_ha, pm8001_printk( + "OPC_OUB_DEK_MANAGEMENT_RESP opcode:%x\n", opc)); + mpi_dek_management_resp(pm8001_ha, piomb); + break; + case OPC_OUB_SSP_COALESCED_COMP_RESP: + PM8001_MSG_DBG(pm8001_ha, pm8001_printk( + "OPC_OUB_SSP_COALESCED_COMP_RESP opcode:%x\n", opc)); + ssp_coalesced_comp_resp(pm8001_ha, piomb); + break; + default: + PM8001_MSG_DBG(pm8001_ha, pm8001_printk( + "Unknown outbound Queue IOMB OPC = 0x%x\n", opc)); + break; + } +} + +static int process_oq(struct pm8001_hba_info *pm8001_ha, u8 vec) +{ + struct outbound_queue_table *circularQ; + void *pMsg1 = NULL; + u8 uninitialized_var(bc); + u32 ret = MPI_IO_STATUS_FAIL; + unsigned long flags; + + spin_lock_irqsave(&pm8001_ha->lock, flags); + circularQ = &pm8001_ha->outbnd_q_tbl[vec]; + do { + ret = pm8001_mpi_msg_consume(pm8001_ha, circularQ, &pMsg1, &bc); + if (MPI_IO_STATUS_SUCCESS == ret) { + /* process the outbound message */ + process_one_iomb(pm8001_ha, (void *)(pMsg1 - 4)); + /* free the message from the outbound circular buffer */ + pm8001_mpi_msg_free_set(pm8001_ha, pMsg1, + circularQ, bc); + } + if (MPI_IO_STATUS_BUSY == ret) { + /* Update the producer index from SPC */ + circularQ->producer_index = + cpu_to_le32(pm8001_read_32(circularQ->pi_virt)); + if (le32_to_cpu(circularQ->producer_index) == + circularQ->consumer_idx) + /* OQ is empty */ + break; + } + } while (1); + spin_unlock_irqrestore(&pm8001_ha->lock, flags); + return ret; +} + +/* PCI_DMA_... to our direction translation. */ +static const u8 data_dir_flags[] = { + [PCI_DMA_BIDIRECTIONAL] = DATA_DIR_BYRECIPIENT,/* UNSPECIFIED */ + [PCI_DMA_TODEVICE] = DATA_DIR_OUT,/* OUTBOUND */ + [PCI_DMA_FROMDEVICE] = DATA_DIR_IN,/* INBOUND */ + [PCI_DMA_NONE] = DATA_DIR_NONE,/* NO TRANSFER */ +}; + +static void build_smp_cmd(u32 deviceID, __le32 hTag, + struct smp_req *psmp_cmd, int mode, int length) +{ + psmp_cmd->tag = hTag; + psmp_cmd->device_id = cpu_to_le32(deviceID); + if (mode == SMP_DIRECT) { + length = length - 4; /* subtract crc */ + psmp_cmd->len_ip_ir = cpu_to_le32(length << 16); + } else { + psmp_cmd->len_ip_ir = cpu_to_le32(1|(1 << 1)); + } +} + +/** + * pm8001_chip_smp_req - send a SMP task to FW + * @pm8001_ha: our hba card information. + * @ccb: the ccb information this request used. + */ +static int pm80xx_chip_smp_req(struct pm8001_hba_info *pm8001_ha, + struct pm8001_ccb_info *ccb) +{ + int elem, rc; + struct sas_task *task = ccb->task; + struct domain_device *dev = task->dev; + struct pm8001_device *pm8001_dev = dev->lldd_dev; + struct scatterlist *sg_req, *sg_resp; + u32 req_len, resp_len; + struct smp_req smp_cmd; + u32 opc; + struct inbound_queue_table *circularQ; + char *preq_dma_addr = NULL; + __le64 tmp_addr; + u32 i, length; + + memset(&smp_cmd, 0, sizeof(smp_cmd)); + /* + * DMA-map SMP request, response buffers + */ + sg_req = &task->smp_task.smp_req; + elem = dma_map_sg(pm8001_ha->dev, sg_req, 1, PCI_DMA_TODEVICE); + if (!elem) + return -ENOMEM; + req_len = sg_dma_len(sg_req); + + sg_resp = &task->smp_task.smp_resp; + elem = dma_map_sg(pm8001_ha->dev, sg_resp, 1, PCI_DMA_FROMDEVICE); + if (!elem) { + rc = -ENOMEM; + goto err_out; + } + resp_len = sg_dma_len(sg_resp); + /* must be in dwords */ + if ((req_len & 0x3) || (resp_len & 0x3)) { + rc = -EINVAL; + goto err_out_2; + } + + opc = OPC_INB_SMP_REQUEST; + circularQ = &pm8001_ha->inbnd_q_tbl[0]; + smp_cmd.tag = cpu_to_le32(ccb->ccb_tag); + + length = sg_req->length; + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("SMP Frame Length %d\n", sg_req->length)); + if (!(length - 8)) + pm8001_ha->smp_exp_mode = SMP_DIRECT; + else + pm8001_ha->smp_exp_mode = SMP_INDIRECT; + + /* DIRECT MODE support only in spcv/ve */ + pm8001_ha->smp_exp_mode = SMP_DIRECT; + + tmp_addr = cpu_to_le64((u64)sg_dma_address(&task->smp_task.smp_req)); + preq_dma_addr = (char *)phys_to_virt(tmp_addr); + + /* INDIRECT MODE command settings. Use DMA */ + if (pm8001_ha->smp_exp_mode == SMP_INDIRECT) { + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("SMP REQUEST INDIRECT MODE\n")); + /* for SPCv indirect mode. Place the top 4 bytes of + * SMP Request header here. */ + for (i = 0; i < 4; i++) + smp_cmd.smp_req16[i] = *(preq_dma_addr + i); + /* exclude top 4 bytes for SMP req header */ + smp_cmd.long_smp_req.long_req_addr = + cpu_to_le64((u64)sg_dma_address + (&task->smp_task.smp_req) - 4); + /* exclude 4 bytes for SMP req header and CRC */ + smp_cmd.long_smp_req.long_req_size = + cpu_to_le32((u32)sg_dma_len(&task->smp_task.smp_req)-8); + smp_cmd.long_smp_req.long_resp_addr = + cpu_to_le64((u64)sg_dma_address + (&task->smp_task.smp_resp)); + smp_cmd.long_smp_req.long_resp_size = + cpu_to_le32((u32)sg_dma_len + (&task->smp_task.smp_resp)-4); + } else { /* DIRECT MODE */ + smp_cmd.long_smp_req.long_req_addr = + cpu_to_le64((u64)sg_dma_address + (&task->smp_task.smp_req)); + smp_cmd.long_smp_req.long_req_size = + cpu_to_le32((u32)sg_dma_len(&task->smp_task.smp_req)-4); + smp_cmd.long_smp_req.long_resp_addr = + cpu_to_le64((u64)sg_dma_address + (&task->smp_task.smp_resp)); + smp_cmd.long_smp_req.long_resp_size = + cpu_to_le32 + ((u32)sg_dma_len(&task->smp_task.smp_resp)-4); + } + if (pm8001_ha->smp_exp_mode == SMP_DIRECT) { + PM8001_IO_DBG(pm8001_ha, + pm8001_printk("SMP REQUEST DIRECT MODE\n")); + for (i = 0; i < length; i++) + if (i < 16) { + smp_cmd.smp_req16[i] = *(preq_dma_addr+i); + PM8001_IO_DBG(pm8001_ha, pm8001_printk( + "Byte[%d]:%x (DMA data:%x)\n", + i, smp_cmd.smp_req16[i], + *(preq_dma_addr))); + } else { + smp_cmd.smp_req[i] = *(preq_dma_addr+i); + PM8001_IO_DBG(pm8001_ha, pm8001_printk( + "Byte[%d]:%x (DMA data:%x)\n", + i, smp_cmd.smp_req[i], + *(preq_dma_addr))); + } + } + + build_smp_cmd(pm8001_dev->device_id, smp_cmd.tag, + &smp_cmd, pm8001_ha->smp_exp_mode, length); + pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, (u32 *)&smp_cmd, 0); + return 0; + +err_out_2: + dma_unmap_sg(pm8001_ha->dev, &ccb->task->smp_task.smp_resp, 1, + PCI_DMA_FROMDEVICE); +err_out: + dma_unmap_sg(pm8001_ha->dev, &ccb->task->smp_task.smp_req, 1, + PCI_DMA_TODEVICE); + return rc; +} + +static int check_enc_sas_cmd(struct sas_task *task) +{ + if ((task->ssp_task.cdb[0] == READ_10) + || (task->ssp_task.cdb[0] == WRITE_10) + || (task->ssp_task.cdb[0] == WRITE_VERIFY)) + return 1; + else + return 0; +} + +static int check_enc_sat_cmd(struct sas_task *task) +{ + int ret = 0; + switch (task->ata_task.fis.command) { + case ATA_CMD_FPDMA_READ: + case ATA_CMD_READ_EXT: + case ATA_CMD_READ: + case ATA_CMD_FPDMA_WRITE: + case ATA_CMD_WRITE_EXT: + case ATA_CMD_WRITE: + case ATA_CMD_PIO_READ: + case ATA_CMD_PIO_READ_EXT: + case ATA_CMD_PIO_WRITE: + case ATA_CMD_PIO_WRITE_EXT: + ret = 1; + break; + default: + ret = 0; + break; + } + return ret; +} + +/** + * pm80xx_chip_ssp_io_req - send a SSP task to FW + * @pm8001_ha: our hba card information. + * @ccb: the ccb information this request used. + */ +static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha, + struct pm8001_ccb_info *ccb) +{ + struct sas_task *task = ccb->task; + struct domain_device *dev = task->dev; + struct pm8001_device *pm8001_dev = dev->lldd_dev; + struct ssp_ini_io_start_req ssp_cmd; + u32 tag = ccb->ccb_tag; + int ret; + u64 phys_addr; + struct inbound_queue_table *circularQ; + static u32 inb; + static u32 outb; + u32 opc = OPC_INB_SSPINIIOSTART; + memset(&ssp_cmd, 0, sizeof(ssp_cmd)); + memcpy(ssp_cmd.ssp_iu.lun, task->ssp_task.LUN, 8); + /* data address domain added for spcv; set to 0 by host, + * used internally by controller + * 0 for SAS 1.1 and SAS 2.0 compatible TLR + */ + ssp_cmd.dad_dir_m_tlr = + cpu_to_le32(data_dir_flags[task->data_dir] << 8 | 0x0); + ssp_cmd.data_len = cpu_to_le32(task->total_xfer_len); + ssp_cmd.device_id = cpu_to_le32(pm8001_dev->device_id); + ssp_cmd.tag = cpu_to_le32(tag); + if (task->ssp_task.enable_first_burst) + ssp_cmd.ssp_iu.efb_prio_attr |= 0x80; + ssp_cmd.ssp_iu.efb_prio_attr |= (task->ssp_task.task_prio << 3); + ssp_cmd.ssp_iu.efb_prio_attr |= (task->ssp_task.task_attr & 7); + memcpy(ssp_cmd.ssp_iu.cdb, task->ssp_task.cdb, 16); + circularQ = &pm8001_ha->inbnd_q_tbl[inb++]; + + /* rotate the inb queue */ + inb = inb%PM8001_MAX_SPCV_INB_NUM; + + /* Check if encryption is set */ + if (pm8001_ha->chip->encrypt && + !(pm8001_ha->encrypt_info.status) && check_enc_sas_cmd(task)) { + PM8001_IO_DBG(pm8001_ha, pm8001_printk( + "Encryption enabled.Sending Encrypt SAS command 0x%x\n", + task->ssp_task.cdb[0])); + opc = OPC_INB_SSP_INI_DIF_ENC_IO; + /* enable encryption. 0 for SAS 1.1 and SAS 2.0 compatible TLR*/ + ssp_cmd.dad_dir_m_tlr = cpu_to_le32 + ((data_dir_flags[task->data_dir] << 8) | 0x20 | 0x0); + + /* fill in PRD (scatter/gather) table, if any */ + if (task->num_scatter > 1) { + pm8001_chip_make_sg(task->scatter, + ccb->n_elem, ccb->buf_prd); + phys_addr = ccb->ccb_dma_handle + + offsetof(struct pm8001_ccb_info, buf_prd[0]); + ssp_cmd.enc_addr_low = + cpu_to_le32(lower_32_bits(phys_addr)); + ssp_cmd.enc_addr_high = + cpu_to_le32(upper_32_bits(phys_addr)); + ssp_cmd.enc_esgl = cpu_to_le32(1<<31); + } else if (task->num_scatter == 1) { + u64 dma_addr = sg_dma_address(task->scatter); + ssp_cmd.enc_addr_low = + cpu_to_le32(lower_32_bits(dma_addr)); + ssp_cmd.enc_addr_high = + cpu_to_le32(upper_32_bits(dma_addr)); + ssp_cmd.enc_len = cpu_to_le32(task->total_xfer_len); + ssp_cmd.enc_esgl = 0; + } else if (task->num_scatter == 0) { + ssp_cmd.enc_addr_low = 0; + ssp_cmd.enc_addr_high = 0; + ssp_cmd.enc_len = cpu_to_le32(task->total_xfer_len); + ssp_cmd.enc_esgl = 0; + } + /* XTS mode. All other fields are 0 */ + ssp_cmd.key_cmode = 0x6 << 4; + /* set tweak values. Should be the start lba */ + ssp_cmd.twk_val0 = cpu_to_le32((task->ssp_task.cdb[2] << 24) | + (task->ssp_task.cdb[3] << 16) | + (task->ssp_task.cdb[4] << 8) | + (task->ssp_task.cdb[5])); + } else { + PM8001_IO_DBG(pm8001_ha, pm8001_printk( + "Sending Normal SAS command 0x%x inb q %x\n", + task->ssp_task.cdb[0], inb)); + /* fill in PRD (scatter/gather) table, if any */ + if (task->num_scatter > 1) { + pm8001_chip_make_sg(task->scatter, ccb->n_elem, + ccb->buf_prd); + phys_addr = ccb->ccb_dma_handle + + offsetof(struct pm8001_ccb_info, buf_prd[0]); + ssp_cmd.addr_low = + cpu_to_le32(lower_32_bits(phys_addr)); + ssp_cmd.addr_high = + cpu_to_le32(upper_32_bits(phys_addr)); + ssp_cmd.esgl = cpu_to_le32(1<<31); + } else if (task->num_scatter == 1) { + u64 dma_addr = sg_dma_address(task->scatter); + ssp_cmd.addr_low = cpu_to_le32(lower_32_bits(dma_addr)); + ssp_cmd.addr_high = + cpu_to_le32(upper_32_bits(dma_addr)); + ssp_cmd.len = cpu_to_le32(task->total_xfer_len); + ssp_cmd.esgl = 0; + } else if (task->num_scatter == 0) { + ssp_cmd.addr_low = 0; + ssp_cmd.addr_high = 0; + ssp_cmd.len = cpu_to_le32(task->total_xfer_len); + ssp_cmd.esgl = 0; + } + } + ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &ssp_cmd, outb++); + + /* rotate the outb queue */ + outb = outb%PM8001_MAX_SPCV_OUTB_NUM; + + return ret; +} + +static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha, + struct pm8001_ccb_info *ccb) +{ + struct sas_task *task = ccb->task; + struct domain_device *dev = task->dev; + struct pm8001_device *pm8001_ha_dev = dev->lldd_dev; + u32 tag = ccb->ccb_tag; + int ret; + static u32 inb; + static u32 outb; + struct sata_start_req sata_cmd; + u32 hdr_tag, ncg_tag = 0; + u64 phys_addr; + u32 ATAP = 0x0; + u32 dir; + struct inbound_queue_table *circularQ; + u32 opc = OPC_INB_SATA_HOST_OPSTART; + memset(&sata_cmd, 0, sizeof(sata_cmd)); + circularQ = &pm8001_ha->inbnd_q_tbl[inb++]; + + /* rotate the inb queue */ + inb = inb%PM8001_MAX_SPCV_INB_NUM; + + if (task->data_dir == PCI_DMA_NONE) { + ATAP = 0x04; /* no data*/ + PM8001_IO_DBG(pm8001_ha, pm8001_printk("no data\n")); + } else if (likely(!task->ata_task.device_control_reg_update)) { + if (task->ata_task.dma_xfer) { + ATAP = 0x06; /* DMA */ + PM8001_IO_DBG(pm8001_ha, pm8001_printk("DMA\n")); + } else { + ATAP = 0x05; /* PIO*/ + PM8001_IO_DBG(pm8001_ha, pm8001_printk("PIO\n")); + } + if (task->ata_task.use_ncq && + dev->sata_dev.command_set != ATAPI_COMMAND_SET) { + ATAP = 0x07; /* FPDMA */ + PM8001_IO_DBG(pm8001_ha, pm8001_printk("FPDMA\n")); + } + } + if (task->ata_task.use_ncq && pm8001_get_ncq_tag(task, &hdr_tag)) + ncg_tag = hdr_tag; + dir = data_dir_flags[task->data_dir] << 8; + sata_cmd.tag = cpu_to_le32(tag); + sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id); + sata_cmd.data_len = cpu_to_le32(task->total_xfer_len); + + sata_cmd.sata_fis = task->ata_task.fis; + if (likely(!task->ata_task.device_control_reg_update)) + sata_cmd.sata_fis.flags |= 0x80;/* C=1: update ATA cmd reg */ + sata_cmd.sata_fis.flags &= 0xF0;/* PM_PORT field shall be 0 */ + + /* Check if encryption is set */ + if (pm8001_ha->chip->encrypt && + !(pm8001_ha->encrypt_info.status) && check_enc_sat_cmd(task)) { + PM8001_IO_DBG(pm8001_ha, pm8001_printk( + "Encryption enabled.Sending Encrypt SATA cmd 0x%x\n", + sata_cmd.sata_fis.command)); + opc = OPC_INB_SATA_DIF_ENC_IO; + + /* set encryption bit */ + sata_cmd.ncqtag_atap_dir_m_dad = + cpu_to_le32(((ncg_tag & 0xff)<<16)| + ((ATAP & 0x3f) << 10) | 0x20 | dir); + /* dad (bit 0-1) is 0 */ + /* fill in PRD (scatter/gather) table, if any */ + if (task->num_scatter > 1) { + pm8001_chip_make_sg(task->scatter, + ccb->n_elem, ccb->buf_prd); + phys_addr = ccb->ccb_dma_handle + + offsetof(struct pm8001_ccb_info, buf_prd[0]); + sata_cmd.enc_addr_low = lower_32_bits(phys_addr); + sata_cmd.enc_addr_high = upper_32_bits(phys_addr); + sata_cmd.enc_esgl = cpu_to_le32(1 << 31); + } else if (task->num_scatter == 1) { + u64 dma_addr = sg_dma_address(task->scatter); + sata_cmd.enc_addr_low = lower_32_bits(dma_addr); + sata_cmd.enc_addr_high = upper_32_bits(dma_addr); + sata_cmd.enc_len = cpu_to_le32(task->total_xfer_len); + sata_cmd.enc_esgl = 0; + } else if (task->num_scatter == 0) { + sata_cmd.enc_addr_low = 0; + sata_cmd.enc_addr_high = 0; + sata_cmd.enc_len = cpu_to_le32(task->total_xfer_len); + sata_cmd.enc_esgl = 0; + } + /* XTS mode. All other fields are 0 */ + sata_cmd.key_index_mode = 0x6 << 4; + /* set tweak values. Should be the start lba */ + sata_cmd.twk_val0 = + cpu_to_le32((sata_cmd.sata_fis.lbal_exp << 24) | + (sata_cmd.sata_fis.lbah << 16) | + (sata_cmd.sata_fis.lbam << 8) | + (sata_cmd.sata_fis.lbal)); + sata_cmd.twk_val1 = + cpu_to_le32((sata_cmd.sata_fis.lbah_exp << 8) | + (sata_cmd.sata_fis.lbam_exp)); + } else { + PM8001_IO_DBG(pm8001_ha, pm8001_printk( + "Sending Normal SATA command 0x%x inb %x\n", + sata_cmd.sata_fis.command, inb)); + /* dad (bit 0-1) is 0 */ + sata_cmd.ncqtag_atap_dir_m_dad = + cpu_to_le32(((ncg_tag & 0xff)<<16) | + ((ATAP & 0x3f) << 10) | dir); + + /* fill in PRD (scatter/gather) table, if any */ + if (task->num_scatter > 1) { + pm8001_chip_make_sg(task->scatter, + ccb->n_elem, ccb->buf_prd); + phys_addr = ccb->ccb_dma_handle + + offsetof(struct pm8001_ccb_info, buf_prd[0]); + sata_cmd.addr_low = lower_32_bits(phys_addr); + sata_cmd.addr_high = upper_32_bits(phys_addr); + sata_cmd.esgl = cpu_to_le32(1 << 31); + } else if (task->num_scatter == 1) { + u64 dma_addr = sg_dma_address(task->scatter); + sata_cmd.addr_low = lower_32_bits(dma_addr); + sata_cmd.addr_high = upper_32_bits(dma_addr); + sata_cmd.len = cpu_to_le32(task->total_xfer_len); + sata_cmd.esgl = 0; + } else if (task->num_scatter == 0) { + sata_cmd.addr_low = 0; + sata_cmd.addr_high = 0; + sata_cmd.len = cpu_to_le32(task->total_xfer_len); + sata_cmd.esgl = 0; + } + /* scsi cdb */ + sata_cmd.atapi_scsi_cdb[0] = + cpu_to_le32(((task->ata_task.atapi_packet[0]) | + (task->ata_task.atapi_packet[1] << 8) | + (task->ata_task.atapi_packet[2] << 16) | + (task->ata_task.atapi_packet[3] << 24))); + sata_cmd.atapi_scsi_cdb[1] = + cpu_to_le32(((task->ata_task.atapi_packet[4]) | + (task->ata_task.atapi_packet[5] << 8) | + (task->ata_task.atapi_packet[6] << 16) | + (task->ata_task.atapi_packet[7] << 24))); + sata_cmd.atapi_scsi_cdb[2] = + cpu_to_le32(((task->ata_task.atapi_packet[8]) | + (task->ata_task.atapi_packet[9] << 8) | + (task->ata_task.atapi_packet[10] << 16) | + (task->ata_task.atapi_packet[11] << 24))); + sata_cmd.atapi_scsi_cdb[3] = + cpu_to_le32(((task->ata_task.atapi_packet[12]) | + (task->ata_task.atapi_packet[13] << 8) | + (task->ata_task.atapi_packet[14] << 16) | + (task->ata_task.atapi_packet[15] << 24))); + } + ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, + &sata_cmd, outb++); + + /* rotate the outb queue */ + outb = outb%PM8001_MAX_SPCV_OUTB_NUM; + return ret; +} + +/** + * pm80xx_chip_phy_start_req - start phy via PHY_START COMMAND + * @pm8001_ha: our hba card information. + * @num: the inbound queue number + * @phy_id: the phy id which we wanted to start up. + */ +static int +pm80xx_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id) +{ + struct phy_start_req payload; + struct inbound_queue_table *circularQ; + int ret; + u32 tag = 0x01; + u32 opcode = OPC_INB_PHYSTART; + circularQ = &pm8001_ha->inbnd_q_tbl[0]; + memset(&payload, 0, sizeof(payload)); + payload.tag = cpu_to_le32(tag); + + PM8001_INIT_DBG(pm8001_ha, + pm8001_printk("PHY START REQ for phy_id %d\n", phy_id)); + /* + ** [0:7] PHY Identifier + ** [8:11] link rate 1.5G, 3G, 6G + ** [12:13] link mode 01b SAS mode; 10b SATA mode; 11b Auto mode + ** [14] 0b disable spin up hold; 1b enable spin up hold + ** [15] ob no change in current PHY analig setup 1b enable using SPAST + */ + payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE | + LINKMODE_AUTO | LINKRATE_15 | + LINKRATE_30 | LINKRATE_60 | phy_id); + /* SSC Disable and SAS Analog ST configuration */ + /** + payload.ase_sh_lm_slr_phyid = + cpu_to_le32(SSC_DISABLE_30 | SAS_ASE | SPINHOLD_DISABLE | + LINKMODE_AUTO | LINKRATE_15 | LINKRATE_30 | LINKRATE_60 | + phy_id); + Have to add "SAS PHY Analog Setup SPASTI 1 Byte" Based on need + **/ + + payload.sas_identify.dev_type = SAS_END_DEV; + payload.sas_identify.initiator_bits = SAS_PROTOCOL_ALL; + memcpy(payload.sas_identify.sas_addr, + pm8001_ha->sas_addr, SAS_ADDR_SIZE); + payload.sas_identify.phy_id = phy_id; + ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opcode, &payload, 0); + return ret; +} + +/** + * pm8001_chip_phy_stop_req - start phy via PHY_STOP COMMAND + * @pm8001_ha: our hba card information. + * @num: the inbound queue number + * @phy_id: the phy id which we wanted to start up. + */ +static int pm80xx_chip_phy_stop_req(struct pm8001_hba_info *pm8001_ha, + u8 phy_id) +{ + struct phy_stop_req payload; + struct inbound_queue_table *circularQ; + int ret; + u32 tag = 0x01; + u32 opcode = OPC_INB_PHYSTOP; + circularQ = &pm8001_ha->inbnd_q_tbl[0]; + memset(&payload, 0, sizeof(payload)); + payload.tag = cpu_to_le32(tag); + payload.phy_id = cpu_to_le32(phy_id); + ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opcode, &payload, 0); + return ret; +} + +/** + * see comments on pm8001_mpi_reg_resp. + */ +static int pm80xx_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha, + struct pm8001_device *pm8001_dev, u32 flag) +{ + struct reg_dev_req payload; + u32 opc; + u32 stp_sspsmp_sata = 0x4; + struct inbound_queue_table *circularQ; + u32 linkrate, phy_id; + int rc, tag = 0xdeadbeef; + struct pm8001_ccb_info *ccb; + u8 retryFlag = 0x1; + u16 firstBurstSize = 0; + u16 ITNT = 2000; + struct domain_device *dev = pm8001_dev->sas_device; + struct domain_device *parent_dev = dev->parent; + circularQ = &pm8001_ha->inbnd_q_tbl[0]; + + memset(&payload, 0, sizeof(payload)); + rc = pm8001_tag_alloc(pm8001_ha, &tag); + if (rc) + return rc; + ccb = &pm8001_ha->ccb_info[tag]; + ccb->device = pm8001_dev; + ccb->ccb_tag = tag; + payload.tag = cpu_to_le32(tag); + + if (flag == 1) { + stp_sspsmp_sata = 0x02; /*direct attached sata */ + } else { + if (pm8001_dev->dev_type == SATA_DEV) + stp_sspsmp_sata = 0x00; /* stp*/ + else if (pm8001_dev->dev_type == SAS_END_DEV || + pm8001_dev->dev_type == EDGE_DEV || + pm8001_dev->dev_type == FANOUT_DEV) + stp_sspsmp_sata = 0x01; /*ssp or smp*/ + } + if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) + phy_id = parent_dev->ex_dev.ex_phy->phy_id; + else + phy_id = pm8001_dev->attached_phy; + + opc = OPC_INB_REG_DEV; + + linkrate = (pm8001_dev->sas_device->linkrate < dev->port->linkrate) ? + pm8001_dev->sas_device->linkrate : dev->port->linkrate; + + payload.phyid_portid = + cpu_to_le32(((pm8001_dev->sas_device->port->id) & 0xFF) | + ((phy_id & 0xFF) << 8)); + + payload.dtype_dlr_mcn_ir_retry = cpu_to_le32((retryFlag & 0x01) | + ((linkrate & 0x0F) << 24) | + ((stp_sspsmp_sata & 0x03) << 28)); + payload.firstburstsize_ITNexustimeout = + cpu_to_le32(ITNT | (firstBurstSize * 0x10000)); + + memcpy(payload.sas_addr, pm8001_dev->sas_device->sas_addr, + SAS_ADDR_SIZE); + + rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0); + + return rc; +} + +/** + * pm80xx_chip_phy_ctl_req - support the local phy operation + * @pm8001_ha: our hba card information. + * @num: the inbound queue number + * @phy_id: the phy id which we wanted to operate + * @phy_op: + */ +static int pm80xx_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha, + u32 phyId, u32 phy_op) +{ + struct local_phy_ctl_req payload; + struct inbound_queue_table *circularQ; + int ret; + u32 opc = OPC_INB_LOCAL_PHY_CONTROL; + memset(&payload, 0, sizeof(payload)); + circularQ = &pm8001_ha->inbnd_q_tbl[0]; + payload.tag = cpu_to_le32(1); + payload.phyop_phyid = + cpu_to_le32(((phy_op & 0xFF) << 8) | (phyId & 0xFF)); + ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0); + return ret; +} + +static u32 pm80xx_chip_is_our_interupt(struct pm8001_hba_info *pm8001_ha) +{ + u32 value; +#ifdef PM8001_USE_MSIX + return 1; +#endif + value = pm8001_cr32(pm8001_ha, 0, MSGU_ODR); + if (value) + return 1; + return 0; + +} + +/** + * pm8001_chip_isr - PM8001 isr handler. + * @pm8001_ha: our hba card information. + * @irq: irq number. + * @stat: stat. + */ +static irqreturn_t +pm80xx_chip_isr(struct pm8001_hba_info *pm8001_ha, u8 vec) +{ + pm80xx_chip_interrupt_disable(pm8001_ha, vec); + process_oq(pm8001_ha, vec); + pm80xx_chip_interrupt_enable(pm8001_ha, vec); + return IRQ_HANDLED; +} + +const struct pm8001_dispatch pm8001_80xx_dispatch = { + .name = "pmc80xx", + .chip_init = pm80xx_chip_init, + .chip_soft_rst = pm80xx_chip_soft_rst, + .chip_rst = pm80xx_hw_chip_rst, + .chip_iounmap = pm8001_chip_iounmap, + .isr = pm80xx_chip_isr, + .is_our_interupt = pm80xx_chip_is_our_interupt, + .isr_process_oq = process_oq, + .interrupt_enable = pm80xx_chip_interrupt_enable, + .interrupt_disable = pm80xx_chip_interrupt_disable, + .make_prd = pm8001_chip_make_sg, + .smp_req = pm80xx_chip_smp_req, + .ssp_io_req = pm80xx_chip_ssp_io_req, + .sata_req = pm80xx_chip_sata_req, + .phy_start_req = pm80xx_chip_phy_start_req, + .phy_stop_req = pm80xx_chip_phy_stop_req, + .reg_dev_req = pm80xx_chip_reg_dev_req, + .dereg_dev_req = pm8001_chip_dereg_dev_req, + .phy_ctl_req = pm80xx_chip_phy_ctl_req, + .task_abort = pm8001_chip_abort_task, + .ssp_tm_req = pm8001_chip_ssp_tm_req, + .get_nvmd_req = pm8001_chip_get_nvmd_req, + .set_nvmd_req = pm8001_chip_set_nvmd_req, + .fw_flash_update_req = pm8001_chip_fw_flash_update_req, + .set_dev_state_req = pm8001_chip_set_dev_state_req, +}; |