Drivers: scsi: remove __dev* attributes.

CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Adam Radford <linuxraid@lsi.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2 files changed, 29 insertions, 35 deletions

diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index bf54aafc2d7..b8dd05074ab 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -47,7 +47,7 @@
  * read_main_config_table - read the configure table and save it.
  * @pm8001_ha: our hba card information
  */
-static void __devinit read_main_config_table(struct pm8001_hba_info *pm8001_ha)
+static void read_main_config_table(struct pm8001_hba_info *pm8001_ha)
 {
 	void __iomem *address = pm8001_ha->main_cfg_tbl_addr;
 	pm8001_ha->main_cfg_tbl.signature	= pm8001_mr32(address, 0x00);
@@ -83,8 +83,7 @@ static void __devinit read_main_config_table(struct pm8001_hba_info *pm8001_ha)
  * read_general_status_table - read the general status table and save it.
  * @pm8001_ha: our hba card information
  */
-static void __devinit
-read_general_status_table(struct pm8001_hba_info *pm8001_ha)
+static void read_general_status_table(struct pm8001_hba_info *pm8001_ha)
 {
 	void __iomem *address = pm8001_ha->general_stat_tbl_addr;
 	pm8001_ha->gs_tbl.gst_len_mpistate	= pm8001_mr32(address, 0x00);
@@ -118,8 +117,7 @@ read_general_status_table(struct pm8001_hba_info *pm8001_ha)
  * read_inbnd_queue_table - read the inbound queue table and save it.
  * @pm8001_ha: our hba card information
  */
-static void __devinit
-read_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
+static void read_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
 {
 	int inbQ_num = 1;
 	int i;
@@ -137,8 +135,7 @@ read_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
  * read_outbnd_queue_table - read the outbound queue table and save it.
  * @pm8001_ha: our hba card information
  */
-static void __devinit
-read_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
+static void read_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
 {
 	int outbQ_num = 1;
 	int i;
@@ -156,8 +153,7 @@ read_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
  * init_default_table_values - init the default table.
  * @pm8001_ha: our hba card information
  */
-static void __devinit
-init_default_table_values(struct pm8001_hba_info *pm8001_ha)
+static void init_default_table_values(struct pm8001_hba_info *pm8001_ha)
 {
 	int qn = 1;
 	int i;
@@ -250,8 +246,7 @@ init_default_table_values(struct pm8001_hba_info *pm8001_ha)
  * update_main_config_table - update the main default table to the HBA.
  * @pm8001_ha: our hba card information
  */
-static void __devinit
-update_main_config_table(struct pm8001_hba_info *pm8001_ha)
+static void update_main_config_table(struct pm8001_hba_info *pm8001_ha)
 {
 	void __iomem *address = pm8001_ha->main_cfg_tbl_addr;
 	pm8001_mw32(address, 0x24,
@@ -297,8 +292,8 @@ update_main_config_table(struct pm8001_hba_info *pm8001_ha)
  * update_inbnd_queue_table - update the inbound queue table to the HBA.
  * @pm8001_ha: our hba card information
  */
-static void __devinit
-update_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha, int number)
+static void update_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha,
+				     int number)
 {
 	void __iomem *address = pm8001_ha->inbnd_q_tbl_addr;
 	u16 offset = number * 0x20;
@@ -318,8 +313,8 @@ update_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha, int number)
  * update_outbnd_queue_table - update the outbound queue table to the HBA.
  * @pm8001_ha: our hba card information
  */
-static void __devinit
-update_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha, int number)
+static void update_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha,
+				      int number)
 {
 	void __iomem *address = pm8001_ha->outbnd_q_tbl_addr;
 	u16 offset = number * 0x24;
@@ -370,8 +365,8 @@ int pm8001_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue)
  * @pm8001_ha: our hba card information
  * @SSCbit: set SSCbit to 0 to disable all phys ssc; 1 to enable all phys ssc.
  */
-static void __devinit
-mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha, u32 SSCbit)
+static void mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha,
+				     u32 SSCbit)
 {
 	u32 value, offset, i;
 	unsigned long flags;
@@ -438,9 +433,8 @@ mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha, u32 SSCbit)
  * @pm8001_ha: our hba card information
  * @interval - interval time for each OPEN_REJECT (RETRY). The units are in 1us.
  */
-static void __devinit
-mpi_set_open_retry_interval_reg(struct pm8001_hba_info *pm8001_ha,
-				u32 interval)
+static void mpi_set_open_retry_interval_reg(struct pm8001_hba_info *pm8001_ha,
+					    u32 interval)
 {
 	u32 offset;
 	u32 value;
@@ -601,7 +595,7 @@ static void init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha)
  * pm8001_chip_init - the main init function that initialize whole PM8001 chip.
  * @pm8001_ha: our hba card information
  */
-static int __devinit pm8001_chip_init(struct pm8001_hba_info *pm8001_ha)
+static int pm8001_chip_init(struct pm8001_hba_info *pm8001_ha)
 {
 	/* check the firmware status */
 	if (-1 == check_fw_ready(pm8001_ha)) {
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index 0267c22f874..4c9fe733fe8 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -104,8 +104,7 @@ static struct sas_domain_function_template pm8001_transport_ops = {
  *@pm8001_ha: our hba structure.
  *@phy_id: phy id.
  */
-static void __devinit pm8001_phy_init(struct pm8001_hba_info *pm8001_ha,
-	int phy_id)
+static void pm8001_phy_init(struct pm8001_hba_info *pm8001_ha, int phy_id)
 {
 	struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
 	struct asd_sas_phy *sas_phy = &phy->sas_phy;
@@ -195,7 +194,7 @@ static irqreturn_t pm8001_interrupt(int irq, void *opaque)
  * @pm8001_ha:our hba structure.
  *
  */
-static int __devinit pm8001_alloc(struct pm8001_hba_info *pm8001_ha)
+static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha)
 {
 	int i;
 	spin_lock_init(&pm8001_ha->lock);
@@ -360,8 +359,9 @@ static int pm8001_ioremap(struct pm8001_hba_info *pm8001_ha)
  * @ent: ent
  * @shost: scsi host struct which has been initialized before.
  */
-static struct pm8001_hba_info *__devinit
-pm8001_pci_alloc(struct pci_dev *pdev, u32 chip_id, struct Scsi_Host *shost)
+static struct pm8001_hba_info *pm8001_pci_alloc(struct pci_dev *pdev,
+						u32 chip_id,
+						struct Scsi_Host *shost)
 {
 	struct pm8001_hba_info *pm8001_ha;
 	struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
@@ -433,8 +433,8 @@ static int pci_go_44(struct pci_dev *pdev)
  * @shost: scsi host which has been allocated outside.
  * @chip_info: our ha struct.
  */
-static int __devinit pm8001_prep_sas_ha_init(struct Scsi_Host * shost,
-	const struct pm8001_chip_info *chip_info)
+static int pm8001_prep_sas_ha_init(struct Scsi_Host *shost,
+				   const struct pm8001_chip_info *chip_info)
 {
 	int phy_nr, port_nr;
 	struct asd_sas_phy **arr_phy;
@@ -479,8 +479,8 @@ exit:
  * @shost: scsi host which has been allocated outside
  * @chip_info: our ha struct.
  */
-static void  __devinit pm8001_post_sas_ha_init(struct Scsi_Host *shost,
-	const struct pm8001_chip_info *chip_info)
+static void  pm8001_post_sas_ha_init(struct Scsi_Host *shost,
+				     const struct pm8001_chip_info *chip_info)
 {
 	int i = 0;
 	struct pm8001_hba_info *pm8001_ha;
@@ -615,8 +615,8 @@ intx:
  * pci driver it is invoked, all struct an hardware initilization should be done
  * here, also, register interrupt
  */
-static int __devinit pm8001_pci_probe(struct pci_dev *pdev,
-	const struct pci_device_id *ent)
+static int pm8001_pci_probe(struct pci_dev *pdev,
+			    const struct pci_device_id *ent)
 {
 	unsigned int rc;
 	u32	pci_reg;
@@ -707,7 +707,7 @@ err_out_enable:
 	return rc;
 }
 
-static void __devexit pm8001_pci_remove(struct pci_dev *pdev)
+static void pm8001_pci_remove(struct pci_dev *pdev)
 {
 	struct sas_ha_struct *sha = pci_get_drvdata(pdev);
 	struct pm8001_hba_info *pm8001_ha;
@@ -842,7 +842,7 @@ err_out_enable:
 	return rc;
 }
 
-static struct pci_device_id __devinitdata pm8001_pci_table[] = {
+static struct pci_device_id pm8001_pci_table[] = {
 	{
 		PCI_VDEVICE(PMC_Sierra, 0x8001), chip_8001
 	},
@@ -857,7 +857,7 @@ static struct pci_driver pm8001_pci_driver = {
 	.name		= DRV_NAME,
 	.id_table	= pm8001_pci_table,
 	.probe		= pm8001_pci_probe,
-	.remove		= __devexit_p(pm8001_pci_remove),
+	.remove		= pm8001_pci_remove,
 	.suspend	= pm8001_pci_suspend,
 	.resume		= pm8001_pci_resume,
 };