[SCSI] qla2xxx: Add an "is reset active" helper.

Many locations within the driver would use an inconsistent set of
checks to determine ISP-reset state.  Consolidate the checks into
this inline-helper.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

1 files changed, 9 insertions, 41 deletions

diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c
index b1d0f936bf2..1682e2e4201 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -108,13 +108,6 @@ qla24xx_proc_fcp_prio_cfg_cmd(struct fc_bsg_job *bsg_job)
 		goto exit_fcp_prio_cfg;
 	}
 
-	if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
-		test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
-		test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
-		ret = -EBUSY;
-		goto exit_fcp_prio_cfg;
-	}
-
 	/* Get the sub command */
 	oper = bsg_job->request->rqst_data.h_vendor.vendor_cmd[1];
 
@@ -646,13 +639,6 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job)
 	dma_addr_t rsp_data_dma;
 	uint32_t rsp_data_len;
 
-	if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
-		test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
-		test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
-		ql_log(ql_log_warn, vha, 0x7018, "Abort active or needed.\n");
-		return -EBUSY;
-	}
-
 	if (!vha->flags.online) {
 		ql_log(ql_log_warn, vha, 0x7019, "Host is not online.\n");
 		return -EIO;
@@ -874,13 +860,6 @@ qla84xx_reset(struct fc_bsg_job *bsg_job)
 	int rval = 0;
 	uint32_t flag;
 
-	if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
-	    test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
-	    test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
-		ql_log(ql_log_warn, vha, 0x702e, "Abort active or needed.\n");
-		return -EBUSY;
-	}
-
 	if (!IS_QLA84XX(ha)) {
 		ql_dbg(ql_dbg_user, vha, 0x702f, "Not 84xx, exiting.\n");
 		return -EINVAL;
@@ -922,11 +901,6 @@ qla84xx_updatefw(struct fc_bsg_job *bsg_job)
 	uint32_t flag;
 	uint32_t fw_ver;
 
-	if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
-		test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
-		test_bit(ISP_ABORT_RETRY, &vha->dpc_flags))
-		return -EBUSY;
-
 	if (!IS_QLA84XX(ha)) {
 		ql_dbg(ql_dbg_user, vha, 0x7032,
 		    "Not 84xx, exiting.\n");
@@ -1036,14 +1010,6 @@ qla84xx_mgmt_cmd(struct fc_bsg_job *bsg_job)
 	uint32_t data_len = 0;
 	uint32_t dma_direction = DMA_NONE;
 
-	if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
-		test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
-		test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
-		ql_log(ql_log_warn, vha, 0x7039,
-		    "Abort active or needed.\n");
-		return -EBUSY;
-	}
-
 	if (!IS_QLA84XX(ha)) {
 		ql_log(ql_log_warn, vha, 0x703a,
 		    "Not 84xx, exiting.\n");
@@ -1246,13 +1212,6 @@ qla24xx_iidma(struct fc_bsg_job *bsg_job)
 
 	bsg_job->reply->reply_payload_rcv_len = 0;
 
-	if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
-		test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
-		test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
-		ql_log(ql_log_warn, vha, 0x7045, "abort active or needed.\n");
-		return -EBUSY;
-	}
-
 	if (!IS_IIDMA_CAPABLE(vha->hw)) {
 		ql_log(ql_log_info, vha, 0x7046, "iiDMA not supported.\n");
 		return -EINVAL;
@@ -1668,6 +1627,15 @@ qla24xx_bsg_request(struct fc_bsg_job *bsg_job)
 		vha = shost_priv(host);
 	}
 
+	if (qla2x00_reset_active(vha)) {
+		ql_dbg(ql_dbg_user, vha, 0x709f,
+		    "BSG: ISP abort active/needed -- cmd=%d.\n",
+		    bsg_job->request->msgcode);
+		bsg_job->reply->result = (DID_ERROR << 16);
+		bsg_job->job_done(bsg_job);
+		return -EBUSY;
+	}
+
 	ql_dbg(ql_dbg_user, vha, 0x7000,
 	    "Entered %s msgcode=0x%x.\n", __func__, bsg_job->request->msgcode);