Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (137 commits)
  [SCSI] iscsi: bidi support for iscsi_tcp
  [SCSI] iscsi: bidi support at the generic libiscsi level
  [SCSI] iscsi: extended cdb support
  [SCSI] zfcp: Fix error handling for blocked unit for send FCP command
  [SCSI] zfcp: Remove zfcp_erp_wait from slave destory handler to fix deadlock
  [SCSI] zfcp: fix 31 bit compile warnings
  [SCSI] bsg: no need to set BSG_F_BLOCK bit in bsg_complete_all_commands
  [SCSI] bsg: remove minor in struct bsg_device
  [SCSI] bsg: use better helper list functions
  [SCSI] bsg: replace kobject_get with blk_get_queue
  [SCSI] bsg: takes a ref to struct device in fops->open
  [SCSI] qla1280: remove version check
  [SCSI] libsas: fix endianness bug in sas_ata
  [SCSI] zfcp: fix compiler warning caused by poking inside new semaphore (linux-next)
  [SCSI] aacraid: Do not describe check_reset parameter with its value
  [SCSI] aacraid: Fix down_interruptible() to check the return value
  [SCSI] sun3_scsi_vme: add MODULE_LICENSE
  [SCSI] st: rename flush_write_buffer()
  [SCSI] tgt: use KMEM_CACHE macro
  [SCSI] initio: fix big endian problems for auto request sense
  ...

1 files changed, 170 insertions, 3 deletions

diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index 9337e138ed6..078f2a15f40 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -1,6 +1,6 @@
 /*
  * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2005 QLogic Corporation
+ * Copyright (c)  2003-2008 QLogic Corporation
  *
  * See LICENSE.qla2xxx for copyright and licensing details.
  */
@@ -719,7 +719,7 @@ struct tsk_mgmt_entry {
 
 	uint16_t timeout;		/* Command timeout. */
 
-	uint8_t lun[8];			/* FCP LUN (BE). */
+	struct scsi_lun lun;		/* FCP LUN (BE). */
 
 	uint32_t control_flags;		/* Control Flags. */
 #define TCF_NOTMCMD_TO_TARGET	BIT_31
@@ -793,7 +793,19 @@ struct device_reg_24xx {
 #define FA_VPD_NVRAM_ADDR	0x48000
 #define FA_FEATURE_ADDR		0x4C000
 #define FA_FLASH_DESCR_ADDR	0x50000
-#define FA_HW_EVENT_ADDR	0x54000
+#define FA_HW_EVENT0_ADDR	0x54000
+#define FA_HW_EVENT1_ADDR	0x54200
+#define FA_HW_EVENT_SIZE	0x200
+#define FA_HW_EVENT_ENTRY_SIZE	4
+/*
+ * Flash Error Log Event Codes.
+ */
+#define HW_EVENT_RESET_ERR	0xF00B
+#define HW_EVENT_ISP_ERR	0xF020
+#define HW_EVENT_PARITY_ERR	0xF022
+#define HW_EVENT_NVRAM_CHKSUM_ERR	0xF023
+#define HW_EVENT_FLASH_FW_ERR	0xF024
+
 #define FA_BOOT_LOG_ADDR	0x58000
 #define FA_FW_DUMP0_ADDR	0x60000
 #define FA_FW_DUMP1_ADDR	0x70000
@@ -1174,4 +1186,159 @@ struct vf_evfp_entry_24xx {
 };
 
 /* END MID Support ***********************************************************/
+
+/* Flash Description Table ***************************************************/
+
+struct qla_fdt_layout {
+	uint8_t sig[4];
+	uint16_t version;
+	uint16_t len;
+	uint16_t checksum;
+	uint8_t unused1[2];
+	uint8_t model[16];
+	uint16_t man_id;
+	uint16_t id;
+	uint8_t flags;
+	uint8_t erase_cmd;
+	uint8_t alt_erase_cmd;
+	uint8_t wrt_enable_cmd;
+	uint8_t wrt_enable_bits;
+	uint8_t wrt_sts_reg_cmd;
+	uint8_t unprotect_sec_cmd;
+	uint8_t read_man_id_cmd;
+	uint32_t block_size;
+	uint32_t alt_block_size;
+	uint32_t flash_size;
+	uint32_t wrt_enable_data;
+	uint8_t read_id_addr_len;
+	uint8_t wrt_disable_bits;
+	uint8_t read_dev_id_len;
+	uint8_t chip_erase_cmd;
+	uint16_t read_timeout;
+	uint8_t protect_sec_cmd;
+	uint8_t unused2[65];
+};
+
+/* 84XX Support **************************************************************/
+
+#define MBA_ISP84XX_ALERT	0x800f  /* Alert Notification. */
+#define A84_PANIC_RECOVERY	0x1
+#define A84_OP_LOGIN_COMPLETE	0x2
+#define A84_DIAG_LOGIN_COMPLETE	0x3
+#define A84_GOLD_LOGIN_COMPLETE	0x4
+
+#define MBC_ISP84XX_RESET	0x3a    /* Reset. */
+
+#define FSTATE_REMOTE_FC_DOWN	BIT_0
+#define FSTATE_NSL_LINK_DOWN	BIT_1
+#define FSTATE_IS_DIAG_FW	BIT_2
+#define FSTATE_LOGGED_IN	BIT_3
+#define FSTATE_WAITING_FOR_VERIFY	BIT_4
+
+#define VERIFY_CHIP_IOCB_TYPE	0x1B
+struct verify_chip_entry_84xx {
+	uint8_t entry_type;
+	uint8_t entry_count;
+	uint8_t sys_defined;
+	uint8_t entry_status;
+
+	uint32_t handle;
+
+	uint16_t options;
+#define VCO_DONT_UPDATE_FW	BIT_0
+#define VCO_FORCE_UPDATE	BIT_1
+#define VCO_DONT_RESET_UPDATE	BIT_2
+#define VCO_DIAG_FW		BIT_3
+#define VCO_END_OF_DATA		BIT_14
+#define VCO_ENABLE_DSD		BIT_15
+
+	uint16_t reserved_1;
+
+	uint16_t data_seg_cnt;
+	uint16_t reserved_2[3];
+
+	uint32_t fw_ver;
+	uint32_t exchange_address;
+
+	uint32_t reserved_3[3];
+	uint32_t fw_size;
+	uint32_t fw_seq_size;
+	uint32_t relative_offset;
+
+	uint32_t dseg_address[2];
+	uint32_t dseg_length;
+};
+
+struct verify_chip_rsp_84xx {
+	uint8_t entry_type;
+	uint8_t entry_count;
+	uint8_t sys_defined;
+	uint8_t entry_status;
+
+	uint32_t handle;
+
+	uint16_t comp_status;
+#define CS_VCS_CHIP_FAILURE	0x3
+#define CS_VCS_BAD_EXCHANGE	0x8
+#define CS_VCS_SEQ_COMPLETEi	0x40
+
+	uint16_t failure_code;
+#define VFC_CHECKSUM_ERROR	0x1
+#define VFC_INVALID_LEN		0x2
+#define VFC_ALREADY_IN_PROGRESS	0x8
+
+	uint16_t reserved_1[4];
+
+	uint32_t fw_ver;
+	uint32_t exchange_address;
+
+	uint32_t reserved_2[6];
+};
+
+#define ACCESS_CHIP_IOCB_TYPE	0x2B
+struct access_chip_84xx {
+	uint8_t entry_type;
+	uint8_t entry_count;
+	uint8_t sys_defined;
+	uint8_t entry_status;
+
+	uint32_t handle;
+
+	uint16_t options;
+#define ACO_DUMP_MEMORY		0x0
+#define ACO_LOAD_MEMORY		0x1
+#define ACO_CHANGE_CONFIG_PARAM	0x2
+#define ACO_REQUEST_INFO	0x3
+
+	uint16_t reserved1;
+
+	uint16_t dseg_count;
+	uint16_t reserved2[3];
+
+	uint32_t parameter1;
+	uint32_t parameter2;
+	uint32_t parameter3;
+
+	uint32_t reserved3[3];
+	uint32_t total_byte_cnt;
+	uint32_t reserved4;
+
+	uint32_t dseg_address[2];
+	uint32_t dseg_length;
+};
+
+struct access_chip_rsp_84xx {
+	uint8_t entry_type;
+	uint8_t entry_count;
+	uint8_t sys_defined;
+	uint8_t entry_status;
+
+	uint32_t handle;
+
+	uint16_t comp_status;
+	uint16_t failure_code;
+	uint32_t residual_count;
+
+	uint32_t reserved[12];
+};
 #endif