[SCSI] qla2xxx: Use GFF_ID to check FCP-SCSI FC4 type before logging into Nx_Ports

The default method that qla2xxx uses is the GID_PT nameserver command to
get a list of Nx_Ports. This patch adds a GFF_ID call for each port
returned by GID_PT to get the FC4 type. If the FC4 type is not FCP SCSI
then the qla2xxx driver will not record that port in it's port database.
For switches that do not support the GFF_ID command, the behavior will be
for qla2xxx to store that port anyways.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

1 files changed, 72 insertions, 0 deletions

diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index 872c55f049a..2fabae8daec 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -1913,3 +1913,75 @@ qla2x00_gpsc(scsi_qla_host_t *vha, sw_info_t *list)
 
 	return (rval);
 }
+
+/**
+ * qla2x00_gff_id() - SNS Get FC-4 Features (GFF_ID) query.
+ *
+ * @ha: HA context
+ * @list: switch info entries to populate
+ *
+ */
+void
+qla2x00_gff_id(scsi_qla_host_t *vha, sw_info_t *list)
+{
+	int		rval;
+	uint16_t	i;
+
+	ms_iocb_entry_t	*ms_pkt;
+	struct ct_sns_req	*ct_req;
+	struct ct_sns_rsp	*ct_rsp;
+	struct qla_hw_data *ha = vha->hw;
+	uint8_t fcp_scsi_features = 0;
+
+	for (i = 0; i < MAX_FIBRE_DEVICES; i++) {
+		/* Set default FC4 Type as UNKNOWN so the default is to
+		 * Process this port */
+		list[i].fc4_type = FC4_TYPE_UNKNOWN;
+
+		/* Do not attempt GFF_ID if we are not FWI_2 capable */
+		if (!IS_FWI2_CAPABLE(ha))
+			continue;
+
+		/* Prepare common MS IOCB */
+		ms_pkt = ha->isp_ops->prep_ms_iocb(vha, GFF_ID_REQ_SIZE,
+		    GFF_ID_RSP_SIZE);
+
+		/* Prepare CT request */
+		ct_req = qla2x00_prep_ct_req(&ha->ct_sns->p.req, GFF_ID_CMD,
+		    GFF_ID_RSP_SIZE);
+		ct_rsp = &ha->ct_sns->p.rsp;
+
+		/* Prepare CT arguments -- port_id */
+		ct_req->req.port_id.port_id[0] = list[i].d_id.b.domain;
+		ct_req->req.port_id.port_id[1] = list[i].d_id.b.area;
+		ct_req->req.port_id.port_id[2] = list[i].d_id.b.al_pa;
+
+		/* Execute MS IOCB */
+		rval = qla2x00_issue_iocb(vha, ha->ms_iocb, ha->ms_iocb_dma,
+		   sizeof(ms_iocb_entry_t));
+
+		if (rval != QLA_SUCCESS) {
+			DEBUG2_3(printk(KERN_INFO
+			    "scsi(%ld): GFF_ID issue IOCB failed "
+			    "(%d).\n", vha->host_no, rval));
+		} else if (qla2x00_chk_ms_status(vha, ms_pkt, ct_rsp,
+			       "GPN_ID") != QLA_SUCCESS) {
+			DEBUG2_3(printk(KERN_INFO
+			    "scsi(%ld): GFF_ID IOCB status had a "
+			    "failure status code\n", vha->host_no));
+		} else {
+			fcp_scsi_features =
+			   ct_rsp->rsp.gff_id.fc4_features[GFF_FCP_SCSI_OFFSET];
+			fcp_scsi_features &= 0x0f;
+
+			if (fcp_scsi_features)
+				list[i].fc4_type = FC4_TYPE_FCP_SCSI;
+			else
+				list[i].fc4_type = FC4_TYPE_OTHER;
+		}
+
+		/* Last device exit. */
+		if (list[i].d_id.b.rsvd_1 != 0)
+			break;
+	}
+}