Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (45 commits)
  [SCSI] qla2xxx: Update version number to 8.03.00-k1.
  [SCSI] qla2xxx: Add ISP81XX support.
  [SCSI] qla2xxx: Use proper request/response queues with MQ instantiations.
  [SCSI] qla2xxx: Correct MQ-chain information retrieval during a firmware dump.
  [SCSI] qla2xxx: Collapse EFT/FCE copy procedures during a firmware dump.
  [SCSI] qla2xxx: Don't pollute kernel logs with ZIO/RIO status messages.
  [SCSI] qla2xxx: Don't fallback to interrupt-polling during re-initialization with MSI-X enabled.
  [SCSI] qla2xxx: Remove support for reading/writing HW-event-log.
  [SCSI] cxgb3i: add missing include
  [SCSI] scsi_lib: fix DID_RESET status problems
  [SCSI] fc transport: restore missing dev_loss_tmo callback to LLDD
  [SCSI] aha152x_cs: Fix regression that keeps driver from using shared interrupts
  [SCSI] sd: Correctly handle 6-byte commands with DIX
  [SCSI] sd: DIF: Fix tagging on platforms with signed char
  [SCSI] sd: DIF: Show app tag on error
  [SCSI] Fix error handling for DIF/DIX
  [SCSI] scsi_lib: don't decrement busy counters when inserting commands
  [SCSI] libsas: fix test for negative unsigned and typos
  [SCSI] a2091, gvp11: kill warn_unused_result warnings
  [SCSI] fusion: Move a dereference below a NULL test
  ...

Fixed up trivial conflict due to moving the async part of sd_probe
around in the async probes vs using dev_set_name() in naming.

1 files changed, 281 insertions, 14 deletions

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 52ed56ecf19..2d4f32b4df5 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -552,10 +552,6 @@ qla24xx_reset_risc(scsi_qla_host_t *vha)
 		d2 = RD_REG_DWORD(&reg->ctrl_status);
 		barrier();
 	}
-	if (cnt == 0 || hw_evt)
-		qla2xxx_hw_event_log(vha, HW_EVENT_RESET_ERR,
-		    RD_REG_WORD(&reg->mailbox1), RD_REG_WORD(&reg->mailbox2),
-		    RD_REG_WORD(&reg->mailbox3));
 
 	WRT_REG_DWORD(&reg->hccr, HCCRX_SET_RISC_RESET);
 	RD_REG_DWORD(&reg->hccr);
@@ -574,6 +570,9 @@ qla24xx_reset_risc(scsi_qla_host_t *vha)
 	}
 
 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+	if (IS_NOPOLLING_TYPE(ha))
+		ha->isp_ops->enable_intrs(ha);
 }
 
 /**
@@ -779,16 +778,19 @@ qla2x00_alloc_fw_dump(scsi_qla_host_t *vha)
 		mem_size = (ha->fw_memory_size - 0x11000 + 1) *
 		    sizeof(uint16_t);
 	} else if (IS_FWI2_CAPABLE(ha)) {
-		fixed_size = IS_QLA25XX(ha) ?
-			offsetof(struct qla25xx_fw_dump, ext_mem) :
-			offsetof(struct qla24xx_fw_dump, ext_mem);
+		if (IS_QLA81XX(ha))
+			fixed_size = offsetof(struct qla81xx_fw_dump, ext_mem);
+		else if (IS_QLA25XX(ha))
+			fixed_size = offsetof(struct qla25xx_fw_dump, ext_mem);
+		else
+			fixed_size = offsetof(struct qla24xx_fw_dump, ext_mem);
 		mem_size = (ha->fw_memory_size - 0x100000 + 1) *
 		    sizeof(uint32_t);
 		if (ha->mqenable)
 			mq_size = sizeof(struct qla2xxx_mq_chain);
 
 		/* Allocate memory for Fibre Channel Event Buffer. */
-		if (!IS_QLA25XX(ha))
+		if (!IS_QLA25XX(ha) && !IS_QLA81XX(ha))
 			goto try_eft;
 
 		tc = dma_alloc_coherent(&ha->pdev->dev, FCE_SIZE, &tc_dma,
@@ -851,7 +853,9 @@ cont_alloc:
 
 	dump_size = offsetof(struct qla2xxx_fw_dump, isp);
 	dump_size += fixed_size + mem_size + req_q_size + rsp_q_size +
-	    mq_size + eft_size + fce_size;
+	    eft_size;
+	ha->chain_offset = dump_size;
+	dump_size += mq_size + fce_size;
 
 	ha->fw_dump = vmalloc(dump_size);
 	if (!ha->fw_dump) {
@@ -987,7 +991,8 @@ qla2x00_setup_chip(scsi_qla_host_t *vha)
 				    &ha->fw_major_version,
 				    &ha->fw_minor_version,
 				    &ha->fw_subminor_version,
-				    &ha->fw_attributes, &ha->fw_memory_size);
+				    &ha->fw_attributes, &ha->fw_memory_size,
+				    ha->mpi_version, &ha->mpi_capabilities);
 				ha->flags.npiv_supported = 0;
 				if (IS_QLA2XXX_MIDTYPE(ha) &&
 					 (ha->fw_attributes & BIT_2)) {
@@ -1665,10 +1670,6 @@ qla2x00_nvram_config(scsi_qla_host_t *vha)
 		qla_printk(KERN_WARNING, ha, "Falling back to functioning (yet "
 		    "invalid -- WWPN) defaults.\n");
 
-		if (chksum)
-			qla2xxx_hw_event_log(vha, HW_EVENT_NVRAM_CHKSUM_ERR, 0,
-			    MSW(chksum), LSW(chksum));
-
 		/*
 		 * Set default initialization control block.
 		 */
@@ -4255,3 +4256,269 @@ qla84xx_init_chip(scsi_qla_host_t *vha)
 	return rval != QLA_SUCCESS || status[0] ? QLA_FUNCTION_FAILED:
 	    QLA_SUCCESS;
 }
+
+/* 81XX Support **************************************************************/
+
+int
+qla81xx_nvram_config(scsi_qla_host_t *vha)
+{
+	int   rval;
+	struct init_cb_81xx *icb;
+	struct nvram_81xx *nv;
+	uint32_t *dptr;
+	uint8_t  *dptr1, *dptr2;
+	uint32_t chksum;
+	uint16_t cnt;
+	struct qla_hw_data *ha = vha->hw;
+
+	rval = QLA_SUCCESS;
+	icb = (struct init_cb_81xx *)ha->init_cb;
+	nv = ha->nvram;
+
+	/* Determine NVRAM starting address. */
+	ha->nvram_size = sizeof(struct nvram_81xx);
+	ha->nvram_base = FA_NVRAM_FUNC0_ADDR;
+	ha->vpd_size = FA_NVRAM_VPD_SIZE;
+	ha->vpd_base = FA_NVRAM_VPD0_ADDR;
+	if (PCI_FUNC(ha->pdev->devfn) & 1) {
+		ha->nvram_base = FA_NVRAM_FUNC1_ADDR;
+		ha->vpd_base = FA_NVRAM_VPD1_ADDR;
+	}
+
+	/* Get VPD data into cache */
+	ha->vpd = ha->nvram + VPD_OFFSET;
+	ha->isp_ops->read_nvram(vha, (uint8_t *)ha->vpd,
+	    ha->nvram_base - FA_NVRAM_FUNC0_ADDR, FA_NVRAM_VPD_SIZE * 4);
+
+	/* Get NVRAM data into cache and calculate checksum. */
+	dptr = (uint32_t *)nv;
+	ha->isp_ops->read_nvram(vha, (uint8_t *)dptr, ha->nvram_base,
+	    ha->nvram_size);
+	for (cnt = 0, chksum = 0; cnt < ha->nvram_size >> 2; cnt++)
+		chksum += le32_to_cpu(*dptr++);
+
+	DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", ha->host_no));
+	DEBUG5(qla2x00_dump_buffer((uint8_t *)nv, ha->nvram_size));
+
+	/* Bad NVRAM data, set defaults parameters. */
+	if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' || nv->id[2] != 'P'
+	    || nv->id[3] != ' ' ||
+	    nv->nvram_version < __constant_cpu_to_le16(ICB_VERSION)) {
+		/* Reset NVRAM data. */
+		qla_printk(KERN_WARNING, ha, "Inconsistent NVRAM detected: "
+		    "checksum=0x%x id=%c version=0x%x.\n", chksum, nv->id[0],
+		    le16_to_cpu(nv->nvram_version));
+		qla_printk(KERN_WARNING, ha, "Falling back to functioning (yet "
+		    "invalid -- WWPN) defaults.\n");
+
+		/*
+		 * Set default initialization control block.
+		 */
+		memset(nv, 0, ha->nvram_size);
+		nv->nvram_version = __constant_cpu_to_le16(ICB_VERSION);
+		nv->version = __constant_cpu_to_le16(ICB_VERSION);
+		nv->frame_payload_size = __constant_cpu_to_le16(2048);
+		nv->execution_throttle = __constant_cpu_to_le16(0xFFFF);
+		nv->exchange_count = __constant_cpu_to_le16(0);
+		nv->port_name[0] = 0x21;
+		nv->port_name[1] = 0x00 + PCI_FUNC(ha->pdev->devfn);
+		nv->port_name[2] = 0x00;
+		nv->port_name[3] = 0xe0;
+		nv->port_name[4] = 0x8b;
+		nv->port_name[5] = 0x1c;
+		nv->port_name[6] = 0x55;
+		nv->port_name[7] = 0x86;
+		nv->node_name[0] = 0x20;
+		nv->node_name[1] = 0x00;
+		nv->node_name[2] = 0x00;
+		nv->node_name[3] = 0xe0;
+		nv->node_name[4] = 0x8b;
+		nv->node_name[5] = 0x1c;
+		nv->node_name[6] = 0x55;
+		nv->node_name[7] = 0x86;
+		nv->login_retry_count = __constant_cpu_to_le16(8);
+		nv->interrupt_delay_timer = __constant_cpu_to_le16(0);
+		nv->login_timeout = __constant_cpu_to_le16(0);
+		nv->firmware_options_1 =
+		    __constant_cpu_to_le32(BIT_14|BIT_13|BIT_2|BIT_1);
+		nv->firmware_options_2 = __constant_cpu_to_le32(2 << 4);
+		nv->firmware_options_2 |= __constant_cpu_to_le32(BIT_12);
+		nv->firmware_options_3 = __constant_cpu_to_le32(2 << 13);
+		nv->host_p = __constant_cpu_to_le32(BIT_11|BIT_10);
+		nv->efi_parameters = __constant_cpu_to_le32(0);
+		nv->reset_delay = 5;
+		nv->max_luns_per_target = __constant_cpu_to_le16(128);
+		nv->port_down_retry_count = __constant_cpu_to_le16(30);
+		nv->link_down_timeout = __constant_cpu_to_le16(30);
+		nv->enode_mac[0] = 0x01;
+		nv->enode_mac[1] = 0x02;
+		nv->enode_mac[2] = 0x03;
+		nv->enode_mac[3] = 0x04;
+		nv->enode_mac[4] = 0x05;
+		nv->enode_mac[5] = 0x06 + PCI_FUNC(ha->pdev->devfn);
+
+		rval = 1;
+	}
+
+	/* Reset Initialization control block */
+	memset(icb, 0, sizeof(struct init_cb_81xx));
+
+	/* Copy 1st segment. */
+	dptr1 = (uint8_t *)icb;
+	dptr2 = (uint8_t *)&nv->version;
+	cnt = (uint8_t *)&icb->response_q_inpointer - (uint8_t *)&icb->version;
+	while (cnt--)
+		*dptr1++ = *dptr2++;
+
+	icb->login_retry_count = nv->login_retry_count;
+
+	/* Copy 2nd segment. */
+	dptr1 = (uint8_t *)&icb->interrupt_delay_timer;
+	dptr2 = (uint8_t *)&nv->interrupt_delay_timer;
+	cnt = (uint8_t *)&icb->reserved_5 -
+	    (uint8_t *)&icb->interrupt_delay_timer;
+	while (cnt--)
+		*dptr1++ = *dptr2++;
+
+	memcpy(icb->enode_mac, nv->enode_mac, sizeof(icb->enode_mac));
+	/* Some boards (with valid NVRAMs) still have NULL enode_mac!! */
+	if (!memcmp(icb->enode_mac, "\0\0\0\0\0\0", sizeof(icb->enode_mac))) {
+		icb->enode_mac[0] = 0x01;
+		icb->enode_mac[1] = 0x02;
+		icb->enode_mac[2] = 0x03;
+		icb->enode_mac[3] = 0x04;
+		icb->enode_mac[4] = 0x05;
+		icb->enode_mac[5] = 0x06 + PCI_FUNC(ha->pdev->devfn);
+	}
+
+	/*
+	 * Setup driver NVRAM options.
+	 */
+	qla2x00_set_model_info(vha, nv->model_name, sizeof(nv->model_name),
+	    "QLE81XX");
+
+	/* Use alternate WWN? */
+	if (nv->host_p & __constant_cpu_to_le32(BIT_15)) {
+		memcpy(icb->node_name, nv->alternate_node_name, WWN_SIZE);
+		memcpy(icb->port_name, nv->alternate_port_name, WWN_SIZE);
+	}
+
+	/* Prepare nodename */
+	if ((icb->firmware_options_1 & __constant_cpu_to_le32(BIT_14)) == 0) {
+		/*
+		 * Firmware will apply the following mask if the nodename was
+		 * not provided.
+		 */
+		memcpy(icb->node_name, icb->port_name, WWN_SIZE);
+		icb->node_name[0] &= 0xF0;
+	}
+
+	/* Set host adapter parameters. */
+	ha->flags.disable_risc_code_load = 0;
+	ha->flags.enable_lip_reset = 0;
+	ha->flags.enable_lip_full_login =
+	    le32_to_cpu(nv->host_p) & BIT_10 ? 1: 0;
+	ha->flags.enable_target_reset =
+	    le32_to_cpu(nv->host_p) & BIT_11 ? 1: 0;
+	ha->flags.enable_led_scheme = 0;
+	ha->flags.disable_serdes = le32_to_cpu(nv->host_p) & BIT_5 ? 1: 0;
+
+	ha->operating_mode = (le32_to_cpu(icb->firmware_options_2) &
+	    (BIT_6 | BIT_5 | BIT_4)) >> 4;
+
+	/* save HBA serial number */
+	ha->serial0 = icb->port_name[5];
+	ha->serial1 = icb->port_name[6];
+	ha->serial2 = icb->port_name[7];
+	memcpy(vha->node_name, icb->node_name, WWN_SIZE);
+	memcpy(vha->port_name, icb->port_name, WWN_SIZE);
+
+	icb->execution_throttle = __constant_cpu_to_le16(0xFFFF);
+
+	ha->retry_count = le16_to_cpu(nv->login_retry_count);
+
+	/* Set minimum login_timeout to 4 seconds. */
+	if (le16_to_cpu(nv->login_timeout) < ql2xlogintimeout)
+		nv->login_timeout = cpu_to_le16(ql2xlogintimeout);
+	if (le16_to_cpu(nv->login_timeout) < 4)
+		nv->login_timeout = __constant_cpu_to_le16(4);
+	ha->login_timeout = le16_to_cpu(nv->login_timeout);
+	icb->login_timeout = nv->login_timeout;
+
+	/* Set minimum RATOV to 100 tenths of a second. */
+	ha->r_a_tov = 100;
+
+	ha->loop_reset_delay = nv->reset_delay;
+
+	/* Link Down Timeout = 0:
+	 *
+	 * 	When Port Down timer expires we will start returning
+	 *	I/O's to OS with "DID_NO_CONNECT".
+	 *
+	 * Link Down Timeout != 0:
+	 *
+	 *	 The driver waits for the link to come up after link down
+	 *	 before returning I/Os to OS with "DID_NO_CONNECT".
+	 */
+	if (le16_to_cpu(nv->link_down_timeout) == 0) {
+		ha->loop_down_abort_time =
+		    (LOOP_DOWN_TIME - LOOP_DOWN_TIMEOUT);
+	} else {
+		ha->link_down_timeout =	le16_to_cpu(nv->link_down_timeout);
+		ha->loop_down_abort_time =
+		    (LOOP_DOWN_TIME - ha->link_down_timeout);
+	}
+
+	/* Need enough time to try and get the port back. */
+	ha->port_down_retry_count = le16_to_cpu(nv->port_down_retry_count);
+	if (qlport_down_retry)
+		ha->port_down_retry_count = qlport_down_retry;
+
+	/* Set login_retry_count */
+	ha->login_retry_count  = le16_to_cpu(nv->login_retry_count);
+	if (ha->port_down_retry_count ==
+	    le16_to_cpu(nv->port_down_retry_count) &&
+	    ha->port_down_retry_count > 3)
+		ha->login_retry_count = ha->port_down_retry_count;
+	else if (ha->port_down_retry_count > (int)ha->login_retry_count)
+		ha->login_retry_count = ha->port_down_retry_count;
+	if (ql2xloginretrycount)
+		ha->login_retry_count = ql2xloginretrycount;
+
+	/* Enable ZIO. */
+	if (!vha->flags.init_done) {
+		ha->zio_mode = le32_to_cpu(icb->firmware_options_2) &
+		    (BIT_3 | BIT_2 | BIT_1 | BIT_0);
+		ha->zio_timer = le16_to_cpu(icb->interrupt_delay_timer) ?
+		    le16_to_cpu(icb->interrupt_delay_timer): 2;
+	}
+	icb->firmware_options_2 &= __constant_cpu_to_le32(
+	    ~(BIT_3 | BIT_2 | BIT_1 | BIT_0));
+	vha->flags.process_response_queue = 0;
+	if (ha->zio_mode != QLA_ZIO_DISABLED) {
+		ha->zio_mode = QLA_ZIO_MODE_6;
+
+		DEBUG2(printk("scsi(%ld): ZIO mode %d enabled; timer delay "
+		    "(%d us).\n", vha->host_no, ha->zio_mode,
+		    ha->zio_timer * 100));
+		qla_printk(KERN_INFO, ha,
+		    "ZIO mode %d enabled; timer delay (%d us).\n",
+		    ha->zio_mode, ha->zio_timer * 100);
+
+		icb->firmware_options_2 |= cpu_to_le32(
+		    (uint32_t)ha->zio_mode);
+		icb->interrupt_delay_timer = cpu_to_le16(ha->zio_timer);
+		vha->flags.process_response_queue = 1;
+	}
+
+	if (rval) {
+		DEBUG2_3(printk(KERN_WARNING
+		    "scsi(%ld): NVRAM configuration failed!\n", vha->host_no));
+	}
+	return (rval);
+}
+
+void
+qla81xx_update_fw_options(scsi_qla_host_t *ha)
+{
+}