Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (58 commits)
  [SCSI] zfcp: clear boxed flag on unit reopen.
  [SCSI] zfcp: clear adapter failed flag if an fsf request times out.
  [SCSI] zfcp: rework request ID management.
  [SCSI] zfcp: Fix deadlock between zfcp ERP and SCSI
  [SCSI] zfcp: Locking for req_no and req_seq_no
  [SCSI] zfcp: print S_ID and D_ID with 3 bytes
  [SCSI] ipr: Use PCI-E reset API for new ipr adapter
  [SCSI] qla2xxx: Update version number to 8.01.07-k7.
  [SCSI] qla2xxx: Add MSI support.
  [SCSI] qla2xxx: Correct pci_set_msi() usage semantics.
  [SCSI] qla2xxx: Attempt to stop firmware only if it had been previously executed.
  [SCSI] qla2xxx: Honor NVRAM port-down-retry-count settings.
  [SCSI] qla2xxx: Error-out during probe() if we're unable to complete HBA initialization.
  [SCSI] zfcp: Stop system after memory corruption
  [SCSI] mesh: cleanup variable usage in interrupt handler
  [SCSI] megaraid: replace yield() with cond_resched()
  [SCSI] megaraid: fix warnings when CONFIG_PROC_FS=n
  [SCSI] aacraid: correct SUN products to README
  [SCSI] aacraid: superfluous adapter reset for IBM 8 series ServeRAID controllers
  [SCSI] aacraid: kexec fix (reset interrupt handler)
  ...

1 files changed, 16 insertions, 17 deletions

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 3e296ab845b..db998d84cd4 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -130,18 +130,17 @@ qla2x00_initialize_adapter(scsi_qla_host_t *ha)
 int
 qla2100_pci_config(scsi_qla_host_t *ha)
 {
-	uint16_t w, mwi;
+	int ret;
+	uint16_t w;
 	uint32_t d;
 	unsigned long flags;
 	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 
 	pci_set_master(ha->pdev);
-	mwi = 0;
-	if (pci_set_mwi(ha->pdev))
-		mwi = PCI_COMMAND_INVALIDATE;
+	ret = pci_set_mwi(ha->pdev);
 
 	pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
-	w |= mwi | (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
+	w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
 	pci_write_config_word(ha->pdev, PCI_COMMAND, w);
 
 	/* Reset expansion ROM address decode enable */
@@ -166,22 +165,22 @@ qla2100_pci_config(scsi_qla_host_t *ha)
 int
 qla2300_pci_config(scsi_qla_host_t *ha)
 {
-	uint16_t	w, mwi;
+	int		ret;
+	uint16_t	w;
 	uint32_t	d;
 	unsigned long   flags = 0;
 	uint32_t	cnt;
 	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 
 	pci_set_master(ha->pdev);
-	mwi = 0;
-	if (pci_set_mwi(ha->pdev))
-		mwi = PCI_COMMAND_INVALIDATE;
+	ret = pci_set_mwi(ha->pdev);
 
 	pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
-	w |= mwi | (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
+	w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
 
 	if (IS_QLA2322(ha) || IS_QLA6322(ha))
 		w &= ~PCI_COMMAND_INTX_DISABLE;
+	pci_write_config_word(ha->pdev, PCI_COMMAND, w);
 
 	/*
 	 * If this is a 2300 card and not 2312, reset the
@@ -210,7 +209,7 @@ qla2300_pci_config(scsi_qla_host_t *ha)
 		ha->fb_rev = RD_FB_CMD_REG(ha, reg);
 
 		if (ha->fb_rev == FPM_2300)
-			w &= ~PCI_COMMAND_INVALIDATE;
+			pci_clear_mwi(ha->pdev);
 
 		/* Deselect FPM registers. */
 		WRT_REG_WORD(&reg->ctrl_status, 0x0);
@@ -227,7 +226,6 @@ qla2300_pci_config(scsi_qla_host_t *ha)
 
 		spin_unlock_irqrestore(&ha->hardware_lock, flags);
 	}
-	pci_write_config_word(ha->pdev, PCI_COMMAND, w);
 
 	pci_write_config_byte(ha->pdev, PCI_LATENCY_TIMER, 0x80);
 
@@ -253,19 +251,18 @@ qla2300_pci_config(scsi_qla_host_t *ha)
 int
 qla24xx_pci_config(scsi_qla_host_t *ha)
 {
-	uint16_t w, mwi;
+	int ret;
+	uint16_t w;
 	uint32_t d;
 	unsigned long flags = 0;
 	struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
 	int pcix_cmd_reg, pcie_dctl_reg;
 
 	pci_set_master(ha->pdev);
-	mwi = 0;
-	if (pci_set_mwi(ha->pdev))
-		mwi = PCI_COMMAND_INVALIDATE;
+	ret = pci_set_mwi(ha->pdev);
 
 	pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
-	w |= mwi | (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
+	w |= (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
 	w &= ~PCI_COMMAND_INTX_DISABLE;
 	pci_write_config_word(ha->pdev, PCI_COMMAND, w);
 
@@ -3931,6 +3928,8 @@ qla2x00_try_to_stop_firmware(scsi_qla_host_t *ha)
 
 	if (!IS_QLA24XX(ha) && !IS_QLA54XX(ha))
 		return;
+	if (!ha->fw_major_version)
+		return;
 
 	ret = qla2x00_stop_firmware(ha);
 	for (retries = 5; ret != QLA_SUCCESS && retries ; retries--) {