Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (209 commits)
  [SCSI] fix oops during scsi scanning
  [SCSI] libsrp: fix memory leak in srp_ring_free()
  [SCSI] libiscsi, bnx2i: make bound ep check common
  [SCSI] libiscsi: add completion function for drivers that do not need pdu processing
  [SCSI] scsi_dh_rdac: changes for rdac debug logging
  [SCSI] scsi_dh_rdac: changes to collect the rdac debug information during the initialization
  [SCSI] scsi_dh_rdac: move the init code from rdac_activate to rdac_bus_attach
  [SCSI] sg: fix oops in the error path in sg_build_indirect()
  [SCSI] mptsas : Bump version to 3.04.12
  [SCSI] mptsas : FW event thread and scsi mid layer deadlock in SYNCHRONIZE CACHE command
  [SCSI] mptsas : Send DID_NO_CONNECT for pending IOs of removed device
  [SCSI] mptsas : PAE Kernel more than 4 GB kernel panic
  [SCSI] mptsas : NULL pointer on big endian systems causing Expander not to tear off
  [SCSI] mptsas : Sanity check for phyinfo is added
  [SCSI] scsi_dh_rdac: Add support for Sun StorageTek ST2500, ST2510 and ST2530
  [SCSI] pmcraid: PMC-Sierra MaxRAID driver to support 6Gb/s SAS RAID controller
  [SCSI] qla2xxx: Update version number to 8.03.01-k6.
  [SCSI] qla2xxx: Properly delete rports attached to a vport.
  [SCSI] qla2xxx: Correct various NPIV issues.
  [SCSI] qla2xxx: Correct qla2x00_eh_wait_on_command() to wait correctly.
  ...

1 files changed, 15 insertions, 12 deletions

diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index cd78c501803..42b799abba5 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -42,7 +42,6 @@ qla24xx_allocate_vp_id(scsi_qla_host_t *vha)
 
 	set_bit(vp_id, ha->vp_idx_map);
 	ha->num_vhosts++;
-	ha->cur_vport_count++;
 	vha->vp_idx = vp_id;
 	list_add_tail(&vha->list, &ha->vp_list);
 	mutex_unlock(&ha->vport_lock);
@@ -58,7 +57,6 @@ qla24xx_deallocate_vp_id(scsi_qla_host_t *vha)
 	mutex_lock(&ha->vport_lock);
 	vp_id = vha->vp_idx;
 	ha->num_vhosts--;
-	ha->cur_vport_count--;
 	clear_bit(vp_id, ha->vp_idx_map);
 	list_del(&vha->list);
 	mutex_unlock(&ha->vport_lock);
@@ -235,7 +233,11 @@ qla2x00_vp_abort_isp(scsi_qla_host_t *vha)
 			atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
 	}
 
-	/* To exclusively reset vport, we need to log it out first.*/
+	/*
+	 * To exclusively reset vport, we need to log it out first.  Note: this
+	 * control_vp can fail if ISP reset is already issued, this is
+	 * expected, as the vp would be already logged out due to ISP reset.
+	 */
 	if (!test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags))
 		qla24xx_control_vp(vha, VCE_COMMAND_DISABLE_VPS_LOGO_ALL);
 
@@ -247,18 +249,11 @@ qla2x00_vp_abort_isp(scsi_qla_host_t *vha)
 static int
 qla2x00_do_dpc_vp(scsi_qla_host_t *vha)
 {
-	struct qla_hw_data *ha = vha->hw;
-	scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
+	qla2x00_do_work(vha);
 
 	if (test_and_clear_bit(VP_IDX_ACQUIRED, &vha->vp_flags)) {
 		/* VP acquired. complete port configuration */
-		if (atomic_read(&base_vha->loop_state) == LOOP_READY) {
-			qla24xx_configure_vp(vha);
-		} else {
-			set_bit(VP_IDX_ACQUIRED, &vha->vp_flags);
-			set_bit(VP_DPC_NEEDED, &base_vha->dpc_flags);
-		}
-
+		qla24xx_configure_vp(vha);
 		return 0;
 	}
 
@@ -309,6 +304,9 @@ qla2x00_do_dpc_all_vps(scsi_qla_host_t *vha)
 
 	clear_bit(VP_DPC_NEEDED, &vha->dpc_flags);
 
+	if (!(ha->current_topology & ISP_CFG_F))
+		return;
+
 	list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) {
 		if (vp->vp_idx)
 			ret = qla2x00_do_dpc_vp(vp);
@@ -413,6 +411,11 @@ qla24xx_create_vhost(struct fc_vport *fc_vport)
 
 	vha->flags.init_done = 1;
 
+	mutex_lock(&ha->vport_lock);
+	set_bit(vha->vp_idx, ha->vp_idx_map);
+	ha->cur_vport_count++;
+	mutex_unlock(&ha->vport_lock);
+
 	return vha;
 
 create_vhost_failed: