Merge branch 'depends/rmk/restart' into next/cleanup

Conflicts:
	arch/arm/mach-at91/at91cap9.c
	arch/arm/mach-at91/at91sam9260.c
	arch/arm/mach-at91/at91sam9261.c
	arch/arm/mach-at91/at91sam9263.c
	arch/arm/mach-at91/at91sam9g45.c
	arch/arm/mach-at91/at91sam9rl.c
	arch/arm/mach-exynos/cpu.c
	arch/arm/mach-shmobile/board-kota2.c

This resolves a bunch of conflicts between the arm-soc tree
and changes from the arm tree that have gone upstream.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 27 insertions, 15 deletions

diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index 94bded5ddce..03554934b0a 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -3817,6 +3817,20 @@ exit:
 	return rval;
 }
 
+void qla82xx_clear_pending_mbx(scsi_qla_host_t *vha)
+{
+	struct qla_hw_data *ha = vha->hw;
+
+	if (ha->flags.mbox_busy) {
+		ha->flags.mbox_int = 1;
+		ha->flags.mbox_busy = 0;
+		ql_log(ql_log_warn, vha, 0x6010,
+		    "Doing premature completion of mbx command.\n");
+		if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags))
+			complete(&ha->mbx_intr_comp);
+	}
+}
+
 void qla82xx_watchdog(scsi_qla_host_t *vha)
 {
 	uint32_t dev_state, halt_status;
@@ -3839,9 +3853,13 @@ void qla82xx_watchdog(scsi_qla_host_t *vha)
 			qla2xxx_wake_dpc(vha);
 		} else {
 			if (qla82xx_check_fw_alive(vha)) {
+				ql_dbg(ql_dbg_timer, vha, 0x6011,
+				    "disabling pause transmit on port 0 & 1.\n");
+				qla82xx_wr_32(ha, QLA82XX_CRB_NIU + 0x98,
+				    CRB_NIU_XG_PAUSE_CTL_P0|CRB_NIU_XG_PAUSE_CTL_P1);
 				halt_status = qla82xx_rd_32(ha,
 				    QLA82XX_PEG_HALT_STATUS1);
-				ql_dbg(ql_dbg_timer, vha, 0x6005,
+				ql_log(ql_log_info, vha, 0x6005,
 				    "dumping hw/fw registers:.\n "
 				    " PEG_HALT_STATUS1: 0x%x, PEG_HALT_STATUS2: 0x%x,.\n "
 				    " PEG_NET_0_PC: 0x%x, PEG_NET_1_PC: 0x%x,.\n "
@@ -3858,6 +3876,11 @@ void qla82xx_watchdog(scsi_qla_host_t *vha)
 					    QLA82XX_CRB_PEG_NET_3 + 0x3c),
 				    qla82xx_rd_32(ha,
 					    QLA82XX_CRB_PEG_NET_4 + 0x3c));
+				if (LSW(MSB(halt_status)) == 0x67)
+					ql_log(ql_log_warn, vha, 0xb052,
+					    "Firmware aborted with "
+					    "error code 0x00006700. Device is "
+					    "being reset.\n");
 				if (halt_status & HALT_STATUS_UNRECOVERABLE) {
 					set_bit(ISP_UNRECOVERABLE,
 					    &vha->dpc_flags);
@@ -3869,16 +3892,8 @@ void qla82xx_watchdog(scsi_qla_host_t *vha)
 				}
 				qla2xxx_wake_dpc(vha);
 				ha->flags.isp82xx_fw_hung = 1;
-				if (ha->flags.mbox_busy) {
-					ha->flags.mbox_int = 1;
-					ql_log(ql_log_warn, vha, 0x6007,
-					    "Due to FW hung, doing "
-					    "premature completion of mbx "
-					    "command.\n");
-					if (test_bit(MBX_INTR_WAIT,
-					    &ha->mbx_cmd_flags))
-						complete(&ha->mbx_intr_comp);
-				}
+				ql_log(ql_log_warn, vha, 0x6007, "Firmware hung.\n");
+				qla82xx_clear_pending_mbx(vha);
 			}
 		}
 	}
@@ -4073,10 +4088,7 @@ qla82xx_chip_reset_cleanup(scsi_qla_host_t *vha)
 			msleep(1000);
 			if (qla82xx_check_fw_alive(vha)) {
 				ha->flags.isp82xx_fw_hung = 1;
-				if (ha->flags.mbox_busy) {
-					ha->flags.mbox_int = 1;
-					complete(&ha->mbx_intr_comp);
-				}
+				qla82xx_clear_pending_mbx(vha);
 				break;
 			}
 		}