diff options
author | Seokmann Ju <seokmann.ju@qlogic.com> | 2007-09-20 14:07:36 -0700 |
---|---|---|
committer | James Bottomley <jejb@mulgrave.localdomain> | 2007-10-12 14:49:47 -0400 |
commit | 14e660e677ddd3574247495aae4ef63eb8899072 (patch) | |
tree | fbf817d4e37887ae31ed46652f72440901c1f94b /drivers/scsi/qla2xxx/qla_os.c | |
parent | b7cc176c9eb3aa6989ac099efd8bdd6d0eaa784a (diff) |
[SCSI] qla2xxx: Add PCI error recovery support.
Additional cleanups and
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_os.c')
-rw-r--r-- | drivers/scsi/qla2xxx/qla_os.c | 114 |
1 files changed, 114 insertions, 0 deletions
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 2a03400b6f7..a8ab2d3447b 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -385,6 +385,11 @@ qla2x00_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) srb_t *sp; int rval; + if (unlikely(pci_channel_offline(ha->pdev))) { + cmd->result = DID_REQUEUE << 16; + goto qc_fail_command; + } + rval = fc_remote_port_chkready(rport); if (rval) { cmd->result = rval; @@ -447,6 +452,11 @@ qla24xx_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) int rval; scsi_qla_host_t *pha = to_qla_parent(ha); + if (unlikely(pci_channel_offline(ha->pdev))) { + cmd->result = DID_REQUEUE << 16; + goto qc24_fail_command; + } + rval = fc_remote_port_chkready(rport); if (rval) { cmd->result = rval; @@ -1571,6 +1581,10 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) if (pci_enable_device(pdev)) goto probe_out; + if (pci_find_aer_capability(pdev)) + if (pci_enable_pcie_error_reporting(pdev)) + goto probe_out; + sht = &qla2x00_driver_template; if (pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2422 || pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432 || @@ -2814,6 +2828,105 @@ qla2x00_release_firmware(void) up(&qla_fw_lock); } +static pci_ers_result_t +qla2xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state) +{ + switch (state) { + case pci_channel_io_normal: + return PCI_ERS_RESULT_CAN_RECOVER; + case pci_channel_io_frozen: + pci_disable_device(pdev); + return PCI_ERS_RESULT_NEED_RESET; + case pci_channel_io_perm_failure: + qla2x00_remove_one(pdev); + return PCI_ERS_RESULT_DISCONNECT; + } + return PCI_ERS_RESULT_NEED_RESET; +} + +static pci_ers_result_t +qla2xxx_pci_mmio_enabled(struct pci_dev *pdev) +{ + int risc_paused = 0; + uint32_t stat; + unsigned long flags; + scsi_qla_host_t *ha = pci_get_drvdata(pdev); + struct device_reg_2xxx __iomem *reg = &ha->iobase->isp; + struct device_reg_24xx __iomem *reg24 = &ha->iobase->isp24; + + spin_lock_irqsave(&ha->hardware_lock, flags); + if (IS_QLA2100(ha) || IS_QLA2200(ha)){ + stat = RD_REG_DWORD(®->hccr); + if (stat & HCCR_RISC_PAUSE) + risc_paused = 1; + } else if (IS_QLA23XX(ha)) { + stat = RD_REG_DWORD(®->u.isp2300.host_status); + if (stat & HSR_RISC_PAUSED) + risc_paused = 1; + } else if (IS_FWI2_CAPABLE(ha)) { + stat = RD_REG_DWORD(®24->host_status); + if (stat & HSRX_RISC_PAUSED) + risc_paused = 1; + } + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + if (risc_paused) { + qla_printk(KERN_INFO, ha, "RISC paused -- mmio_enabled, " + "Dumping firmware!\n"); + ha->isp_ops->fw_dump(ha, 0); + + return PCI_ERS_RESULT_NEED_RESET; + } else + return PCI_ERS_RESULT_RECOVERED; +} + +static pci_ers_result_t +qla2xxx_pci_slot_reset(struct pci_dev *pdev) +{ + pci_ers_result_t ret = PCI_ERS_RESULT_DISCONNECT; + scsi_qla_host_t *ha = pci_get_drvdata(pdev); + + if (pci_enable_device(pdev)) { + qla_printk(KERN_WARNING, ha, + "Can't re-enable PCI device after reset.\n"); + + return ret; + } + pci_set_master(pdev); + + if (ha->isp_ops->pci_config(ha)) + return ret; + + set_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags); + if (qla2x00_abort_isp(ha)== QLA_SUCCESS) + ret = PCI_ERS_RESULT_RECOVERED; + clear_bit(ABORT_ISP_ACTIVE, &ha->dpc_flags); + + return ret; +} + +static void +qla2xxx_pci_resume(struct pci_dev *pdev) +{ + scsi_qla_host_t *ha = pci_get_drvdata(pdev); + int ret; + + ret = qla2x00_wait_for_hba_online(ha); + if (ret != QLA_SUCCESS) { + qla_printk(KERN_ERR, ha, + "the device failed to resume I/O " + "from slot/link_reset"); + } + pci_cleanup_aer_uncorrect_error_status(pdev); +} + +static struct pci_error_handlers qla2xxx_err_handler = { + .error_detected = qla2xxx_pci_error_detected, + .mmio_enabled = qla2xxx_pci_mmio_enabled, + .slot_reset = qla2xxx_pci_slot_reset, + .resume = qla2xxx_pci_resume, +}; + static struct pci_device_id qla2xxx_pci_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2100) }, { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2200) }, @@ -2839,6 +2952,7 @@ static struct pci_driver qla2xxx_pci_driver = { .id_table = qla2xxx_pci_tbl, .probe = qla2x00_probe_one, .remove = __devexit_p(qla2x00_remove_one), + .err_handler = &qla2xxx_err_handler, }; /** |