summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qla4xxx
diff options
context:
space:
mode:
authorVikas Chaudhary <vikas.chaudhary@qlogic.com>2010-10-06 22:51:09 -0700
committerJames Bottomley <James.Bottomley@suse.de>2010-10-25 14:54:16 -0500
commitd64eab764aaf1455d4cd790e3651a2d65b69e661 (patch)
treecd48c552c788c31da19694a70f648b4682b0cc62 /drivers/scsi/qla4xxx
parent7b3595df0e064c8d85ddb6836aaa2af3956fb2ba (diff)
[SCSI] qla4xxx: remove unwanted check for bad spd
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Diffstat (limited to 'drivers/scsi/qla4xxx')
-rw-r--r--drivers/scsi/qla4xxx/ql4_nx.c17
-rw-r--r--drivers/scsi/qla4xxx/ql4_nx.h3
2 files changed, 0 insertions, 20 deletions
diff --git a/drivers/scsi/qla4xxx/ql4_nx.c b/drivers/scsi/qla4xxx/ql4_nx.c
index 74582cb46a2..474b10d7136 100644
--- a/drivers/scsi/qla4xxx/ql4_nx.c
+++ b/drivers/scsi/qla4xxx/ql4_nx.c
@@ -1081,21 +1081,6 @@ qla4_8xxx_pinit_from_rom(struct scsi_qla_host *ha, int verbose)
return 0;
}
-static int qla4_8xxx_check_for_bad_spd(struct scsi_qla_host *ha)
-{
- u32 val = 0;
- val = qla4_8xxx_rd_32(ha, BOOT_LOADER_DIMM_STATUS) ;
- val &= QLA82XX_BOOT_LOADER_MN_ISSUE;
- if (val & QLA82XX_PEG_TUNE_MN_SPD_ZEROED) {
- printk("Memory DIMM SPD not programmed. Assumed valid.\n");
- return 1;
- } else if (val) {
- printk("Memory DIMM type incorrect. Info:%08X.\n", val);
- return 2;
- }
- return 0;
-}
-
static int
qla4_8xxx_load_from_flash(struct scsi_qla_host *ha, uint32_t image_start)
{
@@ -1380,8 +1365,6 @@ static int qla4_8xxx_cmdpeg_ready(struct scsi_qla_host *ha, int pegtune_val)
} while (--retries);
- qla4_8xxx_check_for_bad_spd(ha);
-
if (!retries) {
pegtune_val = qla4_8xxx_rd_32(ha,
QLA82XX_ROMUSB_GLB_PEGTUNE_DONE);
diff --git a/drivers/scsi/qla4xxx/ql4_nx.h b/drivers/scsi/qla4xxx/ql4_nx.h
index 95f3060ad02..ff689bf5300 100644
--- a/drivers/scsi/qla4xxx/ql4_nx.h
+++ b/drivers/scsi/qla4xxx/ql4_nx.h
@@ -24,7 +24,6 @@
#define CRB_CMDPEG_STATE QLA82XX_REG(0x50)
#define CRB_RCVPEG_STATE QLA82XX_REG(0x13c)
-#define BOOT_LOADER_DIMM_STATUS QLA82XX_REG(0x54)
#define CRB_DMA_SHIFT QLA82XX_REG(0xcc)
#define QLA82XX_HW_H0_CH_HUB_ADR 0x05
@@ -529,8 +528,6 @@
# define QLA82XX_CAM_RAM_BASE (QLA82XX_CRB_CAM + 0x02000)
# define QLA82XX_CAM_RAM(reg) (QLA82XX_CAM_RAM_BASE + (reg))
-#define QLA82XX_PEG_TUNE_MN_SPD_ZEROED 0x80000000
-#define QLA82XX_BOOT_LOADER_MN_ISSUE 0xff00ffff
#define QLA82XX_PORT_MODE_ADDR (QLA82XX_CAM_RAM(0x24))
#define QLA82XX_PEG_HALT_STATUS1 (QLA82XX_CAM_RAM(0xa8))
#define QLA82XX_PEG_HALT_STATUS2 (QLA82XX_CAM_RAM(0xac))