Merge branch 'master' into for-next

Conflicts:
	MAINTAINERS
	arch/arm/mach-omap2/pm24xx.c
	drivers/scsi/bfa/bfa_fcpim.c

Needed to update to apply fixes for which the old branch was too
outdated.

12 files changed, 255 insertions, 129 deletions

diff --git a/drivers/scsi/qla4xxx/ql4_dbg.c b/drivers/scsi/qla4xxx/ql4_dbg.c
index cbceb0ebabf..edcf048215d 100644
--- a/drivers/scsi/qla4xxx/ql4_dbg.c
+++ b/drivers/scsi/qla4xxx/ql4_dbg.c
@@ -30,3 +30,104 @@ void qla4xxx_dump_buffer(void *b, uint32_t size)
 	printk(KERN_INFO "\n");
 }
 
+void qla4xxx_dump_registers(struct scsi_qla_host *ha)
+{
+	uint8_t i;
+
+	if (is_qla8022(ha)) {
+		for (i = 1; i < MBOX_REG_COUNT; i++)
+			printk(KERN_INFO "mailbox[%d]     = 0x%08X\n",
+			    i, readl(&ha->qla4_8xxx_reg->mailbox_in[i]));
+		return;
+	}
+
+	for (i = 0; i < MBOX_REG_COUNT; i++) {
+		printk(KERN_INFO "0x%02X mailbox[%d]      = 0x%08X\n",
+		    (uint8_t) offsetof(struct isp_reg, mailbox[i]), i,
+		    readw(&ha->reg->mailbox[i]));
+	}
+
+	printk(KERN_INFO "0x%02X flash_address            = 0x%08X\n",
+	    (uint8_t) offsetof(struct isp_reg, flash_address),
+	    readw(&ha->reg->flash_address));
+	printk(KERN_INFO "0x%02X flash_data               = 0x%08X\n",
+	    (uint8_t) offsetof(struct isp_reg, flash_data),
+	    readw(&ha->reg->flash_data));
+	printk(KERN_INFO "0x%02X ctrl_status              = 0x%08X\n",
+	    (uint8_t) offsetof(struct isp_reg, ctrl_status),
+	    readw(&ha->reg->ctrl_status));
+
+	if (is_qla4010(ha)) {
+		printk(KERN_INFO "0x%02X nvram            = 0x%08X\n",
+		    (uint8_t) offsetof(struct isp_reg, u1.isp4010.nvram),
+		    readw(&ha->reg->u1.isp4010.nvram));
+	} else if (is_qla4022(ha) | is_qla4032(ha)) {
+		printk(KERN_INFO "0x%02X intr_mask        = 0x%08X\n",
+		    (uint8_t) offsetof(struct isp_reg, u1.isp4022.intr_mask),
+		    readw(&ha->reg->u1.isp4022.intr_mask));
+		printk(KERN_INFO "0x%02X nvram            = 0x%08X\n",
+		    (uint8_t) offsetof(struct isp_reg, u1.isp4022.nvram),
+		    readw(&ha->reg->u1.isp4022.nvram));
+		printk(KERN_INFO "0x%02X semaphore	  = 0x%08X\n",
+		    (uint8_t) offsetof(struct isp_reg, u1.isp4022.semaphore),
+		    readw(&ha->reg->u1.isp4022.semaphore));
+	}
+	printk(KERN_INFO "0x%02X req_q_in                 = 0x%08X\n",
+	    (uint8_t) offsetof(struct isp_reg, req_q_in),
+	    readw(&ha->reg->req_q_in));
+	printk(KERN_INFO "0x%02X rsp_q_out                = 0x%08X\n",
+	    (uint8_t) offsetof(struct isp_reg, rsp_q_out),
+	    readw(&ha->reg->rsp_q_out));
+
+	if (is_qla4010(ha)) {
+		printk(KERN_INFO "0x%02X ext_hw_conf      = 0x%08X\n",
+		    (uint8_t) offsetof(struct isp_reg, u2.isp4010.ext_hw_conf),
+		    readw(&ha->reg->u2.isp4010.ext_hw_conf));
+		printk(KERN_INFO "0x%02X port_ctrl        = 0x%08X\n",
+		    (uint8_t) offsetof(struct isp_reg, u2.isp4010.port_ctrl),
+		    readw(&ha->reg->u2.isp4010.port_ctrl));
+		printk(KERN_INFO "0x%02X port_status      = 0x%08X\n",
+		    (uint8_t) offsetof(struct isp_reg, u2.isp4010.port_status),
+		    readw(&ha->reg->u2.isp4010.port_status));
+		printk(KERN_INFO "0x%02X req_q_out        = 0x%08X\n",
+		    (uint8_t) offsetof(struct isp_reg, u2.isp4010.req_q_out),
+		    readw(&ha->reg->u2.isp4010.req_q_out));
+		printk(KERN_INFO "0x%02X gp_out           = 0x%08X\n",
+		    (uint8_t) offsetof(struct isp_reg, u2.isp4010.gp_out),
+		    readw(&ha->reg->u2.isp4010.gp_out));
+		printk(KERN_INFO "0x%02X gp_in	          = 0x%08X\n",
+		    (uint8_t) offsetof(struct isp_reg, u2.isp4010.gp_in),
+		    readw(&ha->reg->u2.isp4010.gp_in));
+		printk(KERN_INFO "0x%02X port_err_status  = 0x%08X\n", (uint8_t)
+		    offsetof(struct isp_reg, u2.isp4010.port_err_status),
+		    readw(&ha->reg->u2.isp4010.port_err_status));
+	} else if (is_qla4022(ha) | is_qla4032(ha)) {
+		printk(KERN_INFO "Page 0 Registers:\n");
+		printk(KERN_INFO "0x%02X ext_hw_conf      = 0x%08X\n", (uint8_t)
+		    offsetof(struct isp_reg, u2.isp4022.p0.ext_hw_conf),
+		    readw(&ha->reg->u2.isp4022.p0.ext_hw_conf));
+		printk(KERN_INFO "0x%02X port_ctrl        = 0x%08X\n", (uint8_t)
+		    offsetof(struct isp_reg, u2.isp4022.p0.port_ctrl),
+		    readw(&ha->reg->u2.isp4022.p0.port_ctrl));
+		printk(KERN_INFO "0x%02X port_status      = 0x%08X\n", (uint8_t)
+		    offsetof(struct isp_reg, u2.isp4022.p0.port_status),
+		    readw(&ha->reg->u2.isp4022.p0.port_status));
+		printk(KERN_INFO "0x%02X gp_out           = 0x%08X\n",
+		    (uint8_t) offsetof(struct isp_reg, u2.isp4022.p0.gp_out),
+		    readw(&ha->reg->u2.isp4022.p0.gp_out));
+		printk(KERN_INFO "0x%02X gp_in            = 0x%08X\n",
+		    (uint8_t) offsetof(struct isp_reg, u2.isp4022.p0.gp_in),
+		    readw(&ha->reg->u2.isp4022.p0.gp_in));
+		printk(KERN_INFO "0x%02X port_err_status  = 0x%08X\n", (uint8_t)
+		    offsetof(struct isp_reg, u2.isp4022.p0.port_err_status),
+		    readw(&ha->reg->u2.isp4022.p0.port_err_status));
+		printk(KERN_INFO "Page 1 Registers:\n");
+		writel(HOST_MEM_CFG_PAGE & set_rmask(CSR_SCSI_PAGE_SELECT),
+		    &ha->reg->ctrl_status);
+		printk(KERN_INFO "0x%02X req_q_out        = 0x%08X\n",
+		    (uint8_t) offsetof(struct isp_reg, u2.isp4022.p1.req_q_out),
+		    readw(&ha->reg->u2.isp4022.p1.req_q_out));
+		writel(PORT_CTRL_STAT_PAGE & set_rmask(CSR_SCSI_PAGE_SELECT),
+		    &ha->reg->ctrl_status);
+	}
+}
diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h
index 9dc0a6616ed..0f3bfc3da5c 100644
--- a/drivers/scsi/qla4xxx/ql4_def.h
+++ b/drivers/scsi/qla4xxx/ql4_def.h
@@ -24,6 +24,7 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/mutex.h>
+#include <linux/aer.h>
 
 #include <net/tcp.h>
 #include <scsi/scsi.h>
@@ -36,24 +37,6 @@
 #include "ql4_dbg.h"
 #include "ql4_nx.h"
 
-#if defined(CONFIG_PCIEAER)
-#include <linux/aer.h>
-#else
-/* AER releated */
-static inline int pci_enable_pcie_error_reporting(struct pci_dev *dev)
-{
-	return -EINVAL;
-}
-static inline int pci_disable_pcie_error_reporting(struct pci_dev *dev)
-{
-	return -EINVAL;
-}
-static inline int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev)
-{
-	return -EINVAL;
-}
-#endif
-
 #ifndef PCI_DEVICE_ID_QLOGIC_ISP4010
 #define PCI_DEVICE_ID_QLOGIC_ISP4010	0x4010
 #endif
@@ -179,6 +162,7 @@ static inline int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev)
 #define IOCB_TOV_MARGIN			10
 #define RELOGIN_TOV			18
 #define ISNS_DEREG_TOV			5
+#define HBA_ONLINE_TOV			30
 
 #define MAX_RESET_HA_RETRIES		2
 
diff --git a/drivers/scsi/qla4xxx/ql4_fw.h b/drivers/scsi/qla4xxx/ql4_fw.h
index 0336c6db8cb..5e757d7fff7 100644
--- a/drivers/scsi/qla4xxx/ql4_fw.h
+++ b/drivers/scsi/qla4xxx/ql4_fw.h
@@ -416,6 +416,8 @@ struct qla_flt_region {
 #define MBOX_ASTS_IPV6_ND_PREFIX_IGNORED	0x802C
 #define MBOX_ASTS_IPV6_LCL_PREFIX_IGNORED	0x802D
 #define MBOX_ASTS_ICMPV6_ERROR_MSG_RCVD		0x802E
+#define MBOX_ASTS_TXSCVR_INSERTED		0x8130
+#define MBOX_ASTS_TXSCVR_REMOVED		0x8131
 
 #define ISNS_EVENT_DATA_RECEIVED		0x0000
 #define ISNS_EVENT_CONNECTION_OPENED		0x0001
@@ -446,6 +448,7 @@ struct addr_ctrl_blk {
 #define	 FWOPT_SESSION_MODE		  0x0040
 #define	 FWOPT_INITIATOR_MODE		  0x0020
 #define	 FWOPT_TARGET_MODE		  0x0010
+#define	 FWOPT_ENABLE_CRBDB		  0x8000
 
 	uint16_t exec_throttle;	/* 04-05 */
 	uint8_t zio_count;	/* 06 */
diff --git a/drivers/scsi/qla4xxx/ql4_glbl.h b/drivers/scsi/qla4xxx/ql4_glbl.h
index 95a26fb1626..6575a47501e 100644
--- a/drivers/scsi/qla4xxx/ql4_glbl.h
+++ b/drivers/scsi/qla4xxx/ql4_glbl.h
@@ -94,6 +94,7 @@ void qla4xxx_process_response_queue(struct scsi_qla_host *ha);
 void qla4xxx_wake_dpc(struct scsi_qla_host *ha);
 void qla4xxx_get_conn_event_log(struct scsi_qla_host *ha);
 void qla4xxx_mailbox_premature_completion(struct scsi_qla_host *ha);
+void qla4xxx_dump_registers(struct scsi_qla_host *ha);
 
 void qla4_8xxx_pci_config(struct scsi_qla_host *);
 int qla4_8xxx_iospace_config(struct scsi_qla_host *ha);
diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
index 4c9be77ee70..dc01fa3da5d 100644
--- a/drivers/scsi/qla4xxx/ql4_init.c
+++ b/drivers/scsi/qla4xxx/ql4_init.c
@@ -1207,8 +1207,8 @@ static int qla4xxx_start_firmware_from_flash(struct scsi_qla_host *ha)
 			break;
 
 		DEBUG2(printk(KERN_INFO "scsi%ld: %s: Waiting for boot "
-			      "firmware to complete... ctrl_sts=0x%x\n",
-			      ha->host_no, __func__, ctrl_status));
+		    "firmware to complete... ctrl_sts=0x%x, remaining=%ld\n",
+		    ha->host_no, __func__, ctrl_status, max_wait_time));
 
 		msleep_interruptible(250);
 	} while (!time_after_eq(jiffies, max_wait_time));
@@ -1459,6 +1459,12 @@ int qla4xxx_initialize_adapter(struct scsi_qla_host *ha,
 exit_init_online:
 	set_bit(AF_ONLINE, &ha->flags);
 exit_init_hba:
+	if (is_qla8022(ha) && (status == QLA_ERROR)) {
+		/* Since interrupts are registered in start_firmware for
+		 * 82xx, release them here if initialize_adapter fails */
+		qla4xxx_free_irqs(ha);
+	}
+
 	DEBUG2(printk("scsi%ld: initialize adapter: %s\n", ha->host_no,
 	    status == QLA_ERROR ? "FAILED" : "SUCCEDED"));
 	return status;
diff --git a/drivers/scsi/qla4xxx/ql4_iocb.c b/drivers/scsi/qla4xxx/ql4_iocb.c
index 4ef9ba112ee..5ae49fd8784 100644
--- a/drivers/scsi/qla4xxx/ql4_iocb.c
+++ b/drivers/scsi/qla4xxx/ql4_iocb.c
@@ -202,19 +202,11 @@ static void qla4xxx_build_scsi_iocbs(struct srb *srb,
 void qla4_8xxx_queue_iocb(struct scsi_qla_host *ha)
 {
 	uint32_t dbval = 0;
-	unsigned long wtime;
 
 	dbval = 0x14 | (ha->func_num << 5);
 	dbval = dbval | (0 << 8) | (ha->request_in << 16);
-	writel(dbval, (unsigned long __iomem *)ha->nx_db_wr_ptr);
-	wmb();
 
-	wtime = jiffies + (2 * HZ);
-	while (readl((void __iomem *)ha->nx_db_rd_ptr) != dbval &&
-	    !time_after_eq(jiffies, wtime)) {
-		writel(dbval, (unsigned long __iomem *)ha->nx_db_wr_ptr);
-		wmb();
-	}
+	qla4_8xxx_wr_32(ha, ha->nx_db_wr_ptr, ha->request_in);
 }
 
 /**
diff --git a/drivers/scsi/qla4xxx/ql4_isr.c b/drivers/scsi/qla4xxx/ql4_isr.c
index 2a1ab63f3eb..7c33fd5943d 100644
--- a/drivers/scsi/qla4xxx/ql4_isr.c
+++ b/drivers/scsi/qla4xxx/ql4_isr.c
@@ -72,7 +72,7 @@ qla4xxx_status_cont_entry(struct scsi_qla_host *ha,
 {
 	struct srb *srb = ha->status_srb;
 	struct scsi_cmnd *cmd;
-	uint8_t sense_len;
+	uint16_t sense_len;
 
 	if (srb == NULL)
 		return;
@@ -487,6 +487,8 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha,
 		case MBOX_ASTS_SYSTEM_ERROR:
 			/* Log Mailbox registers */
 			ql4_printk(KERN_INFO, ha, "%s: System Err\n", __func__);
+			qla4xxx_dump_registers(ha);
+
 			if (ql4xdontresethba) {
 				DEBUG2(printk("scsi%ld: %s:Don't Reset HBA\n",
 				    ha->host_no, __func__));
@@ -621,6 +623,18 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha,
 			}
 			break;
 
+		case MBOX_ASTS_TXSCVR_INSERTED:
+			DEBUG2(printk(KERN_WARNING
+			    "scsi%ld: AEN %04x Transceiver"
+			    " inserted\n",  ha->host_no, mbox_sts[0]));
+			break;
+
+		case MBOX_ASTS_TXSCVR_REMOVED:
+			DEBUG2(printk(KERN_WARNING
+			    "scsi%ld: AEN %04x Transceiver"
+			    " removed\n",  ha->host_no, mbox_sts[0]));
+			break;
+
 		default:
 			DEBUG2(printk(KERN_WARNING
 				      "scsi%ld: AEN %04x UNKNOWN\n",
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index 90021704d8c..2d2f9c879bf 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -299,6 +299,10 @@ qla4xxx_set_ifcb(struct scsi_qla_host *ha, uint32_t *mbox_cmd,
 {
 	memset(mbox_cmd, 0, sizeof(mbox_cmd[0]) * MBOX_REG_COUNT);
 	memset(mbox_sts, 0, sizeof(mbox_sts[0]) * MBOX_REG_COUNT);
+
+	if (is_qla8022(ha))
+		qla4_8xxx_wr_32(ha, ha->nx_db_wr_ptr, 0);
+
 	mbox_cmd[0] = MBOX_CMD_INITIALIZE_FIRMWARE;
 	mbox_cmd[1] = 0;
 	mbox_cmd[2] = LSDW(init_fw_cb_dma);
@@ -472,6 +476,11 @@ int qla4xxx_initialize_fw_cb(struct scsi_qla_host * ha)
 	init_fw_cb->fw_options |=
 		__constant_cpu_to_le16(FWOPT_SESSION_MODE |
 				       FWOPT_INITIATOR_MODE);
+
+	if (is_qla8022(ha))
+		init_fw_cb->fw_options |=
+		    __constant_cpu_to_le16(FWOPT_ENABLE_CRBDB);
+
 	init_fw_cb->fw_options &= __constant_cpu_to_le16(~FWOPT_TARGET_MODE);
 
 	if (qla4xxx_set_ifcb(ha, &mbox_cmd[0], &mbox_sts[0], init_fw_cb_dma)
@@ -592,7 +601,7 @@ int qla4xxx_get_firmware_status(struct scsi_qla_host * ha)
 	}
 
 	ql4_printk(KERN_INFO, ha, "%ld firmare IOCBs available (%d).\n",
-	    ha->host_no, mbox_cmd[2]);
+	    ha->host_no, mbox_sts[2]);
 
 	return QLA_SUCCESS;
 }
diff --git a/drivers/scsi/qla4xxx/ql4_nx.c b/drivers/scsi/qla4xxx/ql4_nx.c
index 449256f2c5f..474b10d7136 100644
--- a/drivers/scsi/qla4xxx/ql4_nx.c
+++ b/drivers/scsi/qla4xxx/ql4_nx.c
@@ -839,8 +839,11 @@ qla4_8xxx_rom_lock(struct scsi_qla_host *ha)
 		done = qla4_8xxx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_LOCK));
 		if (done == 1)
 			break;
-		if (timeout >= qla4_8xxx_rom_lock_timeout)
+		if (timeout >= qla4_8xxx_rom_lock_timeout) {
+			ql4_printk(KERN_WARNING, ha,
+			    "%s: Failed to acquire rom lock", __func__);
 			return -1;
+		}
 
 		timeout++;
 
@@ -1078,21 +1081,6 @@ qla4_8xxx_pinit_from_rom(struct scsi_qla_host *ha, int verbose)
 	return 0;
 }
 
-static int qla4_8xxx_check_for_bad_spd(struct scsi_qla_host *ha)
-{
-	u32 val = 0;
-	val = qla4_8xxx_rd_32(ha, BOOT_LOADER_DIMM_STATUS) ;
-	val &= QLA82XX_BOOT_LOADER_MN_ISSUE;
-	if (val & QLA82XX_PEG_TUNE_MN_SPD_ZEROED) {
-		printk("Memory DIMM SPD not programmed.  Assumed valid.\n");
-		return 1;
-	} else if (val) {
-		printk("Memory DIMM type incorrect.  Info:%08X.\n", val);
-		return 2;
-	}
-	return 0;
-}
-
 static int
 qla4_8xxx_load_from_flash(struct scsi_qla_host *ha, uint32_t image_start)
 {
@@ -1377,8 +1365,6 @@ static int qla4_8xxx_cmdpeg_ready(struct scsi_qla_host *ha, int pegtune_val)
 
 		} while (--retries);
 
-		qla4_8xxx_check_for_bad_spd(ha);
-
 		if (!retries) {
 			pegtune_val = qla4_8xxx_rd_32(ha,
 				QLA82XX_ROMUSB_GLB_PEGTUNE_DONE);
@@ -1540,14 +1526,31 @@ qla4_8xxx_try_start_fw(struct scsi_qla_host *ha)
 	ql4_printk(KERN_INFO, ha,
 	    "FW: Attempting to load firmware from flash...\n");
 	rval = qla4_8xxx_start_firmware(ha, ha->hw.flt_region_fw);
-	if (rval == QLA_SUCCESS)
-		return rval;
 
-	ql4_printk(KERN_ERR, ha, "FW: Load firmware from flash FAILED...\n");
+	if (rval != QLA_SUCCESS) {
+		ql4_printk(KERN_ERR, ha, "FW: Load firmware from flash"
+		    " FAILED...\n");
+		return rval;
+	}
 
 	return rval;
 }
 
+static void qla4_8xxx_rom_lock_recovery(struct scsi_qla_host *ha)
+{
+	if (qla4_8xxx_rom_lock(ha)) {
+		/* Someone else is holding the lock. */
+		dev_info(&ha->pdev->dev, "Resetting rom_lock\n");
+	}
+
+	/*
+	 * Either we got the lock, or someone
+	 * else died while holding it.
+	 * In either case, unlock.
+	 */
+	qla4_8xxx_rom_unlock(ha);
+}
+
 /**
  * qla4_8xxx_device_bootstrap - Initialize device, set DEV_READY, start fw
  * @ha: pointer to adapter structure
@@ -1557,11 +1560,12 @@ qla4_8xxx_try_start_fw(struct scsi_qla_host *ha)
 static int
 qla4_8xxx_device_bootstrap(struct scsi_qla_host *ha)
 {
-	int rval, i, timeout;
+	int rval = QLA_ERROR;
+	int i, timeout;
 	uint32_t old_count, count;
+	int need_reset = 0, peg_stuck = 1;
 
-	if (qla4_8xxx_need_reset(ha))
-		goto dev_initialize;
+	need_reset = qla4_8xxx_need_reset(ha);
 
 	old_count = qla4_8xxx_rd_32(ha, QLA82XX_PEG_ALIVE_COUNTER);
 
@@ -1570,12 +1574,30 @@ qla4_8xxx_device_bootstrap(struct scsi_qla_host *ha)
 		if (timeout) {
 			qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
 			   QLA82XX_DEV_FAILED);
-			return QLA_ERROR;
+			return rval;
 		}
 
 		count = qla4_8xxx_rd_32(ha, QLA82XX_PEG_ALIVE_COUNTER);
 		if (count != old_count)
+			peg_stuck = 0;
+	}
+
+	if (need_reset) {
+		/* We are trying to perform a recovery here. */
+		if (peg_stuck)
+			qla4_8xxx_rom_lock_recovery(ha);
+		goto dev_initialize;
+	} else  {
+		/* Start of day for this ha context. */
+		if (peg_stuck) {
+			/* Either we are the first or recovery in progress. */
+			qla4_8xxx_rom_lock_recovery(ha);
+			goto dev_initialize;
+		} else {
+			/* Firmware already running. */
+			rval = QLA_SUCCESS;
 			goto dev_ready;
+		}
 	}
 
 dev_initialize:
@@ -1601,7 +1623,7 @@ dev_ready:
 	ql4_printk(KERN_INFO, ha, "HW State: READY\n");
 	qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE, QLA82XX_DEV_READY);
 
-	return QLA_SUCCESS;
+	return rval;
 }
 
 /**
@@ -1764,20 +1786,9 @@ int qla4_8xxx_load_risc(struct scsi_qla_host *ha)
 	int retval;
 	retval = qla4_8xxx_device_state_handler(ha);
 
-	if (retval == QLA_SUCCESS &&
-	    !test_bit(AF_INIT_DONE, &ha->flags)) {
+	if (retval == QLA_SUCCESS && !test_bit(AF_INIT_DONE, &ha->flags))
 		retval = qla4xxx_request_irqs(ha);
-		if (retval != QLA_SUCCESS) {
-			ql4_printk(KERN_WARNING, ha,
-			    "Failed to reserve interrupt %d already in use.\n",
-			    ha->pdev->irq);
-		} else {
-			set_bit(AF_IRQ_ATTACHED, &ha->flags);
-			ha->host->irq = ha->pdev->irq;
-			ql4_printk(KERN_INFO, ha, "%s: irq %d attached\n",
-			    __func__, ha->pdev->irq);
-		}
-	}
+
 	return retval;
 }
 
diff --git a/drivers/scsi/qla4xxx/ql4_nx.h b/drivers/scsi/qla4xxx/ql4_nx.h
index 931ad3f1e91..ff689bf5300 100644
--- a/drivers/scsi/qla4xxx/ql4_nx.h
+++ b/drivers/scsi/qla4xxx/ql4_nx.h
@@ -24,7 +24,6 @@
 
 #define CRB_CMDPEG_STATE		QLA82XX_REG(0x50)
 #define CRB_RCVPEG_STATE		QLA82XX_REG(0x13c)
-#define BOOT_LOADER_DIMM_STATUS		QLA82XX_REG(0x54)
 #define CRB_DMA_SHIFT			QLA82XX_REG(0xcc)
 
 #define QLA82XX_HW_H0_CH_HUB_ADR	0x05
@@ -529,12 +528,12 @@
 # define QLA82XX_CAM_RAM_BASE	(QLA82XX_CRB_CAM + 0x02000)
 # define QLA82XX_CAM_RAM(reg)	(QLA82XX_CAM_RAM_BASE + (reg))
 
-#define QLA82XX_PEG_TUNE_MN_SPD_ZEROED	0x80000000
-#define QLA82XX_BOOT_LOADER_MN_ISSUE	0xff00ffff
 #define QLA82XX_PORT_MODE_ADDR		(QLA82XX_CAM_RAM(0x24))
 #define QLA82XX_PEG_HALT_STATUS1	(QLA82XX_CAM_RAM(0xa8))
 #define QLA82XX_PEG_HALT_STATUS2	(QLA82XX_CAM_RAM(0xac))
 #define QLA82XX_PEG_ALIVE_COUNTER	(QLA82XX_CAM_RAM(0xb0))
+#define QLA82XX_CAM_RAM_DB1		(QLA82XX_CAM_RAM(0x1b0))
+#define QLA82XX_CAM_RAM_DB2		(QLA82XX_CAM_RAM(0x1b4))
 
 #define HALT_STATUS_UNRECOVERABLE	0x80000000
 #define HALT_STATUS_RECOVERABLE		0x40000000
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index 370d40ff152..0d48fb4d104 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -79,8 +79,7 @@ static enum blk_eh_timer_return qla4xxx_eh_cmd_timed_out(struct scsi_cmnd *sc);
 /*
  * SCSI host template entry points
  */
-static int qla4xxx_queuecommand(struct scsi_cmnd *cmd,
-				void (*done) (struct scsi_cmnd *));
+static int qla4xxx_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *cmd);
 static int qla4xxx_eh_abort(struct scsi_cmnd *cmd);
 static int qla4xxx_eh_device_reset(struct scsi_cmnd *cmd);
 static int qla4xxx_eh_target_reset(struct scsi_cmnd *cmd);
@@ -167,8 +166,6 @@ static void qla4xxx_recovery_timedout(struct iscsi_cls_session *session)
 			      "of (%d) secs exhausted, marking device DEAD.\n",
 			      ha->host_no, __func__, ddb_entry->fw_ddb_index,
 			      QL4_SESS_RECOVERY_TMO));
-
-		qla4xxx_wake_dpc(ha);
 	}
 }
 
@@ -466,7 +463,7 @@ void qla4xxx_srb_compl(struct kref *ref)
  * completion handling).   Unfortunely, it sometimes calls the scheduler
  * in interrupt context which is a big NO! NO!.
  **/
-static int qla4xxx_queuecommand(struct scsi_cmnd *cmd,
+static int qla4xxx_queuecommand_lck(struct scsi_cmnd *cmd,
 				void (*done)(struct scsi_cmnd *))
 {
 	struct scsi_qla_host *ha = to_qla_host(cmd->device->host);
@@ -540,6 +537,8 @@ qc_fail_command:
 	return 0;
 }
 
+static DEF_SCSI_QCMD(qla4xxx_queuecommand)
+
 /**
  * qla4xxx_mem_free - frees memory allocated to adapter
  * @ha: Pointer to host adapter structure.
@@ -573,10 +572,6 @@ static void qla4xxx_mem_free(struct scsi_qla_host *ha)
 		if (ha->nx_pcibase)
 			iounmap(
 			    (struct device_reg_82xx __iomem *)ha->nx_pcibase);
-
-		if (ha->nx_db_wr_ptr)
-			iounmap(
-			    (struct device_reg_82xx __iomem *)ha->nx_db_wr_ptr);
 	} else if (ha->reg)
 		iounmap(ha->reg);
 	pci_release_regions(ha->pdev);
@@ -692,7 +687,9 @@ static void qla4_8xxx_check_fw_alive(struct scsi_qla_host *ha)
 			qla4xxx_wake_dpc(ha);
 			qla4xxx_mailbox_premature_completion(ha);
 		}
-	}
+	} else
+		ha->seconds_since_last_heartbeat = 0;
+
 	ha->fw_heartbeat_counter = fw_heartbeat_counter;
 }
 
@@ -885,7 +882,13 @@ static int qla4xxx_cmd_wait(struct scsi_qla_host *ha)
 		/* Find a command that hasn't completed. */
 		for (index = 0; index < ha->host->can_queue; index++) {
 			cmd = scsi_host_find_tag(ha->host, index);
-			if (cmd != NULL)
+			/*
+			 * We cannot just check if the index is valid,
+			 * becase if we are run from the scsi eh, then
+			 * the scsi/block layer is going to prevent
+			 * the tag from being released.
+			 */
+			if (cmd != NULL && CMD_SP(cmd))
 				break;
 		}
 		spin_unlock_irqrestore(&ha->hardware_lock, flags);
@@ -937,11 +940,14 @@ int qla4xxx_soft_reset(struct scsi_qla_host *ha)
 {
 	uint32_t max_wait_time;
 	unsigned long flags = 0;
-	int status = QLA_ERROR;
+	int status;
 	uint32_t ctrl_status;
 
-	qla4xxx_hw_reset(ha);
+	status = qla4xxx_hw_reset(ha);
+	if (status != QLA_SUCCESS)
+		return status;
 
+	status = QLA_ERROR;
 	/* Wait until the Network Reset Intr bit is cleared */
 	max_wait_time = RESET_INTR_TOV;
 	do {
@@ -1101,7 +1107,8 @@ static int qla4xxx_recover_adapter(struct scsi_qla_host *ha)
 		    ha->host_no, __func__));
 		status = ha->isp_ops->reset_firmware(ha);
 		if (status == QLA_SUCCESS) {
-			qla4xxx_cmd_wait(ha);
+			if (!test_bit(AF_FW_RECOVERY, &ha->flags))
+				qla4xxx_cmd_wait(ha);
 			ha->isp_ops->disable_intrs(ha);
 			qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS);
 			qla4xxx_abort_active_cmds(ha, DID_RESET << 16);
@@ -1118,7 +1125,8 @@ static int qla4xxx_recover_adapter(struct scsi_qla_host *ha)
 	 * or if stop_firmware fails for ISP-82xx.
 	 * This is the default case for ISP-4xxx */
 	if (!is_qla8022(ha) || reset_chip) {
-		qla4xxx_cmd_wait(ha);
+		if (!test_bit(AF_FW_RECOVERY, &ha->flags))
+			qla4xxx_cmd_wait(ha);
 		qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS);
 		qla4xxx_abort_active_cmds(ha, DID_RESET << 16);
 		DEBUG2(ql4_printk(KERN_INFO, ha,
@@ -1471,24 +1479,10 @@ int qla4_8xxx_iospace_config(struct scsi_qla_host *ha)
 	db_base = pci_resource_start(pdev, 4);  /* doorbell is on bar 4 */
 	db_len = pci_resource_len(pdev, 4);
 
-	/* mapping of doorbell write pointer */
-	ha->nx_db_wr_ptr = (unsigned long)ioremap(db_base +
-	    (ha->pdev->devfn << 12), 4);
-	if (!ha->nx_db_wr_ptr) {
-		printk(KERN_ERR
-		    "cannot remap MMIO doorbell-write (%s), aborting\n",
-		    pci_name(pdev));
-		goto iospace_error_exit;
-	}
-	/* mapping of doorbell read pointer */
-	ha->nx_db_rd_ptr = (uint8_t *) ha->nx_pcibase + (512 * 1024) +
-	    (ha->pdev->devfn * 8);
-	if (!ha->nx_db_rd_ptr)
-		printk(KERN_ERR
-		    "cannot remap MMIO doorbell-read (%s), aborting\n",
-		    pci_name(pdev));
-	return 0;
+	ha->nx_db_wr_ptr = (ha->pdev->devfn == 4 ? QLA82XX_CAM_RAM_DB1 :
+	    QLA82XX_CAM_RAM_DB2);
 
+	return 0;
 iospace_error_exit:
 	return -ENOMEM;
 }
@@ -1960,13 +1954,11 @@ static int qla4xxx_wait_for_hba_online(struct scsi_qla_host *ha)
 {
 	unsigned long wait_online;
 
-	wait_online = jiffies + (30 * HZ);
+	wait_online = jiffies + (HBA_ONLINE_TOV * HZ);
 	while (time_before(jiffies, wait_online)) {
 
 		if (adapter_up(ha))
 			return QLA_SUCCESS;
-		else if (ha->retry_reset_ha_cnt == 0)
-			return QLA_ERROR;
 
 		msleep(2000);
 	}
@@ -2021,6 +2013,7 @@ static int qla4xxx_eh_abort(struct scsi_cmnd *cmd)
 	unsigned int id = cmd->device->id;
 	unsigned int lun = cmd->device->lun;
 	unsigned long serial = cmd->serial_number;
+	unsigned long flags;
 	struct srb *srb = NULL;
 	int ret = SUCCESS;
 	int wait = 0;
@@ -2029,12 +2022,14 @@ static int qla4xxx_eh_abort(struct scsi_cmnd *cmd)
 	    "scsi%ld:%d:%d: Abort command issued cmd=%p, pid=%ld\n",
 	    ha->host_no, id, lun, cmd, serial);
 
+	spin_lock_irqsave(&ha->hardware_lock, flags);
 	srb = (struct srb *) CMD_SP(cmd);
-
-	if (!srb)
+	if (!srb) {
+		spin_unlock_irqrestore(&ha->hardware_lock, flags);
 		return SUCCESS;
-
+	}
 	kref_get(&srb->srb_ref);
+	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 
 	if (qla4xxx_abort_task(ha, srb) != QLA_SUCCESS) {
 		DEBUG3(printk("scsi%ld:%d:%d: Abort_task mbx failed.\n",
@@ -2267,6 +2262,8 @@ qla4xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
 		qla4xxx_mailbox_premature_completion(ha);
 		qla4xxx_free_irqs(ha);
 		pci_disable_device(pdev);
+		/* Return back all IOs */
+		qla4xxx_abort_active_cmds(ha, DID_RESET << 16);
 		return PCI_ERS_RESULT_NEED_RESET;
 	case pci_channel_io_perm_failure:
 		set_bit(AF_EEH_BUSY, &ha->flags);
@@ -2290,17 +2287,13 @@ qla4xxx_pci_mmio_enabled(struct pci_dev *pdev)
 	if (!is_aer_supported(ha))
 		return PCI_ERS_RESULT_NONE;
 
-	if (test_bit(AF_FW_RECOVERY, &ha->flags)) {
-		ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: firmware hang  -- "
-		    "mmio_enabled\n", ha->host_no, __func__);
-		return PCI_ERS_RESULT_NEED_RESET;
-	} else
-		return PCI_ERS_RESULT_RECOVERED;
+	return PCI_ERS_RESULT_RECOVERED;
 }
 
-uint32_t qla4_8xxx_error_recovery(struct scsi_qla_host *ha)
+static uint32_t qla4_8xxx_error_recovery(struct scsi_qla_host *ha)
 {
 	uint32_t rval = QLA_ERROR;
+	uint32_t ret = 0;
 	int fn;
 	struct pci_dev *other_pdev = NULL;
 
@@ -2312,7 +2305,6 @@ uint32_t qla4_8xxx_error_recovery(struct scsi_qla_host *ha)
 		clear_bit(AF_ONLINE, &ha->flags);
 		qla4xxx_mark_all_devices_missing(ha);
 		qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS);
-		qla4xxx_abort_active_cmds(ha, DID_RESET << 16);
 	}
 
 	fn = PCI_FUNC(ha->pdev->devfn);
@@ -2375,7 +2367,16 @@ uint32_t qla4_8xxx_error_recovery(struct scsi_qla_host *ha)
 			/* Clear driver state register */
 			qla4_8xxx_wr_32(ha, QLA82XX_CRB_DRV_STATE, 0);
 			qla4_8xxx_set_drv_active(ha);
-			ha->isp_ops->enable_intrs(ha);
+			ret = qla4xxx_request_irqs(ha);
+			if (ret) {
+				ql4_printk(KERN_WARNING, ha, "Failed to "
+				    "reserve interrupt %d already in use.\n",
+				    ha->pdev->irq);
+				rval = QLA_ERROR;
+			} else {
+				ha->isp_ops->enable_intrs(ha);
+				rval = QLA_SUCCESS;
+			}
 		}
 		qla4_8xxx_idc_unlock(ha);
 	} else {
@@ -2387,8 +2388,18 @@ uint32_t qla4_8xxx_error_recovery(struct scsi_qla_host *ha)
 			clear_bit(AF_FW_RECOVERY, &ha->flags);
 			rval = qla4xxx_initialize_adapter(ha,
 			    PRESERVE_DDB_LIST);
-			if (rval == QLA_SUCCESS)
-				ha->isp_ops->enable_intrs(ha);
+			if (rval == QLA_SUCCESS) {
+				ret = qla4xxx_request_irqs(ha);
+				if (ret) {
+					ql4_printk(KERN_WARNING, ha, "Failed to"
+					    " reserve interrupt %d already in"
+					    " use.\n", ha->pdev->irq);
+					rval = QLA_ERROR;
+				} else {
+					ha->isp_ops->enable_intrs(ha);
+					rval = QLA_SUCCESS;
+				}
+			}
 			qla4_8xxx_idc_lock(ha);
 			qla4_8xxx_set_drv_active(ha);
 			qla4_8xxx_idc_unlock(ha);
@@ -2430,12 +2441,7 @@ qla4xxx_pci_slot_reset(struct pci_dev *pdev)
 		goto exit_slot_reset;
 	}
 
-	ret = qla4xxx_request_irqs(ha);
-	if (ret) {
-		ql4_printk(KERN_WARNING, ha, "Failed to reserve interrupt %d"
-		    " already in use.\n", pdev->irq);
-		goto exit_slot_reset;
-	}
+	ha->isp_ops->disable_intrs(ha);
 
 	if (is_qla8022(ha)) {
 		if (qla4_8xxx_error_recovery(ha) == QLA_SUCCESS) {
diff --git a/drivers/scsi/qla4xxx/ql4_version.h b/drivers/scsi/qla4xxx/ql4_version.h
index a77b973f2cb..9bfacf4ed13 100644
--- a/drivers/scsi/qla4xxx/ql4_version.h
+++ b/drivers/scsi/qla4xxx/ql4_version.h
@@ -5,4 +5,4 @@
  * See LICENSE.qla4xxx for copyright and licensing details.
  */
 
-#define QLA4XXX_DRIVER_VERSION	"5.02.00-k3"
+#define QLA4XXX_DRIVER_VERSION	"5.02.00-k4"