diff options
| author | Brian King <brking@linux.vnet.ibm.com> | 2007-04-19 13:59:59 -0500 |
|---|---|---|
| committer | James Bottomley <jejb@mulgrave.il.steeleye.com> | 2007-05-06 09:33:12 -0500 |
| commit | e555db930f7512491485cfc43df4306192835373 (patch) | |
| tree | e1048808198385236bad31e778528725d53178c3 /drivers/scsi/scsi_error.c | |
| parent | 2a4aa2c4b206c77b7cf522300ae9b616b0a883a4 (diff) | |
[SCSI] use sysfs configured timeout for EH Start Unit timeout
Use the sysfs configurable timeout when issuing a START_UNIT
command from the scsi error handler. This is needed for devices which
take longer than thirty seconds to respond to the start
unit. The problem was observed when sending a start unit
to a disk array device in an ipr RAID adapter, which results
in the adapter firmware sending potentially multiple commands
to physical devices as a result of this command, which ended
up timing out sometimes. This patch does not change the default
value used for this command.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Diffstat (limited to 'drivers/scsi/scsi_error.c')
| -rw-r--r-- | drivers/scsi/scsi_error.c | 3 |
1 files changed, 1 insertions, 2 deletions
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 3963e7013bd..e8350c562d2 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -38,7 +38,6 @@ #include "scsi_logging.h" #define SENSE_TIMEOUT (10*HZ) -#define START_UNIT_TIMEOUT (30*HZ) /* * These should *probably* be handled by the host itself. @@ -936,7 +935,7 @@ static int scsi_eh_try_stu(struct scsi_cmnd *scmd) for (i = 0; rtn == NEEDS_RETRY && i < 2; i++) rtn = scsi_send_eh_cmnd(scmd, stu_command, 6, - START_UNIT_TIMEOUT, 0); + scmd->device->timeout, 0); if (rtn == SUCCESS) return 0; |