summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/scsi_lib.c
diff options
context:
space:
mode:
authorChristoph Hellwig <hch@lst.de>2006-11-04 20:10:55 +0100
committerJames Bottomley <jejb@mulgrave.il.steeleye.com>2006-11-15 14:14:20 -0600
commit3b00315799d78f76531b71435fbc2643cd71ae4c (patch)
tree82f4041632d24e90c18482ffffa6511207978636 /drivers/scsi/scsi_lib.c
parent2dc611de5a3fd955cd0298c50691d4c05046db97 (diff)
[SCSI] untangle scsi_prep_fn
I wanted to add some BUG checks to scsi_prep_fn to make sure no one sends us a non-sg command, but this function is a horrible mess. So I decided to detangle the function and document what the valid cases are. While doing that I found that REQ_TYPE_SPECIAL commands aren't used by the SCSI layer anymore and we can get rid of the code handling them. The new structure of scsi_prep_fn is: (1) check if we're allowed to send this command (2) big switch on cmd_type. For the two valid types call into a function to set the command up, else error (3) code to handle error cases Because FS and BLOCK_PC commands are handled entirely separate after the patch this introduces a tiny amount of code duplication. This improves readabiulity though and will help to avoid the bidi command overhead for FS commands so it's a good thing. I've tested this on both sata and mptsas. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Diffstat (limited to 'drivers/scsi/scsi_lib.c')
-rw-r--r--drivers/scsi/scsi_lib.c313
1 files changed, 166 insertions, 147 deletions
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 743f67ed764..ee35a62bb7a 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -995,25 +995,14 @@ static int scsi_init_io(struct scsi_cmnd *cmd)
int count;
/*
- * if this is a rq->data based REQ_BLOCK_PC, setup for a non-sg xfer
- */
- if (blk_pc_request(req) && !req->bio) {
- cmd->request_bufflen = req->data_len;
- cmd->request_buffer = req->data;
- req->buffer = req->data;
- cmd->use_sg = 0;
- return 0;
- }
-
- /*
- * we used to not use scatter-gather for single segment request,
+ * We used to not use scatter-gather for single segment request,
* but now we do (it makes highmem I/O easier to support without
* kmapping pages)
*/
cmd->use_sg = req->nr_phys_segments;
/*
- * if sg table allocation fails, requeue request later.
+ * If sg table allocation fails, requeue request later.
*/
sgpnt = scsi_alloc_sgtable(cmd, GFP_ATOMIC);
if (unlikely(!sgpnt)) {
@@ -1021,24 +1010,21 @@ static int scsi_init_io(struct scsi_cmnd *cmd)
return BLKPREP_DEFER;
}
+ req->buffer = NULL;
cmd->request_buffer = (char *) sgpnt;
- cmd->request_bufflen = req->nr_sectors << 9;
if (blk_pc_request(req))
cmd->request_bufflen = req->data_len;
- req->buffer = NULL;
+ else
+ cmd->request_bufflen = req->nr_sectors << 9;
/*
* Next, walk the list, and fill in the addresses and sizes of
* each segment.
*/
count = blk_rq_map_sg(req->q, req, cmd->request_buffer);
-
- /*
- * mapped well, send it off
- */
if (likely(count <= cmd->use_sg)) {
cmd->use_sg = count;
- return 0;
+ return BLKPREP_OK;
}
printk(KERN_ERR "Incorrect number of segments after building list\n");
@@ -1068,6 +1054,27 @@ static int scsi_issue_flush_fn(request_queue_t *q, struct gendisk *disk,
return -EOPNOTSUPP;
}
+static struct scsi_cmnd *scsi_get_cmd_from_req(struct scsi_device *sdev,
+ struct request *req)
+{
+ struct scsi_cmnd *cmd;
+
+ if (!req->special) {
+ cmd = scsi_get_command(sdev, GFP_ATOMIC);
+ if (unlikely(!cmd))
+ return NULL;
+ req->special = cmd;
+ } else {
+ cmd = req->special;
+ }
+
+ /* pull a tag out of the request if we have one */
+ cmd->tag = req->tag;
+ cmd->request = req;
+
+ return cmd;
+}
+
static void scsi_blk_pc_done(struct scsi_cmnd *cmd)
{
BUG_ON(!blk_pc_request(cmd->request));
@@ -1080,9 +1087,37 @@ static void scsi_blk_pc_done(struct scsi_cmnd *cmd)
scsi_io_completion(cmd, cmd->request_bufflen);
}
-static void scsi_setup_blk_pc_cmnd(struct scsi_cmnd *cmd)
+static int scsi_setup_blk_pc_cmnd(struct scsi_device *sdev, struct request *req)
{
- struct request *req = cmd->request;
+ struct scsi_cmnd *cmd;
+
+ cmd = scsi_get_cmd_from_req(sdev, req);
+ if (unlikely(!cmd))
+ return BLKPREP_DEFER;
+
+ /*
+ * BLOCK_PC requests may transfer data, in which case they must
+ * a bio attached to them. Or they might contain a SCSI command
+ * that does not transfer data, in which case they may optionally
+ * submit a request without an attached bio.
+ */
+ if (req->bio) {
+ int ret;
+
+ BUG_ON(!req->nr_phys_segments);
+
+ ret = scsi_init_io(cmd);
+ if (unlikely(ret))
+ return ret;
+ } else {
+ BUG_ON(req->data_len);
+ BUG_ON(req->data);
+
+ cmd->request_bufflen = 0;
+ cmd->request_buffer = NULL;
+ cmd->use_sg = 0;
+ req->buffer = NULL;
+ }
BUG_ON(sizeof(req->cmd) > sizeof(cmd->cmnd));
memcpy(cmd->cmnd, req->cmd, sizeof(cmd->cmnd));
@@ -1098,154 +1133,138 @@ static void scsi_setup_blk_pc_cmnd(struct scsi_cmnd *cmd)
cmd->allowed = req->retries;
cmd->timeout_per_command = req->timeout;
cmd->done = scsi_blk_pc_done;
+ return BLKPREP_OK;
}
-static int scsi_prep_fn(struct request_queue *q, struct request *req)
+/*
+ * Setup a REQ_TYPE_FS command. These are simple read/write request
+ * from filesystems that still need to be translated to SCSI CDBs from
+ * the ULD.
+ */
+static int scsi_setup_fs_cmnd(struct scsi_device *sdev, struct request *req)
{
- struct scsi_device *sdev = q->queuedata;
struct scsi_cmnd *cmd;
- int specials_only = 0;
+ struct scsi_driver *drv;
+ int ret;
/*
- * Just check to see if the device is online. If it isn't, we
- * refuse to process any commands. The device must be brought
- * online before trying any recovery commands
+ * Filesystem requests must transfer data.
*/
- if (unlikely(!scsi_device_online(sdev))) {
- sdev_printk(KERN_ERR, sdev,
- "rejecting I/O to offline device\n");
- goto kill;
- }
- if (unlikely(sdev->sdev_state != SDEV_RUNNING)) {
- /* OK, we're not in a running state don't prep
- * user commands */
- if (sdev->sdev_state == SDEV_DEL) {
- /* Device is fully deleted, no commands
- * at all allowed down */
- sdev_printk(KERN_ERR, sdev,
- "rejecting I/O to dead device\n");
- goto kill;
- }
- /* OK, we only allow special commands (i.e. not
- * user initiated ones */
- specials_only = sdev->sdev_state;
+ BUG_ON(!req->nr_phys_segments);
+
+ cmd = scsi_get_cmd_from_req(sdev, req);
+ if (unlikely(!cmd))
+ return BLKPREP_DEFER;
+
+ ret = scsi_init_io(cmd);
+ if (unlikely(ret))
+ return ret;
+
+ /*
+ * Initialize the actual SCSI command for this request.
+ */
+ drv = *(struct scsi_driver **)req->rq_disk->private_data;
+ if (unlikely(!drv->init_command(cmd))) {
+ scsi_release_buffers(cmd);
+ scsi_put_command(cmd);
+ return BLKPREP_KILL;
}
+ return BLKPREP_OK;
+}
+
+static int scsi_prep_fn(struct request_queue *q, struct request *req)
+{
+ struct scsi_device *sdev = q->queuedata;
+ int ret = BLKPREP_OK;
+
/*
- * Find the actual device driver associated with this command.
- * The SPECIAL requests are things like character device or
- * ioctls, which did not originate from ll_rw_blk. Note that
- * the special field is also used to indicate the cmd for
- * the remainder of a partially fulfilled request that can
- * come up when there is a medium error. We have to treat
- * these two cases differently. We differentiate by looking
- * at request->cmd, as this tells us the real story.
+ * If the device is not in running state we will reject some
+ * or all commands.
*/
- if (blk_special_request(req) && req->special)
- cmd = req->special;
- else if (blk_pc_request(req) || blk_fs_request(req)) {
- if (unlikely(specials_only) && !(req->cmd_flags & REQ_PREEMPT)){
- if (specials_only == SDEV_QUIESCE ||
- specials_only == SDEV_BLOCK)
- goto defer;
-
+ if (unlikely(sdev->sdev_state != SDEV_RUNNING)) {
+ switch (sdev->sdev_state) {
+ case SDEV_OFFLINE:
+ /*
+ * If the device is offline we refuse to process any
+ * commands. The device must be brought online
+ * before trying any recovery commands.
+ */
sdev_printk(KERN_ERR, sdev,
- "rejecting I/O to device being removed\n");
- goto kill;
+ "rejecting I/O to offline device\n");
+ ret = BLKPREP_KILL;
+ break;
+ case SDEV_DEL:
+ /*
+ * If the device is fully deleted, we refuse to
+ * process any commands as well.
+ */
+ sdev_printk(KERN_ERR, sdev,
+ "rejecting I/O to dead device\n");
+ ret = BLKPREP_KILL;
+ break;
+ case SDEV_QUIESCE:
+ case SDEV_BLOCK:
+ /*
+ * If the devices is blocked we defer normal commands.
+ */
+ if (!(req->cmd_flags & REQ_PREEMPT))
+ ret = BLKPREP_DEFER;
+ break;
+ default:
+ /*
+ * For any other not fully online state we only allow
+ * special commands. In particular any user initiated
+ * command is not allowed.
+ */
+ if (!(req->cmd_flags & REQ_PREEMPT))
+ ret = BLKPREP_KILL;
+ break;
}
-
- /*
- * Now try and find a command block that we can use.
- */
- if (!req->special) {
- cmd = scsi_get_command(sdev, GFP_ATOMIC);
- if (unlikely(!cmd))
- goto defer;
- } else
- cmd = req->special;
-
- /* pull a tag out of the request if we have one */
- cmd->tag = req->tag;
- } else {
- blk_dump_rq_flags(req, "SCSI bad req");
- goto kill;
+
+ if (ret != BLKPREP_OK)
+ goto out;
}
-
- /* note the overloading of req->special. When the tag
- * is active it always means cmd. If the tag goes
- * back for re-queueing, it may be reset */
- req->special = cmd;
- cmd->request = req;
-
- /*
- * FIXME: drop the lock here because the functions below
- * expect to be called without the queue lock held. Also,
- * previously, we dequeued the request before dropping the
- * lock. We hope REQ_STARTED prevents anything untoward from
- * happening now.
- */
- if (blk_fs_request(req) || blk_pc_request(req)) {
- int ret;
+ switch (req->cmd_type) {
+ case REQ_TYPE_BLOCK_PC:
+ ret = scsi_setup_blk_pc_cmnd(sdev, req);
+ break;
+ case REQ_TYPE_FS:
+ ret = scsi_setup_fs_cmnd(sdev, req);
+ break;
+ default:
/*
- * This will do a couple of things:
- * 1) Fill in the actual SCSI command.
- * 2) Fill in any other upper-level specific fields
- * (timeout).
+ * All other command types are not supported.
*
- * If this returns 0, it means that the request failed
- * (reading past end of disk, reading offline device,
- * etc). This won't actually talk to the device, but
- * some kinds of consistency checking may cause the
- * request to be rejected immediately.
+ * Note that these days the SCSI subsystem does not use
+ * REQ_TYPE_SPECIAL requests anymore. These are only used
+ * (directly or via blk_insert_request) by non-SCSI drivers.
*/
+ blk_dump_rq_flags(req, "SCSI bad req");
+ ret = BLKPREP_KILL;
+ break;
+ }
- /*
- * This sets up the scatter-gather table (allocating if
- * required).
- */
- ret = scsi_init_io(cmd);
- switch(ret) {
- /* For BLKPREP_KILL/DEFER the cmd was released */
- case BLKPREP_KILL:
- goto kill;
- case BLKPREP_DEFER:
- goto defer;
- }
-
+ out:
+ switch (ret) {
+ case BLKPREP_KILL:
+ req->errors = DID_NO_CONNECT << 16;
+ break;
+ case BLKPREP_DEFER:
/*
- * Initialize the actual SCSI command for this request.
+ * If we defer, the elv_next_request() returns NULL, but the
+ * queue must be restarted, so we plug here if no returning
+ * command will automatically do that.
*/
- if (blk_pc_request(req)) {
- scsi_setup_blk_pc_cmnd(cmd);
- } else if (req->rq_disk) {
- struct scsi_driver *drv;
-
- drv = *(struct scsi_driver **)req->rq_disk->private_data;
- if (unlikely(!drv->init_command(cmd))) {
- scsi_release_buffers(cmd);
- scsi_put_command(cmd);
- goto kill;
- }
- }
+ if (sdev->device_busy == 0)
+ blk_plug_device(q);
+ break;
+ default:
+ req->cmd_flags |= REQ_DONTPREP;
}
- /*
- * The request is now prepped, no need to come back here
- */
- req->cmd_flags |= REQ_DONTPREP;
- return BLKPREP_OK;
-
- defer:
- /* If we defer, the elv_next_request() returns NULL, but the
- * queue must be restarted, so we plug here if no returning
- * command will automatically do that. */
- if (sdev->device_busy == 0)
- blk_plug_device(q);
- return BLKPREP_DEFER;
- kill:
- req->errors = DID_NO_CONNECT << 16;
- return BLKPREP_KILL;
+ return ret;
}
/*