Auto-update from upstream

1 files changed, 4 insertions, 100 deletions

diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.h b/drivers/scsi/sym53c8xx_2/sym_hipd.h
index 3a264a40821..2456090bb24 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.h
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.h
@@ -48,12 +48,6 @@
  *  They may be defined in platform specific headers, if they 
  *  are useful.
  *
- *    SYM_OPT_HANDLE_DIR_UNKNOWN
- *        When this option is set, the SCRIPTS used by the driver 
- *        are able to handle SCSI transfers with direction not 
- *        supplied by user.
- *        (set for Linux-2.0.X)
- *
  *    SYM_OPT_HANDLE_DEVICE_QUEUEING
  *        When this option is set, the driver will use a queue per 
  *        device and handle QUEUE FULL status requeuing internally.
@@ -64,7 +58,6 @@
  *        (set for Linux)
  */
 #if 0
-#define SYM_OPT_HANDLE_DIR_UNKNOWN
 #define SYM_OPT_HANDLE_DEVICE_QUEUEING
 #define SYM_OPT_LIMIT_COMMAND_REORDERING
 #endif
@@ -416,19 +409,6 @@ struct sym_tcb {
 	struct sym_lcb **lunmp;		/* Other LCBs [1..MAX_LUN]	*/
 #endif
 
-	/*
-	 *  Bitmap that tells about LUNs that succeeded at least 
-	 *  1 IO and therefore assumed to be a real device.
-	 *  Avoid useless allocation of the LCB structure.
-	 */
-	u32	lun_map[(SYM_CONF_MAX_LUN+31)/32];
-
-	/*
-	 *  Bitmap that tells about LUNs that haven't yet an LCB 
-	 *  allocated (not discovered or LCB allocation failed).
-	 */
-	u32	busy0_map[(SYM_CONF_MAX_LUN+31)/32];
-
 #ifdef	SYM_HAVE_STCB
 	/*
 	 *  O/S specific data structure.
@@ -454,8 +434,10 @@ struct sym_tcb {
 	 *  Other user settable limits and options.
 	 *  These limits are read from the NVRAM if present.
 	 */
-	u_char	usrflags;
-	u_short	usrtags;
+	unsigned char	usrflags;
+	unsigned char	usr_period;
+	unsigned char	usr_width;
+	unsigned short	usrtags;
 	struct scsi_target *starget;
 };
 
@@ -672,9 +654,6 @@ struct sym_ccbh {
 	 */
 	u32	savep;		/* Jump address to saved data pointer	*/
 	u32	lastp;		/* SCRIPTS address at end of data	*/
-#ifdef	SYM_OPT_HANDLE_DIR_UNKNOWN
-	u32	wlastp;
-#endif
 
 	/*
 	 *  Status fields.
@@ -804,9 +783,6 @@ struct sym_ccb {
 	SYM_QUEHEAD link_ccbq;	/* Link to free/busy CCB queue	*/
 	u32	startp;		/* Initial data pointer		*/
 	u32	goalp;		/* Expected last data pointer	*/
-#ifdef	SYM_OPT_HANDLE_DIR_UNKNOWN
-	u32	wgoalp;
-#endif
 	int	ext_sg;		/* Extreme data pointer, used	*/
 	int	ext_ofs;	/*  to calculate the residual.	*/
 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
@@ -821,12 +797,6 @@ struct sym_ccb {
 
 #define CCB_BA(cp,lbl)	cpu_to_scr(cp->ccb_ba + offsetof(struct sym_ccb, lbl))
 
-#ifdef	SYM_OPT_HANDLE_DIR_UNKNOWN
-#define	sym_goalp(cp) ((cp->host_flags & HF_DATA_IN) ? cp->goalp : cp->wgoalp)
-#else
-#define	sym_goalp(cp) (cp->goalp)
-#endif
-
 typedef struct device *m_pool_ident_t;
 
 /*
@@ -1077,7 +1047,6 @@ char *sym_driver_name(void);
 void sym_print_xerr(struct scsi_cmnd *cmd, int x_status);
 int sym_reset_scsi_bus(struct sym_hcb *np, int enab_int);
 struct sym_chip *sym_lookup_chip_table(u_short device_id, u_char revision);
-void sym_put_start_queue(struct sym_hcb *np, struct sym_ccb *cp);
 #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING
 void sym_start_next_ccbs(struct sym_hcb *np, struct sym_lcb *lp, int maxn);
 #endif
@@ -1136,71 +1105,6 @@ bad:
 #endif
 
 /*
- *  Set up data pointers used by SCRIPTS.
- *  Called from O/S specific code.
- */
-static inline void sym_setup_data_pointers(struct sym_hcb *np,
-		struct sym_ccb *cp, int dir)
-{
-	u32 lastp, goalp;
-
-	/*
-	 *  No segments means no data.
-	 */
-	if (!cp->segments)
-		dir = DMA_NONE;
-
-	/*
-	 *  Set the data pointer.
-	 */
-	switch(dir) {
-#ifdef	SYM_OPT_HANDLE_DIR_UNKNOWN
-	case DMA_BIDIRECTIONAL:
-#endif
-	case DMA_TO_DEVICE:
-		goalp = SCRIPTA_BA(np, data_out2) + 8;
-		lastp = goalp - 8 - (cp->segments * (2*4));
-#ifdef	SYM_OPT_HANDLE_DIR_UNKNOWN
-		cp->wgoalp = cpu_to_scr(goalp);
-		if (dir != DMA_BIDIRECTIONAL)
-			break;
-		cp->phys.head.wlastp = cpu_to_scr(lastp);
-		/* fall through */
-#else
-		break;
-#endif
-	case DMA_FROM_DEVICE:
-		cp->host_flags |= HF_DATA_IN;
-		goalp = SCRIPTA_BA(np, data_in2) + 8;
-		lastp = goalp - 8 - (cp->segments * (2*4));
-		break;
-	case DMA_NONE:
-	default:
-#ifdef	SYM_OPT_HANDLE_DIR_UNKNOWN
-		cp->host_flags |= HF_DATA_IN;
-#endif
-		lastp = goalp = SCRIPTB_BA(np, no_data);
-		break;
-	}
-
-	/*
-	 *  Set all pointers values needed by SCRIPTS.
-	 */
-	cp->phys.head.lastp = cpu_to_scr(lastp);
-	cp->phys.head.savep = cpu_to_scr(lastp);
-	cp->startp	    = cp->phys.head.savep;
-	cp->goalp	    = cpu_to_scr(goalp);
-
-#ifdef	SYM_OPT_HANDLE_DIR_UNKNOWN
-	/*
-	 *  If direction is unknown, start at data_io.
-	 */
-	if (dir == DMA_BIDIRECTIONAL)
-		cp->phys.head.savep = cpu_to_scr(SCRIPTB_BA(np, data_io));
-#endif
-}
-
-/*
  *  MEMORY ALLOCATOR.
  */