Auto-update from upstream

1 files changed, 0 insertions, 1320 deletions

diff --git a/drivers/scsi/sym53c8xx_defs.h b/drivers/scsi/sym53c8xx_defs.h
deleted file mode 100644
index 139cd0e12e6..00000000000
--- a/drivers/scsi/sym53c8xx_defs.h
+++ /dev/null
@@ -1,1320 +0,0 @@
-/******************************************************************************
-**  High Performance device driver for the Symbios 53C896 controller.
-**
-**  Copyright (C) 1998-2001  Gerard Roudier <groudier@free.fr>
-**
-**  This driver also supports all the Symbios 53C8XX controller family, 
-**  except 53C810 revisions < 16, 53C825 revisions < 16 and all 
-**  revisions of 53C815 controllers.
-**
-**  This driver is based on the Linux port of the FreeBSD ncr driver.
-** 
-**  Copyright (C) 1994  Wolfgang Stanglmeier
-**  
-**-----------------------------------------------------------------------------
-**  
-**  This program is free software; you can redistribute it and/or modify
-**  it under the terms of the GNU General Public License as published by
-**  the Free Software Foundation; either version 2 of the License, or
-**  (at your option) any later version.
-**
-**  This program is distributed in the hope that it will be useful,
-**  but WITHOUT ANY WARRANTY; without even the implied warranty of
-**  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-**  GNU General Public License for more details.
-**
-**  You should have received a copy of the GNU General Public License
-**  along with this program; if not, write to the Free Software
-**  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-**-----------------------------------------------------------------------------
-**
-**  The Linux port of the FreeBSD ncr driver has been achieved in 
-**  november 1995 by:
-**
-**          Gerard Roudier              <groudier@free.fr>
-**
-**  Being given that this driver originates from the FreeBSD version, and
-**  in order to keep synergy on both, any suggested enhancements and corrections
-**  received on Linux are automatically a potential candidate for the FreeBSD 
-**  version.
-**
-**  The original driver has been written for 386bsd and FreeBSD by
-**          Wolfgang Stanglmeier        <wolf@cologne.de>
-**          Stefan Esser                <se@mi.Uni-Koeln.de>
-**
-**-----------------------------------------------------------------------------
-**
-**  Major contributions:
-**  --------------------
-**
-**  NVRAM detection and reading.
-**    Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
-**
-**  Added support for MIPS big endian systems.
-**    Carsten Langgaard, carstenl@mips.com
-**    Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
-**
-**  Added support for HP PARISC big endian systems.
-**    Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
-**
-*******************************************************************************
-*/
-
-#ifndef SYM53C8XX_DEFS_H
-#define SYM53C8XX_DEFS_H
-
-#include <linux/config.h>
-
-/*
-**	If you want a driver as small as possible, donnot define the 
-**	following options.
-*/
-#define SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT
-#define SCSI_NCR_DEBUG_INFO_SUPPORT
-
-/*
-**	To disable integrity checking, do not define the 
-**	following option.
-*/
-#ifdef	CONFIG_SCSI_NCR53C8XX_INTEGRITY_CHECK
-#	define SCSI_NCR_ENABLE_INTEGRITY_CHECK
-#endif
-
-/* ---------------------------------------------------------------------
-** Take into account kernel configured parameters.
-** Most of these options can be overridden at startup by a command line.
-** ---------------------------------------------------------------------
-*/
-
-/*
- * For Ultra2 and Ultra3 SCSI support option, use special features. 
- *
- * Value (default) means:
- *	bit 0 : all features enabled, except:
- *		bit 1 : PCI Write And Invalidate.
- *		bit 2 : Data Phase Mismatch handling from SCRIPTS.
- *
- * Use boot options ncr53c8xx=specf:1 if you want all chip features to be 
- * enabled by the driver.
- */
-#define	SCSI_NCR_SETUP_SPECIAL_FEATURES		(3)
-
-#define SCSI_NCR_MAX_SYNC			(80)
-
-/*
- * Allow tags from 2 to 256, default 8
- */
-#ifdef	CONFIG_SCSI_NCR53C8XX_MAX_TAGS
-#if	CONFIG_SCSI_NCR53C8XX_MAX_TAGS < 2
-#define SCSI_NCR_MAX_TAGS	(2)
-#elif	CONFIG_SCSI_NCR53C8XX_MAX_TAGS > 256
-#define SCSI_NCR_MAX_TAGS	(256)
-#else
-#define	SCSI_NCR_MAX_TAGS	CONFIG_SCSI_NCR53C8XX_MAX_TAGS
-#endif
-#else
-#define SCSI_NCR_MAX_TAGS	(8)
-#endif
-
-/*
- * Allow tagged command queuing support if configured with default number 
- * of tags set to max (see above).
- */
-#ifdef	CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS
-#define	SCSI_NCR_SETUP_DEFAULT_TAGS	CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS
-#elif	defined CONFIG_SCSI_NCR53C8XX_TAGGED_QUEUE
-#define	SCSI_NCR_SETUP_DEFAULT_TAGS	SCSI_NCR_MAX_TAGS
-#else
-#define	SCSI_NCR_SETUP_DEFAULT_TAGS	(0)
-#endif
-
-/*
- * Immediate arbitration
- */
-#if defined(CONFIG_SCSI_NCR53C8XX_IARB)
-#define SCSI_NCR_IARB_SUPPORT
-#endif
-
-/*
- * Sync transfer frequency at startup.
- * Allow from 5Mhz to 80Mhz default 20 Mhz.
- */
-#ifndef	CONFIG_SCSI_NCR53C8XX_SYNC
-#define	CONFIG_SCSI_NCR53C8XX_SYNC	(20)
-#elif	CONFIG_SCSI_NCR53C8XX_SYNC > SCSI_NCR_MAX_SYNC
-#undef	CONFIG_SCSI_NCR53C8XX_SYNC
-#define	CONFIG_SCSI_NCR53C8XX_SYNC	SCSI_NCR_MAX_SYNC
-#endif
-
-#if	CONFIG_SCSI_NCR53C8XX_SYNC == 0
-#define	SCSI_NCR_SETUP_DEFAULT_SYNC	(255)
-#elif	CONFIG_SCSI_NCR53C8XX_SYNC <= 5
-#define	SCSI_NCR_SETUP_DEFAULT_SYNC	(50)
-#elif	CONFIG_SCSI_NCR53C8XX_SYNC <= 20
-#define	SCSI_NCR_SETUP_DEFAULT_SYNC	(250/(CONFIG_SCSI_NCR53C8XX_SYNC))
-#elif	CONFIG_SCSI_NCR53C8XX_SYNC <= 33
-#define	SCSI_NCR_SETUP_DEFAULT_SYNC	(11)
-#elif	CONFIG_SCSI_NCR53C8XX_SYNC <= 40
-#define	SCSI_NCR_SETUP_DEFAULT_SYNC	(10)
-#else
-#define	SCSI_NCR_SETUP_DEFAULT_SYNC 	(9)
-#endif
-
-/*
- * Disallow disconnections at boot-up
- */
-#ifdef CONFIG_SCSI_NCR53C8XX_NO_DISCONNECT
-#define SCSI_NCR_SETUP_DISCONNECTION	(0)
-#else
-#define SCSI_NCR_SETUP_DISCONNECTION	(1)
-#endif
-
-/*
- * Force synchronous negotiation for all targets
- */
-#ifdef CONFIG_SCSI_NCR53C8XX_FORCE_SYNC_NEGO
-#define SCSI_NCR_SETUP_FORCE_SYNC_NEGO	(1)
-#else
-#define SCSI_NCR_SETUP_FORCE_SYNC_NEGO	(0)
-#endif
-
-/*
- * Disable master parity checking (flawed hardwares need that)
- */
-#ifdef CONFIG_SCSI_NCR53C8XX_DISABLE_MPARITY_CHECK
-#define SCSI_NCR_SETUP_MASTER_PARITY	(0)
-#else
-#define SCSI_NCR_SETUP_MASTER_PARITY	(1)
-#endif
-
-/*
- * Disable scsi parity checking (flawed devices may need that)
- */
-#ifdef CONFIG_SCSI_NCR53C8XX_DISABLE_PARITY_CHECK
-#define SCSI_NCR_SETUP_SCSI_PARITY	(0)
-#else
-#define SCSI_NCR_SETUP_SCSI_PARITY	(1)
-#endif
-
-/*
- * Settle time after reset at boot-up
- */
-#define SCSI_NCR_SETUP_SETTLE_TIME	(2)
-
-/*
-**	Bridge quirks work-around option defaulted to 1.
-*/
-#ifndef	SCSI_NCR_PCIQ_WORK_AROUND_OPT
-#define	SCSI_NCR_PCIQ_WORK_AROUND_OPT	1
-#endif
-
-/*
-**	Work-around common bridge misbehaviour.
-**
-**	- Do not flush posted writes in the opposite 
-**	  direction on read.
-**	- May reorder DMA writes to memory.
-**
-**	This option should not affect performances 
-**	significantly, so it is the default.
-*/
-#if	SCSI_NCR_PCIQ_WORK_AROUND_OPT == 1
-#define	SCSI_NCR_PCIQ_MAY_NOT_FLUSH_PW_UPSTREAM
-#define	SCSI_NCR_PCIQ_MAY_REORDER_WRITES
-#define	SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS
-
-/*
-**	Same as option 1, but also deal with 
-**	misconfigured interrupts.
-**
-**	- Edge triggerred instead of level sensitive.
-**	- No interrupt line connected.
-**	- IRQ number misconfigured.
-**	
-**	If no interrupt is delivered, the driver will 
-**	catch the interrupt conditions 10 times per 
-**	second. No need to say that this option is 
-**	not recommended.
-*/
-#elif	SCSI_NCR_PCIQ_WORK_AROUND_OPT == 2
-#define	SCSI_NCR_PCIQ_MAY_NOT_FLUSH_PW_UPSTREAM
-#define	SCSI_NCR_PCIQ_MAY_REORDER_WRITES
-#define	SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS
-#define	SCSI_NCR_PCIQ_BROKEN_INTR
-
-/*
-**	Some bridge designers decided to flush 
-**	everything prior to deliver the interrupt.
-**	This option tries to deal with such a 
-**	behaviour.
-*/
-#elif	SCSI_NCR_PCIQ_WORK_AROUND_OPT == 3
-#define	SCSI_NCR_PCIQ_SYNC_ON_INTR
-#endif
-
-/*
-**	Other parameters not configurable with "make config"
-**	Avoid to change these constants, unless you know what you are doing.
-*/
-
-#define SCSI_NCR_ALWAYS_SIMPLE_TAG
-#define SCSI_NCR_MAX_SCATTER	(127)
-#define SCSI_NCR_MAX_TARGET	(16)
-
-/*
-**   Compute some desirable value for CAN_QUEUE 
-**   and CMD_PER_LUN.
-**   The driver will use lower values if these 
-**   ones appear to be too large.
-*/
-#define SCSI_NCR_CAN_QUEUE	(8*SCSI_NCR_MAX_TAGS + 2*SCSI_NCR_MAX_TARGET)
-#define SCSI_NCR_CMD_PER_LUN	(SCSI_NCR_MAX_TAGS)
-
-#define SCSI_NCR_SG_TABLESIZE	(SCSI_NCR_MAX_SCATTER)
-#define SCSI_NCR_TIMER_INTERVAL	(HZ)
-
-#if 1 /* defined CONFIG_SCSI_MULTI_LUN */
-#define SCSI_NCR_MAX_LUN	(16)
-#else
-#define SCSI_NCR_MAX_LUN	(1)
-#endif
-
-/*
- *  IO functions definition for big/little endian CPU support.
- *  For now, the NCR is only supported in little endian addressing mode, 
- */
-
-#ifdef	__BIG_ENDIAN
-
-#define	inw_l2b		inw
-#define	inl_l2b		inl
-#define	outw_b2l	outw
-#define	outl_b2l	outl
-
-#define	readb_raw	readb
-#define	writeb_raw	writeb
-
-#if defined(SCSI_NCR_BIG_ENDIAN)
-#define	readw_l2b	__raw_readw
-#define	readl_l2b	__raw_readl
-#define	writew_b2l	__raw_writew
-#define	writel_b2l	__raw_writel
-#define	readw_raw	__raw_readw
-#define	readl_raw	__raw_readl
-#define	writew_raw	__raw_writew
-#define	writel_raw	__raw_writel
-#else	/* Other big-endian */
-#define	readw_l2b	readw
-#define	readl_l2b	readl
-#define	writew_b2l	writew
-#define	writel_b2l	writel
-#define	readw_raw	readw
-#define	readl_raw	readl
-#define	writew_raw	writew
-#define	writel_raw	writel
-#endif
-
-#else	/* little endian */
-
-#define	inw_raw		inw
-#define	inl_raw		inl
-#define	outw_raw	outw
-#define	outl_raw	outl
-
-#define	readb_raw	readb
-#define	readw_raw	readw
-#define	readl_raw	readl
-#define	writeb_raw	writeb
-#define	writew_raw	writew
-#define	writel_raw	writel
-
-#endif
-
-#if !defined(__hppa__) && !defined(__mips__)
-#ifdef	SCSI_NCR_BIG_ENDIAN
-#error	"The NCR in BIG ENDIAN addressing mode is not (yet) supported"
-#endif
-#endif
-
-#define MEMORY_BARRIER()	mb()
-
-
-/*
- *  If the NCR uses big endian addressing mode over the 
- *  PCI, actual io register addresses for byte and word 
- *  accesses must be changed according to lane routing.
- *  Btw, ncr_offb() and ncr_offw() macros only apply to 
- *  constants and so donnot generate bloated code.
- */
-
-#if	defined(SCSI_NCR_BIG_ENDIAN)
-
-#define ncr_offb(o)	(((o)&~3)+((~((o)&3))&3))
-#define ncr_offw(o)	(((o)&~3)+((~((o)&3))&2))
-
-#else
-
-#define ncr_offb(o)	(o)
-#define ncr_offw(o)	(o)
-
-#endif
-
-/*
- *  If the CPU and the NCR use same endian-ness addressing,
- *  no byte reordering is needed for script patching.
- *  Macro cpu_to_scr() is to be used for script patching.
- *  Macro scr_to_cpu() is to be used for getting a DWORD 
- *  from the script.
- */
-
-#if	defined(__BIG_ENDIAN) && !defined(SCSI_NCR_BIG_ENDIAN)
-
-#define cpu_to_scr(dw)	cpu_to_le32(dw)
-#define scr_to_cpu(dw)	le32_to_cpu(dw)
-
-#elif	defined(__LITTLE_ENDIAN) && defined(SCSI_NCR_BIG_ENDIAN)
-
-#define cpu_to_scr(dw)	cpu_to_be32(dw)
-#define scr_to_cpu(dw)	be32_to_cpu(dw)
-
-#else
-
-#define cpu_to_scr(dw)	(dw)
-#define scr_to_cpu(dw)	(dw)
-
-#endif
-
-/*
- *  Access to the controller chip.
- *
- *  If the CPU and the NCR use same endian-ness addressing,
- *  no byte reordering is needed for accessing chip io 
- *  registers. Functions suffixed by '_raw' are assumed 
- *  to access the chip over the PCI without doing byte 
- *  reordering. Functions suffixed by '_l2b' are 
- *  assumed to perform little-endian to big-endian byte 
- *  reordering, those suffixed by '_b2l' blah, blah,
- *  blah, ...
- */
-
-/*
- *  MEMORY mapped IO input / output
- */
-
-#define INB_OFF(o)		readb_raw((char __iomem *)np->reg + ncr_offb(o))
-#define OUTB_OFF(o, val)	writeb_raw((val), (char __iomem *)np->reg + ncr_offb(o))
-
-#if	defined(__BIG_ENDIAN) && !defined(SCSI_NCR_BIG_ENDIAN)
-
-#define INW_OFF(o)		readw_l2b((char __iomem *)np->reg + ncr_offw(o))
-#define INL_OFF(o)		readl_l2b((char __iomem *)np->reg + (o))
-
-#define OUTW_OFF(o, val)	writew_b2l((val), (char __iomem *)np->reg + ncr_offw(o))
-#define OUTL_OFF(o, val)	writel_b2l((val), (char __iomem *)np->reg + (o))
-
-#elif	defined(__LITTLE_ENDIAN) && defined(SCSI_NCR_BIG_ENDIAN)
-
-#define INW_OFF(o)		readw_b2l((char __iomem *)np->reg + ncr_offw(o))
-#define INL_OFF(o)		readl_b2l((char __iomem *)np->reg + (o))
-
-#define OUTW_OFF(o, val)	writew_l2b((val), (char __iomem *)np->reg + ncr_offw(o))
-#define OUTL_OFF(o, val)	writel_l2b((val), (char __iomem *)np->reg + (o))
-
-#else
-
-#ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
-/* Only 8 or 32 bit transfers allowed */
-#define INW_OFF(o)		(readb((char __iomem *)np->reg + ncr_offw(o)) << 8 | readb((char __iomem *)np->reg + ncr_offw(o) + 1))
-#else
-#define INW_OFF(o)		readw_raw((char __iomem *)np->reg + ncr_offw(o))
-#endif
-#define INL_OFF(o)		readl_raw((char __iomem *)np->reg + (o))
-
-#ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
-/* Only 8 or 32 bit transfers allowed */
-#define OUTW_OFF(o, val)	do { writeb((char)((val) >> 8), (char __iomem *)np->reg + ncr_offw(o)); writeb((char)(val), (char __iomem *)np->reg + ncr_offw(o) + 1); } while (0)
-#else
-#define OUTW_OFF(o, val)	writew_raw((val), (char __iomem *)np->reg + ncr_offw(o))
-#endif
-#define OUTL_OFF(o, val)	writel_raw((val), (char __iomem *)np->reg + (o))
-
-#endif
-
-#define INB(r)		INB_OFF (offsetof(struct ncr_reg,r))
-#define INW(r)		INW_OFF (offsetof(struct ncr_reg,r))
-#define INL(r)		INL_OFF (offsetof(struct ncr_reg,r))
-
-#define OUTB(r, val)	OUTB_OFF (offsetof(struct ncr_reg,r), (val))
-#define OUTW(r, val)	OUTW_OFF (offsetof(struct ncr_reg,r), (val))
-#define OUTL(r, val)	OUTL_OFF (offsetof(struct ncr_reg,r), (val))
-
-/*
- *  Set bit field ON, OFF 
- */
-
-#define OUTONB(r, m)	OUTB(r, INB(r) | (m))
-#define OUTOFFB(r, m)	OUTB(r, INB(r) & ~(m))
-#define OUTONW(r, m)	OUTW(r, INW(r) | (m))
-#define OUTOFFW(r, m)	OUTW(r, INW(r) & ~(m))
-#define OUTONL(r, m)	OUTL(r, INL(r) | (m))
-#define OUTOFFL(r, m)	OUTL(r, INL(r) & ~(m))
-
-/*
- *  We normally want the chip to have a consistent view
- *  of driver internal data structures when we restart it.
- *  Thus these macros.
- */
-#define OUTL_DSP(v)				\
-	do {					\
-		MEMORY_BARRIER();		\
-		OUTL (nc_dsp, (v));		\
-	} while (0)
-
-#define OUTONB_STD()				\
-	do {					\
-		MEMORY_BARRIER();		\
-		OUTONB (nc_dcntl, (STD|NOCOM));	\
-	} while (0)
-
-
-/*
-**   NCR53C8XX devices features table.
-*/
-struct ncr_chip {
-	unsigned short	revision_id;
-	unsigned char	burst_max;	/* log-base-2 of max burst */
-	unsigned char	offset_max;
-	unsigned char	nr_divisor;
-	unsigned int	features;
-#define FE_LED0		(1<<0)
-#define FE_WIDE		(1<<1)    /* Wide data transfers */
-#define FE_ULTRA	(1<<2)	  /* Ultra speed 20Mtrans/sec */
-#define FE_DBLR		(1<<4)	  /* Clock doubler present */
-#define FE_QUAD		(1<<5)	  /* Clock quadrupler present */
-#define FE_ERL		(1<<6)    /* Enable read line */
-#define FE_CLSE		(1<<7)    /* Cache line size enable */
-#define FE_WRIE		(1<<8)    /* Write & Invalidate enable */
-#define FE_ERMP		(1<<9)    /* Enable read multiple */
-#define FE_BOF		(1<<10)   /* Burst opcode fetch */
-#define FE_DFS		(1<<11)   /* DMA fifo size */
-#define FE_PFEN		(1<<12)   /* Prefetch enable */
-#define FE_LDSTR	(1<<13)   /* Load/Store supported */
-#define FE_RAM		(1<<14)   /* On chip RAM present */
-#define FE_VARCLK	(1<<15)   /* SCSI clock may vary */
-#define FE_RAM8K	(1<<16)   /* On chip RAM sized 8Kb */
-#define FE_64BIT	(1<<17)   /* Have a 64-bit PCI interface */
-#define FE_IO256	(1<<18)   /* Requires full 256 bytes in PCI space */
-#define FE_NOPM		(1<<19)   /* Scripts handles phase mismatch */
-#define FE_LEDC		(1<<20)   /* Hardware control of LED */
-#define FE_DIFF		(1<<21)   /* Support Differential SCSI */
-#define FE_66MHZ 	(1<<23)   /* 66MHz PCI Support */
-#define FE_DAC	 	(1<<24)   /* Support DAC cycles (64 bit addressing) */
-#define FE_ISTAT1 	(1<<25)   /* Have ISTAT1, MBOX0, MBOX1 registers */
-#define FE_DAC_IN_USE	(1<<26)	  /* Platform does DAC cycles */
-#define FE_EHP		(1<<27)   /* 720: Even host parity */
-#define FE_MUX		(1<<28)   /* 720: Multiplexed bus */
-#define FE_EA		(1<<29)   /* 720: Enable Ack */
-
-#define FE_CACHE_SET	(FE_ERL|FE_CLSE|FE_WRIE|FE_ERMP)
-#define FE_SCSI_SET	(FE_WIDE|FE_ULTRA|FE_DBLR|FE_QUAD|F_CLK80)
-#define FE_SPECIAL_SET	(FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM)
-};
-
-
-/*
-**	Driver setup structure.
-**
-**	This structure is initialized from linux config options.
-**	It can be overridden at boot-up by the boot command line.
-*/
-#define SCSI_NCR_MAX_EXCLUDES 8
-struct ncr_driver_setup {
-	u8	master_parity;
-	u8	scsi_parity;
-	u8	disconnection;
-	u8	special_features;
-	u8	force_sync_nego;
-	u8	reverse_probe;
-	u8	pci_fix_up;
-	u8	use_nvram;
-	u8	verbose;
-	u8	default_tags;
-	u16	default_sync;
-	u16	debug;
-	u8	burst_max;
-	u8	led_pin;
-	u8	max_wide;
-	u8	settle_delay;
-	u8	diff_support;
-	u8	irqm;
-	u8	bus_check;
-	u8	optimize;
-	u8	recovery;
-	u8	host_id;
-	u16	iarb;
-	u32	excludes[SCSI_NCR_MAX_EXCLUDES];
-	char	tag_ctrl[100];
-};
-
-/*
-**	Initial setup.
-**	Can be overriden at startup by a command line.
-*/
-#define SCSI_NCR_DRIVER_SETUP			\
-{						\
-	SCSI_NCR_SETUP_MASTER_PARITY,		\
-	SCSI_NCR_SETUP_SCSI_PARITY,		\
-	SCSI_NCR_SETUP_DISCONNECTION,		\
-	SCSI_NCR_SETUP_SPECIAL_FEATURES,	\
-	SCSI_NCR_SETUP_FORCE_SYNC_NEGO,		\
-	0,					\
-	0,					\
-	1,					\
-	0,					\
-	SCSI_NCR_SETUP_DEFAULT_TAGS,		\
-	SCSI_NCR_SETUP_DEFAULT_SYNC,		\
-	0x00,					\
-	7,					\
-	0,					\
-	1,					\
-	SCSI_NCR_SETUP_SETTLE_TIME,		\
-	0,					\
-	0,					\
-	1,					\
-	0,					\
-	0,					\
-	255,					\
-	0x00					\
-}
-
-/*
-**	Boot fail safe setup.
-**	Override initial setup from boot command line:
-**	ncr53c8xx=safe:y
-*/
-#define SCSI_NCR_DRIVER_SAFE_SETUP		\
-{						\
-	0,					\
-	1,					\
-	0,					\
-	0,					\
-	0,					\
-	0,					\
-	0,					\
-	1,					\
-	2,					\
-	0,					\
-	255,					\
-	0x00,					\
-	255,					\
-	0,					\
-	0,					\
-	10,					\
-	1,					\
-	1,					\
-	1,					\
-	0,					\
-	0,					\
-	255					\
-}
-
-/**************** ORIGINAL CONTENT of ncrreg.h from FreeBSD ******************/
-
-/*-----------------------------------------------------------------
-**
-**	The ncr 53c810 register structure.
-**
-**-----------------------------------------------------------------
-*/
-
-struct ncr_reg {
-/*00*/  u8	nc_scntl0;    /* full arb., ena parity, par->ATN  */
-
-/*01*/  u8	nc_scntl1;    /* no reset                         */
-        #define   ISCON   0x10  /* connected to scsi		    */
-        #define   CRST    0x08  /* force reset                      */
-        #define   IARB    0x02  /* immediate arbitration            */
-
-/*02*/  u8	nc_scntl2;    /* no disconnect expected           */
-	#define   SDU     0x80  /* cmd: disconnect will raise error */
-	#define   CHM     0x40  /* sta: chained mode                */
-	#define   WSS     0x08  /* sta: wide scsi send           [W]*/
-	#define   WSR     0x01  /* sta: wide scsi received       [W]*/
-
-/*03*/  u8	nc_scntl3;    /* cnf system clock dependent       */
-	#define   EWS     0x08  /* cmd: enable wide scsi         [W]*/
-	#define   ULTRA   0x80  /* cmd: ULTRA enable                */
-				/* bits 0-2, 7 rsvd for C1010       */
-
-/*04*/  u8	nc_scid;	/* cnf host adapter scsi address    */
-	#define   RRE     0x40  /* r/w:e enable response to resel.  */
-	#define   SRE     0x20  /* r/w:e enable response to select  */
-
-/*05*/  u8	nc_sxfer;	/* ### Sync speed and count         */
-				/* bits 6-7 rsvd for C1010          */
-
-/*06*/  u8	nc_sdid;	/* ### Destination-ID               */
-
-/*07*/  u8	nc_gpreg;	/* ??? IO-Pins                      */
-
-/*08*/  u8	nc_sfbr;	/* ### First byte in phase          */
-
-/*09*/  u8	nc_socl;
-	#define   CREQ	  0x80	/* r/w: SCSI-REQ                    */
-	#define   CACK	  0x40	/* r/w: SCSI-ACK                    */
-	#define   CBSY	  0x20	/* r/w: SCSI-BSY                    */
-	#define   CSEL	  0x10	/* r/w: SCSI-SEL                    */
-	#define   CATN	  0x08	/* r/w: SCSI-ATN                    */
-	#define   CMSG	  0x04	/* r/w: SCSI-MSG                    */
-	#define   CC_D	  0x02	/* r/w: SCSI-C_D                    */
-	#define   CI_O	  0x01	/* r/w: SCSI-I_O                    */
-
-/*0a*/  u8	nc_ssid;
-
-/*0b*/  u8	nc_sbcl;
-
-/*0c*/  u8	nc_dstat;
-        #define   DFE     0x80  /* sta: dma fifo empty              */
-        #define   MDPE    0x40  /* int: master data parity error    */
-        #define   BF      0x20  /* int: script: bus fault           */
-        #define   ABRT    0x10  /* int: script: command aborted     */
-        #define   SSI     0x08  /* int: script: single step         */
-        #define   SIR     0x04  /* int: script: interrupt instruct. */
-        #define   IID     0x01  /* int: script: illegal instruct.   */
-
-/*0d*/  u8	nc_sstat0;
-        #define   ILF     0x80  /* sta: data in SIDL register lsb   */
-        #define   ORF     0x40  /* sta: data in SODR register lsb   */
-        #define   OLF     0x20  /* sta: data in SODL register lsb   */
-        #define   AIP     0x10  /* sta: arbitration in progress     */
-        #define   LOA     0x08  /* sta: arbitration lost            */
-        #define   WOA     0x04  /* sta: arbitration won             */
-        #define   IRST    0x02  /* sta: scsi reset signal           */
-        #define   SDP     0x01  /* sta: scsi parity signal          */
-
-/*0e*/  u8	nc_sstat1;
-	#define   FF3210  0xf0	/* sta: bytes in the scsi fifo      */
-
-/*0f*/  u8	nc_sstat2;
-        #define   ILF1    0x80  /* sta: data in SIDL register msb[W]*/
-        #define   ORF1    0x40  /* sta: data in SODR register msb[W]*/
-        #define   OLF1    0x20  /* sta: data in SODL register msb[W]*/
-        #define   DM      0x04  /* sta: DIFFSENS mismatch (895/6 only) */
-        #define   LDSC    0x02  /* sta: disconnect & reconnect      */
-
-/*10*/  u8	nc_dsa;	/* --> Base page                    */
-/*11*/  u8	nc_dsa1;
-/*12*/  u8	nc_dsa2;
-/*13*/  u8	nc_dsa3;
-
-/*14*/  u8	nc_istat;	/* --> Main Command and status      */
-        #define   CABRT   0x80  /* cmd: abort current operation     */
-        #define   SRST    0x40  /* mod: reset chip                  */
-        #define   SIGP    0x20  /* r/w: message from host to ncr    */
-        #define   SEM     0x10  /* r/w: message between host + ncr  */
-        #define   CON     0x08  /* sta: connected to scsi           */
-        #define   INTF    0x04  /* sta: int on the fly (reset by wr)*/
-        #define   SIP     0x02  /* sta: scsi-interrupt              */
-        #define   DIP     0x01  /* sta: host/script interrupt       */
-
-/*15*/  u8	nc_istat1;	/* 896 and later cores only */
-        #define   FLSH    0x04  /* sta: chip is flushing            */
-        #define   SRUN    0x02  /* sta: scripts are running         */
-        #define   SIRQD   0x01  /* r/w: disable INT pin             */
-
-/*16*/  u8	nc_mbox0;	/* 896 and later cores only */
-/*17*/  u8	nc_mbox1;	/* 896 and later cores only */
-
-/*18*/	u8	nc_ctest0;
-	#define   EHP     0x04	/* 720 even host parity             */
-/*19*/  u8	nc_ctest1;
-
-/*1a*/  u8	nc_ctest2;
-	#define   CSIGP   0x40
-				/* bits 0-2,7 rsvd for C1010        */
-
-/*1b*/  u8	nc_ctest3;
-	#define   FLF     0x08  /* cmd: flush dma fifo              */
-	#define   CLF	  0x04	/* cmd: clear dma fifo		    */
-	#define   FM      0x02  /* mod: fetch pin mode              */
-	#define   WRIE    0x01  /* mod: write and invalidate enable */
-				/* bits 4-7 rsvd for C1010          */
-
-/*1c*/  u32    nc_temp;	/* ### Temporary stack              */
-
-/*20*/	u8	nc_dfifo;
-/*21*/  u8	nc_ctest4;
-	#define   MUX     0x80  /* 720 host bus multiplex mode      */
-	#define   BDIS    0x80  /* mod: burst disable               */
-	#define   MPEE    0x08  /* mod: master parity error enable  */
-
-/*22*/  u8	nc_ctest5;
-	#define   DFS     0x20  /* mod: dma fifo size               */
-				/* bits 0-1, 3-7 rsvd for C1010          */
-/*23*/  u8	nc_ctest6;
-
-/*24*/  u32    nc_dbc;	/* ### Byte count and command       */
-/*28*/  u32    nc_dnad;	/* ### Next command register        */
-/*2c*/  u32    nc_dsp;	/* --> Script Pointer               */
-/*30*/  u32    nc_dsps;	/* --> Script pointer save/opcode#2 */
-
-/*34*/  u8	nc_scratcha;  /* Temporary register a            */
-/*35*/  u8	nc_scratcha1;
-/*36*/  u8	nc_scratcha2;
-/*37*/  u8	nc_scratcha3;
-
-/*38*/  u8	nc_dmode;
-	#define   BL_2    0x80  /* mod: burst length shift value +2 */
-	#define   BL_1    0x40  /* mod: burst length shift value +1 */
-	#define   ERL     0x08  /* mod: enable read line            */
-	#define   ERMP    0x04  /* mod: enable read multiple        */
-	#define   BOF     0x02  /* mod: burst op code fetch         */
-
-/*39*/  u8	nc_dien;
-/*3a*/  u8	nc_sbr;
-
-/*3b*/  u8	nc_dcntl;	/* --> Script execution control     */
-	#define   CLSE    0x80  /* mod: cache line size enable      */
-	#define   PFF     0x40  /* cmd: pre-fetch flush             */
-	#define   PFEN    0x20  /* mod: pre-fetch enable            */
-	#define   EA      0x20  /* mod: 720 enable-ack              */
-	#define   SSM     0x10  /* mod: single step mode            */
-	#define   IRQM    0x08  /* mod: irq mode (1 = totem pole !) */
-	#define   STD     0x04  /* cmd: start dma mode              */
-	#define   IRQD    0x02  /* mod: irq disable                 */
- 	#define	  NOCOM   0x01	/* cmd: protect sfbr while reselect */
-				/* bits 0-1 rsvd for C1010          */
-
-/*3c*/  u32	nc_adder;
-
-/*40*/  u16	nc_sien;	/* -->: interrupt enable            */
-/*42*/  u16	nc_sist;	/* <--: interrupt status            */
-        #define   SBMC    0x1000/* sta: SCSI Bus Mode Change (895/6 only) */
-        #define   STO     0x0400/* sta: timeout (select)            */
-        #define   GEN     0x0200/* sta: timeout (general)           */
-        #define   HTH     0x0100/* sta: timeout (handshake)         */
-        #define   MA      0x80  /* sta: phase mismatch              */
-        #define   CMP     0x40  /* sta: arbitration complete        */
-        #define   SEL     0x20  /* sta: selected by another device  */
-        #define   RSL     0x10  /* sta: reselected by another device*/
-        #define   SGE     0x08  /* sta: gross error (over/underflow)*/
-        #define   UDC     0x04  /* sta: unexpected disconnect       */
-        #define   RST     0x02  /* sta: scsi bus reset detected     */
-        #define   PAR     0x01  /* sta: scsi parity error           */
-
-/*44*/  u8	nc_slpar;
-/*45*/  u8	nc_swide;
-/*46*/  u8	nc_macntl;
-/*47*/  u8	nc_gpcntl;
-/*48*/  u8	nc_stime0;    /* cmd: timeout for select&handshake*/
-/*49*/  u8	nc_stime1;    /* cmd: timeout user defined        */
-/*4a*/  u16   nc_respid;    /* sta: Reselect-IDs                */
-
-/*4c*/  u8	nc_stest0;
-
-/*4d*/  u8	nc_stest1;
-	#define   SCLK    0x80	/* Use the PCI clock as SCSI clock	*/
-	#define   DBLEN   0x08	/* clock doubler running		*/
-	#define   DBLSEL  0x04	/* clock doubler selected		*/
-  
-
-/*4e*/  u8	nc_stest2;
-	#define   ROF     0x40	/* reset scsi offset (after gross error!) */
-	#define   DIF     0x20  /* 720 SCSI differential mode             */
-	#define   EXT     0x02  /* extended filtering                     */
-
-/*4f*/  u8	nc_stest3;
-	#define   TE     0x80	/* c: tolerAnt enable */
-	#define   HSC    0x20	/* c: Halt SCSI Clock */
-	#define   CSF    0x02	/* c: clear scsi fifo */
-
-/*50*/  u16   nc_sidl;	/* Lowlevel: latched from scsi data */
-/*52*/  u8	nc_stest4;
-	#define   SMODE  0xc0	/* SCSI bus mode      (895/6 only) */
-	#define    SMODE_HVD 0x40	/* High Voltage Differential       */
-	#define    SMODE_SE  0x80	/* Single Ended                    */
-	#define    SMODE_LVD 0xc0	/* Low Voltage Differential        */
-	#define   LCKFRQ 0x20	/* Frequency Lock (895/6 only)     */
-				/* bits 0-5 rsvd for C1010          */
-
-/*53*/  u8	nc_53_;
-/*54*/  u16	nc_sodl;	/* Lowlevel: data out to scsi data  */
-/*56*/	u8	nc_ccntl0;	/* Chip Control 0 (896)             */
-	#define   ENPMJ  0x80	/* Enable Phase Mismatch Jump       */
-	#define   PMJCTL 0x40	/* Phase Mismatch Jump Control      */
-	#define   ENNDJ  0x20	/* Enable Non Data PM Jump          */
-	#define   DISFC  0x10	/* Disable Auto FIFO Clear          */
-	#define   DILS   0x02	/* Disable Internal Load/Store      */
-	#define   DPR    0x01	/* Disable Pipe Req                 */
-
-/*57*/	u8	nc_ccntl1;	/* Chip Control 1 (896)             */
-	#define   ZMOD   0x80	/* High Impedance Mode              */
-	#define	  DIC	 0x10	/* Disable Internal Cycles	    */
-	#define   DDAC   0x08	/* Disable Dual Address Cycle       */
-	#define   XTIMOD 0x04	/* 64-bit Table Ind. Indexing Mode  */
-	#define   EXTIBMV 0x02	/* Enable 64-bit Table Ind. BMOV    */
-	#define   EXDBMV 0x01	/* Enable 64-bit Direct BMOV        */
-
-/*58*/  u16	nc_sbdl;	/* Lowlevel: data from scsi data    */
-/*5a*/  u16	nc_5a_;
-
-/*5c*/  u8	nc_scr0;	/* Working register B               */
-/*5d*/  u8	nc_scr1;	/*                                  */
-/*5e*/  u8	nc_scr2;	/*                                  */
-/*5f*/  u8	nc_scr3;	/*                                  */
-
-/*60*/  u8	nc_scrx[64];	/* Working register C-R             */
-/*a0*/	u32	nc_mmrs;	/* Memory Move Read Selector        */
-/*a4*/	u32	nc_mmws;	/* Memory Move Write Selector       */
-/*a8*/	u32	nc_sfs;		/* Script Fetch Selector            */
-/*ac*/	u32	nc_drs;		/* DSA Relative Selector            */
-/*b0*/	u32	nc_sbms;	/* Static Block Move Selector       */
-/*b4*/	u32	nc_dbms;	/* Dynamic Block Move Selector      */
-/*b8*/	u32	nc_dnad64;	/* DMA Next Address 64              */
-/*bc*/	u16	nc_scntl4;	/* C1010 only                       */
-	#define   U3EN   0x80	/* Enable Ultra 3                   */
-	#define   AIPEN	 0x40   /* Allow check upper byte lanes     */
-	#define   XCLKH_DT 0x08 /* Extra clock of data hold on DT
-					transfer edge	            */
-	#define   XCLKH_ST 0x04 /* Extra clock of data hold on ST
-					transfer edge	            */
-
-/*be*/  u8	nc_aipcntl0;	/* Epat Control 1 C1010 only        */
-/*bf*/  u8	nc_aipcntl1;	/* AIP Control C1010_66 Only        */
-
-/*c0*/	u32	nc_pmjad1;	/* Phase Mismatch Jump Address 1    */
-/*c4*/	u32	nc_pmjad2;	/* Phase Mismatch Jump Address 2    */
-/*c8*/	u8	nc_rbc;		/* Remaining Byte Count             */
-/*c9*/	u8	nc_rbc1;	/*                                  */
-/*ca*/	u8	nc_rbc2;	/*                                  */
-/*cb*/	u8	nc_rbc3;	/*                                  */
-
-/*cc*/	u8	nc_ua;		/* Updated Address                  */
-/*cd*/	u8	nc_ua1;		/*                                  */
-/*ce*/	u8	nc_ua2;		/*                                  */
-/*cf*/	u8	nc_ua3;		/*                                  */
-/*d0*/	u32	nc_esa;		/* Entry Storage Address            */
-/*d4*/	u8	nc_ia;		/* Instruction Address              */
-/*d5*/	u8	nc_ia1;
-/*d6*/	u8	nc_ia2;
-/*d7*/	u8	nc_ia3;
-/*d8*/	u32	nc_sbc;		/* SCSI Byte Count (3 bytes only)   */
-/*dc*/	u32	nc_csbc;	/* Cumulative SCSI Byte Count       */
-
-				/* Following for C1010 only         */
-/*e0*/  u16	nc_crcpad;	/* CRC Value                        */
-/*e2*/  u8	nc_crccntl0;	/* CRC control register             */
-	#define   SNDCRC  0x10	/* Send CRC Request                 */
-/*e3*/  u8	nc_crccntl1;	/* CRC control register             */
-/*e4*/  u32	nc_crcdata;	/* CRC data register                */ 
-/*e8*/  u32	nc_e8_;		/* rsvd 			    */
-/*ec*/  u32	nc_ec_;		/* rsvd 			    */
-/*f0*/  u16	nc_dfbc;	/* DMA FIFO byte count              */ 
-
-};
-
-/*-----------------------------------------------------------
-**
-**	Utility macros for the script.
-**
-**-----------------------------------------------------------
-*/
-
-#define REGJ(p,r) (offsetof(struct ncr_reg, p ## r))
-#define REG(r) REGJ (nc_, r)
-
-typedef u32 ncrcmd;
-
-/*-----------------------------------------------------------
-**
-**	SCSI phases
-**
-**	DT phases illegal for ncr driver.
-**
-**-----------------------------------------------------------
-*/
-
-#define	SCR_DATA_OUT	0x00000000
-#define	SCR_DATA_IN	0x01000000
-#define	SCR_COMMAND	0x02000000
-#define	SCR_STATUS	0x03000000
-#define SCR_DT_DATA_OUT	0x04000000
-#define SCR_DT_DATA_IN	0x05000000
-#define SCR_MSG_OUT	0x06000000
-#define SCR_MSG_IN      0x07000000
-
-#define SCR_ILG_OUT	0x04000000
-#define SCR_ILG_IN	0x05000000
-
-/*-----------------------------------------------------------
-**
-**	Data transfer via SCSI.
-**
-**-----------------------------------------------------------
-**
-**	MOVE_ABS (LEN)
-**	<<start address>>
-**
-**	MOVE_IND (LEN)
-**	<<dnad_offset>>
-**
-**	MOVE_TBL
-**	<<dnad_offset>>
-**
-**-----------------------------------------------------------
-*/
-
-#define OPC_MOVE          0x08000000
-
-#define SCR_MOVE_ABS(l) ((0x00000000 | OPC_MOVE) | (l))
-#define SCR_MOVE_IND(l) ((0x20000000 | OPC_MOVE) | (l))
-#define SCR_MOVE_TBL     (0x10000000 | OPC_MOVE)
-
-#define SCR_CHMOV_ABS(l) ((0x00000000) | (l))
-#define SCR_CHMOV_IND(l) ((0x20000000) | (l))
-#define SCR_CHMOV_TBL     (0x10000000)
-
-struct scr_tblmove {
-        u32  size;
-        u32  addr;
-};
-
-/*-----------------------------------------------------------
-**
-**	Selection
-**
-**-----------------------------------------------------------
-**
-**	SEL_ABS | SCR_ID (0..15)    [ | REL_JMP]
-**	<<alternate_address>>
-**
-**	SEL_TBL | << dnad_offset>>  [ | REL_JMP]
-**	<<alternate_address>>
-**
-**-----------------------------------------------------------
-*/
-
-#define	SCR_SEL_ABS	0x40000000
-#define	SCR_SEL_ABS_ATN	0x41000000
-#define	SCR_SEL_TBL	0x42000000
-#define	SCR_SEL_TBL_ATN	0x43000000
-
-
-#ifdef SCSI_NCR_BIG_ENDIAN
-struct scr_tblsel {
-        u8	sel_scntl3;
-        u8	sel_id;
-        u8	sel_sxfer;
-        u8	sel_scntl4;	
-};
-#else
-struct scr_tblsel {
-        u8	sel_scntl4;	
-        u8	sel_sxfer;
-        u8	sel_id;
-        u8	sel_scntl3;
-};
-#endif
-
-#define SCR_JMP_REL     0x04000000
-#define SCR_ID(id)	(((u32)(id)) << 16)
-
-/*-----------------------------------------------------------
-**
-**	Waiting for Disconnect or Reselect
-**
-**-----------------------------------------------------------
-**
-**	WAIT_DISC
-**	dummy: <<alternate_address>>
-**
-**	WAIT_RESEL
-**	<<alternate_address>>
-**
-**-----------------------------------------------------------
-*/
-
-#define	SCR_WAIT_DISC	0x48000000
-#define SCR_WAIT_RESEL  0x50000000
-
-/*-----------------------------------------------------------
-**
-**	Bit Set / Reset
-**
-**-----------------------------------------------------------
-**
-**	SET (flags {|.. })
-**
-**	CLR (flags {|.. })
-**
-**-----------------------------------------------------------
-*/
-
-#define SCR_SET(f)     (0x58000000 | (f))
-#define SCR_CLR(f)     (0x60000000 | (f))
-
-#define	SCR_CARRY	0x00000400
-#define	SCR_TRG		0x00000200
-#define	SCR_ACK		0x00000040
-#define	SCR_ATN		0x00000008
-
-
-
-
-/*-----------------------------------------------------------
-**
-**	Memory to memory move
-**
-**-----------------------------------------------------------
-**
-**	COPY (bytecount)
-**	<< source_address >>
-**	<< destination_address >>
-**
-**	SCR_COPY   sets the NO FLUSH option by default.
-**	SCR_COPY_F does not set this option.
-**
-**	For chips which do not support this option,
-**	ncr_copy_and_bind() will remove this bit.
-**-----------------------------------------------------------
-*/
-
-#define SCR_NO_FLUSH 0x01000000
-
-#define SCR_COPY(n) (0xc0000000 | SCR_NO_FLUSH | (n))
-#define SCR_COPY_F(n) (0xc0000000 | (n))
-
-/*-----------------------------------------------------------
-**
-**	Register move and binary operations
-**
-**-----------------------------------------------------------
-**
-**	SFBR_REG (reg, op, data)        reg  = SFBR op data
-**	<< 0 >>
-**
-**	REG_SFBR (reg, op, data)        SFBR = reg op data
-**	<< 0 >>
-**
-**	REG_REG  (reg, op, data)        reg  = reg op data
-**	<< 0 >>
-**
-**-----------------------------------------------------------
-**	On 810A, 860, 825A, 875, 895 and 896 chips the content 
-**	of SFBR register can be used as data (SCR_SFBR_DATA).
-**	The 896 has additionnal IO registers starting at 
-**	offset 0x80. Bit 7 of register offset is stored in 
-**	bit 7 of the SCRIPTS instruction first DWORD.
-**-----------------------------------------------------------
-*/
-
-#define SCR_REG_OFS(ofs) ((((ofs) & 0x7f) << 16ul) + ((ofs) & 0x80)) 
-
-#define SCR_SFBR_REG(reg,op,data) \
-        (0x68000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
-
-#define SCR_REG_SFBR(reg,op,data) \
-        (0x70000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
-
-#define SCR_REG_REG(reg,op,data) \
-        (0x78000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
-
-
-#define      SCR_LOAD   0x00000000
-#define      SCR_SHL    0x01000000
-#define      SCR_OR     0x02000000
-#define      SCR_XOR    0x03000000
-#define      SCR_AND    0x04000000
-#define      SCR_SHR    0x05000000
-#define      SCR_ADD    0x06000000
-#define      SCR_ADDC   0x07000000
-
-#define      SCR_SFBR_DATA   (0x00800000>>8ul)	/* Use SFBR as data */
-
-/*-----------------------------------------------------------
-**
-**	FROM_REG (reg)		  SFBR = reg
-**	<< 0 >>
-**
-**	TO_REG	 (reg)		  reg  = SFBR
-**	<< 0 >>
-**
-**	LOAD_REG (reg, data)	  reg  = <data>
-**	<< 0 >>
-**
-**	LOAD_SFBR(data) 	  SFBR = <data>
-**	<< 0 >>
-**
-**-----------------------------------------------------------
-*/
-
-#define	SCR_FROM_REG(reg) \
-	SCR_REG_SFBR(reg,SCR_OR,0)
-
-#define	SCR_TO_REG(reg) \
-	SCR_SFBR_REG(reg,SCR_OR,0)
-
-#define	SCR_LOAD_REG(reg,data) \
-	SCR_REG_REG(reg,SCR_LOAD,data)
-
-#define SCR_LOAD_SFBR(data) \
-        (SCR_REG_SFBR (gpreg, SCR_LOAD, data))
-
-/*-----------------------------------------------------------
-**
-**	LOAD  from memory   to register.
-**	STORE from register to memory.
-**
-**	Only supported by 810A, 860, 825A, 875, 895 and 896.
-**
-**-----------------------------------------------------------
-**
-**	LOAD_ABS (LEN)
-**	<<start address>>
-**
-**	LOAD_REL (LEN)        (DSA relative)
-**	<<dsa_offset>>
-**
-**-----------------------------------------------------------
-*/
-
-#define SCR_REG_OFS2(ofs) (((ofs) & 0xff) << 16ul)
-#define SCR_NO_FLUSH2	0x02000000
-#define SCR_DSA_REL2	0x10000000
-
-#define SCR_LOAD_R(reg, how, n) \
-        (0xe1000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
-
-#define SCR_STORE_R(reg, how, n) \
-        (0xe0000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
-
-#define SCR_LOAD_ABS(reg, n)	SCR_LOAD_R(reg, SCR_NO_FLUSH2, n)
-#define SCR_LOAD_REL(reg, n)	SCR_LOAD_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2, n)
-#define SCR_LOAD_ABS_F(reg, n)	SCR_LOAD_R(reg, 0, n)
-#define SCR_LOAD_REL_F(reg, n)	SCR_LOAD_R(reg, SCR_DSA_REL2, n)
-
-#define SCR_STORE_ABS(reg, n)	SCR_STORE_R(reg, SCR_NO_FLUSH2, n)
-#define SCR_STORE_REL(reg, n)	SCR_STORE_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2,n)
-#define SCR_STORE_ABS_F(reg, n)	SCR_STORE_R(reg, 0, n)
-#define SCR_STORE_REL_F(reg, n)	SCR_STORE_R(reg, SCR_DSA_REL2, n)
-
-
-/*-----------------------------------------------------------
-**
-**	Waiting for Disconnect or Reselect
-**
-**-----------------------------------------------------------
-**
-**	JUMP            [ | IFTRUE/IFFALSE ( ... ) ]
-**	<<address>>
-**
-**	JUMPR           [ | IFTRUE/IFFALSE ( ... ) ]
-**	<<distance>>
-**
-**	CALL            [ | IFTRUE/IFFALSE ( ... ) ]
-**	<<address>>
-**
-**	CALLR           [ | IFTRUE/IFFALSE ( ... ) ]
-**	<<distance>>
-**
-**	RETURN          [ | IFTRUE/IFFALSE ( ... ) ]
-**	<<dummy>>
-**
-**	INT             [ | IFTRUE/IFFALSE ( ... ) ]
-**	<<ident>>
-**
-**	INT_FLY         [ | IFTRUE/IFFALSE ( ... ) ]
-**	<<ident>>
-**
-**	Conditions:
-**	     WHEN (phase)
-**	     IF   (phase)
-**	     CARRYSET
-**	     DATA (data, mask)
-**
-**-----------------------------------------------------------
-*/
-
-#define SCR_NO_OP       0x80000000
-#define SCR_JUMP        0x80080000
-#define SCR_JUMP64      0x80480000
-#define SCR_JUMPR       0x80880000
-#define SCR_CALL        0x88080000
-#define SCR_CALLR       0x88880000
-#define SCR_RETURN      0x90080000
-#define SCR_INT         0x98080000
-#define SCR_INT_FLY     0x98180000
-
-#define IFFALSE(arg)   (0x00080000 | (arg))
-#define IFTRUE(arg)    (0x00000000 | (arg))
-
-#define WHEN(phase)    (0x00030000 | (phase))
-#define IF(phase)      (0x00020000 | (phase))
-
-#define DATA(D)        (0x00040000 | ((D) & 0xff))
-#define MASK(D,M)      (0x00040000 | (((M ^ 0xff) & 0xff) << 8ul)|((D) & 0xff))
-
-#define CARRYSET       (0x00200000)
-
-/*-----------------------------------------------------------
-**
-**	SCSI  constants.
-**
-**-----------------------------------------------------------
-*/
-
-/*
-**	Messages
-*/
-
-#define	M_COMPLETE	COMMAND_COMPLETE
-#define	M_EXTENDED	EXTENDED_MESSAGE
-#define	M_SAVE_DP	SAVE_POINTERS
-#define	M_RESTORE_DP	RESTORE_POINTERS
-#define	M_DISCONNECT	DISCONNECT
-#define	M_ID_ERROR	INITIATOR_ERROR
-#define	M_ABORT		ABORT_TASK_SET
-#define	M_REJECT	MESSAGE_REJECT
-#define	M_NOOP		NOP
-#define	M_PARITY	MSG_PARITY_ERROR
-#define	M_LCOMPLETE	LINKED_CMD_COMPLETE
-#define	M_FCOMPLETE	LINKED_FLG_CMD_COMPLETE
-#define	M_RESET		TARGET_RESET
-#define	M_ABORT_TAG	ABORT_TASK
-#define	M_CLEAR_QUEUE	CLEAR_TASK_SET
-#define	M_INIT_REC	INITIATE_RECOVERY
-#define	M_REL_REC	RELEASE_RECOVERY
-#define	M_TERMINATE	(0x11)
-#define	M_SIMPLE_TAG	SIMPLE_QUEUE_TAG
-#define	M_HEAD_TAG	HEAD_OF_QUEUE_TAG
-#define	M_ORDERED_TAG	ORDERED_QUEUE_TAG
-#define	M_IGN_RESIDUE	IGNORE_WIDE_RESIDUE
-#define	M_IDENTIFY   	(0x80)
-
-#define	M_X_MODIFY_DP	EXTENDED_MODIFY_DATA_POINTER
-#define	M_X_SYNC_REQ	EXTENDED_SDTR
-#define	M_X_WIDE_REQ	EXTENDED_WDTR
-#define	M_X_PPR_REQ	EXTENDED_PPR
-
-/*
-**	Status
-*/
-
-#define	S_GOOD		(0x00)
-#define	S_CHECK_COND	(0x02)
-#define	S_COND_MET	(0x04)
-#define	S_BUSY		(0x08)
-#define	S_INT		(0x10)
-#define	S_INT_COND_MET	(0x14)
-#define	S_CONFLICT	(0x18)
-#define	S_TERMINATED	(0x20)
-#define	S_QUEUE_FULL	(0x28)
-#define	S_ILLEGAL	(0xff)
-#define	S_SENSE		(0x80)
-
-/*
- * End of ncrreg from FreeBSD
- */
-
-#endif /* defined SYM53C8XX_DEFS_H */