[SCSI] Remove ->pid field from scsi_cmnd

The pid field is a duplicate of the serial_number field and has been
scheduled for removal for a long time.  A few drivers were still using
it, so just change them to use serial_number instead.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

1 files changed, 9 insertions, 9 deletions

diff --git a/drivers/scsi/tmscsim.c b/drivers/scsi/tmscsim.c
index 5db1520f8ba..5c72ca31a47 100644
--- a/drivers/scsi/tmscsim.c
+++ b/drivers/scsi/tmscsim.c
@@ -567,12 +567,12 @@ dc390_StartSCSI( struct dc390_acb* pACB, struct dc390_dcb* pDCB, struct dc390_sr
 	pDCB->TagMask |= 1 << tag[1];
 	pSRB->TagNumber = tag[1];
 	DC390_write8(ScsiFifo, tag[1]);
-	DEBUG1(printk(KERN_INFO "DC390: Select w/DisCn for Cmd %li (SRB %p), block tag %02x\n", scmd->pid, pSRB, tag[1]));
+	DEBUG1(printk(KERN_INFO "DC390: Select w/DisCn for Cmd %li (SRB %p), block tag %02x\n", scmd->serial_number, pSRB, tag[1]));
 	cmd = SEL_W_ATN3;
     } else {
 	/* No TagQ */
 //no_tag:
-	DEBUG1(printk(KERN_INFO "DC390: Select w%s/DisCn for Cmd %li (SRB %p), No TagQ\n", disc_allowed ? "" : "o", scmd->pid, pSRB));
+	DEBUG1(printk(KERN_INFO "DC390: Select w%s/DisCn for Cmd %li (SRB %p), No TagQ\n", disc_allowed ? "" : "o", scmd->serial_number, pSRB));
     }
 
     pSRB->SRBState = SRB_START_;
@@ -623,7 +623,7 @@ dc390_StartSCSI( struct dc390_acb* pACB, struct dc390_dcb* pDCB, struct dc390_sr
     {
 	dc390_freetag (pDCB, pSRB);
 	DEBUG0(printk ("DC390: Interrupt during Start SCSI (pid %li, target %02i-%02i)\n",
-		scmd->pid, scmd->device->id, scmd->device->lun));
+		scmd->serial_number, scmd->device->id, scmd->device->lun));
 	pSRB->SRBState = SRB_READY;
 	//DC390_write8 (ScsiCmd, CLEAR_FIFO_CMD);
 	pACB->SelLost++;
@@ -1708,7 +1708,7 @@ dc390_SRBdone( struct dc390_acb* pACB, struct dc390_dcb* pDCB, struct dc390_srb*
     status = pSRB->TargetStatus;
 
     DEBUG0(printk (" SRBdone (%02x,%08x), SRB %p, pid %li\n", status, pcmd->result,\
-		pSRB, pcmd->pid));
+		pSRB, pcmd->serial_number));
     if(pSRB->SRBFlag & AUTO_REQSENSE)
     {	/* Last command was a Request Sense */
 	pSRB->SRBFlag &= ~AUTO_REQSENSE;
@@ -1729,7 +1729,7 @@ dc390_SRBdone( struct dc390_acb* pACB, struct dc390_dcb* pDCB, struct dc390_srb*
 	    } else {
 		SET_RES_DRV(pcmd->result, DRIVER_SENSE);
 		//pSRB->ScsiCmdLen	 = (u8) (pSRB->Segment1[0] >> 8);
-		DEBUG0 (printk ("DC390: RETRY pid %li (%02x), target %02i-%02i\n", pcmd->pid, pcmd->cmnd[0], pcmd->device->id, pcmd->device->lun));
+		DEBUG0 (printk ("DC390: RETRY pid %li (%02x), target %02i-%02i\n", pcmd->serial_number, pcmd->cmnd[0], pcmd->device->id, pcmd->device->lun));
 		pSRB->TotalXferredLen = 0;
 		SET_RES_DID(pcmd->result, DID_SOFT_ERROR);
 	    }
@@ -1749,7 +1749,7 @@ dc390_SRBdone( struct dc390_acb* pACB, struct dc390_dcb* pDCB, struct dc390_srb*
 	else if (status == SAM_STAT_TASK_SET_FULL)
 	{
 	    scsi_track_queue_full(pcmd->device, pDCB->GoingSRBCnt - 1);
-	    DEBUG0 (printk ("DC390: RETRY pid %li (%02x), target %02i-%02i\n", pcmd->pid, pcmd->cmnd[0], pcmd->device->id, pcmd->device->lun));
+	    DEBUG0 (printk ("DC390: RETRY pid %li (%02x), target %02i-%02i\n", pcmd->serial_number, pcmd->cmnd[0], pcmd->device->id, pcmd->device->lun));
 	    pSRB->TotalXferredLen = 0;
 	    SET_RES_DID(pcmd->result, DID_SOFT_ERROR);
 	}
@@ -1803,7 +1803,7 @@ cmd_done:
     /* Add to free list */
     dc390_Free_insert (pACB, pSRB);
 
-    DEBUG0(printk (KERN_DEBUG "DC390: SRBdone: done pid %li\n", pcmd->pid));
+    DEBUG0(printk (KERN_DEBUG "DC390: SRBdone: done pid %li\n", pcmd->serial_number));
     pcmd->scsi_done (pcmd);
 
     return;
@@ -1998,7 +1998,7 @@ static int DC390_abort(struct scsi_cmnd *cmd)
 	struct dc390_dcb *pDCB = (struct dc390_dcb*) cmd->device->hostdata;
 
 	scmd_printk(KERN_WARNING, cmd,
-		"DC390: Abort command (pid %li)\n", cmd->pid);
+		"DC390: Abort command (pid %li)\n", cmd->serial_number);
 
 	/* abort() is too stupid for already sent commands at the moment. 
 	 * If it's called we are in trouble anyway, so let's dump some info 
@@ -2006,7 +2006,7 @@ static int DC390_abort(struct scsi_cmnd *cmd)
 	dc390_dumpinfo(pACB, pDCB, NULL);
 
 	pDCB->DCBFlag |= ABORT_DEV_;
-	printk(KERN_INFO "DC390: Aborted pid %li\n", cmd->pid);
+	printk(KERN_INFO "DC390: Aborted pid %li\n", cmd->serial_number);
 
 	return FAILED;
 }