diff options
author | Christoph Hellwig <hch@lst.de> | 2005-07-04 17:48:30 +0200 |
---|---|---|
committer | James Bottomley <jejb@mulgrave.(none)> | 2005-08-02 11:43:45 -0500 |
commit | 2b55cac3d2d9f545c141748d00eae86e2c042ca5 (patch) | |
tree | 84d3fdf015dda660e05c9dbafbc953fa1b42192e /drivers/scsi | |
parent | 8af50dcd22aa0a5840f18276ff10a6977abc3853 (diff) |
[SCSI] qla1280: misc cleanups
print message tidy ups and some excess brace removal.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thiemo Seufer <ths@linux-mips.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Diffstat (limited to 'drivers/scsi')
-rw-r--r-- | drivers/scsi/qla1280.c | 26 |
1 files changed, 14 insertions, 12 deletions
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c index 58ecdc69667..e5354550d76 100644 --- a/drivers/scsi/qla1280.c +++ b/drivers/scsi/qla1280.c @@ -1459,7 +1459,6 @@ qla1280_select_queue_depth(struct Scsi_Host *host, struct scsi_device *sdev_q) * * Input: * ha = adapter block pointer. - * done_q = done queue. */ static void qla1280_done(struct scsi_qla_host *ha) @@ -1593,7 +1592,7 @@ qla1280_return_status(struct response * sts, struct scsi_cmnd *cp) case CS_DATA_OVERRUN: dprintk(2, "Data overrun 0x%x\n", residual_length); - dprintk(2, "qla1280_isr: response packet data\n"); + dprintk(2, "qla1280_return_status: response packet data\n"); qla1280_dump_buffer(2, (char *)sts, RESPONSE_ENTRY_SIZE); host_status = DID_ERROR; break; @@ -2061,7 +2060,7 @@ qla1280_start_firmware(struct scsi_qla_host *ha) mb[1] = *ql1280_board_tbl[ha->devnum].fwstart; err = qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb); if (err) { - printk(KERN_ERR "scsi(%li): Failed checksum\n", ha->host_no); + printk(KERN_ERR "scsi(%li): RISC checksum failed.\n", ha->host_no); return err; } @@ -3080,10 +3079,13 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp) REQUEST_ENTRY_CNT - (ha->req_ring_index - cnt); } + dprintk(3, "Number of free entries=(%d) seg_cnt=0x%x\n", + ha->req_q_cnt, seg_cnt); + /* If room for request in request ring. */ if ((req_cnt + 2) >= ha->req_q_cnt) { status = 1; - dprintk(2, "qla1280_64bit_start_scsi: in-ptr=0x%x req_q_cnt=" + dprintk(2, "qla1280_start_scsi: in-ptr=0x%x req_q_cnt=" "0x%xreq_cnt=0x%x", ha->req_ring_index, ha->req_q_cnt, req_cnt); goto out; @@ -3095,7 +3097,7 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp) if (cnt >= MAX_OUTSTANDING_COMMANDS) { status = 1; - dprintk(2, "qla1280_64bit_start_scsi: NO ROOM IN " + dprintk(2, "qla1280_start_scsi: NO ROOM IN " "OUTSTANDING ARRAY, req_q_cnt=0x%x", ha->req_q_cnt); goto out; } @@ -3104,7 +3106,7 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp) ha->req_q_cnt -= req_cnt; CMD_HANDLE(sp->cmd) = (unsigned char *)(unsigned long)(cnt + 1); - dprintk(2, "64bit_start: cmd=%p sp=%p CDB=%xm, handle %lx\n", cmd, sp, + dprintk(2, "start: cmd=%p sp=%p CDB=%xm, handle %lx\n", cmd, sp, cmd->cmnd[0], (long)CMD_HANDLE(sp->cmd)); dprintk(2, " bus %i, target %i, lun %i\n", SCSI_BUS_32(cmd), SCSI_TCN_32(cmd), SCSI_LUN_32(cmd)); @@ -4626,7 +4628,7 @@ qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) if (pci_set_dma_mask(ha->pdev, (dma_addr_t) ~ 0ULL)) { if (pci_set_dma_mask(ha->pdev, 0xffffffff)) { printk(KERN_WARNING "scsi(%li): Unable to set a " - " suitable DMA mask - aboring\n", ha->host_no); + "suitable DMA mask - aborting\n", ha->host_no); error = -ENODEV; goto error_free_irq; } @@ -4636,14 +4638,14 @@ qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) #else if (pci_set_dma_mask(ha->pdev, 0xffffffff)) { printk(KERN_WARNING "scsi(%li): Unable to set a " - " suitable DMA mask - aboring\n", ha->host_no); + "suitable DMA mask - aborting\n", ha->host_no); error = -ENODEV; goto error_free_irq; } #endif ha->request_ring = pci_alloc_consistent(ha->pdev, - ((REQUEST_ENTRY_CNT + 1) * (sizeof(request_t))), + ((REQUEST_ENTRY_CNT + 1) * sizeof(request_t)), &ha->request_dma); if (!ha->request_ring) { printk(KERN_INFO "qla1280: Failed to get request memory\n"); @@ -4651,7 +4653,7 @@ qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) } ha->response_ring = pci_alloc_consistent(ha->pdev, - ((RESPONSE_ENTRY_CNT + 1) * (sizeof(struct response))), + ((RESPONSE_ENTRY_CNT + 1) * sizeof(struct response)), &ha->response_dma); if (!ha->response_ring) { printk(KERN_INFO "qla1280: Failed to get response memory\n"); @@ -4746,11 +4748,11 @@ qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) #endif error_free_response_ring: pci_free_consistent(ha->pdev, - ((RESPONSE_ENTRY_CNT + 1) * (sizeof(struct response))), + ((RESPONSE_ENTRY_CNT + 1) * sizeof(struct response)), ha->response_ring, ha->response_dma); error_free_request_ring: pci_free_consistent(ha->pdev, - ((REQUEST_ENTRY_CNT + 1) * (sizeof(request_t))), + ((REQUEST_ENTRY_CNT + 1) * sizeof(request_t)), ha->request_ring, ha->request_dma); error_put_host: scsi_host_put(host); |