merge by hand - fix up rejections in Documentation/DocBook/Makefile

11 files changed, 63 insertions, 35 deletions

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index ba88be399a5..88e34095ca4 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -278,7 +278,7 @@ config SCSI_3W_9XXX
 
 config SCSI_7000FASST
 	tristate "7000FASST SCSI support"
-	depends on ISA && SCSI
+	depends on ISA && SCSI && ISA_DMA_API
 	help
 	  This driver supports the Western Digital 7000 SCSI host adapter
 	  family.  Some information is in the source:
@@ -313,7 +313,7 @@ config SCSI_AHA152X
 
 config SCSI_AHA1542
 	tristate "Adaptec AHA1542 support"
-	depends on ISA && SCSI
+	depends on ISA && SCSI && ISA_DMA_API
 	---help---
 	  This is support for a SCSI host adapter.  It is explained in section
 	  3.4 of the SCSI-HOWTO, available from
@@ -533,7 +533,7 @@ config SCSI_SATA_VITESSE
 
 config SCSI_BUSLOGIC
 	tristate "BusLogic SCSI support"
-	depends on (PCI || ISA || MCA) && SCSI && (BROKEN || !SPARC64)
+	depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API
 	---help---
 	  This is support for BusLogic MultiMaster and FlashPoint SCSI Host
 	  Adapters. Consult the SCSI-HOWTO, available from
@@ -589,7 +589,7 @@ config SCSI_DTC3280
 
 config SCSI_EATA
 	tristate "EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support"
-	depends on (ISA || EISA || PCI) && SCSI && (BROKEN || !SPARC64)
+	depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API
 	---help---
 	  This driver supports all EATA/DMA-compliant SCSI host adapters.  DPT
 	  ISA and all EISA I/O addresses are probed looking for the "EATA"
@@ -683,7 +683,7 @@ config SCSI_FD_MCS
 
 config SCSI_GDTH
 	tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support"
-	depends on (ISA || EISA || PCI) && SCSI && (BROKEN || !SPARC64)
+	depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API
 	---help---
 	  Formerly called GDT SCSI Disk Array Controller Support.
 
@@ -1412,7 +1412,7 @@ config SCSI_T128
 
 config SCSI_U14_34F
 	tristate "UltraStor 14F/34F support"
-	depends on ISA && SCSI
+	depends on ISA && SCSI && ISA_DMA_API
 	---help---
 	  This is support for the UltraStor 14F and 34F SCSI-2 host adapters.
 	  The source at <file:drivers/scsi/u14-34f.c> contains some
diff --git a/drivers/scsi/NCR53C9x.c b/drivers/scsi/NCR53C9x.c
index 74293f62a62..064781a2cb1 100644
--- a/drivers/scsi/NCR53C9x.c
+++ b/drivers/scsi/NCR53C9x.c
@@ -1824,7 +1824,10 @@ static int esp_do_data(struct NCR_ESP *esp, struct ESP_regs *eregs)
 		/* loop */
 		while (hmuch) {
 			int j, fifo_stuck = 0, newphase;
-			unsigned long flags, timeout;
+			unsigned long timeout;
+#if 0
+			unsigned long flags;
+#endif
 #if 0
 			if ( i % 10 )
 				ESPDATA(("\r"));
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 7e9e6b3186a..5fd8f3ee980 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -450,7 +450,7 @@ static int aac_cfg_open(struct inode *inode, struct file *file)
 		}
 	}
 
-	return 0;
+	return err;
 }
 
 /**
diff --git a/drivers/scsi/esp.c b/drivers/scsi/esp.c
index d8ab73b6803..f6900538be9 100644
--- a/drivers/scsi/esp.c
+++ b/drivers/scsi/esp.c
@@ -49,6 +49,8 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_tcq.h>
 
+#define DRV_VERSION "1.101"
+
 #define DEBUG_ESP
 /* #define DEBUG_ESP_HME */
 /* #define DEBUG_ESP_DATA */
@@ -1145,7 +1147,7 @@ static int __init esp_detect(struct scsi_host_template *tpnt)
 	static struct sbus_dev esp_dev;
 	int esps_in_use = 0;
 
-	espchain = 0;
+	espchain = NULL;
 
 	if (sun4_esp_physaddr) {
 		memset (&esp_dev, 0, sizeof(esp_dev));
@@ -2511,7 +2513,7 @@ static inline void esp_reconnect(struct esp *esp, struct scsi_cmnd *sp)
 		ESPLOG(("esp%d: Weird, being reselected but disconnected "
 			"command queue is empty.\n", esp->esp_id));
 	esp->snip = 0;
-	esp->current_SC = 0;
+	esp->current_SC = NULL;
 	sp->SCp.phase = not_issued;
 	append_SC(&esp->issue_SC, sp);
 }
@@ -4146,7 +4148,7 @@ static int esp_work_bus(struct esp *esp)
 }
 
 static espfunc_t isvc_vector[] = {
-	0,
+	NULL,
 	esp_do_phase_determine,
 	esp_do_resetbus,
 	esp_finish_reset,
@@ -4398,5 +4400,8 @@ static struct scsi_host_template driver_template = {
 
 #include "scsi_module.c"
 
+MODULE_DESCRIPTION("EnhancedScsiProcessor Sun SCSI driver");
+MODULE_AUTHOR("David S. Miller (davem@redhat.com)");
 MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
 
diff --git a/drivers/scsi/pas16.c b/drivers/scsi/pas16.c
index e70dedb0d0a..7976947c032 100644
--- a/drivers/scsi/pas16.c
+++ b/drivers/scsi/pas16.c
@@ -137,7 +137,7 @@ static unsigned short pas16_addr = 0;
 static int pas16_irq = 0;
  
 
-int scsi_irq_translate[] =
+static const int scsi_irq_translate[] =
 	{ 0,  0,  1,  2,  3,  4,  5,  6, 0,  0,  7,  8,  9,  0, 10, 11 };
 
 /* The default_irqs array contains values used to set the irq into the
@@ -145,7 +145,7 @@ int scsi_irq_translate[] =
  * irq jumpers on the board).  The first value in the array will be
  * assigned to logical board 0, the next to board 1, etc.
  */
-int default_irqs[] __initdata = 
+static int default_irqs[] __initdata =
 	{  PAS16_DEFAULT_BOARD_1_IRQ,
 	   PAS16_DEFAULT_BOARD_2_IRQ,
 	   PAS16_DEFAULT_BOARD_3_IRQ,
@@ -177,7 +177,7 @@ static struct base {
 
 #define NO_BASES (sizeof (bases) / sizeof (struct base))
 
-unsigned short  pas16_offset[ 8 ] =
+static const unsigned short  pas16_offset[ 8 ] =
     {
 	0x1c00,    /* OUTPUT_DATA_REG */
 	0x1c01,    /* INITIATOR_COMMAND_REG */
diff --git a/drivers/scsi/pluto.c b/drivers/scsi/pluto.c
index 7bb0a2e5674..c01b7191fcf 100644
--- a/drivers/scsi/pluto.c
+++ b/drivers/scsi/pluto.c
@@ -45,7 +45,7 @@ static struct ctrl_inquiry {
 	Scsi_Cmnd cmd;
 	char inquiry[256];
 	fc_channel *fc;
-} *fcs __initdata = { 0 };
+} *fcs __initdata;
 static int fcscount __initdata = 0;
 static atomic_t fcss __initdata = ATOMIC_INIT(0);
 DECLARE_MUTEX_LOCKED(fc_sem);
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 0d730f646bc..5578ae9a9e4 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -542,7 +542,7 @@ int scsi_dispatch_cmd(struct scsi_cmnd *cmd)
 		 * that the device is no longer present */
 		cmd->result = DID_NO_CONNECT << 16;
 		atomic_inc(&cmd->device->iorequest_cnt);
-		scsi_done(cmd);
+		__scsi_done(cmd);
 		/* return 0 (because the command has been processed) */
 		goto out;
 	}
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 10355857466..cb789c35262 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -582,7 +582,7 @@ static int scsi_request_sense(struct scsi_cmnd *scmd)
 
 	memcpy(scmd->cmnd, generic_sense, sizeof(generic_sense));
 
-	scsi_result = kmalloc(252, GFP_ATOMIC | (scmd->device->host->hostt->unchecked_isa_dma) ? __GFP_DMA : 0);
+	scsi_result = kmalloc(252, GFP_ATOMIC | ((scmd->device->host->hostt->unchecked_isa_dma) ? __GFP_DMA : 0));
 
 
 	if (unlikely(!scsi_result)) {
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 287d197a7c1..cca772624ae 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -801,7 +801,7 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget,
 	if (!sreq)
 		goto out_free_sdev;
 	result = kmalloc(256, GFP_ATOMIC |
-			(shost->unchecked_isa_dma) ? __GFP_DMA : 0);
+			((shost->unchecked_isa_dma) ? __GFP_DMA : 0));
 	if (!result)
 		goto out_free_sreq;
 
diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c
index 303d7656f71..28966d05435 100644
--- a/drivers/scsi/scsi_transport_spi.c
+++ b/drivers/scsi/scsi_transport_spi.c
@@ -22,6 +22,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/workqueue.h>
+#include <linux/blkdev.h>
 #include <asm/semaphore.h>
 #include <scsi/scsi.h>
 #include "scsi_priv.h"
@@ -41,6 +42,11 @@
 
 #define SPI_MAX_ECHO_BUFFER_SIZE	4096
 
+#define DV_LOOPS	3
+#define DV_TIMEOUT	(10*HZ)
+#define DV_RETRIES	3	/* should only need at most 
+				 * two cc/ua clears */
+
 /* Private data accessors (keep these out of the header file) */
 #define spi_dv_pending(x) (((struct spi_transport_attrs *)&(x)->starget_data)->dv_pending)
 #define spi_dv_sem(x) (((struct spi_transport_attrs *)&(x)->starget_data)->dv_sem)
@@ -100,6 +106,29 @@ static int sprint_frac(char *dest, int value, int denom)
 	return result;
 }
 
+/* Modification of scsi_wait_req that will clear UNIT ATTENTION conditions
+ * resulting from (likely) bus and device resets */
+static void spi_wait_req(struct scsi_request *sreq, const void *cmd,
+			 void *buffer, unsigned bufflen)
+{
+	int i;
+
+	for(i = 0; i < DV_RETRIES; i++) {
+		sreq->sr_request->flags |= REQ_FAILFAST;
+
+		scsi_wait_req(sreq, cmd, buffer, bufflen,
+			      DV_TIMEOUT, /* retries */ 1);
+		if (sreq->sr_result & DRIVER_SENSE) {
+			struct scsi_sense_hdr sshdr;
+
+			if (scsi_request_normalize_sense(sreq, &sshdr)
+			    && sshdr.sense_key == UNIT_ATTENTION)
+				continue;
+		}
+		break;
+	}
+}
+
 static struct {
 	enum spi_signal_type	value;
 	char			*name;
@@ -378,11 +407,6 @@ static CLASS_DEVICE_ATTR(signalling, S_IRUGO | S_IWUSR,
 	if(i->f->set_##x)		\
 		i->f->set_##x(sdev->sdev_target, y)
 
-#define DV_LOOPS	3
-#define DV_TIMEOUT	(10*HZ)
-#define DV_RETRIES	3	/* should only need at most 
-				 * two cc/ua clears */
-
 enum spi_compare_returns {
 	SPI_COMPARE_SUCCESS,
 	SPI_COMPARE_FAILURE,
@@ -446,8 +470,7 @@ spi_dv_device_echo_buffer(struct scsi_request *sreq, u8 *buffer,
 	for (r = 0; r < retries; r++) {
 		sreq->sr_cmd_len = 0;	/* wait_req to fill in */
 		sreq->sr_data_direction = DMA_TO_DEVICE;
-		scsi_wait_req(sreq, spi_write_buffer, buffer, len,
-			      DV_TIMEOUT, DV_RETRIES);
+		spi_wait_req(sreq, spi_write_buffer, buffer, len);
 		if(sreq->sr_result || !scsi_device_online(sdev)) {
 			struct scsi_sense_hdr sshdr;
 
@@ -471,8 +494,7 @@ spi_dv_device_echo_buffer(struct scsi_request *sreq, u8 *buffer,
 		memset(ptr, 0, len);
 		sreq->sr_cmd_len = 0;	/* wait_req to fill in */
 		sreq->sr_data_direction = DMA_FROM_DEVICE;
-		scsi_wait_req(sreq, spi_read_buffer, ptr, len,
-			      DV_TIMEOUT, DV_RETRIES);
+		spi_wait_req(sreq, spi_read_buffer, ptr, len);
 		scsi_device_set_state(sdev, SDEV_QUIESCE);
 
 		if (memcmp(buffer, ptr, len) != 0)
@@ -500,8 +522,7 @@ spi_dv_device_compare_inquiry(struct scsi_request *sreq, u8 *buffer,
 
 		memset(ptr, 0, len);
 
-		scsi_wait_req(sreq, spi_inquiry, ptr, len,
-			      DV_TIMEOUT, DV_RETRIES);
+		spi_wait_req(sreq, spi_inquiry, ptr, len);
 		
 		if(sreq->sr_result || !scsi_device_online(sdev)) {
 			scsi_device_set_state(sdev, SDEV_QUIESCE);
@@ -593,8 +614,7 @@ spi_dv_device_get_echo_buffer(struct scsi_request *sreq, u8 *buffer)
 	 * (reservation conflict, device not ready, etc) just
 	 * skip the write tests */
 	for (l = 0; ; l++) {
-		scsi_wait_req(sreq, spi_test_unit_ready, NULL, 0,
-			      DV_TIMEOUT, DV_RETRIES);
+		spi_wait_req(sreq, spi_test_unit_ready, NULL, 0);
 
 		if(sreq->sr_result) {
 			if(l >= 3)
@@ -608,8 +628,7 @@ spi_dv_device_get_echo_buffer(struct scsi_request *sreq, u8 *buffer)
 	sreq->sr_cmd_len = 0;
 	sreq->sr_data_direction = DMA_FROM_DEVICE;
 
-	scsi_wait_req(sreq, spi_read_buffer_descriptor, buffer, 4,
-		      DV_TIMEOUT, DV_RETRIES);
+	spi_wait_req(sreq, spi_read_buffer_descriptor, buffer, 4);
 
 	if (sreq->sr_result)
 		/* Device has no echo buffer */
diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index 5ff83d214f1..5b07c6ec3ec 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -2038,8 +2038,9 @@ static void sym2_set_period(struct scsi_target *starget, int period)
 	struct sym_hcb *np = sym_get_hcb(shost);
 	struct sym_tcb *tp = &np->target[starget->id];
 
-	/* have to have DT for these transfers */
-	if (period <= np->minsync)
+	/* have to have DT for these transfers, but DT will also
+	 * set width, so check that this is allowed */
+	if (period <= np->minsync && spi_width(starget))
 		tp->tgoal.dt = 1;
 
 	tp->tgoal.period = period;