tty: move drivers/serial/ to drivers/tty/serial/

The serial drivers are really just tty drivers, so move them to
drivers/tty/ to make things a bit neater overall.

This is part of the tty/serial driver movement proceedure as proposed by
Arnd Bergmann and approved by everyone involved a number of months ago.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rogier Wolff <R.E.Wolff@bitwizard.nl>
Cc: Michael H. Warfield <mhw@wittsend.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 0 insertions, 1472 deletions

diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c
deleted file mode 100644
index be0ebce36e5..00000000000
--- a/drivers/serial/68328serial.c
+++ /dev/null
@@ -1,1472 +0,0 @@
-/* 68328serial.c: Serial port driver for 68328 microcontroller
- *
- * Copyright (C) 1995       David S. Miller    <davem@caip.rutgers.edu>
- * Copyright (C) 1998       Kenneth Albanowski <kjahds@kjahds.com>
- * Copyright (C) 1998, 1999 D. Jeff Dionne     <jeff@uclinux.org>
- * Copyright (C) 1999       Vladimir Gurevich  <vgurevic@cisco.com>
- * Copyright (C) 2002-2003  David McCullough   <davidm@snapgear.com>
- * Copyright (C) 2002       Greg Ungerer       <gerg@snapgear.com>
- *
- * VZ Support/Fixes             Evan Stawnyczy <e@lineo.ca>
- * Multiple UART support        Daniel Potts <danielp@cse.unsw.edu.au>
- * Power management support     Daniel Potts <danielp@cse.unsw.edu.au>
- * VZ Second Serial Port enable Phil Wilshire
- * 2.4/2.5 port                 David McCullough
- */
-
-#include <asm/dbg.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/fcntl.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/console.h>
-#include <linux/reboot.h>
-#include <linux/keyboard.h>
-#include <linux/init.h>
-#include <linux/pm.h>
-#include <linux/bitops.h>
-#include <linux/delay.h>
-#include <linux/gfp.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/delay.h>
-#include <asm/uaccess.h>
-
-/* (es) */
-/* note: perhaps we can murge these files, so that you can just
- * 	 define 1 of them, and they can sort that out for themselves
- */
-#if defined(CONFIG_M68EZ328)
-#include <asm/MC68EZ328.h>
-#else
-#if defined(CONFIG_M68VZ328)
-#include <asm/MC68VZ328.h>
-#else
-#include <asm/MC68328.h>
-#endif /* CONFIG_M68VZ328 */
-#endif /* CONFIG_M68EZ328 */
-
-#include "68328serial.h"
-
-/* Turn off usage of real serial interrupt code, to "support" Copilot */
-#ifdef CONFIG_XCOPILOT_BUGS
-#undef USE_INTS
-#else
-#define USE_INTS
-#endif
-
-static struct m68k_serial m68k_soft[NR_PORTS];
-
-static unsigned int uart_irqs[NR_PORTS] = UART_IRQ_DEFNS;
-
-/* multiple ports are contiguous in memory */
-m68328_uart *uart_addr = (m68328_uart *)USTCNT_ADDR;
-
-struct tty_struct m68k_ttys;
-struct m68k_serial *m68k_consinfo = 0;
-
-#define M68K_CLOCK (16667000) /* FIXME: 16MHz is likely wrong */
-
-struct tty_driver *serial_driver;
-
-/* number of characters left in xmit buffer before we ask for more */
-#define WAKEUP_CHARS 256
-
-/* Debugging... DEBUG_INTR is bad to use when one of the zs
- * lines is your console ;(
- */
-#undef SERIAL_DEBUG_INTR
-#undef SERIAL_DEBUG_OPEN
-#undef SERIAL_DEBUG_FLOW
-
-#define RS_ISR_PASS_LIMIT 256
-
-static void change_speed(struct m68k_serial *info);
-
-/*
- *	Setup for console. Argument comes from the boot command line.
- */
-
-/* note: this is messy, but it works, again, perhaps defined somewhere else?*/
-#ifdef CONFIG_M68VZ328
-#define CONSOLE_BAUD_RATE	19200
-#define DEFAULT_CBAUD		B19200
-#endif
-
-
-#ifndef CONSOLE_BAUD_RATE
-#define	CONSOLE_BAUD_RATE	9600
-#define	DEFAULT_CBAUD		B9600
-#endif
-
-
-static int m68328_console_initted = 0;
-static int m68328_console_baud    = CONSOLE_BAUD_RATE;
-static int m68328_console_cbaud   = DEFAULT_CBAUD;
-
-
-static inline int serial_paranoia_check(struct m68k_serial *info,
-					char *name, const char *routine)
-{
-#ifdef SERIAL_PARANOIA_CHECK
-	static const char *badmagic =
-		"Warning: bad magic number for serial struct %s in %s\n";
-	static const char *badinfo =
-		"Warning: null m68k_serial for %s in %s\n";
-
-	if (!info) {
-		printk(badinfo, name, routine);
-		return 1;
-	}
-	if (info->magic != SERIAL_MAGIC) {
-		printk(badmagic, name, routine);
-		return 1;
-	}
-#endif
-	return 0;
-}
-
-/*
- * This is used to figure out the divisor speeds and the timeouts
- */
-static int baud_table[] = {
-	0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
-	9600, 19200, 38400, 57600, 115200, 0 };
-
-/* Sets or clears DTR/RTS on the requested line */
-static inline void m68k_rtsdtr(struct m68k_serial *ss, int set)
-{
-	if (set) {
-		/* set the RTS/CTS line */
-	} else {
-		/* clear it */
-	}
-	return;
-}
-
-/* Utility routines */
-static inline int get_baud(struct m68k_serial *ss)
-{
-	unsigned long result = 115200;
-	unsigned short int baud = uart_addr[ss->line].ubaud;
-	if (GET_FIELD(baud, UBAUD_PRESCALER) == 0x38) result = 38400;
-	result >>= GET_FIELD(baud, UBAUD_DIVIDE);
-
-	return result;
-}
-
-/*
- * ------------------------------------------------------------
- * rs_stop() and rs_start()
- *
- * This routines are called before setting or resetting tty->stopped.
- * They enable or disable transmitter interrupts, as necessary.
- * ------------------------------------------------------------
- */
-static void rs_stop(struct tty_struct *tty)
-{
-	struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
-	m68328_uart *uart = &uart_addr[info->line];
-	unsigned long flags;
-
-	if (serial_paranoia_check(info, tty->name, "rs_stop"))
-		return;
-	
-	local_irq_save(flags);
-	uart->ustcnt &= ~USTCNT_TXEN;
-	local_irq_restore(flags);
-}
-
-static int rs_put_char(char ch)
-{
-        int flags, loops = 0;
-
-        local_irq_save(flags);
-
-	while (!(UTX & UTX_TX_AVAIL) && (loops < 1000)) {
-        	loops++;
-        	udelay(5);
-        }
-
-	UTX_TXDATA = ch;
-        udelay(5);
-        local_irq_restore(flags);
-        return 1;
-}
-
-static void rs_start(struct tty_struct *tty)
-{
-	struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
-	m68328_uart *uart = &uart_addr[info->line];
-	unsigned long flags;
-	
-	if (serial_paranoia_check(info, tty->name, "rs_start"))
-		return;
-	
-	local_irq_save(flags);
-	if (info->xmit_cnt && info->xmit_buf && !(uart->ustcnt & USTCNT_TXEN)) {
-#ifdef USE_INTS
-		uart->ustcnt |= USTCNT_TXEN | USTCNT_TX_INTR_MASK;
-#else
-		uart->ustcnt |= USTCNT_TXEN;
-#endif
-	}
-	local_irq_restore(flags);
-}
-
-/* Drop into either the boot monitor or kadb upon receiving a break
- * from keyboard/console input.
- */
-static void batten_down_hatches(void)
-{
-	/* Drop into the debugger */
-}
-
-static void status_handle(struct m68k_serial *info, unsigned short status)
-{
-#if 0
-	if(status & DCD) {
-		if((info->port.tty->termios->c_cflag & CRTSCTS) &&
-		   ((info->curregs[3] & AUTO_ENAB)==0)) {
-			info->curregs[3] |= AUTO_ENAB;
-			info->pendregs[3] |= AUTO_ENAB;
-			write_zsreg(info->m68k_channel, 3, info->curregs[3]);
-		}
-	} else {
-		if((info->curregs[3] & AUTO_ENAB)) {
-			info->curregs[3] &= ~AUTO_ENAB;
-			info->pendregs[3] &= ~AUTO_ENAB;
-			write_zsreg(info->m68k_channel, 3, info->curregs[3]);
-		}
-	}
-#endif
-	/* If this is console input and this is a
-	 * 'break asserted' status change interrupt
-	 * see if we can drop into the debugger
-	 */
-	if((status & URX_BREAK) && info->break_abort)
-		batten_down_hatches();
-	return;
-}
-
-static void receive_chars(struct m68k_serial *info, unsigned short rx)
-{
-	struct tty_struct *tty = info->port.tty;
-	m68328_uart *uart = &uart_addr[info->line];
-	unsigned char ch, flag;
-
-	/*
-	 * This do { } while() loop will get ALL chars out of Rx FIFO 
-         */
-#ifndef CONFIG_XCOPILOT_BUGS
-	do {
-#endif	
-		ch = GET_FIELD(rx, URX_RXDATA);
-	
-		if(info->is_cons) {
-			if(URX_BREAK & rx) { /* whee, break received */
-				status_handle(info, rx);
-				return;
-#ifdef CONFIG_MAGIC_SYSRQ
-			} else if (ch == 0x10) { /* ^P */
-				show_state();
-				show_free_areas();
-				show_buffers();
-/*				show_net_buffers(); */
-				return;
-			} else if (ch == 0x12) { /* ^R */
-				emergency_restart();
-				return;
-#endif /* CONFIG_MAGIC_SYSRQ */
-			}
-		}
-
-		if(!tty)
-			goto clear_and_exit;
-		
-		flag = TTY_NORMAL;
-
-		if(rx & URX_PARITY_ERROR) {
-			flag = TTY_PARITY;
-			status_handle(info, rx);
-		} else if(rx & URX_OVRUN) {
-			flag = TTY_OVERRUN;
-			status_handle(info, rx);
-		} else if(rx & URX_FRAME_ERROR) {
-			flag = TTY_FRAME;
-			status_handle(info, rx);
-		}
-		tty_insert_flip_char(tty, ch, flag);
-#ifndef CONFIG_XCOPILOT_BUGS
-	} while((rx = uart->urx.w) & URX_DATA_READY);
-#endif
-
-	tty_schedule_flip(tty);
-
-clear_and_exit:
-	return;
-}
-
-static void transmit_chars(struct m68k_serial *info)
-{
-	m68328_uart *uart = &uart_addr[info->line];
-
-	if (info->x_char) {
-		/* Send next char */
-		uart->utx.b.txdata = info->x_char;
-		info->x_char = 0;
-		goto clear_and_return;
-	}
-
-	if((info->xmit_cnt <= 0) || info->port.tty->stopped) {
-		/* That's peculiar... TX ints off */
-		uart->ustcnt &= ~USTCNT_TX_INTR_MASK;
-		goto clear_and_return;
-	}
-
-	/* Send char */
-	uart->utx.b.txdata = info->xmit_buf[info->xmit_tail++];
-	info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
-	info->xmit_cnt--;
-
-	if (info->xmit_cnt < WAKEUP_CHARS)
-		schedule_work(&info->tqueue);
-
-	if(info->xmit_cnt <= 0) {
-		/* All done for now... TX ints off */
-		uart->ustcnt &= ~USTCNT_TX_INTR_MASK;
-		goto clear_and_return;
-	}
-
-clear_and_return:
-	/* Clear interrupt (should be auto)*/
-	return;
-}
-
-/*
- * This is the serial driver's generic interrupt routine
- */
-irqreturn_t rs_interrupt(int irq, void *dev_id)
-{
-	struct m68k_serial *info = dev_id;
-	m68328_uart *uart;
-	unsigned short rx;
-	unsigned short tx;
-
-	uart = &uart_addr[info->line];
-	rx = uart->urx.w;
-
-#ifdef USE_INTS
-	tx = uart->utx.w;
-
-	if (rx & URX_DATA_READY) receive_chars(info, rx);
-	if (tx & UTX_TX_AVAIL)   transmit_chars(info);
-#else
-	receive_chars(info, rx);		
-#endif
-	return IRQ_HANDLED;
-}
-
-static void do_softint(struct work_struct *work)
-{
-	struct m68k_serial	*info = container_of(work, struct m68k_serial, tqueue);
-	struct tty_struct	*tty;
-	
-	tty = info->port.tty;
-	if (!tty)
-		return;
-#if 0
-	if (clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) {
-		tty_wakeup(tty);
-	}
-#endif   
-}
-
-/*
- * This routine is called from the scheduler tqueue when the interrupt
- * routine has signalled that a hangup has occurred.  The path of
- * hangup processing is:
- *
- * 	serial interrupt routine -> (scheduler tqueue) ->
- * 	do_serial_hangup() -> tty->hangup() -> rs_hangup()
- * 
- */
-static void do_serial_hangup(struct work_struct *work)
-{
-	struct m68k_serial	*info = container_of(work, struct m68k_serial, tqueue_hangup);
-	struct tty_struct	*tty;
-	
-	tty = info->port.tty;
-	if (!tty)
-		return;
-
-	tty_hangup(tty);
-}
-
-
-static int startup(struct m68k_serial * info)
-{
-	m68328_uart *uart = &uart_addr[info->line];
-	unsigned long flags;
-	
-	if (info->flags & S_INITIALIZED)
-		return 0;
-
-	if (!info->xmit_buf) {
-		info->xmit_buf = (unsigned char *) __get_free_page(GFP_KERNEL);
-		if (!info->xmit_buf)
-			return -ENOMEM;
-	}
-
-	local_irq_save(flags);
-
-	/*
-	 * Clear the FIFO buffers and disable them
-	 * (they will be reenabled in change_speed())
-	 */
-
-	uart->ustcnt = USTCNT_UEN;
-	info->xmit_fifo_size = 1;
-	uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_TXEN;
-	(void)uart->urx.w;
-
-	/*
-	 * Finally, enable sequencing and interrupts
-	 */
-#ifdef USE_INTS
-	uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | 
-                 USTCNT_RX_INTR_MASK | USTCNT_TX_INTR_MASK;
-#else
-	uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_RX_INTR_MASK;
-#endif
-
-	if (info->port.tty)
-		clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
-	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
-
-	/*
-	 * and set the speed of the serial port
-	 */
-
-	change_speed(info);
-
-	info->flags |= S_INITIALIZED;
-	local_irq_restore(flags);
-	return 0;
-}
-
-/*
- * This routine will shutdown a serial port; interrupts are disabled, and
- * DTR is dropped if the hangup on close termio flag is on.
- */
-static void shutdown(struct m68k_serial * info)
-{
-	m68328_uart *uart = &uart_addr[info->line];
-	unsigned long	flags;
-
-	uart->ustcnt = 0; /* All off! */
-	if (!(info->flags & S_INITIALIZED))
-		return;
-
-	local_irq_save(flags);
-	
-	if (info->xmit_buf) {
-		free_page((unsigned long) info->xmit_buf);
-		info->xmit_buf = 0;
-	}
-
-	if (info->port.tty)
-		set_bit(TTY_IO_ERROR, &info->port.tty->flags);
-	
-	info->flags &= ~S_INITIALIZED;
-	local_irq_restore(flags);
-}
-
-struct {
-	int divisor, prescale;
-}
-#ifndef CONFIG_M68VZ328
- hw_baud_table[18] = {
-	{0,0}, /* 0 */
-	{0,0}, /* 50 */
-	{0,0}, /* 75 */
-	{0,0}, /* 110 */
-	{0,0}, /* 134 */
-	{0,0}, /* 150 */
-	{0,0}, /* 200 */
-	{7,0x26}, /* 300 */
-	{6,0x26}, /* 600 */
-	{5,0x26}, /* 1200 */
-	{0,0}, /* 1800 */
-	{4,0x26}, /* 2400 */
-	{3,0x26}, /* 4800 */
-	{2,0x26}, /* 9600 */
-	{1,0x26}, /* 19200 */
-	{0,0x26}, /* 38400 */
-	{1,0x38}, /* 57600 */
-	{0,0x38}, /* 115200 */
-};
-#else
- hw_baud_table[18] = {
-                 {0,0}, /* 0 */
-                 {0,0}, /* 50 */
-                 {0,0}, /* 75 */
-                 {0,0}, /* 110 */
-                 {0,0}, /* 134 */
-                 {0,0}, /* 150 */
-                 {0,0}, /* 200 */
-                 {0,0}, /* 300 */
-                 {7,0x26}, /* 600 */
-                 {6,0x26}, /* 1200 */
-                 {0,0}, /* 1800 */
-                 {5,0x26}, /* 2400 */
-                 {4,0x26}, /* 4800 */
-                 {3,0x26}, /* 9600 */
-                 {2,0x26}, /* 19200 */
-                 {1,0x26}, /* 38400 */
-                 {0,0x26}, /* 57600 */
-                 {1,0x38}, /* 115200 */
-}; 
-#endif
-/* rate = 1036800 / ((65 - prescale) * (1<<divider)) */
-
-/*
- * This routine is called to set the UART divisor registers to match
- * the specified baud rate for a serial port.
- */
-static void change_speed(struct m68k_serial *info)
-{
-	m68328_uart *uart = &uart_addr[info->line];
-	unsigned short port;
-	unsigned short ustcnt;
-	unsigned cflag;
-	int	i;
-
-	if (!info->port.tty || !info->port.tty->termios)
-		return;
-	cflag = info->port.tty->termios->c_cflag;
-	if (!(port = info->port))
-		return;
-
-	ustcnt = uart->ustcnt;
-	uart->ustcnt = ustcnt & ~USTCNT_TXEN;
-
-	i = cflag & CBAUD;
-        if (i & CBAUDEX) {
-                i = (i & ~CBAUDEX) + B38400;
-        }
-
-	info->baud = baud_table[i];
-	uart->ubaud = PUT_FIELD(UBAUD_DIVIDE,    hw_baud_table[i].divisor) | 
-		PUT_FIELD(UBAUD_PRESCALER, hw_baud_table[i].prescale);
-
-	ustcnt &= ~(USTCNT_PARITYEN | USTCNT_ODD_EVEN | USTCNT_STOP | USTCNT_8_7);
-	
-	if ((cflag & CSIZE) == CS8)
-		ustcnt |= USTCNT_8_7;
-		
-	if (cflag & CSTOPB)
-		ustcnt |= USTCNT_STOP;
-
-	if (cflag & PARENB)
-		ustcnt |= USTCNT_PARITYEN;
-	if (cflag & PARODD)
-		ustcnt |= USTCNT_ODD_EVEN;
-	
-#ifdef CONFIG_SERIAL_68328_RTS_CTS
-	if (cflag & CRTSCTS) {
-		uart->utx.w &= ~ UTX_NOCTS;
-	} else {
-		uart->utx.w |= UTX_NOCTS;
-	}
-#endif
-
-	ustcnt |= USTCNT_TXEN;
-	
-	uart->ustcnt = ustcnt;
-	return;
-}
-
-/*
- * Fair output driver allows a process to speak.
- */
-static void rs_fair_output(void)
-{
-	int left;		/* Output no more than that */
-	unsigned long flags;
-	struct m68k_serial *info = &m68k_soft[0];
-	char c;
-
-	if (info == 0) return;
-	if (info->xmit_buf == 0) return;
-
-	local_irq_save(flags);
-	left = info->xmit_cnt;
-	while (left != 0) {
-		c = info->xmit_buf[info->xmit_tail];
-		info->xmit_tail = (info->xmit_tail+1) & (SERIAL_XMIT_SIZE-1);
-		info->xmit_cnt--;
-		local_irq_restore(flags);
-
-		rs_put_char(c);
-
-		local_irq_save(flags);
-		left = min(info->xmit_cnt, left-1);
-	}
-
-	/* Last character is being transmitted now (hopefully). */
-	udelay(5);
-
-	local_irq_restore(flags);
-	return;
-}
-
-/*
- * m68k_console_print is registered for printk.
- */
-void console_print_68328(const char *p)
-{
-	char c;
-	
-	while((c=*(p++)) != 0) {
-		if(c == '\n')
-			rs_put_char('\r');
-		rs_put_char(c);
-	}
-
-	/* Comment this if you want to have a strict interrupt-driven output */
-	rs_fair_output();
-
-	return;
-}
-
-static void rs_set_ldisc(struct tty_struct *tty)
-{
-	struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
-
-	if (serial_paranoia_check(info, tty->name, "rs_set_ldisc"))
-		return;
-
-	info->is_cons = (tty->termios->c_line == N_TTY);
-	
-	printk("ttyS%d console mode %s\n", info->line, info->is_cons ? "on" : "off");
-}
-
-static void rs_flush_chars(struct tty_struct *tty)
-{
-	struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
-	m68328_uart *uart = &uart_addr[info->line];
-	unsigned long flags;
-
-	if (serial_paranoia_check(info, tty->name, "rs_flush_chars"))
-		return;
-#ifndef USE_INTS
-	for(;;) {
-#endif
-
-	/* Enable transmitter */
-	local_irq_save(flags);
-
-	if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
-			!info->xmit_buf) {
-		local_irq_restore(flags);
-		return;
-	}
-
-#ifdef USE_INTS
-	uart->ustcnt |= USTCNT_TXEN | USTCNT_TX_INTR_MASK;
-#else
-	uart->ustcnt |= USTCNT_TXEN;
-#endif
-
-#ifdef USE_INTS
-	if (uart->utx.w & UTX_TX_AVAIL) {
-#else
-	if (1) {
-#endif
-		/* Send char */
-		uart->utx.b.txdata = info->xmit_buf[info->xmit_tail++];
-		info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
-		info->xmit_cnt--;
-	}
-
-#ifndef USE_INTS
-	while (!(uart->utx.w & UTX_TX_AVAIL)) udelay(5);
-	}
-#endif
-	local_irq_restore(flags);
-}
-
-extern void console_printn(const char * b, int count);
-
-static int rs_write(struct tty_struct * tty,
-		    const unsigned char *buf, int count)
-{
-	int	c, total = 0;
-	struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
-	m68328_uart *uart = &uart_addr[info->line];
-	unsigned long flags;
-
-	if (serial_paranoia_check(info, tty->name, "rs_write"))
-		return 0;
-
-	if (!tty || !info->xmit_buf)
-		return 0;
-
-	local_save_flags(flags);
-	while (1) {
-		local_irq_disable();		
-		c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
-				   SERIAL_XMIT_SIZE - info->xmit_head));
-		local_irq_restore(flags);
-
-		if (c <= 0)
-			break;
-
-		memcpy(info->xmit_buf + info->xmit_head, buf, c);
-
-		local_irq_disable();
-		info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
-		info->xmit_cnt += c;
-		local_irq_restore(flags);
-		buf += c;
-		count -= c;
-		total += c;
-	}
-
-	if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) {
-		/* Enable transmitter */
-		local_irq_disable();		
-#ifndef USE_INTS
-		while(info->xmit_cnt) {
-#endif
-
-		uart->ustcnt |= USTCNT_TXEN;
-#ifdef USE_INTS
-		uart->ustcnt |= USTCNT_TX_INTR_MASK;
-#else
-		while (!(uart->utx.w & UTX_TX_AVAIL)) udelay(5);
-#endif
-		if (uart->utx.w & UTX_TX_AVAIL) {
-			uart->utx.b.txdata = info->xmit_buf[info->xmit_tail++];
-			info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
-			info->xmit_cnt--;
-		}
-
-#ifndef USE_INTS
-		}
-#endif
-		local_irq_restore(flags);
-	}
-
-	return total;
-}
-
-static int rs_write_room(struct tty_struct *tty)
-{
-	struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
-	int	ret;
-				
-	if (serial_paranoia_check(info, tty->name, "rs_write_room"))
-		return 0;
-	ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
-	if (ret < 0)
-		ret = 0;
-	return ret;
-}
-
-static int rs_chars_in_buffer(struct tty_struct *tty)
-{
-	struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
-				
-	if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer"))
-		return 0;
-	return info->xmit_cnt;
-}
-
-static void rs_flush_buffer(struct tty_struct *tty)
-{
-	struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
-	unsigned long flags;
-				
-	if (serial_paranoia_check(info, tty->name, "rs_flush_buffer"))
-		return;
-	local_irq_save(flags);
-	info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
-	local_irq_restore(flags);
-	tty_wakeup(tty);
-}
-
-/*
- * ------------------------------------------------------------
- * rs_throttle()
- * 
- * This routine is called by the upper-layer tty layer to signal that
- * incoming characters should be throttled.
- * ------------------------------------------------------------
- */
-static void rs_throttle(struct tty_struct * tty)
-{
-	struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
-
-	if (serial_paranoia_check(info, tty->name, "rs_throttle"))
-		return;
-	
-	if (I_IXOFF(tty))
-		info->x_char = STOP_CHAR(tty);
-
-	/* Turn off RTS line (do this atomic) */
-}
-
-static void rs_unthrottle(struct tty_struct * tty)
-{
-	struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
-
-	if (serial_paranoia_check(info, tty->name, "rs_unthrottle"))
-		return;
-	
-	if (I_IXOFF(tty)) {
-		if (info->x_char)
-			info->x_char = 0;
-		else
-			info->x_char = START_CHAR(tty);
-	}
-
-	/* Assert RTS line (do this atomic) */
-}
-
-/*
- * ------------------------------------------------------------
- * rs_ioctl() and friends
- * ------------------------------------------------------------
- */
-
-static int get_serial_info(struct m68k_serial * info,
-			   struct serial_struct * retinfo)
-{
-	struct serial_struct tmp;
-  
-	if (!retinfo)
-		return -EFAULT;
-	memset(&tmp, 0, sizeof(tmp));
-	tmp.type = info->type;
-	tmp.line = info->line;
-	tmp.port = info->port;
-	tmp.irq = info->irq;
-	tmp.flags = info->flags;
-	tmp.baud_base = info->baud_base;
-	tmp.close_delay = info->close_delay;
-	tmp.closing_wait = info->closing_wait;
-	tmp.custom_divisor = info->custom_divisor;
-	if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
-		return -EFAULT;
-
-	return 0;
-}
-
-static int set_serial_info(struct m68k_serial * info,
-			   struct serial_struct * new_info)
-{
-	struct serial_struct new_serial;
-	struct m68k_serial old_info;
-	int 			retval = 0;
-
-	if (!new_info)
-		return -EFAULT;
-	if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
-		return -EFAULT;
-	old_info = *info;
-
-	if (!capable(CAP_SYS_ADMIN)) {
-		if ((new_serial.baud_base != info->baud_base) ||
-		    (new_serial.type != info->type) ||
-		    (new_serial.close_delay != info->close_delay) ||
-		    ((new_serial.flags & ~S_USR_MASK) !=
-		     (info->flags & ~S_USR_MASK)))
-			return -EPERM;
-		info->flags = ((info->flags & ~S_USR_MASK) |
-			       (new_serial.flags & S_USR_MASK));
-		info->custom_divisor = new_serial.custom_divisor;
-		goto check_and_exit;
-	}
-
-	if (info->count > 1)
-		return -EBUSY;
-
-	/*
-	 * OK, past this point, all the error checking has been done.
-	 * At this point, we start making changes.....
-	 */
-
-	info->baud_base = new_serial.baud_base;
-	info->flags = ((info->flags & ~S_FLAGS) |
-			(new_serial.flags & S_FLAGS));
-	info->type = new_serial.type;
-	info->close_delay = new_serial.close_delay;
-	info->closing_wait = new_serial.closing_wait;
-
-check_and_exit:
-	retval = startup(info);
-	return retval;
-}
-
-/*
- * get_lsr_info - get line status register info
- *
- * Purpose: Let user call ioctl() to get info when the UART physically
- * 	    is emptied.  On bus types like RS485, the transmitter must
- * 	    release the bus after transmitting. This must be done when
- * 	    the transmit shift register is empty, not be done when the
- * 	    transmit holding register is empty.  This functionality
- * 	    allows an RS485 driver to be written in user space. 
- */
-static int get_lsr_info(struct m68k_serial * info, unsigned int *value)
-{
-#ifdef CONFIG_SERIAL_68328_RTS_CTS
-	m68328_uart *uart = &uart_addr[info->line];
-#endif
-	unsigned char status;
-	unsigned long flags;
-
-	local_irq_save(flags);
-#ifdef CONFIG_SERIAL_68328_RTS_CTS
-	status = (uart->utx.w & UTX_CTS_STAT) ? 1 : 0;
-#else
-	status = 0;
-#endif
-	local_irq_restore(flags);
-	return put_user(status, value);
-}
-
-/*
- * This routine sends a break character out the serial port.
- */
-static void send_break(struct m68k_serial * info, unsigned int duration)
-{
-	m68328_uart *uart = &uart_addr[info->line];
-        unsigned long flags;
-        if (!info->port)
-                return;
-        local_irq_save(flags);
-#ifdef USE_INTS	
-	uart->utx.w |= UTX_SEND_BREAK;
-	msleep_interruptible(duration);
-	uart->utx.w &= ~UTX_SEND_BREAK;
-#endif		
-        local_irq_restore(flags);
-}
-
-static int rs_ioctl(struct tty_struct *tty, struct file * file,
-		    unsigned int cmd, unsigned long arg)
-{
-	int error;
-	struct m68k_serial * info = (struct m68k_serial *)tty->driver_data;
-	int retval;
-
-	if (serial_paranoia_check(info, tty->name, "rs_ioctl"))
-		return -ENODEV;
-
-	if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
-	    (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD)  &&
-	    (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) {
-		if (tty->flags & (1 << TTY_IO_ERROR))
-		    return -EIO;
-	}
-	
-	switch (cmd) {
-		case TCSBRK:	/* SVID version: non-zero arg --> no break */
-			retval = tty_check_change(tty);
-			if (retval)
-				return retval;
-			tty_wait_until_sent(tty, 0);
-			if (!arg)
-				send_break(info, 250);	/* 1/4 second */
-			return 0;
-		case TCSBRKP:	/* support for POSIX tcsendbreak() */
-			retval = tty_check_change(tty);
-			if (retval)
-				return retval;
-			tty_wait_until_sent(tty, 0);
-			send_break(info, arg ? arg*(100) : 250);
-			return 0;
-		case TIOCGSERIAL:
-			return get_serial_info(info,
-				       (struct serial_struct *) arg);
-		case TIOCSSERIAL:
-			return set_serial_info(info,
-					       (struct serial_struct *) arg);
-		case TIOCSERGETLSR: /* Get line status register */
-			return get_lsr_info(info, (unsigned int *) arg);
-		case TIOCSERGSTRUCT:
-			if (copy_to_user((struct m68k_serial *) arg,
-				    info, sizeof(struct m68k_serial)))
-				return -EFAULT;
-			return 0;
-		default:
-			return -ENOIOCTLCMD;
-		}
-	return 0;
-}
-
-static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
-{
-	struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
-
-	change_speed(info);
-
-	if ((old_termios->c_cflag & CRTSCTS) &&
-	    !(tty->termios->c_cflag & CRTSCTS)) {
-		tty->hw_stopped = 0;
-		rs_start(tty);
-	}
-	
-}
-
-/*
- * ------------------------------------------------------------
- * rs_close()
- * 
- * This routine is called when the serial port gets closed.  First, we
- * wait for the last remaining data to be sent.  Then, we unlink its
- * S structure from the interrupt chain if necessary, and we free
- * that IRQ if nothing is left in the chain.
- * ------------------------------------------------------------
- */
-static void rs_close(struct tty_struct *tty, struct file * filp)
-{
-	struct m68k_serial * info = (struct m68k_serial *)tty->driver_data;
-	m68328_uart *uart = &uart_addr[info->line];
-	unsigned long flags;
-
-	if (!info || serial_paranoia_check(info, tty->name, "rs_close"))
-		return;
-	
-	local_irq_save(flags);
-	
-	if (tty_hung_up_p(filp)) {
-		local_irq_restore(flags);
-		return;
-	}
-	
-	if ((tty->count == 1) && (info->count != 1)) {
-		/*
-		 * Uh, oh.  tty->count is 1, which means that the tty
-		 * structure will be freed.  Info->count should always
-		 * be one in these conditions.  If it's greater than
-		 * one, we've got real problems, since it means the
-		 * serial port won't be shutdown.
-		 */
-		printk("rs_close: bad serial port count; tty->count is 1, "
-		       "info->count is %d\n", info->count);
-		info->count = 1;
-	}
-	if (--info->count < 0) {
-		printk("rs_close: bad serial port count for ttyS%d: %d\n",
-		       info->line, info->count);
-		info->count = 0;
-	}
-	if (info->count) {
-		local_irq_restore(flags);
-		return;
-	}
-	info->flags |= S_CLOSING;
-	/*
-	 * Now we wait for the transmit buffer to clear; and we notify 
-	 * the line discipline to only process XON/XOFF characters.
-	 */
-	tty->closing = 1;
-	if (info->closing_wait != S_CLOSING_WAIT_NONE)
-		tty_wait_until_sent(tty, info->closing_wait);
-	/*
-	 * At this point we stop accepting input.  To do this, we
-	 * disable the receive line status interrupts, and tell the
-	 * interrupt driver to stop checking the data ready bit in the
-	 * line status register.
-	 */
-
-	uart->ustcnt &= ~USTCNT_RXEN;
-	uart->ustcnt &= ~(USTCNT_RXEN | USTCNT_RX_INTR_MASK);
-
-	shutdown(info);
-	rs_flush_buffer(tty);
-		
-	tty_ldisc_flush(tty);
-	tty->closing = 0;
-	info->event = 0;
-	info->port.tty = NULL;
-#warning "This is not and has never been valid so fix it"	
-#if 0
-	if (tty->ldisc.num != ldiscs[N_TTY].num) {
-		if (tty->ldisc.close)
-			(tty->ldisc.close)(tty);
-		tty->ldisc = ldiscs[N_TTY];
-		tty->termios->c_line = N_TTY;
-		if (tty->ldisc.open)
-			(tty->ldisc.open)(tty);
-	}
-#endif	
-	if (info->blocked_open) {
-		if (info->close_delay) {
-			msleep_interruptible(jiffies_to_msecs(info->close_delay));
-		}
-		wake_up_interruptible(&info->open_wait);
-	}
-	info->flags &= ~(S_NORMAL_ACTIVE|S_CLOSING);
-	wake_up_interruptible(&info->close_wait);
-	local_irq_restore(flags);
-}
-
-/*
- * rs_hangup() --- called by tty_hangup() when a hangup is signaled.
- */
-void rs_hangup(struct tty_struct *tty)
-{
-	struct m68k_serial * info = (struct m68k_serial *)tty->driver_data;
-	
-	if (serial_paranoia_check(info, tty->name, "rs_hangup"))
-		return;
-	
-	rs_flush_buffer(tty);
-	shutdown(info);
-	info->event = 0;
-	info->count = 0;
-	info->flags &= ~S_NORMAL_ACTIVE;
-	info->port.tty = NULL;
-	wake_up_interruptible(&info->open_wait);
-}
-
-/*
- * ------------------------------------------------------------
- * rs_open() and friends
- * ------------------------------------------------------------
- */
-static int block_til_ready(struct tty_struct *tty, struct file * filp,
-			   struct m68k_serial *info)
-{
-	DECLARE_WAITQUEUE(wait, current);
-	int		retval;
-	int		do_clocal = 0;
-
-	/*
-	 * If the device is in the middle of being closed, then block
-	 * until it's done, and then try again.
-	 */
-	if (info->flags & S_CLOSING) {
-		interruptible_sleep_on(&info->close_wait);
-#ifdef SERIAL_DO_RESTART
-		if (info->flags & S_HUP_NOTIFY)
-			return -EAGAIN;
-		else
-			return -ERESTARTSYS;
-#else
-		return -EAGAIN;
-#endif
-	}
-	
-	/*
-	 * If non-blocking mode is set, or the port is not enabled,
-	 * then make the check up front and then exit.
-	 */
-	if ((filp->f_flags & O_NONBLOCK) ||
-	    (tty->flags & (1 << TTY_IO_ERROR))) {
-		info->flags |= S_NORMAL_ACTIVE;
-		return 0;
-	}
-
-	if (tty->termios->c_cflag & CLOCAL)
-		do_clocal = 1;
-
-	/*
-	 * Block waiting for the carrier detect and the line to become
-	 * free (i.e., not in use by the callout).  While we are in
-	 * this loop, info->count is dropped by one, so that
-	 * rs_close() knows when to free things.  We restore it upon
-	 * exit, either normal or abnormal.
-	 */
-	retval = 0;
-	add_wait_queue(&info->open_wait, &wait);
-
-	info->count--;
-	info->blocked_open++;
-	while (1) {
-		local_irq_disable();
-		m68k_rtsdtr(info, 1);
-		local_irq_enable();
-		current->state = TASK_INTERRUPTIBLE;
-		if (tty_hung_up_p(filp) ||
-		    !(info->flags & S_INITIALIZED)) {
-#ifdef SERIAL_DO_RESTART
-			if (info->flags & S_HUP_NOTIFY)
-				retval = -EAGAIN;
-			else
-				retval = -ERESTARTSYS;	
-#else
-			retval = -EAGAIN;
-#endif
-			break;
-		}
-		if (!(info->flags & S_CLOSING) && do_clocal)
-			break;
-                if (signal_pending(current)) {
-			retval = -ERESTARTSYS;
-			break;
-		}
-		tty_unlock();
-		schedule();
-		tty_lock();
-	}
-	current->state = TASK_RUNNING;
-	remove_wait_queue(&info->open_wait, &wait);
-	if (!tty_hung_up_p(filp))
-		info->count++;
-	info->blocked_open--;
-
-	if (retval)
-		return retval;
-	info->flags |= S_NORMAL_ACTIVE;
-	return 0;
-}	
-
-/*
- * This routine is called whenever a serial port is opened.  It
- * enables interrupts for a serial port, linking in its S structure into
- * the IRQ chain.   It also performs the serial-specific
- * initialization for the tty structure.
- */
-int rs_open(struct tty_struct *tty, struct file * filp)
-{
-	struct m68k_serial	*info;
-	int 			retval, line;
-
-	line = tty->index;
-	
-	if (line >= NR_PORTS || line < 0) /* we have exactly one */
-		return -ENODEV;
-
-	info = &m68k_soft[line];
-
-	if (serial_paranoia_check(info, tty->name, "rs_open"))
-		return -ENODEV;
-
-	info->count++;
-	tty->driver_data = info;
-	info->port.tty = tty;
-
-	/*
-	 * Start up serial port
-	 */
-	retval = startup(info);
-	if (retval)
-		return retval;
-
-	return block_til_ready(tty, filp, info);
-}
-
-/* Finally, routines used to initialize the serial driver. */
-
-static void show_serial_version(void)
-{
-	printk("MC68328 serial driver version 1.00\n");
-}
-
-static const struct tty_operations rs_ops = {
-	.open = rs_open,
-	.close = rs_close,
-	.write = rs_write,
-	.flush_chars = rs_flush_chars,
-	.write_room = rs_write_room,
-	.chars_in_buffer = rs_chars_in_buffer,
-	.flush_buffer = rs_flush_buffer,
-	.ioctl = rs_ioctl,
-	.throttle = rs_throttle,
-	.unthrottle = rs_unthrottle,
-	.set_termios = rs_set_termios,
-	.stop = rs_stop,
-	.start = rs_start,
-	.hangup = rs_hangup,
-	.set_ldisc = rs_set_ldisc,
-};
-
-/* rs_init inits the driver */
-static int __init
-rs68328_init(void)
-{
-	int flags, i;
-	struct m68k_serial *info;
-
-	serial_driver = alloc_tty_driver(NR_PORTS);
-	if (!serial_driver)
-		return -ENOMEM;
-
-	show_serial_version();
-
-	/* Initialize the tty_driver structure */
-	/* SPARC: Not all of this is exactly right for us. */
-	
-	serial_driver->name = "ttyS";
-	serial_driver->major = TTY_MAJOR;
-	serial_driver->minor_start = 64;
-	serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
-	serial_driver->subtype = SERIAL_TYPE_NORMAL;
-	serial_driver->init_termios = tty_std_termios;
-	serial_driver->init_termios.c_cflag = 
-			m68328_console_cbaud | CS8 | CREAD | HUPCL | CLOCAL;
-	serial_driver->flags = TTY_DRIVER_REAL_RAW;
-	tty_set_operations(serial_driver, &rs_ops);
-
-	if (tty_register_driver(serial_driver)) {
-		put_tty_driver(serial_driver);
-		printk(KERN_ERR "Couldn't register serial driver\n");
-		return -ENOMEM;
-	}
-
-	local_irq_save(flags);
-
-	for(i=0;i<NR_PORTS;i++) {
-
-	    info = &m68k_soft[i];
-	    info->magic = SERIAL_MAGIC;
-	    info->port = (int) &uart_addr[i];
-	    info->port.tty = NULL;
-	    info->irq = uart_irqs[i];
-	    info->custom_divisor = 16;
-	    info->close_delay = 50;
-	    info->closing_wait = 3000;
-	    info->x_char = 0;
-	    info->event = 0;
-	    info->count = 0;
-	    info->blocked_open = 0;
-	    INIT_WORK(&info->tqueue, do_softint);
-	    INIT_WORK(&info->tqueue_hangup, do_serial_hangup);
-	    init_waitqueue_head(&info->open_wait);
-	    init_waitqueue_head(&info->close_wait);
-	    info->line = i;
-	    info->is_cons = 1; /* Means shortcuts work */
-	    
-	    printk("%s%d at 0x%08x (irq = %d)", serial_driver->name, info->line, 
-		   info->port, info->irq);
-	    printk(" is a builtin MC68328 UART\n");
-	    
-#ifdef CONFIG_M68VZ328
-		if (i > 0 )
-			PJSEL &= 0xCF;  /* PSW enable second port output */
-#endif
-
-	    if (request_irq(uart_irqs[i],
-			    rs_interrupt,
-			    IRQF_DISABLED,
-			    "M68328_UART", info))
-                panic("Unable to attach 68328 serial interrupt\n");
-	}
-	local_irq_restore(flags);
-	return 0;
-}
-
-module_init(rs68328_init);
-
-
-
-static void m68328_set_baud(void)
-{
-	unsigned short ustcnt;
-	int	i;
-
-	ustcnt = USTCNT;
-	USTCNT = ustcnt & ~USTCNT_TXEN;
-
-again:
-	for (i = 0; i < ARRAY_SIZE(baud_table); i++)
-		if (baud_table[i] == m68328_console_baud)
-			break;
-	if (i >= ARRAY_SIZE(baud_table)) {
-		m68328_console_baud = 9600;
-		goto again;
-	}
-
-	UBAUD = PUT_FIELD(UBAUD_DIVIDE,    hw_baud_table[i].divisor) | 
-		PUT_FIELD(UBAUD_PRESCALER, hw_baud_table[i].prescale);
-	ustcnt &= ~(USTCNT_PARITYEN | USTCNT_ODD_EVEN | USTCNT_STOP | USTCNT_8_7);
-	ustcnt |= USTCNT_8_7;
-	ustcnt |= USTCNT_TXEN;
-	USTCNT = ustcnt;
-	m68328_console_initted = 1;
-	return;
-}
-
-
-int m68328_console_setup(struct console *cp, char *arg)
-{
-	int		i, n = CONSOLE_BAUD_RATE;
-
-	if (!cp)
-		return(-1);
-
-	if (arg)
-		n = simple_strtoul(arg,NULL,0);
-
-	for (i = 0; i < ARRAY_SIZE(baud_table); i++)
-		if (baud_table[i] == n)
-			break;
-	if (i < ARRAY_SIZE(baud_table)) {
-		m68328_console_baud = n;
-		m68328_console_cbaud = 0;
-		if (i > 15) {
-			m68328_console_cbaud |= CBAUDEX;
-			i -= 15;
-		}
-		m68328_console_cbaud |= i;
-	}
-
-	m68328_set_baud(); /* make sure baud rate changes */
-	return(0);
-}
-
-
-static struct tty_driver *m68328_console_device(struct console *c, int *index)
-{
-	*index = c->index;
-	return serial_driver;
-}
-
-
-void m68328_console_write (struct console *co, const char *str,
-			   unsigned int count)
-{
-	if (!m68328_console_initted)
-		m68328_set_baud();
-    while (count--) {
-        if (*str == '\n')
-           rs_put_char('\r');
-        rs_put_char( *str++ );
-    }
-}
-
-
-static struct console m68328_driver = {
-	.name		= "ttyS",
-	.write		= m68328_console_write,
-	.device		= m68328_console_device,
-	.setup		= m68328_console_setup,
-	.flags		= CON_PRINTBUFFER,
-	.index		= -1,
-};
-
-
-static int __init m68328_console_init(void)
-{
-	register_console(&m68328_driver);
-	return 0;
-}
-
-console_initcall(m68328_console_init);