Fix compile errors in SGI console drivers (linux-next tree)

The below is the patch to replace blindly all possible places,
including Jack's fixes.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
(Reviewed and checked rather than blindly added)
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 26 insertions, 26 deletions

diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c
index d9d4e9552a4..24661cd5e4f 100644
--- a/drivers/serial/68360serial.c
+++ b/drivers/serial/68360serial.c
@@ -393,7 +393,7 @@ static void rs_360_start(struct tty_struct *tty)
 
 static _INLINE_ void receive_chars(ser_info_t *info)
 {
-	struct tty_struct *tty = info->tty;
+	struct tty_struct *tty = info->port.tty;
 	unsigned char ch, flag, *cp;
 	/*int	ignored = 0;*/
 	int	i;
@@ -514,7 +514,7 @@ static _INLINE_ void receive_chars(ser_info_t *info)
 
 static _INLINE_ void receive_break(ser_info_t *info)
 {
-	struct tty_struct *tty = info->tty;
+	struct tty_struct *tty = info->port.tty;
 
 	info->state->icount.brk++;
 	/* Check to see if there is room in the tty buffer for
@@ -528,7 +528,7 @@ static _INLINE_ void transmit_chars(ser_info_t *info)
 {
 
 	if ((info->flags & TX_WAKEUP) ||
-	    (info->tty->flags & (1 << TTY_DO_WRITE_WAKEUP))) {
+	    (info->port.tty->flags & (1 << TTY_DO_WRITE_WAKEUP))) {
 		schedule_work(&info->tqueue);
 	}
 
@@ -584,12 +584,12 @@ static _INLINE_ void check_modem_status(struct async_struct *info)
 		}
 	}
 	if (info->flags & ASYNC_CTS_FLOW) {
-		if (info->tty->hw_stopped) {
+		if (info->port.tty->hw_stopped) {
 			if (status & UART_MSR_CTS) {
 #if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
 				printk("CTS tx start...");
 #endif
-				info->tty->hw_stopped = 0;
+				info->port.tty->hw_stopped = 0;
 				info->IER |= UART_IER_THRI;
 				serial_out(info, UART_IER, info->IER);
 				rs_sched_event(info, RS_EVENT_WRITE_WAKEUP);
@@ -600,7 +600,7 @@ static _INLINE_ void check_modem_status(struct async_struct *info)
 #if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
 				printk("CTS tx stop...");
 #endif
-				info->tty->hw_stopped = 1;
+				info->port.tty->hw_stopped = 1;
 				info->IER &= ~UART_IER_THRI;
 				serial_out(info, UART_IER, info->IER);
 			}
@@ -670,7 +670,7 @@ static void do_softint(void *private_)
 	ser_info_t	*info = (ser_info_t *) private_;
 	struct tty_struct	*tty;
 	
-	tty = info->tty;
+	tty = info->port.tty;
 	if (!tty)
 		return;
 
@@ -693,7 +693,7 @@ static void do_serial_hangup(void *private_)
 	struct async_struct	*info = (struct async_struct *) private_;
 	struct tty_struct	*tty;
 	
-	tty = info->tty;
+	tty = info->port.tty;
 	if (!tty)
 		return;
 
@@ -721,8 +721,8 @@ static int startup(ser_info_t *info)
 
 #ifdef maybe
 	if (!state->port || !state->type) {
-		if (info->tty)
-			set_bit(TTY_IO_ERROR, &info->tty->flags);
+		if (info->port.tty)
+			set_bit(TTY_IO_ERROR, &info->port.tty->flags);
 		goto errout;
 	}
 #endif
@@ -734,12 +734,12 @@ static int startup(ser_info_t *info)
 
 #ifdef modem_control
 	info->MCR = 0;
-	if (info->tty->termios->c_cflag & CBAUD)
+	if (info->port.tty->termios->c_cflag & CBAUD)
 		info->MCR = UART_MCR_DTR | UART_MCR_RTS;
 #endif
 	
-	if (info->tty)
-		clear_bit(TTY_IO_ERROR, &info->tty->flags);
+	if (info->port.tty)
+		clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
 
 	/*
 	 * and set the speed of the serial port
@@ -842,8 +842,8 @@ static void shutdown(ser_info_t *info)
 			smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
 	}
 	
-	if (info->tty)
-		set_bit(TTY_IO_ERROR, &info->tty->flags);
+	if (info->port.tty)
+		set_bit(TTY_IO_ERROR, &info->port.tty->flags);
 
 	info->flags &= ~ASYNC_INITIALIZED;
 	local_irq_restore(flags);
@@ -863,9 +863,9 @@ static void change_speed(ser_info_t *info)
 	volatile struct smc_regs	*smcp;
 	volatile struct scc_regs	*sccp;
 
-	if (!info->tty || !info->tty->termios)
+	if (!info->port.tty || !info->port.tty->termios)
 		return;
-	cflag = info->tty->termios->c_cflag;
+	cflag = info->port.tty->termios->c_cflag;
 
 	state = info->state;
 
@@ -936,24 +936,24 @@ static void change_speed(ser_info_t *info)
 	 * Set up parity check flag
 	 */
 	info->read_status_mask = (BD_SC_EMPTY | BD_SC_OV);
-	if (I_INPCK(info->tty))
+	if (I_INPCK(info->port.tty))
 		info->read_status_mask |= BD_SC_FR | BD_SC_PR;
-	if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
+	if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
 		info->read_status_mask |= BD_SC_BR;
 	
 	/*
 	 * Characters to ignore
 	 */
 	info->ignore_status_mask = 0;
-	if (I_IGNPAR(info->tty))
+	if (I_IGNPAR(info->port.tty))
 		info->ignore_status_mask |= BD_SC_PR | BD_SC_FR;
-	if (I_IGNBRK(info->tty)) {
+	if (I_IGNBRK(info->port.tty)) {
 		info->ignore_status_mask |= BD_SC_BR;
 		/*
 		 * If we're ignore parity and break indicators, ignore 
 		 * overruns too.  (For real raw support).
 		 */
-		if (I_IGNPAR(info->tty))
+		if (I_IGNPAR(info->port.tty))
 			info->ignore_status_mask |= BD_SC_OV;
 	}
 	/*
@@ -1658,7 +1658,7 @@ static void rs_360_close(struct tty_struct *tty, struct file * filp)
 	tty_ldisc_flush(tty);		
 	tty->closing = 0;
 	info->event = 0;
-	info->tty = 0;
+	info->port.tty = NULL;
 	if (info->blocked_open) {
 		if (info->close_delay) {
 			msleep_interruptible(jiffies_to_msecs(info->close_delay));
@@ -1758,7 +1758,7 @@ static void rs_360_hangup(struct tty_struct *tty)
 	info->event = 0;
 	state->count = 0;
 	info->flags &= ~ASYNC_NORMAL_ACTIVE;
-	info->tty = 0;
+	info->port.tty = NULL;
 	wake_up_interruptible(&info->open_wait);
 }
 
@@ -1919,7 +1919,7 @@ static int rs_360_open(struct tty_struct *tty, struct file * filp)
 	printk("rs_open %s, count = %d\n", tty->name, info->state->count);
 #endif
 	tty->driver_data = info;
-	info->tty = tty;
+	info->port.tty = tty;
 
 	/*
 	 * Start up serial port
@@ -1976,7 +1976,7 @@ static inline int line_info(char *buf, struct serial_state *state)
 		info->port = state->port;
 		info->flags = state->flags;
 		info->quot = 0;
-		info->tty = 0;
+		info->port.tty = NULL;
 	}
 	local_irq_disable();
 	status = serial_in(info, UART_MSR);