diff options
| author | Manuel Lauss <manuel.lauss@googlemail.com> | 2010-07-15 21:45:05 +0200 |
|---|---|---|
| committer | Ralf Baechle <ralf@linux-mips.org> | 2010-08-05 13:26:07 +0100 |
| commit | 12bf3f24e07d18ab6c42619be604e269f6738614 (patch) | |
| tree | f53827aa06fbc8aef78ddc58b4b03fa762f41e95 /drivers/serial/8250.c | |
| parent | 42a4f17dc356689075263d7c2bd68456676fa62e (diff) | |
SERIAL: 8250: Remove SERIAL_8250_AU1X00
Remove the SERIAL_8250_AU1X00 config symbol. Instead, use the MIPS_ALCHEMY
one which is always defined when building an Au1x00-based platform.
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: Linux-serial <linux-serial@vger.kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/1461/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This one depends on a previous patch (which removes SOC_AU1X00 and changes
MACH_ALCHEMY) to apply cleanly (and then actually work), so I'd love for
this to go in via the mips tree.
Diffstat (limited to 'drivers/serial/8250.c')
| -rw-r--r-- | drivers/serial/8250.c | 13 |
1 files changed, 3 insertions, 10 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 891e1dd65f2..09ef57034c9 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -302,7 +302,7 @@ static const struct serial8250_config uart_config[] = { }, }; -#if defined (CONFIG_SERIAL_8250_AU1X00) +#if defined(CONFIG_MIPS_ALCHEMY) /* Au1x00 UART hardware has a weird register layout */ static const u8 au_io_in_map[] = { @@ -422,7 +422,6 @@ static unsigned int mem32_serial_in(struct uart_port *p, int offset) return readl(p->membase + offset); } -#ifdef CONFIG_SERIAL_8250_AU1X00 static unsigned int au_serial_in(struct uart_port *p, int offset) { offset = map_8250_in_reg(p, offset) << p->regshift; @@ -434,7 +433,6 @@ static void au_serial_out(struct uart_port *p, int offset, int value) offset = map_8250_out_reg(p, offset) << p->regshift; __raw_writel(value, p->membase + offset); } -#endif static unsigned int tsi_serial_in(struct uart_port *p, int offset) { @@ -503,12 +501,11 @@ static void set_io_from_upio(struct uart_port *p) p->serial_out = mem32_serial_out; break; -#ifdef CONFIG_SERIAL_8250_AU1X00 case UPIO_AU: p->serial_in = au_serial_in; p->serial_out = au_serial_out; break; -#endif + case UPIO_TSI: p->serial_in = tsi_serial_in; p->serial_out = tsi_serial_out; @@ -535,9 +532,7 @@ serial_out_sync(struct uart_8250_port *up, int offset, int value) switch (p->iotype) { case UPIO_MEM: case UPIO_MEM32: -#ifdef CONFIG_SERIAL_8250_AU1X00 case UPIO_AU: -#endif case UPIO_DWAPB: p->serial_out(p, offset, value); p->serial_in(p, UART_LCR); /* safe, no side-effects */ @@ -573,7 +568,7 @@ static inline void _serial_dl_write(struct uart_8250_port *up, int value) serial_outp(up, UART_DLM, value >> 8 & 0xff); } -#if defined(CONFIG_SERIAL_8250_AU1X00) +#if defined(CONFIG_MIPS_ALCHEMY) /* Au1x00 haven't got a standard divisor latch */ static int serial_dl_read(struct uart_8250_port *up) { @@ -2596,11 +2591,9 @@ static void serial8250_config_port(struct uart_port *port, int flags) if (flags & UART_CONFIG_TYPE) autoconfig(up, probeflags); -#ifdef CONFIG_SERIAL_8250_AU1X00 /* if access method is AU, it is a 16550 with a quirk */ if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU) up->bugs |= UART_BUG_NOMSR; -#endif if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ) autoconfig_irq(up); |