summaryrefslogtreecommitdiffstats
path: root/drivers/serial/amba-pl010.c
diff options
context:
space:
mode:
authorRussell King <rmk@dyn-67.arm.linux.org.uk>2007-04-22 12:30:41 +0100
committerRussell King <rmk+kernel@arm.linux.org.uk>2007-04-22 12:30:41 +0100
commited519dede3d705e1c0012acd5b8de4074aa30fa4 (patch)
tree4de79fbb96d8fcbdc84aaf7a1b823b3a628a2a47 /drivers/serial/amba-pl010.c
parent1b0646a033c370d6c7f5390f2cb452cc1884bb5b (diff)
[ARM] Convert AMBA PL010 driver to use the clk infrastructure
Convert the AMBA PL010 serial driver to use the clock infrastructure to allow EP93xx platforms to properly gate the clock to the UARTs. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'drivers/serial/amba-pl010.c')
-rw-r--r--drivers/serial/amba-pl010.c39
1 files changed, 37 insertions, 2 deletions
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index ea49aafd66b..1a9a24b8263 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -48,6 +48,7 @@
#include <linux/serial.h>
#include <linux/amba/bus.h>
#include <linux/amba/serial.h>
+#include <linux/clk.h>
#include <asm/io.h>
@@ -70,6 +71,7 @@
*/
struct uart_amba_port {
struct uart_port port;
+ struct clk *clk;
struct amba_device *dev;
struct amba_pl010_data *data;
unsigned int old_status;
@@ -313,11 +315,20 @@ static int pl010_startup(struct uart_port *port)
int retval;
/*
+ * Try to enable the clock producer.
+ */
+ retval = clk_enable(uap->clk);
+ if (retval)
+ goto out;
+
+ uap->port.uartclk = clk_get_rate(uap->clk);
+
+ /*
* Allocate the IRQ
*/
retval = request_irq(uap->port.irq, pl010_int, 0, "uart-pl010", uap);
if (retval)
- return retval;
+ goto clk_dis;
/*
* initialise the old status of the modem signals
@@ -331,6 +342,11 @@ static int pl010_startup(struct uart_port *port)
uap->port.membase + UART010_CR);
return 0;
+
+ clk_dis:
+ clk_disable(uap->clk);
+ out:
+ return retval;
}
static void pl010_shutdown(struct uart_port *port)
@@ -351,6 +367,11 @@ static void pl010_shutdown(struct uart_port *port)
writel(readb(uap->port.membase + UART010_LCRH) &
~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
uap->port.membase + UART010_LCRH);
+
+ /*
+ * Shut down the clock producer
+ */
+ clk_disable(uap->clk);
}
static void
@@ -540,6 +561,8 @@ pl010_console_write(struct console *co, const char *s, unsigned int count)
struct uart_amba_port *uap = amba_ports[co->index];
unsigned int status, old_cr;
+ clk_enable(uap->clk);
+
/*
* First save the CR then disable the interrupts
*/
@@ -557,6 +580,8 @@ pl010_console_write(struct console *co, const char *s, unsigned int count)
barrier();
} while (status & UART01x_FR_BUSY);
writel(old_cr, uap->port.membase + UART010_CR);
+
+ clk_disable(uap->clk);
}
static void __init
@@ -605,6 +630,8 @@ static int __init pl010_console_setup(struct console *co, char *options)
if (!uap)
return -ENODEV;
+ uap->port.uartclk = clk_get_rate(uap->clk);
+
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
else
@@ -666,12 +693,17 @@ static int pl010_probe(struct amba_device *dev, void *id)
goto free;
}
+ uap->clk = clk_get(&dev->dev, "UARTCLK");
+ if (IS_ERR(uap->clk)) {
+ ret = PTR_ERR(uap->clk);
+ goto unmap;
+ }
+
uap->port.dev = &dev->dev;
uap->port.mapbase = dev->res.start;
uap->port.membase = base;
uap->port.iotype = UPIO_MEM;
uap->port.irq = dev->irq[0];
- uap->port.uartclk = 14745600;
uap->port.fifosize = 16;
uap->port.ops = &amba_pl010_pops;
uap->port.flags = UPF_BOOT_AUTOCONF;
@@ -686,6 +718,8 @@ static int pl010_probe(struct amba_device *dev, void *id)
if (ret) {
amba_set_drvdata(dev, NULL);
amba_ports[i] = NULL;
+ clk_put(uap->clk);
+ unmap:
iounmap(base);
free:
kfree(uap);
@@ -708,6 +742,7 @@ static int pl010_remove(struct amba_device *dev)
amba_ports[i] = NULL;
iounmap(uap->port.membase);
+ clk_put(uap->clk);
kfree(uap);
return 0;
}