diff options
| author | Mark Brown <broonie@opensource.wolfsonmicro.com> | 2010-08-16 18:42:58 +0100 |
|---|---|---|
| committer | Mark Brown <broonie@opensource.wolfsonmicro.com> | 2010-08-16 18:42:58 +0100 |
| commit | e4862f2f6f5653dfb67f3ba2b6f0bc74516ed51a (patch) | |
| tree | 1db5a0540a4eecfad9b7daee476b985e82ddc810 /drivers/serial/bfin_5xx.c | |
| parent | ec62dbd7eb8e3dddb221da89ecbcea0fc3dee8c1 (diff) | |
| parent | b2c1e07b81a126e5846dfc3d36f559d861df59f4 (diff) | |
Merge branch 'for-2.6.36' into for-2.6.37
Fairly simple conflicts, the most serious ones are the i.MX ones which I
suspect now need another rename.
Conflicts:
arch/arm/mach-mx2/clock_imx27.c
arch/arm/mach-mx2/devices.c
arch/arm/mach-omap2/board-rx51-peripherals.c
arch/arm/mach-omap2/board-zoom2.c
sound/soc/fsl/mpc5200_dma.c
sound/soc/fsl/mpc5200_dma.h
sound/soc/fsl/mpc8610_hpcd.c
sound/soc/pxa/spitz.c
Diffstat (limited to 'drivers/serial/bfin_5xx.c')
| -rw-r--r-- | drivers/serial/bfin_5xx.c | 16 |
1 files changed, 9 insertions, 7 deletions
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 96f7e7484fe..a9eff2b18ea 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -797,7 +797,7 @@ static void bfin_serial_shutdown(struct uart_port *port) gpio_free(uart->rts_pin); #endif #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - if (UART_GET_IER(uart) && EDSSI) + if (UART_GET_IER(uart) & EDSSI) free_irq(uart->status_irq, uart); #endif } @@ -869,7 +869,12 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, } baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - quot = uart_get_divisor(port, baud) - ANOMALY_05000230; + quot = uart_get_divisor(port, baud); + + /* If discipline is not IRDA, apply ANOMALY_05000230 */ + if (termios->c_line != N_IRDA) + quot -= ANOMALY_05000230; + spin_lock_irqsave(&uart->port.lock, flags); UART_SET_ANOMALY_THRESHOLD(uart, USEC_PER_SEC / baud * 15); @@ -952,15 +957,12 @@ bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser) * Enable the IrDA function if tty->ldisc.num is N_IRDA. * In other cases, disable IrDA function. */ -static void bfin_serial_set_ldisc(struct uart_port *port) +static void bfin_serial_set_ldisc(struct uart_port *port, int ld) { int line = port->line; unsigned short val; - if (line >= port->state->port.tty->driver->num) - return; - - switch (port->state->port.tty->termios->c_line) { + switch (ld) { case N_IRDA: val = UART_GET_GCTL(&bfin_serial_ports[line]); val |= (IREN | RPOLC); |