Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (36 commits)
  jsm: fixing error if the driver fails to load
  jsm: removing the uart structure and filename on error
  tty: Add a new VT mode which is like VT_PROCESS but doesn't require a VT_RELDISP ioctl call
  tty: Keep the default buffering to sub-page units
  tty: Fix up char drivers request_room usage
  tty: Fix the ldisc hangup race
  serial: timberdale: Remove dependancies
  nozomi: Tidy up the PCI table
  nozomi: Fix mutex handling
  nozomi: Add tty_port usage
  sdio_uart: Use kfifo instead of the messy circ stuff
  serial: bcm63xx_uart: allow more than one uart to be registered.
  serial: bcm63xx_uart: don't use kfree() on non kmalloced area.
  serial: bfin_5xx: pull in linux/io.h for ioremap prototypes
  serial: bfin_5xx: kgdboc should accept gdb break only when it is active
  serial: bfin_5xx: need to disable DMA TX interrupt too
  serial: bfin_5xx: remove useless gpio handling with hard flow control
  Char: synclink, remove unnecessary checks
  tty: declare MODULE_FIRMWARE in various drivers
  ip2: Add module parameter.
  ...

1 files changed, 18 insertions, 20 deletions

diff --git a/drivers/serial/bfin_sport_uart.h b/drivers/serial/bfin_sport_uart.h
index 671d41cc1a3..abe03614e4d 100644
--- a/drivers/serial/bfin_sport_uart.h
+++ b/drivers/serial/bfin_sport_uart.h
@@ -1,29 +1,23 @@
 /*
- * File:	linux/drivers/serial/bfin_sport_uart.h
+ * Blackfin On-Chip Sport Emulated UART Driver
  *
- * Based on:	include/asm-blackfin/mach-533/bfin_serial_5xx.h
- * Author:	Roy Huang <roy.huang>analog.com>
+ * Copyright 2006-2008 Analog Devices Inc.
  *
- * Created:	Nov 22, 2006
- * Copyright:	(C) Analog Device Inc.
- * Description: this driver enable SPORTs on Blackfin emulate UART.
+ * Enter bugs at http://blackfin.uclinux.org/
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
+/*
+ * This driver and the hardware supported are in term of EE-191 of ADI.
+ * http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf
+ * This application note describe how to implement a UART on a Sharc DSP,
+ * but this driver is implemented on Blackfin Processor.
+ * Transmit Frame Sync is not used by this driver to transfer data out.
+ */
+
+#ifndef _BFIN_SPORT_UART_H
+#define _BFIN_SPORT_UART_H
 
 #define OFFSET_TCR1		0x00	/* Transmit Configuration 1 Register */
 #define OFFSET_TCR2		0x04	/* Transmit Configuration 2 Register */
@@ -61,3 +55,7 @@
 #define SPORT_PUT_RCLKDIV(sport, v)	bfin_write16(((sport)->port.membase + OFFSET_RCLKDIV), v)
 #define SPORT_PUT_RFSDIV(sport, v)	bfin_write16(((sport)->port.membase + OFFSET_RFSDIV), v)
 #define SPORT_PUT_STAT(sport, v)	bfin_write16(((sport)->port.membase + OFFSET_STAT), v)
+
+#define SPORT_TX_FIFO_SIZE	8
+
+#endif /* _BFIN_SPORT_UART_H */