Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 290 insertions, 0 deletions

diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
new file mode 100644
index 00000000000..de26cf7b003
--- /dev/null
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -0,0 +1,290 @@
+/*
+ *  linux/drivers/serial/cpm_uart.c
+ *
+ *  Driver for CPM (SCC/SMC) serial ports; CPM1 definitions
+ *
+ *  Maintainer: Kumar Gala (kumar.gala@freescale.com) (CPM2)
+ *              Pantelis Antoniou (panto@intracom.gr) (CPM1)
+ * 
+ *  Copyright (C) 2004 Freescale Semiconductor, Inc.
+ *            (C) 2004 Intracom, S.A.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/device.h>
+#include <linux/bootmem.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <linux/serial_core.h>
+#include <linux/kernel.h>
+
+#include "cpm_uart.h"
+
+/**************************************************************/
+
+void cpm_line_cr_cmd(int line, int cmd)
+{
+	ushort val;
+	volatile cpm8xx_t *cp = cpmp;
+
+	switch (line) {
+	case UART_SMC1:
+		val = mk_cr_cmd(CPM_CR_CH_SMC1, cmd) | CPM_CR_FLG;
+		break;
+	case UART_SMC2:
+		val = mk_cr_cmd(CPM_CR_CH_SMC2, cmd) | CPM_CR_FLG;
+		break;
+	case UART_SCC1:
+		val = mk_cr_cmd(CPM_CR_CH_SCC1, cmd) | CPM_CR_FLG;
+		break;
+	case UART_SCC2:
+		val = mk_cr_cmd(CPM_CR_CH_SCC2, cmd) | CPM_CR_FLG;
+		break;
+	case UART_SCC3:
+		val = mk_cr_cmd(CPM_CR_CH_SCC3, cmd) | CPM_CR_FLG;
+		break;
+	case UART_SCC4:
+		val = mk_cr_cmd(CPM_CR_CH_SCC4, cmd) | CPM_CR_FLG;
+		break;
+	default:
+		return;
+
+	}
+	cp->cp_cpcr = val;
+	while (cp->cp_cpcr & CPM_CR_FLG) ;
+}
+
+void smc1_lineif(struct uart_cpm_port *pinfo)
+{
+	volatile cpm8xx_t *cp = cpmp;
+	unsigned int iobits = 0x000000c0;
+
+	if (!pinfo->is_portb) {
+		cp->cp_pbpar |= iobits;
+		cp->cp_pbdir &= ~iobits;
+		cp->cp_pbodr &= ~iobits;
+	} else {
+		((immap_t *)IMAP_ADDR)->im_ioport.iop_papar |= iobits;
+		((immap_t *)IMAP_ADDR)->im_ioport.iop_padir &= ~iobits;
+		((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits;
+	}
+
+	pinfo->brg = 1;
+}
+
+void smc2_lineif(struct uart_cpm_port *pinfo)
+{
+	/* XXX SMC2: insert port configuration here */
+	pinfo->brg = 2;
+}
+
+void scc1_lineif(struct uart_cpm_port *pinfo)
+{
+	/* XXX SCC1: insert port configuration here */
+	pinfo->brg = 1;
+}
+
+void scc2_lineif(struct uart_cpm_port *pinfo)
+{
+	/* XXX SCC2: insert port configuration here */
+	pinfo->brg = 2;
+}
+
+void scc3_lineif(struct uart_cpm_port *pinfo)
+{
+	/* XXX SCC3: insert port configuration here */
+	pinfo->brg = 3;
+}
+
+void scc4_lineif(struct uart_cpm_port *pinfo)
+{
+	/* XXX SCC4: insert port configuration here */
+	pinfo->brg = 4;
+}
+
+/*
+ * Allocate DP-Ram and memory buffers. We need to allocate a transmit and 
+ * receive buffer descriptors from dual port ram, and a character
+ * buffer area from host mem. If we are allocating for the console we need
+ * to do it from bootmem
+ */
+int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
+{
+	int dpmemsz, memsz;
+	u8 *dp_mem;
+	uint dp_offset;
+	u8 *mem_addr;
+	dma_addr_t dma_addr = 0;
+
+	pr_debug("CPM uart[%d]:allocbuf\n", pinfo->port.line);
+
+	dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos);
+	dp_offset = cpm_dpalloc(dpmemsz, 8);
+	if (IS_DPERR(dp_offset)) {
+		printk(KERN_ERR
+		       "cpm_uart_cpm1.c: could not allocate buffer descriptors\n");
+		return -ENOMEM;
+	}
+	dp_mem = cpm_dpram_addr(dp_offset);
+
+	memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
+	    L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
+	if (is_con) {
+		mem_addr = (u8 *) m8xx_cpm_hostalloc(memsz);
+		dma_addr = 0;
+	} else
+		mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr,
+					      GFP_KERNEL);
+
+	if (mem_addr == NULL) {
+		cpm_dpfree(dp_offset);
+		printk(KERN_ERR
+		       "cpm_uart_cpm1.c: could not allocate coherent memory\n");
+		return -ENOMEM;
+	}
+
+	pinfo->dp_addr = dp_offset;
+	pinfo->mem_addr = mem_addr;
+	pinfo->dma_addr = dma_addr;
+
+	pinfo->rx_buf = mem_addr;
+	pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos
+						       * pinfo->rx_fifosize);
+
+	pinfo->rx_bd_base = (volatile cbd_t *)dp_mem;
+	pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos;
+
+	return 0;
+}
+
+void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
+{
+	dma_free_coherent(NULL, L1_CACHE_ALIGN(pinfo->rx_nrfifos *
+					       pinfo->rx_fifosize) +
+			  L1_CACHE_ALIGN(pinfo->tx_nrfifos *
+					 pinfo->tx_fifosize), pinfo->mem_addr,
+			  pinfo->dma_addr);
+
+	cpm_dpfree(pinfo->dp_addr);
+}
+
+/* Setup any dynamic params in the uart desc */
+int cpm_uart_init_portdesc(void)
+{
+	pr_debug("CPM uart[-]:init portdesc\n");
+
+	cpm_uart_nr = 0;
+#ifdef CONFIG_SERIAL_CPM_SMC1
+	cpm_uart_ports[UART_SMC1].smcp = &cpmp->cp_smc[0];
+/*
+ *  Is SMC1 being relocated?
+ */
+# ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH
+	cpm_uart_ports[UART_SMC1].smcup =
+	    (smc_uart_t *) & cpmp->cp_dparam[0x3C0];
+# else
+	cpm_uart_ports[UART_SMC1].smcup =
+	    (smc_uart_t *) & cpmp->cp_dparam[PROFF_SMC1];
+# endif
+	cpm_uart_ports[UART_SMC1].port.mapbase =
+	    (unsigned long)&cpmp->cp_smc[0];
+	cpm_uart_ports[UART_SMC1].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
+	cpm_uart_ports[UART_SMC1].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
+	cpm_uart_ports[UART_SMC1].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+	cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1;
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SMC2
+	cpm_uart_ports[UART_SMC2].smcp = &cpmp->cp_smc[1];
+	cpm_uart_ports[UART_SMC2].smcup =
+	    (smc_uart_t *) & cpmp->cp_dparam[PROFF_SMC2];
+	cpm_uart_ports[UART_SMC2].port.mapbase =
+	    (unsigned long)&cpmp->cp_smc[1];
+	cpm_uart_ports[UART_SMC2].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
+	cpm_uart_ports[UART_SMC2].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
+	cpm_uart_ports[UART_SMC2].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+	cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2;
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SCC1
+	cpm_uart_ports[UART_SCC1].sccp = &cpmp->cp_scc[0];
+	cpm_uart_ports[UART_SCC1].sccup =
+	    (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC1];
+	cpm_uart_ports[UART_SCC1].port.mapbase =
+	    (unsigned long)&cpmp->cp_scc[0];
+	cpm_uart_ports[UART_SCC1].sccp->scc_sccm &=
+	    ~(UART_SCCM_TX | UART_SCCM_RX);
+	cpm_uart_ports[UART_SCC1].sccp->scc_gsmrl &=
+	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+	cpm_uart_ports[UART_SCC1].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1;
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SCC2
+	cpm_uart_ports[UART_SCC2].sccp = &cpmp->cp_scc[1];
+	cpm_uart_ports[UART_SCC2].sccup =
+	    (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC2];
+	cpm_uart_ports[UART_SCC2].port.mapbase =
+	    (unsigned long)&cpmp->cp_scc[1];
+	cpm_uart_ports[UART_SCC2].sccp->scc_sccm &=
+	    ~(UART_SCCM_TX | UART_SCCM_RX);
+	cpm_uart_ports[UART_SCC2].sccp->scc_gsmrl &=
+	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+	cpm_uart_ports[UART_SCC2].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2;
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SCC3
+	cpm_uart_ports[UART_SCC3].sccp = &cpmp->cp_scc[2];
+	cpm_uart_ports[UART_SCC3].sccup =
+	    (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC3];
+	cpm_uart_ports[UART_SCC3].port.mapbase =
+	    (unsigned long)&cpmp->cp_scc[2];
+	cpm_uart_ports[UART_SCC3].sccp->scc_sccm &=
+	    ~(UART_SCCM_TX | UART_SCCM_RX);
+	cpm_uart_ports[UART_SCC3].sccp->scc_gsmrl &=
+	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+	cpm_uart_ports[UART_SCC3].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3;
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SCC4
+	cpm_uart_ports[UART_SCC4].sccp = &cpmp->cp_scc[3];
+	cpm_uart_ports[UART_SCC4].sccup =
+	    (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC4];
+	cpm_uart_ports[UART_SCC4].port.mapbase =
+	    (unsigned long)&cpmp->cp_scc[3];
+	cpm_uart_ports[UART_SCC4].sccp->scc_sccm &=
+	    ~(UART_SCCM_TX | UART_SCCM_RX);
+	cpm_uart_ports[UART_SCC4].sccp->scc_gsmrl &=
+	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+	cpm_uart_ports[UART_SCC4].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4;
+#endif
+	return 0;
+}