cpm_uart: make it possible to utilize from powerpc

Driver core has been updated to make use of the new powerpc OF-inspired
platform devices, yet keeping compatibility to the vast board list from
ppc.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>

2 files changed, 11 insertions, 13 deletions

diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index 90ff96e3339..dfa06b64495 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -46,6 +46,7 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/delay.h>
+#include <asm/fs_pd.h>
 
 #if defined(CONFIG_SERIAL_CPM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #define SUPPORT_SYSRQ
@@ -1044,11 +1045,11 @@ int cpm_uart_drv_get_platform_data(struct platform_device *pdev, int is_con)
 
 	if (!(r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs")))
 		return -EINVAL;
-	mem = r->start;
+	mem = (u32)ioremap(r->start, r->end - r->start + 1);
 
 	if (!(r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pram")))
 		return -EINVAL;
-	pram = r->start;
+	pram = (u32)ioremap(r->start, r->end - r->start + 1);
 
 	if(idx > fsid_smc2_uart) {
 		pinfo->sccp = (scc_t *)mem;
@@ -1189,11 +1190,7 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
 	if (options) {
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
 	} else {
-		bd_t *bd = (bd_t *) __res;
-
-		if (bd->bi_baudrate)
-			baud = bd->bi_baudrate;
-		else
+		if ((baud = uart_baudrate()) == -1)
 			baud = 9600;
 	}
 
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index ef3bb476c43..02b9ef9abd3 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -40,6 +40,7 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
+#include <asm/fs_pd.h>
 
 #include <linux/serial_core.h>
 #include <linux/kernel.h>
@@ -266,7 +267,7 @@ int cpm_uart_init_portdesc(void)
 	    (unsigned long)&cpm2_immr->im_smc[0];
 	cpm_uart_ports[UART_SMC1].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
 	cpm_uart_ports[UART_SMC1].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-	cpm_uart_ports[UART_SMC1].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+	cpm_uart_ports[UART_SMC1].port.uartclk = uart_clock();
 	cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1;
 #endif
 
@@ -279,7 +280,7 @@ int cpm_uart_init_portdesc(void)
 	    (unsigned long)&cpm2_immr->im_smc[1];
 	cpm_uart_ports[UART_SMC2].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
 	cpm_uart_ports[UART_SMC2].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-	cpm_uart_ports[UART_SMC2].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+	cpm_uart_ports[UART_SMC2].port.uartclk = uart_clock();
 	cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2;
 #endif
 
@@ -293,7 +294,7 @@ int cpm_uart_init_portdesc(void)
 	    ~(UART_SCCM_TX | UART_SCCM_RX);
 	cpm_uart_ports[UART_SCC1].sccp->scc_gsmrl &=
 	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-	cpm_uart_ports[UART_SCC1].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+	cpm_uart_ports[UART_SCC1].port.uartclk = uart_clock();
 	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1;
 #endif
 
@@ -307,7 +308,7 @@ int cpm_uart_init_portdesc(void)
 	    ~(UART_SCCM_TX | UART_SCCM_RX);
 	cpm_uart_ports[UART_SCC2].sccp->scc_gsmrl &=
 	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-	cpm_uart_ports[UART_SCC2].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+	cpm_uart_ports[UART_SCC2].port.uartclk = uart_clock();
 	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2;
 #endif
 
@@ -321,7 +322,7 @@ int cpm_uart_init_portdesc(void)
 	    ~(UART_SCCM_TX | UART_SCCM_RX);
 	cpm_uart_ports[UART_SCC3].sccp->scc_gsmrl &=
 	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-	cpm_uart_ports[UART_SCC3].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+	cpm_uart_ports[UART_SCC3].port.uartclk = uart_clock();
 	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3;
 #endif
 
@@ -335,7 +336,7 @@ int cpm_uart_init_portdesc(void)
 	    ~(UART_SCCM_TX | UART_SCCM_RX);
 	cpm_uart_ports[UART_SCC4].sccp->scc_gsmrl &=
 	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-	cpm_uart_ports[UART_SCC4].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+	cpm_uart_ports[UART_SCC4].port.uartclk = uart_clock();
 	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4;
 #endif