diff options
| author | Ingo Molnar <mingo@elte.hu> | 2008-10-03 19:28:46 +0200 |
|---|---|---|
| committer | Ingo Molnar <mingo@elte.hu> | 2008-10-03 19:28:46 +0200 |
| commit | f68ec0c24755e5cdb779be6240925f2175311d84 (patch) | |
| tree | a7b7128e61a8456385d82bd1c7ca5f14eecbf2ca /drivers/serial/imx.c | |
| parent | 98920dc3d1113b883cbc73e3293446d3525c6042 (diff) | |
| parent | 94aca1dac6f6d21f4b07e4864baf7768cabcc6e7 (diff) | |
Merge commit 'v2.6.27-rc8' into x86/setup
Diffstat (limited to 'drivers/serial/imx.c')
| -rw-r--r-- | drivers/serial/imx.c | 33 |
1 files changed, 25 insertions, 8 deletions
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 64acb39a51b..3f90f1bbbbc 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -44,8 +44,8 @@ #include <asm/io.h> #include <asm/irq.h> -#include <asm/hardware.h> -#include <asm/arch/imx-uart.h> +#include <mach/hardware.h> +#include <mach/imx-uart.h> /* Register definitions */ #define URXD0 0x0 /* Receiver Register */ @@ -127,8 +127,13 @@ #define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */ #define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */ #define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */ -#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz */ -#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz */ +#ifdef CONFIG_ARCH_IMX +#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz, only on mx1 */ +#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz, only on mx1 */ +#endif +#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3 +#define UCR3_RXDMUXSEL (1<<2) /* RXD Muxed Input Select, on mx2/mx3 */ +#endif #define UCR3_INVT (1<<1) /* Inverted Infrared transmission */ #define UCR3_BPEN (1<<0) /* Preset registers enable */ #define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */ @@ -372,7 +377,7 @@ static irqreturn_t imx_rxint(int irq, void *dev_id) { struct imx_port *sport = dev_id; unsigned int rx,flg,ignored = 0; - struct tty_struct *tty = sport->port.info->tty; + struct tty_struct *tty = sport->port.info->port.tty; unsigned long flags, temp; spin_lock_irqsave(&sport->port.lock,flags); @@ -445,7 +450,7 @@ static irqreturn_t imx_int(int irq, void *dev_id) readl(sport->port.membase + UCR1) & UCR1_TXMPTYEN) imx_txint(irq, dev_id); - if (sts & USR1_RTSS) + if (sts & USR1_RTSD) imx_rtsint(irq, dev_id); return IRQ_HANDLED; @@ -598,6 +603,12 @@ static int imx_startup(struct uart_port *port) temp |= (UCR2_RXEN | UCR2_TXEN); writel(temp, sport->port.membase + UCR2); +#if defined CONFIG_ARCH_MX2 || defined CONFIG_ARCH_MX3 + temp = readl(sport->port.membase + UCR3); + temp |= UCR3_RXDMUXSEL; + writel(temp, sport->port.membase + UCR3); +#endif + /* * Enable modem status interrupts */ @@ -1133,13 +1144,19 @@ static int serial_imx_probe(struct platform_device *pdev) if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS)) sport->have_rtscts = 1; - if (pdata->init) - pdata->init(pdev); + if (pdata->init) { + ret = pdata->init(pdev); + if (ret) + goto clkput; + } uart_add_one_port(&imx_reg, &sport->port); platform_set_drvdata(pdev, &sport->port); return 0; +clkput: + clk_put(sport->clk); + clk_disable(sport->clk); unmap: iounmap(sport->port.membase); free: |